Browse by Type

Article

Prajapati, Srichand and Ghosh, Deva Prasad and Wan Yusoff, Wan Ismail (2014) Optimization driven model space approach for gas cloud using full waveform inversion. international petroleum technology conference.

Shah, Syed and Yusof, K. W and Mustaffa, Zahiraniza and Mustafa, A (2014) Concentration of Total Suspended Solids (TSS) Influenced by the Simulated Rainfall Event on Highway Embankment. IACSIT International Journal of Engineering and Technology, 6 (6). pp. 493-496.

., Z Nizamani, VJ Kurian, MS Liew (2014) Determination of environmental load factors for ISO 19902 code in offshore Malaysia using FORM structural reliability method. Determination of environmental load factors for ISO 19902 code in offshore Malaysia using FORM structural reliability method. (Submitted)

., VJ Kurian, MC Voon, MMA Wahab, MS Liew (2014) System Reliability Assessment of Existing Jacket Platforms in Malaysian Waters. System Reliability Assessment of Existing Jacket Platforms in Malaysian Waters. (Submitted)

., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, Puteri Sri Melor (2014) Effect of CNTs dispersion on the thermal and mechanical properties of Cu/CNTs nanocomposites. Effect of CNTs dispersion on the thermal and mechanical properties of Cu/CNTs nanocomposites.

Khalaji Assadi, Morteza (2014) Investigation and Measurement of Copper Nanofluid Impact on Thermal Efficiency of Solar Collectors. MATEC Web of Conferences, 13.

Al-Kayiem, Hussain H. and Lin, S.C. (2014) Performance evaluation of a solar water heater integrated with a PCM nanocomposite TES at various inclinations. Solar Energy, 109 (1). pp. 82-92. ISSN 1471-1257

Habib, Khairul and Saha, Bidyut B. and Koyama, Shigeru (2014) Study of various adsorbenterefrigerant pairs for the application of solar driven adsorption cooling in tropical climates. Applied Thermal Engineering, 72. pp. 266-274. ISSN 13594311

Alashloo, Seyed Yaser Moussavi and Ghosh, Deva Prasad and Wan Yusoff, Wan Ismail (2014) VTI Wave Modeling Using Weak Elastic Anisotropy Approximation. INTEGRATED PETROLEUM ENGINEERING AND GEOSCIENCES.

., VJ Kurian, AA Sebastian, AM Al-Yacouby, MS Liew, VG Idichandy (2014) Wave Forces on Linear Arrays of Rigid Vertical Circular Cylinders in Regular Waves. Wave Forces on Linear Arrays of Rigid Vertical Circular Cylinders in Regular Waves. (Submitted)

GHOSH, DEVA and MUHAMMAD, SAJID and IBRAHIM, NOR AZHAR and VIRATNO, BERNATO (2014) Seismic attributes add a new dimension to prospect evaluation and geomorphology offshore Malaysia. Seismic attributes add a new dimension to prospect evaluation and geomorphology offshore Malaysia.

GHOSH, DEVA and SAJID, MUHAMMAD and IBRAHIM, NOR AZHAR and VIRATNO, BERNATO (2014) Seismic attributes add a new dimension to prospect evaluation and geomorphology offshore Malaysia. THE LEADING EDGE.

David Menier, Yazid Mansor, Benjamin Sautter, Manuel Pubellier, , . (2014) Geomorphology and regional stratigraphic model of Cenozoic deposits from" Continental to Marine" of Western Peninsular Malaysia and Strait of Malacca. Geomorphology and regional stratigraphic model of Cenozoic deposits from" Continental to Marine" of Western Peninsular Malaysia and Strait of Malacca..

Liew, M. S. and Wan Abdullah Zawawi, Noor Amila and Hashim, F.M. (2014) Raising the Skills Bar for Deep Water. Marine Technology.

Liew, Mohd Shahir and Zawawi, Noor Amila and Hashim, F.M. (2014) Raising the Skills Bar for Deep Water. Raising the Skills Bar for Deep Water.

Zawawi, Noor Amila (2014) Excel Through UTP Civil Engineering Programme. New Sunday Times, Learning Curve Section, Educational Supplement.

Sajid, Muhammad and Ghosh, Deva (2014) A fast and simple method of spectral enhancement. society of exploration geophysicists.

Ayman N Qadrouh, José M Carcione, Marco AB Botelho, Zuhar Zahir, . (2014) On optimal NMO and generalised Dix equations for velocity determination and depth conversion. On optimal NMO and generalised Dix equations for velocity determination and depth conversion.

Akbar, A.R. and Awang, M. (2014) Performance prediction of inertial auto-reinforce magnetic flywheel energy storage device using finite element magnetic modeling. Applied Mechanics and Materials, 663. pp. 169-174.

Mohshim, D.F. and Mukhtar, H. and Man, Z. (2014) Effects of ionic liquid blending in polymeric membrane: Physical properties and performance evaluation. Applied Mechanics and Materials, 625. pp. 680-684.

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. (2014) Mathematical modeling of the radial crossflow hollow fiber membrane module for multi-component gas separation. Applied Mechanics and Materials, 625. pp. 726-729.

Maqsood, K. and Ali, A.H. and Shariff, A.B.M. and Ganguly, S. (2014) Techno-economic evaluation of cryogenic networks for separation of CO2 from natural gas. Applied Mechanics and Materials, 625. pp. 635-638.

Memon, M.A. and Salleh, R. and Rosli Baharom, M.N. and Harun, H. (2014) Factors influencing the satisfaction of international postgraduate students in the Malaysian context-A literature review and a proposed model. International Education Studies, 7 (11). pp. 76-83.

Ousta, F. and Yusoff, M.Z. and Kamel, N. and Ali, S. (2014) QoS evolution in 3GPP mobile networks. Research Journal of Applied Sciences, Engineering and Technology, 8 (2). pp. 153-159.

Magzoub, M.A. and Saad, N.B. and Ibrahim, R.B. (2014) Simulation of a ball on a beam model using a fuzzy-dynamic and a fuzzy-static sliding-mode controller. Research Journal of Applied Sciences, Engineering and Technology, 8 (2). pp. 288-295.

Lakshmanan, S. and Murugesan, T. (2014) Adsorption of chlorate from chlor-alkali plant purged brine stream. Applied Mechanics and Materials, 625. pp. 885-888.

Siyal, A.A. and Ismail, L. and Man, Z. and Azizli, K.A. (2014) Effect of NaOH and water contents on solidification of sodium silicate free geopolymer. Applied Mechanics and Materials, 625. pp. 3-6.

Talpur, M.A.H. and Napiah, M. and Chandio, I.A. and Qureshi, T.A. (2014) A comprehensive evaluation of basic health facilities according to local standards and demographic features of umarkot sub-region, Pakistan. Research Journal of Applied Sciences, Engineering and Technology, 7 (22). pp. 4754-4762.

Javed, E. and Faye, I. and Malik, A.S. and Abdullah, J.M. (2014) A hybrid method to improve the reduction of ballistocardiogram artifact from EEG data. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8835. pp. 186-193.

Abdul-Rani, A.M. and Ismail, M.Z. and Zaky, M.A. and Noor, M.H.M. and Zhun, Y.Y. and Ganesan, K. and Rao, T.V.V.L.N. and Kamal, S. and Ginta, T.L. (2014) Improving rate of penetration for PDC drill bit using reverse engineering. Applied Mechanics and Materials, 607. pp. 153-160.

Ho, W.S. and Khor, C.S. and Hashim, H. and Macchietto, S. and Klemeš, J.J. (2014) SAHPPA: A novel power pinch analysis approach for the design of off-grid hybrid energy systems. Clean Technologies and Environmental Policy, 16 (5). pp. 957-970.

Mushtaq, A. and Mukhtar, H. and Shariff, A.M. (2014) Gas permeability and selectivity of synthesized diethanol amine-polysulfone/polyvinylacetate blend membranes. Research Journal of Applied Sciences, Engineering and Technology, 8 (5). pp. 600-605.

Lai, C.-Y. and Zakaria, N. (2014) Towards an intelligent framework for pressure-based 3D curve drawing. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8698 L. pp. 63-72.

Md Akhir, M.K. and Othman, M. and Suleiman, M. and Majid, Z.A. and Sulaiman, J. and Muthuvalu, M.S. and Aruchuan, E. (2014) QSMSOR iterative method for the solution of 2D homogeneous Helmholtz equations. International Journal of Mathematical Analysis, 8 (49-52). pp. 2493-2505.

Iqbal, A. and Jeoti, V. (2014) An improved split-stepwavelet transform method for anomalous radiowave propagation modeling. Radioengineering, 23 (4). pp. 987-996.

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Shakir, I. and Ullah, S. and Sagir, M. (2014) Testing of nickel-chrome alloy as a tip material for multi-tip langmuir probes. Surface Review and Letters, 21 (4).

Khalaji Assadi , Morteza and Habib, Khairul (2014) Solar Energy Potential Estimation in Perak Using Clearness Index and Artificial Neural Network. MATEC Web of Conferences, 3.

Chala, G.T. and Sulaiman, S.A. and Japper-Jaafar, A. and Kamil Wan Abdullah, W.A. and Mior Mokhtar, M.M. (2014) Gas void formation in statically cooled waxy crude oil. International Journal of Thermal Sciences, 86. pp. 41-47.

Kaeomanee, Y. and Dominic, P.D.D. and Rias, R.M. (2014) Examining the social software characteristics and knowledge sharing behaviour among university students in Malaysia. International Journal of Business Information Systems, 17 (1). pp. 67-93.

Pau, J.S. and Pao, W.K.S. and Yong, S.P. and Memon, P.Q. (2014) Capillary pressure and buoyancy effects in the CO2/brine flow system. WIT Transactions on Ecology and the Environment, 186. pp. 613-624.

Al-Kayiem, H.H. and Theeb, M.A.W. (2014) Sustaining thermal power plant production in low water supply regions using cooling towers. WIT Transactions on Ecology and the Environment, 186. pp. 679-690.

Samer, A. and Ali, M. and Basu, P. and Ahmad, F. (2014) Wear resistance of Al-12Si alloys by reinforcing TiC and TiN particles. Journal of Engineering Mechanics, 140 (6).

Ali, T. and Jung, L.T. and Faye, I. (2014) Classification of routing algorithms in volatile environment of underwater wireless sensor Networks. International Journal of Communication Networks and Information Security, 6 (2). pp. 129-147.

Al-Kayiem, H.H. (2014) Visualization of flow field and wake over clean and under-loaded wings. Applied Mechanics and Materials, 629. pp. 24-29.

Ahmad, M.A.R. and Nasiruddin, Z.R. and Rao, T.V.V.L.N. and Altaf, K. (2014) Overcoming limitation in DFM using layer manufacturing. Applied Mechanics and Materials, 660. pp. 94-98.

Johnson, O.A. and Napiah, M. and Kamaruddin, I. (2014) Potential uses of waste sludge in construction industry: A review. Research Journal of Applied Sciences, Engineering and Technology, 8 (4). pp. 565-570.

Soleimani, H. and Yahya, N. and Shameli, K. and Abbas, Z. and Chuan, L.K. and Amighian, J. (2014) S-parameters of bismuth iron garnet (BIG) filled polyvinylidene fluoride composite using rectangular waveguide method. Advanced Materials Research, 1024. pp. 15-18.

Maszelan, C.N.H.C. and Buang, A. (2014) Monoethanolamine (MEA) wastewater treatment using Photo-Fenton oxidation. Applied Mechanics and Materials, 625. pp. 792-795.

Lai, L.S. and Yin Fong, Y. and Che Ani, N. and Kok Keong, L. and Azmi, M.S. (2014) Effect of the solvent molar ratios on the synthesis of zeolitic imidazolate framework 8 (ZIF-8) and its performance in CO2 adsorption. Applied Mechanics and Materials, 625. pp. 69-72.

Oh, P.C. and Mansur, N.A. (2014) Effects of aluminosilicate mineral nano-clay fillers on polysulfone mixed matrix membrane for carbon dioxide removal. Jurnal Teknologi (Sciences and Engineering), 69 (9). pp. 23-27.

Jusoh, N. and Lau, K.K. and Shariff, A.M. (2014) Removal of bulk CO2 from methane with the presenceof heavy hydrocarbon using polyimide membrane. Jurnal Teknologi (Sciences and Engineering), 69 (9). pp. 41-46.

Samsudin, Y.N. and Zulkefely, N.I.F. and Izhar, S.M.M. and Ku Shaari, K.Z. (2014) Effect of nanofillers on the spreading behavior of biopolymer materials on urea surface. Applied Mechanics and Materials, 625. pp. 907-910.

Chin, S.C. and Shafiq, N. and Kusbiantoro, A. and Nuruddin, M.F. (2014) Reinforced concrete deep beams with openings strengthened using FRP � A review. Advanced Materials Research, 1025-1. pp. 938-943.

Sarwar, M. and Abd Majid, M.A.B. (2014) Study of weld hardness of pipes at elevated temperature application in power plants. Advanced Materials Research, 1025-1. pp. 310-316.

Ullah, S. and Bustam, M.A. and Nadeem, M. and Naz, M.Y. and Tan, W.L. and Shariff, A.M. (2014) Synthesis and thermal degradation studies of melamine formaldehyde resins. Scientific World Journal, 2014.

Abdul Karim, S.A. and Mohd Rosli, M.A. and Mohd Mustafa, M.I. (2014) Cubic spline interpolation for petroleum engineering data. Applied Mathematical Sciences, 8 (101-10). pp. 5083-5098.

Sabet, M. and Soleimani, H. (2014) Electron-beam irradiation of halogen free flame retardant polymers for wire and cable applications. Applied Mechanics and Materials, 625. pp. 29-33.

Ahmad, A. and Shah, S.M.U. and Othman, M.F. and Abdullah, M.A. (2014) Biomethane production and palm oil mill effluent treatment by co-cultivation of Nannochloropsis oculata. Applied Mechanics and Materials, 625. pp. 818-821.

Ajab, H. and Khan, A.A.A. and Dennis, J.O. and Abdullah, M.A. (2014) Bismuth-modified hydroxyapatite carbon electrode for heavy metal detection in biomatrices. Applied Mechanics and Materials, 625. pp. 813-817.

Majid, N.D.A. and Shariff, A.M. and Zaki, N.A.M. (2014) Compliance of hot work permit to process safety management (PSM) regulation. Applied Mechanics and Materials, 625. pp. 418-421.

Kaur, R. and Khan, A.A.A. and Dennis, J.O. and Abdullah, M.A. (2014) Screen-printed carbon electrodes for the detection of boldenone. Applied Mechanics and Materials, 625. pp. 809-812.

Shah, S.N. and Mutalib, M.I.A. and Pilus, R.B.M. and Lethesh, K.C. (2014) Separation of naphthenic acid using hydroxide based ionic liquids. Applied Mechanics and Materials, 625. pp. 570-573.

Suleman, H. and Maulud, A.S. and Man, Z. (2014) Comparative study of linear co-volume based mixing rules for equation of state/ excess GIBBS energy (EOS/GE) models for CO2 � MEA and CO2 � MDEA systems. Applied Mechanics and Materials, 625. pp. 541-544.

Shaikh, M.S. and Shariff, A.M. and Bustam, M.A. and Murshid, G. (2014) Study of CO2 solubility in aqueous blend of potassium carbonate promoted with glycine. Applied Mechanics and Materials, 625. pp. 19-23.

Muniandy, M.A.P. and Sulaiman, S. (2014) An exploratory study on blind users' mental model in computer accessibility. ARPN Journal of Engineering and Applied Sciences, 9 (7). pp. 1005-1011.

El-Harbawi, M. and Samir, B.B. and Babaa, M.-R. and Mutalib, M.I.A. (2014) A New QSPR Model for Predicting the Densities of Ionic Liquids. Arabian Journal for Science and Engineering, 39 (9). pp. 6767-6775.

Karim, S.A.A. and Kong, V.P. (2014) Convexity-preserving using rational cubic spline interpolation. Research Journal of Applied Sciences, Engineering and Technology, 8 (3). pp. 312-320.

Montasir, O.A. and Yenduri, A. and Kurian, V.J. (2014) Effect of mooring line properties and fairlead slopes on the restoring behavior of offshore mooring system. Research Journal of Applied Sciences, Engineering and Technology, 8 (3). pp. 346-353.

Rahmiati, T. and Azizli, K.A. and Man, Z. and Ismail, L. and Nuruddin, M.F. (2014) The effect of KOH concentration on setting time and compressive strength of fly ash-based geopolymer. Applied Mechanics and Materials, 625. pp. 94-97.

Abunowara, M. and Eldemerdash, U. and Awang, M. and Mady, H. (2014) Evaluation of carbon dioxide adsorption on Malaysian coals for potential sequestration. Applied Mechanics and Materials, 625. pp. 184-187.

Fatah, I.Y.A. and Abdul Khalil, H.P.S. and Hossain, M.S. and Aziz, A.A. and Davoudpour, Y. and Dungani, R. and Bhat, A. (2014) Exploration of a chemo-mechanical technique for the isolation of nanofibrillated cellulosic fiber from oil palm empty fruit bunch as a reinforcing agent in composites materials. Polymers, 6 (10). pp. 2611-2624.

Guangul, F.M. and Sulaiman, S.A. and Ramli, A. (2014) Study of the effects of operating factors on the resulting producer gas of oil palm fronds gasification with a single throat downdraft gasifier. Renewable Energy, 72. pp. 271-283.

Mohammed, B.S. and Ibrahim, R.B. and Perumal, N. and Rama Rao, K.S. (2014) Comparison of multi-carriers based PWM for multilevel converters. International Review on Modelling and Simulations, 7 (3). pp. 363-378.

Bin Md Seri, S. and Bin Abdul Karim, Z.A. and Bin Salleh, H. and Mohideen Batcha, M.F. and Raghavan, V.R. (2014) Hydrodynamic characteristics of flow around tube bank with integral wake splitter. Applied Mechanics and Materials, 660. pp. 649-653.

Khan, H. and Dominic, P.D.D. (2014) User acceptance of online system: A study of banking and airline sector. International Journal of Business Information Systems, 16 (4). pp. 359-374.

Aruchunan, E. and Muthuvalu, M.S. and Sulaiman, J. and Koh, W.S. and Akhir, K.M. (2014) An iterative solution for second order linear Fredholm integro-differential equations. Malaysian Journal of Mathematical Sciences, 8 (2). pp. 157-170.

Kim, D.K. and Paik, J.K. (2014) Ultimate strength performance of tankers with various corrosion additions. Naval Architect (JUL-AU). pp. 54-56.

Lawal, D.U. and Matori, A.-N. and Yusof, K.W. and Hashim, A.M. and Aminu, M. and Sabri, S. and Balogun, A.-L. and Chandio, I.A. and Mokhtar, M.R.M. (2014) group-based decision support for flood hazard forecasting: A geospatial technology-based group analytic hierarchy process approach. Research Journal of Applied Sciences, Engineering and Technology, 7 (23). pp. 4838-4850.

Asadpour, R. and Sapari, N.B. and Isa, M.H. and Orji, K.U. (2014) Enhancing the hydrophobicity of mangrove bark by esterification for oil adsorption. Water Science and Technology, 70 (7). pp. 1220-1228.

Wong, M.K. and Bustam, M.A. and Shariff, A.M. (2014) Raman spectroscopic study for the determination of monoethanolamine concentration. Applied Mechanics and Materials, 625. pp. 709-713.

Nasir, R. and Mukhtar, H. and Man, Z. (2014) Fabrication and characterization of facilitated transport membrane for gas separation. Applied Mechanics and Materials, 625. pp. 533-536.

Sajid, M. and Ghosh, D. (2014) Logarithm of short-time Fourier transform for extending the seismic bandwidth. Geophysical Prospecting, 62 (5). pp. 1100-1110.

Alnarabiji, M.S. and Yahya, N. and Bee Abd Hamid, S. and Azizi, K. and Shafie, A. and Solemani, H. (2014) Microwave synthesis of ZnO nanoparticles for enhanced oil recovery. Advanced Materials Research, 1024. pp. 83-86.

Ousta, F. and Kamel, N. and Yusoff, M.Z. and Ali, S. (2014) Mapping QoS classes in loose coupling heterogeneous networks. Research Journal of Applied Sciences, Engineering and Technology, 8 (16). pp. 1777-1780.

Shahzad, A. and Saad, M.N.M. and Walter, N. and Malik, A.S. and Meriaudeau, F. (2014) A review on subcutaneous veins localization using imaging techniques. Current Medical Imaging Reviews, 10 (2). pp. 125-133.

Shabib-asl, A. and Ayoub, M.A. and Alta'ee, A.F. and Saaid, I.B.M. and Valentim, P.P.J. (2014) Comprehensive review of foam application during foam assisted water alternating gas (FAWAG) method. Research Journal of Applied Sciences, Engineering and Technology, 8 (17). pp. 1896-1904.

Sabet, M. and Soleimani, H. and Hassan, A. and Ratnam, C.T. (2014) Electron Beam Irradiation of LDPE Filled with Calcium Carbonate and Metal Hydroxides. Polymer - Plastics Technology and Engineering, 53 (13). pp. 1362-1366.

Almahasneh, H. and Chooi, W.-T. and Kamel, N. and Malik, A.S. (2014) Deep in thought while driving: An EEG study on drivers' cognitive distraction. Transportation Research Part F: Traffic Psychology and Behaviour, 26 (PA). pp. 218-226.

Al-Jemeli, M. and Hussin, F.A. (2014) On location estimation methods for mobile wireless sensor nodes. Research Journal of Applied Sciences, Engineering and Technology, 8 (1). pp. 124-130.

Yusup, S. (2014) Response to "comment on study of fuel properties of rubber seed oil based biodiesel" Energy Convers. Manage. 2014;78:266-275 by Ahmad et al. Energy Conversion and Management, 86. pp. 1189-1192.

Ratnam, K.A. and Dominic, P.D.D. (2014) The factors associating the adoption of cloud computing: An enhancement of the healthcare ecosystem in Malaysia. International Journal of Business Information Systems, 16 (4). pp. 462-479.

Mushtaq, M. and Isa, M Tan and Nadeem, M. and Devi, Cecilia and Lee, Susan Y. C. and Sagir, M. (2014) A Convenient Route For The Alkoxylation Of Biodiesel And Its Influence On Cold Flow Properties. International Journal of Green Energy, 11 (3). pp. 267-279.

Bokhari, Awais and Yusup, Suzana and Ahmad, Junaid and Kamil, Ruzaimah N. M. (2014) Blending Study of Palm Oil Methyl Esters with Rubber Seed Oil Methyl Esters to Improve Biodiesel Properties. Chemical Engineering Transaction. ISSN 1974-9791 (Submitted)

Mohmmed, A. O and Al-Kayiem , H. H. and Nasif, M. S. and Mohammed, Z. I (2014) Finite Element Analysis of Fatigue in Pipelines Due To Slug Flow. Advanced Materials Research, 845. pp. 271-276.

Ramli, A. and Ahmed, S. and Yusup, S. (2014) Adsorption behaviour of Si-MCM-41 for CO2: Effect of pressure and temperature on adsorption. Chemical Engineering Transactions, 39 (Specia). pp. 271-276.

Ramli, Raihan Mahirah and Chong, Fai Kait and Omar, Abdul Aziz (2014) Visible-Light Photodegradation of Diisopropanolamine using Bimetallic Cu-Fe/TiO2 photocatalyst. Advanced Materials Research, 845. pp. 421-425. ISSN 1662-8985

Chong, Fai Kait and Nurlaela, Ela and Dutta, Binay Kanti (2014) Impact of Glycerol as Scavenger for Solar Hydrogen Production from Water. INTERNATIONAL JOURNAL of ENERGY and ENVIRONMENT. pp. 19-26. ISSN 2308-1007

Prajapati, Srichand and Ghosh, Deva (2014) A Simple and Fast Algorithm to Estimate Effective Anisotropy Parameters. 76th EAGE Conference & Exhibition 2014.

Sajid, Muhammad and Ghosh, Deva Prasad (2014) Increasing the Robustness of Homomorphic Deconvolution for Non-Stationary Seismic Wavelet. Asian Journal of Earth Sciences. ISSN 1819-1886

Abdul Latiff, Abdul Halim and Ghosh, Deva Prasad and Tuan Harith, Zuhar Zahir and Jamaludin, Siti Nur Fathiyah (2014) Seismic Illumination Analysis in Poor Quality Data Using Focal Beam Method: Full 3D vs. Conventional 3D Acquisition Design. Journal of Applied Sciences. ISSN 18125654

Sajid, Muhammad and Ghosh, Deva Prasad and Shahzad, Muhammad (2014) Non-stationary 1-D Thin Bed Model for Non-stationary Frequency Bandwidth Expansion Algorithms. Journal of Applied Sciences. ISSN 18125654

Hermana , Maman and Tuan Harith, Zuhar Zahir and Sum, Chow Weng and Ghosh, Deva Prasad (2014) Is the Qp/Qs Attribute Better for Hydrocarbon Prediction? Journal of Applied Sciences. ISSN 18125654

Abdul Latiff, Abdul Halim and Ghosh, Deva Prasad and Tuan Harith, Zuhar Zahir (2014) An Integrated Method of Subsurface Illumination Analysis for Shallow Gas Anomaly Data. IPTC.

Jamaludin, Siti Nur Fathiyah and Pubellier, Manuel and Ghosh, Deva Prasad and Menier, David and Pierson, Bernard (2014) The Role of Faulting on the Growth of a Carbonate Platform: Evidence from 3D Seismic Analysis and Section Restoration. Geophysical Research Abstracts.

Prajapati, Srichand and Ghosh, Deva Prasad and Wan Yusoff, Wan Ismail (2014) Optimization Driven Model-Space Approach for Gas Clouds Using Full Waveform Inversion. IPTC.

Satti, Iftikhar Ahmed and Ghosh, Deva Prasad and Wan Yusoff, Wan Ismail (2014) Analysis of Overpressure Mechanism in a Field of Southwestern Malay Basin. Offshore Technology Conference.

Shahbazi, Aamin and Ghosh, Deva Prasad and Solemani, Mehrdad and Mann, Juergen (2014) Solving the Conflicting Dips Problem in Complex Media by Considering all Possible Dips in CRS Method. IPTC.

Ali, Basil and Gilani, Syed Ihtsham-ul-Haq and Al-Kayiem, Hussain H. (2014) Investigation of evacuated tube collector performance at high temperature mode using TRNSYS simulation model. Applied Mechanics and Materials , 465. pp. 155-160.

Khalaji Assadi, Morteza (2014) Technical-Economic Analysis of Steam Double Effect Absorption Chiller-Heaters Equipped with Solar Heat Pipe System. Applied Mechanics and Materials, 465-46. pp. 327-334.

Abd Majid, Mohd Amin and Sulaiman, S. A. and Fujii, Tatsuo and Naono, Naono (2014) Studies on Steam Absorption Chillers Performance at a Cogeneration Plant. MATEC Web of Conference 13, 05003 (2014).

Khalaji Assadi, Morteza (2014) Skylight Application for Natural Lighting in a Building; the University of Tehran Branch of Melli Bank Case Study. MATECWeb of Conferences13,06003, 13.

KHALAJI ASSADI, M (2014) THERMODYNAMIC ASSESSMENT OF A HYBRID SOFC/GT CYCLE CONSIDERING OXY-ANODE COMBUSTION CO2 CAPTURE TECHNOLOGY. Indian J.Sci.Res.3 (1): 148-172, 2014, 1 (3). pp. 148-172. ISSN ISSN : 0976-2876 (Print), ISSN : 2250-0138 (Online)

Lee, K. and Saipolbahri, Z.A. and Guan, B.H. and Soleimani, H. (2014) Organic sol-gel method in the synthesis and characterization of zinc oxide nanoparticles. American Journal of Applied Sciences, 11 (8). pp. 1250-1254.

Alipour Moghadam, R. and Yusup, S. and Azlina, W. and Nehzati, S. and Tavasoli, A. (2014) Investigation on syngas production via biomass conversion through the integration of pyrolysis and air-steam gasification processes. Energy Conversion and Management, 87. pp. 670-675.

Al-Jemeli, Marwan and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2014) On Location Estimation Methods For Mobile Wireless Sensor Networks. Research Journal of Applied Sciences, Engineering and Technology, 8 (1). pp. 124-130. ISSN 2040-7467

Shaheen, Ateeq-Ur-Rehman and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2014) A Review on Structural Software-Based Self- Testing of Embedded Processors. International Review on Computers and Software (IRECOS), 9 (5). ISSN 1828-6011

Mohammadat, Mohamed Tag Elsir and Zain Ali , Noohul Basheer and Hussin, Fawnizu Azmadi and Zwolinski, Mark (2014) Multivoltage Aware Resistive Open Fault Model. IEEE Transactions on Very Large Scale Integration (VLSI) Systems, 22 (2). pp. 220-231. ISSN 1063-8210

., M Waris, Mohd Shahir Liew, Mohd Faris Khamidi, Arazi Idrus (2014) Criteria for the selection of sustainable onsite construction equipment. Criteria for the selection of sustainable onsite construction equipment.

., Ali Samer Muhsan, Faiz Ahmad, Norani M. Mohamed, Puteri Sri Melo (2014) Homogeneous Distribution of Carbon Nanotubes in Copper Matrix Nanocomposites Fabricated via Combined Technique. Homogeneous Distribution of Carbon Nanotubes in Copper Matrix Nanocomposites Fabricated via Combined Technique. (Submitted)

., Iman Eslami Afrooz, Puteri Sri Melor Binti Megat Yusoff, Faiz Ah (2014) A Numerical Analysis for Predicting the Thermal Conductivity of Carbon Nanotube Reinforced Copper-Matrix Nanocomposites. A Numerical Analysis for Predicting the Thermal Conductivity of Carbon Nanotube Reinforced Copper-Matrix Nanocomposites.

., M Irfan Shirazi, Faiz Ahmad, M Rafi Raza, Ali S Muhsan, MA Omer, (2014) Orientation of Carbon Fibers in Copper matrix Produced by Powder Injection Molding. Orientation of Carbon Fibers in Copper matrix Produced by Powder Injection Molding.

., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, Puteri Sri Melor (2014) Experimental Preparation and Numerical Simulation of High Thermal Conductive Cu/CNTs Nanocomposites. Experimental Preparation and Numerical Simulation of High Thermal Conductive Cu/CNTs Nanocomposites.

., Faiz Ahmad, Muhammad Aslam, M Rafi Raza, Ali S Muhsan (2014) Experimental Investigation on Thermal Conduction of Carbon Nanotubes Reinforced Copper Matrix Composites. Experimental Investigation on Thermal Conduction of Carbon Nanotubes Reinforced Copper Matrix Composites.

., Abdul Halim Abdul Latiff, Deva Prasad Ghosh, Zuhar Zahir Tuan Ha (2014) Seismic Illumination Analysis in Poor Oil & Gas Field Data by Using Focal Beam Method. Seismic Illumination Analysis in Poor Oil & Gas Field Data by Using Focal Beam Method.

Goh Thian Lai, Abdul Ghani Rafek, Ailie Sofyiana Serasa, Norbert, . (2014) Empirical correlation of uniaxial compressive strength and primary wave velocity of Malaysian granites. Empirical correlation of uniaxial compressive strength and primary wave velocity of Malaysian granites.

Norbert Simon, Rodeano Roslee, Nightingle Lian Marto, Juhari Mat, . (2014) Lineaments and their association with landslide occurrences along the Ranau-Tambunan road, Sabah. Lineaments and their association with landslide occurrences along the Ranau-Tambunan road, Sabah.

Manoj Mathew, David Menier, Abdul Hadi Abdul Rahman, Manuel Pube, . (2014) Tectonic and eustatic controls on Miocene sedimentation of Nyalau Formation (Sarawak, Borneo). Tectonic and eustatic controls on Miocene sedimentation of Nyalau Formation (Sarawak, Borneo).

SN Fathiyah Jamaludin, Manuel Pubellier, David Menier, . (2014) Relation of Syn-Depositional Faulting with Carbonate Growth using Miocene Carbonate Platforms of Central Luconia Province, Malaysia. Relation of Syn-Depositional Faulting with Carbonate Growth using Miocene Carbonate Platforms of Central Luconia Province, Malaysia.

Affam, A.C. and Chaudhuri, M. and Kutty, S.R.M. (2014) Optimization of modified fenton (FeGAC/ H2O2) pretreatment of antibiotics. Pertanika Journal of Science and Technology, 22 (1). pp. 239-254.

Jilani, M.T. and Wen, W.P. and Cheong, L.Y. and Zakariya, M.A. and Rehman, M.Z.U. (2014) Equivalent circuit modeling of the dielectric loaded microwave biosensor. Radioengineering, 23 (4). pp. 1038-1047.

Nasir, R. and Mukhtar, H. and Man, Z. and Bt. Shaharun, M.S. and Abu Bakar, M.Z. (2014) Performance enhancement of mixed matrix membranes through the incorporation of alkanolamines for CO2/CH4 separation. ASEAN Journal of Chemical Engineering, 14 (2). pp. 28-37.

Foong, O.-M. and Yong, S.-P. and Lee, A.-L. (2014) Text summarization in android mobile devices. Lecture Notes in Electrical Engineering, 285 LN. pp. 571-578.

Alhussian, H. and Zakaria, N. and Hussin, F.A. and Bahbouh, H.T. (2014) A modified LRE-TL real-time multiprocessor scheduling algorithm. Lecture Notes in Electrical Engineering, 285 LN. pp. 335-344.

Ali, T. and Jung, L.T. and Faye, I. (2014) A reliable data flooding in underwater wireless sensor network. Lecture Notes in Electrical Engineering, 285 LN. pp. 499-511.

Mubashir, M. and Fong, Y.Y. and Keong, L.K. and Bin Sharrif, M.A. (2014) Synthesis and performance of deca-dodecasil 3 rhombohedral (DDR)-type zeolite membrane in co2 separation�a review. ASEAN Journal of Chemical Engineering, 14 (2). pp. 48-57.

Hussain, I. and Ullah, R. and AbdElsalam, N.M. and Hayat, S. and Uddin, K. and Khan, J. and Akhtar, N. and Ullah, Z. (2014) Antibacterial and preliminary phytochemicals screening of theraxicum officinale. Journal of Pure and Applied Microbiology, 8. pp. 535-538.

Kee, K.E. and Richter, S. and Babic, M. and Nesic, S. (2014) Flow patterns and water wetting in oil-water two phase flow - A flow loop study. NACE - International Corrosion Conference Series.

Wagdy, M. and Faye, I. and Rohaya, D. (2014) Border noise removal and clean up based on retinex theory. Lecture Notes in Electrical Engineering, 285 LN. pp. 345-352.

Kajo, I. and Kamel, N. and Malik, A.S. (2014) A comparison study on different crowd motion estimation algorithms using matlab. Lecture Notes in Electrical Engineering, 285 LN. pp. 327-334.

Sulaiman, S.A. and Zin, N.A.M. (2014) On gasifier cookstove operation fuelled by different lignocellulosic biomass materials. Journal of Mechanical Engineering, 11 (1). pp. 45-54.

Ching, O.P. and Bak Lung, M.W. (2014) Effects of montmorillonite (MMT) inorganic fillers on polyvinylidene (PVDF) mixed matrix membrane. Applied Mechanics and Materials, 625. pp. 696-700.

Kutty, S.R.M. and Isa, M.H. and Nasiru, A. and Salihi, I.U. and Ezerie, H. (2014) Potential of the compact extended aeration reactor (CEAR) as an integrated system to biologically degrade municipal sewage according to Malaysian regulatory limits: Design, process and performance. WIT Transactions on Ecology and the Environment, 186. pp. 269-279.

Idaham, N.F. and Bustam, M.A. and Kait, C.F. and Man, Z. (2014) Recovery of 1-butyl-3-methylimidazolium-based ionic liquids. Advanced Materials Research, 879. pp. 230-236.

Bustam, M.A. and Muhamad, A.H. and Gonfa, G. and Man, Z. (2014) Benzene and cyclohexane separation using 1-propanenitrile-3-butylimidazolium dicyanamide ionic liquid. Advanced Materials Research, 879. pp. 58-62.

Izyan, Z.N. and Shuhaimi, M. (2014) Exergy analysis for fuel reduction strategies in crude distillation unit. Energy, 66. pp. 891-897.

Elsheikh, Y.A. and Man, Z. and Bustam, M.A. and Akhtar, F.H. and Yusup, S. and Muhammad, A. (2014) Preparation and characterisation of Citrulus colocynthis oil biodiesel: Optimisation of alkali-catalysed transesterification. Canadian Journal of Chemical Engineering, 92 (3). pp. 435-440.

Shah, S.M.U. and Che Radziah, C. and Ibrahim, S. and Latiff, F. and Othman, M.F. and Abdullah, M.A. (2014) Effects of photoperiod, salinity and pH on cell growth and lipid content of Pavlova lutheri. Annals of Microbiology, 64 (1). pp. 157-164.

Aziz, H.A. and Shariff, A.M. and Rusli, R. (2014) Managing process safety information based on process safety management requirements. Process Safety Progress, 33 (1). pp. 41-48.

Sajid, M. and Ghosh, D.P. and Satti, I.A. (2014) Comparative study of new signal processing to improve S/N ratio of seismic data. Journal of Petroleum Exploration and Production Technology, 4 (1). pp. 87-96.

Hani, A.F.M. and Sathyamoorthy, D. and Asirvadam, V.S. (2014) Computing uncertainty of physiographic features extracted from multiscale digital elevation models. Computers and Geosciences, 64. pp. 15-23.

Amir Khan, M. and Hasbullah, H. and Nazir, B. (2014) Providing optimal percentage reduction in coverage for mobile sensor networks. Life Science Journal, 11 (SPEC. ). pp. 136-142.

Khan, Z. and Yusup, S. and Ahmad, M.M. and Rashidi, N.A. (2014) Integrated catalytic adsorption (ICA) steam gasification system for enhanced hydrogen production using palm kernel shell. International Journal of Hydrogen Energy, 39 (7). pp. 3286-3293.

Dahalan, A.A. and Sulaiman, J. and Muthuvalu, M.S. (2014) Performance of HSAGE method with seikkala derivative for 2-D fuzzy poisson equation. Applied Mathematical Sciences, 8 (17-20). pp. 885-899.

Karuppanan, S. and Abdul Wahab, A. and Patil, S. and Zahari, M.A. (2014) Estimation of burst pressure of corroded pipeline using finite element analysis (FEA). Advanced Materials Research, 879. pp. 191-198.

Md Nurul, S. and Azmi Bustam, M. and Yunus, M.N. and Man, Z. (2014) Solid supported hmimTf2N for CO2 adsorption. Advanced Materials Research, 879. pp. 149-154.

Hussin, H. and Mokhtar, A.A. and Muhammad, M. (2014) Identification of critical factors to system performance using availability modeling and simulation analysis. Applied Mechanics and Materials, 490-49. pp. 1759-1763.

Niaz Akhtar, M. and Nasir, N. and Kashif, M. and Yahya, N. and Ahmad, M. and Murtaza, G. and Azhar Khan, M. and Asif, M.H. and Sattar, A. and Raza, R. and Saleem, M. and Khan, S.N. (2014) Mn0.8Zn0.2Fe2O4 nanoparticulates spinel ferrites: An approach to enhance the antenna field strength for improved magnitude versus offset (MVO). Progress in Natural Science: Materials International, 24 (4). pp. 364-372.

Shakir, M. and Malik, A.S. and Kamel, N. and Qidwai, U. (2014) Embedded wearable EEG seizure detection in ambulatory state. International Journal of Simulation: Systems, Science and Technology, 15 (3). pp. 1-6.

Teo, W. and Dipl-Ing, G.M. (2014) Shear effectiveness of shallow-angle bent-up bars for reinforced concrete beams. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 167 (7). pp. 398-413.

Soleimani, H. and Latiff, N.R.A. and Yahya, N. and Zaid, H.M. and Sabet, M. and Guan, B.H. and Chuan, L.K. (2014) Effect of annealing temperature on the crystallization of hematite-alumina (Fe2O3-Al2O3 ) nanocomposite and its influence in EOR application. Journal of Nano Research, 29. pp. 105-113.

Idaham, N.F. and Bustam Khalil, M.A. and Kait, C.F. (2014) Study on the recovery of 1-butyl-3-methylimidazolium-based ionic liquids. Applied Mechanics and Materials, 625. pp. 144-147.

Almustapha, S. and Ali Khan, A.A. and Omar, A.A. and Ariwahjoedi, B. and Abdullah, M.A. (2014) Cellulose-modified carbon electrode for in situ lead detection. Applied Mechanics and Materials, 625. pp. 136-139.

Hayder, G. and Ramli, M.Z. and Malek, M.A. and Khamis, A. and Hilmin, N.M. (2014) Prediction model development for petroleum refinery wastewater treatment. Journal of Water Process Engineering, 4 (C). pp. 1-5.

Aziz, H.A. and Shariff, A.M. and Rusli, R. and Yew, K.H. (2014) Managing process chemicals, technology and equipment information for pilot plant based on Process Safety Management standard. Process Safety and Environmental Protection, 92 (5). pp. 423-429.

Ahmad, A. and Shah, S.M.U. and Othman, M.F. and Abdullah, M.A. (2014) Enhanced palm oil mill effluent treatment and biomethane production by co-digestion of oil palm empty fruit bunches with Chlorella Sp. Canadian Journal of Chemical Engineering, 92 (9). pp. 1636-1642.

Khan, F.A. and Zahoor, M. and Ullah, R. and Abd El-Salam, N.M. and Khan, J. and Ullah, N. and Ullah, Z. (2014) Assessment of mycobiota and aflatoxins in poultry feeds collected from poultry farms. Journal of Pure and Applied Microbiology, 8. pp. 437-445.

Ahmad, R. and Saknakosnak, P. and Hooi, Y.K. (2014) Excel-database converting system using data normalization technique. Lecture Notes in Electrical Engineering, 285 LN. pp. 23-30.

Abdel-Aty, A.-H. and Zakaria, N. and Cheong, L.Y. and Metwally, N. (2014) Effect of the spin-orbit interaction on partial entangled quantum network. Lecture Notes in Electrical Engineering, 285 LN. pp. 529-537.

Fageeri, S.O. and Ahmad, R. and Baharudin, B. (2014) A log file analysis technique using binary-based approach. Lecture Notes in Electrical Engineering, 285 LN. pp. 3-11.

Ab. Rahim, L.B. and Bhattacharjee, S. and Aziz, I.B.A. (2014) An audio steganography technique to maximize data hiding capacity along with least modification of host. Lecture Notes in Electrical Engineering, 285 LN. pp. 277-289.

Faiz, A. and Sami, U. and Hammad, A. and Nor Sharifah, O. (2014) Thermal performance of glass fiber reinforced intumescent fire retardant coating for structural applications. Malaysian Journal of Microscopy, 10 (1). pp. 92-98.

Waris, M. and Shahir Liew, M. and Khamidi, M.F. and Idrus, A. (2014) Criteria for the selection of sustainable onsite construction equipment. International Journal of Sustainable Built Environment, 3 (1). pp. 96-110.

Jaber, A.K. and Shuker, M.T. (2014) Integrated petrophysical evaluation of a heterogeneous shaly-sand reservoir: A case study in nahr umr formation-subba giant oil field, Iraq. Research Journal of Applied Sciences, Engineering and Technology, 8 (24). pp. 2388-2402.

Al-Azawie, S.S. and Hassan, S. and Zammeri, M.F. (2014) Experimental and numerical study on ground material absorptivity for solar chimney power applications. WIT Transactions on Ecology and the Environment, 186. pp. 219-230.

Khan, H. and Daraz, N. and Khan, M.N. and Said, M. and Akhtar, N. and Badshah, A. and Khan, A.S. and Ali, M. (2014) Synthesis, Structural Characterization, and Evaluation of the Biological Properties of Heteroleptic Palladium(II) Complexes. Bioinorganic Chemistry and Applications, 2014.

Nguyen Van, T.D. and Sufian, S. and Mansor, N. and Yahya, N. (2014) Characterization of carbon nanofibers treated with thermal nitrogen as a catalyst support using point-of-zero charge analysis. Journal of Nanomaterials, 2014.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Naz, M.Y. (2014) Effect of ferrocene concentration on the quality of multiwalled CNTs grown by floating catalytic chemical vapor deposition technique. Main Group Chemistry, 13 (3). pp. 251-259.

Akbarzadeh, O. and Mohd Zabidi, N.A. and Abdullah, B. and Subbarao, D. (2014) Synthesis and characterization of Co/CNTs catalysts prepared by strong electrostatic adsorption (SEA) method. Applied Mechanics and Materials, 625. pp. 328-332.

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Rehman, N.U. (2014) Development of simple designs of multitip probe diagnostic systems for RF plasma characterization. The Scientific World Journal, 2014.

Daud, H. and Gulcharan, N.F.I. and Azhar, M.A.M. and Samsudin, M.Z. and Nor, N.M. and Ibrahim, T. (2014) Monitoring heart rate and body temperature using wireless technology (Zigbee). Applied Mechanics and Materials, 490-49. pp. 1565-1574.

Kurian, V.J. and Voon, M.C. and Wahab, M.M.A. and Liew, M.S. (2014) System reliability assessment of existing jacket platforms in Malaysian waters. Research Journal of Applied Sciences, Engineering and Technology, 8 (23). pp. 2305-2314.

Hani, A.F.M. and Paputungan, I.V. and Hassan, M.F. (2014) Service level agreement renegotiation framework for trusted cloud-based system. Lecture Notes in Electrical Engineering, 276. pp. 55-61.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Shaari, K.Z.K. (2014) Characterization of modified tapioca starch solutions and their sprays for high temperature coating applications. The Scientific World Journal, 2014.

Ajab, H. and Yaqub, A. and Malik, S.A. and Junaid, M. and Yasmeen, S. and Abdullah, M.A. (2014) Characterization of toxic metals in tobacco, tobacco smoke, and cigarette ash from selected imported and local brands in Pakistan. The Scientific World Journal, 2014.

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. (2014) Trends of syngas as a fuel in internal combustion engines. Advances in Mechanical Engineering, 2014.

Lee, K. and Weis, M. and Chen, X. and Taguchi, D. and Manaka, T. and Iwamoto, M. (2014) Metal nanoparticles in organic field-effect transistor: Transition from charge trapping to conduction mechanism. Thin Solid Films, 554. pp. 189-193.

Al-Amin Endut, M.N. and Yaacob, R.A.I.R. and Abdur-Rahman, M.A. and Abdullah, W.S.W. and Bakar, Z.A. (2014) The perception of al-'Adl in critical thinking: A comparative study of Muslim engineering undergraduates in Malaysian universities. Pertanika Journal of Social Sciences and Humanities, 22 (March). pp. 65-75.

Ghazali, Z. and Halib, M. (2014) In the shadow of asset security: Corporate social responsibility Programme by the greater Nile petroleum operating company (GNPOC), Republic of Sudan. Pertanika Journal of Social Sciences and Humanities, 22 (March). pp. 111-125.

Khalidah, K.A. and Rohani, S. and Mashitah, S. (2014) Ethical values and commitment towards achieving excellence: A study on public boarding school students in Malaysia. Pertanika Journal of Social Sciences and Humanities, 22 (March). pp. 33-50.

Bennett, D.G. (2014) Scientific method and human dignity in the balance. Pertanika Journal of Social Sciences and Humanities, 22 (March). pp. 139-147.

Bhattacharyya, E. and Sabdin, M. and Shaari, Z.H. (2014) Stepping up in harmony: Achieving cluster school excellence (CSE) Status for Non-CSE Malaysian secondary schools. Pertanika Journal of Social Sciences and Humanities, 22 (March). pp. 51-63.

Bhattacharyya, E. (2014) Communicative competence in technical oral presentation: Perspective of ESL educators and professional engineer. Pertanika Journal of Social Sciences and Humanities, 22 (March). pp. 1-16.

Idrus, H. and Dahan, H.M. and Abdullah, N. (2014) Integrating soft skills in the teaching of hard sciences at a private university: A preliminary study. Pertanika Journal of Social Sciences and Humanities, 22 (March). pp. 17-32.

Sajid, M. and Ghosh, D. (2014) A fast and simple method of spectral enhancement. Geophysics, 79 (3). pp. 75-80.

Ali, A.M. and Padmanabhan, E. (2014) Quartz surface morphology of Tertiary rocks from North East Sarawak, Malaysia: Implications for paleo-depositional environment and reservoir rock quality predictions. Petroleum Exploration and Development, 41 (6). pp. 761-770.

Hasan, M.H. and Jaafar, J. and Hassan, M.F. (2014) Development of Web services fuzzy quality models using data clustering approach. Lecture Notes in Electrical Engineering, 285 LN. pp. 631-640.

Mohammadpour, E. and Awang, M. (2014) Investigation of carbon nanotube defects on its strength using nonlinear finite element modeling. Advanced Structured Materials, 54. pp. 383-390.

Ali, A. and Ashraf, A.M. and Shariff, A.B.M. and Ganguly, S. (2014) Study of simultaneous mass transfer and nucleation in cryogenic packed bed for the removal of CO2 from natural gas. Applied Mechanics and Materials, 625. pp. 229-232.

Ahmed, I. and Idris, A. and Khan, M.S. and Chowdhury, S. and Akhtar, J. (2014) Effect of acetone on physical properties of PES membrane. Applied Mechanics and Materials, 625. pp. 545-548.

Zaid, H.M. and Azahar, W.A.W. and Soleimani, H. and Latiff, N.R.A. and Shafie, A. and Lee, K.C. and Beh, H.G. (2014) Effect of Nickel: Zinc ratio in nickel-zinc-ferrite nanoparticles as surfactant on recovery efficiency in enhanced oil recovery. Journal of Nano Research, 29. pp. 115-120.

Sohail, A. and Dominic, D.D. (2014) A unified framework for business process intelligence. Lecture Notes in Electrical Engineering, 285 LN. pp. 437-444.

Kee, K.E. and Richter, S. and Babic, M. and Nesic, S. (2014) Flow patterns and water wetting in oil-water two phase flow - A flow loop study. NACE - International Corrosion Conference Series.

Lam, M.K. and Lee, K.T. (2014) Cultivation of Chlorella vulgaris in a pilot-scale sequential-baffled column photobioreactor for biomass and biodiesel production. Energy Conversion and Management, 88. pp. 399-410.

Zain, A.M. and Abu, A. (2014) In-vivo blood glucose control by phenolic compound from Vernonia amygdalina, Andrographis paniculata, and Pithecellobium jiringa in Streptozotoxin-induced diabetic rats. Advances in Environmental Biology, 8 (14). pp. 131-134.

Janier, J.B. and Jalil, M.A.B. and Razali, R.B. and Shafie, A.B. and Abdul Karim, S.A.B. (2014) Effects of varied amount of carbon dioxide and pressure on asphaltene stability. Advances in Environmental Biology, 8 (14). pp. 39-43.

Bayuaji, R. and Nuruddin, M.F. (2014) Influence of microwave incinerated rice husk ash on hydration of foamed concrete. Advances in Civil Engineering, 2014.

Ullah, S. and Ahmad, F. and Shariff, A.M. and Bustam, M.A. (2014) Synergistic effects of kaolin clay on intumescent fire retardant coating composition for fire protection of structural steel substrate. Polymer Degradation and Stability, 110. pp. 91-103.

Shahzad, B. and Aziz, R. and Said, A.M. (2014) Using wage rate analysis to determine software project scale. Research Journal of Applied Sciences, Engineering and Technology, 8 (2). pp. 221-225.

Chan, Y.H. and Yusup, S. and Quitain, A.T. and Uemura, Y. and Sasaki, M. (2014) Bio-oil production from oil palm biomass via subcritical and supercritical hydrothermal liquefaction. Journal of Supercritical Fluids, 95. pp. 407-412.

Elochukwu, O.H. and Saaid, I.M. and Pilus, R.M. (2014) Organic deposit remediation using environmentally benign solvents: A review. ARPN Journal of Engineering and Applied Sciences, 9 (10). pp. 1930-1935.

Salam, M.A. and Abdullah, B. and Sufian, S. (2014) Hydrogenated microstructure and its hydrogenation properties: A density functional theory study. Journal of Nanomaterials, 2014.

Ayub, T. and Shafiq, N. and Nuruddin, M.F. (2014) Effect of chopped basalt fibers on the mechanical properties and microstructure of high performance fiber reinforced concrete. Advances in Materials Science and Engineering, 2014.

Hani, A.F.M. and Baba, R. and Shamsuddin, N. and Nugroho, H. (2014) Determination of melanin types and relative concentrations: An observational study using a non-invasive inverse skin reflectance analysis. International Journal of Cosmetic Science, 36 (5). pp. 451-458.

Ng, W.P.Q. and Lam, H.L. and Yusup, S. (2014) Waste-to-wealth: Energy pack as an integrated biofuel. Chemical Engineering Transactions, 39 (Specia). pp. 925-930.

Chin, B.L.F. and Yusup, S. and Al Shoaibi, A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Gasification conversion and char reactivity of rubber seed shell and high density polyethylene mixtures using steam Co-Gasification process. Chemical Engineering Transactions, 39 (Specia). pp. 679-684.

Chin, B.L.F. and Yusup, S. and Al Shoaibi, A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Investigation of co-gasification of rubber seed shell and high density polyethylene mixtures. Chemical Engineering Transactions, 39 (Specia). pp. 505-510.

Khor, C.S. and Lee, T.F. and Nhlapo, D. and Lau, K.K. (2014) Optimal synthesis of ethylene production process. Chemical Engineering Transactions, 39 (Specia). pp. 1585-1590.

Suman, S. and Hussin, F.A. and Malik, A.S. and Walter, N. and Goh, K.L. and Hilmi, I. and Ho, S.H. (2014) Image enhancement using geometric mean filter and gamma correction for WCE images. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8836. pp. 276-283.

Al-Kayiem, H.H. and Hussein, A.K. and Jaleel, J.M. and Hussain, S.H. (2014) Numerical computation of 3-dimensional supersonic flow field over seamless missiles. Indian Journal of Science and Technology, 7 (10). pp. 1563-1572.

Khan, Z. and Yusup, S. and Ahmad, M.M. and Chin, B.L.F. (2014) Hydrogen production from palm kernel shell via integrated catalytic adsorption (ICA) steam gasification. Energy Conversion and Management, 87. pp. 1224-1230.

Hashim, F.M. and Ahmad, M.F.A. (2014) Numerical simulation of supersonic subsea compact wet gas separator for gas transmission pipeline. Applied Mechanics and Materials, 607. pp. 298-302.

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. and Ng, C.Y. (2014) Prediction of surge motion response of floating structure using kalman smoother adaptive filters based time-domain volterra model. Applied Mechanics and Materials, 660. pp. 799-803.

binti Mohd Zulkefli, N.A. and Baharudin, B. (2014) Interlinked personal story information and user interest in weblog by RSS, FOAF, and SIOC technology. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8733. pp. 104-113.

Hassan, S. and H, H. and Ghaffari, A. (2014) Development of thermal insulation from oil palm fiber for chimney of fire tube steam packaged boiler. Applied Mechanics and Materials, 666. pp. 31-35.

Irniza, R. and Emilia, Z.A. and Muhammad Saliluddin, S. and Nizam Isha, A.S. (2014) A psychometric properties of the Malay-version police stress questionnaire. Malaysian Journal of Medical Sciences, 21 (4). pp. 42-50.

Subramonian, S. and Said, M.R. and Rostam, O. and Hafiz, M.Z. and Luqman, H.H. and Shaaban, A. and Dimin, M.F. (2014) Top spray fluidized bed granulated paddy urea fertilizer. Applied Mechanics and Materials, 606. pp. 137-140.

Noor, N.D.M. and Hashim, A.M. (2014) Hydraulic stability of interlocking concrete unit-V (ICU-V). Applied Mechanics and Materials, 606. pp. 211-215.

Idris, A. and Rahmanian, N. (2014) γ-ray pre-irradiated grafting of polytetrafluoroethylene film membrane. Jurnal Teknologi (Sciences and Engineering), 69 (9). pp. 47-51.

Hashmet, M.R. and Onur, M. and Tan, I.M. (2014) Empirical Correlations for Viscosity of Polyacrylamide Solutions with the Effects of Temperature and Shear Rate. II. Journal of Dispersion Science and Technology, 35 (12). pp. 1685-1690.

Akbar, A.R. and Awang, M.B. and Sawitri, D. (2014) Energy balance assessment of magnetic materials as theoretical hint for formulation of interoperable magnetic-mechanical equation. Advanced Materials Research, 1024. pp. 376-380.

Lee, Y.T. and Chowdhury, S. and Bustam, M.A. and Mutalib, M.I.A. and Norani, M.M. (2014) Morphology controlled ionothermal synthesis and characterization of ceria nanomaterials. Advanced Materials Research, 1024. pp. 112-115.

Zaid, H.M. and Ahmad Latiff, N.R. and Yahya, N. (2014) The effect of zinc oxide and aluminum oxide nanoparticles on interfacial tension and viscosity of nanofluids for enhanced oil recovery. Advanced Materials Research, 1024. pp. 56-59.

Ponnusamy, V. and Low, T.J. and Amin, A.H.M. (2014) Biologically inspired mobile agent-based sensor network (BIMAS). International Journal of Mobile Communications, 12 (5). pp. 449-476.

Aljuboori, A.H.R. and Uemura, Y. and Osman, N.B. and Yusup, S. (2014) Production of a bioflocculant from Aspergillus niger using palm oil mill effluent as carbon source. Bioresource Technology, 171. pp. 66-70.

Mohammed, B.S. and Azmi, N.J. (2014) Strength reduction factors for structural rubbercrete. Frontiers of Structural and Civil Engineering, 8 (3). pp. 270-281.

Kurian, V.J. and Sebastian, A.A. and Al-Yacouby, A.M. and Liew, M.S. and Idichandy, V.G. (2014) Wave forces on linear arrays of rigid vertical circular cylinders in regular waves. Research Journal of Applied Sciences, Engineering and Technology, 7 (24). pp. 5249-5257.

Norizan, A. and Uemura, Y. and Afif, H.A. and Osman, N. and Omar, W.N. and Abdullah, B. and Tsutsui, T. (2014) Fast pyrolysis of oil palm kernel shell in a fluidized bed reactor: The effect of pyrolysis temperature on the yields of pyrolysis products. Applied Mechanics and Materials, 625. pp. 616-619.

Ahmed, R. and Sinnathambi, C.M. and Eldmerdash, U. (2014) Dynamic studies of refinery sludge gasification in updraft reactor. Applied Mechanics and Materials, 625. pp. 431-434.

Hamidi, R.M. and Man, Z. and Azizli, K.A. and Ismail, L. and Nuruddin, M.F. (2014) Mechanical activation of fly ash by high energy planetary ball mill and the effects on physical and morphology properties. Applied Mechanics and Materials, 625. pp. 38-41.

See, T.L. and Shariff, A.M. and Kok Keong, L. (2014) Optimization of temperature rise during CO2 absorption process using response surface methodology. Applied Mechanics and Materials, 625. pp. 42-45.

Dang, K.V. and Yusup, S. and Uemura, Y. (2014) Studies on pyrolysis of rice husk using Taguchi's l9 Orthogonal Array. Applied Mechanics and Materials, 625. pp. 630-634.

Abdul Mannan, H. and Mukhtar, H. and Murugesan, T. (2014) Polyethersulfone (PES) membranes for CO2/CH4 separation: Effect of polymer blending. Applied Mechanics and Materials, 625. pp. 172-175.

Azizan, M.T. and Hellgardt, K. and Chadwick, D. (2014) Ethanol steam reforming over calcium doped Ni/Al2O3 catalyst. Applied Mechanics and Materials, 625. pp. 271-274.

Abdul Rahim, R.H. and Azizli, K.A. and Man, Z. and Rahmiati, T. and Ismail, L. (2014) Effect of solid to liquid ratio on the mechanical and physical properties of fly ash geopolymer without sodium silicate. Applied Mechanics and Materials, 625. pp. 46-49.

Nashed, O. and Sabil, K.M. and Lal, B. and Ismail, L. and Jaafar, A.J. (2014) Study of 1-(2-hydroxyethyle) 3-methylimidazolium halide as thermodynamic inhibitors. Applied Mechanics and Materials, 625. pp. 337-340.

Irfan Khan, M. and Azizli, K. and Sufian, S. and Man, Z. (2014) Effect of Na/Al and Si/Al ratios on adhesion strength of geopolymers as coating material. Applied Mechanics and Materials, 625. pp. 85-89.

Irii, T. and Murata, S. and Tanoue, K. and Nishimur, T. and Uemura, Y. and Taniguchi, M. and Sasauchi, K. (2014) Experimental study on heat and mass transfer during fast pyrolysis of biomass particle. Applied Mechanics and Materials, 625. pp. 620-625.

Rahman, A.H.A. and Abdullah, B. and Vo, D.-V.N. (2014) Modelling of carbon dioxide leakage in abandon wells using computational fluid dynamics. Applied Mechanics and Materials, 625. pp. 780-783.

Samsudin, S.J. and Mansor, N. and Sufian, S. and Man, Z. (2014) Identifying thermal and pH stability of thiols compound in garlic extract. Applied Mechanics and Materials, 625. pp. 57-60.

Sow Mei, I.L. and Ismail, I.B. and Abdullah, B.B. and Shafquet, A. (2014) Evaluation of electrical capacitance tomography thresholding techniques for void fraction measurement of gas-liquid system. Applied Mechanics and Materials, 625. pp. 439-443.

Zulfiqar, M. and Omar, A.A. and Chowdhury, S. (2014) Removal of phosphate and fluoride from industrial wastewater � A short review. Applied Mechanics and Materials, 625. pp. 805-808.

Chowdhury, S. and Inayat, A. and Abdullah, B. and Omar, A.A. and Ganguly, S. (2014) Hydrogen and syngas generation from gasification of coal in an integrated fuel processor. Applied Mechanics and Materials, 625. pp. 644-647.

Wahab, I.B.M.A. and Fong Yeong, Y. (2014) Effect of ultrasonic pre-treatment durations on the formation of zeolite-T. Applied Mechanics and Materials, 625. pp. 911-915.

Azeem, B. and Kushaari, K. and Man, Z. and Subbarao, D. (2014) Recent advancements on superabsorbent polymers to produce controlled release urea (short review). Applied Mechanics and Materials, 625. pp. 761-765.

Riaz, N. and Bustam, M.A. and Kait, C.F. and Man, Z.B. and Khan, M.S. and Shariff, A.M. and Shimekit, B. and Ullah, S. and Elkhalifah, A.E.I. (2014) Adsorption of AZO dye orange II by supported TiO2: A review. Applied Mechanics and Materials, 625. pp. 770-774.

Faizal, A.M. and Kutty, S.R.M. (2014) Modelling of Adams-Bohart and Yoon-Nelson on the removal of oil from water using microwave incinerated rice husk ash (MIRHA). Applied Mechanics and Materials, 625. pp. 788-791.

Pham, H.H.P.L. and Rusli, R. and Abdullah, M.Z. (2014) Consequence study of pressurized CO2 release containing impurities with obstacles. Applied Mechanics and Materials, 625. pp. 474-477.

Farnam, M. and Mukhtar, H. and Shariff, A.M. (2014) A review on glassy polymeric membranes for gas separation. Applied Mechanics and Materials, 625. pp. 701-703.

Rahmah, A.U. and Harimurti, S. and Omar, A.A. and Murugesan, T. (2014) Degradation kinetic of oxytetracycline antibiotic inside uv reactor in the presence of H2O2. Applied Mechanics and Materials, 625. pp. 901-906.

Daneshfozoun, S. and Abdullah, B. and Abdullah, M.A. (2014) Heavy metal removal by oil palm empty fruit bunches (OPEFB) biosorbent. Applied Mechanics and Materials, 625. pp. 889-892.

Osman, N.B. and Uemura, Y. and Afif, H. and Aljuboori, A.H.R. (2014) Pyrolyzed waste engine oil properties by microwave-induced reactor. Applied Mechanics and Materials, 625. pp. 673-676.

Ali, H.E.A. and Shanab, S.M.M. and Abo-State, M.A.M. and Shalaby, E.A.A. and El Demerdash, U.M.N. and Abdullah, M.A. (2014) Determination of antioxidant activities and total phenolic contents of three cyanobacterial species. Applied Mechanics and Materials, 625. pp. 826-829.

Murshid, G. and Shariff, A.M. and Bustam, M.A. and Ullah, S. (2014) Solubility of Co2 in piperazine (PZ) activated aqueous solutions of 2- amino-2-methyl-1-propanol (AMP) at elevated pressures. Applied Mechanics and Materials, 625. pp. 233-236.

Ab Kadir, N.A. and Rusli, R. and Zaina Abidin, N.A. (2014) CFD study on syngas dispersion for biomass process industry. Applied Mechanics and Materials, 625. pp. 410-413.

Ramli, R.M. and Kait, C.F. and Omar, A.A. (2014) Photodegradation of aqueous diisopropanolamine using Cu/TiO2: Effect of calcination temperature and duration. Applied Mechanics and Materials, 625. pp. 847-850.

Ban, Z.H. and Kok Keong, L. and Shariff, A.M. (2014) Supersaturated gas bubble formation across an orifice. Applied Mechanics and Materials, 625. pp. 562-565.

Romeli, F.J. and Wilfred, C.D. and Suhaila Shuib, A. (2014) Thermodynamic properties of flufenamic ionic liquids. Applied Mechanics and Materials, 625. pp. 586-591.

Man, Z. and Sarwono, A. and Bustam, M.A. and Azizli, K.A.M. (2014) Starch based soil conditioner and slow release system. Applied Mechanics and Materials, 625. pp. 877-880.

Idris, A. and Man, Z.B. and Maulud, A.S. and Gilassi, S. (2014) Phase behavior and ternary diagram construction for membrane forming polycarbonate solutions. Applied Mechanics and Materials, 625. pp. 7-10.

Asif, A. and Man, Z. and Azizli, K.A.M. and Nuruddin, M.F. and Ismail, L. (2014) Effect of NAOH concentration on the strength of non sodium silicate fly ash geopolymer. Applied Mechanics and Materials, 625. pp. 102-105.

Ellateif, T.M.A. and Mitra, S. and Murugesan, T. and Azizi, K. (2014) Preparation and characterization of hydrophobic silica zirconium nanoparticles. Applied Mechanics and Materials, 625. pp. 503-508.

Tasfy, S.F.H. and Mohd Zabidi, N.A. and Shaharun, M.S. and Subbarao, D. (2014) Effect of Mn and Pb promoters on the performance of Cu/ZnO-catalyst in Co2 hydrogenation to methanol. Applied Mechanics and Materials, 625. pp. 289-292.

Daffalla, S.B. and Mukhtar, H. and Shaharun, M.S. (2014) Preparation and characterization of rice husk ash for adsorption of phenol from aqueous solutions. Applied Mechanics and Materials, 625. pp. 498-502.

Izhar, S.M.M. and Ku Shaari, K.Z. and Man, Z. and Samsudin, Y.N. (2014) Influence of citric acid and curing time on water uptake. Applied Mechanics and Materials, 625. pp. 123-126.

Mushtaq, A. and Mukhtar, H. and Shariff, A.M. (2014) Gas permeability study of amine-polymer blend membranes to separate carbondioxide from natural gas. Applied Mechanics and Materials, 625. pp. 704-708.

Ku Shaari, K.Z. and Hassan, L.H. and Man, Z. (2014) Optimization of coating thickness in a tangential fluidized bed. Applied Mechanics and Materials, 625. pp. 131-135.

Zainal Abidin, M.U.S. and Mukhtar, H. and Shaharun, M.S. (2014) Removal of amines from wastewater using membrane separation processes. Applied Mechanics and Materials, 625. pp. 639-643.

Babiker, O.E. and Shuhaimi, M. and Mutalib, M.I.A. (2014) Molecular simulation for piperazinium based ILS: Effects of alkyl chain, concentration and anions on Henry�s constants. Applied Mechanics and Materials, 625. pp. 448-453.

Khanam, T. and Rashedi, A. and Chowdhury, S. and Asundi, A.K. (2014) Comparison of image processing methods for the detection of particle from digital hologram. Applied Mechanics and Materials, 625. pp. 444-447.

Tran, N. and Uemura, Y. and Chowdhury, S. and Ramli, A. (2014) A review of bio-oil upgrading by catalytic hydrodeoxygenation. Applied Mechanics and Materials, 625. pp. 255-258.

Abdullah, M.Z. and Yusup, S. and Mohd Bukhari, N.A. (2014) Synthesis and dehumidification performance of calcium chloride derived from the waste shells of Anadara granosa. Applied Mechanics and Materials, 625. pp. 924-927.

Elkhalifah, A.E.I. and Bustam, M.A. and Shariff, A.M. and Ullah, S. and Shimekit, B. and Riaz, N. (2014) Effects of intercalated mono-, di- and triethanolammonium cations on the structural and surface characteristics of sodium form of bentonite. Applied Mechanics and Materials, 625. pp. 98-101.

Mellon, N. and Shariff, A.M. (2014) Effect of superficial gas velocity on the separation efficiency of inline horizontal swirl tube separator. Applied Mechanics and Materials, 625. pp. 566-569.

Loong, Y.C. and Yusup, S. and Uemura, Y. (2014) Delignification of empty fruit bunch (EFB) using low transition temperature mixtures (LTTMs): A review. Applied Mechanics and Materials, 625. pp. 741-744.

Borhan, A. and Hoong, P.K. and Taha, M.F. (2014) Biosorption of heavy metal ions, oil and grease from industrial waste water by banana peel. Applied Mechanics and Materials, 625. pp. 749-752.

Zabiri, H. and Ariff, M. and Tufa, L.D. and Ramasamy, M. (2014) A comparison study between integrated OBFARX-NN and OBF-NN for modeling of nonlinear systems in extended regions of operation. Applied Mechanics and Materials, 625. pp. 382-385.

Tufa, L.D. and Ramasamy, M. (2014) Robust and effective PID controller identification for delay dominant systems. Applied Mechanics and Materials, 625. pp. 478-481.

Chowdhury, S. and Leng, T.W. and Ahmed, I. and Bustam, A. and Shariff, A.M. (2014) Fine structural analysis of solvent activated Cu-BTC for carbon dioxide capture. Applied Mechanics and Materials, 625. pp. 209-212.

Lethesh, K.C. and Binti Hasnan, N.H. and Mutalib, M.I.A. (2014) Extractive desulphurization of model oil using sulphonium based ionic liquids. Applied Mechanics and Materials, 625. pp. 205-208.

Majid, N.D.A. and Shariff, A.M. and Thiam, E.S.B. (2014) Compliance audit model for managing process safety in process industries. Applied Mechanics and Materials, 625. pp. 406-409.

Lai Fui, B.C. and Yusup, S. and Shoaibi, A.A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Kinetic analysis on catalytic co-gasification of rubber seed shell and high density polyethylene mixtures. Applied Mechanics and Materials, 625. pp. 251-254.

Ullah, Z. and Bustam, M.A. and Man, Z. (2014) Preparation of biodiesel from waste cooking oil catalyzed by basicionic liquid. Applied Mechanics and Materials, 625. pp. 874-876.

Inayat, A. and Ahmad, M.M. and Mutalib, M.I.A. and Yusup, S. and Khan, Z. (2014) Mathematical modelling for hydrogen production from steam gasification of cellulose. Applied Mechanics and Materials, 625. pp. 176-179.

Guan, B.H. and Zahari, M.H. and Chuan, L.K. (2014) Structural and magnetic properties of Ni0.5Zn0.5Fe2O4 synthesized through the sol-gel method. Applied Mechanics and Materials, 664. pp. 75-79.

Ibrahim, N.N.M. and Hussain, P. and Awang, M. (2014) Effect of nitriding on reaction layer of diffusion bonded sialon to AISI 420 martensitic stainless steel. Applied Mechanics and Materials, 660. pp. 178-184.

Afolabi, L.O. and Al-Kayiem, H.H. and Aklilu, T.B. (2014) Performance analysis of integrated collector system with immersed coil heat exchanger. Applied Mechanics and Materials, 660. pp. 740-744.

Manikya Kanti, K. and Srinivasa Rao, P. and Ranga Janardhana, G. and Rani, A.M.A. (2014) Mathematical modeling for the prediction of depth of penetration in double pulse GMA welding using fractional factorial method. Applied Mechanics and Materials, 660. pp. 347-351.

van Thien Duc, N. and Sufian, S. and Mansor, N. and Yahya, N. (2014) Investigation of carbon nanofiber supported iron catalyst preparation by deposition precipitation. Advanced Materials Research, 1043. pp. 71-75.

Said, A.M. (2014) Vector-projection approach to curve framing for extruded surfaces. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7971. pp. 596-607.

Akbarzadeh, O. and Zabidi, N.A.M. and Abdullah, B. and Subbarao, D. (2014) Synthesis of Co/CNTs via strong electrostatic adsorption: Effect of metal loading. Advanced Materials Research, 1043. pp. 101-104.

Gardezi, S.S.S. and Shafiq, N. and Zawawi, N.A.W.A. and Farhan, S.A. (2014) Embodied carbon potential of conventional construction materials used in typical malaysian single storey low cost house using building information modeling (BIM). Advanced Materials Research, 1043. pp. 242-246.

Rahman, S.A. and Syed, Z.I. and John, K.V. and Liew, M.S. (2014) Structural response of offshore blast walls under accidental explosion. Advanced Materials Research, 1043. pp. 278-282.

Ahmad, M.F.A. and Mohd Hashim, F.M. (2014) The correlation between variations of pressure against temperature distribution in supersonic subsea compact Wet-Gas Separators. Advanced Materials Research, 1043. pp. 258-262.

Sapari, N. and Orji, K.U. and Mohamad Hazli, M.H.B. and Yavari, S. and Olisa, E. and Asadpuor, R. (2014) Engineered wetland for the treatment of wastewater from fertilizer plant. Advanced Materials Research, 1051. pp. 500-504.

Rahman, I. and Vasant, P.M. and Singh, B.S.M. and Abdullah-Al-Wadud, M. (2014) Optimisation of PHEV/EV charging infrastructures: A review. International Journal of Energy Technology and Policy, 10 (3-4). pp. 280-296.

Peyvandi, S. and Ahmad, R. and Nordin Zakaria, M. (2014) Scoring model for availability of volatile hosts in volunteer computing environment. Journal of Theoretical and Applied Information Technology, 70 (2). pp. 293-301.

Saini, S. and Rambli, D.R.B.A. and Zakaria, M.N.B. and Sulaiman, S.B. (2014) A review on particle swarm optimization algorithm and its variants to human motion tracking. Mathematical Problems in Engineering, 2014.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Megat Yusoff, P.S.M. and Raza, M.R. (2014) Homogeneous distribution of carbon nanotubes in copper matrix nanocomposites fabricated via combined technique. Nanoscience and Nanotechnology Letters, 6 (10). pp. 865-874.

Karim, S.A.A. (2014) Monotonic interpolating curves by using rational cubic ball interpolation. Applied Mathematical Sciences, 8 (145-14). pp. 7259-7276.

Butt, S.M. and Onn, A. and Butt, M.M. and Tabassam, N. (2014) Towards a model-based framework for integrating usability evaluation techniques in agile software model. Advances in Intelligent Systems and Computing, 287. pp. 561-570.

Saleem, H.M. and Hassan, M.F. and Buhari, S.M. (2014) Router redundancy with enhanced vrrp for intelligent message routing. Advances in Intelligent Systems and Computing, 287. pp. 581-590.

Tunio, S.Q. and Bhattacharya, S.K. and Memon, K.R. and Irawan, S. and Kyaw, A. and Abdullah, M.F. (2014) Investigating methane adsorption potential of Malaysian coal for coal bed methane (CBM) study. Mediterranean Journal of Social Sciences, 5 (27). pp. 178-183.

Abdulkadir, S.J. and Yong, S.-P. and Marimuthu, M. and Lai, F.-W. (2014) Hybridization of ensemble kalman filter and non-linear auto-regressive neural network for financial forecasting. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8891. pp. 72-81.

Kermanioryani, M. and Ismail, L.B. and Abdul Mutalib, M.I. and Bagherzadeh, G. (2014) Removal of methylene blue from aqueous solution by ionic liquid. Applied Mechanics and Materials, 625. pp. 241-244.

Hui Ying, N. and Yin Fong, Y. (2014) Heavy metal ions removal using amine-functionalized mesoporous adsorbents. Applied Mechanics and Materials, 625. pp. 65-68.

Rashid, T. and Kait, C.F. and Murugesan, T. (2014) Conversion of lignocellulose into fermentable sugars using solid acid catalysis � A review. Applied Mechanics and Materials, 625. pp. 341-344.

Hosseinipour, A. and Sabil, K.M. and Arya Ekaputra, A. and Japper, A.B. and Ismail, L. (2014) The impact of the composition of the crude oils on the wax crystallization. Applied Mechanics and Materials, 625. pp. 196-200.

Moniruzzaman, M. and Nao, Y. and Bhattacharjee, S. and Ono, T. (2014) Laccase incorporated into PEG-PLA polymer as active and stable biocatalyst for ionic liquids media. Applied Mechanics and Materials, 625. pp. 333-336.

Mohamed, N.F. and Mutalib, M.I.A. and B.Bustam, M.A. and Leveque, J.-M. and El Harbawi, M. (2014) Ecotoxicity of pyridinium based ionic liquids: A review. Applied Mechanics and Materials, 625. pp. 152-155.

Rahim, M. and Ramasamy, M. and Tufa, L.D. and Faisal, A. (2014) Isolation of interacting channels in decentralized control systems using instrumental variables method. Applied Mechanics and Materials, 625. pp. 435-438.

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. (2014) Application of experimental statistical method in optimizing preparation variables for Cu-Ni/TiO2 photocatalyst. Applied Mechanics and Materials, 625. pp. 856-859.

Trinh, T.H. and Dao, Q.N. and Kushaari, K. and Ismail, L. and Shuib, A. (2014) Study the release of urea from Agrium® coated urea using UV-Vis spectrometer. Applied Mechanics and Materials, 625. pp. 745-748.

Hamzah, N.H.A. and Chowdhury, S. and Sufian, S. and Omar, A.A. and Inayat, A. (2014) Development of morphology dependent titania nanomaterial for photo degradation of dyes. Applied Mechanics and Materials, 625. pp. 349-352.

Azhar, M.A.I.M. and Chowdhury, S. and Mandal, P.C. and Daman, M.F. and Bhattacharjee, S. and Khanam, T. (2014) Ionic liquid-assisted synthesis and characterization of cerium oxide nanocubes for degradation of methylene blue. Applied Mechanics and Materials, 625. pp. 164-167.

Ali, H.E.A. and Shanab, S.M.M. and Abo-State, M.A.M. and Shalaby, E.A.A. and El Demerdash, U.M.N. and Abdullah, M.A. (2014) Screening of microalgae for antioxidant activities, carotenoids and phenolic contents. Applied Mechanics and Materials, 625. pp. 156-159.

Firas, A.A.K. and Shariff, A.M. and Keong, L.K. and Mellon, N. (2014) Novel approach and setup for multi component mixtures separation and analysis at offshore conditions. Applied Mechanics and Materials, 625. pp. 600-603.

Aziz, H.A. and Mohd Shariff, A. and Muhamad, M. (2014) Development of process safety management system (PSMS): Mechanical integrity (MI). Applied Mechanics and Materials, 625. pp. 486-489.

Ibrahim, M.T. and Yusoff, N. (2014) Optimization of condensate fractionation unit using response surface methodology. Applied Mechanics and Materials, 625. pp. 462-465.

Syuhaidah, R. and Norani, M.M. and Sufian, S. (2014) The effect of surface area, pore volume, and pore size distribution on the modified multiwalled carbon nanotubes. Applied Mechanics and Materials, 625. pp. 148-151.

Yasir, M. and Chowdhury, S. and Mansor, N. and Mohammad, N.M. and Uemura, Y. (2014) Upgrading of pyrolysis bio-oil to fuel over supported nanomaterials �A review. Applied Mechanics and Materials, 625. pp. 357-360.

Muhammad, A. and Pendyala, R. and Rahmanian, N. (2014) CFD simulation of droplet formation under various parameters in prilling process. Applied Mechanics and Materials, 625. pp. 394-397.

Krishnan, V. and Uemura, Y. and Yusup, S. and Osman, N. (2014) Aspects of carbon dioxide mitigation by Nannochloropsis oculata cultured in a photobioreactor. Applied Mechanics and Materials, 625. pp. 775-779.

Siraj, K.M. and Yusoff, N. and Shuhaimi, M. and Ali, S.F. (2014) An integrated framework for refinery scheduling and operational optimization. Applied Mechanics and Materials, 625. pp. 390-393.

Naqvi, S.R. and Uemura, Y. and Osman, N.B. and Yusup, S. and Nuruddin, M.F. (2014) Physiochemical properties of pyrolysis oil derived from fast pyrolysis of wet and dried rice husk in a free fall reactor. Applied Mechanics and Materials, 625. pp. 604-607.

Subbarao, D. and Abd Elghafoor Hassan, R.H. and Ramasamy, M. (2014) Dynamics of wall heated packed bed reactors. Applied Mechanics and Materials, 625. pp. 402-405.

Ramli, N.K. and Majeed, Z. and Shuib, A.S. and Mansor, N. and Man, Z. (2014) The potential of thiosulfinates in garlic extract as urease Bioinhibitor. Applied Mechanics and Materials, 625. pp. 796-799.

Herng, C.Y. and Yusup, S. and Quitain, A.T. and Uemura, Y. (2014) Bio-oil production under sub- and supercritical hydrothermal liquefaction of oil palm empty fruit bunch and Kernel Shell. Applied Mechanics and Materials, 625. pp. 881-884.

Ahmad, J. and Yusup, S. and Bokhari, A. and Kamil, R.N.M. (2014) Biodiesel production from the high free fatty acid �hevea brasiliensis� and fuel properties characterization. Applied Mechanics and Materials, 625. pp. 897-900.

Subbarao, D. and Abd Elghafoor Hassan, R.H. and Ramasamy, M. (2014) Heat transfer with chemical reaction in wall heated packed bed reactor. Applied Mechanics and Materials, 625. pp. 722-725.

Salleh, M.Z.M. and Wilfred, C.D. and Abdul Mutalib, M.I. (2014) Desulfurization of fuel using ionic liquids: Computational selection of cation and anion. Applied Mechanics and Materials, 625. pp. 118-122.

Shahid, M.Z. and Maulud, A.S. and Bustam, M.A. (2014) Modelling of CO2 loading in DEA by using peak ratio of Raman spectroscopy. Applied Mechanics and Materials, 625. pp. 188-191.

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. (2014) Estimation of counterweight for shaking force balancing of a crank-rocker mechanism. Applied Mechanics and Materials, 663. pp. 135-140.

Ayandotun, W.B. and Aziz, A.R.A. and Heikal, M.R. (2014) The effect of high carbon dioxide content on the performance and emission characteristics of a Direct Injection (DI) compressed natural gas engine. Applied Mechanics and Materials, 663. pp. 64-70.

Zulkifli, S.A. and Mohd, S. and Saad, N. and Aziz, A.R.A. (2014) Impact of motor size &efficiency on acceleration, Fuel consumption &Emissions of split- axle through- the- road parallel hybrid electric vehicle. Applied Mechanics and Materials, 663. pp. 498-503.

Ismael, M.A. and Heikal, M.R. and Bahroom, M.B. (2014) Spray characteristics of diesel-CNG dual fuel jet using schlieren imaging technique. Applied Mechanics and Materials, 663. pp. 58-63.

Riahi, A. and Yusof, K.W. and Isa, M.H. and Mahinder Singh, B.S. and Sapari, N. (2014) Solar stills productivity with different arrangements of PV-DC heater and sand layer in still basin: A comparative investigation. Research Journal of Applied Sciences, Engineering and Technology, 8 (11). pp. 1363-1372.

Zardari, M.A. and Jung, L.T. and Zakaria, M.N.B. (2014) Data classification based on confidentiality in virtual cloud environment. Research Journal of Applied Sciences, Engineering and Technology, 8 (13). pp. 1498-1509.

Hamdi, Z. and Awang, M. (2014) Introducing new slug size method in water alternating CO2 for enhanced oil recovery. Research Journal of Applied Sciences, Engineering and Technology, 8 (10). pp. 1239-1243.

Ayub, T. and Shafiq, N. and Fadhil Nuruddin, M. (2014) Stress-strain response of high strength concrete and application of the existing models. Research Journal of Applied Sciences, Engineering and Technology, 8 (10). pp. 1174-1190.

Khan, M.T. and Zakariya, M.A. and Baharudin, Z. and Ibrahim, R. and Hong, S.S.B. and Adz, J.J. (2014) An Overview of defected ground structure with practical application of defected ground structure bandpass filter in energy harvester circuit. Research Journal of Applied Sciences, Engineering and Technology, 8 (7). pp. 837-843.

Mushtaq, A. and Mukhtar, H. and Shariff, A.M. (2014) Advanced development and characterization of DEA amine-polysulfone/polyvinylacetate blend membranes. Research Journal of Applied Sciences, Engineering and Technology, 8 (10). pp. 1201-1211.

Gilassi, S. and Man, Z. and Maulud, A.S. and Idris, A. (2014) Modeling of CO2 capture by amine solution (MDEA) in hollow fiber membranes. Applied Mechanics and Materials, 625. pp. 537-540.

Safdar, R. and Omar, A.A. and Ismail, L.B. and Lal, B. (2014) Solubility of CO2 in an aqueous ammonium based ionic liquid. Applied Mechanics and Materials, 625. pp. 549-552.

Yong, R. and Maulud, A.S. and Suleman, H. (2014) Economic optimization of Co2 capture process using MEA-MDEA mixtures. Applied Mechanics and Materials, 625. pp. 422-425.

Majeed, Z. and Ramli, N.K. and Mansor, N. and Man, Z. (2014) Starch biodegradation in a lignin modified slow release fertilizer: Effect of thickness. Applied Mechanics and Materials, 625. pp. 830-833.

Jamil, M.F. and Uemura, Y. and Osman, N. and Kusakabe, K. and Yusup, S. (2014) Review on extraction and characterization of castor seed oil. Applied Mechanics and Materials, 625. pp. 916-919.

Jamil, F. and Bawadi, B.A. and Ahmad, M.M. and Inayat, A. and Yusup, S. (2014) Catalytic cracking of synthetic bio-oil: Kinetic studies. Applied Mechanics and Materials, 625. pp. 259-262.

Shimekit, B. and Shariff, A. and Mukhtar, H. and Bustam, A. and Elkhalifah, A.E.I. and Ullah, S. and Riaz, N. (2014) Interfacial defects on mixed matrix membranes and mitigation techniques for gas separation: A review. Applied Mechanics and Materials, 625. pp. 653-656.

Hanaei, H. and Murugesan, T. (2014) Phase diagram of an aqueous salt-polymer system composed of poly ethylene glycol 4000 + Na3C6H5O7+ H2O. Applied Mechanics and Materials, 625. pp. 574-577.

Subbarao, D. and Mohd. Zabidi, N.A. and Chowdhury, S. and Bustam-Khalil, M.A. and Mutalib, M.I.A. (2014) An equation of state for the liquid phase. Applied Mechanics and Materials, 625. pp. 582-585.

Bin Ramli, M.S. and Basit, A. and Ku Shaari, K.Z. and Keong, L.K. (2014) Study of the effect of surface roughness on droplet spreading behavior using CFD modeling. Applied Mechanics and Materials, 625. pp. 378-381.

Abdullah, M.Z. and Sufian, S. and Abdul Hamid, F.H. (2014) Ph dependence on biosorption of PB (II) by p. Amaryllifolius roxb. Applied Mechanics and Materials, 625. pp. 757-760.

Nasir, Q. and Sabil, K.M. and Partoon, B. (2014) CO2 rich gas mixture hydrate-liquid water- vapor (H-Lw-V) equilibrium measurement and prediction. Applied Mechanics and Materials, 625. pp. 386-389.

Shetty, N. and Ramasamy, M. and Pendyala, R. (2014) Effect of bulk temperature on formation of crude oil fouling precursors on heat transfer surfaces. Applied Mechanics and Materials, 625. pp. 482-485.

Bokhari, A. and Yusup, S. and Ahmad, J. and Kamil, R.N.M. (2014) Parametric study and improvement in fuel properties of pre-blended methyl esters from crude palm and rubber seed oil. Applied Mechanics and Materials, 625. pp. 494-497.

Lal, B. (2014) Hydration behavior study of imidazolium based ILs in water. Applied Mechanics and Materials, 625. pp. 553-556.

Pauzi, A.H. and Ismail, L. and Siyal, A.A. and Man, Z. and Azizli, K.A. (2014) Experimental study of geopolymer solidification kinetics. Applied Mechanics and Materials, 625. pp. 127-130.

Al Kaisy, G.M.J. and Mutalib, M.I.A. and Bustam, M.A. and Razali, R.B. (2014) Optimization of naphthalene extraction from its mixture with base oil and dibenzothiophene by BMIMDMP ionic liquid using response surface methodology (RSM). Applied Mechanics and Materials, 625. pp. 50-56.

Bawadi, A. and Vo, D.-V.N. (2014) An evaluation of fish scales as potential adsorbents: pH and concentration effect. Applied Mechanics and Materials, 625. pp. 73-76.

Partoon, B. and Sabil, K.M. and Kok Keong, L. (2014) Impact of gas phase composition on gas hydrate process for carbon dioxide capturing from gaseous mixtures. Applied Mechanics and Materials, 625. pp. 557-561.

Azizan, M.T. and Hellgardt, K. and Chadwick, D. (2014) Thermodynamic analysis of autothermal reforming of oxygenated hydrocarbons at thermoneutral condition for hydrogen production. Applied Mechanics and Materials, 625. pp. 730-733.

Khan, A.S. and Man, Z.B. and Bustam Khalil, M.A. and Kait, C.F. and Maulud, A.S. (2014) Effect of ball milling on the catalytic conversion of cellulose to levulinic acid. Applied Mechanics and Materials, 625. pp. 353-356.

Financie, R. and Moniruzzaman, M. and Uemura, Y. and Osman, N. (2014) Recent advances of using ionic liquid in lignocellulosic biomass degradation. Applied Mechanics and Materials, 625. pp. 834-837.

Afzaal, M. and Periyasamy, B. and Abdullah, M.A. (2014) Continuous heavy metal removal from palm oil mill effluent using natural ceiba pentandra packed-bed column. Applied Mechanics and Materials, 625. pp. 822-825.

Faisal, A. and Ramasamy, M. and Shuhaimi, M. and Rahim, M. (2014) Identification of multi-input multi-output systems using combined direct and indirect methods. Applied Mechanics and Materials, 625. pp. 414-417.

Ahmed, I. (2014) Preface. Applied Mechanics and Materials, 625.

Nguyen Van, T.D. and Sufian, S. and Mansor, N. and Yahya, N. (2014) Effect of modification techniques on surface of carbon nanofiber as catalyst support. Applied Mechanics and Materials, 625. pp. 345-348.

Prabaningrum, N. and Bin Ismail, L. and Subbarao, D. (2014) Reaction kinetics of in-situ methanolysis of Jatropha curcas seeds. Applied Mechanics and Materials, 625. pp. 306-310.

Ali, H.E.A. and Shanab, S.M.M. and Abo-State, M.A.M. and Shalaby, E.A.A. and El Demerdash, U.M.N. and Abdullah, M.A. (2014) Evaluation of antioxidants, pigments and secondary metabolites contents in Spirulina platensis. Applied Mechanics and Materials, 625. pp. 160-163.

Zaini, D. and Shariff, A.M. and Leong, C.T. (2014) Three-tier inherent safety quantification (3-TISQ) for toxic release at preliminary design stage. Applied Mechanics and Materials, 625. pp. 426-430.

Chakraborty, A. and Moniruzzaman, M. and Chowdhury, S. and Bhattacharjee, S. (2014) Kinetic studies on gold nanoparticle formation in aqueous medium. Applied Mechanics and Materials, 625. pp. 263-266.

Richard, B. and Bustam, M.A. and Gonfa, G. (2014) Separation of benzene and cyclohexane with mixed solvent using extractive distillation. Applied Mechanics and Materials, 625. pp. 578-581.

Abbas, T. and Abdul Mutalib, M.I. and Azmi Bustam, M. (2014) Developments in mercury removal from natural Gas-A short review. Applied Mechanics and Materials, 625. pp. 223-228.

Nadeem, S. and Ahmed, I. and Abdul Muttalib, I. and Tufail, M. and Khan, M.S. (2014) Citric acid future prospects for Pakistan, a short review. Applied Mechanics and Materials, 625. pp. 61-64.

Yaqub, S. and Mellon, N. and Shariff, A.M. (2014) A review on robustness of covalent organic polymers for Co2 capture. Applied Mechanics and Materials, 625. pp. 237-240.

Ullah, S. and Shariff, A.M. and Bustam, M.A. and Elkhalifah, A.E.I. and Murshid, G. and Riaz, N. and Shimekit, B. (2014) Effect of modified MIL-53 with multi-wall carbon nanotubes and nano fibers on CO2 adsorption. Applied Mechanics and Materials, 625. pp. 870-873.

Qasim, A. and Zamri Abdullah, M. and Lau, K.K. and Adilla, N. (2014) Flow dynamics investigation of CO2/CH4 gas mixture through porous media using computational approach. Applied Mechanics and Materials, 625. pp. 369-372.

Lok, C.C. and Yin Fong, Y. (2014) Synthesis and characterization of ZIF-8 mixed matrix membranes. Applied Mechanics and Materials, 625. pp. 661-664.

Firas, A.A.K. and Shariff, A.M. and Keong, L.K. and Mellon, N. (2014) Novel approach and setup for multi phase mixtures separation and analysis at offshore conditions. Applied Mechanics and Materials, 625. pp. 669-672.

Taha, M.F. and Shuib, A.S. and Shaharun, M.S. and Borhan, A. (2014) Adsorptive removal of ni2+ from aqueous solution onto rice husk-based activated carbon. Applied Mechanics and Materials, 625. pp. 893-896.

Khan, S. and Zain, A.M. and Murugesan, T. and Abdullah, M.A. (2014) Antioxidant activity and HPLC analysis of gallic acid phenolic compound from Nephelium lappaceum leaves. Applied Mechanics and Materials, 625. pp. 15-18.

Ahmed, S. and Ramli, A. and Yusup, S. (2014) Physicochemical properties of Diethanolamine-functionalized Si-MCM-41. Applied Mechanics and Materials, 625. pp. 11-14.

Thuy, N.T.P. and Pendyala, R. and Marneni, N. (2014) Heat exchanger network optimization using differential evolution with stream splitting. Applied Mechanics and Materials, 625. pp. 373-377.

Uemura, Y. and Norizan, A. and Afif, H.A. and Osman, N. and Omar, W.N. and Abdullah, B. and Tsutsui, T. (2014) Fast pyrolysis of oil palm kernel shell in a fluidized bed reactor: The effect of biomass size on the yields of pyrolysis products. Applied Mechanics and Materials, 625. pp. 608-611.

Mazlan, M.A.F. and Uemura, Y. and Osman, N. and Yusup, S. (2014) Review on pyrolysis of hardwood residue to Biofuel. Applied Mechanics and Materials, 625. pp. 714-717.

Aja, O.C. and Oseghale, S.D. and Al-Kayiem, H.H. (2014) Review and evaluation of municipal solid waste management practices in Malaysia. Journal of Solid Waste Technology and Management, 40 (3). pp. 216-232.

Chan, Y.H. and Dang, K.V. and Yusup, S. and Lim, M.T. and Zain, A.M. and Uemura, Y. (2014) Studies on catalytic pyrolysis of empty fruit bunch (EFB) using Taguchi's L9 Orthogonal Array. Journal of the Energy Institute, 87 (3). pp. 227-234.

Talebian, S.H. and Masoudi, R. and Tan, I.M. and Zitha, P.L.J. (2014) Foam assisted CO2-EOR: A review of concept, challenges, and future prospects. Journal of Petroleum Science and Engineering, 120. pp. 202-215.

C. Fatah, M. and Ismail, M.C. and Ari-Wahjoedi, B. (2014) Corrosion behaviour of X52 steel in the presence of sulphite. Anti-Corrosion Methods and Materials, 61 (5). pp. 343-352.

Paul, T. and Seal, M. and Banerjee, D. and Ganguly, S. and Kargupta, K. and Sandilya, P. (2014) Analysis of drying and dilution in phosphoric acid fuel cell (PAFC) using galvanometric study and electrochemical impedance spectroscopy. Journal of Fuel Cell Science and Technology, 11 (4).

Khor, C.S. and Chachuat, B. and Shah, N. (2014) Fixed-flowrate total water network synthesis under uncertainty with risk management. Journal of Cleaner Production, 77. pp. 79-93.

Al-Kayiem, H.H. and Lin, S.C. (2014) Performance evaluation of a solar water heater integrated with a PCM nanocomposite TES at various inclinations. Solar Energy, 109 (1). pp. 82-92.

Chin, B.L.F. and Yusup, S. and Al Shoaibi, A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Kinetic studies of co-pyrolysis of rubber seed shell with high density polyethylene. Energy Conversion and Management, 87. pp. 746-753.

Nasir, Q. and Lau, K.K. and Lal, B. and Sabil, K.M. (2014) Hydrate dissociation condition measurement of CO2-rich mixed gas in the presence of methanol/ethylene glycol and mixed methanol/ethylene glycol + electrolyte aqueous solution. Journal of Chemical and Engineering Data, 59 (11). pp. 3920-3926.

Sabil, K.M. and Nasir, Q. and Partoon, B. and Seman, A.A. (2014) Measurement of H-LW-V and dissociation enthalpy of carbon dioxide rich synthetic natural gas mixtures. Journal of Chemical and Engineering Data, 59 (11). pp. 3502-3509.

Park, D.K. and Paik, J.K. and Kim, B.J. and Seo, J.K. and Li, C.G. and Kim, D.K. (2014) Ultimate strength performance of Northern sea going non-ice class commercial ships. Structural Engineering and Mechanics, 52 (3). pp. 613-632.

Zhalehrajabi, E. and Rahmanian, N. and Zarrinpashne, S. and Balasubramanian, P. (2014) Investigation of the growth of particles produced in a laval nozzle. Particulate Science and Technology, 32 (6). pp. 595-601.

Sundaramoorthy, S. and Ramasamy, M. (2014) Tuning optimal proportional-integral-derivative controllers for desired closed-loop response using the method of moments. Industrial and Engineering Chemistry Research, 53 (44). pp. 17403-17418.

Yaqub, A. and Isa, M.H. and Kutty, S.R.M. and Ajab, H. (2014) Electrochemical degradation of PAHs in produced water using Ti/Sb2O5-SnO2-IrO2 anode. Electrochemistry, 82 (11). pp. 979-984.

Bin Mohd, M.H. and Kim, D.W. and Lee, B.J. and Kim, D.K. and Seo, J.K. and Paik, J.K. (2014) On the burst strength capacity of an aging subsea gas pipeline. Journal of Offshore Mechanics and Arctic Engineering, 136 (4).

Ezechi, E.H. and Isa, M.H. and Kutty, S.R.M. and Yaqub, A. (2014) Boron removal from produced water using electrocoagulation. Process Safety and Environmental Protection, 92 (6). pp. 509-514.

Khalid, S. and Wen, W.P. and Cheong, L.Y. (2014) Synthesis design of UWB bandpass filter using multiple resonance resonator (MRR). Electronics Letters, 50 (24). pp. 1851-1853.

Sarkar, A.Kr. and Saha, S. and Ganguly, S. and Banerjee, D. and Kargupta, K. (2014) Hydrogen storage on graphene using Benkeser reaction. International Journal of Energy Research, 38 (14). pp. 1889-1895.

Kazimi, M.R. and Shah, T. and Jamari, S.S.B. and Ahmed, I. and Faizal, C.K.M. (2014) Sulfonation of low-density polyethylene and its impact on polymer properties. Polymer Engineering and Science, 54 (11). pp. 2522-2530.

Gilani, S.I.H. and Aris, M.S. and Bhaskoro, P.T. (2014) Energy saving technique for cooling dominated academic building: Techno-economic analysis of its application. Applied Energy, 132. pp. 192-199.

Hassan, S. and Duclaux, L. and Lévêque, J.-M. and Reinert, L. and Farooq, A. and Yasin, T. (2014) Effect of cation type, alkyl chain length, adsorbate size on adsorption kinetics and isotherms of bromide ionic liquids from aqueous solutions onto microporous fabric and granulated activated carbons. Journal of Environmental Management, 144. pp. 108-117.

Kim, D.K. and Liew, M.S. and Youssef, S.A.M. and Mohd, M.H. and Kim, H.B. and Paik, J.K. (2014) Time-Dependent Ultimate Strength Performance of Corroded FPSOs. Arabian Journal for Science and Engineering, 39 (11). pp. 7673-7690.

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. (2014) Syngas (H2/CO) in a spark-ignition direct-injection engine. Part 1: Combustion, performance and emissions comparison with CNG. International Journal of Hydrogen Energy, 39 (31). pp. 17884-17895.

Ali, T. and Jung, L.T. and Faye, I. (2014) End-to-End Delay and Energy Efficient Routing Protocol for Underwater Wireless Sensor Networks. Wireless Personal Communications, 79 (1). pp. 339-361.

Nawaz, F. and Jeoti, V. (2014) SAW sensor read range limitations and perspectives. Wireless Networks, 20 (8). pp. 2581-2587.

Mohshim, D.F. and Mukhtar, H. and Man, Z. (2014) The effect of incorporating ionic liquid into polyethersulfone-SAPO34 based mixed matrix membrane on CO2 gas separation performance. Separation and Purification Technology, 135. pp. 252-258.

Mohd Shah, M.S.B. and Periyasamy, B. (2014) Binary cracking kinetics for thermal cracking of vacuum residues in Eureka process. Fuel, 134. pp. 618-627.

Mturi, G.A.J. and O'Connell, J. and Zoorob, S.E. and De Beer, M. (2014) A study of crumb rubber modified bitumen used in South Africa. Road Materials and Pavement Design, 15 (4). pp. 774-790.

Kalwar, S.A. and Elraies, K.A. (2014) A rheological study of polymer using precipitation inhibitor, alkali, and surfactant for high salinity in carbonate reservoirs. Petroleum Science and Technology, 32 (19). pp. 2329-2336.

Jamil, A. and Ching, O.P. and Shariff, A.B.M. (2014) Polymer-nanoclay mixed matrix membranes for CO2/CH4 separation: A review. Applied Mechanics and Materials, 625. pp. 690-695.

Abdul Ghani, M.R. and Ching Peiching, O.P. (2014) Optimization of ethanol production from mango peels using response surface methodology. Applied Mechanics and Materials, 625. pp. 766-769.

Adil, S.H. and Ali, S.S.A. and Raza, K. and Hussaan, A.M. (2014) An improved intrusion detection approach using synthetic minority over-sampling technique and deep belief network. Frontiers in Artificial Intelligence and Applications, 265. pp. 94-102.

Zahari, A.A. and Jaafar, J. (2014) Hybridization of hidden markov model and case based reasoning for time series forecasting. Frontiers in Artificial Intelligence and Applications, 265. pp. 63-74.

Rashidi, N.A. and Yusup, S. and Borhan, A. and Loong, L.H. (2014) Experimental and modelling studies of carbon dioxide adsorption by porous biomass derived activated carbon. Clean Technologies and Environmental Policy, 16 (7). pp. 1353-1361.

Hing, Y.K. and Chin, W.M. and Heikal, M.R. (2014) Numerical and experimental determination of wavy fintube shape factor. Journal of Mechanical Engineering and Sciences, 6. pp. 889-900.

Sulaiman, S.A. and Razali, N.H.M. and Konda, R.E. and Atnaw, S.M. and Moni, M.N.Z. (2014) On the diversification of feedstock in gasification of oil palm fronds. Journal of Mechanical Engineering and Sciences, 6. pp. 907-915.

Arpit and Shafie, A. and Wan Ahmad, W.F. (2014) Automata for modeling the distributed probabilistic reversible processes. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8321. pp. 122-136.

Hassim, M.H. and Foo, D.C.Y. and Shariff, A.M. (2014) Editorial. Process Safety and Environmental Protection, 92 (5). pp. 377-378.

Matsumura, Y. and Fukutomi, Y. and Uemura, Y. (2014) Comparative study of hydrothermal pretreatment of eucalyptus and oil palm empty fruit bunch for ethanol fermentation. Journal of the Japan Petroleum Institute, 57 (4). pp. 164-170.

Yahaya Khan, M. and Abdul Karim, Z.A. and Hagos, F.Y. and Aziz, A.R.A. and Tan, I.M. (2014) Current trends in water-in-diesel emulsion as a fuel. The Scientific World Journal, 2014.

Atnaw, S.M. and Sulaiman, S.A. and Yusup, S. (2014) Influence of fuel moisture content and reactor temperature on the calorific value of Syngas resulted from gasification of oil palm fronds. The Scientific World Journal, 2014.

Chatterjee, K. and Mitra, M. and Ganguly, S. and Kargupta, K. and Banerjee, D. (2014) Thermoelectric performance of electrodeposited nanostructured polyaniline doped with sulfo-salicylic acid. Journal of Applied Polymer Science, 131 (4).

Tariq Jan, M. and Hisham Bin Hamid, N. and Md Khir, M.H. and Ashraf, K. and Shoaib, M. (2014) Reliability and fatigue analysis in cantilever-based MEMS devices operating in harsh environments. Journal of Quality and Reliability Engineering, 2014.

Shaikh, M.S. and Shariff, A.M. and Bustam, M.A. and Murshid, G. (2014) Physicochemical properties of aqueous solutions of sodium l -prolinate as an absorbent for CO2 removal. Journal of Chemical and Engineering Data, 59 (2). pp. 362-368.

Khan, A.A. and Basri, S. and Fazal-e-Amin (2014) A survey based study on factors effecting communication in GSD. Research Journal of Applied Sciences, Engineering and Technology, 7 (7). pp. 1123-1131.

Choong, K.W. and Wen, L.P. and Tiong, L.L. and Anosike, F. and Shoushtari, M.A. and Saaid, I.B.M. (2014) A comparative study on sand transport modeling for horizontal multiphase pipeline. Research Journal of Applied Sciences, Engineering and Technology, 7 (6). pp. 1017-1024.

Dan-Mallam, Y. and Abdullah, M.Z. and Yusoff, P.S.M.M. (2014) Mechanical properties of recycled kenaf/polyethylene terephthalate (PET) fiber reinforced polyoxymethylene (POM) hybrid composite. Journal of Applied Polymer Science, 131 (3).

Atnaw, S.M. and Kueh, S.C. and Sulaiman, S.A. (2014) Study on tar generated from downdraft gasification of oil palm fronds. The Scientific World Journal, 2014.

Munir, S. and Heikal, M.R. and Rashid, A. and Aziz, A. and Muthuvalu, M.S. and Jaafar, A. and Israr, M. (2014) Dynamical analysis of turbulent liquid phase in two-phase pipe flow. ScienceAsia, 40. pp. 63-68.

Toloue, I. and Fateh, A. and Liew, M. (2014) Comparison of classical tsunami resistance systems in RC structure. Advances in Structural Engineering, 17 (2). pp. 157-164.

Konda, R.E. and Sulaiman, S.A. and Ariwahjoedi, B. (2014) Design and Development of Laboratory Scale Updraft Gasifier for Gasification of Oil Palm Fronds. Asian Journal of Scientific Research, 7 (3). pp. 341-353.

Foong, O.-M. and Yong, J.-M. and Sulaiman, S. and Rambli, D.R.A. (2014) Mobile health awareness in pre-detection of mild stroke symptoms. Journal of Computer Science, 10 (12). pp. 2383-2394.

Hussain, G. and Khan, F.U. and Khan, I.U. and Muhammad, N. and Jan, S. and Aziz, T. and Tariq, M. and Hussain, A. and Asimullah, A. and Bilal, H. and Shahidullah, S. and Abdullah, A. and Khan, S.U. and Ud Din, S. (2014) Chemical parameters and microbial analysis of potable water of various tehsils in North Waziristan agency. World Applied Sciences Journal, 32 (6). pp. 1053-1056.

Nugraheni, R.D. and Chow, W.S. and Abdul Hadi, A.R. and Siti Nuralia, M.N. and Abdullah, M.F. (2014) Tertiary coal-bearing heterolithic packages as low permeability reservoir rocks in the Balingian Sub-basin, Sarawak, Malaysia. Bulletin of the Geological Society of Malaysia, 60. pp. 85-93.

Fathiyah Jamaludin, S.N. and Pubellier, M. and Menier, D. (2014) Relationship between syn-depositional faulting and carbonate growth in Central Luconia Province, Malaysia. Bulletin of the Geological Society of Malaysia, 60. pp. 77-83.

Iqbal, M.J. and Faye, I. and Md Said, A. and Samir, B.B. (2014) Data mining of protein sequences with amino acid position-based feature encoding technique. Lecture Notes in Electrical Engineering, 285 LN. pp. 119-126.

Shuaibu, A.N. and Faye, I. and Malik, A.S. and Simsim, M.T. (2014) Collision avoidance path for pedestrian agent performing tawaf. Lecture Notes in Electrical Engineering, 285 LN. pp. 361-368.

Saha, S. and Basak, V. and Dasgupta, A. and Ganguly, S. and Banerjee, D. and Kargupta, K. (2014) Graphene supported bimetallic G-Co-Pt nanohybrid catalyst for enhanced and cost effective hydrogen generation. International Journal of Hydrogen Energy, 39 (22). pp. 11566-11577.

Dubois, A. and Menier, D. and Sedrati, M. (2014) Morphologie and hydrodynamic impact of a period of high energy in the intertidal section of an embayed beach and in three mesotidal semi-sheltered pocket beaches: Example of the Xynthia storm in the Rhuys peninsula (France). Landbauforschung (3). pp. 227-242.

Khor, C.S. and Chachuat, B. and Shah, N. (2014) Optimization of water network synthesis for single-site and continuous processes: Milestones, challenges, and future directions. Industrial and Engineering Chemistry Research, 53 (25). pp. 10257-10275.

Zubair, M. and Tang, T.B. (2014) A high resolution capacitive sensing system for the measurement of water content in crude oil. Sensors (Switzerland), 14 (7). pp. 11351-11361.

Lethesh, K.C. and Shah, S.N. and Mutalib, M.I.A. (2014) Synthesis, characterization, and thermophysical properties of 1,8-diazobicyclo5.4.0undec-7-ene based thiocyanate ionic liquids. Journal of Chemical and Engineering Data, 59 (6). pp. 1788-1795.

Lee, K. and Akmal Saipolbahri, Z. and Hoe Guan, B. and Soleimani, H. (2014) Organic sol-gel method in the synthesis and characterization of zinc oxide nanoparticles. American Journal of Applied Sciences, 11 (6). pp. 959-962.

Mustafa, M.R. and Rezaur, R.B. and Rahardjo, H. and Isa, M.H. (2014) Closure to "Evaluation of MLP-ANN training algorithms for modeling soil pore-water pressure responses to rainfall" by M. R. Mustafa, R. B. Rezaur, S. Saiedi, H. Rahardjo, and M. H. Isa. Journal of Hydrologic Engineering, 19 (6). pp. 1272-1273.

Steele, G.S. and Khalid Ali, K. (2014) Excellence in Malaysian universities: Senior academics in public and private institutions discuss this notion. Pertanika Journal of Social Sciences and Humanities, 22 (2). pp. 665-679.

Harun, H. and Salleh, R. and Memon, M.A. and Baharom, M.N.R. and Abdullah, A. (2014) Job satisfaction, organizational commitment and stress among offshore oil and gas platform employees. Asian Social Science, 10 (11). pp. 28-32.

Khalid, S. and Wen, W.P. and Cheong, L.Y. (2014) Optimum filter synthesis procedure for ultra-wideband bandpass filter using step-impedance resonator. Journal of Electromagnetic Waves and Applications, 28 (8). pp. 943-955.

Md. Saaid, I. and Mahat, S.Q.A. and Lal, B. and Mutalib, M.I.A. and Sabil, K.M. (2014) Experimental investigation on the effectiveness of 1-butyl-3- methylimidazolium perchlorate ionic liquid as a reducing agent for heavy oil upgrading. Industrial and Engineering Chemistry Research, 53 (19). pp. 8279-8284.

Azeem, B. and Kushaari, K. and Man, Z.B. and Basit, A. and Thanh, T.H. (2014) Review on materials & methods to produce controlled release coated urea fertilizer. Journal of Controlled Release, 181 (1). pp. 11-21.

Ziyada, A.K. and Wilfred, C.D. (2014) Effect of temperature and anion on densities, viscosities, and refractive indices of 1-Octyl-3-propanenitrile Imidazolium-based ionic liquids. Journal of Chemical and Engineering Data, 59 (5). pp. 1385-1390.

Mohamed Ramli, N. and Hussain, M.A. and Mohamed Jan, B. and Abdullah, B. (2014) Composition Prediction of a Debutanizer Column using Equation Based Artificial Neural Network Model. Neurocomputing, 131. pp. 59-76.

Chin, B.L.F. and Yusup, S. and Al Shoaibi, A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Comparative studies on catalytic and non-catalytic co-gasification of rubber seed shell and high density polyethylene mixtures. Journal of Cleaner Production, 70. pp. 303-314.

Irshad, M.I. and Ahmad, F. and Mohamed, N.M. and Abdullah, M.Z. (2014) Preparation and structural characterization of template assisted electrodeposited copper nanowires. International Journal of Electrochemical Science, 9 (5). pp. 2548-2555.

Narahari, M. and Debnath, L. (2014) Some new convolution properties and inversion formulas of Laplace transforms. Integral Transforms and Special Functions, 25 (5). pp. 412-422.

Mirza, A. and Hamid, N.H. and Khir, M.H.M. and Dennis, J.O. and Ashraf, K. and Shoaib, M. and Jan, M.T. (2014) A CMOS-MEMS cantilever sensor for capnometric applications. IEICE Electronics Express, 11 (9).

Khan, D. and Khan, H.U. and Khan, F. and Khan, S. and Badshah, S. and Khan, A.S. and Samad, A. and Ali, F. and Khan, I. and Muhammad, N. (2014) New cholinesterase inhibitory constituents from Lonicera quinquelocularis. PLoS ONE, 9 (4).

Ziyada, A.K. and Wilfred, C.D. (2014) Physical properties of ionic liquids consisting of 1-butyl-3- propanenitrile- and 1-decyl-3-propanenitrile imidazolium-based cations: Temperature dependence and influence of the anion. Journal of Chemical and Engineering Data, 59 (4). pp. 1232-1239.

Ahyudanari, E. and Shafiq, N. and Kamaruddin, I. (2014) Identification and modelling process of defining temperature gradient in airport pavement. Aviation, 18 (2). pp. 72-79.

Vasant, P. (2014) Hybrid line search and simulated annealing for production planning system in industrial engineering. International Journal of Manufacturing, Materials, and Mechanical Engineering, 4 (2). pp. 1-13.

Taiwo, A.A. and Downe, A.G. and Loke, S.-P. (2014) Behavioral intention towards e-government in malaysia: A structural equation modeling approach. International Journal of Electronic Government Research, 10 (2). pp. 8-21.

Nuruddin, M.F. and Chang, K.Y. and Azmee, N.M. (2014) Workability and compressive strength of ductile self compacting concrete (DSCC) with various cement replacement materials. Construction and Building Materials, 55. pp. 153-157.

Mohammed, B.S. and Abdullahi, M. and Hoong, C.K. (2014) Statistical models for concrete containing wood chipping as partial replacement to fine aggregate. Construction and Building Materials, 55. pp. 13-19.

Saheed, M.S.M. and Mohamed, N.M. and Burhanudin, Z.A. (2014) Breakdown voltage reduction by field emission in multi-walled carbon nanotubes based ionization gas sensor. Applied Physics Letters, 104 (12).

Guan, B.H. and Chuan, L.K. and Soleimani, H. (2014) Synthesis, characterization and influence of calcinations temperature on magnetic properties of Ni0.75Zn0.25Fe2O4 nanoparticles synthesized by sol-gel technique. American Journal of Applied Sciences, 11 (6). pp. 878-882.

Karim, A.N.M. and Ikram, M. and Emrul Kays, H.M. and Abdesselam, M. and Ginta, T.L. (2014) Assessment of machining cost for end-milling of Ti-6Al-4V titanium alloy through RSM-based parametric model. Advanced Materials Research, 903. pp. 83-89.

Mulubrhan, F. and Mokhtar, A.A. and Muhammad, M. (2014) Integrating reliability analysis in life cycle cost estimation of heat exchanger and pump. Advanced Materials Research, 903. pp. 408-413.

Kareem, M.W. and Habib, K. and Gilani, S.I. (2014) A review of solar air heater for drying of agricultural products. Advanced Materials Research, 903. pp. 239-244.

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Analysis of two-layered film journal bearing with partial slip surface. Advanced Materials Research, 903. pp. 215-220.

Khan, J.A. and Pao, W.K. (2014) Effect of different qualities of foam on fill particle transport in horizontal well cleanup operation using coiled tubing. Advanced Materials Research, 903. pp. 39-44.

Mushtaq, M. and Tan, I.M. and Nadeem, M. and Devi, C. and Lee, S.Y.C. and Sagir, M. (2014) A convenient route for the alkoxylation of biodiesel and its influence on cold flow properties. International Journal of Green Energy, 11 (3). pp. 267-279.

Isa, M.H. and Ezechi, E.H. and Ahmed, Z. and Magram, S.F. and Kutty, S.R.M. (2014) Boron removal by electrocoagulation and recovery. Water Research, 51. pp. 113-123.

Muhammad, N. and Man, Z. and Elsheikh, Y.A. and Bustam, M.A. and Mutalib, M.I.A. (2014) Synthesis and thermophysical properties of imidazolium-based bronsted acidic ionic liquids. Journal of Chemical and Engineering Data, 59 (3). pp. 579-584.

Khan, M.A. and Hasbullah, H. and Nazir, B. and Khan, I.A. (2014) An energy efficient simultaneous-node repositioning algorithm for mobile sensor networks. Scientific World Journal, 2014.

Khan, K. and Baharudin, B. and Khan, A. and Ullah, A. (2014) Mining opinion components from unstructured reviews: A review. Journal of King Saud University - Computer and Information Sciences, 26 (3). pp. 258-275.

Besrour, S. and Rahim, L.B.A. and Dominic, P.D.D. (2014) The study of available techniques for existing requirements engineering challenges based on literature review evidences. Research Journal of Applied Sciences, Engineering and Technology, 8 (19). pp. 2082-2091.

Salihi, I.U. and Kutty, S.R.M. and Isa, M.H. and Aminu, N. and Ezerie, H. (2014) Microwave incinerated sugarcane bagasse ash (MISCBA) as a low cost adsorbent for the removal of zinc in aqueous solution. WIT Transactions on Ecology and the Environment, 186. pp. 281-290.

Osman, S.B.S. and Fikri, M.N. and Siddique, F.I. (2014) Correlation of electrical resistivity with some soil parameters for the development of possible prediction of slope stability and bearing capacity of soil using electrical parameters. Pertanika Journal of Science and Technology, 22 (1). pp. 139-152.

Ismail, A.F. and Sapari, N. and Abdul Wahab, M.M. (2014) Vegetative swale for treatment of stormwater runoff from construction site. Pertanika Journal of Science and Technology, 22 (1). pp. 55-64.

Johnson, O.A. and Madzlan, N. and Kamaruddin, I.B. (2014) Effect of curing age on the compressive strength of petrovege blocks. Advanced Materials Research, 980. pp. 91-96.

Harikrishnan, K. and Ashok, D. and Dominic, P.D.D. and Anand, S.J.J. (2014) A study on psychological modelling of market maven for marketing operations with special reference to Indian market. International Journal of Business Excellence, 7 (4). pp. 473-498.

Khan, M.A. and Jeoti, V. (2014) A Novel Design of Chaos Based S-Box Using Difference Distribution Table (CD S-Box). Communications in Computer and Information Science, 420 CC. pp. 223-230.

Riaz, N. and Bustam, M.A. and Chong, F.K. and Man, Z.B. and Khan, M.S. and Shariff, A.M. (2014) Photocatalytic degradation of DIPA using bimetallic cu-ni/tio2 photocatalyst under visible light irradiation. Scientific World Journal, 2014.

Eltoukhy, M.M. and Faye, I. (2014) An optimized feature selection method for breast cancer diagnosis in digital mammogram using multiresolution representation. Applied Mathematics and Information Sciences, 8 (6). pp. 2921-2928.

Sagir, M. and Tan, I.M. and Mushtaq, M. and Nadeem, M. (2014) CO2 Mobility and CO2/Brine Interfacial Tension Reduction by Using a New Surfactant for EOR Applications. Journal of Dispersion Science and Technology, 35 (11). pp. 1512-1519.

Rudra Narsimha Rao, G. and Nand Gopal, E. and Sharma, K.V. (2014) Cost effective solution for energy efficiency in urban water supplies: Developing countries. International Journal of Applied Engineering Research, 9 (18). pp. 4667-4682.

Ty, P. and Potty, N.S. and Akram, M.K.M. (2014) Mathematical matrix method to predict project total cost & schedule. International Journal of Applied Engineering Research, 9 (18). pp. 5029-5056.

Magzoub, M.A. and Saad, N.B. and Ibrahim, R.B. (2014) Study and analysis of power system stabiliser performance using artificial neural network. Applied Mechanics and Materials, 575. pp. 605-609.

Shaikh, P.H. and Nor, N.B.M. and Nallagownden, P. and Elamvazuthi, I. (2014) Stochastic optimized intelligent controller for smart energy efficient buildings. Sustainable Cities and Society, 13. pp. 41-45.

Zia-ul-Mustafa, M. and Ahmad, F. and Megat-Yusoff, P.S.M. and Aziz, H. (2014) The effect of wollastonite filler on thermal performance of intumescent fire retardant coating. Advanced Materials Research, 970. pp. 328-331.

Mohd Hashim, F.M. and Ahmad, M.F.A. (2014) Determination of nozzle angle for flow performance in supersonic subsea compact wet gas separator. Advanced Materials Research, 980. pp. 117-121.

Mengal, A.N. and Karuppanan, S. and Wahab, A.A. (2014) Basalt carbon hybrid composite for wind turbine rotor blades: A short review. Advanced Materials Research, 970. pp. 67-73.

Akilu, S. and Narahari, M. (2014) Effects of heat generation or absorption on free convection flow of a nanofluid past an isothermal inclined plate. Advanced Materials Research, 970. pp. 267-271.

Yeong, Y.F. and Novichaka, S.A. and Lai, L.S. and Lau, K.K. and Azmi, M.S. (2014) Investigation of ultrasonic pretreatment on the synthesis of Zeolite-T and its CO2 adsorption characteristics. Advanced Materials Research, 970. pp. 35-38.

Albarody, T.M.B. and Mustaffa, Z.B. and Liew, M.S. (2014) Smart and robust composite tube columns frames for offshore sub-structure construction. Advanced Materials Research, 983. pp. 11-15.

Iqbal, M.J. and Faye, I. and Samir, B.B. and Md Said, A. (2014) Efficient feature selection and classification of protein sequence data in bioinformatics. Scientific World Journal, 2014.

Abbas, A.H. and Fadhil, M. and Aris, M.S. and Ibrahim, A.B.A. and Aniza, N. (2014) A non-isothermal thermo gravimetric kinetic analysis of malaysian poultry-processing-dewatered-sludge. Advanced Materials Research, 970. pp. 217-223.

Fadhil, M. and Hassan, A. and Aris, S. and Abdalla, A. and Aniza, N. (2014) The prospects of electricity generation from Poultry Processing Dewatered Sludge (PPDS) in Malaysia. Advanced Materials Research, 970. pp. 228-232.

Mohamed, M. and Yusup, S. and Wahyudiono and Machmudah, S. and Goto, M. (2014) Effect of temperature on the extraction of bio-oil from oil palm mesocarp fiber using supercritical CO2. Jurnal Teknologi (Sciences and Engineering), 69 (4). pp. 39-42.

Lias, M.R. and Awang, M. and Rao, T.V.V.L.N. and Fadhil, M. (2014) Evaluation of spur gear pair on tooth root bending stress in yawing misalignment contactcondition. Advanced Materials Research, 980. pp. 97-101.

Trinh, T.H. and KuShaari, K. and Shuib, A.S. and Bin Ismail, L. and Basit, A. and Azeem, B. (2014) Modeling the release of urea from coated urea: The constant release stage. Advanced Materials Research, 970. pp. 166-171.

Lai, L.S. and Yeong, Y.F. and Keong Lau, K. and Azmi, M.S. (2014) Zeolitic Imidazolate Frameworks (ZIF): A Potential Membrane for CO2/CH4 Separation. Separation Science and Technology (Philadelphia), 49 (10). pp. 1490-1508.

Mustaffa, Z.B. and Albarody, T.M.B. (2014) Flexible thermosetting pipe. Advanced Materials Research, 983. pp. 444-449.

Ibrahim, N.N.M. and Hussain, P. and Awang, M. (2014) Microstructure and hardness of diffusion bonded sialon-AISI 420 martensitic stainless steel. Advanced Materials Research, 974. pp. 199-204.

Ramli, N.K. and Majeed, Z. and Shuib, A.S. and Mansor, N. and Man, Z.B. (2014) The potential of quercetin in Psidium Guajava L. leaves extract as bioinhibitor for controlled released fertilizer. Advanced Materials Research, 970. pp. 16-19.

Dewangan, S. and Biswas, C.K. and Gangopadhyay, S. (2014) Influence of different tool electrode materials on EDMed surface integrity of AISI P20 tool steel. Materials and Manufacturing Processes, 29 (11-12). pp. 1387-1394.

Kumar, A. and Hegde, G. and Manaf, S.A.B.A. and Ngaini, Z. and Sharma, K.V. (2014) Catalyst free silica templated porous carbon nanoparticles from bio-waste materials. Chemical Communications, 50 (84). pp. 12702-12705.

Nuruddin, M.F. and Azme, N.M. and Chang, K.Y. (2014) Utilization of microwave incinerated rice husk ash (MIRHA) in ductile self-compacting concrete. WIT Transactions on Ecology and the Environment, 191. pp. 1301-1312.

Lai, L.S. and Yeong, Y.F. and Ani, N.C. and Lau, K.K. and Shariff, A.M. (2014) Effect of synthesis parameters on the formation of zeolitic imidazolate framework 8 (ZIF-8) nanoparticles for CO2 adsorption. Particulate Science and Technology, 32 (5). pp. 520-528.

Moradi, B. and Awang, M. and Bashir, A. and Sabil, K.M. (2014) Effects of alcohols on interfacial tension between carbon dioxide and crude oil at elevated pressures and temperature. Journal of Petroleum Science and Engineering, 121. pp. 103-109.

Dass, S.C. and Lim, C.Y. and Maiti, T. (2014) A generalized mixed model framework for assessing fingerprint individuality in presence of varying image quality. Annals of Applied Statistics, 8 (3). pp. 1314-1340.

Kadry, H. and Zakaria, N. and Cheong, L.Y. and Abdel-Aty, M. (2014) Entropy squeezing of multi-photon field interacting with a single Cooper-pair box. Optik, 125 (18). pp. 5134-5140.

Fayek, H.M. and Elamvazuthi, I. and Perumal, N. and Venkatesh, B. (2014) A controller based on Optimal Type-2 Fuzzy Logic: Systematic design, optimization and real-time implementation. ISA Transactions, 53 (5). pp. 1583-1591.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Ku Shaari, K.Z. (2014) Visual Characterization of Airless Water Spray Jet Breakup and Vortex Clouds Formation at Elevated Temperature and Pressure. Arabian Journal for Science and Engineering, 39 (10). pp. 7241-7250.

Naz, M.Y. and Sulaiman, S.A. (2014) Testing of starch-based carbohydrate polymer coatings for enhanced urea performance. Journal of Coatings Technology and Research, 11 (5). pp. 747-756.

Kim, D.K. and Kim, H.B. and Zhang, X. and Li, C.G. and Paik, J.K. (2014) Ultimate strength performance of tankers associated with industry corrosion addition practices. International Journal of Naval Architecture and Ocean Engineering, 6 (3). pp. 507-528.

Hidayat, M.I.P. and Wahjoedi, B.A. and Parman, S. and Megat Yusoff, P.S.M. (2014) Meshless local B-spline-FD method and its application for 2D heat conduction problems with spatially varying thermal conductivity. Applied Mathematics and Computation, 242. pp. 236-254.

Aja, O.C. and Al-Kayiem, H.H. (2014) Review of municipal solid waste management options in Malaysia, with an emphasis on sustainable waste-to-energy options. Journal of Material Cycles and Waste Management, 16 (4). pp. 693-710.

Maqsood, K. and Mullick, A. and Ali, A. and Kargupta, K. and Ganguly, S. (2014) Cryogenic carbon dioxide separation from natural gas: A review based on conventional and novel emerging technologies. Reviews in Chemical Engineering, 30 (5). pp. 453-477.

Ali, A. and Maqsood, K. and Syahera, N. and Shariff, A.B.M. and Ganguly, S. (2014) Energy minimization in cryogenic packed beds during purification of natural gas with high co2 content. Chemical Engineering and Technology, 37 (10). pp. 1675-1685.

Murugesan, R. and Dominic, P.D.D. (2014) Socio, economic and psychological determinants of entrepreneurial intentions: A structural equation model. Global Business and Economics Review, 16 (4). pp. 396-415.

Moghadam, R.A. and Yusup, S. and Uemura, Y. and Chin, B.L.F. and Lam, H.L. and Al Shoaibi, A. (2014) Syngas production from palm kernel shell and polyethylene waste blend in fluidized bed catalytic steam co-gasification process. Energy, 75. pp. 40-44.

Dan-Mallam, Y. and Abdullah, M.Z. and Megat Yusoff, P.S.M. (2014) The effect of hybridization on mechanical properties of woven kenaf fiber reinforced polyoxymethylene composite. Polymer Composites, 35 (10). pp. 1900-1910.

Ali, A.M. and Padmanabhan, E. (2014) Quartz surface morphology of Tertiary rocks from North East Sarawak, Malaysia: Implications for paleo-depositional environment and reservoir rock quality predictions. Shiyou Kantan Yu Kaifa/Petroleum Exploration and Development, 41 (6). pp. 697-704.

Dewangan, S. and Biswas, C.K. and Gangopadhyay, S. (2014) Influence of different tool electrode materials on EDMed surface integrity of AISI P20 tool steel. Materials and Manufacturing Processes, 29 (11-12). pp. 1387-1394.

Vakili, M. and Zwain, H.M. and Rafatullah, M. and Gholami, Z. and Mohammadpour, R. (2014) Potentiality of Palm Oil Biomass with Cow Dung for compost production. KSCE Journal of Civil Engineering, 19 (7). pp. 1994-1999.

Rahmam, S. and Mohamed, N.M. and Sufian, S. (2014) Effect of acid treatment on the multiwalled carbon nanotubes. Materials Research Innovations, 18. S6-196-S6-199.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Ku Shaari, K.Z. (2014) Study of primary atomisation phenomenon of modified starch solution stream at elevated temperature. Materials Research Innovations, 18. S6-135-S6-139.

Mohd Zabidi, N.A. and Pilus, R. and Rahman, S. and Ali, S. (2014) Characterisation of Co/Mn catalysts synthesised via reverse microemulsion method. Materials Research Innovations, 18. S6-477-S6-479.

Ilyas, S.U. and Pendyala, R. and Marneni, N. (2014) Dispersion behaviour and agglomeration effects of zinc oxide nanoparticles in ethanol-water mixtures. Materials Research Innovations, 18. S6-179-S6-183.

Firas, A.A.K. and Shariff, A.M. and Keong, L.K. and Mellon, N. (2014) Novel approach for CO2-enriched natural gas dehydration via adsorption using 13X zeolite as solid desiccants. Materials Research Innovations, 18. S6-228-S6-231.

Ghosh, P. and Halder, D. and Ganguly, S. and Banerjee, D. and Kargupta, K. (2014) Phosphosilicate gel-polybenzimidazole nanocomposite novel membrane for fuel cell application. International Journal of Plastics Technology, 18 (3). pp. 403-408.

Naz, M.Y. and Sulaiman, S.A. (2014) Surface Morphology and Dissolution Rate of Slow Discharge Urea Coated with Starch-Urea-Borax Matrix. Polymer - Plastics Technology and Engineering, 53 (17). pp. 1778-1787.

Khan, M.A. and Saddiq, S.F. and Islam, S. and Khan, I. and Ching, D.L.C. (2014) Epidemic model of leptospirosis containing fractional order. Abstract and Applied Analysis, 2014.

Azmi, W.H. and Sharma, K.V. and Sarma, P.K. and Mamat, R. and Anuar, S. and Syam Sundar, L. (2014) Numerical validation of experimental heat transfer coefficient with SiO2 nanofluid flowing in a tube with twisted tape inserts. Applied Thermal Engineering, 73 (1). pp. 296-306.

Azmi, W.H. and Sharma, K.V. and Sarma, P.K. and Mamat, R. and Anuar, S. and Syam Sundar, L. (2014) Numerical validation of experimental heat transfer coefficient with SiO2nanofluid flowing in a tube with twisted tape inserts. Applied Thermal Engineering, 73 (1). pp. 294-304.

Gupta, R. and Elamvazuthi, I. and Dass, S.C. and Faye, I. and Vasant, P. and George, J. and Izza, F. (2014) Curvelet based automatic segmentation of supraspinatus tendon from ultrasound image: A focused assistive diagnostic method. BioMedical Engineering Online, 13 (1).

Karim, R.A. and Hussain, A.S. and Mohd Zain, A. (2014) Production of bioethanol from empty fruit bunches cellulosic biomass and Avicel PH-101 cellulose. Biomass Conversion and Biorefinery, 4 (4). pp. 333-340.

Hasan, M.H. and Jaafar, J. and Hassan, M.F. (2014) Monitoring web services� quality of service: a literature review. Artificial Intelligence Review, 42 (4). pp. 835-850.

Jatoi, M.A. and Kamel, N. and Malik, A.S. and Faye, I. (2014) EEG based brain source localization comparison of sLORETA and eLORETA. Australasian Physical and Engineering Sciences in Medicine, 37 (4). pp. 713-721.

Albarody, T.M.B. and Al-Kayiem, H.H. (2014) Dynamic analysis of laminated composite thermo-magneto-electro-elastic shells. Journal of Mechanical Science and Technology, 28 (12). pp. 4877-4891.

Narayanan, S.P. and Mathews, M.S. (2014) Roofing sheets systems for industrial sheds in cyclone prone areas based on dynamic testing. Malaysian Construction Research Journal, 14 (1). pp. 63-78.

Narayanan, S.P. and Mathews, M.S. (2014) Roofing sheets systems for industrial sheds for different wind zones based on static load testing. Malaysian Construction Research Journal, 14 (1). pp. 79-96.

Badruddin, N. and Evans, J. and Hanly, S.V. (2014) Binary power allocation in symmetric Wyner-type interference networks. IEEE Transactions on Wireless Communications, 13 (12). pp. 6903-6914.

Menier, D. and Pierson, B. and Chalabi, A. and Ting, K.K. and Pubellier, M. (2014) Morphological indicators of structural control, relative sea-level fluctuations and platform drowning on present-day and Miocene carbonate platforms. Marine and Petroleum Geology, 58 (PB). pp. 776-788.

Talebian, S.H. and Tan, I.M. and Masoudi, R. and Onur, M. (2014) Fluid-fluid interactions in a system of CO2, oil, surfactant solution, and brine at high pressures and temperatures - A Malaysian reservoir case. Journal of Petroleum Science and Engineering, 124. pp. 313-322.

Savva, D. and Pubellier, M. and Franke, D. and Chamot-Rooke, N. and Meresse, F. and Steuer, S. and Auxietre, J.L. (2014) Different expressions of rifting on the South China Sea margins. Marine and Petroleum Geology, 58 (PB). pp. 579-598.

Mansor, M.Y. and Rahman, A.H.A. and Menier, D. and Pubellier, M. (2014) Structural evolution of Malay Basin, its link to sunda block tectonics. Marine and Petroleum Geology, 58 (PB). pp. 736-748.

Pubellier, M. and Morley, C.K. (2014) The basins of Sundaland (SE Asia): Evolution and boundary conditions. Marine and Petroleum Geology, 58 (PB). pp. 555-578.

Aurelio, M.A. and Forbes, M.T. and Taguibao, K.J.L. and Savella, R.B. and Bacud, J.A. and Franke, D. and Pubellier, M. and Savva, D. and Meresse, F. and Steuer, S. and Carranza, C.D. (2014) Middle to late cenozoic tectonic events in south and central palawan (philippines) and their implications to the evolution of the south-eastern margin of South China Sea: Evidence from onshore structural and offshore seismic data. Marine and Petroleum Geology, 58 (PB). pp. 658-673.

Pichot, T. and Delescluse, M. and Chamot-Rooke, N. and Pubellier, M. and Qiu, Y. and Meresse, F. and Sun, G. and Savva, D. and Wong, K.P. and Watremez, L. and Auxiètre, J.-L. (2014) Deep crustal structure of the conjugate margins of the SW South China Sea from wide-angle refraction seismic data. Marine and Petroleum Geology, 58 (PB). pp. 627-643.

Abd. Rahman, A.H. and Menier, D. and Mansor, M.Y. (2014) Sequence stratigraphic modelling and reservoir architecture of the shallow marine successions of Baram field, West Baram Delta, offshore Sarawak, East Malaysia. Marine and Petroleum Geology, 58 (PB). pp. 687-703.

Ganesan, T. (2014) Investigation of dephasing in an open quantum system under chaotic influence via a fractional Kohn-Sham scheme. International Journal of Quantum Chemistry, 114 (24). pp. 1660-1669.

Ilyas, S.U. and Pendyala, R. and Marneni, N. (2014) Preparation, sedimentation, and agglomeration of nanofluids. Chemical Engineering and Technology, 37 (12). pp. 2011-2021.

Azmi, W.H. and Sharma, K.V. and Sarma, P.K. and Mamat, R. and Najafi, G. (2014) Heat transfer and friction factor of water based TiO2 and SiO2 nanofluids under turbulent flow in a tube. International Communications in Heat and Mass Transfer, 59. pp. 30-38.

Nizamani, Z. and Kurian, V.J. and Liew, M.S. (2014) Determination of environmental load factors for ISO 19902 code in offshore Malaysia using FORM structural reliability method. Ocean Engineering, 92. pp. 31-43.

Amok, J.O.M. and Saad, N.M. (2014) Error probability performance analysis for multicarrier direct sequence code division multiple access multiple-input-multiple-output systems over correlated η-μ fading channels. IET Communications, 8 (17). pp. 2971-2983.

Yahya, N. and Kamel, N.S. and Malik, A.S. (2014) Subspace-based technique for speckle noise reduction in ultrasound images. BioMedical Engineering Online, 13 (1).

Habib, K. and Saha, B.B. and Koyama, S. (2014) Study of various adsorbent-refrigerant pairs for the application of solar driven adsorption cooling in tropical climates. Applied Thermal Engineering, 72 (2). pp. 266-274.

Khan, M.Y. and Abdul Karim, Z.A. and Aziz, A.R.A. and Tan, I.M. (2014) Experimental investigation of microexplosion occurrence in water in diesel emulsion droplets during the leidenfrost effect. Energy and Fuels, 28 (11). pp. 7079-7084.

Ud Din, I. and Shaharun, M.S. and Subbarao, D. and Naeem, A. (2014) Homogeneous deposition precipitation method for synthesis of carbon nanofibre based Cu-ZrO2 catalyst for hydrogenation of CO2 to methanol. Applied Mechanics and Materials, 446-44. pp. 83-87.

Abdalrahman, M.G. and Dennis, J.O. and Khir, M.H.M. (2014) Design and modeling of a CMOS MEMS gravimetric sensor. Applied Mechanics and Materials, 446-44. pp. 1073-1077.

Alhaj, H.M.M. and Nor, N.M. and Asirvadam, V.S. and Abdullah, M.F. (2014) Fundamental frequency estimation in power system through the utilization of sliding window-LMS method. Applied Mechanics and Materials, 446-44. pp. 764-771.

Shahzad, A. and Saad, M.N. and Walter, N. and Malik, A.S. and Meriaudeau, F. (2014) Hyperspectral venous image quality assessment for optimum illumination range selection based on skin tone characteristics. BioMedical Engineering Online, 13 (1).

Rashid, U. and Ahmad, J. and Yunus, R. and Ibrahim, M. and Masood, H. and Syam, A.M. (2014) Momordica Charantia seed oil methyl esters: A kinetic study and fuel properties. International Journal of Green Energy, 11 (7). pp. 727-740.

Prabaningrum, N. and Ismail, L.B. and Subbarao, D. (2014) In-situ methanolysis of Jatropha curcas seeds in Soxhlet extractor. Advanced Materials Research, 917. pp. 72-79.

Lee, S.-P. and Ramli, A. and Kutty, M.G. and Hamid, S.B.A. (2014) Incorporation of Pd nanoparticles on rod and necklace-like SBA-15 supports materials. Advanced Materials Research, 917. pp. 10-17.

Harimurt, S. and Ur Rahmah, A. and Aziz Omar, A. and Murugesan, T. (2014) UV/H2O2 process for removal of total organic carbon from refinery effluent: Screening of influence factors using response surface methodology. Advanced Materials Research, 917. pp. 168-177.

Abdullah, S.B. and Man, Z. and Ismail, L. and Mutalib, M.I.A. and Bustam, M.A. (2014) Solubility parameters based on refractive index data of ionic liquid. Advanced Materials Research, 917. pp. 45-55.

Jusoh, N. and Keng, L.K. and Shariff, A.M. (2014) Preparation and characterization of polysulfone membrane for gas separation. Advanced Materials Research, 917. pp. 307-316.

Mohd Noor, N.I. and Eldemerdash, U.U.M.N. and Shariff, A.M. (2014) Modification of adsorbents for high CO2 content capture from stranded natural gas reserve: A critical review. Advanced Materials Research, 917. pp. 342-349.

Rafiq, S. and Maulud, A.S. and Man, Z.B. and Muhammad, N. (2014) Gas permeation models in mixed matrix membranes for gas separation. Advanced Materials Research, 917. pp. 317-324.

Khan, Z. and Yusup, S. and Ahmad, M.M. (2014) Performance study of Ni catalyst with quicklime (CaO) as CO2 adsorbent in palm kernel shell steam gasification for hydrogen production. Advanced Materials Research, 917. pp. 283-291.

Aziz, H.A. and Shariff, A.M. and Rusli, R. (2014) Operational Training Management System (OPTRAMS) for safe operation in process plant. Advanced Materials Research, 917. pp. 325-331.

Norizan, A. and Uemura, Y. and Wissam, N.O. and Tsutsui, T. (2014) Bio-oil derived from palm kernel shell in fluidized bed reactor: Effect of particle size. Advanced Materials Research, 917. pp. 63-71.

Ellateif, T.M.A. and Maitra, S. and Murugesan, T. and Mohd Azizi, K.A. (2014) Effect of aluminium sol on silica nanoparticles texture and properties. Advanced Materials Research, 917. pp. 56-60.

Abdullah, B.B. and Vo, D.-V.N. and Chowdhury, S. (2014) Modeling the effect of temperature-induced surface tension gradient in coating processes. Advanced Materials Research, 917. pp. 181-188.

Zaine, S.N.A. and Mohamed, N.M. and Bustam, M.A. (2014) Optimized TiO2 nanocrystallites aggregates for enhanced efficiency in dye solar cells. Advanced Materials Research, 917. pp. 35-44.

Riaz, N. and Chong, F.K. and Man, Z.B. and Dutta, B.K. and Ramli, R.M. and Khan, M.S. (2014) Visible light photodegradation of azo dye by Cu/TiO2. Advanced Materials Research, 917. pp. 151-159.

Abdul Wahab, N. and Rusli, R. and Shariff, A.M. (2014) Evaluation of inherent safety strategies using FAHP to reduce human error. Advanced Materials Research, 917. pp. 332-341.

Ramli, R.M. and Kait, C.F. and Omar, A.A. (2014) Photocatalytic degradation of diisopropanolamine in heterogeneous photo-fenton system. Advanced Materials Research, 917. pp. 160-167.

Ban, Z.H. and Keong, L.K. and Shariff, A.M. (2014) Physical absorption of CO2 capture: A review. Advanced Materials Research, 917. pp. 134-143.

Mohd Zain, A. and Shaaban, M.G. and Mahmud, H. (2014) Leachability of solidified petroleum sludge. Advanced Materials Research, 917. pp. 123-133.

Zainal-Abidin, M. and Yusoff, N. and Mohd-Siraj, K. (2014) A taguchi-SQP approach for minimizing energy per unit diesel production at crude distillation unit. Advanced Materials Research, 917. pp. 220-231.

Murshid, G. and Shariff, A.M. and Keong, L.K. and Azmi Busam, M. (2014) Solubility of carbon dioxide in aqueous solutions of Piperazine (PZ) at elevated pressures. Advanced Materials Research, 917. pp. 144-150.

Ullah, S. and Nadeem, M. and Shariff, A.B.M. and Ahmad, F. and Shahid, S.A. and Sagir, M. and Raza Malik, M.R. and Mushtaq, M. (2014) The synergistic effect of thiourea and surfactants on corrosion inhibition of stainless steel-316 in hydrochloric acid. Advanced Materials Research, 917. pp. 28-34.

Salam, M.A. and Sufian, S. (2014) Hydrogen adsorption capacity investigation of Ni-Co-Al mixed oxides. Advanced Materials Research, 917. pp. 360-364.

Kee, W.M. and Shariff, A.M. and Bustam, M.A. and Keong, L.K. and Karikalan, T. and Murshid, G. (2014) Density, viscosity and CO2 solubility of novel solvent. Advanced Materials Research, 917. pp. 301-306.

Kamel, Nidal and Malik, A (2014) The fundamentals of EEG signal processing. EEG/ERP Analysis: Methods and Applications. pp. 21-71.

Laude, Augustinus and Ganesan, Karthikeyan and Acharya, Rajendra and Chua, Chua K and Ng, Eddie Y and Tang, Tong Boon (2014) Computer-aided analysis of diabetic retinopathy using trace transform functionals and optimization of data training-testing sizes. Investigative Ophthalmology & Visual Science, 55 (13). p. 4823.

Aslam, Muhammad Zubair and Tang, Tong Boon (2014) A high resolution capacitive sensing system for the measurement of water content in crude oil. Sensors, 14 (7). pp. 11351-11361.