Items where Department / MOR is "Mechanical Engineering" and Year is 2012

Group by: Creators | Item Type | No Grouping

Jump to: A | B | C | G | H | K | M | N | O | P | R | S | T | U | V | W

Number of items: 86.

A

A Majid, M Amin and Sulaiman, S. A. and Ibrahim, Idris and Baharudin , Z. (2012) Causal Model for Peak and Off Peak Waste Heat Recovery for Chilled Water Production. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

A Majid, M Amin and Sulaiman, S. A. and Ibrahim, Idris and Baharudin , Z. (2012) Causal Model for Peak and Off Peak Waste Heat Recovery for Chilled Water Production. [Citation Index Journal]

Abd Majid, Mohd Amin and Nasir Rashid, Meseret and Waluyo, Joko (2012) Operation and Performance of a Thermal Energy Storage System: A Case Study of Campus Cooling using Co-generation Plant. Energy Procedia, 14. pp. 1280-1285. ISSN 1876-6102

Al-Kayiem, Hussain H. and Khor, Yin Yin and Chin, Yee Sing (2012) Numerical Simulation of Solar Chimney Integrated with Exhaust of Thermal Power Plant. In: Advanced Computational Methods and Experiments in Heat Transfer XII. WIT Press.

Al-Wakeel, H.B. and Abdul Karim, Z. A. and Al-Kayiem, Hussain H. (2012) Soot reduction strategy: A review. [Citation Index Journal]

Al-Wakeel, Haitham and Abdul Karim, Z. A. and Mat Jamlus, M. H. (2012) Soot Reduction Strategy: A Review. Journal of Applied Sciences, 12 (23). pp. 2338-2345. ISSN 1812-5654

Ali, Asad and A Majid, Mohd Amin and Muhammad, Masdi (2012) Comparative Study between Degradation Analysis and API 510 Remaining Life Evaluation Method for Feed Gas Filter Vessel Reliability Analysis. In: 2012 The 3rd International Conference on Production, Energy and Reliability (ICPER2012), 12-14 July 2012, Kuala Lumpur Convention Center.

Amir, Norlaili and Ahmad, Faiz and Megat-Yusoff, Puteri Sri Melor (2012) Mechanisms of Char Strengthening in the Fibre Reinforced Intumescent Coatings. Journal of Applied Sciences, 12 (23). pp. 2459-2463. ISSN 1812-5654

Amir, Norlaili and Ahmad, Faiz and Megat-Yusoff, Puteri Sri Melor (2012) Mechanisms of Char Strengthening in the Fibre Reinforced Intumescent Coatings (FRIC) Determined via Scanning Electron Microscopy. In: The International Conference on Production, Energy and Reliability (ICPER2012), 12-14 June 2012, Kuala Lumpur Convention Centre.

Amir, Norlaili and Faiz , Ahmad and Puteri , Sri Melor Bt Megat Yusoff (2012) Char Strength of Wool Fibre Reinforced Epoxy-Based Intumescent Coatings (FRIC). In: International Conference on Advanced Material Engineering & Technology 2012 (ICAMET 2012), 28-30 Nov 2012, Bayview Beach Resort, Pulau Pinang.

B

Badri, T. M. and Al-Kayiem, Hussain H. (2012) Dynamic Response of Magneto-Thermo-Electro-elastic shell structure closed-circuit surface condition. Journal of Applied Sciences, 12 (24). pp. 2541-2547. ISSN 1812-5654

Badri, T. M. and Al-Kayiem, Hussain H. (2012) A Static Analysis of Piezo-laminated Shell Structures. In: INTERNATIONAL CONFERENCE ON PRODUCTION, ENERGY AND RELIABILITY, ICPER2012 , 12-14 June 2012, Kuala Lumpur convention centre.

Badri, T.M. and Al-Kayiem, Hussain H. (2012) Analytical Solution for Simply Supported and Multilayered Magneto-Thermo-Electro-Elastic Plates. [Citation Index Journal]

Batcha, M. F. M. and Nawi, M. A. M. and Sulaiman, S. A. and Raghavan, V. R. (2012) Numerical Investigation of Air Flow in a Swirling Fluidized Bed. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Batcha, M. F. M. and S.A., Sulaiman and Raghavan, V. R. (2012) Hydrodynamics of Oil Palm Frond in a Swirling Fluidized Bed Dryer. Applied Mechanics and Materials, 117-11. pp. 1829-1833. ISSN 1662-7482

Batcha, M. F. M. and Sulaiman, S. A. and Raghavan, V. R. (2012) Hydrodynamics of Oil Palm Frond in a Swirling Fluidized Bed Dryer. Applied Mechanics and Materials, 117-11. pp. 1829-1833. ISSN 1662-7482

Belusko, M and Halawa,, E. and Bruno, F. (2012) Characterising PCM thermal storage systems using the effectiveness-NTU approach. [Citation Index Journal]

Biswas, C.K. and Pradhan, M.K. (2012) FEM of residual stress of EDMed surfaces. Advanced Materials Research, 383-39. pp. 872-876.

C

Chin, Yee Sing and Aris, Mohd. Shiraz (2012) A Study of Biomass Fuel Briquettes from Oil Palm Mill Residues. In: ESTCON-ICPER2012, 12-14 June2012, KL Convention Centre. (Submitted)

G

Ghazali, Zulkipli and Abd Majid, Mohd Amin and Mohd, Shawani (2012) Optimal Solution of Transportation Problem Using Linear Programming: A Case of a Malaysian Trading Company. [Citation Index Journal]

Ghazali, Zulkipli and Abd Majid , M Amin and Mohd , Shazwani (2012) Optimal Solution of Transportation Problem Using Linear Programming: A Case of a Malaysian Trading Company. In: 2012 The 3rd International Conference on Production, Energy and Reliability (ICPER2012), 12-14 July 2012, Kuala Lumpur Convention Center.

Goo, Jia Jun and Raghavan, Vijay R. and Chin, Yee Sing (2012) Experimental Study on the Hydrodynamics of Swirling Fluidized Bed. Applied Mechanics and Materials. (Submitted)

Guangul, F. M. and Sulaiman, S. A. (2012) A Novel Approach for Solving the Problem of Bridging in Fixed Bed Gasifiers. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Guangul, F. M. and Sulaiman, S. A. and Moni, M. N. Z. and Atnaw, Samson Mekbib and Konda, R. E. (2012) Investigation of the Hygroscopic Property of Oil Palm Fronds for Gasification Process. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Guangul, F. M. and Sulaiman, S. A. and Ramli, Anita (2012) Gasifier selection, design and gasification of oil palm fronds with preheated and unheated gasifying air. Bioresource Technology, 126. pp. 224-232. ISSN 0960-8524

H

Habib, Khairul and Helder, Sitoi (2012) Thermodynamic Analysis of Ideal Adsorption Cooling System using Activated Carbon/N-Butane Pair. In: IEEE Conference on Sustainable Utilization and Development in Engineering and Technology, 6-9 October 2012, Kuala Lumpur.

Hagos, F.Y. and Aziz, A. Rashid A. and Sulaiman, S. A. (2012) Study of Syngas Combustion Parameters Effect in an Internal Combustion Engine. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Hagos, F.Y. and Aziz, A. Rashid A. and Sulaiman, S. A. and Firmansyah, Firmansyah (2012) Combustion Characteristics of Late Injected CNG in a Spark Ignition Engine under Lean Operating Condition. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Halawa,, E. and Van Hoof, J. (2012) The adaptive approach to thermal comfort: A critical overview. Energy and Buildings, 51. pp. 101-110. ISSN 0378-7788

K

Kareem, M. W. and Habib, Khairul and Sulaiman, S. A. (2012) Comparative Study of Single Pass and Double Pass Solar Collector Filled with Porous Media. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Konda, R. E. and Sulaiman, S. A. and Ariwahjoedi, B. (2012) Syngas Production from Gasification of Oil Palm Fronds with an Updraft Gasifier. [Citation Index Journal]

Konda, R.E. and Sulaiman, S. A. and Ariwahjoedi, B. (2012) Syngas production from Gasification of Oil Palm Fronds with an Updraft Gasifier. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

M

Mahgoub, B. K. M. and Sulaiman, S. A. and Abdul Karim, Z. A. (2012) Performance of a compression ignition engine fuelled by diesel and imitated syngas. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Megat-Yusoff, Puteri Sri Melor and Mat Shayuti, Muhammad S. and Abdullah, Mohamad Zaki (2012) Water Absorption Properties and Morphology of Polypropylene/Polycarbonate/Polypropylene-graft-Maleic Anhydride Blends. In: The 3rd International Conference on Plant Equipment and Reliability, (ICPER2012), 12 - 14 June 2012, Kuala Lumpur.

Mekbib, S. and Sulaiman, S. A. (2012) Study on Pyrolysis Behavior of Oil-Palm Fronds. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Mohideen, M. F. and Sreenivasan, B. and Sulaiman, S. A. and Raghavan, V. R. (2012) Heat transfer in a swirling fluidized bed with geldart type-D particles. Korean J. Chem. Eng.,. pp. 1-6. ISSN ISSN: 0256-1115 (print version);ISSN: 1975-7220 (electronic version)

Mokhlif, N. D. and Al-Kayiem, Hussain H. and Baharom, Masri B (2012) Estimation model for the wax crystal size distribution in solvent dewaxing process. [Citation Index Journal]

Mokhtar, Ainul Akmar and Che Ismail, Mokhtar and Muhammad , Masdi and Hussin, Hilmi (2012) Assessing Piping Failure Probability subject to Corrosion under Insulation using Markov Model. In: 2012 The 3rd International Conference on Production, Energy and Reliability (ICPER), 12 - 14 June, 2012, Kuala Lumpur Convention Center, Kuala Lumpur, Malaysia.

Moni, M. N. Z. and Sulaiman, S. A. (2012) Downdraft Gasification of Oil Palm Frond. Lambert Academic Publishing, Saarbrücken, Germany. ISBN 978-3-659-26503-7

Moni, M. N. Z. and Sulaiman, S. A. (2012) Downdraft Gasification of Oil Palm Frond: Effects of Temperature and Operation Time. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Moni, M. N. Z. and Sulaiman, S. A. (2012) Downdraft Gasification of Oil Palm Frond: Effects of Temperature and Operation Time. [Citation Index Journal]

Moni, M. N. Z. and Sulaiman, S. A. (2012) Method of Processing Oil Palm Frond into Biomass Fuel for Downdraft Gasification. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Muhammad, R. and Ariffin, S. Z. S. T. and Manaf, N. A. and Sulaiman, S. A. (2012) Study on the Effectiveness Rule-of-Thumb Method in Sizing of Air-Conditioning Systems. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Mukhlif, Nassir D. and Al-Kayiem, Hussain H. and Baharom, Masri B (2012) Prediction method for the Paraffinic Wax Crystal Size Distribution in Solvent Dewaxing Process. In: INTERNATIONAL CONFERENCE ON PRODUCTION, ENERGY AND RELIABILITY, ICPER2012 , 12-14 June 2012, Kuala Lumpur convention centre.

N

Naim, Abd Rahim and Abd Majid, Mohd Amin and Napiah, Mazlan Napiah (2012) Ranking Interface-Derived Strategic Risks for Large Engineering Projects (LEPs). In: 2012 The 3rd International Conference on Production, Energy and Reliability (ICPER2012), 12-14 June 2012, Kuala Lumpur Convention Center.

Nasir, Meseret and A. Majid, Mohd Amin (2012) Failure Cost Model for a Multi-State Electricity Supply System with Main Utility as Redundancy. In: 2012 The 3rd International Conference on Production, Energy and Reliability (ICPER2012), 12-14 June 2012, Kuala Lumpur Convention Center.

Nordin, Normayati and Raghavan, V. R. and Othman, Safiah and Abdul Karim, Z. A. (2012) COMPATIBILITY OF 3-D TURNING DIFFUSERS BY MEANS OF VARYING AREA RATIOS AND OUTLET-INLETCONFIGURATIONS. [Citation Index Journal]

O

Okitsu, Jun and Naono, Ken and Sulaiman, S. A. and Zakaria, M.N. and Oxley, A. (2012) Towards Greening a Campus Grid: Free Cooling During Unsociable Hours. In: 2012 IEEE Conference on Control, Systems and Industrial Informatics (ICCSII), 23-26 September 2012, Bandung, Indonesia.

Othoman, M. A. and Kamal, S. N. O. and Zulkipli, M. Z. and Sulaiman, S. A. (2012) Occupants’ Workplace Satisfaction Following Implementation of Minimum Set Point Temperature Directive in Government Office Buildings. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

P

Pannu, Jaspreet and Jaafar, Azuraien and Sariman, M. Z. and Sulaiman, S. A. and Hizami, M. H. (2012) Thermal Shrinkage and Gas Void Formations of Waxy Crude Oil. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Pao, William K. S. and Chen, Xiaohui and Lin, Chao (2012) Optimisation of Insulation Padding for Directional Solidification. In: ICPER 2012, 12-14 June 2012, KLCC.

Pao, William K. S. and Lin, Chao (2012) Combining Expert Formula and Geometric Feature Extraction for Die Design. In: ICPER 2012, 12-14 June 2012, KLCC.

Pradhan, M.K. and Biswas, C.K. (2012) Modeling and analysis of surface crack in EDMed AISI D2 steel. Journal of Manufacturing Technology Research, 4 (3-4). pp. 159-171.

Pradhan, M.K. and Biswas, C.K. (2012) Optimisation of surface integrity model using response surface methodology for EDMed AISI D2 tool steel. International Journal of Mechatronics and Manufacturing Systems, 5 (5-6). pp. 340-360.

Pradhan, Mohan K and Biswas, Chandan Kumar (2012) Investigations Into the Effect of Process Parameters on Material Removal Rate in Electrical Discharge Machining of {AISI} D2 Steel Using Response Surface Methodology. In: Mechatronics and Intelligent Manufacturing. Mechanical Engineering Theory and Applications, Manufacturing Technology Research (978-1-). Nova Science Publisher, USA, pp. 249-266.

R

Renganathan, Sumathi and Abdul Karim, Z. A. and Chong, Su Li (2012) Students’ perception of industrial internship programme. Education + Training, 54 (2/3). pp. 180-191. ISSN 0040-0912

Riza, R and Ariwahjoedi, B. and Sulaiman, S. A. (2012) Solar Variation in the Zero-Dimensional Climates Model: A Numerical Experiment. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

S

S , Krishnan and T, Nagarajan and Ahmad Majdi , Abdul Rani and TVVLN, Rao (2012) Silk Pneumatic Artificial Muscle (SPAM) construction for bio-medical engineering application. In: Business Engineering and Industrial Applications Colloquium (BEIAC), 2012 IEEE.

Sahirman, Sidharta and Saparso, . and Sarjito, Agus and Awang, Mokhtar and Abdul Karim, Z. A. and Sulaiman, S. A. (2012) Economic Viability Study of Palm-Oil Biodiesel. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Shiraz, Mohd. Aris (2012) Experimental Investigation on the Performance Enhancement of Integrated PCM-Flat Plate Solar Collector. Experimental Investigation on the Performance Enhancement of Integrated PCM-Flat Plate Solar Collector.

Shiraz, Mohd. Aris and Chin, Yee Sing (2012) An Experimental Investigation on the Handling and Storage Properties of Biomass Fuel Briquettes Made from Oil Palm Mill Residues. An Experimental Investigation on the Handling and Storage Properties of Biomass Fuel Briquettes Made from Oil Palm Mill Residues.

Sulaiman, S. A. and Anas, M. I. (2012) Torrefaction of Oil Palm Fronds for Enhancement of Fuel Quality. Trends in Applied Sciences Research, 7. pp. 248-255. ISSN 1819-3579

Sulaiman, S. A. and Atnaw, Samson Mekbib and Moni, M. N. Z. (2012) Experimental Study on Temperature Profile of Fixed-Bed Gasification of Oil-Palm Fronds. [Citation Index Journal]

Sulaiman, S. A. and Daud, M. H. (2012) On Droplet Sizes of Sprays of Different Liquids. In: 3rd International Conference on Production, Energy and Reiability, 12-14 June 2012, Kuala Lumpur.

Sulaiman, S. A. and Isa, Nadra and Raskan, N. I. and Harun, N. F. (2012) Study of Indoor Air Quality in Academic Buildings of a University. In: 3rd International Conference on Mechanical & Manufacturing Engineering, 20-21 November 2012, Parit Raja, Malaysia.

Sulaiman, S. A. and Kamarudin, N. A. Z. (2012) Study on Sizes of Bubbles Liquid Flow through a Vertical Pipe. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Sulaiman, S. A. and Karim, M. F. and Moni, M. N. Z. and Atnaw, Samson Mekbib (2012) Gasification Study of Different Plant - Based Biomass Materials. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Sulaiman, S. A. and Khatab, M. M. and Mahgoub, B. K. M. (2012) Effect of fuel additives on the performance of an internal combustion engine. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Sulaiman, S. A. and Mujor, S. N. A. and Ariffin, S. Z. H. S. T. and Muhammad, R. and Manaf, N. A. (2012) A Study on Reduction of Cooling Energy in Glazed Buildings. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Sulaiman, S. A. and Tamby, F. H. and Aris, M.S. (2012) Study on pre-occupancy purging of air for a low occupancy office in a tropical country. Energy Procedia, 14. pp. 818-823.

T

T., V. V. L. N. Rao (2012) Stabilization of Journal Bearing Using Two-Layered Film Lubrication. [Citation Index Journal]

T., V. V. L. N. Rao and A. , M. A. Rani and T. , Nagarajan and F. , M. Hashim (2012) Analysis of slider and journal bearing using partially textured slip surface. Tribology International , 56. pp. 121-128. ISSN 0301-679X

T., V. V. L. N. Rao and A. , M. A. Rani and T. , Nagarajan and F. , M. Hashim (2012) Partially Textured Slider and Journal Bearing Analysis. Jurnal Teknologi, 58. pp. 77-84. ISSN 0127–9696

T. , V. V. L. N. Rao and A. , M. A. Rani and T. , Nagarajan and F. , M. Hashim (2012) Analysis of Journal Bearing Considering the Effects of Surface Layer and Couple Stress Fluids. In: 3rd International Conference on Production Energy and Reliability, 12-14 June, 2012, Kuala Lumpur, Malaysia.

T. , V. V. L. N. Rao (2012) Stability Characteristics of Misaligned Journal Bearing. Advances in Vibration Engineering, 11 (4). pp. 361-370.

T. , V. V. L. N. Rao and A. , M. A. Rani and T. , Nagarajan and F. , M. Hashim (2012) Analysis of Two-layered Porous Journal Bearing using the Brinkman Model. In: 3rd International Conference on Production Energy and Reliability, 12-14 June, 2012, Kuala Lumpur, Malaysia.

T. , V. V. L. N. Rao and A. , M. A. Rani and T. , Nagarajan and F. , M. Hashim (2012) Load Capacity of Partially Textured Journal Bearing with Trapezoidal Recess. In: 3rd International Conference on Mechanical and Manufacturing Engineering, 20-21 November, 2012, UTHM.

Tan, Chee Sheng and Sulaiman, S. A. and Venkiteswaran, V. K. (2012) One-Dimensional Modeling of Hydrodynamics in a Swirling Fluidized Bed. [Citation Index Journal]

U

Ullah, Sami and Ahmad, Faiz and Megat-Yusoff, Puteri Sri Melor (2012) Effect of Boric Acid and Melamine on the Intumescent Fire-Retardant Coating Composition for the Fire Protection of Structural Steel Substrates. [Citation Index Journal]

V

Venkiteswaran, V. K. and Goo, Jia Jun and Chin, Yee Sing and Sulaiman, S. A. and Raghavan, V. R. (2012) Effect of Particle Shape on Bed Pressure Drop in a Swirling Fluidized Bed. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Venkiteswaran, V. K. and Jun, G. J. and Chin, Yee Sing and Sulaiman, S. A. and Raghavan, V. R. (2012) Variation of Bed Pressure Drop with Particle Shapes in a Swirling Fluidized Bed. [Citation Index Journal]

W

Waluyo, Joko and A Majid, M Amin (2012) DEVELOPMENT OF SIMULATION MODEL FOR CHARGING STRATIFIED TES TANK USING TEMPERATURE DISTRIBUTION ANALYSIS. In: 6th Symposium of SEATUC, King Mongkut’s University of Technology Thonburi, Bangkok, Thailand, 6-8 March 2012., 6-8 March 2012, King Mongkut’s University of Technology Thonburi, Bangkok, Thailand, 6-8 March 2012..

Woldeyohannes, Abraham D. and Abd Majid, Mohd Amin (2012) Analogical Approach for Optimizing Natural Gas Transmission Pipeline Network System. Advanced Materials Research, 361-36. pp. 966-973. ISSN 1022-6680

This list was generated on Sun Dec 22 07:59:52 2024 +08.