FEM of residual stress of EDMed surfaces

Biswas, C.K. and Pradhan, M.K. (2012) FEM of residual stress of EDMed surfaces. Advanced Materials Research, 383-39. pp. 872-876.

This is the latest version of this item.

Full text not available from this repository.
Official URL: http://www.scopus.com/inward/record.url?eid=2-s2.0...


Objective of the present work is to model EDM process using ANSYS software, and to investigate the effects of most significant machining parameters (pulse current and pulse duration) on the residual stresses developed in the beneath the spark produced by a single spark. The workpiece material is AISI D2 tool steel. The FEA model is then used to study the relation between these parameters and maximum temperature attended at the end of heating cycle along with residual stress produced at the end of cooling cycle. To establish the residual stresses in the work piece during EDM, the temperature distribution at the end of pulse duration in the work piece has to be estimated first, latter on after cooling the residual stress is determined. In addition, residual stress which is the main aspect responsible for component failure, and the location of tensile peak stress, at the end of cooling cycle are investigated.

Item Type: Article
Subjects: T Technology > TS Manufactures
Departments / MOR / COE: Departments > Mechanical Engineering
Depositing User: Dr Chandan Kumar Biswas
Date Deposited: 25 Oct 2013 01:56
Last Modified: 25 Oct 2013 01:56
URI: http://scholars.utp.edu.my/id/eprint/10074

Available Versions of this Item

Actions (login required)

View Item
View Item