Browse by Type

Group by: Creators | Item Type | No Grouping

Number of items: 443.

Aziz, A.A. and Şekercioğlu, Y. A. (2015) The impact of clustering on the average path length in wireless sensor networks. In: 2014 IEEE 2nd International Symposium on Telecommunication Technologies (ISTT), 24-26 Nov. 2014, Langkawi, MALAYSIA.

Al-Dujaili, Abdullah and Lo, Hai Hiung and Tan, Shawn (2015) ASH1: a Stack-Based Input/ Output Processor for USB Operations. In: IEEE International Conference on Circuit And Systems, 2nd Sep, 2015 to 4th Sep 2015, Langkawi.

Qayyum, Abdul and Malik, Aamir Saeed and Mohamad Saad, Mohamad Naufal (2015) Comparison of Digital Elevation Models Based on High Resolution Satellite Stereo Imagery. In: 2015 International Conference on Space Science and Communication (IconSpace), Langkawi, Malaysia.

Qayyum, Abdul and Malik, Aamir Saeed and Mohamad Saad, Mohamad Naufal (2015) Segmentation of satellite imagery based on pulse-coupled neural network. In: 2015 International Conference on Space Science and Communication (IconSpace), Langkawi, Malaysia.

Subhani, Ahmad Rauf and Malik, Aamir Saeed and Kamel, Nidal and Mohamad Saad, Mohamad Naufal and Nandagopal, D (Nanda) (2015) Experimental evidence for the effects of the Demand-Control model on the cognitive arousal: An EEG based study. In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Almahasneh, Hossam and Kamel , Nidal and Nicolas, Walter and Malik, Aamir Saeed (2015) r-Principal Subspace for Driver Cognitive State Classification. In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Amin, Hafeez Ullah and Malik, Aamir Saeed and Mumtaz, Wajid and Badruddin , Nasreen and Kamel , Nidal (2015) Evaluation of passive polarized stereoscopic 3D display for visual & mental fatigues. In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Khan, Javed and Malik, Aamir Saeed and Kamel , Nidal and Dass, Sarat Chandra and Affandi, Azura Mohd (2015) Segmentation of acne lesion using fuzzy C-means technique with intelligent selection of the desired cluster. In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Ahmad, Rana Fayyaz and Malik, Aamir Saeed and Kamel , Nidal and Reza, Faruque (2015) Object categories specific brain activity classification with simultaneous EEG-fMRI. In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Shahzad, Aamir and Tyng, Chai Meei and Mohamad Saad, Mohamad Naufal and Nicolas, Walter and Malik, Aamir Saeed and Meriaudeau, Fabrice (2015) Subcutaneous veins depth estimation method using Monte Carlo simulations. In: 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Pisa.

Ameen, Mohamed Abul Hassan and Malik, Aamir Saeed and Nicolas, Walter and Faye , Ibrahima and Nordin, Nadira (2015) Reliability of bench-mark datasets for crowd analytic surveillance. In: 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).

Ahmad, Rana Fayyaz and Malik, Aamir Saeed and Kamel , Nidal and Reza, Faruque and Abdul Karim, Ahmad Helmy (2015) Optimization and development of concurrent EEG-fMRI data acquisition setup for understanding neural mechanisms of brain. In: 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Pisa.

Qayyum, Abdul and Malik, Aamir Saeed and Mohamad Saad, Mohamad Naufal and Iqbal, Mahboob and Abdullah, Mohd Faris and Rasheed, Waqas and Tuan Abdullah, Tuan Ab Rashid and Ramli, A Q (2015) Vegetation height estimation near power transmission poles via satellite stereo images using 3D depth estimation algorithms. In: 36th International Symposium on Remote Sensing of Environment, Berlin, Germany.

Mohammad Azam, Siti Fatimah and Drieberg , Micheal and Lai, Fong Woon (2015) Ant Colony Optimization of Feeder Bus Routes for Electric Train Service. In: IEEE Symposium on Computer Applications & Industrial Electronics (ISCAIE) 2015.

Shad, Muhammad Kashif and Lai, Fong Woon (2015) Developing an Enterprise Risk Management Value Enhancing Model Manifested through Economic Value Added. In: APPLIED COMPUTER and APPLIED COMPUTATIONAL SCIENCE (ACACOS '15), Malaysia.

Shahzad, Aamir and goh, CM and Mohamad Saad, Mohamad Naufal and Nicolas, Walter and Malik, Aamir Saeed and Meriaudeau, Fabrice (2015) Subcutaneous veins detection and backprojection method using Frangi vesselness filter. In: 2015 IEEE Symposium on Computer Applications & Industrial Electronics (ISCAIE).

Amin, Hafeez Ullah and Malik, Aamir Saeed and Badruddin , Nasreen and Kamel , Nidal and Hussain, Mohammad (2015) Effects of stereoscopic 3D display technology on event-related potentials (ERPs). In: 2015 7th International IEEE/EMBS Conference on Neural Engineering (NER).

Bamatraf, Saeed and Hussain, Mohammad and Aboalsamh, Hatim and Mathkour, Hassan and Malik, Aamir Saeed and Amin, Hafeez Ullah and Muhammad, Ghulam and Qazi, Emad-Ul-Haq (2015) A system based on 3D and 2D educational contents for true and false memory prediction using EEG signals. In: 2015 7th International IEEE/EMBS Conference on Neural Engineering (NER).

Rahman, Imran and Vasant, Pandian and Mahinder Singh, Balbir Singh and Abdullah-Al-Wadud, M. (2015) Hybrid Swarm Intelligence-Based Optimization for Charging Plug-in Hybrid Electric Vehicle. In: 7th Asian Conference, ACIIDS 2015, Bali, Indonesia., March 23-25, 2015, Bali, Indonesia..

Qayyum, Abdul and Malik, Aamir Saeed and Mohamad Saad, Mohamad Naufal and Ahmad, Rana Fayyaz and Taun Abdullah, Taun Ab Rashid (2015) Identification of power poles based on satellite stereo images using graph-cut algorithm. In: 2015 IEEE 11th International Colloquium on Signal Processing & Its Applications (CSPA).

Meng, Goh Chuan and Shahzad, Aamir and Mohamad Saad, Mohamad Naufal and Malik, Aamir Saeed and Meriaudeau, Fabrice (2015) Prototype design for wearable veins localization system using near infrared imaging technique. In: 2015 IEEE 11th International Colloquium on Signal Processing & Its Applications (CSPA).

Ahmad, Rana Fayyaz and Malik, Aamir Saeed and Qayyum, Abdul and Kamel, Nidal (2015) Disaster monitoring in urban and remote areas using satellite stereo images: A depth estimation approach. In: 2015 IEEE 11th International Colloquium on Signal Processing & Its Applications (CSPA).

Elaina, Nor Safira and Malik, Aamir Saeed and Badruddin , Nasreen and Abdullah, Jafri Malin and Reza, Faruque (2015) Somatosensory source localization for the magnetoencephalography (MEG) inverse problem in patients with brain tumor. In: 2015 2nd International Conference on Biomedical Engineering (ICoBE).

Rahman, Imran and Vasant, Pandian and Mahinder Singh, Balbir Singh and Abdullah-Al-Wadud, M. (2015) Swarm intelligence based State-of-Charge optimization for charging Plug-in Hybrid Electric Vehicles. In: 5th International Conference on Energy and Sustainability, 16 - 18 December, 2014, Putrajaya, Malaysia..

Jusoh, Norwahyu and Yeong, Yin Fong and Lau, Kok Keong and Azmi, Mohd Shariff (2015) Membranes for gas separation current development and challenges. In: Applied Mechanics and Materials.

Abdul Halim, Hairul Nazirah and Azmi, Mohd Shariff and Bustam, Mohammad Azmi (2015) Effect of liquid flow rate and amine concentration on CO2 removal from natural gas at high pressure operation in packed absorption column. In: Applied Mechanics and Materials.

Lai, Li Sze and Yeong, Yin Fong and Lau, Kok Keong and Azmi, Mohd Shariff (2015) Fast Synthesis of Highly Crystalline ZIF-8 Using Microwave-Assisted Solvothermal Method. In: Applied Mechanics and Materials.

See, Tan Lian and Horng, Tay Wee and Lau, Kok Keong and Azmi, Mohd Shariff (2015) Modelling of High Pressure, High Concentration Carbon Dioxide Capture in Absorption Column. In: Applied Mechanics and Materials.

Ban, Zhen Hong and Lau, Kok Keong and Azmi, Mohd Shariff (2015) Modelling of Bubble Growth in Supersaturated Solution using Computational Fluid Dynamics-Population Balance Model (CFD-PBM) Approach. In: Defect and Diffusion Forum.

Ullah, Sami and Azmi, Mohd Shariff and Nadeem, Muhammad and Bustam, Mohammad Azmi and Shahid, Shaukat Ali and Murshid, Ghulam and Naz, Muhammad Yasin and Sagir, Muhammad and Mushtaq, Muhammad (2015) Synergistic Effect of Thiourea and Surfactants on Corrosion Inhibition of Stainless Steel-410 in Presence of Sulfuric Acid. In: Applied Mechanics and Materials.

Shahid, Muhammad Zubair and Suleman, Humbul and Maulud, Adulhalim Shah and Khalil, Mohammad Azmi Bustam and Man, Zakaria (2015) Monitoring of Chemical Speciation of DEA--CO2--Water System by Raman Spectroscopy. In: Advanced Materials Research.

Suleman, Humbul and Shahid, Muhammad Zubair and Maulud, Abdulhalim Shah and Man, Zakaria and Khalil, Mohammad Azmi Bustam (2015) Determination of chemical species in MDEA--Carbon Dioxide--Water system by raman spectroscopy. In: Advanced Materials Research.

Hassan, M Fadzil and Abidin, Ahmad Izuddin B Zainal and Arshad, Noreen Izza Bt and Shariff, Azmi M and Yew, Kwang Hooi (2015) A generic ontology methodology and factors to address design consistency. In: 2015 5th International Conference on IT Convergence and Security (ICITCS).

Lock, SSM and Lau, KK and Tan, EK and Shariff, AM and Mei, Irene Lock Sow (2015) Application of microscopy technology in mathematical modeling of hollow fiber membrane system. In: AIP Conference Proceedings.

Hooi, Yew Kwang and Hassan, M Fadzil and Shariff, Azmi M (2015) Ontology evaluationâ��A criteria selection framework. In: 2015 International Symposium on Mathematical Sciences and Computing Research (iSMSC).

Mubashir, Muhammad and Yeong, Yin Fong and Keong, Lau Kok and bin Mohd Shariff, Azmi (2015) Methods comparison for the synthesis of deca-dodecasil 3 rhombohedral (DDR3) zeolite crystals. In: Applied mechanics and materials.

Hailegiorgis, Sintayehu Mekuria and Mahadzir, Shuhaimi and Subbarao, Duvvuri (2015) Reaction kinetics study for microwave energy pretreated Jatropha curcas L in-situ transesterification. In: ICGSCE 2014: Proceedings of the International Conference on Global Sustainability and Chemical Engineering.

Akbarzadeh, Omid and Zabidi, Noor Asmawati Mohd and Abdullah, Bawadi and Subbarao, Duvvuri (2015) Dispersion of Co/CNTs via strong electrostatic adsorption method: Thermal treatment effect. In: AIP Conference Proceedings.

Mei, Irene Lock Sow and Lock, SSM and Abdullah, Bawadi (2015) Application of microscopy technology in thermo-catalytic methane decomposition to hydrogen. In: AIP Conference Proceedings.

Akbarzadeh, Omid and Mohd Zabidi, Noor Asmawati and Abdullah, Bawadi and Subbarao, Duvvuri (2015) Synthesis of Co/CNTs Catalyst via Strong Electrostatic Adsorption: Effect of Calcination Condition. In: Advanced Materials Research.

Bashiri, Robabeh and Mohamed, Norani Muti and Kait, Chong Fai and Sufian, Suriati (2015) Effect of heat treatment on the physical properties of bimetallic doped catalyst, Cu-Ni/TiO2. In: AIP Conference Proceedings.

Khan, M Irfan and Azizli, Khairun and Sufian, Suriati and Man, Zakaria and Siyal, Ahmer Ali and Ullah, Hafeez (2015) Determination of anisotropy and multimorphology in fly ash based geopolymers. In: AIP Conference Proceedings.

Rao, TVVLN and Rani, AMA and Sufian, S and Mohamed, NM (2015) Analysis of CNT additives in porous layered thin film lubrication with electric double layer. In: AIP Conference Proceedings.

Bashiri, Robabeh and Mohamed, Norani Muti and Fai Kait, Chong and Sufian, Suriati (2015) Influence of hydrolysis rate on properties of nanosized TiO2 synthesized via sol-gel hydrothermal. In: Advanced Materials Research.

Mohamad Hashim, Ahmad Zulfadli and Sufian, SURIATI and Shima Shaharun, Maizatul (2015) Green functionalization of activated carbon for dye removal application. In: Applied Mechanics and Materials.

van Thien Duc, Nguyen and Sufian, Suriati and Mansor, Nurlidia and Yahya, Noorhana (2015) Effect of concentration and time factors on carbon nanofiber supported iron catalyst preparation by incipient wetness. In: Applied Mechanics and Materials.

Samsudin, Sity Juaeiriah and Mansor, Nurlidia and Sufian, Suriati and Man, Zakaria (2015) Thiosulfinates concentration in garlic extract at different storage temperatures. In: Applied Mechanics and Materials.

Khalil, Ibrahim and Aziz, A Rashid A and Yusuf, Suzana (2015) Effect of rubber seed oil and palm oil biodiesel diesel blends on diesel engine emission and combustion characteristics. In: Applied mechanics and materials.

Singh, KSM Jagindar and Elamvazuthi, I and Shaari, KZK and Lima, Fernando V (2015) PID tuning control strategy using Cuckoo Search algorithm. In: 2015 IEEE Student Conference on Research and Development (SCOReD).

Abdul Hadi, Siti Hajaratul Akma and Mukhtar, Hilmi and Abdul Mannan, Hafiz and Murugesan, Thanabalan (2015) Polyethersulfone/polyvinyl acetate blend membrane for CO2/CH4 gas separation. In: Applied Mechanics and Materials.

Nasir, Rizwan and Mukhtar, Hilmi and Shima Shaharun, Maizatul and Man, Zakaria (2015) Effect of carbon molecular sieve (CMS) concentration on mixed matrix membranes (MMMs) performance for carbon dioxide removal. In: Applied Mechanics and Materials.

Mannan, Hafiz Abdul and Mukhtar, Hilmi and Murugesan, Thanabalan (2015) Preparation and characterization of newly developed polysulfone/polyethersulfone blend membrane for CO2 separation. In: Applied Mechanics and Materials.

Jusoh, Norwahyu and Yeong, Yin Fong and Lau, Kok Keong and Azmi, Mohd Shariff (2015) Membranes for gas separation current development and challenges. In: Applied Mechanics and Materials.

Ban, Zhen Hong and Lau, Kok Keong and Azmi, Mohd Sharif (2015) Bubble Nucleation and Growth of Dissolved Gas in Solution Flowing Across a Cavitating Nozzle. In: Applied Mechanics and Materials.

Rostam, Omar and Dimin, Mohd Fairuz and Luqman, HH and Said, MR and Keong, Lau Kok and Norazlina, Mohamad Yatim and Norhidayah, M and Shaaban, Azizah and others (2015) Assessing the significance of rate and time pulse spraying in top spray granulation of urea fertilizer using Taguchi method. In: Applied Mechanics and Materials.

Kian Seng, Lee (2015) Autonomous Patrol and Surveillance System using Unmanned Aerial Vehicles. In: 15th IEEE International Conference on Environment and Electrical Engineering.

Mumtaz, Wajid and Malik, Aamir Saeed and Azhar Ali, Syed Saad and Mohd Yasin, Mohd Azhar and Amin, Hafeez Ullah (2015) Detrended fluctuation analysis for major depressive disorder. In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Lai, Fong woon and Micheal, Drieberg and Sophea, Ieng and Ammar Redza Ahmad Rizal, Redza Ahmad Rizal (2015) An Examination of Consumer Preferences and Socio-economic Factors on the Demand for Electric Train System in Malaysia. In: The 25th International Business Information Management Association Conference,, 7-8 May 2015, Amsterdam, Netherlands.

Shaheen, Ateeq-Ur-Rehman and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2015) Delay Design-for-Testability for Functional RTL Circuits. In: 7th International conference on Information Technology and Electrical Engineering (ICITEE 2015), 29-30th October 2015, Chiang Mai, Thailand.

Suman, Shipra and Hussin, Fawnizu Azmadi and Nicolas, Walter and Malik, Aamir Saeed and Goh, Khean Lee and Hilmi, Ida and Ho, Shaiw Hooi (2015) Optimum Colour Space Selection for Ulcerated Regions using Statistical Analysis and Classification of Ulcerated Frames from WCE Video Footage. In: 22nd International Conference on Neural Information Processing (ICONIP2015), November 9-12, 2015, Istanbul, Turkey.

Sheikh, Madiha and Zain Ali, Noohul Basheer and Hamid, Nor Hisham and Hussin, Fawnizu Azmadi and Shukla, Vineeta (2015) On Enhancing The Reliability of Digital Microfluidic Biochips (DMFB) Through Electrode Cells Health Classification. In: 2015 Asian Symposium on Quality Electronic Design (ASQED), 4-5 Augist 2015, Kuala Lumpur, Malaysia.

Marimuthu, Maran and Hassan, Rohail and Johl, S.K (2015) Demographic Diversity and Firm Value: A Review on Large Companies Using Panel Data Approach. In: 2nd International Symposium on Technology Management and Emerging Technologies (ISTMET2015), 25-27 August 2015, Langkawi Island, Kedah.

Marimuthu, Maran and Hassan, Rohail and Johl, S.K. (2015) Ethnic Diversity on Boards and Market Performance. In: International Conference on Business, Management, Tourism and Hospitality 2015 (BIZMATOUR 2015), 12-14 May 2015, Melaka.

Sumra, I.A. and Hasbullah, H.B. and Manan, J.-L.A. (2015) Using TPM to ensure security, trust and privacy (STP) in VANET. In: UNSPECIFIED.

Al-Nasheri, A. and Ali, Z. and Muhammad, G. and Alsulaiman, M. and Almalki, K.H. and Mesallam, T.A. and Farahat, M. (2015) Voice pathology detection with MDVP parameters using Arabic voice pathology database. In: UNSPECIFIED.

Yew, K.H. and Hassan, M.F. and Zainal Abidin, A.I.B. and Arshad, N.I.B. and Shariff, A.M. (2015) A generic ontology methodology and factors to address design consistency. In: UNSPECIFIED.

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2015) Towards an effective modelling and development of educational games with subject-matter: A multi-domain framework. In: UNSPECIFIED.

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2015) Understanding game play domain: An interpretive approach towards modelling educational games with multi-domain framework. In: UNSPECIFIED.

Rasheed, W. and Tang, T.B. and Bin Hamid, N.H. (2015) Default mode functional connectivity estimation and visualization framework for MEG data. In: UNSPECIFIED.

Mitra, M. and Kargupta, K. and Ganguly, S. and Banerjee, D. (2015) Improved photoluminescence property of CTAB assisted polyaniline-AlZnO nanocomposite. In: UNSPECIFIED.

Haruna, A.A. and Jung, L.T. and Zakaria, N. and Okitsu, J. (2015) Performance comparison of thermal aware job scheduling based on multi priorities on computational grid. In: UNSPECIFIED.

Amin, H.U. and Malik, A.S. and Badruddin, N. and Kamel, N. and Hussain, M. (2015) Effects of stereoscopic 3D display technology on event-related potentials (ERPs). In: UNSPECIFIED.

Al-Qutami, T.A.H. and Ibrahim, R. (2015) Design of a Fuzzy Logic process Controller for flow applications and implementation in series tanks Pilot Plant. In: UNSPECIFIED.

Elmahdy, A.E. and Yahya, N. and Kamel, N.S. and Shahid, A. (2015) Epileptic seizure detection using singular values and classical features of EEG signals. In: UNSPECIFIED.

Mansor, M.F.C. and Cheng, E.M. and Malek, M.F.A. and Beh, H.G. and Chik, A. and Khor, S.F. and Rojan, M.A. and Nasir, N.F.M. and Ong, S.A. and Bakar, S.A. (2015) Study on 10 GHz electromagnetic wave absorption of cullet doped with iron (II, III) oxide. In: UNSPECIFIED.

Rabih, A. and Dennis, J. and Khir, H. and Abdalrahman, M. and Ahmed, A. (2015) Modelling and Simulation of Polysilicon Piezoresistors in CMOS-MEMS Resonator for Biomarker Detection in Exhaled Breath. In: UNSPECIFIED.

Abubakar, M.Y. and Jung, L.T. and Foong, O.M. (2015) Two channel quantum security modelling focusing on quantum key distribution technique. In: UNSPECIFIED.

Dahalan, A.A. and Muthuvalu, M.S. and Sulaiman, J. (2015) Half-sweep successive over relaxation iterative method to solve two-point fuzzy boundary value problems. In: UNSPECIFIED.

Ismail, N. and Ismail, M.T. and Karim, S.A.A. and Hamzah, F.M. (2015) Modeling and forecasting the volatility of Islamic unit trust in Malaysia using GARCH model. In: UNSPECIFIED.

Elaina, N.S. and Malik, A. and Badruddin, N. and Abdullah, J.M. and Reza, M.F. (2015) Somatosensory source localization for the magnetoencephalography (MEG) inverse problem in patients with brain tumor. In: UNSPECIFIED.

Haider, N. and Imran, M. and Younis, M. and Saad, N. and Guizani, M. (2015) A novel mechanism for restoring actor connected coverage in wireless sensor and actor networks. In: UNSPECIFIED.

Almomani, M.A.T. and Basri, S. and Mahmood, A.K.B. and Bajeh, A.O. (2015) Software development practices and problems in Malaysian small and medium software enterprises: A pilot study. In: UNSPECIFIED.

Bamatraf, S. and Hussain, M. and Aboalsamh, H. and Mathkour, H. and Malik, A.S. and Amin, H.U. and Muhammad, G. and Qazi, E.-U.-H. (2015) A system based on 3D and 2D educational contents for true and false memory prediction using EEG signals. In: UNSPECIFIED.

Talpur, S. and Khahro, S.F. and Soomro, A.M. and Saand, A.S. (2015) Improving router efficiency in network on chip triplet-based hierarchical interconnection network with shared buffer design. In: UNSPECIFIED.

Qayyum, A. and Malik, A.S. and Saad, M.N.B.M. and Iqbal, M. (2015) Segmentation of satellite imagery based on pulse-coupled neural network. In: UNSPECIFIED.

Qayyum, A. and Malik, A.S. and Bin Muhammad Saad, M.N. (2015) Comparison of digital elevation models based on high resolution satellite stereo imagery. In: UNSPECIFIED.

Jamaludin, M.I. and Matori, A.N. and Myint, K.C. (2015) Application of NIR to determine effects of hydrocarbon microseepage in oil palm vegetation stress. In: UNSPECIFIED.

Latip, A.S.A. and Matori, A. and Aobpaet, A. and Din, A.H.M. (2015) Monitoring of offshore platform deformation with stanford method of Persistent Scatterer (StaMPS). In: UNSPECIFIED.

Hanif, M.F. and Ul Mustafa, M.R. and Hashim, A.M. and Yusof, K.W. (2015) Spatio-temporal change analysis of Perak river basin using remote sensing and GIS. In: UNSPECIFIED.

Kudiri, K.M. and Said, A.M. and Nayan, M.Y. (2015) Emotion Detection through Speech and Facial Expressions. In: UNSPECIFIED.

Chimeremeze, O.H. and Sulaiman, S. and Rambli, D.R.A. and Mean, F.O. (2015) Haptic exploratory interactions in foot reflexology practice from the practitioners' perspectives. In: UNSPECIFIED.

Din, W.I.S.W. and Yahya, S. and Taib, M.N. and Yassin, A.I.M. and Razali, R. (2015) The combinations of selected parameters to prolong the network lifetime for cluster head selection in wireless sensor network. In: UNSPECIFIED.

Rahim, M.H.B.A. and Zamin, N. (2015) AUTISTHERAPIBOT: Autonomous robotic autism therapists assistant for autistic children. In: UNSPECIFIED.

Marzuki, N.A. and Zarain, N. (2015) AEDESTROYER a proposed robotic solution to control dengue in Malaysia. In: UNSPECIFIED.

Shahzad, A. and Goh, C.M. and Saad, N.M. and Walter, N. and Malik, A.S. and Meriaudeau, F. (2015) Subcutaneous veins detection and backprojection method using Frangi vesselness filter. In: UNSPECIFIED.

Azam, S.F.M. and Drieberg, M. and Lai, F.-W. (2015) Ant Colony Optimization of feeder bus routes for electric train service. In: UNSPECIFIED.

Alhussian, H. and Zakaria, N. (2015) An efficient zero-laxity based real-time multiprocessor scheduling algorithm. In: UNSPECIFIED.

Ali, M. and Jung, L.T. (2015) Confidentiality based file attributes and data classification using TsF-KNN. In: UNSPECIFIED.

Sheikh, M.A. and Ali, N.B.Z. and Hamid, N.H. and Hussin, F.A. and Shukla, V. (2015) On enhancing the reliability of digital microfluidic biochips (DMFB) through electrode cells health classification. In: UNSPECIFIED.

Zazilah, M. and Mansor, A.F. and Yahaya, N.Z. (2015) Hep-2 cell images fluorescence intensity classification to determine positivity based on neural network. In: UNSPECIFIED.

Magzoub, M.A. and Saad, N.B. and Ibrahim, R.B. and Irfan, M. (2015) The effects of internal and external disturbances for the hybrid fuzzy-fuzzy controller applied to IM-drive. In: UNSPECIFIED.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Tuan Hung, N. (2015) Diagnosis of distributed faults in outer race of bearings via Park's transformation method. In: UNSPECIFIED.

Zulkifli, S.A. and Mohd, S. and Jamali, A.J. and Kurniawan, Y. and Saad, N. and Aziz, A.R.A. (2015) Implementation of energy management system for a split-parallel hybrid electric vehicle with in-wheel motors. In: UNSPECIFIED.

Rosli, N.S. and Ibrahim, R. and Ismail, I. (2015) Soft redundant instrument for metering station in gas transportation system. In: UNSPECIFIED.

Zulkifli, S.A. and Mohd, S. and Saad, N. and Aziz, A.R.A. (2015) Operation, power flow, system architecture and control challenges of split-parallel through-the-road hybrid electric vehicle. In: UNSPECIFIED.

Hung, N.T. and Ismail, I. and Saad, N.B. and Tufa, L. and Irfan, M. (2015) Design of optimal GBN sequences for identification of MIMO systems. In: UNSPECIFIED.

Chung, T.D. and Ibrahim, R.B. and Asirvadam, V.S. and Saad, N.B. and Hassan, S.M. (2015) Simulation of WirelessHART networked control system with packet dropout. In: UNSPECIFIED.

Ullah, B. and Ovinis, M. and Baharom, M.B. and Javaid, M.Y. and Izhar, S.S. (2015) Underwater gliders control strategies: A review. In: UNSPECIFIED.

Shamsuddin, N.M. and Yusup, S. and Ibrahim, W.A. and Bokhari, A. and Chuah, L.F. (2015) Oil extraction from Calophyllum inophyllum L. via Soxhlet extraction: Optimization using response surface methodology (RSM). In: UNSPECIFIED.

Jeoti, V. and Nawaz, F. (2015) Wireless RFID/sensor network using SAW (WiRSeNS): A feasibility study. In: UNSPECIFIED.

Habib, I. and Badruddin, N. and Drieberg, M. (2015) Delay-based load-balancing routing (DLBR) algorithm for wireless ad-hoc networks. In: UNSPECIFIED.

Mazlan, M.A.A.A. and Md Khir, M.H. and Mohamad Saad, M.N. (2015) Implementation of wireless sensor network in oil and gas specifically for personnel positioning application. In: UNSPECIFIED.

Nisar, K. and Hijazi, M.H.A. and Lawal, I.A. (2015) A new model of application response time for VoIP over WLAN and fixed WiMAX. In: UNSPECIFIED.

Zaman, N. and Low, T.J. and Alghamdi, T. (2015) Enhancing routing energy efficiency of Wireless Sensor Networks. In: UNSPECIFIED.

Qayyum, A. and Malik, A.S. and Saad, M.N.M. and Ahmad, R.F. and Abdullah, A.R.T. (2015) Identification of power poles based on satellite stereo images using graph-cut algorithm. In: UNSPECIFIED.

Ahmad, R.F. and Malik, A.S. and Qayyum, A. and Kamel, N. (2015) Disaster monitoring in urban and remote areas using satellite stereo images: A depth estimation approach. In: UNSPECIFIED.

Xiang, W.Y. and Sebastian, P. (2015) Handwriting recognition using webcam for data entry. In: UNSPECIFIED.

Zarif, S. and Faye, I. and Rambli, D.R.A. (2015) Video completion method for static object removal based on GLCM. In: UNSPECIFIED.

Altahir, A.A. and Asirvadam, V.S. and Hamid, N.H.B. and Sebastian, P. (2015) Secondary coverage configuration to support surveillance monitoring. In: UNSPECIFIED.

Meng, G.C. and Shahzad, A. and Saad, N.M. and Malik, A.S. and Meriaudeau, F. (2015) Prototype design for wearable veins localization system using near infrared imaging technique. In: UNSPECIFIED.

Borhan, A. and Thangamuthu, S. and Taha, M.F. and Ramdan, A.N. (2015) Development of activated carbon derived from banana peel for CO2 removal. In: UNSPECIFIED.

Hani, A.F.M. and Feng, Y.X. and Tang, T.B. and Kiguchi, M. (2015) Assessment of brain haemodynamic responses using optical topography modality. In: UNSPECIFIED.

Shahzad, A. and Tyng, C.M. and Saad, N.M. and Walter, N. and Malik, A.S. and Meriaudeau, F. (2015) Subcutaneous veins depth estimation method using Monte Carlo simulations. In: UNSPECIFIED.

Ahmad, R.F. and Malik, A.S. and Kamel, N. and Reza, F. and Abdul Karim, A.H. (2015) Optimization and development of concurrent EEG-fMRI data acquisition setup for understanding neural mechanisms of brain. In: UNSPECIFIED.

Hassan, M.A. and Malik, A.S. and Nicolas, W. and Faye, I. and Nordin, N. (2015) Reliability of bench-mark datasets for crowd analytic surveillance. In: UNSPECIFIED.

Shoaib, M. and Hisham, N. and Basheer, N. and Tariq, M. (2015) Frequency analysis of electrostatic cantilever-based MEMS sensor. In: UNSPECIFIED.

Sulaiman, S.A. and Mat, M.N.H. and Guangul, F.M. and Bou-Rabee, M.A. (2015) Real-time study on the effect of dust accumulation on performance of solar PV panels in Malaysia. In: UNSPECIFIED.

Sahmer, A.Z. and Mohamed, N.M. and Zaine, S.N.A. (2015) Effectiveness of dye sensitised solar cell under low light condition using wide band dye. In: UNSPECIFIED.

Mei, I.L.S. and Lock, S.S.M. and Abdullah, B. (2015) Application of microscopy technology in thermo-catalytic methane decomposition to hydrogen. In: UNSPECIFIED.

Okere, H.C. and Sulaiman, S. and Rambli, D.R.A. and Foong, O.-M. (2015) An exploratory study on the user experience of foot reflexology therapy using reflexology artifacts. In: UNSPECIFIED.

Mumtaz, A. and Mohamed, N.M. (2015) Nanoporous TiO 2 developed from two templates for their use in photovoltaic applications. In: UNSPECIFIED.

Ibrahim, N.N.M. and Hussain, P. and Awang, M. (2015) Morphology, topography, and hardness of diffusion bonded sialon to AISI 420 at different bonding time. In: UNSPECIFIED.

Lock, S.S.M. and Lau, K.K. and Tan, E.K. and Shariff, A.M. and Mei, I.L.S. (2015) Application of microscopy technology in mathematical modeling of hollow fiber membrane system. In: UNSPECIFIED.

Kareem, M.W. and Habib, K. and Sulaiman, S.A. (2015) Numerical and experimental investigation of direct solar crop dryer for farmers. In: UNSPECIFIED.

Asrul, M. and Othman, M. and Zakaria, M. (2015) Surface morphology changes of lignin filled natural rubber latex films investigated using AFM in relation to tensile strengths. In: UNSPECIFIED.

Abdullah, M.Z. and Ismail, S.S. (2015) Modifications of chemical functional groups of Pandanus amaryllifolius Roxb and its effect towards biosorption of heavy metals. In: UNSPECIFIED.

Siyal, A.A. and Azizli, K.A. and Ismail, L. and Man, Z. and Khan, M.I. (2015) Quantification of geopolymers production by chemical methods- A short review. In: UNSPECIFIED.

Ardakani, S.E.M. and Singh, B.S.M. and Mohammed, N.M. (2015) Improving the quality of graphene oxide prepared by Hummer's method by using centrifugation. In: UNSPECIFIED.

Amir, N. and Othman, W.M.S.W. and Ahmad, F. (2015) Fire resistance properties of ceramic wool fiber reinforced intumescent coatings. In: UNSPECIFIED.

Amir, A. and Mamat, O. (2015) Effects of sintering temperatures on microstructure and wear resistance of iron-silica composite. In: UNSPECIFIED.

Gholami, Z. and Abdullah, A.Z. and Gholami, F. and Vakili, M. (2015) Modified silica-based heterogeneous catalysts for etherification of glycerol. In: UNSPECIFIED.

Triwiyanto, A. and Hussain, P. and Priadi, D. and Ismail, M.C. (2015) Surface characteristics of low temperature hybrid thermochemical treatment of AISI 316L. In: UNSPECIFIED.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. (2015) Effect of process temperature on morphology of CNTs grown in a vertically fluidized bed reactor with Fe 2 O 3 /Al 2 O 3 catalyst. In: UNSPECIFIED.

Syafaat, T.A. and Ismail, M.C. (2015) Microbiologically influenced corrosion (MIC) of storage tank bottom plates. In: UNSPECIFIED.

Shafiq, N. and Fadhilnuruddin, M. and Elshekh, A.E.A. and Fathi, A. (2015) Correlation between compressive strength and ultrasonic pulse velocity of high strength concrete incorporating chopped basalt fibre. In: UNSPECIFIED.

Yin, Y.C. and Kait, C.F. and Fatimah, H. and Wilfred, C. (2015) Electron microscopy of Mg/TiO 2 photocatalyst morphology for deep desulfurization of diesel. In: UNSPECIFIED.

Pransisco, P. and Shafie, A. and Guan, B.H. (2015) Nanostructure investigation of magnetic nanomaterial Ni 0.5 Zn 0.3 Cu 0.2 Fe 2 O 4 synthesized by sol-gel method. In: UNSPECIFIED.

Hashim, N. and Mamat, O. (2015) Study on the influence of volume size of the milling jar in purifying Tronoh silica sand using ball milling process. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Rani, A.M.A. and Sufian, S. and Mohamed, N.M. (2015) Analysis of CNT additives in porous layered thin film lubrication with electric double layer. In: UNSPECIFIED.

Ahmad, F. and Aslam, M. and Altaf, K. and Shirazi, I. (2015) Effects of mold geometry on fiber orientation of powder injection molded metal matrix composites. In: UNSPECIFIED.

Khan, S.U. and Shafiq, N. and Ayub, T. (2015) Microstructure characteristics of concrete incorporating metakaolin and PVA fibers and influence on the compressive strength. In: UNSPECIFIED.

Shirazi, I. and Ahmad, F. and Raza, M.R. and Muhsan, A.S. and Aslam, M. (2015) Shear controlled alignment of short carbon fibers in copper matrix composite green samples produced by powder injection molding. In: UNSPECIFIED.

Khan, M.I. and Azizli, K. and Sufian, S. and Man, Z. and Siyal, A.A. and Ullah, H. (2015) Determination of anisotropy and multimorphology in fly ash based geopolymers. In: UNSPECIFIED.

Eskandar, A. and Mohamed, N.M. (2015) Microscopy of hierarchically organized TiO 2 photoelectrode for dye solar cells. In: UNSPECIFIED.

Balulla, S. and Padmanabhan, E. and Over, J. (2015) Comparative study of microfacies variation in two samples from the Chittenango member, Marcellus shale subgroup, western New York state, USA. In: UNSPECIFIED.

Yahya, E.A. and Zabidi, N.A.M. (2015) Effect of promoters on the morphology of Ni-based catalyst. In: UNSPECIFIED.

Akbarzadeh, O. and Zabidi, N.A.M. and Abdullah, B. and Subbarao, D. (2015) Dispersion of Co/CNTs via strong electrostatic adsorption method: Thermal treatment effect. In: UNSPECIFIED.

Tasfy, S.F.H. and Zabidi, N.A.M. and Shaharun, M.S. and Subbarao, D. (2015) The role of support morphology on the performance of Cu/ZnO-catalyst for hydrogenation of CO 2 to methanol. In: UNSPECIFIED.

Adil, M. and Zaid, H.M. and Chuan, L.K. and Alta'Ee, A.F. and Latiff, N.R.A. (2015) Microscopic evolution of dielectric nanoparticles at different calcination temperatures synthesized via sol-gel auto-combustion. In: UNSPECIFIED.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. (2015) Sauter mean diameter statistics of the starch dispersion atomized with hydraulic nozzle. In: UNSPECIFIED.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. (2015) Spatio-temporal droplet size statistics in developing spray of starchy solution. In: UNSPECIFIED.

Dasan, Y.K. and Bhat, A.H. and Faiz, A. (2015) Morphological and spectroscopic analysis of cellulose nanocrystals extracted from oil palm empty fruit bunch fiber. In: UNSPECIFIED.

Yusof, M.A.M. and Hanafi, N.H. (2015) Vital roles of nano silica in synthetic based mud for high temperature drilling operation. In: UNSPECIFIED.

Mian, M.U. and Dennis, J.O. and Md. Khir, M.H. and Riaz, K. and Iqbal, A. and Bazaz, S.A. and Tang, T.B. (2015) MEMS 3-DoF gyroscope design, modeling and simulation through equivalent circuit lumped parameter model. In: UNSPECIFIED.

Arogundade, A.I. and Megat-Yusoff, P.S.M. and Bhat, A.H. and Faiz, A. (2015) Characterization of red mud-epoxy intumescent char using surface imaging and micro analysis. In: UNSPECIFIED.

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. (2015) Effect of heat treatment on the physical properties of bimetallic doped catalyst, Cu-Ni/TiO 2. In: UNSPECIFIED.

Zia-ul-Mustafa, M. and Ahmad, F. and Megat-Yusoff, P.S.M. and Aziz, H. (2015) Synergistic effects of mica and wollastonite fillers on thermal performance of intumescent fire retardant coating. In: UNSPECIFIED.

Ahmad, F. and Ullah, S. and Aziz, H. and Omar, N.S. (2015) Thermal performance of glass fiber reinforced intumescent fire retardant coating for structural applications. In: UNSPECIFIED.

Aziz, H. and Ahmad, F. and Yusoff, P.S.M.M. and Zia-ul-Mustafa, M. (2015) Fire performance, microstructure and thermal degradation of an epoxy based nano intumescent fire retardant coating for structural applications. In: UNSPECIFIED.

Ezechi, E.H. and Kutty, S.R.B.M. and Malakahmad, A. and Isa, M.H. and Aminu, N. and Salihi, I.U. (2015) Removal of methylene blue from dye effluent using ageratum conyzoide leaf powder (ACLP). In: UNSPECIFIED.

Ezechi, E.H. and Kutty, S.R.B.M. and Malakahmad, A. and Salihi, I.U. and Aminu, N. (2015) Determination of optimum range for hexavalent chromium Cr(VI) removal using ageratum conyzoide leaf powder (ACLP). In: UNSPECIFIED.

Irshad, M.I. and Ahmad, F. and Mohamed, N.M. and Abdullah, M.Z. and Yar, A. (2015) Microscopic and magnetic properties of template assisted electrodeposited iron nanowires. In: UNSPECIFIED.

Lee, K.S. and Ovinis, M. and Nagarajan, T. and Seulin, R. and Morel, O. (2015) Autonomous patrol and surveillance system using unmanned aerial vehicles. In: UNSPECIFIED.

Ibrahim, O. and Yahaya, N.Z. and Saad, N. (2015) Single phase inverter with wide-input voltage range for solar photovoltaic application. In: UNSPECIFIED.

Zulkifli, S.A. and Mohd, S. and Saad, N. and Aziz, A.R.A. (2015) Split-parallel through-the-road hybrid electric vehicle: Operation, power flow and control modes. In: UNSPECIFIED.

Sovuthy, C. and Wen, W.P. (2015) Compact, quasi-elliptic dual-band bandpass filter with improved isolation. In: UNSPECIFIED.

Hussein, A.A.E. and Shafiq, N. and Nuruddin, M.F. (2015) Compressive strength and interfacial transition zone of sugar cane bagasse ash concrete: A comparison to the established pozzolans. In: UNSPECIFIED.

Munir, S. and Heikal, M.R. and Aziz, A.R.A. and Muthuvalu, M.S. and Siddiqui, M.I. (2015) Temporal and spatial characterization of turbulent structures in liquid phase using POD technique. In: UNSPECIFIED.

Karim, S.A.A. (2015) Positivity preserving by using rational cubic ball function. In: UNSPECIFIED.

Rehman, S. and Ali, S.S.A. (2015) Wind farm layout design using modified particle swarm optimization algorithm. In: UNSPECIFIED.

Krishnan, V. and Uemura, Y. and Thanh, N.T. and Khalid, N.A. and Osman, N. and Mansor, N. (2015) Three types of Marine microalgae and Nannocholoropsis oculata cultivation for potential source of biomass production. In: UNSPECIFIED.

Mazlan, M.A.F. and Uemura, Y. and Osman, N.B. and Yusup, S. (2015) Characterizations of bio-char from fast pyrolysis of Meranti wood sawdust. In: UNSPECIFIED.

Sabir, O. and Ya, T.M.Y.S.T. (2015) Numerical simulation of fluid flow in three dimensional domain based on two stage pressure-velocity correction method. In: UNSPECIFIED.

Teo, W. and Hing, K.L.M. (2015) An experimental investigation into the shear interaction between internal stirrups and external CFRP systems of RC beams. In: UNSPECIFIED.

Trinh, T.H. and KuShaari, K. (2015) Modeling base to design controlled release fertilizer matching with nitrogen uptake of rice plant. In: UNSPECIFIED.

Roslan, N.S. and Izhar, L.I. and Saad, M.N.M. and Sivapalan, S. (2015) Innovations for teaching and learning: An exploration of the potential of EEG for individual and group learning activities. In: UNSPECIFIED.

Singh, K.S.M.J. and Elamvazuthi, I. and Shaari, K.Z.K. and Lima, F.V. (2015) PID tuning control strategy using Cuckoo Search algorithm. In: UNSPECIFIED.

Ullah, R. and Jaafar, J. and Said, A.B.M. (2015) Semantic Annotation Model for objects Classification. In: UNSPECIFIED.

Shaheen, A.-U.-R. and Hussin, F.A. and Hamid, N.H. (2015) Delay design-for-testability for functional RTL circuits. In: UNSPECIFIED.

Awais, M. and Walter, N. and Faye, I. and Saad, M.N. and Ramanathan, A. and Zain, R.M. (2015) Analysis of auto-fluorescence images for automatic detection of abnormalities in oral cavity. In: UNSPECIFIED.

Jamali, A.A. and Nor, N.M. and Ibrahim, T. (2015) Energy storage systems and their sizing techniques in power system - A review. In: UNSPECIFIED.

Memon, A.H. and Bin Ibrahim, T. and Nallagowden, P. (2015) Design optimization of linear permanent magnet generator for wave energy conversion. In: UNSPECIFIED.

Ali, J.S.M. and Kannan, R. and Romlie, M.F. (2015) New cascaded multilevel converter topology based on basic unit with reduction of DC sources. In: UNSPECIFIED.

Musa, M.S. and Nallagownden, P. and Chiu, K.W. and Sarwar, M.B. (2015) Design and development of intelligent adaptive tunnel lighting system. In: UNSPECIFIED.

Sarwar, M.B. and Nallagownden, P. and Baharudin, Z. and Muthuvalu, M.S. (2015) Simulation and development of ZigBee based wireless stakeout system controlled by PC. In: UNSPECIFIED.

Nor, N.I.M. and Romlie, M.F. and Kannan, R. (2015) Comparison of tubular and planar design of a micro linear generator for vibration energy harvesting. In: UNSPECIFIED.

Mahesh, K. and Al Nallagownden, P. and Al Elamvazuthi, I. (2015) Optimal placement and sizing of DG in distribution system using accelerated PSO for power loss minimization. In: UNSPECIFIED.

Ibrahim, O. and Yahaya, N.Z. and Saad, N. and Umar, M.W. (2015) Matlab/Simulink model of solar PV array with perturb and observe MPPT for maximising PV array efficiency. In: UNSPECIFIED.

Sugumaran, M. and Suppiah, R.R. (2015) Study on the effect of silica fume with low calcium geopolymer properties for oil well cementing. In: UNSPECIFIED.

Ofei, T.N. and Alhemyari, S.A. (2015) Computational fluid dynamics simulation of the effect of drill pipe rotation on cuttings transport in horizontal wellbores using a Newtonian fluid. In: UNSPECIFIED.

Esmaeili, A. and Ayoub, M.A. (2015) Local thermal effect on vapor extraction (VAPEX) for heavy oil enhanced recovery. In: UNSPECIFIED.

Mohammed, B.S. and Ahmed Nezri, A.N.S.B. (2015) Durability aspects and bond strength of rubbercrete containing nano silica. In: UNSPECIFIED.

Woldemichael, D.E. and Abdul Rani, A.M. and Lemma, T.A. and Altaf, K. (2015) Numerical simulation of rock cutting using 2D AUTODYN. In: UNSPECIFIED.

Osei, H. and Al-Kayiem, H.H. and Hashim, F.M. (2015) Numerical studies on the separation performance of liquid-liquid hydrocyclone for higher water-cut wells. In: UNSPECIFIED.

Nor, M.A.M. and Al-Kayiem, H.H. and Lemma, T.A. (2015) Numerical analysis of cocurrent conical and cylindrical axial cyclone separators. In: UNSPECIFIED.

Mohd, M.S. and Karsiti, M.N. and Mohd, M.S. (2015) Effect of phase advance on the brushless dc motor torque speed respond. In: UNSPECIFIED.

Fudzin, A.F. and Majid, M.A.A. (2015) Reliability and availability analysis for robot subsystem in automotive assembly plant: A case study. In: UNSPECIFIED.

Bhayo, B.A. and Al-Kayiem, H.H. and Yahaya, N.Z. (2015) Performance investigation of the S-rotors. In: UNSPECIFIED.

Abdul-Wahhab, H.A. and Aziz, A.R.A. and Al-Kayiem, H.H. and Nasif, M.S. (2015) Modeling of diesel/CNG mixing in a pre-injection chamber. In: UNSPECIFIED.

Habib, K. (2015) Performance investigation of a waste heat driven pressurized adsorption refrigeration cycle. In: UNSPECIFIED.

Mahgoub, B.K.M. and Sulaiman, S.A. and A Karim, Z.A. and Hagos, F.Y. (2015) Experimental study on the effect of varying syngas composition on the emissions of dual fuel CI engine operating at various engine speeds. In: UNSPECIFIED.

Jamil, I.E. and Al-Kayiem, H.H. (2015) Simulation analysis of the oil/water structure in the downhole with presence of hydrocyclone separator. In: UNSPECIFIED.

Soh, B.P. and Pao, W. and Al-Kayiem, H.H. (2015) Numerical analyses for improved hydrodynamics of deep water torpedo anchor. In: UNSPECIFIED.

Irawan, S. and Bharadwaj, A.M. and Temesgen, B. and Karuppanan, S. and Abdullah, M.Z.B. (2015) Effect of wear on the burst strength of l-80 steel casing. In: UNSPECIFIED.

Al-Kayiem, A.H.H. and Ibrahim, M.A. (2015) The influence of the equivalent hydraulic diameter on the pressure drop prediction of annular test section. In: UNSPECIFIED.

Firmansyah, F. and Ayandotun, W.B. and Zainal, E.Z. and Aziz, A.A.R.A. and Heika, M.R. (2015) Performance of CO2 enrich CNG in direct injection engine. In: UNSPECIFIED.

Firmansyah and Aziz, A.R.A. and Heikal, M.R. (2015) The combustion behavior of diesel/CNG mixtures in a constant volume combustion chamber. In: UNSPECIFIED.

Zulkifli, S.A. and Syaifuddin Mohd, M. and Maharun, M. and Bakar, N.S.A. and Idris, S. and Samsudin, S.H. and Firmansyah, F. and Adz, J.J. and Misbahulmunir, M. and Abidin, E.Z.Z. and Syafiq Mohd, M. and Saad, N. and Aziz, A.R.A. (2015) Design and development of split-parallel through-the road retrofit hybrid electric vehicle with in-wheel motors. In: UNSPECIFIED.

Syaifuddin Mohd, M. and Rashid, A. and Syafiq Mohd, M. (2015) Investigation of mechanical field weakening of axial flux permanent magnet motor. In: UNSPECIFIED.

Karajeh, A.I. and Ibrahim, M.Y.B. and Lode, N.A.B. (2015) Impact of voluntary disclosure on earnings management in Malaysian companies: A proposed analysis. In: UNSPECIFIED.

Al-Arabiat, D. and Wan Ahmad, W.F. and Sarlan, A. (2015) Review on critical factors of adopting cloud mobile learning. In: UNSPECIFIED.

Ghazali, Z. and Zahid, M. (2015) Environmental sustainability: Carbon emission reduction strategies and reporting among Malaysian construction companies. In: UNSPECIFIED.

Rubab, S. and Hassan, M.F. and Mahmood, A.K. and Shah, S.N.M. (2015) Forecasting volunteer grid workload using Holt-Winters' method. In: UNSPECIFIED.

Bano, S. and Ting, D.H. (2015) Digital era generation: Zhai Nan and Zhai Nv blessing or curse. In: UNSPECIFIED.

Serai, M.H. and Johl, S.K. and Marimuthu, M. (2015) Conceptual framework of sustainable corporate entrepreneurship. In: UNSPECIFIED.

Makki, B.I. and Salleh, R. and Harun, H. (2015) Work readiness, career self-efficacy and career exploration: A correlation analysis. In: UNSPECIFIED.

Shamim, A. and Ghazali, Z. and Abdul Jamak, A.B.S. (2015) Extrinsic experiential value as an antecedent of customer citizenship behavior. In: UNSPECIFIED.

Amin, A. and Rehman, M. and Basri, S. and Hassan, M.F. (2015) A proposed conceptual framework of programmer's creativity. In: UNSPECIFIED.

Javaid, M.U. and Ghazali, Z. and Binsha, A.S.N. and Langove, N. (2015) Psychosocial risks: Health and wellbeing of workers in petrochemical industry of Malaysia. In: UNSPECIFIED.

Hassan, R. and Marimuthu, M. and Johl, S.K. (2015) Demographic diversity and firm value: A review on large companies using panel data approach. In: UNSPECIFIED.

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2015) Modelling educational games through multi-domain framework in light of game play. In: UNSPECIFIED.

Khan, M.A. and Ibrahim, M.Y. (2015) Corporate governance mechanism constraining Earning Management in Malaysian listed companies. In: UNSPECIFIED.

Ahmed, S. and Ting, D.H. and Johl, S.K. and Abdul Jamak, A.B.S.B. (2015) Game changing strategies for retailers: How to create utilitarian offers for shoppers. In: UNSPECIFIED.

Abdul Jamak, A.B.S. and Shamim, A. and Ghazali, Z. (2015) Impact of customer citizenship behavior on corporate brand experience. In: UNSPECIFIED.

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2015) An interpretive approach to model educational games: Learning theories domain using multi-domain framework. In: UNSPECIFIED.

Alaloul, W.S. and Liew, M.S. and Wan Abdullah Zawawi, N.A. (2015) The characteristics of coordination process in construction projects. In: UNSPECIFIED.

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2015) A multi-domain framework: A qualitative study evolving understanding of subject-matter in modelling educational games. In: UNSPECIFIED.

Sohail, A. and Dominic, P.D.D. (2015) Business process improvement: A process warehouse based resource management method. In: UNSPECIFIED.

Rahman, H.U. and Ibrahim, M.Y. and Ahmad, A.C. (2015) The impact of soft regulations on boardroom diversity and shareholders' confidence in Malaysia. In: UNSPECIFIED.

Ali, W. and Abdullah, A. (2015) The long-run relationship between economic growth, financial development, trade openness and CO2 emissions in Malaysia. In: UNSPECIFIED.

Hasni, M.M. and Majid, Z.A. and Senu, N. (2015) Direct 4-point 1-step block method for solving Dirichlet boundary value problem. In: UNSPECIFIED.

Rahman, Z.H.A. and Khir, M.H.Md. and Burhanudin, Z.A. (2015) CMOS-MEMS thermoelectric generator for low power medical devices. In: UNSPECIFIED.

Rabih, A.A.S. and Khir, M.H.M. and Ahmed, A.Y. and Ahmed, M.G.A. and Dennis, J.O. (2015) Characterization of CMOS-MEMS device for acetone vapor detection in exhaled breath. In: UNSPECIFIED.

Gafare, M. and Khir, M.H.M. and Rabih, A. and Ahmed, A. and Dennis, J.O. (2015) Modeling and simulation of polysilicon piezoresistors in a CMOS-MEMS resonator for mass detection. In: UNSPECIFIED.

Ali, I. and Khir, M.H.M. and Baharudin, Z. and Ashraf, K. (2015) CMOS-MEMS multiple resonant vibration energy harvester for wireless sensor network. In: UNSPECIFIED.

Khalid, S. and Ali, S.Q. (2015) Design of highly selective ultra-wideband (UWB) bandpass filter using step impedance resonator and parallel coupled lines. In: UNSPECIFIED.

Hasan, M.K. and Karim, S.A.A. and Sulaiman, J. (2015) Graphical analysis of Rosenzweig-MacArthur model via adams-moultan and fourth order Runge-Kutta methods. In: UNSPECIFIED.

Chuan, N.K. and Sivaji, A. and Ahmad, W.F.W. (2015) Proposed Usability Heuristics for Testing Gestural Interaction. In: UNSPECIFIED.

Abbasi, A.Z. and Ting, D.H. and Jamek, A.B.S.A. (2015) An integrated conceptual model for predicting behavioral learning triggered by video-game engagement: A mediating role of observational learning. In: UNSPECIFIED.

Sutri, N.Y. and Dennis, J.O. and Khir, M.H.Md. and Mian, M.U. (2015) Noise minimization techniques for modulator demodulator circuits used for chopper stabilization in CMOS-MEMS sensor applications. In: UNSPECIFIED.

Sutri, N.Y. and Dennis, J.O. and Khir, M.H.M. and Ahmed, A.Y. and Mian, M.U. (2015) A monolithic, low-noise, capacitive readout interface circuit for CMOS-MEMS resonator-based gravimetric chemical gas sensors. In: UNSPECIFIED.

Mohammed, B.S. and Ibrahim, R.B. (2015) Convertible active power filter: A new approach to compensate for current quality problems in the DS. In: UNSPECIFIED.

Bayuaji, R. and Biyanto, T.R. and Irawan, S. (2015) Design of cement plant waste heat recovery generation. In: UNSPECIFIED.

Almahasneh, H. and Kamel, N. and Walter, N. and Malik, A.S. (2015) R-principal subspace for driver cognitive state classification. In: UNSPECIFIED.

Candra, H. and Yuwono, M. and Chai, R. and Handojoseno, A. and Elamvazuthi, I. and Nguyen, H.T. and Su, S. (2015) Investigation of window size in classification of EEG-emotion signal with wavelet entropy and support vector machine. In: UNSPECIFIED.

Khan, J. and Malik, A.S. and Kamel, N. and Dass, S.C. and Affandi, A.M. (2015) Segmentation of acne lesion using fuzzy C-means technique with intelligent selection of the desired cluster. In: UNSPECIFIED.

Hyder, R. and Kamel, N. and Boon, T.T. and Reza, F. (2015) Mapping of language brain areas in patients with brain tumors. In: UNSPECIFIED.

Subhani, A.R. and Malik, A.S. and Kamel, N. and Saad, N. and Nandagopal, D.N. (2015) Experimental evidence for the effects of the Demand-Control model on the cognitive arousal: An EEG based study. In: UNSPECIFIED.

Ahmad, R.F. and Malik, A.S. and Kamel, N. and Reza, F. (2015) Object categories specific brain activity classification with simultaneous EEG-fMRI. In: UNSPECIFIED.

Amin, H.U. and Malik, A.S. and Mumtaz, W. and Badruddin, N. and Kamel, N. (2015) Evaluation of passive polarized stereoscopic 3D display for visual & mental fatigues. In: UNSPECIFIED.

Mumtaz, W. and Malik, A.S. and Ali, S.S.A. and Yasin, M.A.M. and Amin, H. (2015) Detrended fluctuation analysis for major depressive disorder. In: UNSPECIFIED.

Azam, S.F.M. and Drieberg, M. and Lai, F.-W. (2015) Ant Colony Optimization of feeder bus routes for electric train service. In: UNSPECIFIED.

Rahim, M.H.B.A. and Zamin, N. (2015) AUTISTHERAPIBOT: Autonomous robotic autism therapists assistant for autistic children. In: UNSPECIFIED.

Marzuki, N.A. and Zarain, N. (2015) AEDESTROYER a proposed robotic solution to control dengue in Malaysia. In: UNSPECIFIED.

Qayyum, A. and Malik, A.S. and Saad, M.N.B.M. and Iqbal, M. (2015) Segmentation of satellite imagery based on pulse-coupled neural network. In: UNSPECIFIED.

Qayyum, A. and Malik, A.S. and Bin Muhammad Saad, M.N. (2015) Comparison of digital elevation models based on high resolution satellite stereo imagery. In: UNSPECIFIED.

Jamaludin, M.I. and Matori, A.N. and Myint, K.C. (2015) Application of NIR to determine effects of hydrocarbon microseepage in oil palm vegetation stress. In: UNSPECIFIED.

Latip, A.S.A. and Matori, A. and Aobpaet, A. and Din, A.H.M. (2015) Monitoring of offshore platform deformation with stanford method of Persistent Scatterer (StaMPS). In: UNSPECIFIED.

Hanif, M.F. and Ul Mustafa, M.R. and Hashim, A.M. and Yusof, K.W. (2015) Spatio-temporal change analysis of Perak river basin using remote sensing and GIS. In: UNSPECIFIED.

Haider, N. and Imran, M. and Younis, M. and Saad, N. and Guizani, M. (2015) A novel mechanism for restoring actor connected coverage in wireless sensor and actor networks. In: UNSPECIFIED.

Magzoub, M.A. and Saad, N.B. and Ibrahim, R.B. and Irfan, M. (2015) The effects of internal and external disturbances for the hybrid fuzzy-fuzzy controller applied to IM-drive. In: UNSPECIFIED.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Tuan Hung, N. (2015) Diagnosis of distributed faults in outer race of bearings via Park's transformation method. In: UNSPECIFIED.

Rosli, N.S. and Ibrahim, R. and Ismail, I. (2015) Soft redundant instrument for metering station in gas transportation system. In: UNSPECIFIED.

Hung, N.T. and Ismail, I. and Saad, N.B. and Tufa, L. and Irfan, M. (2015) Design of optimal GBN sequences for identification of MIMO systems. In: UNSPECIFIED.

Chung, T.D. and Ibrahim, R.B. and Asirvadam, V.S. and Saad, N.B. and Hassan, S.M. (2015) Simulation of WirelessHART networked control system with packet dropout. In: UNSPECIFIED.

Ullah, B. and Ovinis, M. and Baharom, M.B. and Javaid, M.Y. and Izhar, S.S. (2015) Underwater gliders control strategies: A review. In: UNSPECIFIED.

Hani, A.F.M. and Feng, Y.X. and Tang, T.B. and Kiguchi, M. (2015) Assessment of brain haemodynamic responses using optical topography modality. In: UNSPECIFIED.

Zaman, N. and Low, T.J. and Alghamdi, T. (2015) Enhancing routing energy efficiency of Wireless Sensor Networks. In: UNSPECIFIED.

Jeoti, V. and Nawaz, F. (2015) Wireless RFID/sensor network using SAW (WiRSeNS): A feasibility study. In: UNSPECIFIED.

Zulkifli, S.A. and Mohd, S. and Saad, N. and Aziz, A.R.A. (2015) Split-parallel through-the-road hybrid electric vehicle: Operation, power flow and control modes. In: UNSPECIFIED.

Shoaib, M. and Hisham, N. and Basheer, N. and Tariq, M. (2015) Frequency analysis of electrostatic cantilever-based MEMS sensor. In: UNSPECIFIED.

Abbasi, U.F. and Awang, A. and Hamid, N.H. (2015) A Cross-Layer Opportunistic MAC/routing Protocol to improve reliability in WBAN. In: UNSPECIFIED.

Faye, I. (2015) Students' perception in the use of self-made YouTube videos in teaching Mathematics. In: UNSPECIFIED.

Taha Jilani, M. and Wong, P.W. and Zakariya, M.A. and Lee, Y.C. (2015) Dielectric characterization of meat using enhanced coupled ring-resonator. In: UNSPECIFIED.

Rauf, M. and Yahya, N. and Nyamasvisva, T.E. and Ansari, A. and Shafie, A. and Nahar, N. (2015) Prediction of double stacking hydrocarbon using Marine Controlled Source Electromagnetic method. In: UNSPECIFIED.

Abdul Hadi, M.H. and Shairi, N.A. and Ahmad, B.H. and Wong, P.W. (2015) Isolation improvement of discrete PIN diode switch using square dumbbell Defected Ground Structure. In: UNSPECIFIED.

Khan, W.Z. and Saad, N.M. and Aalsalem, M.Y. and Xaing, Y. (2015) Detecting clones in wireless sensor networks using Single Stage Memory Random Walk with Network Division. In: UNSPECIFIED.

Jilani, M.T. and Wen, W.P. and Zakariya, M.A. and Cheong, L.Y. and Ur Rehman, M.Z. (2015) An improved design of microwave biosensor for measurement of tissues moisture. In: UNSPECIFIED.

Awais, M. and Badruddin, N. and Drieberg, M. (2015) A non-invasive approach to detect drowsiness in a monotonous driving environment. In: UNSPECIFIED.

Chughtai, O. and Badruddin, N. and Awang, A. (2015) A congestion-aware and energy efficient traffic Load balancing Scheme for routing in WSNs. In: UNSPECIFIED.

Chughtai, O. and Badruddin, N. and Awang, A. (2015) Distributed on-demand multi-optional routing protocol in multi-hop wireless networks. In: UNSPECIFIED.

Nguyen, T.H. and Ismail, I. and Saad, N.B. and Faisal, A. and Irfan, M. (2015) A practical approach of control of real time nonlinear process plant using Multiple Model Predictive Control. In: UNSPECIFIED.

Baig, M.Z. and Javed, E. and Ayaz, Y. and Afzal, W. and Gillani, S.O. and Naveed, M. and Jamil, M. (2015) Classification of left/right hand movement from EEG signal by intelligent algorithms. In: UNSPECIFIED.

Soon, J.N.P. and Wan, W.S. and Yuen, P.K. and Heng, L.E. and Theam, L.J. and Wei, L.S. (2015) BareBone cloud IaaS: Revitalization disruptive technology. In: UNSPECIFIED.

Sabir, O. and Ya, T.M.Y.S.T. (2015) Numerical simulation of fluid flow in three dimensional domain based on two stage pressure-velocity correction method. In: UNSPECIFIED.

Teo, W. and Hing, K.L.M. (2015) An experimental investigation into the shear interaction between internal stirrups and external CFRP systems of RC beams. In: UNSPECIFIED.

Trinh, T.H. and KuShaari, K. (2015) Modeling base to design controlled release fertilizer matching with nitrogen uptake of rice plant. In: UNSPECIFIED.

Singh, K.S.M.J. and Elamvazuthi, I. and Shaari, K.Z.K. and Lima, F.V. (2015) PID tuning control strategy using Cuckoo Search algorithm. In: UNSPECIFIED.

Ullah, R. and Jaafar, J. and Said, A.B.M. (2015) Semantic Annotation Model for objects Classification. In: UNSPECIFIED.

Shaheen, A.-U.-R. and Hussin, F.A. and Hamid, N.H. (2015) Delay design-for-testability for functional RTL circuits. In: UNSPECIFIED.

Jamali, A.A. and Nor, N.M. and Ibrahim, T. (2015) Energy storage systems and their sizing techniques in power system - A review. In: UNSPECIFIED.

Memon, A.H. and Bin Ibrahim, T. and Nallagowden, P. (2015) Design optimization of linear permanent magnet generator for wave energy conversion. In: UNSPECIFIED.

Ali, J.S.M. and Kannan, R. and Romlie, M.F. (2015) New cascaded multilevel converter topology based on basic unit with reduction of DC sources. In: UNSPECIFIED.

Musa, M.S. and Nallagownden, P. and Chiu, K.W. and Sarwar, M.B. (2015) Design and development of intelligent adaptive tunnel lighting system. In: UNSPECIFIED.

Sarwar, M.B. and Nallagownden, P. and Baharudin, Z. and Muthuvalu, M.S. (2015) Simulation and development of ZigBee based wireless stakeout system controlled by PC. In: UNSPECIFIED.

Nor, N.I.M. and Romlie, M.F. and Kannan, R. (2015) Comparison of tubular and planar design of a micro linear generator for vibration energy harvesting. In: UNSPECIFIED.

Mahesh, K. and Al Nallagownden, P. and Al Elamvazuthi, I. (2015) Optimal placement and sizing of DG in distribution system using accelerated PSO for power loss minimization. In: UNSPECIFIED.

Ibrahim, O. and Yahaya, N.Z. and Saad, N. and Umar, M.W. (2015) Matlab/Simulink model of solar PV array with perturb and observe MPPT for maximising PV array efficiency. In: UNSPECIFIED.

Sugumaran, M. and Suppiah, R.R. (2015) Study on the effect of silica fume with low calcium geopolymer properties for oil well cementing. In: UNSPECIFIED.

Esmaeili, A. and Ayoub, M.A. (2015) Local thermal effect on vapor extraction (VAPEX) for heavy oil enhanced recovery. In: UNSPECIFIED.

Mohammed, B.S. and Ahmed Nezri, A.N.S.B. (2015) Durability aspects and bond strength of rubbercrete containing nano silica. In: UNSPECIFIED.

Kareem, M.W. and Habib, K. and Ruslan, M.H. (2015) Numerical modelling of multi-pass solar dryer filled with granite pebbles for thermal storage enhancement. In: UNSPECIFIED.

Khanh, D.V.K. and Vasant, P.M. and Elamvazuthi, I. and Dieu, V.N. (2015) Geometric optimization of thermo-electric coolers using simulated annealing. In: UNSPECIFIED.

Habib, K. and Assadi, M.K. and Zainudin, M.H.B. (2015) Study of solar driven silica gel-water based adsorption chiller. In: UNSPECIFIED.

Teh, H.M. and Venugopal, V. (2015) Optimization of hydraulic efficiency of a free surface semicircular breakwater using wave screens. In: UNSPECIFIED.

Abdul-Kadir, N.A. and Mat Safri, N. and Othman, M.A. and Embong, A.M. (2015) Human heart oscillatory behavior during atrial fibrillation based on second order system. In: UNSPECIFIED.

Khan, A.H. and Javaid, N. and Imran, M. and Khan, Z.A. and Qasim, U. and Haider, N. (2015) DYN-NbC: A new routing scheme to maximize lifetime and throughput of WSNs. In: UNSPECIFIED.

Sovuthy, C. and Wen, W.P. (2015) Compact, quasi-elliptic dual-band bandpass filter with improved isolation. In: UNSPECIFIED.

Sulaiman, S.A. and Mat, M.N.H. and Guangul, F.M. and Bou-Rabee, M.A. (2015) Real-time study on the effect of dust accumulation on performance of solar PV panels in Malaysia. In: UNSPECIFIED.

Kurian, V.J. and Al-Yacouby, A.M. and Sebastian, A.A. and Liew, M.S. and Idichandy, V.G. (2015) Effect of sacrificial anodes and marine growth on hydrodynamic coefficients of rigid cylinders. In: UNSPECIFIED.

Habib, I. and Badruddin, N. and Drieberg, M. (2015) Delay-based load-balancing routing (DLBR) algorithm for wireless ad-hoc networks. In: UNSPECIFIED.

Mazlan, M.A.A.A. and Md Khir, M.H. and Mohamad Saad, M.N. (2015) Implementation of wireless sensor network in oil and gas specifically for personnel positioning application. In: UNSPECIFIED.

Lee, K.S. and Ovinis, M. and Nagarajan, T. and Seulin, R. and Morel, O. (2015) Autonomous patrol and surveillance system using unmanned aerial vehicles. In: UNSPECIFIED.

Ibrahim, O. and Yahaya, N.Z. and Saad, N. (2015) Single phase inverter with wide-input voltage range for solar photovoltaic application. In: UNSPECIFIED.

Kim, D.K. and Liew, M.S. and Yu, S.Y. and Park, K.S. and Choi, H.S. (2015) Method for estimating soft clay type seabed embedment by pipeline movement. In: UNSPECIFIED.

Abbas, T. and Nazir, S. and Mrugalska, B. and Mutalib, M. (2015) Mercury emissions, hazards and preventive measures: A review. In: UNSPECIFIED.

Al-Qutami, T.A.H. and Ibrahim, R. (2015) Design of a Fuzzy Logic process Controller for flow applications and implementation in series tanks Pilot Plant. In: UNSPECIFIED.

Rasheed, W. and Tang, T.B. and Bin Hamid, N.H. (2015) Default mode functional connectivity estimation and visualization framework for MEG data. In: UNSPECIFIED.

Amin, H.U. and Malik, A.S. and Badruddin, N. and Kamel, N. and Hussain, M. (2015) Effects of stereoscopic 3D display technology on event-related potentials (ERPs). In: UNSPECIFIED.

Baheta, A.T. and Hassan, S. and Reduan, A.R.B. and Woldeyohannes, A.D. (2015) Performance investigation of transcritical carbon dioxide refrigeration cycle. In: UNSPECIFIED.

Othman, M. and Yusnenti, F.M.Y. and Mohdyusri, I. (2015) Siliconizing process of mild steel substrate by using Tronoh Silica Sand (TSS): An experimental investigation. In: UNSPECIFIED.

Irshad, K. and Habib, K. and Thirumalaiswamy, N. (2015) Performance evaluation of PV-Trombe wall for sustainable building development. In: UNSPECIFIED.

Woldemichael, D.E. and Hashim, F.M. (2015) Web-based conceptual design support system. In: UNSPECIFIED.

Shahzad, A. and Tyng, C.M. and Saad, N.M. and Walter, N. and Malik, A.S. and Meriaudeau, F. (2015) Subcutaneous veins depth estimation method using Monte Carlo simulations. In: UNSPECIFIED.

Hassan, M.A. and Malik, A.S. and Nicolas, W. and Faye, I. and Nordin, N. (2015) Reliability of bench-mark datasets for crowd analytic surveillance. In: UNSPECIFIED.

Mohamad, N. and Kamaruddin, S. and Purwanto, U.S. (2015) The effects of organizational innovation on operational performance and other types of innovation. In: UNSPECIFIED.

Karia, N. and Asaari, M.H.A.H. and Mohamad, N. and Kamaruddin, S. (2015) Assessing Halal logistics competence: An Islamic-based and resource-based view. In: UNSPECIFIED.

Ziao, C.Z. and Kamaruddin, S. (2015) Numerical assessment on makespan minimization by adopting NEH heuristics in permutation flow shop. In: UNSPECIFIED.

Ofei, T.N. and Irawan, S. and Pao, W. (2015) Cuttings-liquid frictional pressure loss model for horizontal narrow annular flow with rotating drillpipe. In: UNSPECIFIED.

Al-Wakeel, H.B. and Karim, Z.A.A. and Al-Kayiem, H.H. (2015) Optimizing electro-thermo Helds for soot oxidation using microwave heating and metal. In: UNSPECIFIED.

Alkali, A.U. and Ginta, T.L. and Abdul-Rani, A.M. (2015) Experimental investigation and 3D finite element prediction of temperature distribution during travelling heat sourced from oxyacetylene flame. In: UNSPECIFIED.

Hassan, S. and Khosravi, A. and Jaafar, J. (2015) Training of interval type-2 fuzzy logic system using extreme learning machine for load forecasting. In: UNSPECIFIED.

Azahar, T.F. and Mahinderjit-Singh, M. and Hassan, R. (2015) RFID-enabled supply chain detection using clustering algorithms. In: UNSPECIFIED.

Zahari, A. and Jaafar, J. (2015) A novel approach of hidden markov model for time series forecasting. In: UNSPECIFIED.

Ahsanullah and Sulaiman, S. and Mahmood, A.K. and Khan, M. (2015) Investigation of fingertip contact area and shape for precise target selection on multi-touch screen. In: UNSPECIFIED.

Saini, S. and Rambli, D.R.B.A. and Sulaiman, S.B. and Zakaria, M.N.B. and Tomi, A.B. (2015) Particle swarm optimization based articulated human pose tracking using enhanced silhouette extraction. In: UNSPECIFIED.

Al-Qutami, T.A.H. and Ibrahim, R. (2015) Design of a Fuzzy Logic process Controller for flow applications and implementation in series tanks Pilot Plant. In: UNSPECIFIED.

Ariffin, K.A.Z. and Jaafar, J. and Mahmood, A.K. and Shamsuddin, S. (2015) Tracking file's metadata from computer memory analysis. In: UNSPECIFIED.

Woldemichael, D.E. and Abdul Rani, A.M. and Lemma, T.A. and Altaf, K. (2015) Numerical simulation of rock cutting using 2D AUTODYN. In: UNSPECIFIED.

Osei, H. and Al-Kayiem, H.H. and Hashim, F.M. (2015) Numerical studies on the separation performance of liquid-liquid hydrocyclone for higher water-cut wells. In: UNSPECIFIED.

Nor, M.A.M. and Al-Kayiem, H.H. and Lemma, T.A. (2015) Numerical analysis of cocurrent conical and cylindrical axial cyclone separators. In: UNSPECIFIED.

Mohd, M.S. and Karsiti, M.N. and Mohd, M.S. (2015) Effect of phase advance on the brushless dc motor torque speed respond. In: UNSPECIFIED.

Fudzin, A.F. and Majid, M.A.A. (2015) Reliability and availability analysis for robot subsystem in automotive assembly plant: A case study. In: UNSPECIFIED.

Bhayo, B.A. and Al-Kayiem, H.H. and Yahaya, N.Z. (2015) Performance investigation of the S-rotors. In: UNSPECIFIED.

Abdul-Wahhab, H.A. and Aziz, A.R.A. and Al-Kayiem, H.H. and Nasif, M.S. (2015) Modeling of diesel/CNG mixing in a pre-injection chamber. In: UNSPECIFIED.

Habib, K. (2015) Performance investigation of a waste heat driven pressurized adsorption refrigeration cycle. In: UNSPECIFIED.

Jamil, I.E. and Al-Kayiem, H.H. (2015) Simulation analysis of the oil/water structure in the downhole with presence of hydrocyclone separator. In: UNSPECIFIED.

Soh, B.P. and Pao, W. and Al-Kayiem, H.H. (2015) Numerical analyses for improved hydrodynamics of deep water torpedo anchor. In: UNSPECIFIED.

Irawan, S. and Bharadwaj, A.M. and Temesgen, B. and Karuppanan, S. and Abdullah, M.Z.B. (2015) Effect of wear on the burst strength of l-80 steel casing. In: UNSPECIFIED.

Al-Kayiem, A.H.H. and Ibrahim, M.A. (2015) The influence of the equivalent hydraulic diameter on the pressure drop prediction of annular test section. In: UNSPECIFIED.

Firmansyah, F. and Ayandotun, W.B. and Zainal, E.Z. and Aziz, A.A.R.A. and Heika, M.R. (2015) Performance of CO2 enrich CNG in direct injection engine. In: UNSPECIFIED.

Firmansyah and Aziz, A.R.A. and Heikal, M.R. (2015) The combustion behavior of diesel/CNG mixtures in a constant volume combustion chamber. In: UNSPECIFIED.

Syaifuddin Mohd, M. and Rashid, A. and Syafiq Mohd, M. (2015) Investigation of mechanical field weakening of axial flux permanent magnet motor. In: UNSPECIFIED.

Karajeh, A.I. and Ibrahim, M.Y.B. and Lode, N.A.B. (2015) Impact of voluntary disclosure on earnings management in Malaysian companies: A proposed analysis. In: UNSPECIFIED.

Al-Arabiat, D. and Wan Ahmad, W.F. and Sarlan, A. (2015) Review on critical factors of adopting cloud mobile learning. In: UNSPECIFIED.

Ghazali, Z. and Zahid, M. (2015) Environmental sustainability: Carbon emission reduction strategies and reporting among Malaysian construction companies. In: UNSPECIFIED.

Rubab, S. and Hassan, M.F. and Mahmood, A.K. and Shah, S.N.M. (2015) Forecasting volunteer grid workload using Holt-Winters' method. In: UNSPECIFIED.

Bano, S. and Ting, D.H. (2015) Digital era generation: Zhai Nan and Zhai Nv blessing or curse. In: UNSPECIFIED.

Serai, M.H. and Johl, S.K. and Marimuthu, M. (2015) Conceptual framework of sustainable corporate entrepreneurship. In: UNSPECIFIED.

Makki, B.I. and Salleh, R. and Harun, H. (2015) Work readiness, career self-efficacy and career exploration: A correlation analysis. In: UNSPECIFIED.

Shamim, A. and Ghazali, Z. and Abdul Jamak, A.B.S. (2015) Extrinsic experiential value as an antecedent of customer citizenship behavior. In: UNSPECIFIED.

Amin, A. and Rehman, M. and Basri, S. and Hassan, M.F. (2015) A proposed conceptual framework of programmer's creativity. In: UNSPECIFIED.

Javaid, M.U. and Ghazali, Z. and Binsha, A.S.N. and Langove, N. (2015) Psychosocial risks: Health and wellbeing of workers in petrochemical industry of Malaysia. In: UNSPECIFIED.

Hassan, R. and Marimuthu, M. and Johl, S.K. (2015) Demographic diversity and firm value: A review on large companies using panel data approach. In: UNSPECIFIED.

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2015) Modelling educational games through multi-domain framework in light of game play. In: UNSPECIFIED.

Khan, M.A. and Ibrahim, M.Y. (2015) Corporate governance mechanism constraining Earning Management in Malaysian listed companies. In: UNSPECIFIED.

Ahmed, S. and Ting, D.H. and Johl, S.K. and Abdul Jamak, A.B.S.B. (2015) Game changing strategies for retailers: How to create utilitarian offers for shoppers. In: UNSPECIFIED.

Abdul Jamak, A.B.S. and Shamim, A. and Ghazali, Z. (2015) Impact of customer citizenship behavior on corporate brand experience. In: UNSPECIFIED.

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2015) An interpretive approach to model educational games: Learning theories domain using multi-domain framework. In: UNSPECIFIED.

Alaloul, W.S. and Liew, M.S. and Wan Abdullah Zawawi, N.A. (2015) The characteristics of coordination process in construction projects. In: UNSPECIFIED.

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2015) A multi-domain framework: A qualitative study evolving understanding of subject-matter in modelling educational games. In: UNSPECIFIED.

Sohail, A. and Dominic, P.D.D. (2015) Business process improvement: A process warehouse based resource management method. In: UNSPECIFIED.

Rahman, H.U. and Ibrahim, M.Y. and Ahmad, A.C. (2015) The impact of soft regulations on boardroom diversity and shareholders' confidence in Malaysia. In: UNSPECIFIED.

Ali, W. and Abdullah, A. (2015) The long-run relationship between economic growth, financial development, trade openness and CO2 emissions in Malaysia. In: UNSPECIFIED.

Hasni, M.M. and Majid, Z.A. and Senu, N. (2015) Direct 4-point 1-step block method for solving Dirichlet boundary value problem. In: UNSPECIFIED.

Daud, H. and Razali, R. and Jung, L.T. and Zaida, S. (2015) Bayesian Islamic medication expert system (B-IMES). In: UNSPECIFIED.

Zainuddin, N. and Ibrahim, Z.B. and Othman, K.I. and Suleiman, M. and Jamaludin, N. (2015) Numerical solution of second order ODE directly by two point block backward differentiation formula. In: UNSPECIFIED.

Jamaludin, N. and Monsi, M. and Hassan, N. and Zainuddin, N. and Rashid, N.I. (2015) The efficiency of convergence rate for IMSS2-5D procedure. In: UNSPECIFIED.

Rahman, Z.H.A. and Khir, M.H.Md. and Burhanudin, Z.A. (2015) CMOS-MEMS thermoelectric generator for low power medical devices. In: UNSPECIFIED.

Sulaimon, A.A. and Govindasamy, K. (2015) New correlation for predicting asphaltene deposition. In: UNSPECIFIED.

Saboorian-Jooybari, H. and Abeyat, E. (2015) Derivation of new analytical expressions for calculation of gas-liquid relative permeabilities through fractures-Part I: Incompressible flow. In: UNSPECIFIED.

Kumar, S. and Awang, M. and Ahmed, S. and Dehraj, N.U.H. and Saleem, Y.S. (2015) Worm-like micelles as a mobility control agent for chemical enhanced oil recovery. In: UNSPECIFIED.

Md Yusof, M.A. and Fuad, I.I.M. and Matali, A.A.A.A. (2015) Improved hydrocarbon recovery of a lean retrograde gas reservoir under propane injection. In: UNSPECIFIED.

Sugumaran, M. (2015) Study on effect of low calcium fly ash on geopolymer cement for oil well cementing. In: UNSPECIFIED.

Bahrami, N. and Soroush, S. and Hossain, M. and Lashari, A. and Daloma, M. and Kabir, A. (2015) Evaluation of damage mechanisms in tight gas reservoirs: Field example from perth Basin. In: UNSPECIFIED.

Biyanto, T.R. and Natawiria, A.D.S. and Kusuma, F. and Musyafa, A. and Noriyati, R.D. and Costa, S.D. and Irawan, S. (2015) The effects of test interval on safety instrumented function (SIF) according to Safety Integrity Level (SIL) value on three phase separator application. In: UNSPECIFIED.

Mumtaz, M. and Tan, I.M. and Mushtaq, M. (2015) Synergistic effects of surfactants mixture for foam stability measurements for enhanced oil recovery applications. In: UNSPECIFIED.

Shabib-Asl, A. and Ayoub, M.A. and Elraies, K.A. (2015) Laboratory investigation into wettability alteration by different low salinity water compositions in sandstone rock. In: UNSPECIFIED.

Wahid, N. and Yusof, M.A.M. and Hanafi, N.H. (2015) Optimum nanosilica concentration in synthetic based mud (SBM) for high temperature high pressure well. In: UNSPECIFIED.

Janier, J.B. and Jalil, M.A.B.A. and Samin, M.I.B.M. and Karim, S.A.B.A. (2015) Quantification of asphaltene precipitation by scaling equation. In: UNSPECIFIED.

Ridha, S. and Yerikania, U. (2015) New nano-geopolymer cement system improves wellbore integrity upon acidizing job: Experimental findings. In: UNSPECIFIED.

Satti, I.A. and Yusoff, W.I.W. (2015) A new method for overpressure mechanisms analysis. In: UNSPECIFIED.

Bahrami, N. and Dousi, N. and Lashari, A. (2015) Evaluation of damage mechanisms in tight gas reservoirs: Integration of laboratory experiments and field data with numerical simulation. In: UNSPECIFIED.

Sai, P.H.V.S.T. and Sharma, K.V. and Devarayapalli, K.C. and Rao, J.V.R. (2015) GO-TiO2 Nano Composites for Silicon PV Cell Application. In: UNSPECIFIED.

Prajapati, S. and Ghosh, D. (2015) Analysis of shear-wave splitting using multicomponent seismic data. In: UNSPECIFIED.

Singh, M.M. and Chieng, L.B. and Hassan, R. and Zaaba, Z.F. (2015) Friends personalization of trustworthiness for privacy perseverance in social networking. In: UNSPECIFIED.

Balaji, V. and Balaji, M. and Chandrasekaran, M. and Khan, M.K.A.A. and Elamvazuthi, I. (2015) Optimization of PID Control for High Speed Line Tracking Robots. In: UNSPECIFIED.

Balaji, M. and Balaji, V. and Chandrasekaran, M. and Khan, M.K.A.A. and Elamvazuthi, I. (2015) Robotic Training to Bridge School Students with Engineering. In: UNSPECIFIED.

Sari, E. and Duh, H. and Brereton, M. and Taylor, J.L. and Awori, K. and Wan Bt Ahmad, W.F. (2015) Experience design in the Asia Pacific ICT landscape. In: UNSPECIFIED.

Naz, Muhammad Yasin and Sulaiman, Shaharin Anwar and Ari-Wahjoedi, Bambang and Ku Shaari, Ku Zilati (2015) Effect of Temperature and Pressure on Spray Properties of Tapioca Starch Adhesives. In: Applied Mechanics and Materials.

Hassan, Luqman Hakim and Ku Shaari, Ku Zilati and Man, Zakaria (2015) Urea hardness optimization in a fluidized bed coating equipment using Taguchi design method. In: Applied mechanics and materials.

Trinh, TH and KuShaari, K (2015) Modeling base to design controlled release fertilizer matching with nitrogen uptake of rice plant. In: Computing and Systems Technology Division 2015-Core Programming Area at the 2015 AIChE Annual Meeting.

Ganesan, Timothy and Elamvazuthi, Irraivan and Vasant, Pandian and Shaari, Ku Zilati Ku (2015) Multiobjective Optimization of Bioactive Compound Extraction Process via Evolutionary Strategies. In: Intelligent Information and Database Systems: 7th Asian Conference, ACIIDS 2015, Bali, Indonesia, March 23-25, 2015, Proceedings, Part II 7.

Moniruzzaman, M and Mahmood, H and Kamiya, N and Yusup, S and Goto, M (2015) Activity and stability of enzyme immobilized with ionic liquid based polymer materials. In: J Eng Sci Technol (Special Issue on SOMCHE 2014 and RSCE 2014 Conference).

Jusoh, Norwahyu and Yeong, Yin Fong and Lau, Kok Keong and Azmi, Mohd Shariff (2015) Membranes for gas separation current development and challenges. In: Applied Mechanics and Materials.

Al-Shargie, Fares and Tang, Tong Boon and Badruddin, Nasreen and Kiguchi, Masashi (2015) Simultaneous measurement of EEG-fNIRS in classifying and localizing brain activation to mental stress. In: 2015 IEEE International Conference on Signal and Image Processing Applications (ICSIPA).

Mukhtar, Amir and Tang, Tong Boon (2015) Vision based motorcycle detection using HOG features. In: 2015 IEEE International Conference on Signal and Image Processing Applications (ICSIPA).

Tang, Tong Boon and Noor, Nur Haedzerlin Md (2015) Towards wearable active humidifier for dry eyes. In: 2015 IEEE International Circuits and Systems Symposium (ICSyS).

Hyder, Rasha and Kamel, Nidal and Boon, Tang Tong and Reza, Faruque (2015) Mapping of language brain areas in patients with brain tumors. In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Mian, Muhammad Umer and Dennis, John Ojur and Khir, MH and Riaz, Kashif and Iqbal, Abid and Bazaz, Shafaat A and Tang, TB (2015) MEMS 3-DoF gyroscope design, modeling and simulation through equivalent circuit lumped parameter model. In: AIP Conference Proceedings.

Rasheed, Waqas and Tang, Tong Boon and Hamid, Nor Hisham Bin (2015) Default mode functional connectivity estimation and visualization framework for MEG data. In: 2015 7th International IEEE/EMBS Conference on Neural Engineering (NER).

Hani, Ahmad Fadzil M and Feng, Ying Xing and Tang, Tong Boon and Kiguchi, Masashi (2015) Assessment of brain haemodynamic responses using optical topography modality. In: 2015 2nd International Conference on Biomedical Engineering (ICoBE).

This list was generated on Mon Nov 25 03:29:03 2024 +08.