Browse by Type

Group by: Creators | Item Type | No Grouping

Jump to: | , | . | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | W | Y | Z

Number of items: 608.

Hassan, Rohail and Marimuthu, Maran and Kaur Johl, Satirenjit (2015) Diversity, Corporate Governance and Implication on Firm Financial Performance. Diversity, Corporate Governance and Implication on Firm Financial Performance, 7 (2). pp. 28-35. ISSN 1947-5667

Habib, K and K Assadi, M and Zainudin, M H B (2015) Study of Solar Driven Silica gel-Water based Adsorption Chiller. Materials Science and Engineering: A, 88. ISSN 0921-5093

,

Muhammad Aswin, Bashar S Mohammed, Mohammad Shahir Liew, Zubair (2015) Shear Failure of RC Dapped-End Beams. Shear Failure of RC Dapped-End Beams. (Submitted)

.

., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, M Rafi Raza (2015) THERMAL CONDUCTIVITY OF POWDER INJECTION MOLDED CARBON NANOTUBE-REINFORCED COPPER-MATRIX COMPOSITES. THERMAL CONDUCTIVITY OF POWDER INJECTION MOLDED CARBON NANOTUBE-REINFORCED COPPER-MATRIX COMPOSITES.

., Edwar Yazid, Mohd Shahir Liew, Setyamartana Parman, Velluruzhati (2015) Identification of slow drift motions of a truss spar platform using parametric Volterra model. Identification of slow drift motions of a truss spar platform using parametric Volterra model.

., Edwar Yazid, Mohd Shahir Liew, Setyamartana Parman, Velluruzhati (2015) Improving the modeling capacity of Volterra model using evolutionary computing methods based on Kalman Smoother adaptive filter. Edwar Yazid, Mohd Shahir Liew, Setyamartana Parman, Velluruzhatil John Kurian. (Submitted)

., Liyana Rosely, Abdul Halim Abdul Latiff (2015) Fracture Network Correlation Analysis of Meta-Sediment Outcrop in Terengganu Coastline and Malay Basin. Fracture Network Correlation Analysis of Meta-Sediment Outcrop in Terengganu Coastline and Malay Basin.

., VJ Kurian, AM Al-Yacouby, AA Sebastian, MS Liew, VG Idichandy (2015) Effect of Sacrificial Anodes and Marine Growth on Hydrodynamic Coefficients of Rigid Cylinders. Effect of Sacrificial Anodes and Marine Growth on Hydrodynamic Coefficients of Rigid Cylinders. (Submitted)

., Irfan Shirazi, Faiz Ahmad, M Rafi Raza, Ali S Muhsan, M Aslam (2015) Shear controlled alignment of short carbon fibers in copper matrix composite green samples produced by powder injection molding. Shear controlled alignment of short carbon fibers in copper matrix composite green samples produced by powder injection molding. (Submitted)

., Mehboob Khatani, Norani Muti Mohamed, Nor Hisham Hamid, Ali Same (2015) Effect of photoanode thickness on electrochemical performance of dye sensitized solar cell. Effect of photoanode thickness on electrochemical performance of dye sensitized solar cell. (Submitted)

., NH Mardi, MA Malek, MS Liew, HE Lee (2015) A Conceptual Review of Tsunami Models Based on Sumatera-Andaman Tsunami Event. A Conceptual Review of Tsunami Models Based on Sumatera-Andaman Tsunami Event. (Submitted)

., NH Mardi, MS Liew, MA Malek, MN Abdullah (2015) Tsunami Forecasting Due to Seismic Activity in Manila Trench of Malaysia Offshore Oil Blocks. Tsunami Forecasting Due to Seismic Activity in Manila Trench of Malaysia Offshore Oil Blocks. (Submitted)

., Muhammad Rafi Raza, Faiz Ahmad, Norhamidi Muhamad, Abu Bakar Sul (2015) Effects of residual carbon on microstructure and surface roughness of PIM 316L stainless steel. Effects of residual carbon on microstructure and surface roughness of PIM 316L stainless steel.

A

Amin, Hafeez Ullah and Malik, Aamir Saeed and Kamel, Nidal S. and Chooi, Weng-Tink and Hussain, Mohammad (2015) P300 correlates with learning & memory abilities and fluid intelligence. JOURNAL OF NEUROENGINEERING AND REHABILITATION.

Ayman N Qadrouh*, Jose’M Carcione, Ahmed Salim, Zuhar Harith, . (2015) Best Fitting of NMO Equations and Depth Conversion. Best Fitting of NMO Equations and Depth Conversion.

Ahmad, Junaid and Malik, Aamir Saeed and Abdullah, Mohd Faris and Kamel, Nidal S. and Xia, Likun (2015) A novel method for vegetation encroachment monitoring of transmission lines using a single 2D camera. Pattern Analysis and Applications.

Ayman Qadrouh, José M Carcione, Ahmed M Salim, Zuhar Zahir Tuan , . (2015) Attenuation effects on the seismic response of a bottom-simulating reflector. Attenuation effects on the seismic response of a bottom-simulating reflector.

Ayman Qadrouh, José M Carcione, Ahmed M Salim, Zuhar Zahir Tuan , . (2015) Journal of Natural Gas Science and Engineering. Journal of Natural Gas Science and Engineering.

Askury Abd Kadir, Mohd Razlan Abdul Rahman, Choong Chee Meng, Fa, . (2015) Characterization and modelling of naturally fractured granites in the Redang Island, Terengganu, Malaysia. Characterization and modelling of naturally fractured granites in the Redang Island, Terengganu, Malaysia.

Amin, Hafeez Ullah and Malik, Aamir Saeed and Ahmad, Rana Fayyaz and Badruddin , Nasreen and Kamel, Nidal S. and Hussain, Muhammad and Chooi, Weng-Tink (2015) Feature extraction and classification for EEG signals using wavelet transform and machine learning techniques. Australasian Physical and Engineering Sciences in Medicine. ISSN 1879-5447

Al-Kayiem, Hussain H. and Yassen, Tadahmun A. (2015) ON THE NATURAL CONVECTION HEAT TRANSFER IN A RECTANGULAR PASSAGE SOLAR AIR HEATER. solar energy, 112. pp. 310-318.

A H Abdul Latiff, D P Ghosh, S N F Jamaludin, . (2015) Structural Enhancement in Shallow Gas Cloud Region Structural Enhancement in Shallow Gas Cloud Region. Structural Enhancement in Shallow Gas Cloud Region Structural Enhancement in Shallow Gas Cloud Region.

Abdul Halim, Hairul N and M. Shariff, Azmi and Tan, Lian S and Bustam, Mohammad A (2015) Mass transfer performance of CO2 absorption from natural gas using monoethanolamine (MEA) in high pressure operations. Industrial & Engineering Chemistry Research, 54 (5). pp. 1675-1680.

Aleem, W and Mellon, N and Sufian, S and Mutalib, MIA and Subbarao, D (2015) A model for the estimation of surface tension of pure hydrocarbon liquids. Petroleum Science and Technology, 33 (23-24). pp. 1908-1915.

Aleem, W and Mellon, N and Sufian, S and Mutalib, MIA and Subbarao, D (2015) A model for the estimation of viscosity of pure hydrocarbon liquids. Petroleum Science and Technology, 33 (21-22). pp. 1815-1821.

Ayoub, M. and Inayat, A. and Rashid, U. and Ullah, S. and Lal, B. (2015) Synthesis of stable lithium modified mesoporous catalyst for oligomerization of biodisel-drive glycerol to diglycerol. Chemical Engineering Transactions, 45. pp. 1291-1296.

Ahmad, NNR and Mukhtar, H and Man, Z and Mohshim, DF (2015) Synthesis and characterization of EDA-functionalized polyethersulfone/SAPO-34 mixed matrix membrane. ARPN Journal of Engineering and Applied Sciences, 10 (15). pp. 6192-6195.

Abidin, Ma Umaira Suhaddha Zainal and Mukhtar, Hilmi and Shaharun, MS (2015) Effect of pH on Flux and Rejection for Diglycolamine and Triethanolamine. Chemical Engineering Transactions, 45. pp. 1429-1434.

Ahmad, Faizan and Lau, Kok Keon and Lock, Serene Sow Mu and Rafiq, Sikander and Khan, Asad Ullah and Lee, Moonyong (2015) Hollow fiber membrane model for gas separation: Process simulation, experimental validation and module characteristics study. Journal of Industrial and Engineering Chemistry, 21. pp. 1246-1257.

Al Jameli, Marwan and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2015) An Energy Efficient Cross-Layer Network Operation Model For IEEE 802.15.4-Based Mobile Wireless Sensor Networks. IEEE Sensors Journal, 15 (2). pp. 684-692. ISSN 1530-437X

Anggraeni, Silvia and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2015) Review of Single Cycle Shifter for Structured LDPC Encoder. Applied Mechanics and Materials, 763. ISSN 1660-9336

Alhussian, Hitham and Zakaria, Nordin and Hussin, Fawnizu Azmadi (2015) Minimizing Scheduling Overhead In LRE-TL Real-Time Multiprocessor Scheduling Algorithm. Turkish Journal of Electrical Engineering & Computer Sciences. pp. 1-15. ISSN 1303-6203

Ahmed Mohamed Ahmed Salim, Osama Akhtar Janjua, Ali Wahid, Aruba, . (2015) Linear Regression Approach for Porosity and Permeability Calculations from Well Logs: A Case Study in NW Bonaparte Basin, Australia. Linear Regression Approach for Porosity and Permeability Calculations from Well Logs: A Case Study in NW Bonaparte Basin, Australia.

Abdullah, M.R.T.L. and Siraj, S. and Yean, L.L. (2015) Perception of undergraduates on their language competence based on english language national examination results. Pertanika Journal of Social Sciences and Humanities, 23 (August). pp. 55-72.

Armi, N. and Yusoff, M.Z. and Saad, N.M. (2015) Decentralized multiuser cooperative spectrum sensing in cognitive radio system. International Journal on Electrical Engineering and Informatics, 7 (3). pp. 418-428.

Asadpour, R. and Sapari, N.B. and Isa, M.H. and Kakooei, S. and Orji, K.U. (2015) Acetylation of corn silk and its application for oil sorption. Fibers and Polymers, 16 (9). pp. 1830-1835.

Abidin, M.U.S.Z. and Mukhtar, H. and Shaharun, M.S. (2015) Effect of pH on flux and rejection for diglycolamine and triethanolamine. Chemical Engineering Transactions, 45. pp. 1429-1434.

Aissaoui, T. and Alnashef, I.M. and Hayyan, M. and Hashim, M.A. (2015) Erratum: Neoteric FT-IR investigation on the functional groups of phosphonium-based deep eutectic solvents (Spectrochim. Acta Part A: Mol. Biomol. Spectrosc. (2015) 149 (588-591) DOI: 10.1016/j.saa.2015.05.001 PII: S1386142515005892). Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy, 149. R1.

Ali, A.S.O. and Asirvadam, V.S. and Malik, A.S. and Eltoukhy, M.M. and Aziz, A. (2015) Age-Invariant Face Recognition Using Triangle Geometric Features. International Journal of Pattern Recognition and Artificial Intelligence, 29 (5).

Akhtar, S. and Kurnia, J.C. and Shamim, T. (2015) A three-dimensional computational model of H2-air premixed combustion in non-circular micro-channels for a thermo-photovoltaic (TPV) application. Applied Energy, 152. pp. 47-57.

Aldabbagh, G. and Hasbullah, H. and Verma, K. and Bamasak, O. (2015) Space-efficient and accurate forwarding loop detection method using Bloom-filter for fast and reliable internet routing. Journal of Theoretical and Applied Information Technology, 79 (3). pp. 456-475.

Amin, M.M. and Yusup, S. (2015) Transesterification via direct-ultrasonic irradiation of rubber seed oil with waste materials based heterogeneous catalyst. Chemical Engineering Transactions, 45. pp. 1267-1272.

Ahmad, N.N.R. and Mukhtar, H. and Man, Z. and Mohshim, D.F. (2015) Synthesis and characterization of EDA-functionalized polyethersulfone/SAPO-34 mixed matrix membrane. ARPN Journal of Engineering and Applied Sciences, 10 (15). pp. 6192-6195.

Amin, H.U. and Malik, A.S. and Kamel, N. and Chooi, W.-T. and Hussain, M. (2015) P300 correlates with learning & memory abilities and fluid intelligence. Journal of NeuroEngineering and Rehabilitation, 12 (1).

Aniza, N. and Hassan, S. and Nor, M.F.M. and Kee, K.E. and Aklilu, T. (2015) Investigation of thermal degradation of poultry processing dewatered sludge using thermogravimetric analysis method. Jurnal Teknologi, 76 (5). pp. 7-10.

Aissaoui, T. and Alnashef, I.M. and Hayyan, M. and Hashim, M.A. (2015) Neoteric FT-IR investigation on the functional groups of phosphonium-based deep eutectic solvents. Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy, 149. pp. 588-591.

Altaf, K. and Rani, A.M.B.A. (2015) Numerical study of profiled conformal cooling channels for cooling time reduction in injection mould tools. International Journal of Engineering Systems Modelling and Simulation, 7 (4). pp. 230-237.

Ali, A. and Farooq, M.U. and Naz, M.Y. and Qayyum, A. and Khan, Y. and Ghaffar, A. and Shukrullah, S. (2015) Symmetric tungsten triple probe diagnostic for time resolved measurements in plasma discharge. International Journal of Applied Electromagnetics and Mechanics, 49 (2). pp. 289-298.

Abbasi, I. and Ali, S.S.A. and Ovinis, M. and Naeem, W. (2015) Adaptive identification of underwater glider using U-model for depth & pitch control under hydrodynamic disturbances. Jurnal Teknologi, 74 (9). pp. 113-118.

Ahmed, M.O. and Yenduri, A. and Kurian, V.J. (2015) Investigation on the dynamic responses of a truss spar platform for different mooring line groups. Journal of Marine Science and Application, 14 (2). pp. 189-195.

Al Riza, D.F. and Gilani, S.I.U.H. and Aris, M.S. (2015) Standalone photovoltaic systems sizing optimization using design space approach: Case study for residential lighting load. Journal of Engineering Science and Technology, 10 (7). pp. 943-957.

Azarpour, A. and Nejad Ghaffar Borhani, T. and Wan Alwi, S.R. and Abdul Manan, Z. and Madooli Behbehani, M. (2015) Prediction of Pd/C Catalyst Deactivation Rate and Assessment of Optimal Operating Conditions of Industrial Hydropurification Process. Industrial and Engineering Chemistry Research, 54 (28). pp. 7067-7082.

Ali, A.S.O. and Sagayan, V. and Saeed, A.M. and Ameen, H. and Aziz, A. (2015) Age-invariant face recognition system using combined shape and texture features. IET Biometrics, 4 (2). pp. 98-115.

Al-Waked, R. and Nasif, M.S. and Morrison, G. and Behnia, M. (2015) CFD simulation of air to air enthalpy heat exchanger: Variable membrane moisture resistance. Applied Thermal Engineering, 84. pp. 301-309.

Ahmad, A.H. and Mahmood, A.K. and Jaafar, J. (2015) The architecture of fuzzy agent in rescuer monitoring system. American Journal of Engineering and Applied Sciences, 8 (3). pp. 345-353.

Abdullah, M.A. and Afzaal, M. and Ismail, Z. and Ahmad, A. and Nazir, M.S. and Bhat, A.H. (2015) Comparative study on structural modification of Ceiba pentandra for oil sorption and palm oil mill effluent treatment. Desalination and Water Treatment, 54 (11). pp. 3044-3053.

Abdul Majid, N.D. and Mohd Shariff, A. and Rusli, R. (2015) Process Safety Management (PSM) for managing contractors in process plant. Journal of Loss Prevention in the Process Industries, 37. pp. 82-90.

Ahmed, S. and Kaur Johl, S. and Bin Abdul Jamak, A.B.S. and Mohamed Noor, A.B. (2015) Mind the purchasersâ�� disturbance: Exploring planned purchasersâ�� influences. Advanced Science Letters, 21 (5). pp. 1381-1384.

Abbasi, A.Z. and Jamak, A.B.S.A. (2015) A conceptual model: Video-game engagement and its moderating impact on consumersâ�� personality. Advanced Science Letters, 21 (5). pp. 1216-1220.

Abdel-Aty, A.-H. and Zakaria, N. and Cheong, L.Y. and Metwally, N. (2015) Entanglement and teleportation via partial entangled-state quantum network. Journal of Computational and Theoretical Nanoscience, 12 (9). pp. 2213-2220.

Al-Kayiem, H.H. and Heng, Y.M. (2015) Experimental investigation of rooftop solar chimney for natural ventilation. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10249-10254.

Ali, E.M. and Yahaya, N.Z. and Perumal, N. and Zakariya, M.A. (2015) Design and development of harvester RECTENNA at GSM band for battery charging applications. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10206-10212.

Abbas, M.A. and Wan Ahmad, W.F. and Kalid, K.S. (2015) A semantic web based framework for preschool cognitive skills tutoring system. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17758-17765.

Ahsanullah and Sulaiman, S. and Mahmood, A.K.B. and Khan, M. (2015) Understanding factors influencing User Experience of interactive systems: A literature review. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 18175-18185.

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Root cause of reinforced concrete dapped-end beams failure. International Journal of Applied Engineering Research, 10 (22). pp. 42927-42933.

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Prediction of RC beams failure load using non-linear finite element analysis. International Journal of Applied Engineering Research, 10 (22). pp. 42974-42980.

Al-Jemeli, M. and Hussin, F.A. (2015) An energy efficient cross-layer network operation model for IEEE 802.15.4-based mobile wireless sensor networks. IEEE Sensors Journal, 15 (2). pp. 684-692.

Afrooz, I.E. and Ã�chsner, A. (2015) Effect of the carbon nanotube distribution on the thermal conductivity of composite materials. Journal of Heat Transfer, 137 (3).

Amin, H.U. and Malik, A.S. and Ahmad, R.F. and Badruddin, N. and Kamel, N. and Hussain, M. and Chooi, W.-T. (2015) Feature extraction and classification for EEG signals using wavelet transform and machine learning techniques. Australasian Physical and Engineering Sciences in Medicine, 38 (1). pp. 139-149.

Ahmad, A.H. and Mahmood, A.K. and Jaafar, J. (2015) The architecture of fuzzy agent in rescuer monitoring system. American Journal of Engineering and Applied Sciences, 8 (3). pp. 345-353.

Ansari, S. and Gonzalez, J.P. and Otero, P. and Ansari, A. (2015) Analysis of MAC Strategies for Underwater Applications. Wireless Personal Communications, 85 (2). pp. 359-376.

Adeyemi, B.J. and Sulaimon, A.A. (2015) Investigating the kinetics of water-in-crude oil emulsion stability. ARPN Journal of Engineering and Applied Sciences, 10 (16). pp. 7131-7136.

Abid, S.A. and Othman, M. and Shah, N. and Sabir, O. and Khan, A.U.R. and Ali, M. and Shafi, J. and Ullah, S. (2015) Merging of DHT-based logical networks in MANETs. Transactions on Emerging Telecommunications Technologies, 26 (12). pp. 1347-1367.

Abbas, T. and Kallidanthiyil Chellappan, L. and Mutalib, M.I.A. and Cheun, K.Y. and Nasir Shah, S. and Nazir, S. and Hassan, A. and Abai, M.B. and Khan, E. (2015) Stability and Performance of Physically Immobilized Ionic Liquids for Mercury Adsorption from a Gas Stream. Industrial and Engineering Chemistry Research, 54 (48). pp. 12114-12123.

Ahmad, A. and Shah, S.M.U. and Othman, M.F. and Abdullah, M.A. (2015) Aerobic and anaerobic co-cultivation of Nannochloropsis oculata with oil palm empty fruit bunch for enhanced biomethane production and palm oil mill effluent treatment. Desalination and Water Treatment, 56 (8). pp. 2055-2065.

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Shear Failure of RC Dapped-End Beams. Advances in Materials Science and Engineering, 2015.

Ali, S.M. and Zakariya, M.A. and Baharudin, Z. and Adz, J.J. and Jilani, M.T. and Ain, M.F. and Ahmad, Z.A. (2015) Parametric study of Cylindrical Dielectric Resonator Antenna (CDRA) feeder with symmetric parabolic reflector. Research Journal of Applied Sciences, Engineering and Technology, 10 (6). pp. 607-617.

Adam, I.K. and Aziz, A.R.A. and Yusup, S. (2015) Determination of diesel engine performance fueled biodiesel (Rubber seed/palm oil mixture) diesel blend. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2675-2685.

Ayoub, M.A. and Shabib-Asl, A. and AbdellahiZein, A.M. and Elraies, K.A. and MohdSaaid, I.B. (2015) Recovery optimization of an oil reservoir by water flooding under different scenarios; a simulation approach. Research Journal of Applied Sciences, Engineering and Technology, 10 (4). pp. 357-372.

Ahsanullah and Sulaiman, S. and Mahmood, A.K.B. and Khan, M. and Madni, M. (2015) Applications of multi-touch tabletop displays and their challenging issues: An overview. International Journal on Smart Sensing and Intelligent Systems, 8 (2). pp. 966-991.

Ani, Z.C. and Sarlan, A. (2015) Validating reusability of software projects using object-oriented design metrics. Lecture Notes in Electrical Engineering, 339. pp. 845-850.

Abdul Halim, H.N. and Shariff, A.M. and Tan, L.S. and Bustam, M.A. (2015) Mass transfer performance of CO2 absorption from natural gas using monoethanolamine (MEA) in high pressure operations. Industrial and Engineering Chemistry Research, 54 (5). pp. 1675-1680.

Abdalla, M.O. and Nagarajan, T. (2015) A computational study of the actuation speed of the hydraulic cylinder under different portsâ�� sizes and configurations. Journal of Engineering Science and Technology, 10 (2). pp. 160-173.

Awang, A. and Agarwal, S. (2015) Data Aggregation Using Dynamic Selection of Aggregation Points Based on RSSI for Wireless Sensor Networks. Wireless Personal Communications, 80 (2). pp. 611-633.

Awang, M. and Raza, S.K. and Yahaya, M.S.A. (2015) Microstructure and hardness investigation of different welding passes in weld zones. Materialwissenschaft und Werkstofftechnik, 46 (4-5). pp. 492-497.

Abdul Rahim, R.H. and Rahmiati, T. and Azizli, K.A. and Man, Z. and Nuruddin, M.F. and Ismail, L. (2015) Comparison of using NaOH and KOH activated fly ash-based geopolymer on the mechanical properties. Materials Science Forum, 803. pp. 179-184.

Asif, A. and Man, Z. and Mohd Azizli, K.A. and Nuruddin, M.F. and Ismail, L. (2015) The effect of Si/Al ratio and sodium silicate on the mechanical properties of fly ash based geopolymer for coating. Materials Science Forum, 803. pp. 355-361.

Adeyemi, B.J. and Sulaimon, A.A. (2015) Investigating the kinetics of water-in-crude oil emulsion stability. ARPN Journal of Engineering and Applied Sciences, 10 (16). pp. 7131-7136.

Aleem, W. and Mellon, N. and Sufian, S. and Mutalib, M.I.A. and Subbarao, D. (2015) A Model for the Estimation of Surface Tension of Pure Hydrocarbon Liquids. Petroleum Science and Technology, 33 (23-24). pp. 1908-1915.

Aftab, Asma and Shariff, A and Shaikh, M and Lal, Bhajan and Garg, Sahil and Abd Aziz, Nor Faiqa Bt (2015) Measurement and prediction of density, viscosity and refractive index of aqueous potassium β-alaninate. Aust J Basic Appl Sci, 9 (36). pp. 556-561.

Ayoub, Muhammad and Inayat, Abrar and Rashid, Umer and Ullah, Sami and Lal, Bhajan (2015) Synthesis of stable lithium modified mesoporous catalyst for oligomerization of biodisel-drive glycerol to diglycerol. Chemical Engineering Transactions, 45. pp. 1291-1296.

Araki, Shota and Wakabayashi, Rie and Moniruzzaman, Muhammad and Kamiya, Noriho and Goto, Masahiro (2015) Ionic liquid-mediated transcutaneous protein delivery with solid-in-oil nanodispersions. MedChemComm, 6 (12). pp. 2124-2128.

B

Bamatraf, Saeed and Hussain, Muhammad and Aboalsamh, Hatim and Qazi, Emad-Ul-Haq and Malik, Aamir Saeed and Amin, Hafeez Ullah and Mathkour, Hassan and Muhammad, Ghulam and Muhammad, Hafiz Imran (2015) A System for True and False Memory Prediction based on 2D and 3D Educational Contents and EEG Brain Signals. Computational Intelligence and Neuroscience. (In Press)

Ban, ZH and Lau, KK and Shariff, AM (2015) Prediction of the bubble nucleation rate in a quasi-stable cavitating nozzle using 2D computational fluid dynamics and enhanced classical nucleation theory. Engineering applications of computational fluid mechanics, 9 (1). pp. 247-258.

Bashiri, Robabeh and Mohamed, Norani Muti and Kait, Chong Fai and Sufian, Suriati (2015) Hydrogen production from water photosplitting using Cu/TiO2 nanoparticles: Effect of hydrolysis rate and reaction medium. International Journal of Hydrogen Energy, 40 (18). pp. 6021-6037.

Baheta, Aklilu Tesfamichael (2015) Parametric analysis of carbon dioxide transcritical and supercritical power cycles using low grade heat source. ARPN Journal of Engineering and Applied Sciences, 10 (21). ISSN 1819-6608

Bhattacharyya, E. and Zainal, A.Z. (2015) What do students and engineers have to say about communicative competence in technical oral presentations? Pertanika Journal of Social Sciences and Humanities, 23 (August). pp. 123-142.

Bakar, Z.A. and Abdullah, M.R.T.L. (2015) Importance of correct pronunciation in spoken english: Dimension of second language learners' perspective. Pertanika Journal of Social Sciences and Humanities, 23 (August). pp. 143-158.

Borhani, T.N.G. and Azarpour, A. and Akbari, V. and Wan Alwi, S.R. and Manan, Z.A. (2015) CO2 capture with potassium carbonate solutions: A state-of-the-art review. International Journal of Greenhouse Gas Control, 41. pp. 142-162.

Balogun, A.-L. and Matori, A.-N. and Hamid-Mosaku, A.I. (2015) A fuzzy multi-criteria decision support system for evaluating subsea oil pipeline routing criteria in East Malaysia. Environmental Earth Sciences, 74 (6). pp. 4875-4884.

Ben Ghanem, O. and Mutalib, M.I.A. and LÃ©veÃ®que, J.-M. and Gonfa, G. and Kait, C.F. and El-Harbawi, M. (2015) Studies on the Physicochemical Properties of Ionic Liquids Based On 1-Octyl-3-methylimidazolium Amino Acids. Journal of Chemical and Engineering Data, 60 (6). pp. 1756-1763.

Bakhsh, S.T. and Aman Sheikh, M. and Alghamdi, R. (2015) Self-Schedule and Self-Distributive MAC Scheduling Algorithms for Next-Generation Sensor Networks. International Journal of Distributed Sensor Networks, 2015.

Baheta, A.T. and Emad, M.A. (2015) Parametric analysis of carbon dioxide transcritical and supercritical power cycles using low grade heat source. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10169-10173.

Bhattacharjee, S. and Rahim, L.B.A. and Aziz, I.B.A. (2015) Enhancement of confidentiality and integrity during big data transmission using a hybrid technique. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 18029-18038.

Bou-Rabee, M.A. and Sulaiman, S.A. and Choe, G. and Han, D. and Saeed, T. and Marafie, S. (2015) Characteristics of solar energy radiation on typical summer and winter days in Kuwait. International Journal of Automotive and Mechanical Engineering, 12 (1). pp. 2944-2953.

Brahim-Belhaouari, S. and Hassan, M. and Walter, N. and Bermak, A. (2015) Advanced statistical metrics for gas identification system with quantification feedback. IEEE Sensors Journal, 15 (3). pp. 1705-1715.

Bahloul, M.R. and Yusoff, M.Z. and Saad, M.N.M. (2015) Efficient and low complexity modulation classification algorithm for MIMO systems. Research Journal of Applied Sciences, Engineering and Technology, 9 (1). pp. 58-64.

Besrour, S. and Rahim, L.B.A. and Dominic, P.D.D. (2015) Exploratory study to assess and evaluate requirement specification techniques using analysis determination requirements framework. Research Journal of Applied Sciences, Engineering and Technology, 9 (3). pp. 165-171.

Bajeh, A.O. and Basri, S. and Jung, L.T. (2015) An empirical validation of coupling and cohesion metrics as testability indicators. Lecture Notes in Electrical Engineering, 339. pp. 915-922.

Baharudin, Z. and Rehman, M.U.Z. and Zakariya, M.A. and Khir, M.H.M. and Khan, M.T. and Adz, J.J. (2015) Bowtie shaped substrate integrated waveguide bandpass filter. Lecture Notes in Electrical Engineering, 315. pp. 365-373.

Bayuaji, R. and Nuruddin, M.F. and Francis, S. and Ekaputri, J.J. and Triwulan and Junaedi, S. and Fansuri, H. (2015) Mechanical properties of MIRHA-fly ash geopolymer concrete. Materials Science Forum, 803. pp. 49-57.

Bokhari, A. and Chuah, L.F. and Yusup, S. and Ahmad, J. and Shamsuddin, M.R. and Teng, M.K. (2015) Microwave-assisted methyl esters synthesis of Kapok (Ceiba pentandra) seed oil: Parametric and optimization study. Biofuel Research Journal, 2 (3). pp. 281-287.

Binjuwair, Saud and Mohamad, Taib Iskandar and Almaleki, Ahmed and Alkudsi, Abdullah and Alshunaifi, Ibrahim (2015) The effects of research octane number and fuel systems on the performance and emissions of a spark ignition engine: A study on Saudi Arabian RON91 and RON95 with port injection and direct injection systems. Fuel, 158. pp. 351-360.

C

Chakraborty, Anirban and Ahmad, Tausif and Abdullah, Bawadi B and Bhattacharjee, Sekhar (2015) Process engineering studies on synthesis of gold nanoparticles by turkevitch method. Chemical Engineering Transactions, 45. pp. 1939-1944.

Chuah, Lai Fatt and Aziz, Abdul Rashid Abd and Yusup, Suzana and Bokhari, Awais and Kleme\v, Ji\v\'ı Jarom\'ır and Abdullah, Mohd Zamri (2015) Performance and emission of diesel engine fuelled by waste cooking oil methyl ester derived from palm olein using hydrodynamic cavitation. Clean Technologies and Environmental Policy, 17. pp. 2229-2241.

Chandio, Zubair A and Ramasamy, M and Mukhtar, Hilmi B (2015) Temperature effects on solubility of asphaltenes in crude oils. Chemical Engineering Research and Design, 94. pp. 573-583.

Choong Chee Meng, Manuel Pubellier, . (2015) Geological Structures of the Kinta Valley Revisited Using Drainage Anomalies. Geological Structures of the Kinta Valley Revisited Using Drainage Anomalies.

Choong Chee Meng, Askury Abd Kadir, Siti Nur Fathiyah Jamaludin, . (2015) KLEDANG FAULT: A STRIKE-SLIP FAULT? KLEDANG FAULT: A STRIKE-SLIP FAULT?.

Chakraborty, A. and Ahmad, T. and Abdullah, B.B. and Bhattacharjee, S. (2015) Process engineering studies on synthesis of gold nanoparticles by Turkevitch method. Chemical Engineering Transactions, 45. pp. 1939-1944.

Chan, Y.H. and Yusup, S. and Quitain, A.T. and Tan, R.R. and Sasaki, M. and Lam, H.L. and Uemura, Y. (2015) Effect of process parameters on hydrothermal liquefaction of oil palm biomass for bio-oil production and its life cycle assessment. Energy Conversion and Management, 104. pp. 180-188.

Chai, Y.H. and Yusup, S. and Chok, V.S. (2015) A review on nanoparticle addition in base fluid for improvement of biodegradable ester-based drilling fluid properties. Chemical Engineering Transactions, 45. pp. 1447-1452.

Chuah, L.F. and Yusup, S. and Abd Aziz, A.R. and Bokhari, A. and KlemeÅ¡, J.J. and Abdullah, M.Z. (2015) Intensification of biodiesel synthesis from waste cooking oil (Palm Olein) in a Hydrodynamic Cavitation Reactor: Effect of operating parameters on methyl ester conversion. Chemical Engineering and Processing: Process Intensification, 95. pp. 235-240.

Cheab, S. and Wong, P.W. and Chew, X.Y. (2015) Parallel Connected Dual-Mode Filter. IEEE Microwave and Wireless Components Letters, 25 (9). pp. 582-584.

Chung, K.W. and Sum, C.W. and Rahman, Abd.H.A. (2015) Stratigraphic succession and depositional framework of the Sandakan formation, Sabah. Sains Malaysiana, 44 (7). pp. 931-940.

Cheab, S. and Wong, P.W. (2015) Design and synthesis of quasi dual-mode, elliptic coaxial filter. Radioengineering, 24 (3). pp. 795-799.

Cheab, S. and Wong, P.W. and Chew, X.Y. (2015) Parallel Connected Dual-Mode Filter. IEEE Microwave and Wireless Components Letters, 25 (9). pp. 582-584.

Chala, G.T. and Sulaiman, S.A. and Japper-Jaafar, A. and Abdullah, W.A.K.W. (2015) Effects of cooling regime on the formation of voids in statically cooled waxy crude oil. International Journal of Multiphase Flow, 77. pp. 187-195.

Chala, G.T. and Sulaiman, S.A. and Japper-Jaafar, A. and Kamil Wan Abdullah, W.A. (2015) Study on influence of flow rates on voids in waxy crude oil subjected to dynamic and static cooling. Journal of Mechanical Engineering and Sciences, 9. pp. 1587-1594.

Che Mansor, M.F. and Cheng, E.M. and Zakaria, Z. and Abdul Malek, M.F. and Chik, A. and Rojan, M.A. and Zahid, L. and Abu Bakar, S. and Mohd Nasir, N.F. and Khor, S.F. and Beh, H.G. (2015) Microwave absorption analysis on recycled glass doped with Ferum (II, III) Oxide (Fe2O3). International Journal of Mechanical and Mechatronics Engineering, 15 (5). pp. 1-13.

Chin, S.C. and Shafiq, N. and Nuruddin, M.F. (2015) FRP as strengthening material for Reinforced Concrete beams with openings â�� A review. KSCE Journal of Civil Engineering, 19 (1). pp. 213-219.

Cheab, S. and Wong, P.W. (2015) Design and synthesis of quasi dual-mode, elliptic coaxial filter. Radioengineering, 24 (3). pp. 795-799.

Chua, Lin Kiat and Jusoh, Norwahyu and Yeong, Yin Fong (2015) JOURNAL OF APPLIED SCIENCE AND AGRICULTURE.

D

Dan-Mallam, Y. and Abdullah, M.Z. and Yusoff, P.S.M.M. (2015) Mechanical properties of short and continuous kenaf/PET fibre reinforced polyoxymethylene composite. Advanced Composites Letters, 24 (4). pp. 81-91.

Doraiselvan, K. and Yusup, S. and Wai, C.K. and Muda, N.S. (2015) Optimization studies on catalytic pyrolysis of empty fruit bunch (EFB) using L9 Taguchi Orthogonal Array. Chemical Engineering Transactions, 45. pp. 1639-1644.

Dennis, J.-O. and Ahmed, A.-Y. and Khir, M.-H. (2015) Fabrication and characterization of a CMOS-MEMS humidity sensor. Sensors (Switzerland), 15 (7). pp. 16674-16687.

Dennis, J.O. and Ahmad, F. and Md Khir, M.B. and Hamid, N.H.B. (2015) Optical characterization of lorentz force based CMOS-MEMS magnetic field sensor. Sensors (Switzerland), 15 (8). pp. 18256-18269.

Dennis, J.-O. and Ahmed, A.-Y. and Khir, M.-H. (2015) Fabrication and characterization of a CMOS-MEMS humidity sensor. Sensors (Switzerland), 15 (7). pp. 16674-16687.

Dutta, A. and Banerjee, P. and Sarkar, D. and Bhattacharjee, S. and Chakrabarti, S. (2015) Degradation of Trypan Blue in wastewater by sunlight-assisted modified photo-Fenton reaction. Desalination and Water Treatment, 56 (6). pp. 1498-1506.

Dennis, J.O. and Rabih, A.A.S. and Md Khir, M.H. and Abdullah, M.A. and Ahmed, M.G.A. (2015) Review on exhaled hydrogen peroxide as a potential biomarker for diagnosis of inflammatory lung diseases. Journal of Biomimetics, Biomaterials and Biomedical Engineering, 22. pp. 77-87.

Dewangan, S. and Gangopadhyay, S. and Biswas, C.K. (2015) Study of surface integrity and dimensional accuracy in EDM using Fuzzy TOPSIS and sensitivity analysis. Measurement: Journal of the International Measurement Confederation, 63. pp. 364-376.

E

Elkhalifah, Ali EI and Bustam, M Azmi and Shariff, AM and Murugesan, T (2015) Selective adsorption of CO2 on a regenerable amine-bentonite hybrid adsorbent. Applied Clay Science, 107. pp. 213-219.

Endut, M.N.A.-A. and Nur Arfah, A.S. (2015) The islamic epistemological element of Al-Yaqin in critical thinking. Pertanika Journal of Social Sciences and Humanities, 23 (August). pp. 91-102.

Ezechi, E.H. and Hasnain Isa, M. and Kutty, S.R.B.M. and Ahmed, Z. (2015) Electrochemical removal of boron from produced water and recovery. Journal of Environmental Chemical Engineering, 3 (3). pp. 1962-1973.

Ee, L.K. and Zamin, N. and Aziz, I.A. and Haron, N.S. and Mehat, M. and Ismail, N.N. (2015) Bedrunn3R: An intelligent running alarm clock. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17890-17898.

Eisakhani, M. and Abdullah, M.P. and Karim, O.A. and Malakahmad, A. (2015) Best management practices for water quality improvement of Bertam River, Malaysia. International Journal of Applied Engineering Research, 10 (2). pp. 3923-3935.

Ezechi, E.H. and Kutty, S.R.B.M. and Malakahmad, A. and Isa, M.H. (2015) Characterization and optimization of effluent dye removal using a new low cost adsorbent: Equilibrium, kinetics and thermodynamic study. Process Safety and Environmental Protection, 98. pp. 16-32.

Elraies, K.A. and Kalwar, S.A. and Ayoub, M.A. and Belhaj, H.A. (2015) Experimental investigation of alkali-surfactant-polymer flooding forcarbonate reservoirs. International Journal of Applied Engineering Research, 10 (11). pp. 28401-28410.

F

Farnam, Marjan and Mukhtar, Hilmi and Shariff, Azmi (2015) Investigation of optimum drying conditions for pure PES membranes for gas separation. Adv Environ Biol, 9 (27). pp. 326-331.

Farooq, M.U. and Ali, A. and Qayyum, A. and Naz, M.Y. and Khan, Y. and Shukrullah, S. and Ghaffar, C.A. (2015) Time function triple Langmuir probe measurements in low frequency pulsed DC discharge plasma. High Energy Chemistry, 49 (4). pp. 286-293.

Fuddoly, A. and Jaafar, J. and Zamin, N. (2015) News classification with human annotators: A case study. Jurnal Teknologi, 74 (10). pp. 21-28.

Fujita, M. and LÃ©vÃªque, J.-M. and Komatsu, N. and Kimura, T. (2015) Sono-bromination of aromatic compounds based on the ultrasonic advanced oxidation processes. Ultrasonics Sonochemistry, 27. pp. 247-251.

Fuddoly, A. and Jaafar, J. and Zamin, N. (2015) News classification with human annotators: A case study. Jurnal Teknologi, 74 (10). pp. 21-28.

Firmansyah and Aziz, A.R.A. (2015) Investigation of auto-ignition of octane-CNG mixture in HCCI engine. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2235-2242.

Financie, Revie and Moniruzzaman, Muhammad and Uemura, Yoshimitsu (2015) Characterization of Empty Fruit Bunch Treated with Ionic Liquid Prior to Enzymatic Delignification. Jurnal Rekayasa Kimia & Lingkungan, 10 (4). pp. 165-170.

G

Garg, Sahil and Shariff, Azmi Mohd and Shaikh, MS and Lal, Bhajan and Aftab, Asma and Faiqa, Nor (2015) A neural network approach to predict the density of aqueous MEA solution. Australian Journal of Basic and Applied Sciences, 9. pp. 415-422.

Getu, Mesfin and Mahadzir, Shuhaimi and Samyudia, Yudi and Khan, Mohd Shariq and Bahadori, Alireza and Lee, Moonyong (2015) Risk-based optimization for representative natural gas liquid (NGL) recovery processes by considering uncertainty from the plant inlet. Journal of Natural Gas Science and Engineering, 27. pp. 42-54.

Goh Thian Lai, Abdul Ghani Rafek, Ailie Sofyiana Serasa, Norbert, . (2015) Correlation of ultrasonic velocity slowness with uniaxial compressive strength of schists in Malaysia. Correlation of ultrasonic velocity slowness with uniaxial compressive strength of schists in Malaysia.

Gardezi, S.S.S. and Shafiq, N. and Abdullah, N.A.W. and Khamidi, M.F. and Farhan, S.A. (2015) Minimization of embodied carbon footprint from housing sector of Malaysia. Chemical Engineering Transactions, 45. pp. 1927-1932.

Gonfa, G. and Bustam, M.A. and Sharif, A.M. and Mohamad, N. and Ullah, S. (2015) Tuning ionic liquids for natural gas dehydration using COSMO-RS methodology. Journal of Natural Gas Science and Engineering, 27. pp. 1141-1148.

Ganesan, T. and Elamvazuthi, I. and Vasant, P. (2015) Multiobjective design optimization of a nano-CMOS voltage-controlled oscillator using game theoretic-differential evolution. Applied Soft Computing Journal, 32. pp. 293-299.

Gilassi, S. and Rahmanian, N. (2015) Mathematical modelling and numerical simulation of CO2/CH4 separation in a polymeric membrane. Applied Mathematical Modelling, 39 (21). pp. 6599-6611.

Ghanem, O.B. and Mutalib, M. and El-Harbawi, M. and Gonfa, G. and Kait, C.F. and Alitheen, N.B.M. and LÃ©vÃªque, J.-M. (2015) Effect of imidazolium-based ionic liquids on bacterial growth inhibition investigated via experimental and QSAR modelling studies. Journal of Hazardous Materials, 297. pp. 198-206.

Gholami, Z. and Abdullah, A.Z. and Lee, K.T. (2015) Catalytic Etherification of Glycerol to Diglycerol Over Heterogeneous Calcium-Based Mixed-Oxide Catalyst: Reusability and Stability. Chemical Engineering Communications, 202 (10). pp. 1397-1405.

Getu, M. and Mahadzir, S. and Samyudia, Y. and Khan, M.S. and Bahadori, A. and Lee, M. (2015) Risk-based optimization for representative natural gas liquid (NGL) recovery processes by considering uncertainty from the plant inlet. Journal of Natural Gas Science and Engineering, 27. pp. 42-54.

Gilani, S.F.-H. and Gilani, S.I.-H. and Baharudin, Z. and Ibrahim, R. (2015) Development of energy harvesting system using rotation mechanism of a revolving door. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10159-10163.

Gitan, A.A. and Abdulmalek, S.H. and Dihrab, S.S. (2015) Tracking collector consideration of tilted collector solar updraft tower power plant under Malaysia climate conditions. Energy, 93. pp. 1467-1477.

Gonfa, G. and Bustam, M.A. and Muhammad, N. and Khan, A.S. (2015) Evaluation of Thermophysical Properties of Functionalized Imidazolium Thiocyanate Based Ionic Liquids. Industrial and Engineering Chemistry Research, 54 (49). pp. 12428-12437.

Gasim, H. and Megat, A.R.M.M.A. and Shamsul, R.M.K. (2015) Treatment of petroleum refinery wastewater using extended aeration activated sludge. International Journal of Engineering Research in Africa, 13. pp. 1-7.

Gillani, S.A. and Shah, P.A. and Qayyum, A. and Hasbullah, H.B. (2015) MAC layer challenges and proposed protocols for vehicular ad-hoc networks. Advances in Intelligent Systems and Computing, 306. pp. 3-13.

H

Halim, HNA and Shariff, AM and Bustam, MA (2015) High pressure CO2 absorption from natural gas using piperazine promoted 2-amino-2-methyl-1-propanol in a packed absorption column. Separation and Purification Technology, 152. pp. 87-93.

Haylay Tsegab Gebretsadik, Chow Weng Sum, Aaron W Hunter, . (2015) Preservation of Marine Chemical Signatures in Upper Devonian Carbonates of Kinta Valley, Peninsular Malaysia: Implications for Chemostratigraphy. Preservation of Marine Chemical Signatures in Upper Devonian Carbonates of Kinta Valley, Peninsular Malaysia: Implications for Chemostratigraphy.

Hegde, G. and Abdul Manaf, S.A. and Kumar, A. and Ali, G.A.M. and Chong, K.F. and Ngaini, Z. and Sharma, K.V. (2015) Biowaste Sago Bark Based Catalyst Free Carbon Nanospheres: Waste to Wealth Approach. ACS Sustainable Chemistry and Engineering, 3 (9). pp. 2247-2253.

Ho, W.S. and Khor, C.S. and Hashim, H. and Lim, J.S. and Ashina, S. and Herran, D.S. (2015) Optimal operation of a distributed energy generation system for a sustainable palm oil-based eco-community. Clean Technologies and Environmental Policy, 17 (6). pp. 1597-1617.

Halim, H.N.A. and Shariff, A.M. and Bustam, M.A. (2015) High pressure CO2 absorption from natural gas using piperazine promoted 2-amino-2-methyl-1-propanol in a packed absorption column. Separation and Purification Technology, 152. pp. 87-93.

Haleem, A.A. and Hashim, H. and Varbanov, P.S. and Yong, J.Y. and KlemeÅ¡, J.J. and Yusup, S. (2015) Case study: Optimisation of Federal Land Development Authority Jengka supply chain management using P-graph approach. Chemical Engineering Transactions, 45. pp. 1375-1380.

Hamizol, M.S. and Megat-Yusoff, P.S.M. (2015) Tensile strength of single continuous fiber extracted from mengkuang leaves. Jurnal Teknologi, 76 (3). pp. 101-107.

Harun, N.Y. and Afzal, M.T. (2015) Combustion behavior and thermal analysis of agricultural and woody biomass blends. Advances in Environmental Biology, 9 (15). pp. 34-40.

Hani, A.F.M. and Kumar, D. and Malik, A.S. and Ahmad, R.M.K.R. and Razak, R. and Kiflie, A. (2015) Non-invasive and in vivo assessment of osteoarthritic articular cartilage: A review on MRI investigations. Rheumatology International, 35 (1).

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. (2015) Investigation of deposit formation in direct-injection spark-ignition engine powered on syngas. International Journal of Automotive Technology, 16 (3). pp. 479-485.

Hassan, R. and Marimuthu, M. and Johl, S.K. (2015) Ethnic diversity on boards and market performance: An empirical investigation in Malaysia. Advanced Science Letters, 21 (5). pp. 1099-1103.

Hassan, K. and Abdullah, A. (2015) Modeling the economic impacts of oil production in sudan: An empirical analysis for productive sectors. Advanced Science Letters, 21 (6). pp. 2166-2168.

Hani, A.M. and Feng, Y.X. and Tang, T.B. and Kiguchi, M. (2015) The effect of working memory load on prefrontal cortex activation: An optical topography study. ARPN Journal of Engineering and Applied Sciences, 10 (20). pp. 9846-9852.

Hendriana, D. and Firmansyah, T. and Setiawan, J.D. and Garinto, D. (2015) Design and optimization of low speed horizontal-axis wind turbine using OpenFOAM. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10264-10274.

Hasan, K.N.M. and Mohamad, A.S. (2015) Modeling and simulation of modal analysis-based technique on UTP distribution network for evaluating harmonic resonances. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10255-10263.

Hassan, N.H. and Arshad, N.I. and Mustapha, E.E. (2015) A preliminary study on learning orientation, information technology infrastructure flexibility and agility. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17816-17823.

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. (2015) Methane enrichment of syngas (H2/CO) in a spark-ignition directinjection engine: Combustion, performance and emissions comparison with syngas and Compressed Natural Gas. Energy, 90. pp. 2006-2015.

Hakro, M.R. and Harahap, I.S.H. (2015) Flume experiments for investigation of rainfall-induced slope failure. International Journal of Engineering Research in Africa, 16. pp. 49-56.

Hussain, A. and Abolaban, F. and Khubaib, S.M. and Mubin, S. and Ahmed, I. (2015) Steady state and transient thermalhydraulic analysis of PHWR using COBRA-3C/RERTR. Iranian Journal of Science and Technology - Transactions of Mechanical Engineering, 39. pp. 233-242.

Hamizol, M.S. and Megat-Yusoff, P.S.M. (2015) Tensile strength of single continuous fiber extracted from mengkuang leaves. Jurnal Teknologi, 76 (3). pp. 101-107.

Hosseini, S.N. and Shuker, M.T. and Hosseini, Z. and Joao Tomocene, T. and Shabib-asl, A. and Sabet, M. (2015) The role of salinity and brine ions in interfacial tension reduction while using surfactant for enhanced oil recovery. Research Journal of Applied Sciences, Engineering and Technology, 9 (9). pp. 722-726.

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. (2015) A new meshless local B-spline basis functions-FD method for two-dimensional heat conduction problems. International Journal of Numerical Methods for Heat and Fluid Flow, 25 (2). pp. 225-251.

Hamzah, H.I. and Jung, L.T. and Mutalib, A.A. (2015) Prevention of digital music file duplication. ARPN Journal of Engineering and Applied Sciences, 10 (2). pp. 427-435.

Hanita, D. and Nurul Fauzana, I.G. and Nursyarizal, M.N. and Taib, I. (2015) A zigbee-based continuous online vital sign monitoring system. ARPN Journal of Engineering and Applied Sciences, 10 (2). pp. 391-395.

Hassan, S. and Khosravi, A. and Jaafar, J. (2015) Examining performance of aggregation algorithms for neural network-based electricity demand forecasting. International Journal of Electrical Power and Energy Systems, 64. pp. 1098-1105.

Harun, N.Y. and Afzal, M.T. (2015) Chemical and mechanical properties of pellets made from agricultural and woody biomass blends. Transactions of the ASABE, 58 (4). pp. 921-930.

Hamizol, M.S. and Megat-Yusoff, P.S.M. (2015) Tensile strength of single continuous fiber extracted from mengkuang leaves. Jurnal Teknologi, 76 (3). pp. 101-107.

Hong, B.Z. and Keong, L.K. and Shariff, A.M. (2015) Modelling of Bubble Growth in Supersaturated Solution using Computational Fluid Dynamics-Population Balance Model (CFD-PBM) Approach. Defect and Diffusion Forum, 362. pp. 200-208.

Hani, AM and Feng, Ying Xing and Tang, Tong Boon and Kiguchi, Masashi (2015) The effect of working memory load on prefrontal cortex activation: An optical topography study. ARPN Journal of Engineering and Applied Sciences, 10 (20). pp. 9846-9852.

I

irshad, kashif and Habib, Khairul and basrawi, firdaus and Nagarajan, T and saidur, R and Saha, Bidyut B. (2015) Thermal comfort study of a building equipped with thermoelectric air duct system for tropical climate. Applied Thermal Engineering, 91. pp. 1141-1155. ISSN 13594311

irshad, kashif and Habib, Khairul and Nagarajan, T and Saha, Bidyut B. (2015) Performance analysis of a thermoelectric air duct system for energy-efficient buildings. Energy , 91. pp. 1009-1017. ISSN 3605442

Imam, A.A. and Basri, S. and Ahmad, R. (2015) Data synchronization between mobile devices and server-side databases: A systematic literature review. Journal of Theoretical and Applied Information Technology, 81 (2). pp. 364-382.

Ibrahim, F. and Moniruzzaman, M. and Yusup, S. and Uemura, Y. (2015) Dissolution of cellulose with ionic liquid in pressurized cell. Journal of Molecular Liquids, 211. pp. 370-372.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Hung, N.T. and Magzoub, M.A. (2015) Analysis of Bearing Surface Roughness Defects in Induction Motors. Journal of Failure Analysis and Prevention, 15 (5). pp. 730-736.

Imran, M. and Liew, M.S. and Nasif, M.S. (2015) Experimental studies on fire for offshore structures and its limitations: A review. Chemical Engineering Transactions, 45. pp. 1951-1956.

Ibrahim, N. and Wan Ahmad, W.F. and Shafie, A. (2015) Multimedia mobile learning application for childrenâ��s education: The development of MFolktales. Asian Social Science, 11 (24). pp. 203-215.

Ismail, A. and Lee, Y.C. and Tammam, M. (2015) Elastic scattering analysis of p+40 Ca at incident energies from threshold to 48.4 MeV and nuclear matter radius. International Journal of Modern Physics E, 24 (7).

Inayat, A. and Ahmad, M.M. and Mutalib, M.I.A. and Yusup, S. and Khan, Z. (2015) MINLP optimization for heat integration of bio-hydrogen production from palm waste. Journal of Engineering Science and Technology, 10 (Spec.i). pp. 50-60.

Islam, B. and Baharudin, Z. and Nallagownden, P. (2015) Effect of input variables selection on energy demand prediction based on intelligent hybrid neural networks. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10228-10235.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. (2015) An on-line condition monitoring system for induction motors via instantaneous power analysis. Journal of Mechanical Science and Technology, 29 (4). pp. 1483-1492.

Irshad, K. and Habib, K. and Thirumalaiswamy, N. and Saha, B.B. (2015) Performance analysis of a thermoelectric air duct system for energy-efficient buildings. Energy, 91. pp. 1009-1017.

Irshad, K. and Habib, K. and Basrawi, F. and Thirumalaiswamy, N. and Saidur, R. and Saha, B.B. (2015) Thermal comfort study of a building equipped with thermoelectric air duct system for tropical climate. Applied Thermal Engineering, 91. pp. 1141-1155.

Ishmanov, F. and Malik, A.S. and Kim, S.W. and Begalov, B. (2015) Trust management system in wireless sensor networks: Design considerations and research challenges. Transactions on Emerging Telecommunications Technologies, 26 (2). pp. 107-130.

Isa, M.H. (2015) Simulated textile dye wastewater treatment by electrochemical oxidation: application of response surface methodology (RSM). Desalination and Water Treatment, 53 (8). pp. 2260-2265.

Imam, A.A. and Basri, S.B. and Ahmad, R.B. (2015) Synchronization algorithm for remote heterogeneous database environment. Advances in Intelligent Systems and Computing, 349. pp. 55-65.

Ibrahim, Farouk and Moniruzzaman, Muhammad and Yusup, Suzana and Uemura, Yoshimitsu (2015) Dissolution of cellulose with ionic liquid in pressurized cell. Journal of Molecular Liquids, 211. pp. 370-372.

Isa Ali, Md and Shahrir, A and Faizal, WM and Iskandar, MT (2015) The use of untreated waste cooking oil and diesel fuel blends as IC engine fuels. Applied Mechanics and Materials, 699. pp. 708-713.

J

JAMALUDIN SITI NUR SAKINAH, . (2015) A parametric study on design and characteristics of stepwise-built functionally graded Hydroxyapatite/Titanium. A parametric study on design and characteristics of stepwise-built functionally graded Hydroxyapatite/Titanium.

Jahan, S. and Sakidin, H. (2015) Influence of heat transfer on the MHD stagnation point flow of a power law fluid with convective boundary condition. Jurnal Teknologi, 77 (20). pp. 53-59.

Javaid, N. and Ahmad, A. and Nadeem, Q. and Imran, M. and Haider, N. (2015) iM-SIMPLE: iMproved stable increased-throughput multi-hop link efficient routing protocol for Wireless Body Area Networks. Computers in Human Behavior, 51. pp. 1003-1011.

Jebaraj, S. and Srinivasa Rao, P. (2015) High-efficiency solar oven for tropical countries. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10213-10217.

Johnson, O.A. and Madzlan, N. and Kamaruddin, I. (2015) Encapsulation of petroleum sludge in building blocks. Construction and Building Materials, 78. pp. 281-288.

Japper-Jaafar, A. and Bhaskoro, P.T. and Sean, L.L. and Sariman, M.Z. and Nugroho, H. (2015) Yield stress measurement of gelled waxy crude oil: Gap size requirement. Journal of Non-Newtonian Fluid Mechanics, 218. pp. 71-82.

Jahan, S. and Sakidin, H. (2015) Influence of heat transfer on the MHD stagnation point flow of a power law fluid with convective boundary condition. Jurnal Teknologi, 77 (20). pp. 53-59.

Johnson, O.A. and Madzlan, N. and Kamaruddin, I. and Oloruntobi, O.O. (2015) Building blocks from petroleum sludge: Leachability and toxicity studies. International Journal of Applied Engineering Research, 10 (24). pp. 45479-45481.

Jaafar, J. and Janjua, U.I. and Lai, F.W. (2015) Software effective risk management: An evaluation of risk management process models and standards. Lecture Notes in Electrical Engineering, 339. pp. 837-844.

K

Kou, Lili and Ma, Zongmin and Li, Yan Jun and Naitoh, Yoshitaka and Komiyama, Masaharu and Sugawara, Yasuhiro (2015) Surface potential imaging with atomic resolution by frequency-modulation Kelvin probe force microscopy without bias voltage feedback. Nanotechnology, 26 (19). p. 195701.

Khan, M Irfan and Azizli, Khairun and Sufian, Suriati and Man, Zakaria (2015) Sodium silicate-free geopolymers as coating materials: Effects of Na/Al and water/solid ratios on adhesion strength. Ceramics International, 41 (2). pp. 2794-2805.

Khan, M Irfan and Min, Teoh K and Azizli, Khairun and Sufian, Suriati and Ullah, Hafeez and Man, Zakaria (2015) Effective removal of methylene blue from water using phosphoric acid based geopolymers: synthesis, characterizations and adsorption studies. RSC advances, 5 (75). pp. 61410-61420.

Kamaruddin, B and Zabiri, H (2015) Investigating the performance of Mixed Integer Quadratic Programming (MIQP)-based Model Predictive Control (MPC) for Control Valve Stiction Compensation.

Kareem, M. W. and Habib, Khairul and irshad, kashif (2015) TRANSIENT MODELLING OF MULTI-PASS SOLAR THERMAL COLLECTOR WITH SENSIBLE ENERGY STORING MATRIX. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10200-10205. ISSN 1819-6608

Khan, Muhammad Burhan and Lee, Xue Yong and Nisar, Humaira and Ng, Choon Aun and Yeap, Kim Ho and Malik, Aamir Saeed (2015) Digital Image Processing and Analysis for Activated Sludge Wastewater Treatment. Advances in Experimental Medicine and Biology.

Khairul Arifin Mohd Noh, Zuhar Zahir Tuan Harith, Abdul Halim Ab, . (2015) Hybrid Source-Receiver Geometry for Short-Spread Layout in 2D Seismic Reflection Acquisition. Hybrid Source-Receiver Geometry for Short-Spread Layout in 2D Seismic Reflection Acquisition.

Khairul Arifin Mohd Noh, Muhammad Hasif Syazwan Shamsul, Mohd Mo, . (2015) Structural Analysis of Bukit Bunuh Impact Crater using Transient Electromagnetic Method. Structural Analysis of Bukit Bunuh Impact Crater using Transient Electromagnetic Method.

Kurian, V.J. and Ng, C.Y. and Liew, M.S. (2015) A numerical and experimental study on motion responses of semi-submersible platforms subjected to short-crested waves. Journal of Vibration Engineering and Technologies, 3 (3). pp. 331-344.

Khan, Z. and Inayat, A. and Yusup, S. and Ahmad, M.M. (2015) Kinetic parameters determination using optimization approach in integrated catalytic adsorption steam gasification for hydrogen production. International Journal of Hydrogen Energy, 40 (29). pp. 8824-8832.

Kurnia, K.A. and Lima, F. and ClÃ¡udio, A.F.M. and Coutinho, J.A.P. and Freire, M.G. (2015) Hydrogen-bond acidity of ionic liquids: an extended scale. Physical Chemistry Chemical Physics, 17 (29). pp. 18980-18990.

Kurnia, J.C. and Sasmito, A.P. and Hassani, F.P. and Mujumdar, A.S. (2015) Introduction and evaluation of a novel hybrid brattice for improved dust control in underground mining faces: A computational study. International Journal of Mining Science and Technology, 25 (4). pp. 537-543.

Kamal, S. and Sharma, K.V. and Jayaganthan, R. and Prakash, S. (2015) Hot corrosion behavior of thermal spray coatings on superalloy in coal-fired boiler environment. Journal of Materials Research, 30 (18). pp. 2829-2843.

Kulsi, C. and Mitra, M. and Kargupta, K. and Ganguly, S. and Banerjee, D. and Goswami, S. (2015) Effect of different surfactants and thicknesses on electrodeposited films of bismuth telluride and its thermoelectric performance. Materials Research Express, 2 (10).

Kaewanuchit, C. and Muntaner, C. and Isha, N. (2015) A causal relationship of occupational stress among university employees. Iranian Journal of Public Health, 44 (7). pp. 931-938.

Khan, W.Z. and Aalsalem, M.Y. and Saad, N.M. (2015) Distributed clone detection in static Wireless Sensor Networks: Random Walk with Network Division. PLoS ONE, 10 (5).

Khan, Z. and Razali, R.B. and Daud, H. and Nor, N.M. and Firuzabad, M.F. (2015) The largest studentized residual test for bad data identification in state estimation of a power system. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10184-10191.

Kannan, R. and Shanmuga Priyan, S. and Setiawan, J.D. (2015) Experimental verification of multilevel inverter with MPPT based solar energy. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10236-10244.

Khan, M.Y. and Abdul Karim, Z.A. and Aziz, A.R.A. and Tan, I.M. (2015) A case study on preparation, stability and physical properties of water in diesel emulsion. ARPN Journal of Engineering and Applied Sciences, 10 (22). pp. 17289-17293.

Kim, D.K. and Choi, H.S. and Shin, C.S. and Liew, M.S. and Yu, S.Y. and Park, K.S. (2015) Fatigue performance of deepwater SCR under short-term VIV considering various S-N curves. Structural Engineering and Mechanics, 53 (5). pp. 881-896.

Kheradmand, M. and Castro-Gomes, J. and Azenha, M. and Silva, P.D. and De Aguiar, J.L.B. and Zoorob, S.E. (2015) Assessing the feasibility of impregnating phase change materials in lightweight aggregate for development of thermal energy storage systems. Construction and Building Materials, 89. pp. 48-59.

Khoa, T.H. and Vasant, P.M. and Balbir Singh, M.S. and Dieu, V.N. (2015) Solving economic dispatch problem with valve-point effects using swarm-based meanâ��variance mapping optimization (MVMOS). Cogent Engineering, 2 (1).

Khan, A.M. and Jeoti, V. (2015) On time-domain OFDM channel estimation: Use of pilots correlation for digital video broadcasting (DVB) cable receiver. Optoelectronics and Advanced Materials, Rapid Communications, 9 (5-6). pp. 891-897.

Kurian, V.J. and Goh, S.S. and Wahab, M.M.A. and Liew, M.S. (2015) Component reliability assessment of offshore jacket platforms. Research Journal of Applied Sciences, Engineering and Technology, 9 (1). pp. 1-10.

Kurian, V.J. and Ng, C.Y. and Liew, M.S. (2015) An experimental investigation of the responses of classic spar platform subjected to bi-directional waves. Research Journal of Applied Sciences, Engineering and Technology, 9 (1). pp. 11-17.

Khan, A.M. and Jeoti, V. and Azman Zakariya, M. (2015) Pilot based pre FFT signal to noise ratio estimation for OFDM systems in Rayleigh-fading channel. Lecture Notes in Electrical Engineering, 315. pp. 171-182.

Khan, R.A. and Liew, M.S. and Zawawi, N.A.W.A. (2015) Impulse response analysis for Malaysian construction sector by vector error correction model. Malaysian Construction Research Journal, 16 (1). pp. 1-14.

Kutty, S.R.M. and Yoong, L.S. and Khun, T.C. (2015) Growth performance, waste reduction and efficiency of conversion of digested food waste by Hermetia illucens larvae via bioconversion. Journal of Pure and Applied Microbiology, 9 (Specia). pp. 533-537.

Khan, M.A. and Ali, Z. and Dennis, L.C.C. and Khan, I. and Islam, S. and Ullah, M. and Gul, T. (2015) Stability analysis of an SVIR epidemic model with non-linear saturated incidence rate. Applied Mathematical Sciences, 9 (21-24). pp. 1145-1158.

Khan, M.A. and Ali, A. and Dennis, L.C.C. and Islam, S. and Khan, I. and Ullah, M. and Gul, T. (2015) Dynamical behavior of cholera epidemic model with non-linear incidence rate. Applied Mathematical Sciences, 9 (17-20). pp. 989-1002.

L

Lai, Li Sze and Yeong, Yin Fong and Lau, Kok Keong and Shariff, Azmi Mohd (2015) CO 2 and CH 4 permeation through zeolitic imidazolate framework (ZIF)-8 membrane synthesized via in situ layer-by-layer growth: An experimental and modeling study. Rsc Advances, 5 (96). pp. 79098-79106.

Lock, Serene Sow Mu and Lau, Kok Keon and Ahmad, Faizan and Shariff, AM (2015) Modeling, simulation and economic analysis of CO2 capture from natural gas using cocurrent, countercurrent and radial crossflow hollow fiber membrane. International Journal of Greenhouse Gas Control, 36. pp. 114-134.

Lock, SSM and Lau, KK and Shariff, AM (2015) Effect of recycle ratio on the cost of natural gas processing in countercurrent hollow fiber membrane system. Journal of Industrial and Engineering Chemistry, 21. pp. 542-551.

Lam, Duong Bich Ngoc and Nurlidia, Mansor and Shuhaimi, Mahadzir and Muhamad, Fazizi Adenan and Billyianto, Among Bato and others (2015) Growth and lipid compositions of locally isolated microalgae. Journal of Applied Sciences, 15 (3). pp. 598-601.

Le, Si NT and Nguyen, Khanh V and Mahadzir, Shuhaimi B and Chen, C-L (2015) Applying exergy analysis for simulation and optimization of the iso-butane recovery process from liquefied petroleum gas. Chemical Engineering Transactions, 45. pp. 619-624.

Leong, S.Y. and Kutty, S.R.M. and Tan, C.K. and Tey, L.H. (2015) Comparative study on the effect of organic waste on lauric acid produced by hermetia illucens larvae via bioconversion. Journal of Engineering Science and Technology, 10 (Spec. ). pp. 52-63.

Lethesh, K.C. and Shah, S.N. and Mutalib, M.I.A. (2015) Synthesis, characterization, physical and thermodynamic properties of diazobicyclo undecene based dicyanamide ionic liquids. Journal of Molecular Liquids, 208. pp. 253-258.

Le, S.N.T. and Nguyen, K.V. and Mahadzir, S.B. and Chen, C.-L. (2015) Applying exergy analysis for simulation and optimization of the iso-butane recovery process from liquefied petroleum gas. Chemical Engineering Transactions, 45. pp. 619-624.

Liew, M.S. and Nordin, A.H. and Lim, E.S. and Zawawi, N.A.W.A. (2015) Wave energy spectrum for the south China sea. Marine Technology, 52 (3). pp. 15-18.

Liew, M.S. and Zawawi, N.A.W.A. (2015) The decommissioning challenge. Marine Technology, 52 (3). pp. 50-54.

Lim, C.H. and Mohammed, I.Y. and Abakr, Y.A. and Kazi, F.K. and Yusup, S. and Lam, H.L. (2015) Element characteristic tolerance for semi-batch fixed bed biomass pyrolysis. Chemical Engineering Transactions, 45. pp. 1285-1290.

Lieu, T. and Yusup, S. and Moniruzzaman, M. (2015) Parametric study of esterification of free fatty acids derived from Ceiba Pentandra seed oil using microwaveassisted technique via response surface methodology. Chemical Engineering Transactions, 45. pp. 931-936.

Lai, L.S. and Yeong, Y.F. and Lau, K.K. and Shariff, A.M. (2015) CO2 and CH4 permeation through zeolitic imidazolate framework (ZIF)-8 membrane synthesized via in situ layer-by-layer growth: an experimental and modeling study. RSC Advances, 5 (96). pp. 79098-79106.

Langove, N. and Isha, A.S.N. and Javaid, M.U. (2015) Time pressure, employee well-being, perceived organizational support and turnover intention of information technology executives in Malaysia: A proposed conceptual framework. Advanced Science Letters, 21 (6). pp. 1898-1901.

Lubis, A.M.H.S. and Ariwahjoedi, B. and Sudin, M.B. (2015) Investigation on oxidation and thermal stability of jatropha oil. Jurnal Teknologi, 77 (21). pp. 79-83.

Lock, S.S.M. and Lau, K.K. and Ahmad, F. and Shariff, A.M. (2015) Modeling, simulation and economic analysis of CO2 capture from natural gas using cocurrent, countercurrent and radial crossflow hollow fiber membrane. International Journal of Greenhouse Gas Control, 36. pp. 114-134.

Liew, M.S. and Nordin, A.H. and Lim, E.S. and Zawawi, N.A.W.A. (2015) Wave energy spectrum for the south China sea. Marine Technology, 52 (3). pp. 15-18.

Liew, M.S. and Zawawi, N.A.W.A. (2015) The decommissioning challenge. Marine Technology, 52 (3). pp. 50-54.

Laghari, S.M. and Isa, M.H. and Laghari, A.J. (2015) Delignification of coconut husk by microwave assisted chemical pretreatment. Advances in Environmental Biology, 9 (1). pp. 1-5.

Lieu, Thanh and Yusup, Suzana and Moniruzzaman, Muhammad (2015) Parametric study of esterification of free fatty acids derived from Ceiba Pentandra seed oil using microwaveassisted technique via response surface methodology. Chemical Engineering Transactions, 45. pp. 931-936.

M

Malik, Aamir Saeed and Amin, Hafeez Ullah and Badruddin , Nasreen and Kamel, Nidal S. and Ahmad, Rana Fayyaz and Mumtaz, Wajid (2015) Evaluation of Stereoscopic 3D Based Educational Contents for Long-Term Memorization. Annals of Neurology.

M Nizarul, M. Hermana, Yasir Bashir, Deva Ghosh, . (2015) Improving thin bed identification in Sarawak Basin Field using short time fourier transform half cepstrum (STFTHC) methos. Improving thin bed identification in Sarawak Basin Field using short time fourier transform half cepstrum (STFTHC) methos.

Mumtaz, Wajid and Malik, Aamir Saeed and Mohd Yasin, Mohd Azhar and Xia, Likun (2015) Review on EEG and ERP predictive biomarkers for major depressive disorder. Biomedical Signal Processing and Control.

Malik, Aamir Saeed and Raja Khairuddin, Raja Nur Hamizah and Amin, Hafeez Ullah and Smith, Mark Llewellyn and Kamel , Nidal and Abdullah, Jafri Malin and Fawzy, Samar Mohammad and Shim, Seongo (2015) EEG based evaluation of stereoscopic 3D displays for viewer discomfort. BioMedical Engineering Online. ISSN 1475925X

Mohamed, Shakir and Qidwai, Uvais and Malik, Aamir Saeed and Kamel , Nidal (2015) Electroencephalography Simulation Hardware for Realistic Seizure, Preseizure and Normal Mode Signal Generation. Journal of Medical Imaging and Health Informatics.

Majid, Noor Diana Abdul and Shariff, Azmi Mohd and Rusli, Risza (2015) Process Safety Management (PSM) for managing contractors in process plant. Journal of Loss Prevention in the Process Industries, 37. pp. 82-90.

Maqsood, Khuram and Mohd Shar, Azmi B and Ganguly, Saibal (2015) Synthesis of Energy Efficient Cryogenic Distillation Networks for Maximum Methane Recovery from Natural Gas with Carbon Dioxide and Heavy Hydrocarbons. Journal of Applied Sciences, 15 (3). pp. 492-499.

Mushtaq, A and Mukhtar, H and Shariff, AM (2015) Effect of MEA on the performance of polysulfone/polyvinyl acetate blend membranes. BULGARIAN CHEMICAL COMMUNICATIONS, 2. p. 584.

Mei, Irene Lock Sow and Ismail, Idris and Shafquet, Areeba and Abdullah, Bawadi (2015) Real-time monitoring and measurement of wax deposition in pipelines via non-invasive electrical capacitance tomography. Measurement Science and Technology, 27 (2). 025403.

Mahadi, Bahari and Abdullah, Bawadi and Alenazey, Feraih and Vo, Dai-Viet N (2015) Ethanol Dry Reforming for H2-Rich Syngas Production Over Ce-Ni/Al2O3 Catalyst.

Mohamed, Norani Muti and Bashiri, Robabeh and Chong, Fai Kait and Sufian, Suriati and Kakooei, Saeid (2015) Photoelectrochemical behavior of bimetallic Cu--Ni and monometallic Cu, Ni doped TiO2 for hydrogen production. international journal of hydrogen energy, 40 (40). pp. 14031-14038.

Muhammad, Mubashir and Yeong, Yin Fong and Lau, Kok Keong and Mohd Shariff, Azmi Bin (2015) Issues and challenges in the development of deca-dodecasil 3 rhombohedral membrane in CO2 capture from natural gas. Separation & Purification Reviews, 44 (4). pp. 331-340.

Mubashir, Muhammad and Fong, Yeong Yin and Keong, Lau Kok and Sharrif, Mohd Azmi Bin (2015) Synthesis and performance of deca-dodecasil 3 rhombohedral (ddr)-type zeolite membrane in CO2 separation—a review. ASEAN Journal of Chemical Engineering, 14 (2). pp. 48-57.

Mubashir, Muhammad and Yeong, Yin Fong and Nazri, Nur Syahirah Binti Mohamed and Lau, Kok Keong (2015) Accelerated synthesis of deca-dodecasil 3 rhombohedral (DDR3) zeolite crystals via hydrothermal growth coupled with ultrasonic irradiation method. RSC advances, 5 (29). pp. 22658-22664.

Mushtaq, A and Mukhtar, H and Shariff, AM (2015) Effect of MEA on the performance of polysulfone/polyvinyl acetate blend membranes. BULGARIAN CHEMICAL COMMUNICATIONS, 2. p. 584.

Mohshim, Dzeti Farhah and Mukhtar, Hilmi and Man, Zakaria (2015) Ionic Liquid Embedded in Polymeric Membrane for High Pressure CO 2 Separation. Chemical Engineering Transactions, 45. pp. 1423-1428.

Mohammadat, Mohamed Tag Elsir and Zain Ali , Noohul Basheer and Hussin, Fawnizu Azmadi and Zwolinski, Mark (2015) Resistive Open Faults Detectability Analysis and Implications for Testing Low Power Nanometric ICs. IEEE Transactions on Very Large Scale Integration (VLSI) Systems, 23 (3). pp. 580-583. ISSN 1063-8210

Mazinani, I. and Binti Ismail, Z. and Hashim, A.M. (2015) Erratum: An Overview of Tsunami Wave Force on Coastal Bridge and Open Challenges (Journal of Earthquake and Tsunami (2015) 9:2 (1550006). Journal of Earthquake and Tsunami, 9 (3).

Mohd Zaid, H.F. and Chong, F.K. and Abdul Mutalib, M.I. (2015) Photooxidative-extractive deep desulfurization of diesel using Cu-Fe/TiO2 and eutectic ionic liquid. Fuel, 156. pp. 54-62.

Mahmood, H. and Moniruzzaman, M. and Yusup, S. and Akil, H.Md. (2015) Comparison of some biocomposite board properties fabricated from lignocellulosic biomass before and after Ionic liquid pretreatment. Chemical Engineering Transactions, 45. pp. 709-714.

Munir, S. and Siddiqui, M.I. and Heikal, M. and Abdul Aziz, A.R. and de Sercey, G. (2015) Identification of dominant structures and their flow dynamics in the turbulent two-phase flow using POD technique. Journal of Mechanical Science and Technology, 29 (11). pp. 4701-4710.

Muhammad, N. and Gao, Y. and Khan, M.I. and Khan, Z. and Rahim, A. and Iqbal, F. and khan , A.S. and Iqbal, J. (2015) Effect of ionic liquid on thermo-physical properties of bamboo biomass. Wood Science and Technology, 49 (5). pp. 897-913.

Mohamed, N.M. and Bashiri, R. and Chong, F.K. and Sufian, S. and Kakooei, S. (2015) Photoelectrochemical behavior of bimetallic Cu-Ni and monometallic Cu, Ni doped TiO2 for hydrogen production. International Journal of Hydrogen Energy, 40 (40). pp. 14031-14038.

Marneni, N. and Ashraf, M. (2015) Mixed convection flow over a permeable stretching wedge in the presence of heat generation/absorption, viscous dissipation, radiation and ohmic heating. Chemical Engineering Transactions, 45. pp. 955-960.

Majidaie, S. and Onur, M. and Tan, I.M. (2015) An experimental and numerical study of chemically enhanced water alternating gas injection. Petroleum Science, 12 (3). pp. 470-482.

Mazlan, M.A.F. and Uemura, Y. and Osman, N.B. and Yusup, S. (2015) Fast pyrolysis of hardwood residues using a fixed bed drop-type pyrolyzer. Energy Conversion and Management, 98. pp. 208-214.

Mukhtar, A. and Xia, L. and Tang, T.B. (2015) Vehicle Detection Techniques for Collision Avoidance Systems: A Review. IEEE Transactions on Intelligent Transportation Systems, 16 (5). pp. 2318-2338.

Mohshim, D.F. and Mukhtar, H. and Man, Z. (2015) Ionic liquid embedded in polymeric membrane for high pressure CO2 separation. Chemical Engineering Transactions, 45. pp. 1423-1428.

Miin, C.S. and Sulaiman, S.A. and Raghavan, V.R. and Heikal, M.R. and Naz, M.Y. (2015) Hydrodynamics of multi-sized particles in stable regime of a swirling bed. Korean Journal of Chemical Engineering, 32 (11). pp. 2361-2367.

Mohammad Rozali, N.E. and Wan Alwi, S.R. and Manan, Z.A. and KlemeÅ¡, J.J. (2015) Peak-off-peak load shifting for hybrid power systems based on Power Pinch Analysis. Energy, 90. pp. 128-136.

Md Yusof, M.A. and Mahadzir, N.A. (2015) Development of mathematical model for hydraulic fracturing design. Journal of Petroleum Exploration and Production Technology, 5 (3). pp. 269-276.

Muhammad, M. and Yeong, Y.F. and Lau, K.K. and Mohd Shariff, A.B. (2015) Issues and challenges in the development of deca-dodecasil 3 rhombohedral membrane in CO2 capture from natural gas. Separation and Purification Reviews, 44 (4). pp. 331-340.

Mohtar, S.S. and Tengku Malim Busu, T.N.Z. and Md Noor, A.M. and Shaari, N. and Yusoff, N.A. and Bustam Khalil, M.A. and Abdul Mutalib, M.I. and Mat, H.B. (2015) Extraction and characterization of lignin from oil palm biomass via ionic liquid dissolution and non-toxic aluminium potassium sulfate dodecahydrate precipitation processes. Bioresource Technology, 192. pp. 212-218.

Mebrahitom Asmelash, G. and Mamat, O. and Ahmad, F. and Prasada Rao, A.K. (2015) Thermal shock and fatigue behavior of pressureless sintered Al2O3â��SiO2â��ZrO2 composites. Journal of Advanced Ceramics, 4 (3). pp. 190-198.

Mumtaz, W. and Malik, A.S. and Yasin, M.A.M. and Xia, L. (2015) Review on EEG and ERP predictive biomarkers for major depressive disorder. Biomedical Signal Processing and Control, 22. pp. 85-98.

Muhammad, N. and Man, Z. and Mutalib, M.I.A. and Bustam, M.A. and Wilfred, C.D. and Khan, A.S. and Ullah, Z. and Gonfa, G. and Nasrullah, A. (2015) Dissolution and Separation of Wood Biopolymers Using Ionic Liquids. ChemBioEng Reviews, 2 (4). pp. 257-278.

Muhammad, N.A. and Chin, J.F. and Kamarrudin, S. and Chik, M.A. and Prakash, J. (2015) Fundamental simulation studies of CONWIP in front-end wafer fabrication. Journal of Industrial and Production Engineering, 32 (4). pp. 232-246.

Mazinani, I. and Ismail, Z.B. and Hashim, A.M. (2015) An Overview of Tsunami Wave Force on Coastal Bridge and Open Challenges. Journal of Earthquake and Tsunami, 9 (2).

Mohamed, N.M. and Khatani, M. and Hamid, N.H. and Sahmer, A.Z. and Zaine, S.N.A. (2015) Performance analysis of dye solar cell with additional TiO2 layer under different light Intensities. Materials Science in Semiconductor Processing, 38. pp. 381-386.

Mahmod, M.F. and Bakar, E.A. and Othman, A.R. and Ramzi, A.R. and Goh, C.Y. (2015) Fiber glass composite laminates (FGCL) measurement using 3 axis pulse echo scanning unit. Jurnal Teknologi, 76 (1). pp. 147-155.

Mushtaq, M. and Tan, I.M. and Rashid, U. and Sagir, M. and Mumtaz, M. (2015) Effect of pH on the static adsorption of foaming surfactants on Malaysian sandstone. Arabian Journal of Geosciences, 8 (10). pp. 8539-8548.

Mat Desa, W.L.H. and Kamaruddin, S. and Nawawi, M.K.M. and Zulkepli, J. (2015) Evaluation on absenteeism effect in production line at aircraft composite manufacturer. Jurnal Teknologi, 77 (5). pp. 63-67.

Musah, A.A. and Ghazali, Z. and Isha, A.S.N. (2015) Role of temperament and communication in conflict management styles: A conceptual approach. Advanced Science Letters, 21 (6). pp. 1776-1780.

Memon, M.A. and Salleh, R. and Baharom, M.N.R. (2015) Person-organization fit and turnover intention: Conceptualizing the moderating role of social exchange ideology. Advanced Science Letters, 21 (6). pp. 2127-2129.

Muhammad, M. and Nasir, M. and Mokhtar, A.A. and Hussin, H. (2015) Continuous life cycle cost model for repairable system. Lecture Notes in Mechanical Engineering, 19. pp. 279-287.

Mokhtar, A.A. and Saari, N. and Ismail, M.C. (2015) Assessment of insulated piping system inspection using logistic regression. Lecture Notes in Mechanical Engineering, 19. pp. 265-277.

Mastor, F.A. and Aziz, I.A. and Haron, N.S. and Jaafar, J. and Ismail, N.N. and Mehat, M. (2015) Pre-flood warning system based on user mobility. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17905-17913.

Montasir, O.A. and Yenduri, A. and Kurian, V.J. (2015) Effect of mooring line configurations on the dynamic responses of truss spar platforms. Ocean Engineering, 96. pp. 161-172.

Mohammadat, M.T. and Ali, N.B.Z. and Hussin, F.A. and Zwolinski, M. (2015) Resistive open faults detectability analysis and implications for testing low power nanometric ICs. IEEE Transactions on Very Large Scale Integration (VLSI) Systems, 23 (3). pp. 580-583.

Malik, A.S. and Khairuddin, R.N.H.R. and Amin, H.U. and Smith, M.L. and Kamel, N. and Abdullah, J.M. and Fawzy, S.M. and Shim, S. (2015) EEG based evaluation of stereoscopic 3D displays for viewer discomfort. BioMedical Engineering Online, 14 (1).

Mohammad Rozali, N.E. and Wan Alwi, S.R. and Manan, Z.A. and KlemeÅ¡, J.J. (2015) Peak-off-peak load shifting for hybrid power systems based on Power Pinch Analysis. Energy, 90. pp. 128-136.

Muthuvalu, M.S. and Asirvadam, V.S. and Mashadov, G. (2015) Performance analysis of Arithmetic Mean method in determining peak junction temperature of semiconductor device. Ain Shams Engineering Journal, 6 (4). pp. 1203-1210.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Raza, M.R. (2015) Thermal conductivity of powder injection molded carbon nanotube-reinforced copper-matrix composites. International Journal of Powder Metallurgy, 51 (1). pp. 57-66.

Mei, I.L.S. and Ismail, I. and Shafquet, A. and Abdullah, B. (2015) Real-time monitoring and measurement of wax deposition in pipelines via non-invasive electrical capacitance tomography. Measurement Science and Technology, 27 (2).

Memon, A.H. and Bin Ibrahim, T. and Nallagowden, P. (2015) Design optimization of a pico linear permanent magnet generator with novel shaped magnet for wave energy conversion using finite element analysis. International Journal of Applied Engineering Research, 10 (18). pp. 39058-39065.

Mahgoub, B.K.M. and Sulaiman, S.A. and Karim, Z.A.A. (2015) Performance study of imitated syngas in a dual-fuel compression ignition diesel engine. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2282-2293.

Maharun, M. and Baharom, M.B. and Mohd, M.S. (2015) Ride comfort simulation of a vehicle equipped with semiactive steering system. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2495-2503.

Mustafa, A.T. and Al-Kayiem, H.H. and Gilani, S.I.U. (2015) Investigation and evaluation of the solar air collector model to support the solar vortex engine. ARPN Journal of Engineering and Applied Sciences, 10 (12). pp. 5309-5319.

Mohammed, I.Y. and Abakr, Y.A. and Kazi, F.K. and Yusup, S. and Alshareef, I. and Chin, S.A. (2015) Comprehensive characterization of Napier grass as a feedstock for thermochemical conversion. Energies, 8 (5). pp. 3403-3417.

Mohammed, B.S. and Ibrahim, R. and Perumal, N. and Rama Rao, K.S. (2015) Power flow control of a multi-bus/three-feeder distribution system using generalized unified power quality conditioner. Journal of Electrical Engineering and Technology, 10 (1). pp. 8-17.

Madni, T.M. and Nayan, Y. and Sulaiman, S. and Tahir, M. (2015) Comparative investigation of medical contents using desktop and tabletop technologies. Lecture Notes in Electrical Engineering, 339. pp. 225-233.

Moniruzzaman, M. and Mahmood, H. and Kamiya, N. and Yusup, S. and Goto, M. (2015) Activity and stability of enzyme immobilized with ionic liquid based polymer materials. Journal of Engineering Science and Technology, 10. pp. 60-69.

Muniandy, M. and Sulaiman, S. (2015) An exploratory study on blind usersâ�� mental model in computer accessibility. Lecture Notes in Electrical Engineering, 315. pp. 925-938.

Mukhtar, A. and Xia, L. and Tang, T.B. (2015) Vehicle Detection Techniques for Collision Avoidance Systems: A Review. IEEE Transactions on Intelligent Transportation Systems, 16 (5). pp. 2318-2338.

Mahgoub, B.K.M. and Hassan, S. and Sulaiman, S.A. (2015) Effect of varying engine parameters and syngas composition on the combustion characteristics, performance and emission of syngas-diesel dual fuel engine - A review. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7712-7718.

Memon, M.A. and Salleh, R. and Baharom, M.N.R. (2015) Linking person-job fit, person-organization fit, employee engagement and turnover intention: A three-step conceptual model. Asian Social Science, 11 (2). pp. 313-320.

Mohammed, I.Y. and Abakr, Y.A. and Kazi, F.K. and Yusuf, S. and Alshareef, I. and Chin, S.A. (2015) Pyrolysis of Napier Grass in a Fixed Bed Reactor: Effect of Operating Conditions on Product Yields and Characteristics. BioResources, 10 (4). pp. 6457-6478.

Muhammad, Y. and Norani Muti, M. and Nor Hisham, H. and Mohamed Shuaib, M.S. and Shazia, S. (2015) Growth of sub-millimeter long vertically aligned multi-walled carbon nanotubes arrays for sensing applications. Malaysian Journal of Microscopy, 11 (1). pp. 121-126.

Mohammed, I.Y. and Kazi, F.K. and Abakr, Y.A. and Yusuf, S. and Razzaque, M.A. (2015) Novel method for the determination of water content and higher heating value of pyrolysis oil. BioResources, 10 (2). pp. 2681-2690.

Madani, T. and Tahir, M. and Ziauddin, S. and Raza, S. and Ahmed, M. and Khan, M. and Ashraf, M. (2015) An accelerometer-based approach to evaluate 3D unistroke gestures. International Arab Journal of Information Technology, 12 (4). pp. 389-394.

Martins, M.A.R. and Neves, C.M.S.S. and Kurnia, K.A. and Carvalho, P.J. and Rocha, M.A.A. and Santos, L.M.N.B.F. and Pinho, S.P. and Freire, M.G. (2015) Densities, viscosities and derived thermophysical properties of water-saturated imidazolium-based ionic liquids. Fluid Phase Equilibria, 407. pp. 188-196.

Manaf, S.A.A. and Roy, P. and Sharma, K.V. and Ngaini, Z. and Malgras, V. and Aldalbahi, A. and Alshehri, S.M. and Yamauchi, Y. and Hegde, G. (2015) Catalyst-free synthesis of carbon nanospheres for potential biomedical applications: Waste to wealth approach. RSC Advances, 5 (31). pp. 24528-24533.

Mohammed, Bashar S and Fadhil Nuruddin, Muhd and bt Mohd Azizli, Khairun Azizi and Ku Shaari, Ku Zilati (2015) Geopolymer steel slag brick. Applied Mechanics and Materials, 754. pp. 296-299.

Muhammad, Ibrahim Dauda and Awang, Mokhtar and Mamat, Othman and Shaari, Ku Zilati Ku (2015) Estimating Youngâ��s modulus of single-walled zirconia nanotubes using nonlinear finite element modeling. Journal of Nanomaterials, 16 (1). p. 8.

Moniruzzaman, Md and Islam, Md Saiful and Chandra, Shuvodip and Koli, Anar and Hassan, Mirza Jahid (2015) Tuberculosis and Deep Venous Thrombosis, a rare complication of a common disease: A case report. KYAMC Journal, 6 (1). pp. 598-600.

Mandal, Pradip Chandra and Abdalla, Mohamed A and Moniruzzaman, MD (2015) Acidity reduction of naphthenic acid using imidazolium chloride based ionic liquids. International Journal of Applied Engineering Research, 10 (89). pp. 69-74.

Moniruzzaman, M and Ono, T and Bustam, M Azmi and Yusup, S and Uemura, Y and others (2015) Pretreatment of wood biomass with ionic liquids: a" green" approach to separate cellulose for use in oilfield application. Journal of Applied Sciences, 15 (3). pp. 531-537.

Mahmood, Hamayoun and Moniruzzaman, Muhammad and Yusup, Suzana and Akil, Hazizan Md (2015) Comparison of some biocomposite board properties fabricated from lignocellulosic biomass before and after Ionic liquid pretreatment. CHEMICAL ENGINEERING, 45.

Mukhtar, Amir and Xia, Likun and Tang, Tong Boon (2015) Vehicle detection techniques for collision avoidance systems: A review. IEEE transactions on intelligent transportation systems, 16 (5). pp. 2318-2338.

Mohamad, Taib Iskandar (2015) In-water injection of high-pressure pulsed gas jet: A simple analytical tool for direct injection of gaseous fuels in automotive engine. Fuel, 160. pp. 386-392.

N

Naqvi, Syed Ali Arsalan and Badruddin , Nasreen and Jatoi, Munsif Ali and Malik, Aamir Saeed and Hazabbah, Wan and Abdullah, Baharudin (2015) EEG based time and frequency dynamics analysis of visually induced motion sickness (VIMS). Australasian Physical and Engineering Sciences in Medicine. ISSN 1879-5447

Nagrath, Vineet and Morel, Olivier and Malik, Aamir Saeed and Mohamad Saad, Mohamad Naufal and Meriaudeau, Fabrice (2015) Peer to peer trade in HTM5 meta model for agent oriented cloud robotic systems. Peer-to-Peer Networking and Applications.

Nagrath, Vineet and Morel, Olivier and Malik, Aamir Saeed and Mohamad, Naufal Mohamad (2015) Dynamic electronic institutions in agent oriented cloud robotic systems. SpringerPlus.

Norbert Simon, Michael Crozier, Mairead Roiste, Abdul Ghani Rafe, . (2015) Time series assessment on landslide occurrences in an area undergoing development. Time series assessment on landslide occurrences in an area undergoing development.

Nasir, Q. and Sabil, K.M. and Lau, K.K. (2015) Measurement of isothermal (vapor+liquid) equilibria, (VLE) for binary (CH4+CO2) from T=(240.35 to 293.15) K and CO2 rich synthetic natural gas systems from T=(248.15 to 279.15) K. Journal of Natural Gas Science and Engineering, 27. pp. 158-167.

Nasir, Rizwan and Mukhtar, Hilmi and Man, Zakaria and Shaharun, Maizatul Shima Bt and Bakar, Mohamad Zailani Abu (2015) PERFORMANCE STUDY OF AMINE INCORPORATED POLYMERIC MEMBRANE FOR CARBON DIOXIDE REMOVAL. Polymers Research Journal, 9 (4). p. 435.

Nasir, Rizwan and Mukhtar, Hilmi and Man, Zakaria and Dutta, Binay K and Shaharun, Maizatul Shima and Bakar, Mohamad Zailani Abu (2015) Mixed matrix membrane performance enhancement using alkanolamine solution. Journal of Membrane Science, 483. pp. 84-93.

Nasir, Rizwan and Mukhtar, Hilmi and Man, Zakaria and Shaharun, Maizatul Shima and Bakar, MZ Abu (2015) Development and performance prediction of polyethersulfone-carbon molecular sieve mixed matrix membrane for CO2/CH4 separation. Chemical Engineering Transactions, 45. pp. 1417-1422.

Nasir, Rizwan and Mukhtar, Hilmi and Man, Zakaria and Shaharun, Maizatul Shima and Bakar, Mohamad Zailani Abu (2015) Effect of fixed carbon molecular sieve (CMS) loading and various di-ethanolamine (DEA) concentrations on the performance of a mixed matrix membrane for CO 2/CH 4 separation. Rsc Advances, 5 (75). pp. 60814-60822.

Nasir, Qazi and Sabil, Khalik M and Lau, KK (2015) Measurement of isothermal (vapor+ liquid) equilibria,(VLE) for binary (CH4+ CO2) from T=(240.35 to 293.15) K and CO2 rich synthetic natural gas systems from T=(248.15 to 279.15) K. Journal of Natural Gas Science and Engineering, 27. pp. 158-167.

Nasir, R. and Mukhtar, H. and Man, Z. and Shaharun, M.S. and Bakar, M.Z.A. (2015) Development and performance prediction of polyethersulfone-carbon molecular sieve mixed matrix membrane for CO2/CH4 separation. Chemical Engineering Transactions, 45. pp. 1417-1422.

Naqvi, S.R. and Uemura, Y. and Yusup, S. and Sugiura, Y. and Nishiyama, N. (2015) In situ catalytic fast pyrolysis of paddy husk pyrolysis vapors over MCM-22 and ITQ-2 zeolites. Journal of Analytical and Applied Pyrolysis, 114. pp. 32-39.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Shaari, K.Z.K. (2015) Effect of pre-coat solution temperature on fluidized bed urea coatings. Surface Engineering, 31 (7). pp. 486-491.

Nazri, N.I.A.M. and Awang Rambli, D.R. and Doolan, D.C. (2015) Interaction experiences in mobile augmented reality. Jurnal Teknologi, 75 (3). pp. 75-80.

Naz, M.Y. and Sulaiman, S.A. and Man, Z. (2015) Time function DualPDA study of spray growth and droplet size-velocity profiles of chemically modified tapioca starch. Aerosol and Air Quality Research, 15 (5). pp. 1699-1711.

Nasir, R. and Mukhtar, H. and Man, Z. and Dutta, B.K. and Shaharun, M.S. and Abu Bakar, M.Z. (2015) Mixed matrix membrane performance enhancement using alkanolamine solution. Journal of Membrane Science, 483. pp. 84-93.

Nasir, R. and Mukhtar, H. and Man, Z. and Shaharun, M.S. and Abu Bakar, M.Z. (2015) Effect of fixed carbon molecular sieve (CMS) loading and various di-ethanolamine (DEA) concentrations on the performance of a mixed matrix membrane for CO<inf>2</inf>/CH<inf>4</inf> separation. RSC Advances, 5 (75). pp. 60814-60822.

Nizamani, F. and Marimuthu, M. (2015) Small and medium enterprises: Asymmetric information and critical factors affecting bank financing. Advanced Science Letters, 21 (5). pp. 1615-1618.

Nuruddin, M.F. and Ullah Khan, S. and Shafiq, N. and Ayub, T. (2015) Strength prediction models for PVA fiber-reinforced high-strength concrete. Journal of Materials in Civil Engineering, 27 (12).

Nallagownden, P. and Alhaj, H.M.M. and Sarwar, M.B. (2015) Optimizing the efficiency of Oscillating Water Column (OWC) wave energy converter using genetic algorithm. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10218-10227.

Nordin, A. and Majid, M.A.A. (2015) Performance assessment of Heat Recovery Steam Generator at district Cooling plant. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10196-10199.

Nasif, M.S. (2015) Effect of utilizing different permeable material in air-to-air fixed plate energy recovery heat exchangeron energy saving. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10153-10158.

Naz, M.Y. and Sulaiman, S.A. and Man, Z. and Ariwahjoedi, B. (2015) Effect of the water spray stress on swirling fluidized bed height. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10192-10195.

Norizan, S.N.I.B. and Aziz, I.B.A. and Haron, N.S. and Jaafar, J. and Ismail, N.N. and Mehat, M. (2015) Roadside worker detection and alert system using RFID. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17899-17904.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Zilati, K. (2015) Visual characterization of heated water spray jet breakup induced by full cone spray nozzles. Journal of Applied Mechanics and Technical Physics, 56 (2). pp. 211-219.

Nazri, N.I.A.M. and Awang Rambli, D.R. and Doolan, D.C. (2015) Interaction experiences in mobile augmented reality. Jurnal Teknologi, 75 (3). pp. 75-80.

Naqvi, S.A.A. and Badruddin, N. and Jatoi, M.A. and Malik, A.S. and Hazabbah, W. and Abdullah, B. (2015) EEG based time and frequency dynamics analysis of visually induced motion sickness (VIMS). Australasian Physical and Engineering Sciences in Medicine, 38 (4). pp. 721-729.

Nuruddin, M.F. and Memon, F.A. and Demie, S. and Shafiq, N. (2015) Influence of water-to-geopolymer solids ratio and curing time on the properties of self-compacting geopolymer concrete. Malaysian Construction Research Journal, 13 (2). pp. 29-38.

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Shakir, I. and Ullah, S. and Sagir, M. and Pervaiz, M. (2015) Surface morphology and mechanical strength of AISI M2 tool steel treated in abnormal glow region of plasma. Surface Engineering and Applied Electrochemistry, 51 (1). pp. 58-64.

Nawaz, F. and Jeoti, V. (2015) A novel anti-collision protocol for optimization of remote sensing in dense reader network. Lecture Notes in Electrical Engineering, 315. pp. 213-222.

Nurudin, M.F. and Memon, F.A. (2015) Properties of self-compacting geopolymer concrete. Materials Science Forum, 803. pp. 99-109.

Nik Yusoff, N.H. and Mamat, O. and Isa, M.C. (2015) A review of electrodeposition techniques and variables for production of nickel-cobalt / alumina (Ni-Co/Al2O3) composite coatings. Defence S and T Technical Bulletin, 8 (2). pp. 129-140.

Naz, MY and Sulaiman, SA and Ariwahjoedi, B and Shaari, KZK (2015) Effect of pre-coat solution temperature on fluidized bed urea coatings. Surface Engineering, 31 (7). pp. 486-491.

O

Osman Ali, Amal Seralkhatem and Asirvadam , Vijanth Sagayan and Malik, Aamir Saeed and Eltoukhy , Mohamed Meselhy and Abd Aziz, Azrina (2015) Age-Invariant Face Recognition Using Triangle Geometric Features. International Journal of Pattern Recognition and Artificial Intelligence. ISSN 2180014

Ooi, B.L. and Gilbert, J.M. and Aziz, A.R.A. (2015) Switching damping for a frequency-tunable electromagnetic energy harvester. Sensors and Actuators, A: Physical, 234. pp. 311-320.

Olisa, E. and Sapari, N. and Malakahmad, A. and Orji, K.U. and Riahi, A. (2015) Detection of landfill gas in leachate pipe and pond of a semi-aerobic landfill. Chemical Engineering Transactions, 45. pp. 1687-1692.

Okitsu, J. and Khamis, M.F.I. and Zakaria, N. and Naono, K. and Haruna, A.A. (2015) Toward an architecture for integrated gas district cooling with data center control to reduce CO2 emission. Sustainable Computing: Informatics and Systems, 6. pp. 39-47.

Ooi, B.L. and Gilbert, J.M. and Aziz, A.R.A. (2015) Switching damping for a frequency-tunable electromagnetic energy harvester. Sensors and Actuators, A: Physical, 234. pp. 311-320.

P

Pendyala, R. and Chong, J.L. and Ilyas, S.U. (2015) CFD analysis of heat transfer performance in a car radiator with nanofluids as coolants. Chemical Engineering Transactions, 45. pp. 1261-1266.

Partoon, Behzad and Sabil, Khalik M and Keong, Lau Kok (2015) Capturing carbon dioxide through a gas hydrate-based process. Chemical Engineering Transactions, 45. pp. 1867-1872.

Padmanabhan, E. and Sivapriya, B. and Huang, K.H. and Askury, A.K. and Chow, W.S. (2015) The impact of stylolites and fractures in defining critical petrophysical and geomechanical properties of some carbonate rocks. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 1 (1-2). pp. 55-67.

Partoon, B. and Sabil, K.M. and Keong, L.K. (2015) Capturing carbon dioxide through a gas hydrate-based process. Chemical Engineering Transactions, 45. pp. 1867-1872.

Patil, S.S. and Karuppanan, S. and Atanasovska, I. (2015) Contact stress evaluation of involute gear pairs, including the effects of friction and helix angle. Journal of Tribology, 137 (4).

Pendyala, R. and Yong, J. and Azman, I.A. and Ilyas, S.U. (2015) CFD simulations of transient fuel gases mixing, leakage and flammability in air. Chemical Engineering Transactions, 45. pp. 1921-1926.

Pendyala, R. and Wong, Y.S. and Ilyas, S.U. (2015) CFD simulations of natural convection heat transfer in enclosures with varying aspect ratios. Chemical Engineering Transactions, 45. pp. 793-798.

Potty, N.S. and Sirajuddin, M. (2015) Study on empirical seismic codal guidelines for masonry buildings in Kollam, Kerala, India. Journal of Engineering Science and Technology, 10 (7). pp. 865-877.

Purnomo, E.W. and Ghosh, D.P. (2015) The maximum amplitude weighted integrated energy spectra: A new gauge in seismic thin-bed interpretation. Journal of Engineering and Technological Sciences, 47 (1). pp. 20-35.

Patil, S.S. and Karuppanan, S. and Atanasovska, I. (2015) Contact stress evaluation of involute gear pairs, including the effects of friction and helix angle. Journal of Tribology, 137 (4).

Park, D.K. and Kim, D.K. and Park, C.-H. and Park, D.H. and Jang, B.S. and Kim, B.J. and Paik, J.K. (2015) On the crashworthiness of steel-plated structures in an arctic environment: An experimental and numerical study. Journal of Offshore Mechanics and Arctic Engineering, 137 (5).

Potty, N.S. and Sirajuddin, M. (2015) Study on empirical seismic codal guidelines for masonry buildings in Kollam, Kerala, India. Journal of Engineering Science and Technology, 10 (7). pp. 865-877.

Q

Qayyum, A. and Shoaib, M. and Faye, I. (2015) Some new generalized results on Ostrowski type integral inequalities with application. Journal of Computational Analysis and Applications, 19 (4). pp. 693-712.

Quental, M.V. and Passos, H. and Kurnia, K.A. and Coutinho, J.A.P. and Freire, M.G. (2015) Aqueous Biphasic Systems Composed of Ionic Liquids and Acetate-Based Salts: Phase Diagrams, Densities, and Viscosities. Journal of Chemical and Engineering Data, 60 (6). pp. 1674-1682.

R

Rahmanian, N. and Ilias, I.B. and Nasrifar, K. (2015) Process simulation and assessment of a back-up condensate stabilization unit. Journal of Natural Gas Science and Engineering, 26. pp. 730-736.

Rashidi, N.A. and Yusup, S. (2015) Effect of process variables on the production of biomass-based activated carbons for carbon dioxide capture and sequestration. Chemical Engineering Transactions, 45. pp. 1507-1512.

Rozali, N.E.M. and Alwi, S.R.W. and Ho, W.S. and Manan, Z.A. and KlemeÅ¡, J.J. (2015) Expansion of a diesel plant into a hybrid power system using power pinch analysis. Chemical Engineering Transactions, 45. pp. 343-348.

Reiniati, I. and Osman, N.B. and Mc Donald, A.G. and Laborie, M.-P. (2015) Linear viscoelasticity of hot-pressed hybrid poplar relates to densification and to the in situ molecular parameters of cellulose. Annals of Forest Science, 72 (6). pp. 693-703.

Raza, M.Q. and Khosravi, A. (2015) A review on artificial intelligence based load demand forecasting techniques for smart grid and buildings. Renewable and Sustainable Energy Reviews, 50. pp. 1352-1372. ISSN 13640321

Rahman, I. and Vasant, P. and Singh, B.S.M. and Abdullah-Al-Wadud, M. (2015) Technical challenges of plug-in hybrid electric vehicles deployment in smart electric grid. Contemporary Engineering Sciences, 8 (21-24). pp. 1119-1126.

Razali, R. and Shafie, A. and Hassan, A.R. and Khan, H. (2015) A multivariate study of energy consumption, urbanisation, trade openness and economic growth in Malaysia. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10275-10280.

Roslim, M.K. and Hassan, S. and Baheta, A.T. (2015) Experimental investigation on heat transfer enhancement by using porous twisted plate as an insert in a fitted tube. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10164-10168.

Rahman, I. and Vasant, P.M. and Mahinder Singh, B.S. and Abdullah-Al-Wadud, M. (2015) Swarm Intelligence-Based Smart Energy Allocation Strategy for Charging Stations of Plug-In Hybrid Electric Vehicles. Mathematical Problems in Engineering, 2015.

Rehman, M.Z.U. and Baharudin, Z. and Zakariya, M.A. and Khir, M.H.M. and Jilani, M.T. (2015) RF MEMS based tunable bowtie shaped substrate integrated waveguide filter. Radioengineering, 24 (1). pp. 25-31.

Rehan, M. and Hasbullah, H. and Rehan, M. and Chughtai, O. and Rehan, W. (2015) Zoomout HELLO: A novel 1-hop broadcast scheme to improve network QoS for VANET on highways. Advances in Intelligent Systems and Computing, 306. pp. 75-84.

Rahmiati, T. and Azizli, K.A. and Man, Z. and Ismail, L. and Nuruddin, M.F. (2015) Effect of solid/liquid ratio during curing time fly ash based geopolymer on mechanical property. Materials Science Forum, 803. pp. 120-124.

Rahmanian, N. and Ali, S.H.B. and Homayoonfard, M. and Ali, N.J. and Rehan, M. and Sadef, Y. and Nizami, A.S. (2015) Analysis of physiochemical parameters to evaluate the drinking water quality in the state of perak, Malaysia. Journal of Chemistry, 2015.

Rafiq, S. and Maulud, A. and Man, Z. and Mutalib, M.I.A. and Ahmad, F. and Khan, A.U. and Khan, A.L. and Ghauri, M. and Muhammad, N. (2015) Modelling in mixed matrix membranes for gas separation. Canadian Journal of Chemical Engineering, 93 (1). pp. 88-95.

Rajabi, MS and Moniruzzaman, M and Bustam, MA and Lotfi, M (2015) Recent advances of ionic liquids in extarction of biologically active compounds: A review. Am. J. Chem, 5. pp. 7-12.

S

S.Y.M Alashloo, Deva Ghosh, YasirBashir, W. I. Wan Yusoff, . (2015) A comparision on initial-value ray tracing and fast marching eikonal solver for VTI traveltime computing. A comparision on initial-value ray tracing and fast marching eikonal solver for VTI traveltime computing.

Shaikh, Muhammad Shuaib and Shariff, Azmi Mohd and Bustam, Mohd Azmi and Murshid, Ghulam (2015) Physicochemical properties of aqueous solutions of sodium glycinate in the non-precipitation regime from 298.15 to 343.15 K. Chinese Journal of Chemical Engineering, 23 (3). pp. 536-540.

Suleman, Humbul and Maulud, Abdulhalim Shah and Man, Zakaria (2015) Review and selection criteria of classical thermodynamic models for acid gas absorption in aqueous alkanolamines. Reviews in Chemical Engineering, 31 (6). pp. 599-639.

Suleman, Humbul and Nasir, Qazi and Maulud, Abdulhalim S and Man, Zakaria (2015) Comparative study of electrolyte thermodynamic models for carbon dioxide solubility in water at high pressure. Chemical Engineering Transactions, 45. pp. 589-594.

Satti, Iftikhar Ahmed and Ghosh, Deva Prasad and Wan Yusoff , Wan Ismail (2015) 3D predrill pore pressure prediction using basin modeling approach in a field of Malay Basin. asian journal of earth sciences.

Shad, Muhammad Kashif and Lai, Fong Woon (2015) Enterprise Risk Management and Firm Performance Validated Through Economic Value Added Factors. INTERNATIONAL JOURNAL OF ECONOMICS AND STATISTICS.

Sethi, Muhammad Athar Javed and Hussin , Fawnizu Azmadi and Hamid, Nor Hisham (2015) Survey of Network on Chip Architectures. Science International, 27 (5). pp. 4133-4144. ISSN 1013-5316

Suhaimi, Hassan and Baheta, Aklilu Tesfamichael (2015) Experimental investigation on heat transfer enhancement by using porous twisted plate as an inserts in a fitted tube. ARPN Journal of Engineering and Applied Sciences, 10 (21). ISSN 1819-6608

SN Fathiyah Jamaludin, Abdul Halim Abdul Latiff, Askury A. Kadir, . (2015) Interpretation of Gas Seepages on Seismic Data: Example from Malaysian Offshore. Interpretation of Gas Seepages on Seismic Data: Example from Malaysian Offshore.

SN Fathiyah Jamaludin, AH Abdul Latiff, DP Ghosh, . (2015) Structural Balancing vs Horizon Flattening on Seismic Data: Example from Extensional Tectonic Setting. Structural Balancing vs Horizon Flattening on Seismic Data: Example from Extensional Tectonic Setting.

Shamsudin, N. and Hussein, S.H. and Nugroho, H. and Ahmad Fadzil, M.H. (2015) Objective assessment of vitiligo with a computerised digital imaging analysis system. Australasian Journal of Dermatology, 56 (4). pp. 285-289.

Sundramoorthy, J.D. and Hammonds, P. and Sabil, K.M. and Foo, K.S. and Lal, B. (2015) Macroscopic Observations of Catastrophic Gas Hydrate Growth during Pipeline Operating Conditions with or without a Kinetic Hydrate Inhibitor. Crystal Growth and Design, 15 (12). pp. 5919-5929.

Safdar, R. and Omar, A.A. and Ismail, L.B. and Bari, A. and Lal, B. (2015) Measurement and correlation of physical properties of aqueous solutions of tetrabutylammonium hydroxide, piperazine and their aqueous blends. Chinese Journal of Chemical Engineering, 23 (11). pp. 1811-1818.

Shannan, N.M. and Yahaya, N.Z. and Singha, B. and Salam, Z. and Ahmed, K.Y. (2015) Two-diode model for parameters extraction of photovoltaic module under temperature variation. IEICE Electronics Express, 12 (19).

Siddiqui, F.I. and Pathan, D.M. and Osman, S.B.A.B.S. and Pinjaro, M.A. and Memon, S. (2015) Comparison between regression and ANN models for relationship of soil properties and electrical resistivity. Arabian Journal of Geosciences, 8 (8). pp. 6145-6155.

Shaikh, M.S. and Shariff, A.M. and Bustam, M.A. and Murshid, G. (2015) Measurement and prediction of physical properties of aqueous sodium L-prolinate and piperazine as a solvent blend for CO2 removal. Chemical Engineering Research and Design, 102. pp. 378-388.

Shafquet, A. and Ismail, I. and Japper-Jaafar, A. and Sulaiman, S.A. and Chala, G.T. (2015) Estimation of gas void formation in statically cooled waxy crude oil using online capacitance measurement. International Journal of Multiphase Flow, 75. pp. 257-266.

Satti, I.A. and Ghosh, D. and Wan Yusoff, W.I. (2015) 3-D predrill overpressure prediction using prestack depth-migrated seismic velocity in a field of southwestern Malay Basin. Arabian Journal of Geosciences, 8 (9). pp. 7387-7398.

Shahid, R. and Muhammad, N. and Gonfa, G. and Toprak, M.S. and Muhammed, M. (2015) Synthesis, COSMO-RS analysis and optical properties of surface modified ZnS quantum dots using ionic liquids. Journal of Physics and Chemistry of Solids, 85. pp. 34-38.

Suleman, H. and Nasir, Q. and Maulud, A.S. and Man, Z. (2015) Comparative study of electrolyte thermodynamic models for carbon dioxide solubility in water at high pressure. Chemical Engineering Transactions, 45. pp. 589-594.

Shehzad, A. and Bashir, M.J.K. and Sethupathi, S. and Lim, J.-W. (2015) An overview of heavily polluted landfill leachate treatment using food waste as an alternative and renewable source of activated carbon. Process Safety and Environmental Protection, 98. pp. 309-318.

Savall, J. and Ho, E.T.W. and Huang, C. and Maxey, J.R. and Schnitzer, M.J. (2015) Dexterous robotic manipulation of alert adult Drosophila for high-content experimentation. Nature Methods, 12 (7). pp. 657-660.

Subhan, F. and Ahmed, S. and Ashraf, K. and Imran, M. (2015) Extended Gradient RSSI Predictor and Filter for Signal Prediction and Filtering in Communication Holes. Wireless Personal Communications, 83 (1). pp. 297-314.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. (2015) Optimum temperature on structural growth of multiwalled carbon nanotubes with low activation energy. Diamond and Related Materials, 58. pp. 129-138.

Saini, S. and Zakaria, N. and Rambli, D.R.A. and Sulaiman, S. (2015) Markerless human motion tracking using hierarchical multi-swarm cooperative particle swarm optimization. PLoS ONE, 10 (5).

Saad, M.S.M. and Rizal, A.R.A. and Nordin, S.M. (2015) Analyzing inter-organization communication between customer and supplier of subsidized paddy fertilizer. Asian Social Science, 11 (17). pp. 90-100.

Slaiman, I. and Tang, T.B. and Hamid, N.H. (2015) Pulse Amplitude and Delay Modulation: Design and performance analysis. Optics Communications, 345. pp. 52-56.

Satti, I.A. and Ghosh, D. and Yusoff, W.I.W. and Hoesni, M.J. (2015) Origin of overpressure in a field in the southwestern Malay basin. SPE Drilling and Completion, 30 (3). pp. 198-211.

Shamim, A. and Ghazali, Z. (2015) Customer participation in value co-creation: Can it develop corporate brand experience? Advanced Science Letters, 21 (5). pp. 1197-1201.

Sulaiman, S. and Rambli, D.R.A. and Zuki, F.S.M. (2015) Putting the tactile feedback to Quranic verses and tajweed rules. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17996-18003.

Shafiq, N. and Nurrudin, M.F. and Gardezi, S.S.S. and Kamaruzzaman, A.B. (2015) Carbon footprint assessment of a typical low rise office building in Malaysia using building information modelling (BIM). International Journal of Sustainable Building Technology and Urban Development, 6 (3). pp. 157-172.

Shafiq, N. and Nuruddin, M.F. and Khan, S.U. and Ayub, T. (2015) Calcined kaolin as cement replacing material and its use in high strength concrete. Construction and Building Materials, 81. pp. 313-323.

Slaiman, I. and Tang, T.B. and Hamid, N.H. (2015) Pulse Amplitude and Delay Modulation: Design and performance analysis. Optics Communications, 345. pp. 52-56.

Sasmito, A.P. and Kurnia, J.C. and Birgersson, E. and Mujumdar, A.S. (2015) Computational evaluation of thermal management strategies in an underground mine. Applied Thermal Engineering, 90. pp. 1144-1150.

Saeed, M.O. and Azizli, K. and Isa, M.H. and Bashir, M.J.K. (2015) Application of CCD in RSM to obtain optimize treatment of POME using Fenton oxidation process. Journal of Water Process Engineering, 8. e7-e16.

Sulaiman, S.A. and Balamohan, S. and Moni, M.N.Z. and Atnaw, S.M. and Mohamed, A.O. (2015) Feasibility study of gasification of oil palm fronds. Journal of Mechanical Engineering and Sciences, 9. pp. 1744-1757.

Salihi, I.U. and Kutty, S.R.M. and Isa, M.H. and Olisa, E. and Aminu, N. (2015) Adsorption of copper using modified and unmodified sugarcane bagasse. International Journal of Applied Engineering Research, 10 (19). pp. 40434-40438.

Soleimani, H. and Abbas, Z. and Yahya, N. and Soleimani, H. and Sabet, M. and Oechsner, A. and Politis, C. (2015) An optimisation approch to determine the electromagnetic properties of lanthanum iron garnet filled PVDF-polymer composite at microwave frequencies. Digest Journal of Nanomaterials and Biostructures, 10 (3). pp. 895-900.

Shairi, N.A. and Ahmad, B.H. and Wong, P.W. and Zakaria, Z. (2015) High isolation and absorptive feature in single pole double throw (SPDT) discrete switch design using switchable matched ring resonator. Advanced Science Letters, 21 (1). pp. 93-97.

Shah, S.N. and Lethesh, K.C. and Mutalib, M.I.A. and Pilus, R.B.M. (2015) Evaluation of thermophysical properties of imidazolium-based phenolate ionic liquids. Industrial and Engineering Chemistry Research, 54 (14). pp. 3697-3705.

Sumra, I.A. and Hasbullah, H.B. and AbManan, J.-L.B. (2015) Attacks on security goals (confidentiality, integrity, availability) in VANET: A survey. Advances in Intelligent Systems and Computing, 306. pp. 51-61.

Satti, I.A. and Ghosh, D. and Yusoff, W.I.W. and Hoesni, M.J. (2015) Origin of overpressure in a field in the southwestern Malay basin. SPE Drilling and Completion, 30 (3). pp. 198-211.

Sugathan, S.K. and Dominic, D.D. and Ramayah, T. and Ratnam, K.A. (2015) The associating factors and outcomes of green supply chain management implementation â�� from the technological and non-technological perspectives. Advances in Intelligent Systems and Computing, 353. pp. 491-501.

Savita, K.S. and Dominic, P.D.D. and Ratnam, K.A. (2015) The role of green IT and IT for green within green supply Chain management: A preliminary finding from ISO14001 companies in Malaysia. Lecture Notes in Electrical Engineering, 315. pp. 883-894.

Siti Nur Azella, Z. and Noraini Muti, M. (2015) Microscopy analysis of synthesized monodisperse SiO 2 sphere. Malaysian Journal of Microscopy, 11 (1). pp. 115-120.

Shafiq, N. and Nuruddin, M.F. and Safdar Gardezi, S.S. and Farhan, S.A. and Al Rawy, H.A.M. (2015) Reduction of embodied CO2 emissions from conventional single storey house in malaysia by recycled materials using building information modeling (BIM). Advances in Environmental Biology, 9 (1). pp. 17-21.

Saad, M.N.M. and Laouiti, A. and Qayyum, A. (2015) Foreword. Advances in Intelligent Systems and Computing, 306. V-VI.

Sundramoorthy, Jega Divan and Hammonds, Paul and Sabil, Khalik M and Foo, Khor Siak and Lal, Bhajan (2015) Macroscopic observations of catastrophic gas hydrate growth during pipeline operating conditions with or without a kinetic hydrate inhibitor. Crystal Growth & Design, 15 (12). pp. 5919-5929.

Sabil, Khalik M and Nashed, Omar and Lal, Bhajan and Ismail, Lukman and Japper-Jaafar, Azuraien (2015) Experimental investigation on the dissociation conditions of methane hydrate in the presence of imidazolium-based ionic liquids. The Journal of Chemical Thermodynamics, 84. pp. 7-13.

Safdar, Rizwan and Omar, Abdul Aziz and Ismail, Lukman B and Bari, Arhama and Lal, Bhajan (2015) Measurement and correlation of physical properties of aqueous solutions of tetrabutylammonium hydroxide, piperazine and their aqueous blends. Chinese Journal of Chemical Engineering, 23 (11). pp. 1811-1818.

Sundramoorthy, Jega Divan and Sabil, Khalik M and Lal, Bhajan and Hammonds, Paul (2015) Catastrophic crystal growth of clathrate hydrate with a simulated natural gas system during a pipeline shut-in condition. Crystal Growth & Design, 15 (3). pp. 1233-1241.

Slaiman, Iskandar and Tang, Tong Boon and Hamid, Nor Hisham (2015) Pulse Amplitude and Delay Modulation: Design and performance analysis. Optics Communications, 345. pp. 52-56.

Shah, Syed Ayaz Ali and Tang, Tong Boon and Laude, Augustinus and Faye, Ibrahima (2015) Automated detection of microaneurysms using curvelet transform. Investigative Ophthalmology & Visual Science, 56 (7). p. 5266.

T

Tan, LS and Shariff, AM and Lau, KK and Bustam, MA (2015) Impact of high pressure on high concentration carbon dioxide capture from natural gas by monoethanolamine/N-methyl-2-pyrrolidone solvent in absorption packed column. International Journal of Greenhouse Gas Control, 34. pp. 25-30.

Trinh, Thanh H and KuShaari, KuZilati and Basit, Abdul (2015) Modeling the release of nitrogen from controlled-release fertilizer with imperfect coating in soils and water. Industrial & Engineering Chemistry Research, 54 (26). pp. 6724-6733.

Traini, C. and Proust, J.-N. and Menier, D. and Mathew, M.J. (2015) Distinguishing natural evolution and human impact on estuarine morpho-sedimentary development: A case study from the Vilaine Estuary, France. Estuarine, Coastal and Shelf Science, 163 (PB). pp. 143-155.

Talla, G. and Sahoo, D.K. and Gangopadhyay, S. and Biswas, C.K. (2015) Modeling and multi-objective optimization of powder mixed electric discharge machining process of aluminum/alumina metal matrix composite. Engineering Science and Technology, an International Journal, 18 (3). pp. 369-373.

Trinh, T.H. and Kushaari, K. and Basit, A. (2015) Modeling the Release of Nitrogen from Controlled-Release Fertilizer with Imperfect Coating in Soils and Water. Industrial and Engineering Chemistry Research, 54 (26). pp. 6724-6733.

Teo, W. and Hor, Y. (2015) Suitability of optimized truss model to predict the FRP contribution to shear resistance for externally bonded FRP strengthened RC beams without internal stirrups. Composites Part B: Engineering, 80. pp. 385-398.

Trinh, T.H. and Kushaari, K. and Shuib, A.S. and Ismail, L. and Azeem, B. (2015) Modelling the release of nitrogen from controlled release fertiliser: Constant and decay release. Biosystems Engineering, 130. pp. 34-42.

Tan, L.S. and Shariff, A.M. and Lau, K.K. and Bustam, M.A. (2015) Impact of high pressure on high concentration carbon dioxide capture from natural gas by monoethanolamine/N-methyl-2-pyrrolidone solvent in absorption packed column. International Journal of Greenhouse Gas Control, 34. pp. 25-30.

Taha, O.M.A. and Bahrom, M.B. and Taha, O.Y. and Aris, M.S. (2015) Experimental study on two way shape memory effect training procedure for NiTiNOL shape memory alloy. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7847-7851.

Ting, H. and Chuah, F. and Cheah, J. and Memon, M.A. and Yacob, Y. (2015) Revisiting attitude towards advertising, its antecedent and outcome: A two-stage approach using PLS-SEM. International Journal of Economics and Management, 9 (2). pp. 150-170.

Trinh, Thanh H and Kushaari, Kuzilati and Shuib, Anis S and Ismail, Lukman and Azeem, Babar (2015) Modelling the release of nitrogen from controlled release fertiliser: Constant and decay release. Biosystems Engineering, 130. pp. 34-42.

Tamidi, Athirah bt Mohd and Shaari, KZK and Ganesan, T (2015) Reaction Modeling for Prediction of Hydrogen Production During Biomass Gasification. Engineering Applications of Computational Fluid Dynamics. pp. 1-16.

Tang, Tong Boon and Bhatti, Mehwish and Laude, Augustinus (2015) Effects of Water Drinking Test on Blood Flow in Optic Nerve Head using LSFG. Investigative Ophthalmology & Visual Science, 56 (7). p. 2743.

U

Ullah, S and Shariff, AM and Bustam, MA and Nadeem, M and Naz, MY and Ayoub, M (2015) Study on effect of benzotriazole and surfactants on corrosion inhibition of copper alloys in sulphuric acid. Int. J. Electrochem. Sci, 10 (11). pp. 9443-9455.

Ullah, S and Bustam, MA and Ahmad, F and Nadeem, M and Naz, MY and Sagir, M and Shariff, AM (2015) Synthesis and characterization of melamine formaldehyde resins for decorative paper applications. Journal of the Chinese Chemical Society, 62 (2). pp. 182-190.

Ur Rehman, M.Z. and Baharudin, Z. and Zakariya, M.A. and Khir, M.H.M. and Jilani, M.T. (2015) RF MEMS based tunable bandpass filter using QMSIW resonator. Optoelectronics and Advanced Materials, Rapid Communications, 9 (11-12). pp. 1498-1502.

Ullah, Z. and Bustam, M.A. and Man, Z. and Muhammad, N. and Khan, A.S. (2015) Synthesis, characterization and the effect of temperature on different physicochemical properties of protic ionic liquids. RSC Advances, 5 (87). pp. 71449-71461.

Uemura, Y. and Matsumoto, R. and Saadon, S. and Matsumura, Y. (2015) A study on torrefaction of Laminaria japonica. Fuel Processing Technology, 138. pp. 133-138.

Usman Dalhatu, D.B. and Abdullah, A. and Ibrahim, Y.M. and Abideen, A.A. (2015) Awareness level of north-west zone of Nigeria retail customers towards Islamic banking. Advanced Science Letters, 21 (5). pp. 1460-1463.

Ullah, R. and Jaafar, J. and Said, A.B.M. (2015) Purify noisy data from annotated images using Montylingua and control redundant term. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 18193-18199.

Ud Din, I. and Shaharun, M.S. and Subbarao, D. and Naeem, A. (2015) Synthesis, characterization and activity pattern of carbon nanofibers based copper/zirconia catalysts for carbon dioxide hydrogenation to methanol: Influence of calcination temperature. Journal of Power Sources, 274. pp. 619-628.

Ullah, H. and Islam, S. and Dennis, L.C.C. and Abdelhameed, T.N. and Khan, I. and Fiza, M. (2015) Approximate solution of two-dimensional nonlinear wave equation by optimal homotopy asymptotic method. Mathematical Problems in Engineering, 2015.

Umar, U.A. and Shafiq, N. and Malakahmad, A. and Nuruddin, M.F. and Khamidi, M.F. and Farhan, S.A. and Gardezi, S.S.S. (2015) 4D BIM application in AEC industry: Impact on integrated project delivery. Research Journal of Applied Sciences, Engineering and Technology, 10 (5). pp. 547-552.

W

Wong, MK and Bustam, MA and Shariff, AM (2015) Chemical speciation of CO2 absorption in aqueous monoethanolamine investigated by in situ Raman spectroscopy. International Journal of Greenhouse Gas Control, 39. pp. 139-147.

Wong, M.K. and Bustam, M.A. and Shariff, A.M. (2015) Chemical speciation of CO2 absorption in aqueous monoethanolamine investigated by in situ Raman spectroscopy. International Journal of Greenhouse Gas Control, 39. pp. 139-147.

Wai, C.K. and Yusup, S. and Kapor, N.Z.A. and Chok, C. (2015) Catalytic pyrolysis of Oil Palm Frond (OPF) using Graphite Nanofiber (GNF) as catalysts. Chemical Engineering Transactions, 45. pp. 1543-1548.

Waris, M. and Liew, M.S. and Faris, M. and Idrus, A. (2015) An exploratory study on enablers and barriers for onsite mechanisation in the Malaysian construction industry. Malaysian Construction Research Journal, 16 (1). pp. 15-30.

Y

Yasir Bashir, Deva Ghosh, S.Y.M Alashloo, Chow Weng Sum, . (2015) Effect of frequency and Migration Aperture on Seismic Diffraction Imaging. Effect of frequency and Migration Aperture on Seismic Diffraction Imaging.

Yusup, Suzana and Yiin, Chung Loong and Tan, Chiang Jinn and Abdullah, Bawadi (2015) Determination of Optimum Condition for the Production of Rice Husk-Derived Bio-oil by Slow Pyrolysis Process. Process Design Strategies for Biomass Conversion Systems. pp. 329-340.

Yusup, Suzana and Zabiri, Haslinda (2015) Australian Journal of. Australian Journal of Basic and Applied Sciences, 9 (36). pp. 549-555.

Yusup, Suzana and Zabiri, Haslinda and Suliman, MM and Khan, Zakir (2015) Variable Influence Analysis of an In-Situ Catalytic Adsorption (ICA) Steam Gasification using Multivariate PLS. Australian Journal of Basic and Applied Sciences, 9 (37). pp. 85-89.

Yasir Bashir, Deva Ghosh, Chow Weng Sum, . (2015) Detection of Fault and Fracture Using Seismic Diffraction and Behaviour of Diffraction Hyperbola with Velocity and Time. Detection of Fault and Fracture Using Seismic Diffraction and Behaviour of Diffraction Hyperbola with Velocity and Time.

Yusuf, N.R. and Kamil, R.N.M. and Yusup, S. (2015) Response surface methodology approach for optimisation of alkaline hydrolysis of Jatropha Curcas oil via microwave assisted. Chemical Engineering Transactions, 45. pp. 1513-1518.

Yavari, S. and Malakahmad, A. and Sapari, N.B. (2015) Biochar efficiency in pesticides sorption as a function of production variablesâ��a review. Environmental Science and Pollution Research, 22 (18). pp. 13824-13841.

Yiin, C.L. and Yusup, S. and Quitain, A.T. and Uemura, Y. (2015) Physicochemical properties of low transition temperature mixtures in water. Chemical Engineering Transactions, 45. pp. 1525-1530.

Yavari, S. and Malakahmad, A. and Sapari, N.B. (2015) A Review on Phytoremediation of Crude Oil Spills. Water, Air, and Soil Pollution, 226 (8).

Ya, H.H. and El-Sobky, H. (2015) An experimental study on the behaviour of glass filled polypropylene and polyethylene composite pipes under quasi-static axial loading. Jurnal Teknologi, 74 (10). pp. 111-119.

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. (2015) Improving the modeling capacity of Volterra model using evolutionary computing methods based on Kalman smoother adaptive filter. Applied Soft Computing Journal, 35. pp. 695-707.

Yusof, Z.A.M. and Ahmed, I. and Khan, M.S. and Hussain, S.A. and Hussain, A. and Mutalib, I.B.A. and Balkhair, K.S. and Albeirutty, M.H. (2015) Thermal Evaluation of Diesel/Hydrogen Peroxide Fuel Blend. Chemical Engineering and Technology, 38 (12). pp. 2170-2180.

Yussiff, A.-S. and Wan Ahmad, W.F. and Mustapha, E.E. (2015) Exploring students perceptions of teaching, social, cognitive presences, effectiveness for teamwork and learning outcomes. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17749-17757.

Yaqub, A. and Isa, M.H. and Ajab, H. (2015) Electrochemical degradation of polycyclic aromatic hydrocarbons in synthetic solution and produced water using a Ti/SnO2-Sb2O5-RuO2 anode. Journal of Environmental Engineering (United States), 141 (4).

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. (2015) Identification of slow drift motions of a truss spar platform using parametric Volterra model. Ocean Engineering, 109. pp. 654-668.

Yousif, A.A. and Sulaiman, S.A. and Nasif, M.S. (2015) Experimental study on laminar flame speeds and Markstein length of propane air mixtures at atmospheric conditions. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2188-2198.

Ye, K.Z. and Kyaw, H.A. and Portnov, E.M. and Bain, A.M. and Vasant, P. (2015) The efficiency of detecting the failures and troubleshooting while applying technical diagnostics for multi-computer systems. Archives of Control Sciences, 25 (1). pp. 87-107.

Yu, S.Y. and Choi, H.S. and Lee, S.K. and Park, K.-S. and Kim, D.K. (2015) Nonlinear soil parameter effects on dynamic embedment of offshore pipeline on soft clay. International Journal of Naval Architecture and Ocean Engineering, 7 (2). pp. 227-243.

Z

Zafar, Raheel and Malik, Aamir Saeed and Kamel , Nidal and Dass, Sarat Chandra and Abdullah, Jafri Malin and Reza, Faruque and Abdul Karim, Ahmad Helmy (2015) Decoding of visual information from human brain activity_A review of fMRI and EEG studies. Journal of Integrative Neuroscience.

Zuhar Zahir Tuan Harith, Khairul Arifin Mohd Noh, . (2015) ISSUES AND CHALLENGES IN INTERPRETING 2D RESISTIVITY IMAGE. ISSUES AND CHALLENGES IN INTERPRETING 2D RESISTIVITY IMAGE.

Zangeneh, H. and Zinatizadeh, A.A.L. and Habibi, M. and Akia, M. and Hasnain Isa, M. (2015) Photocatalytic oxidation of organic dyes and pollutants in wastewater using different modified titanium dioxides: A comparative review. Journal of Industrial and Engineering Chemistry, 26. pp. 1-36.

Zarif, S. and Faye, I. and Rohaya, D. (2015) Image completion: Survey and comparative study. International Journal of Pattern Recognition and Artificial Intelligence, 29 (3).

Zafar, R. and Malik, A.S. and Kamel, N. and Dass, S.C. and Abdullah, J.M. and Reza, F. and Abdul Karim, A.H. (2015) Decoding of visual information from human brain activity: A review of fMRI and EEG studies. Journal of Integrative Neuroscience, 14 (2). pp. 155-168.

Zulkarnain, N.F. and Ibrahim, T. and Hashim, H.Z. (2015) Design and modelling of electrical machine for ceiling fan system. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10174-10183.

Zakaria, M.S. and Hassan, S. and Nor, M.F.M. (2015) Calorific value of the sewage sludge in the thermal dryer. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10245-10248.

Zainal A., E.Z. and Ibrahim, A.A. and Aziz, A.R.A. and Zulkifli, S.A. (2015) Effect of motoring voltage on compression ratio of a free-piston linear generator engine. Journal of Mechanical Engineering and Sciences, 8. pp. 1393-1400.

Zulkifli, S.A. and Mohd, S. and Saad, N. and Aziz, A.R.A. (2015) Operation and control of split-parallel, through-theroad hybrid electric vehicle with in-wheel motors. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2793-2808.

Zarif, S. and Faye, I. and Rohaya, D. (2015) Image completion based on statistical texture analysis. Journal of Electronic Imaging, 24 (1).

Zamri, N.H. and Ismail, L. and Abdul Rahim, R.H. and Siyal, A.A. and Man, Z. and Azizli, K.A. (2015) Kinetics of geopolymer solidification study using texture analyzer. Materials Science Forum, 803. pp. 75-80.

Zakaria, M.S. and Hassan, S. and Nor, M.F.M. (2015) Calorific value of the sewage sludge in the thermal dryer. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10245-10248.

This list was generated on Mon Nov 25 00:22:16 2024 +08.