Items where Subject is "TS Manufactures"

Article

Adhikari, A. and Biswas, C.K. and Adhikari, N. (2002) Optimization of job scheduling in a machine shop using genetic algorithm. Journal of the Institution of Engineers (India), Part PR: Production Engineering Division, 83 (SEP.). pp. 15-19.

Biswas, C.K. and Pradhan, M.K. (2012) FEM of residual stress of EDMed surfaces. Advanced Materials Research, 383-39. pp. 872-876.

Chawla, B.S. and Biswas, C.K. and Das, N.S. and Khanna, I.K. (2008) Slip-line solutions for orthogonal machining with a step-type chip breaker and experimental validation of cutting parameters. Journal of the Institution of Engineers (India), Part PR: Production Engineering Division, 88 (MAR). pp. 31-36.

Dominic P, Dhanapal Durai and Goh , Kim Nee and Wong, Diana and Chen, Yoke Yie (2010) The importance of service quality for competitive advantage – with special reference to industrial product. Int. J. Business Information System.

Hisham, Siti Farhana and Ahmad, Ishak and Daik, Rusli and Ramli, Anita (2011) Blends of LNR with Unsaturated Polyester Resin from Recycled PET: Comparison of Mechanical Properties and Morphological Analysis with the Optimum Blend by Commercial Resin. Sains Malaysiana, 40 (7). pp. 729-735. ISSN 1266039

Hisham, Siti Farhana and Ahmad, Ishak and Daik, Rusli and Ramli, Anita (2011) Penyediaan dan Pencirian Komposit Upr/Lnr/Gentian Kaca Terawat Menggunakan Resin Poliester Tak Tepu daripada Bahan Buangan PET. Sains Malaysiana, 40 (9). pp. 1029-1035. ISSN 1266039

Mokhlif, N. D. and Al-Kayiem, Hussain H. (2011) Modeling of the Waxing-dewaxing Process in Scraped Surface Exchangers. Journal of Applied Sciences, online. ISSN 18125654

Saad , Nordin and kadirkamanathan, V (2006) N. Saad, and V. Kadirkamanathan. “A DES approach for the analysis and modeling of supply chain system for instability analysis”. Simulation Modeling Practice and Theory, Volume 14, Issue 5, July 2006, pp 541-563. Simulation Modeling Practice and Theory. pp. 489-563. ISSN 1569-190X

Saad ., Nordin and kadirkamanathan, V (2006) Nordin Saad, and V. Kadirkamanathan. “A DES approach for the analysis and modeling of supply chain system for instability analysis”. Simulation Modeling Practice and Theory, Volume 14, Issue 5, July 2006, pp 541-563. Simulation Modeling Practice and Theory, 14 (5). pp. 551-563. ISSN 1569-190X

Vasant, Pandian (2007) Hybrid Optimization Genetic Algorithms (HOGA) with Interactive Evolution to Solve Constraint Optimization Problems for Production Systems . International Journal of Computational Science, 1 (4). pp. 395-406. ISSN 1992-6677

Vasant, Pandian and Bhattacharya, A. (2007) Application of Multi-Objective Fuzzy Linear Programming in Supply Production Planning Problem. INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING, 14 (2). 151-157 . ISSN 1072-4761

Vasant, Pandian (2009) Hybrid genetic algorithms and line search method for industrial production planning with non-linear fitness function. Engineering Applications of Artificial Intelligence , 22 (4-5). pp. 767-777. ISSN 0952-1976

Book Section

Pradhan, Mohan K and Biswas, Chandan Kumar (2012) Investigations Into the Effect of Process Parameters on Material Removal Rate in Electrical Discharge Machining of {AISI} D2 Steel Using Response Surface Methodology. In: Mechatronics and Intelligent Manufacturing. Mechanical Engineering Theory and Applications, Manufacturing Technology Research (978-1-). Nova Science Publisher, USA, pp. 249-266.

Saad ., Nordin and Kamanathan, V and Bennett, S (2008) Modeling of Supply Chain Contextual-Load Model for Instability Analysis,. In: Supply Chain: Theory and Application. ITECH Education and Publishing, Vienna, Vienna, Austria, pp. 489-514. ISBN ISBN 978-3-902613-22-6

Conference or Workshop Item

Aris, Mohd (2010) The Two-Way Training of Shape Memory Alloys Vortex Generators Manufactured in a Selective Laser Melting Process. In: International Conference on Plant Equipment and Reliability (ICPER 2010), Kuala Lumpur, Malaysia , 15-17 June 2010, Kuala Lumpur, Malaysia.

Farooq, Muhammad Umer and Xia, Likun and Azmadi, Fawnizu (2011) A Critical Survey on Automated Model Generation Techniques for High Level Modeling and High Level Fault Modeling. In: 2011 National Postgraduate Conference (NPC), 19-20 Sep 2011, UTP, Malaysia.

Pao, William K. S. and Lin, Chao (2012) Combining Expert Formula and Geometric Feature Extraction for Die Design. In: ICPER 2012, 12-14 June 2012, KLCC.

Saad , Nordin and Arrofiq, M., and Karsiti, M. N. (2009) An Identification of Model for Integrated Variable Speed Drive, Induction Motor and Dynamometer. In: 2009 IEEE Symposium on Industrial Electronics and Applications (ISIEA 2009), 4-6 October, 2009, Kuala Lumpur .

Saad , Nordin and Arrofiq, Muhammad (2010) M. Arrofiq, N. Saad. “Control of Induction Motor Drives Using Modified-Fuzzy Logic Methods”. 2010 IEEE International Conference on Systems, Man, and Cybernetics (SMC 2010), 10-13 October 2010, Instanbul, Turkey, pp. 612-619.IEEE Catalog Number: CFP10SMC-CDR, ISBN: 978-1-4244-6587-3, ISSN: 1062-922X. In: 2010 IEEE International Conference on Systems Man and Cybernetics, 10-13 October 2010, Instanbul, Turkey.

Vasant, Pandian (2009) FUZZY MULTI-OBJECTIVE TRANSPORTATION PLANNING WITH MODIFIED S-CURVE MEMBERSHIP FUNCTION. In: Second Global Conference on Power Control and Optimization, 1-3 June 2009, Bali, Indonesia.

Vasant, Pandian (2008) HYBRID GENETIC AGORITHMS AND LINE SEARCH METHOD FOR INDUSTRIAL PRODUCTION PLANNING WITH NON-LINEAR FITNESS FUNCTION. In: International Conference on Power Control and Optimization, 18-20 July 2008, Chiangmai, Thailand.

Vasant, Pandian (2009) HYBRID SIMULATED ANNEALING AND GENETIC ALGORITHMS FOR INDUSTRIAL PRODUCTION MANAGEMENT PROBLEMS. In: Second Global Conference on Power Control and Optimization, 1-3 June 2009, Bali, Indonesia.

Vasant, Pandian (2010) Hybrid General Pattern Search and Simulated Annealing For Industrial Production Planning Problems. In: 3rd Global Conference on Power Control and Optimization, 2-4, February 2010, Gold Coast, Australia.

Vasant, Pandian (2009) PRODUCT MIX SELECTION USING AN EVOLUTIONARY TECHNIQUE. In: Second Global Conference on Power Control and Optimization, 1-3 June 2009, Bali, Indonesia.

Vasant, Pandian (2010) Fuzzy Multi-Objective Vendor Selection Problem with Modified S-Curve Membership Function. In: 3rd Global Conference on Power Control and Optimization, 2-4, February 2010, Gold Coast, Australia.

Xia, Likun and Bell, Ian and Wilkinson, Antony (2011) Automated Model Conversion for Analogue Simulation based on SPICE-level Description. In: 2011 International Conference on Design and Technology Integrated Systems (DTIS).

Book

Badri, Thar M. and Al-Kayiem, Hussain H. and Taufiq, Mohammed Badri (2013) The Theory of Functional and Adaptive Shell Structures. LAP LAMBERT Academic Publishing, http://www.amazon.com/. ISBN ISBN-10: 3846521752 | ISBN-13: 978-3846521755

Mohamad, Mas Fatiha and Ramli, Anita and Yusup, Suzana (2011) Effect of Iron Loading on the Physicochemical Properties and Catalytic Activity of Fe/CeO2 Catalysts in Palm Kernel Shell Steam Gasification to Hydrogen. IEEE.

Vasant, Pandian (2010) POWER CONTROL AND OPTIMIZATION: Proceedings of the 3rd Global Conference on Power Control and Optimization. American Institute of Physics, USA. ISBN 978-0-7354-0785-5

Citation Index Journal

Abidin, K.A.Z. and Lee, K.C. and Ibrahim, I. and Zainudin, A. (2011) Problem Analysis at a Semiconductor Company: A Case Study on IC Packages. [Citation Index Journal]

Abdullah, S. S and Yusup, Suzana and Ahmad, Murni M and Ramli, Anita (2010) Thermogravimetry Study on Pyrolysis of Various Lignocellulosic Biomass for Potential Hydrogen Production. [Citation Index Journal]

Khan, Zakir and Yusup, Suzana and Ahmad, Murni Melati and Ramli, Anita (2011) Effect of Steam and Catalyst on Palm Waste Thermal Decomposition for Hydrogen Production. [Citation Index Journal]

Sing, C. Y. and Aris, M. Shiraz and Al-Kayiem, Hussain H. (2013) Experimental Investigations on the Characteristics of Biomass and Coal-Biomass Fuel Briquettes. [Citation Index Journal]

Vasant, Pandian (2008) Possibilistic optimization in planning decision of construction industry. [Citation Index Journal]