Items where Department / MOR is "Petroleum Engineering" and Year is 2017

Adha, K. and Wan Yusoff, W.I. and Lubis, L.A. (2017) Investigation of Thermophysical Parameters Properties for Enhancing Overpressure Mechanism Estimation. Case Study: Miri Area, West Baram Delta. IOP Conference Series: Earth and Environmental Science, 88 (1).

Affandhie, B.A. and Kurniasari, P.T. and Darmawan, M.S. and Subekti, S. and Wibowo, B. and Husin, N.A. and Bayuaji, R. and Irawan, S. (2017) The effects of bottom ash on setting time and compressive strength of fly ash geopolymer paste. IOP Conference Series: Materials Science and Engineering, 267 (1).

Ahmed, A.A. and Saaid, I.M. and Akhir, N.A.M. (2017) Graft Copolymerization of N-Isopropylacrylamide and Acrylic Acid on Bentonite Colloids for In-Depth Fluid Diversion. Energy and Fuels, 31 (4). pp. 3537-3545.

Ahmed, S. and Elraies, K.A. and Forooozesh, J. and Bt Mohd Shafian, S.R. and Hashmet, M.R. and Hsia, I.C.C. and Almansour, A. (2017) Experimental investigation of immiscible supercritical carbon dioxide foam rheology for improved oil recovery. Journal of Earth Science, 28 (5). pp. 835-841.

Ahmed, S. and Elraies, K.A. and Tan, I.M. and Hashmet, M.R. (2017) Experimental investigation of associative polymer performance for CO2 foam enhanced oil recovery. Journal of Petroleum Science and Engineering, 157. pp. 971-979.

Akbari, S. and Mahmood, S.M. and Tan, I.M. and Bharadwaj, A.M. and Hematpour, H. (2017) Experimental investigation of the effect of different process variables on the viscosity of sulfonated polyacrylamide copolymers. Journal of Petroleum Exploration and Production Technology, 7 (1). pp. 87-101.

Akbari, S. and Mahmood, S.M. and Tan, I.M. and Ling, O.L. and Ghaedi, H. (2017) Effect of aging, antioxidant, and mono- and divalent ions at high temperature on the rheology of new polyacrylamide-based co-polymers. Polymers, 9 (10).

Alashloo, S.Y.M. and Ghosh, D.P. and Bashir, Y. and Yusoff, W.I.W. (2017) Depth Imaging Enhancement Using Reverse Time Migration. IOP Conference Series: Earth and Environmental Science, 88 (1).

Anak Penguang, A.S. and Lubis, L.A. and Hermana, M. and Ghosh, D.P. (2017) Study of Rock Physics and Seismic Attributes of Hydrocarbon Reservoirs in Sabah Basin. IOP Conference Series: Earth and Environmental Science, 88 (1).

Bashir, Y. and Ghosh, D.P. and Alashloo, S.Y.M. and Sum, C.W. (2017) Importance of Seismic Diffractions for Fractures Imaging. IOP Conference Series: Earth and Environmental Science, 88 (1).

Bataee, M. and Irawan, S. and Namazi-saleh, F. and Ridha, S. (2017) Development of stress model near the wellbore using an iterative coupling method. International Journal of Geomechanics, 17 (2).

Bataee, M. and Irawan, S. and Ridha, S. and Hematpour, H. and Hamdi, Z. (2017) Wellbore failure during water-alternating-gas injection by use of flow-stress coupling method. SPE Journal, 22 (1). pp. 172-183.

Chai, Y.H. and Yusup, S. and Chok, V.S. and Irawan, S. and Singh, J.D.B.S. and Chin, B.L.F. (2017) Comparison of rheological properties of graphene / carbon nanotube hydrogenated oil based biodegradable drilling fluid. IOP Conference Series: Materials Science and Engineering, 206 (1).

Chai, Y.H. and Yusup, S. and Chok, V.S. and Irawan, S. and Singh, J.S.D.B. (2017) Thermophysical properties of graphene nanosheets – Hydrogenated oil based nanofluid for drilling fluid improvements. Applied Thermal Engineering, 122. pp. 794-805.

Danaei, S. and Hermana, M. and Ghosh, D.P. (2017) 4D seismic reservoir surveillance for a field located in Malaysian basins using different time-lapse seismic attributes. 79th EAGE Conference and Exhibition 2017.

Djuraev, U. and Jufar, S.R. and Vasant, P. (2017) A review on conceptual and practical oil and gas reservoir monitoring methods. Journal of Petroleum Science and Engineering, 152. pp. 586-601.

Ghasemi, M. and Ahmad, A. and Jafary, T. and Azad, A.K. and Kakooei, S. and Wan Daud, W.R. and Sedighi, M. (2017) Assessment of immobilized cell reactor and microbial fuel cell for simultaneous cheese whey treatment and lactic acid/electricity production. International Journal of Hydrogen Energy, 42 (14). pp. 9107-9115.

Hematpour, H. and Mahmood, S.M. and Akbari, S. and Nasr, N.H. (2017) Comparison study on sag foam model parameters in different reservoir simulators. Journal of Engineering and Applied Sciences, 12 (21). pp. 5373-5378.

Hidayat, M.I.P. and Irawan, S. and Abdullah, M.Z. (2017) Effect of casing imperfection on the casing strength in steam injection wells. IOP Conference Series: Materials Science and Engineering, 267 (1).

Iqbal, O. and Ahmad, M. and Abd Kadir, A.P.A. (2017) Geomechanical characterization of potential roseneath shale gas, Cooper basin, Australia. ARPN Journal of Engineering and Applied Sciences, 12 (17). pp. 5221-5231.

Irawan, S. and Kinif, B.I. and Bayuaji, R. (2017) Maximizing drilling performance through enhanced solid control system. IOP Conference Series: Materials Science and Engineering, 267 (1).

Irawan, S. and Permatasari, K.A. and Bayuaji, R. (2017) Effect of density and resistivity measurement for foam flooding propagation in static condition. IOP Conference Series: Materials Science and Engineering, 267 (1).

Jafary, T. and Aljlil, S.A. and Alam, J. and Ghasemi, M. (2017) Effect of the membrane type and resistance load on the performance of the microbial fuel cell: A step ahead of microbial desalination cell establishment. Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy, 96 (9). pp. 346-351.

Jafary, T. and Daud, W.R.W. and Ghasemi, M. and Kim, B.H. and Bakar, M.H.A. and Jahim, J.M. and Ismail, M. and Satar, I. and Kamaruzzaman, M.A. (2017) Assessment of recirculation batch mode of operation in bioelectrochemical system; a way forward for cleaner production of energy and waste treatment. Journal of Cleaner Production, 142. pp. 2544-2555.

Jafary, T. and Daud, W.R.W. and Ghasemi, M. and Kim, B.H. and Carmona-Martínez, A.A. and Bakar, M.H.A. and Jahim, J.M. and Ismail, M. (2017) A comprehensive study on development of a biocathode for cleaner production of hydrogen in a microbial electrolysis cell. Journal of Cleaner Production, 164. pp. 1135-1144.

Kanesan, D. and Ridha, S. and Rao, P. (2017) Formulation of geopolymer cement using mixture of slag and class f fly ash for oil well cementing. IOP Conference Series: Materials Science and Engineering, 201 (1).

Mahat, S.Q.A. and Mohd. Saaid, I. (2017) Development of anionic-cationic inhibitors for mitigating silicate scales during ASP flooding. Journal of Petroleum Science and Engineering, 149. pp. 701-706.

Majid, M.F.A. and Ismail, M.S. and Rahman, A.H.A. and Mohamed, M.A. (2017) Facies Distribution and Petrophysical Properties of Shoreface-Offshore Transition Environment in Sandakan Formation, NE Sabah Basin. IOP Conference Series: Earth and Environmental Science, 88 (1).

Maneth Wanniarachchi, W.A. and Gamage, R.P. and Perera, M.S.A. and Rathnaweera, T.D. and Gao, M. and Padmanabhan, E. (2017) Investigation of depth and injection pressure effects on breakdown pressure and fracture permeability of shale reservoirs: An experimental study. Applied Sciences (Switzerland), 7 (7).

Memon, M.K. and Elraies, K.A. and Al-Mossawy, M.I. (2017) Impact of new foam surfactant blend with water alternating gas injection on residual oil recovery. Journal of Petroleum Exploration and Production Technology, 7 (3). pp. 843-851.

Memon, M.K. and Shuker, M.T. and Elraies, K.A. (2017) Study of blended surfactants to generate stable foam in presence of crude oil for gas mobility control. Journal of Petroleum Exploration and Production Technology, 7 (1). pp. 77-85.

Mohamad, A.M. and Hamada, G.M. (2017) Determination techniques of Archie's parameters: A, m and n in heterogeneous reservoirs. Journal of Geophysics and Engineering, 14 (6). pp. 1358-1367.

Momeni, M. and Ridha, S. and Hosseiniz, S.J. and Liu, X. and Atashnezhad, A. and Ghaheri, S. (2017) Optimum drill bit selection by using bit images and mathematical investigation. International Journal of Engineering, Transactions B: Applications, 30 (11). pp. 1807-1813.

Narahari, M. and Soorapuraju, S.K.R. and Pendyala, R. and Pop, I. (2017) Transient two-dimensional natural convection flow of a nanofluid past an isothermal vertical plate using Buongiorno's model. International Journal of Numerical Methods for Heat and Fluid Flow, 27 (1). pp. 23-47.

Nasr, N.H. and Raza, A. and Mahmood, S.M. and Hematpour, E. (2017) Comparison of permeability correlations for different rock fabric. Journal of Engineering and Applied Sciences, 12 (7). pp. 1853-1858.

Negash, B.M. and Vel, A. and Elraies, K.A. (2017) Artificial neural network and inverse solution method for assisted history matching of a reservoir model. International Journal of Applied Engineering Research, 12 (11). pp. 2952-2962.

Nizamani, A.A. and Ismail, A.R. and Junin, R. and Dayo, A.Q. and Tunio, A.H. and Ibupoto, Z.H. and Sidek, M.A.M. (2017) Synthesis of titania-bentonite nanocomposite and its applications in water-based drilling fluids. Chemical Engineering Transactions, 56. pp. 949-954.

Ofei, T.N. and Bavoh, C.B. and Rashidi, A.B. (2017) Insight into ionic liquid as potential drilling mud additive for high temperature wells. Journal of Molecular Liquids, 242. pp. 931-939.

Pratama, E. and Ismail, M.S. and Ridha, S. (2017) Screening criteria of optimum carbon dioxide injection for enhanced coalbed methane recovery and prediction of carbon dioxide storage capacity: A case study in south sumatera basin, Indonesia. Chemical Engineering Transactions, 56. pp. 997-1002.

Pratama, E. and Ismail, M.S. and Ridha, S. and Buntoro, A. (2017) An alternative approach for dynamic modeling in a complexly structured and heterogeneous carbonate gas reservoir: a field case study. Arabian Journal of Geosciences, 10 (16).

Pratama, E. and Suhaili Ismail, M. and Ridha, S. (2017) An integrated workflow to characterize and evaluate low resistivity pay and its phenomenon in a sandstone reservoir. Journal of Geophysics and Engineering, 14 (3). pp. 513-519.

Ridha, S. and Pratama, E. and Ismail, Mohd.S. (2017) Performance assessment of CO2 sequestration in a horizontal well for enhanced coalbed methane recovery in deep unmineable coal seams. Chemical Engineering Transactions, 56. pp. 589-594.

Satar, I. and Daud, W.R.W. and Kim, B.H. and Somalu, M.R. and Ghasemi, M. (2017) Immobilized mixed-culture reactor (IMcR) for hydrogen and methane production from glucose. Energy, 139. pp. 1188-1196.

Sedighi, M. and Ghasemi, M. and Jahangiri, A. (2017) Catalytic performance of CeAPSO-34 molecular sieve with various cerium content for methanol conversion to olefin. Korean Journal of Chemical Engineering, 34 (4). pp. 997-1003.

Subekti, S. and Bayuaji, R. and Darmawan, M.S. and Husin, N.A. and Wibowo, B. and Anugraha, B. and Irawan, S. and DIbiantara, D. (2017) Review: Potential strength of fly ash-based geopolymer paste with substitution of local waste materials with higherature effect. IOP Conference Series: Materials Science and Engineering, 267 (1).

Sulaimon, A.A. and Adeyemi, B.J. and Rahimi, M. (2017) Performance enhancement of selected vegetable oil as base fluid for drilling HPHT formation. Journal of Petroleum Science and Engineering, 152. pp. 49-59.

Sulaimon, A.A. and Tajuddin, M.Z.M. (2017) Application of COSMO-RS for pre-screening ionic liquids as thermodynamic gas hydrate inhibitor. Fluid Phase Equilibria, 450. pp. 194-199.

Yaakob, A.B. and Sulaimon, A.A. (2017) Performance assessment of plant extracts as green demulsifiers. Journal of the Japan Petroleum Institute, 60 (4). pp. 186-193.

Yekeen, N. and Manan, M.A. and Idris, A.K. and Samin, A.M. and Risal, A.R. (2017) Experimental investigation of minimization in surfactant adsorption and improvement in surfactant-foam stability in presence of silicon dioxide and aluminum oxide nanoparticles. Journal of Petroleum Science and Engineering, 159. pp. 115-134.