Investigation of depth and injection pressure effects on breakdown pressure and fracture permeability of shale reservoirs: An experimental study

Maneth Wanniarachchi, W.A. and Gamage, R.P. and Perera, M.S.A. and Rathnaweera, T.D. and Gao, M. and Padmanabhan, E. (2017) Investigation of depth and injection pressure effects on breakdown pressure and fracture permeability of shale reservoirs: An experimental study. Applied Sciences (Switzerland), 7 (7).

Full text not available from this repository.
Official URL: https://www.scopus.com/inward/record.uri?eid=2-s2....

Abstract

The aim of this study was to identify the influence of reservoir depth on reservoir rock mass breakdown pressure and the influence of reservoir depth and injecting fluid pressure on the flow ability of reservoirs before and after the hydraulic fracturing process. A series of fracturing tests was conducted under a range of confining pressures (1, 3, 5 and 7 MPa) to simulate various depths. In addition, permeability tests were conducted on intact and fractured samples under 1 and 7 MPa confining pressures to determine the flow characteristic variations upon fracturing of the reservoir, depending on the reservoir depth and injecting fluid pressure. N2 permeability was tested under a series of confining pressures (5, 10, 15, 20 and 25 MPa) and injection pressures (1-10 MPa). According to the results, shale reservoir flow ability for gas movement may reduce with increasing injection pressure and reservoir depth, due to the Klinkenberg phenomenon and pore structure shrinkage, respectively. The breakdown pressure of the reservoir rock linearly increases with increasing reservoir depth (confining pressure). Interestingly, 81 permeability reduction was observed in the fractured rock mass due to high (25 MPa) confinement, which shows the importance of proppants in the fracturing process. © 2017 by the authors.

Item Type: Article
Impact Factor: cited By 2
Departments / MOR / COE: Division > Academic > Faculty of Geoscience & Petroleum Engineering > Petroleum Engineering
Depositing User: Mr Ahmad Suhairi Mohamed Lazim
Date Deposited: 20 Apr 2018 05:58
Last Modified: 20 Apr 2018 05:58
URI: http://scholars.utp.edu.my/id/eprint/19462

Actions (login required)

View Item
View Item