Items where Author is "Yusup, S."

Group by: Item Type | No Grouping

Number of items: 285.

Salleh, N.F. and Yusup, S. and Mandal, P.C. and Ruslan, M.S.H. (2023) Extraction of Metalloporphyrins Using Subcritical Toluene-Assisted Thermally Stable Ionic Liquid. Pertanika Journal of Science and Technology, 31 (4). pp. 1971-1990. ISSN 01287680

Kam, Y.L. and Agutaya, J.K.C.N. and Quitain, A.T. and Ogasawara, Y. and Sasaki, M. and Lam, M.K. and Yusup, S. and Assabumrungrat, S. and Kida, T. (2023) In-situ transesterification of microalgae using carbon-based catalyst under pulsed microwave irradiation. Biomass and Bioenergy, 168.

Suparmaniam, U. and Lam, M.K. and Lim, J.W. and Yusup, S. and Tan, I.S. and Lau, S.Y. and Kodgire, P. and Kachhwaha, S.S. (2023) Influence of environmental stress on microalgae growth and lipid profile: a systematic review. Phytochemistry Reviews, 22 (4). pp. 879-901. ISSN 15687767

Lim, H.Y. and Rashidi, N.A. and Othman, M.F.H. and Ismail, I.S. and Saadon, S.Z.A.H. and Chin, B.L.F. and Yusup, S. and Rahman, M.N. (2023) Recent advancement in thermochemical conversion of biomass to biofuel. Biofuels. ISSN 17597269

Ismail, I.S. and Othman, M.F.H. and Rashidi, N.A. and Yusup, S. (2023) Recent progress on production technologies of food wasteâ��based biochar and its fabrication method as electrode materials in energy storage application. Biomass Conversion and Biorefinery.

Chai, Y.H. and Mohamed, M. and Cheng, Y.W. and Chin, B.L.F. and Yiin, C.L. and Yusup, S. and Lam, M.K. (2023) A review on potential of biohydrogen generation through waste decomposition technologies. Biomass Conversion and Biorefinery, 13 (10). pp. 8549-8574. ISSN 21906815

Chai, Y.H. and Rashidi, N.A. and Mohamed, M. and Chin, B.L.F. and Yusup, S. (2022) Basic principles of CO2 capture and conversion technologies. Elsevier, pp. 25-61. ISBN 9780323898515; 9780323898881

Rashidi, N.A. and Chai, Y.H. and Yusup, S. (2022) Biomass Energy in Malaysia: Current Scenario, Policies, and Implementation Challenges. Bioenergy Research.

Rashidi, N.A. and Chai, Y.H. and Yusup, S. (2022) Biomass Energy in Malaysia: Current Scenario, Policies, and Implementation Challenges. Bioenergy Research, 15 (3). pp. 1371-1386.

Rashidi, N.A. and Chai, Y.H. and Ismail, I.S. and Othman, M.F.H. and Yusup, S. (2022) Biomass as activated carbon precursor and potential in supercapacitor applications. Biomass Conversion and Biorefinery.

Pandey, A. and Tiwari, B. and Pandey, A. and Yusup, S. (2022) CURRENT DEVELOPMENTS IN BIOTECHNOLOGY AND BIOENGINEERING: Deep Eutectic Solvents: Fundamentals and Emerging Applications. Elsevier, pp. 1-427. ISBN 9780323999052; 9780323999564

Lim, H.Y. and Tang, S.H. and Chai, Y.H. and Yusup, S. and Lim, M.T. (2022) Co-pyrolysis of plastics and food waste mixture under flue gas condition for bio-oil production. Sustainable Energy Technologies and Assessments, 54.

Osman, W.N.A.W. and Nawi, N.I.M. and Samsuri, S. and Bilad, M.R. and Yusup, S. (2022) Comparative Between Vertical and Horizontal Panel Orientation for Optimum Membrane Surface Patterning Effect. In: UNSPECIFIED.

Ameen, M. and Mohamed, M. and Mostapha, M. and Zafar, H.P. and Sher, F. and Yusup, S. (2022) Design strategies for the synthesis of deep eutectic solvents. Elsevier, pp. 21-48. ISBN 9780323999052; 9780323999564

Kabir Ahmad, R. and Anwar Sulaiman, S. and Yusup, S. and Sham Dol, S. and Inayat, M. and Aminu Umar, H. (2022) Exploring the potential of coconut shell biomass for charcoal production. Ain Shams Engineering Journal, 13 (1).

Rashidi, N.A. and Chai, Y.H. and Yusup, S. and Kathiravale, S. and Ismail, N.M.S. (2022) Gate-to-gate life cycle assessment of solid waste conversion of black aluminum dross to Î³-alumina as catalyst support for biofuel production. World Scientific Publishing Co. Pte. Ltd., pp. 113-133. ISBN 9789811245800; 9789811245794

Suparmaniam, U. and Lam, M.K. and Lim, J.W. and Yusup, S. and Tan, I.S. and Lau, S.Y. and Kodgire, P. and Kachhwaha, S.S. (2022) Influence of environmental stress on microalgae growth and lipid profile: a systematic review. Phytochemistry Reviews.

Othman, M.F.H. and Mohamad Azmi, H.H. and Rashidi, N.A. and Yusup, S. (2022) â��One-potâ�� synthesis of activated carbon â�� Graphene oxide polyethyleneimine-functionalized supported copper nanoparticles electrode for carbon dioxide reduction reaction. Materials Today: Proceedings.

Ismail, I.S. and Rashidi, N.A. and Yusup, S. (2022) Production and characterization of bamboo-based activated carbon through single-step H3PO4 activation for CO2 capture. Environmental Science and Pollution Research, 29 (9). pp. 12434-12440.

Yap, T.L. and Loy, A.C.M. and Chin, B.L.F. and Lim, J.Y. and Alhamzi, H. and Chai, Y.H. and Yiin, C.L. and Cheah, K.W. and Wee, M.X.J. and Lam, M.K. and Jawad, Z.A. and Yusup, S. and Lock, S.S.M. (2022) Synergistic effects of catalytic co-pyrolysis Chlorella vulgaris and polyethylene mixtures using artificial neuron network: Thermodynamic and empirical kinetic analyses. Journal of Environmental Chemical Engineering, 10 (3).

Lim, H.Y. and Yusup, S. (2022) Technology to convert biomass to biooil. Elsevier, pp. 25-40. ISBN 9780323852692; 9780323852708

Mostapha, M. and Mohamed, M. and Ameen, M. and Lam, M.K. and Yusup, S. (2022) Upgrading biocrudes derived from agricultural biomass into advanced biofuels: Perspective from Malaysia. Fuel, 323.

Rashidi, N.A. and Yusup, S. (2022) The insights of pet cokes/palm kernel shell activated carbon as CO2 adsorbent: equilibrium, kinetics, thermodynamics, and regeneration performance. Journal of Chemical Technology and Biotechnology.

Hussain, M. and Zabiri, H. and Tufa, L.D. and Yusup, S. and Ali, I. (2022) A kinetic study and thermal decomposition characteristics of palm kernel shell using model-fitting and model-free methods. Biofuels, 13 (1). pp. 105-116.

Rianawati, E. and Yusup, S. and Fuichin, B.L. and Unrean, P. and Acda, M.N. and Gracia, E. and Auliaannisaa, S. and Utomo, M.H. and Ayu, P.M. (2021) Challenges for sustainable biofuel industry development in Indonesia and Malaysia: A policy recommendation. In: UNSPECIFIED.

Chuah, L.F. and Bokhari, A. and Yusup, S. and KlemeÅ¡, J.J. and Akbar, M.M. and Saminathan, S. (2021) Correction to: Optimisation on pretreatment of kapok seed (Ceiba pentandra) oil via esterification reaction in an ultrasonic cavitation reactor (Biomass Conversion and Biorefinery, (2017), 7, 1, (91-99), 10.1007/s13399-016-0207-9). Biomass Conversion and Biorefinery, 11 (6). p. 3071.

Kabir Ahmad, R. and Anwar Sulaiman, S. and Yusup, S. and Sham Dol, S. and Inayat, M. and Aminu Umar, H. (2021) Exploring the potential of coconut shell biomass for charcoal production. Ain Shams Engineering Journal.

Cheng, Y.W. and Chong, C.C. and Lam, M.K. and Leong, W.H. and Chuah, L.F. and Yusup, S. and Setiabudi, H.D. and Tang, Y. and Lim, J.W. (2021) Identification of microbial inhibitions and mitigation strategies towards cleaner bioconversions of palm oil mill effluent (POME): A review. Journal of Cleaner Production, 280.

Loy, A.C.M. and Alhazmi, H. and Lock, S.S.M. and Yiin, C.L. and Cheah, K.W. and Chin, B.L.F. and How, B.S. and Yusup, S. (2021) Life-cycle assessment of hydrogen production via catalytic gasification of wheat straw in the presence of straw derived biochar catalyst. Bioresource Technology, 341.

Dasa, Y.K. and Lam, M.-K. and Yusup, S. and Lim, J.-W. and Ho, Y.C. and Show, P.L. and Tan, I.-S. and Kiew, P.L. (2021) Microalgae Cultivation in Open Pond and Photobioreactor. Nova Science Publishers, Inc., pp. 27-49.

Hussain, M. and Zabiri, H. and Uddin, F. and Yusup, S. and Tufa, L.D. (2021) Pilot-scale biomass gasification system for hydrogen production from palm kernel shell (part A): steady-state simulation. Biomass Conversion and Biorefinery.

Hussain, M. and Zabiri, H. and Uddin, F. and Yusup, S. and Tufa, L.D. (2021) Pilot-scale biomass gasification system for hydrogen production from palm kernel shell (part B): dynamic and control studies. Biomass Conversion and Biorefinery.

Manaf, A.S.A. and Yusup, S. and Ho, C.Y. (2021) Potential of HMF production through thermochemical conversion and bioprocessing routes. In: UNSPECIFIED.

Atmowidjojo, A. and Rianawati, E. and Chin, B.L.F. and Yusup, S. and Quitain, A.T. and Assabumrungrat, S. and Yiin, C.L. and Kiatkittipong, W. and Srifa, A. and Eiad-Ua, A. (2021) Supporting Clean Energy in the ASEAN: Policy Opportunities from Sustainable Aviation Fuels Initiatives in Indonesia and Malaysia. In: UNSPECIFIED.

Shahbaz, M. and AlNouss, A. and Yusup, S. and Mckay, G. and Ansari, T.-A. (2021) Techno-economic evaluation of sorption enhanced steam gasification of PKS system for syngas using CaO for CO2 capture. Computer Aided Chemical Engineering, 50. pp. 129-134.

Chai, Y.H. and Mohamed, M. and Cheng, Y.W. and Chin, B.L.F. and Yiin, C.L. and Yusup, S. and Lam, M.K. (2021) A review on potential of biohydrogen generation through waste decomposition technologies. Biomass Conversion and Biorefinery.

Yamamoto, A. and Shinkai, T. and Loy, A.C.M. and Mohamed, M. and Baldovino, F.H.B. and Yusup, S. and Quitain, A.T. and Kida, T. (2020) Application of a solid electrolyte CO2 sensor to the performance evaluation of CO2 capture materials. Sensors and Actuators, B: Chemical, 315.

Bong, J.T. and Loy, A.C.M. and Chin, B.L.F. and Lam, M.K. and Tang, D.K.H. and Lim, H.Y. and Chai, Y.H. and Yusup, S. (2020) Artificial neural network approach for co-pyrolysis of Chlorella vulgaris and peanut shell binary mixtures using microalgae ash catalyst. Energy, 207.

Othman, M.F.H. and Rashidi, N.A. and Yusup, S. and Kida, T. (2020) Bifunctional graphene oxide-copper coated nickel mesh and its electrocatalysis towards ethanol production: A preliminary analysis. Materials Letters, 275.

Rashidi, N.A. and Yusup, S. (2020) Biochar as potential precursors for activated carbon production: parametric analysis and multi-response optimization. Environmental Science and Pollution Research, 27 (22). pp. 27480-27490.

Gurdeep Singh, H.K. and Yusup, S. and Quitain, A.T. and Abdullah, B. and Ameen, M. and Sasaki, M. and Kida, T. and Cheah, K.W. (2020) Biogasoline production from linoleic acid via catalytic cracking over nickel and copper-doped ZSM-5 catalysts. Environmental Research, 186.

Trinh, H. and Yusup, S. (2020) Conversion of rubber seed oil to biodiesel using continuous ultrasonic reactor. Elsevier, pp. 43-54.

Dasan, Y.K. and Lam, M.K. and Yusup, S. and Lim, J.W. and Show, P.L. and Tan, I.S. and Lee, K.T. (2020) Cultivation of Chlorella vulgaris using sequential-flow bubble column photobioreactor: A stress-inducing strategy for lipid accumulation and carbon dioxide fixation. Journal of CO2 Utilization, 41.

Chan, Y.H. and Loh, S.K. and Chin, B.L.F. and Yiin, C.L. and How, B.S. and Cheah, K.W. and Wong, M.K. and Loy, A.C.M. and Gwee, Y.L. and Lo, S.L.Y. and Yusup, S. and Lam, S.S. (2020) Fractionation and extraction of bio-oil for production of greener fuel and value-added chemicals: Recent advances and future prospects. Chemical Engineering Journal, 397.

Rosli, S.S. and Amalina Kadir, W.N. and Wong, C.Y. and Han, F.Y. and Lim, J.W. and Lam, M.K. and Yusup, S. and Kiatkittipong, W. and Kiatkittipong, K. and Usman, A. (2020) Insight review of attached microalgae growth focusing on support material packed in photobioreactor for sustainable biodiesel production and wastewater bioremediation. Renewable and Sustainable Energy Reviews, 134.

Cheah, K.W. and Yusup, S. and Taylor, M.J. and How, B.S. and Osatiashtiani, A. and Nowakowski, D.J. and Bridgwater, A.V. and Skoulou, V. and Kyriakou, G. and Uemura, Y. (2020) Kinetic modelling of hydrogen transfer deoxygenation of a prototypical fatty acid over a bimetallic Pd60Cu40catalyst: An investigation of the surface reaction mechanism and rate limiting step. Reaction Chemistry and Engineering, 5 (9). pp. 1682-1693.

Cheah, K.W. and Taylor, M.J. and Osatiashtiani, A. and Beaumont, S.K. and Nowakowski, D.J. and Yusup, S. and Bridgwater, A.V. and Kyriakou, G. (2020) Monometallic and bimetallic catalysts based on Pd, Cu and Ni for hydrogen transfer deoxygenation of a prototypical fatty acid to diesel range hydrocarbons. Catalysis Today, 355. pp. 882-892.

Minh Loy, A.C. and Yusup, S. and Chan, Y.H. and Borhan, A. and Lim, H.Y. and Minh Loy, A.C. and Yusup, S. and Chan, Y.H. and Borhan, A. and Lim, H.Y. and Shen How, B. and Fui Chin, B.L. (2020) Optimization Study of Syngas Production from Catalytic Air Gasification of Rice Husk. International Journal on Advanced Science, Engineering and Information Technology, 10 (5). pp. 1784-1791.

Loy, A.C.M. and Yusup, S. and How, B.S. and Chan, Y.H. and Chin, B.L.F. (2020) Optimization study of syngas production from catalytic air gasification of rice husk. Journal of Green Engineering, 10 (12). pp. 13256-13275.

Hashim, H. and Yusup, S. and Arlabosse, P. (2020) Prediction of Oil Yield from Oil Palm Mesocarp Using Thermally Assisted Mechanical Dewatering (TAMD). Energy, Environment, and Sustainability. pp. 65-75.

Bokhari, A. and Yusup, S. and Asif, S. and Chuah, L.F. and Michelle, L.Z.Y. (2020) Process intensification for the production of canola-based methyl ester via ultrasonic batch reactor: Optimization and kinetic study. Elsevier, pp. 27-42.

Mohd Laziz, A. and KuShaari, K. and Azeem, B. and Yusup, S. and Chin, J. and Denecke, J. (2020) Rapid production of biodiesel in a microchannel reactor at room temperature by enhancement of mixing behaviour in methanol phase using volume of fluid model. Chemical Engineering Science, 219.

Rashidi, N.A. and Yusup, S. (2020) Recent methodological trends in nitrogenâ��functionalized activated carbon production towards the gravimetric capacitance: A mini review. Journal of Energy Storage, 32.

Sajid, M. and Ayoub, M. and Yusup, S. and Abdullah, B. and Shamsuddin, R. and Bilad, R. and Chong, C.C. and Aqsha, A. (2020) Short-chain polyglycerol production via microwave-assisted solventless glycerol polymerization process over lioh-modified aluminium pillared clay catalyst: Parametric study. Processes, 8 (9).

Nabihah-Fauzi, N. and Asikin-Mijan, N. and Ibrahim, M.L. and Hashim, H. and Yusup, S. and Taufiq-Yap, Y.H. and Mastuli, M.S. (2020) Sulfonated SnO2nanocatalysts: Via a self-propagating combustion method for esterification of palm fatty acid distillate. RSC Advances, 10 (49). pp. 29187-29201.

Patrick, D.O. and Yusup, S. and Osman, N.B. and Zabiri, H. and Uemura, Y. and Shahbaz, M. (2020) Thermogravimetric kinetics of catalytic and non-catalytic pyrolytic conversion of palm kernel shell with acid treated coal bottom ash. In: UNSPECIFIED.

Ameen, M. and Azizan, M.T. and Ramli, A. and Yusup, S. and Abdullah, B. (2020) The effect of metal loading over Ni/Î³-Al2O3 and Mo/Î³-Al2O3 catalysts on reaction routes of hydrodeoxygenation of rubber seed oil for green diesel production. Catalysis Today, 355. pp. 51-64.

Chong, C.C. and Aqsha, A. and Ayoub, M. and Sajid, M. and Abdullah, A.Z. and Yusup, S. and Abdullah, B. (2020) A review over the role of catalysts for selective short-chain polyglycerol production from biodiesel derived waste glycerol. Environmental Technology and Innovation, 19.

Kueh, B.W.B. and Yusup, S. and Osman, N. and Ramli, N.H. (2019) Analysis of Melaleuca cajuputi extract as the potential herbicides for paddy weeds. Sustainable Chemistry and Pharmacy, 11. pp. 36-40.

Ameen, M. and Azizan, M.T. and Ramli, A. and Yusup, S. and Alnarabiji, M.S. (2019) Catalytic hydrodeoxygenation of rubber seed oil over sonochemically synthesized Ni-Mo/Î³-Al2O3 catalyst for green diesel production. Ultrasonics Sonochemistry, 51. pp. 90-102.

Loy, A.C.M. and Quitain, A.T. and Lam, M.K. and Yusup, S. and Sasaki, M. and Kida, T. (2019) Development of high microwave-absorptive bifunctional graphene oxide-based catalyst for biodiesel production. Energy Conversion and Management. pp. 1013-1025.

Mohamed, M. and Yusup, S. and Loy, A.C.M. (2019) Effect of Empty Fruit Bunch in Calcium Oxide for Cyclic CO2 Capture. Chemical Engineering and Technology, 42 (9). pp. 1840-1851.

Azarpour, A. and Zendehboudi, S. and Yusup, S. and Khalid, A. and Zhang, Y. (2019) Effects of ultrasonic cavitation on neutralization process of low molecular weight polyethylene glycol. Canadian Journal of Chemical Engineering, 97 (1). pp. 395-405.

Yusup, S. and Bokhari, A. and Trinh, H. and Shahbaz, M. and Patrick, D.O. and Cheah, K.W. and Azizan, M.T. and Ramli, A. and Ameen, M. and Osman, N. and Shuhaili, A.F.A. and Singh, H.K.G. (2019) Emerging technologies for biofuels production. Elsevier, pp. 45-76.

Ali, B. and Yusup, S. and Quitain, A.T. and Bokhari, A. and Kida, T. and Chuah, L.F. (2019) Heterogeneous catalytic conversion of rapeseed oil to methyl esters: Optimization and kinetic study. Elsevier, pp. 221-238.

Malik, S. and Fatima, F. and Imran, A. and Chuah, L.F. and KlemeÅ¡, J.J. and Khaliq, I.H. and Asif, S. and Aslam, M. and Jamil, F. and Durrani, A.K. and Akbar, M.M. and Shahbaz, M. and Usman, M. and Atabani, A.E. and Naqvi, S.R. and Yusup, S. and Bokhari, A. (2019) Improved project control for sustainable development of construction sector to reduce environment risks. Journal of Cleaner Production, 240.

Chan, Y.H. and Quitain, A.T. and Yusup, S. and Uemura, Y. and Sasaki, M. and Kida, T. (2019) Liquefaction of palm kernel shell to bio-oil using sub- and supercritical water: An overall kinetic study. Journal of the Energy Institute, 92 (3). pp. 535-541.

Bokhari, A. and Chuah, L.F. and Michelle, L.Z.Y. and Asif, S. and Shahbaz, M. and Akbar, M.M. and Inayat, A. and Jami, F. and Naqvi, S.R. and Yusup, S. (2019) Microwave enhanced catalytic conversion of canola-based methyl ester: Optimization and parametric study. Elsevier, pp. 153-166.

Chong, W.W.F. and Hamdan, S.H. and Wong, K.J. and Yusup, S. (2019) Modelling transitions in regimes of lubrication for rough surface contact. Lubricants, 7 (9).

Khan, Z. and Yusup, S. and Aslam, M. and Inayat, A. and Shahbaz, M. and Raza Naqvi, S. and Farooq, R. and Watson, I. (2019) NO and SO2 emissions in palm kernel shell catalytic steam gasification with in-situ CO2 adsorption for hydrogen production in a pilot-scale fluidized bed gasification system. Journal of Cleaner Production, 236.

Singh, H.K.G. and Yusup, S. (2019) Optimisation study of catalytic cracking of refined rubber seed oil for biogasoline production using response surface methodology. Springer International Publishing, pp. 171-185.

Ramli, N.H. and Yusup, S. and Quitain, A.T. and Johari, K. and Kueh, B.W.B. (2019) Optimization of saponin extracts using microwave-assisted extraction as a sustainable biopesticide to reduce Pomacea canaliculata population in paddy cultivation. Sustainable Chemistry and Pharmacy, 11. pp. 23-35.

Yim, S.C. and Chan, Y.H. and Yusup, S. and Johari, K. and Quitain, A.T. and Dailin, D.J. (2019) Supercritical extraction of value-added compounds from empty fruit bunch: An optimization study by response surface methodology. Elsevier, pp. 281-298.

Khan, Z. and Yusup, S. and Kamble, P. and Naqvi, M. and Watson, I. (2018) Assessment of energy flows and energy efficiencies in integrated catalytic adsorption steam gasification for hydrogen production. Applied Energy, 225. pp. 346-355.

Ramli, N.H. and Yusup, S. and Kueh, B.W.B. and Kamarulzaman, P.S.D. and Osman, N. and Abd. Rahim, M. and Aziz, R. and Mokhtar, S. and Ahmad, A.B. (2018) Effectiveness of biopesticides against brown planthopper (Nilaparvata lugens) in paddy cultivation. Sustainable Chemistry and Pharmacy, 8. pp. 16-20.

Kamarulzaman, P.S.D. and Yusup, S. and Osman, N. and Ramli@Yusof, N.H. and Kueh, B.W.B. and Talib, R. (2018) Effectiveness of neem based biopesticide to enhance rice (Oryza sativa) productivity. Sustainable Chemistry and Pharmacy, 7. pp. 36-40.

Chan, Y.H. and Yusup, S. and Quitain, A.T. and Chai, Y.H. and Uemura, Y. and Loh, S.K. (2018) Extraction of palm kernel shell derived pyrolysis oil by supercritical carbon dioxide: Evaluation and modeling of phenol solubility. Biomass and Bioenergy, 116. pp. 106-112.

Azizan, M.T. and Mellon, N. and Ramli, R.M. and Yusup, S. (2018) Improving teamwork skills and enhancing deep learning via development of board game using cooperative learning method in Reaction Engineering course. Education for Chemical Engineers, 22. pp. 1-13.

Cheah, K.W. and Yusup, S. and Kyriakou, G. and Ameen, M. and Taylor, M.J. and Nowakowski, D.J. and Bridgwater, A.V. and Uemura, Y. (2018) In-situ hydrogen generation from 1,2,3,4-tetrahydronaphthalene for catalytic conversion of oleic acid to diesel fuel hydrocarbons: Parametric studies using Response Surface Methodology approach. International Journal of Hydrogen Energy.

Khan, Z. and Yusup, S. and Ahmad, M.M. and Inayat, A. and Naqvi, M. and Sheikh, R. and Watson, I. (2018) Integrated catalytic adsorption steam gasification in a bubbling fluidized bed for enhanced H2 production: Perspective of design and pilot plant experiences. Biofuels, Bioproducts and Biorefining.

Mahmood, H. and Moniruzzaman, M. and Yusup, S. and Akil, H.M. (2018) Ionic liquid pretreatment at high solids loading: A clean approach for fabrication of renewable resource based particulate composites. Polymer Composites, 39 (6). pp. 1994-2003.

Gan, D.K.W. and Loy, A.C.M. and Chin, B.L.F. and Yusup, S. and Unrean, P. and Rianawati, E. and Acda, M.N. (2018) Kinetics and thermodynamic analysis in one-pot pyrolysis of rice hull using renewable calcium oxide based catalysts. Bioresource Technology, 265. pp. 180-190.

Chan, Y.H. and Quitain, A.T. and Yusup, S. and Uemura, Y. and Sasaki, M. and Kida, T. (2018) Liquefaction of palm kernel shell to bio-oil using sub- and supercritical water: An overall kinetic study. Journal of the Energy Institute.

Ng, Q.H. and Chin, B.L.F. and Yusup, S. and Loy, A.C.M. and Chong, K.Y.Y. (2018) Modeling of the co-pyrolysis of rubber residual and HDPE waste using the distributed activation energy model (DAEM). Applied Thermal Engineering, 138. pp. 336-345.

Trinh, H. and Yusup, S. and Uemura, Y. (2018) Optimization and kinetic study of ultrasonic assisted esterification process from rubber seed oil. Bioresource Technology, 247. pp. 51-57.

Chan, Y.H. and Quitain, A.T. and Yusup, S. and Uemura, Y. and Sasaki, M. and Kida, T. (2018) Optimization of hydrothermal liquefaction of palm kernel shell and consideration of supercritical carbon dioxide mediation effect. Journal of Supercritical Fluids, 133. pp. 640-646.

Adam, I.K. and Abdul Aziz, A.R. and Heikal, M.R. and Yusup, S. and Firmansyah and Ahmad, A.S. and Zainal Abidin, E.Z. (2018) Performance and emission analysis of rubber seed, palm, and their combined blend in a multi-cylinder diesel engine. Energies, 11 (6).

Rashidi, N.A. and Yusup, S. (2018) Production of palm kernel shell-based activated carbon by direct physical activation for carbon dioxide adsorption. Environmental Science and Pollution Research. pp. 1-15.

Kueh, B.W.B. and Yusup, S. and Osman, N. (2018) Supercritical carbon dioxide extraction of Melaleuca cajuputi leaves for herbicides allelopathy: Optimization and kinetics modelling. Journal of CO2 Utilization, 24. pp. 220-227.

Yiin, C.L. and Quitain, A.T. and Yusup, S. and Uemura, Y. and Sasaki, M. and Kida, T. (2018) Sustainable green pretreatment approach to biomass-to-energy conversion using natural hydro-low-transition-temperature mixtures. Bioresource Technology, 261. pp. 361-369.

Ali, B. and Yusup, S. and Quitain, A.T. and Alnarabiji, M.S. and Kamil, R.N.M. and Kida, T. (2018) Synthesis of novel graphene oxide/bentonite bi-functional heterogeneous catalyst for one-pot esterification and transesterification reactions. Energy Conversion and Management, 171. pp. 1801-1812.

Yiin, C.L. and Yusup, S. and Quitain, A.T. and Uemura, Y. and Sasaki, M. and Kida, T. (2018) Thermogravimetric analysis and kinetic modeling of low-transition-temperature mixtures pretreated oil palm empty fruit bunch for possible maximum yield of pyrolysis oil. Bioresource Technology, 255. pp. 189-197.

Loy, A.C.M. and Gan, D.K.W. and Yusup, S. and Chin, B.L.F. and Lam, M.K. and Shahbaz, M. and Unrean, P. and Acda, M.N. and Rianawati, E. (2018) Thermogravimetric kinetic modelling of in-situ catalytic pyrolytic conversion of rice husk to bioenergy using rice hull ash catalyst. Bioresource Technology, 261. pp. 213-222.

Mohamed, M. and Yusup, S. and Quitain, A.T. and Kida, T. (2018) Utilization of rice husk to enhance calcium oxide-based sorbent prepared from waste cockle shells for cyclic CO2 capture in high-temperature condition. Environmental Science and Pollution Research. pp. 1-15.

Loy, A.C.M. and Yusup, S. and Lam, M.K. and Chin, B.L.F. and Shahbaz, M. and Yamamoto, A. and Acda, M.N. (2018) The effect of industrial waste coal bottom ash as catalyst in catalytic pyrolysis of rice husk for syngas production. Energy Conversion and Management, 165. pp. 541-554.

Hussain, M. and Tufa, L.D. and Yusup, S. and Zabiri, H. (2018) A kinetic-based simulation model of palm kernel shell steam gasification in a circulating fluidized bed using Aspen PlusÂ®: A case study. Biofuels. pp. 1-12.

Ahmed, S. and Ramli, A. and Yusup, S. and Farooq, M. (2017) Adsorption behavior of tetraethylenepentamine-functionalized Si-MCM-41 for CO2 adsorption. Chemical Engineering Research and Design, 122. pp. 33-42.

Hussain, M. and Tufa, L.D. and Yusup, S. and Zabiri, H. and Taqvi, S.A. (2017) Aspen plus® simulation studies of steam gasification in fluidized bed reactor for hydrogen production using palm kernel shell. Communications in Computer and Information Science, 751. pp. 628-641.

Azmi, N. and Yusup, S. and Sabil, K.M. (2017) CO2 sorption on mesoporous solids: Effect of temperature and water content. Journal of Chemical and Engineering Data, 62 (1). pp. 456-462.

Naqvi, S.R. and Uemura, Y. and Yusup, S. and Nishiyama, N. and Naqvi, M. (2017) Catalytic Consequences of Micropore Topology on Biomass Pyrolysis Vapors over Shape Selective Zeolites. Energy Procedia, 105. pp. 557-561.

Yiin, C.L. and Quitain, A.T. and Yusup, S. and Uemura, Y. and Sasaki, M. and Kida, T. (2017) Choline chloride (ChCl) and monosodium glutamate (MSG)-based green solvents from optimized cactus malic acid for biomass delignification. Bioresource Technology, 244. pp. 941-948.

Mohammed, I.Y. and Lim, C.H. and Kazi, F.K. and Yusup, S. and Lam, H.L. and Abakr, Y.A. (2017) Co-pyrolysis of Rice Husk with Underutilized Biomass Species: A Sustainable Route for Production of Precursors for Fuels and Valuable Chemicals. Waste and Biomass Valorization, 8 (3). pp. 911-921.

Chai, Y.H. and Yusup, S. and Chok, V.S. and Irawan, S. and Singh, J.D.B.S. and Chin, B.L.F. (2017) Comparison of rheological properties of graphene / carbon nanotube hydrogenated oil based biodegradable drilling fluid. IOP Conference Series: Materials Science and Engineering, 206 (1).

Kiu, S.S.K. and Yusup, S. and Chok, V.S. and Taufiq, A. and Kamil, R.N.M. and Syahrullail, S. and Chin, B.L.F. (2017) Comparison on tribological properties of vegetable oil upon addition of carbon based nanoparticles. IOP Conference Series: Materials Science and Engineering, 206 (1).

Shahbaz, M. and Yusup, S. and Ammar, M. and Inayat, A. and Patrick, D.O. (2017) Development of process flow sheet for syngas production from sorption enhanced steam gasification of palm kernel shell. Chemical Engineering Transactions, 61. pp. 1675-1680.

Inayat, A. and Ahmad, M.M. and Mutalib, M.I.A. and Yusup, S. and Khan, Z. (2017) Economic analysis and optimization for bio-hydrogen production from oil palm waste via steam gasification. Energy Sources, Part B: Economics, Planning and Policy, 12 (2). pp. 158-165.

Mohamed, M. and Yusup, S. and Bustam, M.A. and Azmi, N. (2017) Effect of coal bottom ash & binder addition into CaO-based Sorbent on CO2capture performance. Chemical Engineering Transactions, 56. pp. 325-330.

Moniruzzaman, M. and Mahmood, H. and Yusup, S. and Akil, H.M. (2017) Exploring ionic liquid assisted pretreatment of lignocellulosic biomass for fabrication of green composite. Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy, 96 (9). pp. 376-379.

Shahbaz, M. and Yusup, S. and Naz, M.Y. and Sulaiman, S.A. and Inayat, A. and Partama, A. (2017) Fluidization of palm kernel shell, palm oil fronds, and empty fruit bunches in a swirling fluidized bed gasifier. Particulate Science and Technology, 35 (2). pp. 150-157.

Rahman, N.A. and Yusup, S. (2017) Gas condensate conversion into high octane gasoline. Journal of Engineering and Applied Sciences, 12 (Specia). pp. 5624-5629.

Alipour Moghadam Esfahani, R. and Osmieri, L. and Specchia, S. and Yusup, S. and Tavasoli, A. and Zamaniyan, A. (2017) H2-rich syngas production through mixed residual biomass and HDPE waste via integrated catalytic gasification and tar cracking plus bio-char upgrading. Chemical Engineering Journal, 308. pp. 578-587.

Ameen, M. and Azizan, M.T. and Yusup, S. and Ramli, A. (2017) Hydroprocessing of rubber seed oil over Ni-Mo/γ-Al2O3 for the green diesel production. Chemical Engineering Transactions, 61. pp. 1843-1848.

Chuah, L.F. and Klemeš, J.J. and Yusup, S. and Bokhari, A. and Akbar, M.M. (2017) Influence of fatty acids in waste cooking oil for cleaner biodiesel. Clean Technologies and Environmental Policy, 19 (3). pp. 859-868.

Gothandam, K.M. and Thakur, I.S. and Sukumaran, R.K. and Aguilar, C.N. and Yusup, S. (2017) International Conference on Current Trends in Biotechnology & post ICCB-2016 conference on Strategies for Environmental Protection and Management (ICSEPM-2016). Bioresource Technology, 242. p. 1.

Mahmood, H. and Moniruzzaman, M. and Yusup, S. and Muhammad, N. and Iqbal, T. and Akil, H.M. (2017) Ionic liquids pretreatment for fabrication of agro-residue/thermoplastic starch based composites: A comparative study with other pretreatment technologies. Journal of Cleaner Production, 161. pp. 257-266.

Chuah, L.F. and Klemeš, J.J. and Yusup, S. and Bokhari, A. and Akbar, M.M. and Chong, Z.K. (2017) Kinetic studies on waste cooking oil into biodiesel via hydrodynamic cavitation. Journal of Cleaner Production, 146. pp. 47-56.

Yim, S.C. and Quitain, A.T. and Yusup, S. and Sasaki, M. and Uemura, Y. and Kida, T. (2017) Metal oxide-catalyzed hydrothermal liquefaction of Malaysian oil palm biomass to bio-oil under supercritical condition. Journal of Supercritical Fluids, 120. pp. 384-394.

Chuah, L.F. and Bokhari, A. and Yusup, S. and Klemeš, J.J. and Akbar, M.M. and Saminathan, S. (2017) Optimisation on pretreatment of kapok seed (Ceiba pentandra) oil via esterification reaction in an ultrasonic cavitation reactor. Biomass Conversion and Biorefinery, 7 (1). pp. 91-99.

Shahbaz, M. and Yusup, S. and Inayat, A. and Patrick, D.O. and Pratama, A. and Ammar, M. (2017) Optimization of hydrogen and syngas production from PKS gasification by using coal bottom ash. Bioresource Technology, 241. pp. 284-295.

Trinh, H. and Yusup, S. and Uemura, Y. (2017) Optimization on pretreatment of rubber seed oil using microwave-assisted technique. Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy, 96 (8). pp. 314-318.

Adam, I.K. and Aziz, A.R.A. and Heikal, M.R. and Yusup, S. (2017) Performance and Emission Analysis of Rubber Seed Methyl Ester and Antioxidant in a Multicylinder Diesel Engine. Energy and Fuels, 31 (4). pp. 4424-4435.

Patrick, D.O. and Yusup, S. and Osman, N.B. and Zabiri, H. and Shahbaz, M. (2017) Performance of water-leached coal bottom ash as catalyst in Thermogravimetric Analyser (TGA) biomass gasification. Chemical Engineering Transactions, 61. pp. 1681-1686.

Yusuf, N.R. and Kamil, R.N.M. and Yusup, S. (2017) Physicochemical properties and structural characterisation of fatty acids derived from Jatropha curcas oil using microwave assisted alkaline hydrolysis. Journal of Physical Science, 28. pp. 269-279.

Bokhari, A. and Yusup, S. and Chuah, L.F. and Klemeš, J.J. and Asif, S. and Ali, B. and Akbar, M.M. and Kamil, R.N.M. (2017) Pilot scale intensification of rubber seed (Hevea brasiliensis) oil via chemical interesterification using hydrodynamic cavitation technology. Bioresource Technology, 242. pp. 272-282.

Khalil, I. and Aziz, A.R.A. and Yusup, S. and Heikal, M. and El-Adawy, M. (2017) Response surface methodology for the optimization of the production of rubber seed/palm oil biodiesel, IDI diesel engine performance, and emissions. Biomass Conversion and Biorefinery, 7 (1). pp. 37-49.

Chai, Y.H. and Yusup, S. and Chok, V.S. and Irawan, S. and Singh, J.S.D.B. (2017) Thermophysical properties of graphene nanosheets – Hydrogenated oil based nanofluid for drilling fluid improvements. Applied Thermal Engineering, 122. pp. 794-805.

Kiu, S.S.K. and Yusup, S. and Soon, C.V. and Arpin, T. and Samion, S. and Kamil, R.N.M. (2017) Tribological investigation of graphene as lubricant additive in vegetable oil. Journal of Physical Science, 28. pp. 257-267.

Mohammed, I.Y. and Abakr, Y.A. and Yusup, S. and Alaba, P.A. and Morris, K.I. and Sani, Y.M. and Kazi, F.K. (2017) Upgrading of Napier grass pyrolytic oil using microporous and hierarchical mesoporous zeolites: Products distribution, composition and reaction pathways. Journal of Cleaner Production, 162. pp. 817-829.

Mohammed, I.Y. and Abakr, Y.A. and Yusup, S. and Kazi, F.K. (2017) Valorization of Napier grass via intermediate pyrolysis: Optimization using response surface methodology and pyrolysis products characterization. Journal of Cleaner Production, 142. pp. 1848-1866.

Chuah, L.F. and Klemeš, J.J. and Yusup, S. and Bokhari, A. and Akbar, M.M. (2017) A review of cleaner intensification technologies in biodiesel production. Journal of Cleaner Production, 146. pp. 181-193.

Shahbaz, M. and Yusup, S. and Inayat, A. and Patrick, D.O. and Pratama, A. (2016) Application of response surface methodology to investigate the effect of different variables on conversion of palm kernel shell in steam gasification using coal bottom ash. Applied Energy, 184. pp. 1306-1315.

Ahmed, S. and Ramli, A. and Yusup, S. (2016) CO2 adsorption study on primary, secondary and tertiary amine functionalized Si-MCM-41. International Journal of Greenhouse Gas Control, 51. pp. 230-238.

Chuah, L.F. and Yusup, S. and Abd Aziz, A.R. and Bokhari, A. and Abdullah, M.Z. (2016) Cleaner production of methyl ester using waste cooking oil derived from palm olein using a hydrodynamic cavitation reactor. Journal of Cleaner Production, 112. pp. 4505-4514.

Bokhari, A. and Chuah, L.F. and Yusup, S. and KlemeÅ¡, J.J. and Akbar, M.M. and Kamil, R.N.M. (2016) Cleaner production of rubber seed oil methyl ester using a hydrodynamic cavitation: optimisation and parametric study. Journal of Cleaner Production, 136. pp. 31-41.

Babiker, M.E. and Aziz, A.R.A. and Heikal, M.R. and Yusup, S. and Adam, A. (2016) Effects of enhancing cetane number of ethanol fumigation on diesel engine performance and emissions. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12994-12999.

Lidu, S.R. and Mohamed, N.A. and KlemeÅ¡, J.J. and Varbanov, P.S. and Yusup, S. (2016) Evaluation of the energy saving opportunities for palm oil refining process: Sahabat Oil Products (SOP) in Lahad Datu, Malaysia. Clean Technologies and Environmental Policy, 18 (8). pp. 2453-2465.

Babiker, M.E. and Aziz, A.R.A. and Heikal, M. and Yusup, S. and Hagos, F.Y. (2016) Experimental and simulation study on steam gasification of phoenix-dactylifera date palm seeds. International Journal of Automotive and Mechanical Engineering, 13 (1). pp. 3201-3214.

Chuah, L.F. and Mohd Amin, M. and Yusup, S. and Raman, N.A. and Bokhari, A. and KlemeÅ¡, J.J. and Alnarabiji, M.S. (2016) Influence of green catalyst on transesterification process using ultrasonic-assisted. Journal of Cleaner Production, 136. pp. 14-22.

Chai, Y.H. and Yusup, S. and Chok, V.S. and Arpin, M.T. and Irawan, S. (2016) Investigation of thermal conductivity of multi walled carbon nanotube dispersed in hydrogenated oil based drilling fluids. Applied Thermal Engineering, 107. pp. 1019-1025.

Yusuf, N.R. and Kamil, R.N.M. and Yusup, S. (2016) Kinetic study of microwave-assisted alkaline hydrolysis of Jatropha curcas oil. In: UNSPECIFIED.

Yiin, C.L. and Yusup, S. and Quitain, A.T. and Sasaki, M. and Uemura, Y. and Kida, T. (2016) Microwave-assisted hydrothermal extraction of natural malic acid for the synthesis of low transition temperature mixtures. Journal of Cleaner Production, 113. pp. 919-924.

Shah, S.H. and Uemura, Y. and Yusup, S. and Kusakabe, K. and Mahmood, Q. and Ali, A. (2016) Nano-Structured Porous Yttria-Stabilized Zirconia Membrane for High-Temperature CO 2 Capture from H 2/ CO 2 Mixture. Arabian Journal for Science and Engineering, 41 (12). pp. 4763-4774.

Lim, C.H. and Mohammed, I.Y. and Abakr, Y.A. and Kazi, F.K. and Yusup, S. and Lam, H.L. (2016) Novel input-output prediction approach for biomass pyrolysis. Journal of Cleaner Production, 136. pp. 51-61.

Mahmood, H. and Moniruzzaman, M. and Yusup, S. and Akil, H.M. (2016) Pretreatment of oil palm biomass with ionic liquids: A new approach for fabrication of green composite board. Journal of Cleaner Production, 126. pp. 677-685.

Ahmad, M.M. and Inayat, A. and Chugani, L.M. and Yusup, S. (2016) Process simulation of hydrogen production from bio-oil using iCON. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 38 (5). pp. 730-736.

Yiin, C.L. and Yusup, S. and Mohamed, M. and Udomsap, P. and Yoosuk, B. and Sukkasi, S. (2016) Stabilization of empty fruit bunch derived bio-oil using solvents. Journal of Sustainable Development of Energy, Water and Environment Systems, 4 (1). pp. 38-47.

Mohammed, I.Y. and Abakr, Y.A. and Musa, M. and Yusup, S. and Singh, A. and Kazi, F.K. (2016) Valorization of Bambara groundnut shell via intermediate pyrolysis: Products distribution and characterization. Journal of Cleaner Production, 139. pp. 717-728.

Moniruzzaman, M. and Mahmood, H. and Kamiya, N. and Yusup, S. and Goto, M. (2015) Activity and stability of enzyme immobilized with ionic liquid based polymer materials. Journal of Engineering Science and Technology, 10. pp. 60-69.

Haleem, A.A. and Hashim, H. and Varbanov, P.S. and Yong, J.Y. and KlemeÅ¡, J.J. and Yusup, S. (2015) Case study: Optimisation of Federal Land Development Authority Jengka supply chain management using P-graph approach. Chemical Engineering Transactions, 45. pp. 1375-1380.

Wai, C.K. and Yusup, S. and Kapor, N.Z.A. and Chok, C. (2015) Catalytic pyrolysis of Oil Palm Frond (OPF) using Graphite Nanofiber (GNF) as catalysts. Chemical Engineering Transactions, 45. pp. 1543-1548.

Mazlan, M.A.F. and Uemura, Y. and Osman, N.B. and Yusup, S. (2015) Characterizations of bio-char from fast pyrolysis of Meranti wood sawdust. In: UNSPECIFIED.

Mahmood, H. and Moniruzzaman, M. and Yusup, S. and Akil, H.Md. (2015) Comparison of some biocomposite board properties fabricated from lignocellulosic biomass before and after Ionic liquid pretreatment. Chemical Engineering Transactions, 45. pp. 709-714.

Mohammed, I.Y. and Abakr, Y.A. and Kazi, F.K. and Yusup, S. and Alshareef, I. and Chin, S.A. (2015) Comprehensive characterization of Napier grass as a feedstock for thermochemical conversion. Energies, 8 (5). pp. 3403-3417.

Yusup, S. and Yiin, C.L. and Tan, C.J. and Abdullah, B. (2015) Determination of Optimum Condition for the Production of Rice Husk-Derived Bio-oil by Slow Pyrolysis Process. Wiley Blackwell, pp. 329-340.

Adam, I.K. and Aziz, A.R.A. and Yusup, S. (2015) Determination of diesel engine performance fueled biodiesel (Rubber seed/palm oil mixture) diesel blend. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2675-2685.

Ibrahim, F. and Moniruzzaman, M. and Yusup, S. and Uemura, Y. (2015) Dissolution of cellulose with ionic liquid in pressurized cell. Journal of Molecular Liquids, 211. pp. 370-372.

Chan, Y.H. and Yusup, S. and Quitain, A.T. and Tan, R.R. and Sasaki, M. and Lam, H.L. and Uemura, Y. (2015) Effect of process parameters on hydrothermal liquefaction of oil palm biomass for bio-oil production and its life cycle assessment. Energy Conversion and Management, 104. pp. 180-188.

Rashidi, N.A. and Yusup, S. (2015) Effect of process variables on the production of biomass-based activated carbons for carbon dioxide capture and sequestration. Chemical Engineering Transactions, 45. pp. 1507-1512.

Lim, C.H. and Mohammed, I.Y. and Abakr, Y.A. and Kazi, F.K. and Yusup, S. and Lam, H.L. (2015) Element characteristic tolerance for semi-batch fixed bed biomass pyrolysis. Chemical Engineering Transactions, 45. pp. 1285-1290.

Mazlan, M.A.F. and Uemura, Y. and Osman, N.B. and Yusup, S. (2015) Fast pyrolysis of hardwood residues using a fixed bed drop-type pyrolyzer. Energy Conversion and Management, 98. pp. 208-214.

Naqvi, S.R. and Uemura, Y. and Yusup, S. and Sugiura, Y. and Nishiyama, N. (2015) In situ catalytic fast pyrolysis of paddy husk pyrolysis vapors over MCM-22 and ITQ-2 zeolites. Journal of Analytical and Applied Pyrolysis, 114. pp. 32-39.

Chuah, L.F. and Yusup, S. and Abd Aziz, A.R. and Bokhari, A. and KlemeÅ¡, J.J. and Abdullah, M.Z. (2015) Intensification of biodiesel synthesis from waste cooking oil (Palm Olein) in a Hydrodynamic Cavitation Reactor: Effect of operating parameters on methyl ester conversion. Chemical Engineering and Processing: Process Intensification, 95. pp. 235-240.

Khan, Z. and Inayat, A. and Yusup, S. and Ahmad, M.M. (2015) Kinetic parameters determination using optimization approach in integrated catalytic adsorption steam gasification for hydrogen production. International Journal of Hydrogen Energy, 40 (29). pp. 8824-8832.

Inayat, A. and Ahmad, M.M. and Mutalib, M.I.A. and Yusup, S. and Khan, Z. (2015) MINLP optimization for heat integration of bio-hydrogen production from palm waste. Journal of Engineering Science and Technology, 10 (Spec.i). pp. 50-60.

Bokhari, A. and Chuah, L.F. and Yusup, S. and Ahmad, J. and Shamsuddin, M.R. and Teng, M.K. (2015) Microwave-assisted methyl esters synthesis of Kapok (Ceiba pentandra) seed oil: Parametric and optimization study. Biofuel Research Journal, 2 (3). pp. 281-287.

Shamsuddin, N.M. and Yusup, S. and Ibrahim, W.A. and Bokhari, A. and Chuah, L.F. (2015) Oil extraction from Calophyllum inophyllum L. via Soxhlet extraction: Optimization using response surface methodology (RSM). In: UNSPECIFIED.

Doraiselvan, K. and Yusup, S. and Wai, C.K. and Muda, N.S. (2015) Optimization studies on catalytic pyrolysis of empty fruit bunch (EFB) using L9 Taguchi Orthogonal Array. Chemical Engineering Transactions, 45. pp. 1639-1644.

Fui Chin, B.L. and Yusup, S. and Al Shoaibi, A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2015) Optimization study of catalytic co-gasification of rubber seed shell and high density polyethylene waste for hydrogen production using response surface methodology. Springer International Publishing, pp. 209-223.

Lieu, T. and Yusup, S. and Moniruzzaman, M. (2015) Parametric study of esterification of free fatty acids derived from Ceiba Pentandra seed oil using microwaveassisted technique via response surface methodology. Chemical Engineering Transactions, 45. pp. 931-936.

Yiin, C.L. and Yusup, S. and Quitain, A.T. and Uemura, Y. (2015) Physicochemical properties of low transition temperature mixtures in water. Chemical Engineering Transactions, 45. pp. 1525-1530.

Yusuf, N.R. and Kamil, R.N.M. and Yusup, S. (2015) Response surface methodology approach for optimisation of alkaline hydrolysis of Jatropha Curcas oil via microwave assisted. Chemical Engineering Transactions, 45. pp. 1513-1518.

Chan, Y.H. and Yusup, S. and Quitai, A.T. and Tan, R.R. and Uemura, Y. and Sasaki, M. and Lam, H.L. (2015) Studies on effect of process parameters variation on bio-oil yield in subcritical and supercritical hydrothermal liquefaction of malaysian oil palm biomass. Springer International Publishing, pp. 225-245.

Amin, M.M. and Yusup, S. (2015) Transesterification via direct-ultrasonic irradiation of rubber seed oil with waste materials based heterogeneous catalyst. Chemical Engineering Transactions, 45. pp. 1267-1272.

Mohamed, M. and Yusup, S. and Wahyudiono and Machmudah, S. and Goto, M. and Uemura, Y. (2015) Upgrading of oil palm empty fruit bunch to value-added products. Springer International Publishing, pp. 63-78.

Chai, Y.H. and Yusup, S. and Chok, V.S. (2015) A review on nanoparticle addition in base fluid for improvement of biodegradable ester-based drilling fluid properties. Chemical Engineering Transactions, 45. pp. 1447-1452.

Ramli, A. and Ahmed, S. and Yusup, S. (2014) Adsorption behaviour of Si-MCM-41 for C02: Effect of pressure and temperature on adsorption. In: UNSPECIFIED.

Ramli, A. and Ahmed, S. and Yusup, S. (2014) Adsorption behaviour of Si-MCM-41 for CO2: Effect of pressure and temperature on adsorption. Chemical Engineering Transactions, 39 (Specia). pp. 271-276.

Krishnan, V. and Uemura, Y. and Yusup, S. and Osman, N. (2014) Aspects of carbon dioxide mitigation by Nannochloropsis oculata cultured in a photobioreactor. Applied Mechanics and Materials, 625. pp. 775-779.

Chan, Y.H. and Yusup, S. and Quitain, A.T. and Uemura, Y. and Sasaki, M. (2014) Bio-oil production from oil palm biomass via subcritical and supercritical hydrothermal liquefaction. Journal of Supercritical Fluids, 95. pp. 407-412.

Herng, C.Y. and Yusup, S. and Quitain, A.T. and Uemura, Y. (2014) Bio-oil production under sub- and supercritical hydrothermal liquefaction of oil palm empty fruit bunch and Kernel Shell. Applied Mechanics and Materials, 625. pp. 881-884.

Ahmad, J. and Yusup, S. and Bokhari, A. and Kamil, R.N.M. (2014) Biodiesel production from the high free fatty acid â��hevea brasiliensisâ�� and fuel properties characterization. Applied Mechanics and Materials, 625. pp. 897-900.

Inayat, A. and Ahmad, M.M. and Yusup, S. and Mutalib, M.I.A. and Khan, Z. (2014) Biomass steam gasification for hydrogen production: A systematic review. Springer International Publishing, pp. 329-343.

Jamil, F. and Bawadi, B.A. and Ahmad, M.M. and Inayat, A. and Yusup, S. (2014) Catalytic cracking of synthetic bio-oil: Kinetic studies. Applied Mechanics and Materials, 625. pp. 259-262.

Chin, B.L.F. and Yusup, S. and Al Shoaibi, A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Comparative studies on catalytic and non-catalytic co-gasification of rubber seed shell and high density polyethylene mixtures. Journal of Cleaner Production, 70. pp. 303-314.

Loong, Y.C. and Yusup, S. and Uemura, Y. (2014) Delignification of empty fruit bunch (EFB) using low transition temperature mixtures (LTTMs): A review. Applied Mechanics and Materials, 625. pp. 741-744.

Mohamed, M. and Yusup, S. and Wahyudiono and Machmudah, S. and Goto, M. (2014) Effect of temperature on the extraction of bio-oil from oil palm mesocarp fiber using supercritical CO2. Jurnal Teknologi (Sciences and Engineering), 69 (4). pp. 39-42.

Rashidi, N.A. and Yusup, S. and Borhan, A. and Loong, L.H. (2014) Experimental and modelling studies of carbon dioxide adsorption by porous biomass derived activated carbon. Clean Technologies and Environmental Policy, 16 (7). pp. 1353-1361.

Chin, B.L.F. and Yusup, S. and Al Shoaibi, A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Gasification conversion and char reactivity of rubber seed shell and high density polyethylene mixtures using steam Co-Gasification process. Chemical Engineering Transactions, 39 (Specia). pp. 679-684.

Khan, Z. and Yusup, S. and Ahmad, M.M. and Chin, B.L.F. (2014) Hydrogen production from palm kernel shell via integrated catalytic adsorption (ICA) steam gasification. Energy Conversion and Management, 87. pp. 1224-1230.

Atnaw, S.M. and Sulaiman, S.A. and Yusup, S. (2014) Influence of fuel moisture content and reactor temperature on the calorific value of Syngas resulted from gasification of oil palm fronds. The Scientific World Journal, 2014.

Khan, Z. and Yusup, S. and Ahmad, M.M. and Rashidi, N.A. (2014) Integrated catalytic adsorption (ICA) steam gasification system for enhanced hydrogen production using palm kernel shell. International Journal of Hydrogen Energy, 39 (7). pp. 3286-3293.

Chin, B.L.F. and Yusup, S. and Al Shoaibi, A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Investigation of co-gasification of rubber seed shell and high density polyethylene mixtures. Chemical Engineering Transactions, 39 (Specia). pp. 505-510.

Alipour Moghadam, R. and Yusup, S. and Azlina, W. and Nehzati, S. and Tavasoli, A. (2014) Investigation on syngas production via biomass conversion through the integration of pyrolysis and air-steam gasification processes. Energy Conversion and Management, 87. pp. 670-675.

Lai Fui, B.C. and Yusup, S. and Shoaibi, A.A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Kinetic analysis on catalytic co-gasification of rubber seed shell and high density polyethylene mixtures. Applied Mechanics and Materials, 625. pp. 251-254.

Chin, B.L.F. and Yusup, S. and Al Shoaibi, A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Kinetic studies of co-pyrolysis of rubber seed shell with high density polyethylene. Energy Conversion and Management, 87. pp. 746-753.

Inayat, A. and Ahmad, M.M. and Mutalib, M.I.A. and Yusup, S. and Khan, Z. (2014) Mathematical modelling for hydrogen production from steam gasification of cellulose. Applied Mechanics and Materials, 625. pp. 176-179.

Bokhari, A. and Yusup, S. and Ahmad, J. and Kamil, R.N.M. (2014) Parametric study and improvement in fuel properties of pre-blended methyl esters from crude palm and rubber seed oil. Applied Mechanics and Materials, 625. pp. 494-497.

Adam, I.K. and Aziz, A.R.A. and Yusup, S. (2014) Performance and emission characteristics of an idi diesel engine fuelled biodiesel (Rubber Seed Oil and Palm Oil Mix) diesel blends. In: UNSPECIFIED.

Khan, Z. and Yusup, S. and Ahmad, M.M. (2014) Performance study of Ni catalyst with quicklime (CaO) as CO2 adsorbent in palm kernel shell steam gasification for hydrogen production. Advanced Materials Research, 917. pp. 283-291.

Ahmed, S. and Ramli, A. and Yusup, S. (2014) Physicochemical properties of Diethanolamine-functionalized Si-MCM-41. Applied Mechanics and Materials, 625. pp. 11-14.

Naqvi, S.R. and Uemura, Y. and Osman, N.B. and Yusup, S. and Nuruddin, M.F. (2014) Physiochemical properties of pyrolysis oil derived from fast pyrolysis of wet and dried rice husk in a free fall reactor. Applied Mechanics and Materials, 625. pp. 604-607.

Elsheikh, Y.A. and Man, Z. and Bustam, M.A. and Akhtar, F.H. and Yusup, S. and Muhammad, A. (2014) Preparation and characterisation of Citrulus colocynthis oil biodiesel: Optimisation of alkali-catalysed transesterification. Canadian Journal of Chemical Engineering, 92 (3). pp. 435-440.

Aljuboori, A.H.R. and Uemura, Y. and Osman, N.B. and Yusup, S. (2014) Production of a bioflocculant from Aspergillus niger using palm oil mill effluent as carbon source. Bioresource Technology, 171. pp. 66-70.

Yusup, S. (2014) Response to "comment on study of fuel properties of rubber seed oil based biodiesel" Energy Convers. Manage. 2014;78:266-275 by Ahmad et al. Energy Conversion and Management, 86. pp. 1189-1192.

Jamil, M.F. and Uemura, Y. and Osman, N. and Kusakabe, K. and Yusup, S. (2014) Review on extraction and characterization of castor seed oil. Applied Mechanics and Materials, 625. pp. 916-919.

Mazlan, M.A.F. and Uemura, Y. and Osman, N. and Yusup, S. (2014) Review on pyrolysis of hardwood residue to Biofuel. Applied Mechanics and Materials, 625. pp. 714-717.

Chan, Y.H. and Dang, K.V. and Yusup, S. and Lim, M.T. and Zain, A.M. and Uemura, Y. (2014) Studies on catalytic pyrolysis of empty fruit bunch (EFB) using Taguchi's L9 Orthogonal Array. Journal of the Energy Institute, 87 (3). pp. 227-234.

Dang, K.V. and Yusup, S. and Uemura, Y. (2014) Studies on pyrolysis of rice husk using Taguchi's l9 Orthogonal Array. Applied Mechanics and Materials, 625. pp. 630-634.

Moghadam, R.A. and Yusup, S. and Uemura, Y. and Chin, B.L.F. and Lam, H.L. and Al Shoaibi, A. (2014) Syngas production from palm kernel shell and polyethylene waste blend in fluidized bed catalytic steam co-gasification process. Energy, 75. pp. 40-44.

Abdullah, M.Z. and Yusup, S. and Mohd Bukhari, N.A. (2014) Synthesis and dehumidification performance of calcium chloride derived from the waste shells of Anadara granosa. Applied Mechanics and Materials, 625. pp. 924-927.

Mohamed, M. and Yusup, S. and Wahyudiono and Machmudah, S. and Goto, M. and Uemura, Y. (2014) Upgrading of oil palm empty fruit bunch to value-added products. Springer International Publishing, pp. 63-78.

Ng, W.P.Q. and Lam, H.L. and Yusup, S. (2014) Waste-to-wealth: Energy pack as an integrated biofuel. Chemical Engineering Transactions, 39 (Specia). pp. 925-930.

Singh, H.K.A.G. and Jaafar, A. and Yusup, S. (2014) The effect of sodium hydroxide on drag reduction using a biopolymer. In: UNSPECIFIED.

Babiker, M.E. and Aziz, A.R.A. and Heikal, M. and Yusup, S. (2014) The pyrolysis behavior of evolved species from date palm seeds. In: UNSPECIFIED.

Jamil, F. and Ahmad, M.M. and Yusup, S. (2013) Comparative study for catalytic cracking of model bio-oil and palm kernel shell derived bio-oil. Advanced Materials Research, 781-78. pp. 2476-2479.

Yusup, S. and Moghadam, R.A. and Shoaibi, A.A. and Melati, M. and Khan, Z. and Tzeng, L.M. and Wan Azlina, A.K.G.H. (2013) Hydrogen production from catalytic steam co-gasification of waste tyre and palm kernel shell in pilot scale fluidized bed gasifier. Nova Science Publishers, Inc., pp. 181-191.

Yun, H.M. and Ahmad, J. and Yusup, S. and Kamil, R.N.M. and Chok, V.S. and Tzeng, L.M. (2013) Improvement of low temperature properties of jatropha-corn biodiesel blend with the addition of acrylic Co-polymer. Advanced Materials Research, 781-78. pp. 2480-2483.

Rashidi, N.A. and Yusup, S. and Hameed, B.H. (2013) Kinetic studies on carbon dioxide capture using lignocellulosic based activated carbon. Energy, 61. pp. 440-446.

Atnaw, S.M. and Sulaiman, S.A. and Yusup, S. (2013) Syngas production from downdraft gasification of oil palm fronds. Energy, 61. pp. 491-501.

Ramli, A. and Ahmed, S. and Yusup, S. (2013) Synthesis and functionalization of Si-MCM-41 with amines. Nova Science Publishers, Inc., pp. 125-156.

Yusup, S. and Ahmad, M.M. and Uemura, Y. and Abu Bakar, S. and Nik Mohamad Kamil, R. and Quitain, A.T. and Shari, S. (2013) Utilization of Ceiba Pentandra seed oil as potential feedstock for biodiesel production. Nova Science Publishers, Inc., pp. 263-275.

This list was generated on Tue Dec 24 10:44:22 2024 +08.