Hydrogen production from catalytic steam co-gasification of waste tyre and palm kernel shell in pilot scale fluidized bed gasifier

Yusup, S. and Moghadam, R.A. and Shoaibi, A.A. and Melati, M. and Khan, Z. and Tzeng, L.M. and Wan Azlina, A.K.G.H. (2013) Hydrogen production from catalytic steam co-gasification of waste tyre and palm kernel shell in pilot scale fluidized bed gasifier. Nova Science Publishers, Inc., pp. 181-191.

Full text not available from this repository.
Official URL: https://www.scopus.com/inward/record.uri?eid=2-s2....

Abstract

In order to recover energy and recycle waste materials, an experimental study was performed on utilization of waste materials in catalytic steam gasification system. In current research, an alternative method of hydrogen production is achieved by blending of palm kernel shell (PKS) with waste tyre as a promising energy resource. Experiments were carried out at 600-800°C with steam/feedstock ratio (S/F) of 2-4 (kg/kg) and waste tyre/PKS ratio of 0-0.3 (kg/kg). This paper reports the results obtained from series of experiments that have been performed, on a pilot plant to improve hydrogen production efficiency. The highest H2 and total syngas content of 66.15 vol and 83.8 vol was achieved respectively under condition of 800°C and 30 wt of waste tyre blended with PKS and S/F ratio of 4 (kg/kg). The results obtained confirmed that mixtures of PKS and waste tyre in catalytic steam fluidized bed system produced a fuel gas with a calorific value of 14.76 MJ/Nm3 which has the potential to be utilised in engines. © 2013 by Nova Science Publishers, Inc. All rights reserved.

Item Type: Book
Impact Factor: cited By 2
Depositing User: Ms Sharifah Fahimah Saiyed Yeop
Date Deposited: 30 Mar 2022 01:10
Last Modified: 30 Mar 2022 01:10
URI: http://scholars.utp.edu.my/id/eprint/32952

Actions (login required)

View Item
View Item