Items where Author is "Ya, H.H."

Article

Ahmed, T. and Ya, H.H. and Majid, M.A.A. and Imran, M. and Khan, R. and Azeem, M. and Azad Alam, M. and Khalid, H.U. and Mehmood, A. (2023) The Study of Pseudo-ductile Polymer Nano Composite Reinforced with Non-treated Inorganic Nanofillers. Lecture Notes in Mechanical Engineering. pp. 981-992.

Ahmed, T. and Ya, H.H. and Alam, M.A. and Azeem, M. and Khan, M.R. and Sapuan, S.M. and Yusuf, M. and Afridi, J. (2023) Tribological and morphological properties of bentonite nano-clay/CaCO3 reinforced high-density polyethylene nanocomposites. Polymer Composites.

Azeem, M. and Ya, H.H. and Kumar, M. and Stabla, P. and Smolnicki, M. and Gemi, L. and Khan, R. and Ahmed, T. and Ma, Q. and Sadique, M.R. and Mokhtar, A.A. and Mustapha, M. (2022) Application of Filament Winding Technology in Composite Pressure Vessels and Challenges: A Review. Journal of Energy Storage, 49.

Azeem, M. and Ya, H.H. and Kumar, M. and Stabla, P. and Smolnicki, M. and Gemi, L. and Khan, R. and Ahmed, T. and Ma, Q. and Sadique, M.R. and Mokhtar, A.A. and Mustapha, M. (2022) Application of Filament Winding Technology in Composite Pressure Vessels and Challenges: A Review. Journal of Energy Storage, 49.

Alam, M.A. and Ya, H.H. and Azeem, M. and Yusuf, M. and Soomro, I.A. and Masood, F. and Shozib, I.A. and Sapuan, S.M. and Akhter, J. (2022) Artificial Neural Network Modeling to Predict the Effect of Milling Time and TiC Content on the Crystallite Size and Lattice Strain of Al7075-TiC Composites Fabricated by Powder Metallurgy. Crystals, 12 (3).

Alam, M.A. and Ya, H.H. and Azeem, M. and Yusuf, M. and Sapuan, S.M. and Masood, F. (2021) Investigating the effect of mixing time on the crystallite size and lattice strain of the AA7075/TiC composites Einfluss der Mischzeit auf die Kristallitgrö�e und die Gitterverzerrung von AA7075/TiC-Verbundwerkstoffen. Materialwissenschaft und Werkstofftechnik, 52 (10). pp. 1112-1120.

Alam, M.A. and Ya, H.H. and Yusuf, M. and Sivraj, R. and Mamat, O.B. and Sapuan, S.M. and Masood, F. and Parveez, B. and Sattar, M. (2021) Modeling, optimization and performance evaluation of tic/graphite reinforced al 7075 hybrid composites using response surface methodology. Materials, 14 (16).

Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2021) Stability Analysis of Partial Slip Texture Journal Bearing. Lecture Notes in Mechanical Engineering. pp. 217-225.

Supian, A.B.M. and Sapuan, S.M. and Zuhri, M.Y.M. and Zainudin, E.S. and Ya, H.H. (2020) Crashworthiness performance of hybrid kenaf/glass fiber reinforced epoxy tube on winding orientation effect under quasi-static compression load. Defence Technology, 16 (5). pp. 1051-1061.

Supian, A.B.M. and Sapuan, S.M. and Zuhri, M.Y.M. and Zainudin, E.S. and Ya, H.H. (2020) Crashworthiness performance of hybrid kenaf/glass fiber reinforced epoxy tube on winding orientation effect under quasi-static compression load. Defence Technology, 16 (5). pp. 1051-1061.

Khan, R. and Ya, H.H. and Pao, W. and Majid, M.A.A. and Ahmed, T. and Ahmad, A. and Alam, M.A. and Azeem, M. and Iftikhar, H. (2020) Effect of sand fines concentration on the erosion-corrosion mechanism of carbon steel 90� elbow pipe in slug flow. Materials, 13 (20). pp. 1-16.

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Ovinis, M. and Sultan, M.T.H. (2020) Experimental characterization of compression performance of carbon�basalt hybrid filament wound pipes before and after impact. Composites: Mechanics, Computations, Applications, 11 (1). pp. 25-38.

Alam, M.A. and Ya, H.H. and Hussain, P.B. and Azeem, M. and Sapuan, S.M. and khan , R. and Ahamad, T. (2020) Experimental investigations on the surface hardness of synthesized polystyrene/zno nanocomposites. Lecture Notes in Mechanical Engineering. pp. 345-352.

Alam, M.A. and Ya, H.H. and Hussain, P.B. and Azeem, M. and Sapuan, S.M. and khan , R. and Ahamad, T. (2020) Experimental investigations on the surface hardness of synthesized polystyrene/zno nanocomposites. Lecture Notes in Mechanical Engineering. pp. 345-352.

Khan, R. and Ya, H.H. and Pao, W. and Khan, A. and Zahoor, R. and Ahmed, T. (2020) Influence of elbow orientation on solid particle erosion for multiphase flow. Lecture Notes in Mechanical Engineering. pp. 695-701.

Khan, R. and Ya, H.H. and Pao, W. and Khan, A. and Zahoor, R. and Ahmed, T. (2020) Influence of elbow orientation on solid particle erosion for multiphase flow. Lecture Notes in Mechanical Engineering. pp. 695-701.

Khan, R. and Ya, H.H. and Pao, W. and Rao, T.V.V.L.N. and Alam, A. and Azeem, M. (2020) Investigation of maximum erosion zone in the horizontal 90° elbow. Lecture Notes in Mechanical Engineering. pp. 223-230.

Khan, R. and Ya, H.H. and Pao, W. and Rao, T.V.V.L.N. and Alam, A. and Azeem, M. (2020) Investigation of maximum erosion zone in the horizontal 90° elbow. Lecture Notes in Mechanical Engineering. pp. 223-230.

Alam, M.A. and Ya, H.H. and Azeem, M. and Hussain, P.B. and Salit, M.S.B. and Khan, R. and Arif, S. and Ansari, A.H. (2020) Modelling and optimisation of hardness behaviour of sintered Al/SiC composites using RSM and ANN: A comparative study. Journal of Materials Research and Technology, 9 (6). pp. 14036-14050.

Khan, M.R. and Ya, H.H. and Pao, W. and Majid, M.A.A. (2020) Numerical Investigation of Sand Particle Erosion in Long Radius Elbow for Multiphase Flow. Lecture Notes in Mechanical Engineering. pp. 41-49.

Ahmed, T. and Ya, H.H. and Khan, R. and Lubis, A.M.H.S. and Mahadzir, S. (2020) Pseudo-ductility, morphology and fractography resulting from the synergistic effect of CaCO3 and bentonite in HDPE polymer nano composite. Materials, 13 (15).

Rao, T.V.V.L.N. and A Rani, A.M. and Mohamed, N.M. and Ya, H.H. and Awang, M. and M Hashim, F. (2020) Static and stability analysis of partial slip texture multi-lobe journal bearings. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 234 (4). pp. 567-587.

Ahmed, T. and Ya, H.H. and Mahadzir, S. and Khan, R. and Alam, M.A. (2020) An overview: Mechanical and wear properties of hdpe polymer nanocomposites reinforced with treated/non-treated inorganic nanofillers. Lecture Notes in Mechanical Engineering. pp. 231-241.

Ahmed, T. and Ya, H.H. and Mahadzir, S. and Khan, R. and Alam, M.A. (2020) An overview: Mechanical and wear properties of hdpe polymer nanocomposites reinforced with treated/non-treated inorganic nanofillers. Lecture Notes in Mechanical Engineering. pp. 231-241.

Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2019) Analysis of magnetohydrodynamic partial slip laser bump texture slider and journal bearing. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 233 (12). pp. 1921-1938.

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Ovinis, M. (2019) Effects of carbon fiber hybridization on the compressive strength of glass-carbon/epoxy hybrid composite pipes before and after low velocity impact. Key Engineering Materials, 796. pp. 30-37.

Khan, R. and Ya, H.H. and Pao, W. (2019) Numerical investigation of the influence of sand particle concentration on long radius elbow erosion for liquid-solid flow. International Journal of Engineering, Transactions A: Basics, 32 (10). pp. 1485-1490.

Khan, R. and Ya, H.H. and Pao, W. (2019) Numerical investigation of the influence of sand particle concentration on long radius elbow erosion for liquid-solid flow. International Journal of Engineering, Transactions A: Basics, 32 (10). pp. 1485-1490.

Majid, M.A.A. and Ya, H.H. and Mamat, O. and Mahadzir, S. (2019) Techno economic evaluation of cold energy from Malaysian liquefied natural gas regasification terminals. Energies, 12 (23).

Khan, R. and Ya, H.H. and Pao, W. (2019) An experimental study on the erosion-corrosion performance of AISI 1018 carbon steel and AISI 304L stainless steel 90-degree elbow pipe. Metals, 9 (12).

Supian, A.B.M. and Sapuan, S.M. and Zuhri, M.Y.M. and Zainudin, E.S. and Ya, H.H. (2018) Hybrid reinforced thermoset polymer composite in energy absorption tube application: A review. Defence Technology.

Supian, A.B.M. and Sapuan, S.M. and Zuhri, M.Y.M. and Zainudin, E.S. and Ya, H.H. (2018) Hybrid reinforced thermoset polymer composite in energy absorption tube application: A review. Defence Technology.

Faez, K.M. and Hamdavi, S. and Rao, T.V.V.L.N. and Ya, H.H. and Mohamed, N.M. (2018) Performance analysis of grooved hydrodynamic journal bearing with multi- depth textured surface. International Journal of Vehicle Structures and Systems, 10 (2). pp. 142-145.

Faez, K.M. and Hamdavi, S. and Rao, T.V.V.L.N. and Ya, H.H. and Mohamed, N.M. (2018) Performance analysis of grooved hydrodynamic journal bearing with multi- depth textured surface. International Journal of Vehicle Structures and Systems, 10 (2). pp. 142-145.

Ya, H.H. and Luthfi, H. and Ngo, N.-T. and Hassan, S. and Pao, W. (2018) A Preliminary Experimental Investigation of Wet Fine Erosion in Two-Phase Flow. IOP Conference Series: Materials Science and Engineering, 328 (1).

Ya, H.H. and Luthfi, H. and Ngo, N.-T. and Hassan, S. and Pao, W. (2018) A Preliminary Experimental Investigation of Wet Fine Erosion in Two-Phase Flow. IOP Conference Series: Materials Science and Engineering, 328 (1).

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Baharom, M.A. (2017) Burst pressure investigation of filament wound type IV composite pressure vessel. AIP Conference Proceedings, 1901.

Abbas, T. and Ya, H.H. and Abdullah, M.Z. (2017) Comparison of Energy Absorption of Aluminium-composite Tubes Subjected to Axial Loading. IOP Conference Series: Materials Science and Engineering, 205 (1).

Abbas, T. and Ya, H.H. and Abdullah, M.Z. (2017) Effect of composite layers on partially wrapped Al-glass/epoxy hybrid tube subjected to axial load. AIP Conference Proceedings, 1901.

Abbas, T. and Ya, H.H. and Abdullah, M.Z. (2017) Experimental investigation of energy absorption of partially wrapped thin-walled aluminium-glass/epoxy tube subjected to quasi-static loading. Materials Science Forum, 904 MS. pp. 61-67.

Hamdavi, S. and Rao, T.V.V.L.N. and Muhammad, M. and Faez, K.M. and Ya, H.H. (2017) Linear stability analysis of short journal bearing with an axial groove: Lineare Stabilitätsanalyse von Kurzgleitlagern mit einer axialen Nut. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 210-217.

Faez, K.M. and Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. and Mohamed, N.M. (2017) Performance analysis of long grooved journal bearing with slip, no-slip, and slip/no-slip textured surface configurations. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5794-5798.

Abbas, T. and Ya, H.H. and Zaki, M. (2017) The effect of fiber angles on energy absorption of 50 partially wrapped aluminium-composite hybrid tube under axial crushing : Die Wirkung von Faserwinkeln auf die Energieabsorption von 50 teil-umhülltem Aluminium-Verbund-Hybridrohr unter axialer Stauchung. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 267-272.

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Mengal, A.N. (2016) Effect of low velocity impact on deformation behavior of metallic pressure vessel. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13319-13324.

Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. (2016) Effect of surface texturing on hydrodynamic performance of journal bearings. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 172-176.

Abbas, T. and Ya, H.H. and Abdullah, M.Z. (2016) Energy absorption capability of aluminium tube partially wrapped with glass/epoxy subjected to quasi-static loading. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14313-14318.

Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. and Faez, K.M. (2016) An analytical approach to investigate the effect of grooved surface on short journal bearing's performance. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12045-12049.

Faez, K.M. and Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. (2016) An analytical investigation of the grooved journal bearing's performance with slip/no-slip texture bearing. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12990-12993.

Ya, H.H. and El-Sobky, H. (2015) An experimental study on the behaviour of glass filled polypropylene and polyethylene composite pipes under quasi-static axial loading. Jurnal Teknologi, 74 (10). pp. 111-119.

Ya, H.H. and El-Sobky, H. (2015) An experimental study on the behaviour of glass filled polypropylene and polyethylene composite pipes under quasi-static axial loading. Jurnal Teknologi, 74 (10). pp. 111-119.

Conference or Workshop Item

Alam, M.A. and Ya, H.H. and Ahmad, A. and Yusuf, M. and Azeem, M. and Masood, F. (2021) Influence of aluminum addition on the mechanical properties of brass/Al composites fabricated by stir casting. In: UNSPECIFIED.

Alam, M.A. and Ya, H.H. and Ahmad, A. and Yusuf, M. and Azeem, M. and Masood, F. (2021) Influence of aluminum addition on the mechanical properties of brass/Al composites fabricated by stir casting. In: UNSPECIFIED.

Raheem, A. and Khan, R. and Mazhar, A.R. and Ya, H.H. and Alam, M.A. and Ahmed, T. and Azeem, M. (2021) A Review of Recent Studies of Dynamometers for Cutting Force Measurement in Machining Processes. In: UNSPECIFIED.

Book

Alam, M.A. and Sapuan, S.M. and Ya, H.H. and Hussain, P.B. and Azeem, M. and Ilyas, R.A. (2020) Application of biocomposites in automotive components: A review. Elsevier, pp. 1-17.