Items where Year is 2025

Group by: Creators | Item Type | No Grouping
Jump to: A | B | H | I | J | K | L | M | N | O | R | S | T | V
Number of items: 23.

A

Ahmed, Tauseef and Jose, Rajan and Alam, Md. Mehebub and Crispin, Reverant and Nuge, Tamrin and Raj, Vipin and Saheed, Mohamed Shuaib Mohamed (2025) Stretchable surfaces and electrodes for triboelectric nanogenerators: Challenges and opportunities. Nano Energy, 142. ISSN 22112855

Ahmed, Tauseef and Nuge, Tamrin and Khan, Muhammad Irfan and Khan, Lubna and Redzuan, Aein Afina and Sallih, Nabihah and Saheed, Mohamed Shuaib Mohamed (2025) Investigation of Morphology, Crystallization and Conductivity of Polyaniline based Electrospun Fibers. Journal of Advanced Research in Micro and Nano Engineering, 34 (1). 93 – 101. ISSN 27568210

Alameen, M. Basheer and Elraies, Khaled A. and Almansour, Abdullah and Mohyaldinn, Mysara and Agwu, Okorie E. (2025) An experimental study to control sand production in weakly consolidated sandstone formations: A chemical approach on formation strength. Results in Engineering, 27. ISSN 25901230

Ali, Aijaz and Bingi, Kishore and Ibrahim, Rosdiazli and Bansal, Lalit and Omar, Madiah (2025) Zynq-7000 FPGA-in-the-loop implementation of fractional-order PID controllers using a hybrid fixed-point and floating-point approach. Engineering Research Express, 7 (2). ISSN 26318695

Aromoye, Ibrahim Akinjobi and Hiung, Lo Hai and Sebastian, Patrick (2025) P-DETR: A transformer-based algorithm for pipeline structure detection. Results in Engineering, 26. ISSN 25901230

B

Bakthavatchalam, Balaji and Al-Doori, Ghassan F. and Algarni, Salem and Alqahtani, Talal and Rajamony, Reji Kumar and Habib, Khairul and Hussein, Omar A. and Barewar, Surendra D. (2025) Life cycle cost analysis of an innovative nanofluid assisted photovoltaic thermoelectric air conditioner for energy efficiency enhancement in buildings. Case Studies in Thermal Engineering, 73. ISSN 2214157X

Bheel, Naraindas and Baikerikar, Abhijeet Vidyadhar and Mohammed, Bashar S. (2025) Using Optimization Techniques on Mechanical Characteristics and Sustainability Assessment of Rubberized Concrete Blended with PVA Fiber Through Response Surface Methodology. International Journal of Concrete Structures and Materials, 19 (1). ISSN 19760485

H

Haque, Md Ashraful and Ahammed, Md Sharif and Rahaman, Md Shokor A. and Ahmed, Md Kawsar and Nahin, Kamal Hossain and Sawaran Singh, Narinderjit Singh and Rahman, Md Afzalur and Jaafar, Jafreezal and Al-Bawri, Samir Salem (2025) High Performance Quad Port Compact MIMO Antenna for 38 GHz 5G Application with Regression Machine Learning Prediction. Journal of Infrared, Millimeter, and Terahertz Waves, 46 (7). ISSN 18666892

Hussnain, S.M. and Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Choudhry, R.S. and Hussain, M.Z. (2025) Hygrothermal progressive damage model for resin-infused thermoplastic non-crimp fabric composites. International Journal of Solids and Structures, 317. ISSN 00207683

I

Ismael, Mhadi A. and Silmyi, Izz Rasyad and Mulk, Waqad Ul and El-Adawy, Mohammed and Aziz, A. Rashid A. and Babiker, M.Elamen and Nemitallah, Medhat A. (2025) The role of nanoparticles in combustion improvement: Performance and emission analysis of a DI diesel engine fuelled with water-in-biodiesel emulsions enhanced by mono and hybrid nanoparticles. Applied Thermal Engineering, 274. ISSN 13594311

J

Jamil, Abdullah and Baharom, M.B. and Tariq, Adeel and Azam, Farooq I. (2025) Validation of different turbulence models to analyse flow characteristics within a toroidal crank-rocker engine using particle image velocimetry. Alexandria Engineering Journal, 127. 705 – 721. ISSN 11100168

K

Khan, Umair and Pao, William and Pilario, Karl Ezra and Sallih, Nabihah and Sohail, Muhammad and Azam, Huzaifa (2025) Real-time automatic flow regime classification and mapping for vertical pipes using dynamic pressure signals. International Journal of Multiphase Flow, 189. ISSN 03019322

L

Li, Xuefeng and Elsiddieg, Awatif M.A. and Alqahtani, Aisha M. and Ben Ammar, Mohamed and Alzahrani, Ali and Hussien, Mohamed and Mahamad, Saipunidzam (2025) Numerical and experimental evaluation of temperature field and melt flow in keyhole laser welding of dissimilar duplex stainless steel and nickel base alloy. International Journal of Thermal Sciences, 214. ISSN 12900729

M

Musa, Musa Nasiru and Jirgi, Ghazali Musa and Zango, Zakariyya Uba and Isah, Marnawi Nasiru and Abdurrazak, Muhammad and Adamu, Adamu Ahmad and Wadi, Ismael A. and Adeleke, Adekunle Akanni and Garba, Zaharaddeen N. and Bello, Usman and Adamu, Haruna and Hosseini-Bandegharaei, Ahmad and Bokov, Dmitry Olegovich (2025) A review on techno-economic assessment of Spirulina for sustainable nutraceutical, medicinal, environmental, and bioenergy applications. Bioresources and Bioprocessing, 12 (1). ISSN 21974365

N

Najm, Mustafa Mohammed and Najm, Sarah Mohammed and Hmood, Jassim K. and Yit, Jing Ee and Al-Azzawi, Alabbas A. and Abdullah, Mohammed Najm and Harun, S.W. (2025) Effect of output coupling ratio on performance of Q-switched fiber laser based on MgQ2 organic saturable absorber. Optical Fiber Technology, 93. ISSN 10685200

Nallakukkala, Sirisha and Tackie-Otoo, Bennet Nii and Aliyu, Ruwaida and Lal, Bhajan and Nallakukkala, Jagadish Ram Deepak and Devi, Gayathri (2025) Application of machine learning algorithms to predict removal efficiency in treating produced water via gas hydrate-based desalination. Desalination, 612. ISSN 00119164

O

Oyebamiji, Damilare Samuel and Chandran, Davannendran and Raviadaran, Revathi (2025) Advancements in electrochemical energy storage: A review of biomass-derived separator, binder and electrolyte for electric vehicle battery. Results in Engineering, 27. ISSN 25901230

R

Raza, Hassan and Ullah, Sana and Akhtar, Awais and Gohar, Ghulam Abbas and Bello, Idris Temitope and Raza, Ali and Ahmed, Arslan (2025) Enhancing lithium-sulfur battery performance through the integration of six-metal high entropy oxides. Materials Letters, 393. ISSN 0167577X

S

Saeed, M Atif and Junejo, Faraz and Yahaya, Nor Zaihar and Meraj, Sheikh Tanzim and Amin, Imran and Mumtaz, Farhan (2025) Sustainable 90-degree slot milling of AZ31 alloy via two-stage hybrid optimization. International Journal of Advanced Manufacturing Technology, 138 (11). 5357 – 5385. ISSN 02683768

Sarwar, Umair and Mokhtar, Ainul Akmar and Muhammad, Masdi and Kaka, Shuaib and Behrani, Paras and Khan, Darya (2025) Finite Element Modelling of Mechano-electrochemical Effect of High Strength Steel Pipeline Corrosion. Journal of Advanced Research in Micro and Nano Engineering, 35 (1). 59 – 70. ISSN 27568210

Soomro, Hassan Ali and Khir, Mohd Haris Bin Md and Zulkifli, Saiful Azrin B M and Abro, Ghulam E Mustafa and Abualnaeem, Mohammad Madhat (2025) Applications of wide bandgap semiconductors in electric traction drives: Current trends and future perspectives. Results in Engineering, 26. ISSN 25901230

T

Talpur, Shabbir Ali and Thansirichaisree, Phromphat and Anotaipaiboon, Weerachai and Mohamad, Hisham and Zhou, Mingliang and Ejaz, Ali and Hussain, Qudeer and Saingam, Panumas and Chaimahawan, Preeda (2025) Data-driven prediction of failure loads in low-cost FRP-confined reinforced concrete beams. Composites Part C: Open Access, 17. ISSN 26666820

V

Verma, Aryan and Priyanka, P. and Khan, Tayyab and Singh, Karan and Yesufu, Lawal.O. and Ariffin, Mazeyanti Mohd and Ahmadian, Ali (2025) ScrutNet: a deep ensemble network for detecting fake news in online text. Social Network Analysis and Mining, 15 (1). ISSN 18695450

This list was generated on Mon Jul 7 17:03:35 2025 +08.