Browse by Type

Conference or Workshop Item

Md Jalil, Abdullah Al and Mat Isa, M Faudzi and Rostani, Khairul and Othman, Nurzatil Aqmar and M Shariff, Azmi and Lau, Kok Keong and Partoon, Behzad and Tay, Wee Horng (2019) Design and engineering implementation of blowdown system for cryogenic CO2-NG pilot facility. In: SPE Annual Technical Conference and Exhibition.

UEMURA, Yoshimitsu and Komiyama, Masaharu and others (2019) P-19 Characterization of solid product from torrefaction of oil palm fronds under biomass combustion atmosphere. In: Proceedings of the Conference on Biomass Science 第 14 �������学�議.

Taqvi, Syed Ali Ammar and Zabiri, Haslinda and Tufa, Lemma Dendena and Fatima, Syeda Anmol and Maulud, Abdul Halim Shah (2019) Distillation Column: Review of Major Disturbances. In: 2019 9th IEEE International Conference on Control System, Computing and Engineering (ICCSCE).

Nawaz, Muhammad and Maulud, Abdulhalim Shah and Zabiri, Haslinda (2019) Online process monitoring using multiscale principal component analysis. In: AIP Conference Proceedings.

Fatima, Syeda Anmol and Zabiri, Haslinda and Taqvi, Syed Ali Ammar and Ramli, Nasser (2019) System identification of industrial debutanizer column. In: 2019 9th IEEE international conference on control system, computing and engineering (ICCSCE).

Hasnen, SH and Zabiri, H and Prakash, KK and Mat, TT (2019) Adaptive PLS inferential soft sensor for continuous online estimation of NOx emission in industrial water-tube boiler. In: IOP Conference Series: Materials Science and Engineering.

Wongso, V and Sambudi, NS and Sufian, S and Abdullah, B and others (2019) The effect of pH in the synthesis of carbon quantum dots from rice husk on their photoluminescence properties. In: IOP Conference Series: Earth and Environmental Science.

Taqvi, Syed Ali Ammar and Zabiri, Haslinda and Tufa, Lemma Dendena and Fatima, Syeda Anmol and Maulud, Abdul Halim Shah (2019) Distillation Column: Review of Major Disturbances. In: 2019 9th IEEE International Conference on Control System, Computing and Engineering (ICCSCE).

Nawaz, Muhammad and Maulud, Abdulhalim Shah and Zabiri, Haslinda (2019) Online process monitoring using multiscale principal component analysis. In: AIP Conference Proceedings.

Azhari, Nurul Khaliesah Kamal and Pre, Pascaline and Hamon, Lomig and Bustam, Mohamad Azmi and Shariff, Azmi (2019) Magnesium-based Mteal Organic Framework 74 Carbon composite for CO2-CH4 separation. In: 8èmes Journées de l'Association Fran\caise de l'Adsorption.

Shariff, AM and Md Jalil, AA-M and Rostani, K and Othman, NA and Faudzi Mat Isa, M and Partoon, B and Lau, KK (2019) High CO2-natural gas depressurization via CO2 flow loop facility: Design & engineering implementation. In: Process Safety Spotlights 2019, Held at the 2019 AIChE Spring Meeting and 15th Global Congress on Process Safety.

Kim, Yoori and Yeom, Seungjong and Yoon, Sekwang and Kim, Jin-kuk and Kwon, Suhyoung and Hwang, Saebom and Shariff, Azmi B (2019) Development and demonstration of novel cryogenic distillation process for offshore gas platform. In: Offshore Technology Conference.

Shariff, Azmi M and Jalil, Abdullah Al Mubarak Md and Rostani, Khairul and Isa, M Faudzi B Mat and Othman, Nurzatil Aqmar (2019) Design & Engineering Implementation of Pressure Relieving System of Cryogenic Carbon Dioxide Pilot Facilities. In: 2019 Spring Meeting and 15th Global Congress on Process Safety.

Shafiqah, Mohd-Nasir Nor and Nguyen, Trinh Duy and Jun, Lau N and Bahari, Mahadi B and Phuong, Pham TT and Abdullah, Bawadi and Vo, Dai-Viet N (2019) Production of syngas from ethanol CO2 reforming on La-doped Cu/Al2O3: Impact of promoter loading. In: AIP Conference Proceedings.

Isa, F and Zabiri, H and Shaarif, MA (2019) CO2 removal via promoted potassium carbonate with glycine: solubility measurement at elevated pressure. In: IOP Conference Series: Materials Science and Engineering.

Biyanto, Totok R and Musyafa, Ali and Cordova, Hendra and Matradji and Prasetyo, Ajie and Zabiri, Haslinda and Sordi, Atiqah and Sapika, Nurul (2019) Comparison on PID controller performance for multivariable system between de-tuned method and optimization method. In: AIP Conference Proceedings.

Saafie, N and Samsudin, MFR and Sufian, S and Ramli, RM (2019) Enhancement of the activated carbon over methylene blue removal efficiency via alkali-acid treatment. In: AIP Conference Proceedings.

Wongso, V and Sambudi, NS and Sufian, S and Abdullah, B and others (2019) The effect of pH in the synthesis of carbon quantum dots from rice husk on their photoluminescence properties. In: IOP Conference Series: Earth and Environmental Science.

Choo, H.S. and Ooi, C.Y. and Inoue, M. and Ismail, N. and Moghbel, M. and Baskara Dass, S. and Kok, C.H. and Hussin, F.A. (2019) Machine-Learning-Based Multiple Abstraction-Level Detection of Hardware Trojan Inserted at Register-Transfer Level. In: Proceedings of the Asian Test Symposium.

Kok, C.H. and Ooi, C.Y. and Inoue, M. and Moghbel, M. and Baskara Dass, S. and Choo, H.S. and Ismail, N. and Hussin, F.A. (2019) Net Classification Based on Testability and Netlist Structural Features for Hardware Trojan Detection. In: UNSPECIFIED. (Submitted)

Yaqub, Muhammad Waqas and Pendyala, Rajashekhar and Rusli, Risza (2019) Oil-Water Phase Inversion in the Horizontal Section of Upstream 90° Bend during Gas-Oil-Water Three-Phase Flow. In: Key Engineering Materials.

Shariff, AM and Md Jalil, AA-M and Rostani, K and Othman, NA and Faudzi Mat Isa, M and Partoon, B and Lau, KK (2019) High CO2-natural gas depressurization via CO2 flow loop facility: Design & engineering implementation. In: Process Safety Spotlights 2019, Held at the 2019 AIChE Spring Meeting and 15th Global Congress on Process Safety.

Md Jalil, Abdullah Al and Mat Isa, M Faudzi and Rostani, Khairul and Othman, Nurzatil Aqmar and M Shariff, Azmi and Lau, Kok Keong and Partoon, Behzad and Tay, Wee Horng (2019) Design and engineering implementation of blowdown system for cryogenic CO2-NG pilot facility. In: SPE Annual Technical Conference and Exhibition.

Irfan, M. and Saad, N. and Ali, A. and Vinoth Kumar, K. and Aman Sheikh, M. and Awais, M. (2019) A Condition Monitoring System for the Analysis of Bearing Distributed Faults. In: UNSPECIFIED.

Ying, G.L. and Elamvazuthi, I. and Khan, M.K.A.A. and Parasuraman, S. (2019) Development of EMG based Upper Arm Exoskeleton. In: UNSPECIFIED.

Sheikh, M.A. and Saad, N.R. and Mohd Nor, N.B. and Tahir Rakhsh, S. and Irfan, M. (2019) An Unsupervised Automated Method to Diagnose Industrial Motors Faults. In: UNSPECIFIED.

Adil, S.H. and Ebrahim, M. and Ali, S.S.A. and Raza, K. (2019) Identifying Trends in Data Science Articles using Text Mining. In: UNSPECIFIED.

Mathe, R.P. and Ali, S.S.A. and Gilani, S.I.U.H. and Adil, S.H. and Ebrahim, M. (2019) Advanced Bio-Sensing System for Thermal Ambience Comfort. In: UNSPECIFIED.

Abro, A. and Sulaiman, S. and Mahamad, S. and Mean, F.O. and Awang Rambli, D.R. and Shuhaili, F.M. (2019) Assessing User Experience (UX) Interacting with Car Catalog Application Using Multi-touch Tabletop Display. In: UNSPECIFIED.

Ahmad, R. and Zakaria, M.N. and Abdullahi, A.U. (2019) Hadoop MapReduce's InputSplit based Indexing for Join Query Processing. In: UNSPECIFIED.

Kumar, P. and Norkakim, N.N. and Mohamed Saheed, M.S. and Burhanudin, Z.A. (2019) Optimization of CO2 laser power for patterning of single-layer graphene for advanced devices applications. In: UNSPECIFIED.

Xin, S.Q. and Yahya, N. and Izhar, L.I. (2019) Classification of Neurological States from Biosensor Signals Based on Statistical Features. In: UNSPECIFIED.

Memon, M. and Bajwa, U.A. and Ikhlas, A. and Memon, Y. and Memon, S. and Malani, M. (2019) Blockchain beyond Bitcoin: Block Maturity Level Consensus Protocol. In: UNSPECIFIED.

Roslan, N.S. and Izhar, L.I. and Feng, Y.X. and Faye, I. and Ho, E.T.W. and Rahman, M.A. (2019) An investigation of physiological correlates of neuroticism during speaking task: A preliminary study. In: UNSPECIFIED.

Ghazali, M.F. and Mohamad, H. (2019) Monitoring subsurface ground movement using fibre optic inclinometer sensor. In: UNSPECIFIED.

Qayyum, A. and Meriaudeau, F. and Chan, G.C.Y. (2019) Classification of atrial fibrillation with pretrained convolutional neural network models. In: UNSPECIFIED.

Tayeh, B.A. and Alaloul, W.S. and Alnairab, A.F. (2019) Challenges facing municipalities to provide wastewater services: A case study of Gaza strip. In: UNSPECIFIED.

Ani, M.N.C. and Kamaruddin, S. and Azid, I.A. (2019) Streamlining the flow of production system through elimination the waste of the overburden (muri) for manual handling process. In: UNSPECIFIED.

Liew, C.F. and Prakash, J. and Kamaruddin, S. and Ong, K.S. (2019) Deployment of an FMEA-Integrated Framework to Improve Operational Performance in Semiconductor Manufacturing: A Case Study. In: UNSPECIFIED.

Ofei, T.N. and Jalaludin, A.N. and Habte, A.D. and Lemma, T.A. and Ben-Awuah, J. (2019) Investigation of Plastering Effect in Casing-while-Drilling - A CFD Study. In: UNSPECIFIED.

Ahmad, J. and Mahamad, S. and Mohd Fadzil, N.S. (2019) Integrated mosquitoes repellent with ultrasound and frequency. In: UNSPECIFIED.

Ahmed, M.O. and Yenduri, A. and John, K.V. (2019) Evaluation of the dynamic responses of truss spar platforms for different mooring materials in intact and damaged line conditions. In: UNSPECIFIED.

Lee, S.C. and Tee, B.P. and Chong, M.F. and Ku Mahamud, K.M.S. and Mohamad, H. (2019) Structural assessment for an old steel railway bridge under static and dynamic loads using fibre optic sensors. In: UNSPECIFIED.

Haruna, A.A. and Muhammad, L.J. and Yahaya, B.Z. and Garba, E.J. and Oye, N.D. and Jung, L.T. (2019) An Improved C4.5 Data Mining Driven Algorithm for the Diagnosis of Coronary Artery Disease. In: UNSPECIFIED.

Hafeez, Y. and Ali, S.S.A. and Faraz, S. and Moinuddin, M. and Adil, S.H. (2019) Effect of Neurofeedback 2D and 3D Stimulus Content on Stress Mitigation. In: UNSPECIFIED.

Latif, W.M.S.M. and Sharbini, S.N. and Wan Sulaiman, W.R. and Idris, A.K. (2019) Utilization of silicon dioxide nanoparticles in foam enhanced oil recovery - A comprehensive review. In: UNSPECIFIED.

Vasudevan, M. and Murthe, S.S. and Yong, M.T.J. and Perumal, V. and Mohamed, N.M. and Gopinath, S.C.B. (2019) Facile Synthesis of Cellulose Acetate Nanofiber for Biosensing Application. In: UNSPECIFIED.

Patel, M.S. and Liew, M.S. and Mustaffa, Z. and Al-Yacouby, A.M. and Abdurrasheed, A.S. and Whyte, A. (2019) Downtime Cost Analysis of Offloading Operations Considering Vessel Motions and Mooring Responses in Malaysian Waters. In: UNSPECIFIED.

Rosli, N.S. and Ain Burhani, N.R. and Ibrahim, R. (2019) Predictive Maintenance of Air Booster Compressor (ABC) Motor Failure using Artificial Neural Network trained by Particle Swarm Optimization. In: UNSPECIFIED.

Kok, C.H. and Ooi, C.Y. and Inoue, M. and Moghbel, M. and Baskara Dass, S. and Choo, H.S. and Ismail, N. and Hussin, F.A. (2019) Net Classification Based on Testability and Netlist Structural Features for Hardware Trojan Detection. In: UNSPECIFIED.

Choo, H.S. and Ooi, C.Y. and Inoue, M. and Ismail, N. and Moghbel, M. and Baskara Dass, S. and Kok, C.H. and Hussin, F.A. (2019) Machine-Learning-Based Multiple Abstraction-Level Detection of Hardware Trojan Inserted at Register-Transfer Level. In: UNSPECIFIED.

Khan, Z. and Yahya, N. and Alsaih, K. and Meriaudeau, F. (2019) Zonal Segmentation of Prostate T2W-MRI using Atrous Convolutional Neural Network. In: UNSPECIFIED.

Thulasiraman, S. and Yunus, N.M.M. and Kumar, P. and Burhanudin, Z.A. and Wilfred, C.D. and Ariffin, A. and Hamdan, M.F. and Hamid, N.H. (2019) Characteristics of Asphaltenes Thin Film Extracted from Crude-Oil-Tank-Bottom-Sludge (COTBS). In: UNSPECIFIED.

Alsubal, S. and Sapari, N.B. and Harahap, I.S.H. and Ali Mohammed Al-Bared, M. (2019) A review on mechanism of rainwater in triggering landslide. In: UNSPECIFIED.

Thangarasu, G. and Dominic, P.D.D. and Subramanian, K. and Bin Othman, M. and Sokkalingam, R. (2019) An Efficient Energy Consumption Technique in Integrated WSN-IoT Environment Operations. In: UNSPECIFIED.

Al-Mossawy, M.I. (2019) A simple approach to identify the proper relative permeability model. In: UNSPECIFIED.

Baig, I. and Farooq, U. and Hasan, N.U. and Zghaibeh, M. and Jeoti, V. and Imran, M. (2019) A Low PAPR Universal Filtered Multi-Carrier System for 5G Machine Type Communications. In: UNSPECIFIED.

Syarafuddin Salam, S. and Mizamzul Mehat, N. and Kamaruddin, S. (2019) Optimization of Laminated Composites Characteristics via integration of Chamis Equation, Taguchi method and Principal Component Analysis. In: UNSPECIFIED.

Jung, L.T. and Haruna, A.A. (2019) Green data center by incentive-based job scheduling approach. In: UNSPECIFIED.

Ko, C.-E. and Chen, P.-H. and Liao, W.-M. and Lu, C.-K. and Lin, C.-H. and Liang, J.-W. (2019) Using A Cropping Technique or Not: Impacts on SVM-based AMD Detection on OCT Images. In: UNSPECIFIED.

Subramani, I.G. and Bin Ahmad Fauzi, I.A. and Perumal, V. (2019) Expeditious Fabrication Characterization of Metal Interdigitated Transducer on Polyimide film for Biosensing Application. In: UNSPECIFIED.

Mawardzi, M.F.R.M. and Japper-Jaafar, A. and Najib, M.S. and Daud, S.M. and Ya, T.M.Y.S.T. (2019) Intelligent classification of waxy crude oil odor-profile at different temperature. In: UNSPECIFIED.

Egambaram, A. and Badruddin, N. and Asirvadam, V.S. and Fauvet, E. and Stolz, C. and Begum, T. (2019) Unsupervised Eye Blink Artifact Identification in Electroencephalogram. In: UNSPECIFIED.

Qayyum, A. and Faye, I. and Malik, A.S. and Mazher, M. (2019) Assessment of cognitive load using multimedia learning and resting states with deep learning perspective. In: UNSPECIFIED.

Afrooz, I.E. and Ling Chuan Ching, D. (2019) Eulerian-Lagrangian Approach Evaluation for Numerically Prediction of Fluidized Bed Hydrodynamics. In: UNSPECIFIED.

Ejaz, M.M. and Tang, T.B. and Lu, C.-K. (2019) Autonomous Visual Navigation using Deep Reinforcement Learning: An Overview. In: UNSPECIFIED.

Anthony, L.S. and Perumal, V. (2019) Optimization of Metal Oxide Nanostructures via Two-Step Hydrothermal Synthesis. In: UNSPECIFIED.

Hamamoto, M. and Rahim Md Arshad, A. and Prasad Ghosh, D. (2019) Full waveform inversion based on genetic local search algorithm with hybrid-grid scheme. In: UNSPECIFIED.

Jatoi, M.A. and Kamel, N. and Gaho, A.A. and Dharejo, F.A. (2019) Bayesian Framework based Brain Source Localization Using High SNR EEG Data. In: UNSPECIFIED.

Al Fitri, M.R. and Oktiawati, U.Y. and Paputungan, I.V. (2019) Mobile based application design of wireless motion detection for home security. In: UNSPECIFIED.

Challa, P. and Sahith, S.J.K. and Rao, K.V. and Pedapati, S.R. (2019) Hydraulic modeling for upstream gas production planning and allocation - Significance, challenges, and recommendations. In: UNSPECIFIED.

Ismail, A. and Awang, M. and Rahman, F.A. and Megat Khalid, P.Z. and Baharudin, B.A. and Rojan, M.A. and Hamid, D.A. (2019) The Effects of Welding Parameters on Macro and Micro-Structure of Friction Stir Welded Aluminium. In: UNSPECIFIED.

Kim, Y. and Yeom, S. and Yoon, S. and Kim, J.-K. and Kwon, S. and Hwang, S. and Shariff, A.B. (2019) Development and demonstration of novel cryogenic distillation process for offshore gas platform. In: UNSPECIFIED.

Mazelan, F.N. and Kannan, R. and Hasan, K.N.M. and Ali, A. (2019) Multi-Input Power Converter for Renewable Energy Sources using Active Current Sharing Schemes. In: UNSPECIFIED.

Hamdi, Z. and Momeni, M.S. and Meyghani, B. and Zivar, D. and Chung, B.Y. and Bataee, M. and Asadian, M.A. (2019) Oil well compressive strength analysis from sonic log; A case study. In: UNSPECIFIED.

Sathasivam, L. and Elamvazuthi, I. and Khan, M.K.A.A. and Parasuraman, S. (2019) Tuning A Three-Phase Separator Level Controller via Particle Swarm OptimizationAlgorithm. In: UNSPECIFIED.

Fatima, S.A. and Zabiri, H. and Ammar Taqvi, S.A. and Ramli, N. (2019) System Identification of Industrial Debutanizer Column. In: UNSPECIFIED.

Soaid, N.I. and Mohamed Saheed, M.S. and Mohamed Saheed, M.S. and Mohamed, N.M. (2019) Effect of laser power on the formation of porous graphitic carbon on polyimide film. In: UNSPECIFIED.

Alazzawi, A.K. and Rais, H.M. and Basri, S. and Alsariera, Y.A. (2019) PhABC: A Hybrid Artificial Bee Colony Strategy for Pairwise test suite Generation with Constraints Support. In: UNSPECIFIED.

Junaid, M. and Witjaksono, G. (2019) Analysis of band gap in AA and Ab stacked bilayer graphene by Hamiltonian tight binding method. In: UNSPECIFIED.

Mazher, M. and Faye, I. and Qayyum, A. and Malik, A.S. (2019) Classification of resting and cognitive states using EEG-based feature extraction and connectivity approach. In: UNSPECIFIED.

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Hassan, S.M. and Elamvazuthi, I. and Devan, A.M. (2019) Design and Analysis of Fractional-order Oscillators Using Scilab. In: UNSPECIFIED.

Sharon, H. and Elamvazuthi, I. and Lu, C.K. and Parasuraman, S. and Natarajan, E. (2019) Classification of Rheumatoid Arthritis using Machine Learning Algorithms. In: UNSPECIFIED.

Mawardzi, M.F.R.M. and Japper-Jaafar, A. and Najib, M.S. and Daud, S.M. and Ya, T.M.Y.S.T. (2019) Classification of waxy crude oil odor-profile using gas sensor array. In: UNSPECIFIED.

Mizwar, I.K. and Napiah, M. and Sutanto, M.H. (2019) Thermal properties of cool asphalt concrete containing phase change material. In: UNSPECIFIED.

Naser Reda, M. and Spinnler, M. and Al-Kayiem, H. and Sattelmayer, T. (2019) Experimental investigation of temperature and condensation control of photovoltaic panels. In: UNSPECIFIED.

Mahzabin, M.S. and Jee Hock, L. and Siong Kang, L. and Nikbakht Jarghouyeh, E. (2019) Behaviour of kenaf fibre reinforced composite. In: UNSPECIFIED.

Shahzadi, I. and Meriadeau, F. and Tang, T.B. and Quyyum, A. (2019) CNN-LSTM: Cascaded framework for brain tumour classification. In: UNSPECIFIED.

Zahoor, F. and Zulkifli, T.Z.A. and Khanday, F.A. and Fida, A.A. (2019) Low-power RRAM Device based 1T1R Array Design with CNTFET as Access Device. In: UNSPECIFIED.

Babiker, A. and Faye, I. and Malik, A.S. and Sato, H. (2019) Studying the effect of lecture content on students� EEG data in classroom using SVD. In: UNSPECIFIED.

Tayeh, B.A. and Alaloul, W.S. and Al-Ghazalli, N.K. (2019) Tender pricing of infrastructure projects: Affecting factors. In: UNSPECIFIED.

Biswas, K. and Vasant, P.M. and Vintaned, J.A.G. and Watada, J. (2019) Metaheuristic Algorithm for Wellbore Trajectory Optimization. In: UNSPECIFIED.

Nagarajapandian, M. and Kanthalakshmi, S. and Anitha, T. and Devan, P.A.M. (2019) Linear Matrix Inequality Based Controller used in Multivariable Systems. In: UNSPECIFIED.

Tai, M.J.Y. and Vasudevan, M. and Perumal, V. and Liu, W.W. and Mohamed, N.M. (2019) Synthesis of Laser Scribed Graphene Electrode with Optimized Power for Biosensing. In: UNSPECIFIED.

Anitha, T. and Gopu, G. and Nagarajapandian, M. and Devan, P.A.M. (2019) Hybrid Fuzzy PID Controller for Pressure Process Control Application. In: UNSPECIFIED.

Singh, N. and Elamvazuthi, I. and Nallagownden, P. and Ramasamy, G. and Jangra, A. (2019) Communication Latency in Multi-agent System for Microgrid. In: UNSPECIFIED.

Bt Nasaruddin, N.S. and Aziz, I.A. and Rashid, N.A. (2019) Web-based electronic healthcare record system (EHRS) based on feedback. In: UNSPECIFIED.

Alam, M.K. and Aziz, A.A. and Latif, S.A. and Awang, A. (2019) Data Clustering Technique for In-Network Data Reduction in Wireless Sensor Network. In: UNSPECIFIED.

Alam, M.K. and Aziz, A.A. and Latif, S.A. and Awang, A. (2019) EEG Data Compression using Truncated Singular Value Decomposition for Remote Driver Status Monitoring. In: UNSPECIFIED.

Ammar Taqvi, S.A. and Zabiri, H. and Tufa, L.D. and Fatima, S.A. and Shah Maulud, A.H. (2019) Distillation Column: Review of Major Disturbances. In: UNSPECIFIED.

Chitturi, V. and Rao Pedapati, S. and Awang, M. (2019) A Review on Process Parameters and their effects on Dissimilar Friction Stir Welding of Aluminium and Steel Alloys. In: UNSPECIFIED.

Jakeri, M.M. and Hassan, M.F. (2019) Criteria Prioritization in Adaptive Security Activities Selection, ASAS Model using Analytic Network Process, ANP. In: UNSPECIFIED.

Kuo, W.-L. and Lee, H.-X. and Hsieh, S.-H. (2019) Designing a Database Schema for Supporting Visual Management of Variable Parameters in BIM Models. In: UNSPECIFIED.

Lin, C.-H. and Ng, C.L. and Wong, P.W. and Kuo, J.-T. (2019) Power divider and balun filters with a single cross-coupled quadruplet. In: UNSPECIFIED.

Omar, M.Y.B. and Rambli, D.R.A. and Sulaiman, S. and Shiratuddin, M.F. and Merienne, F. and Vanhalle, D. (2019) Proposed conceptual design model of persuasive game for upper limb for stroke rehabilitation. In: UNSPECIFIED.

Norzam, W.A.S. and Hawari, H.F. and Kamarudin, K. (2019) Analysis of Mobile Robot Indoor Mapping using GMapping Based SLAM with Different Parameter. In: UNSPECIFIED.

Nurhanim, K. and Elamvazuthi, I. and Izhar, L.I. and Capi, G. (2019) Feature selection of Human Daily Activities using Ensemble method Classification. In: UNSPECIFIED.

Atef, M. and Abdullah, M.F. and Khatib, T. and Romlie, M.F. (2019) Utilization of Artificial Neural Networks to Improve the Accuracy of a Hybrid Power System Model. In: UNSPECIFIED.

Basri, A.Q. and Mohamed, N.M.Z.N. and Yasir, K.A.S.H.M. and Fazi, H.M. and Fudzin, A.F. (2019) The validation of productivity on the changeover activity at the automotive stamping press line by comparing the embedded SMED frame-work versus SMED approach: A witness simulation case study. In: UNSPECIFIED.

Amirudin, N.A.B. and Saad, N. and Ali, S.S.A. and Adil, S.H. (2019) Detection and Analysis of Driver Drowsiness. In: UNSPECIFIED.

Iampita, I.M. and Hisham, S.B. (2019) Smith Predictor-based Controllers for Temperature Process with Time Delay. In: UNSPECIFIED.

Islam, J. and Vasant, P.M. and Negash, B.M. and Watada, J. (2019) A modified crow search algorithm with niching technique for numerical optimization. In: UNSPECIFIED.

Chong, J.S. and Lu, C.-K. and Tang, T.B. (2019) Study of emotional state effect on decision making by using fNIRS. In: UNSPECIFIED.

Meyghani, B. and Awang, M.B. and Momeni, M. and Rynkovskaya, M. (2019) Development of a Finite Element Model for Thermal Analysis of Friction Stir Welding (FSW). In: UNSPECIFIED.

Latif, N.A.A. and Abidin, I.M.Z. and Azaman, N. and Jamaludin, N. and Mokhtar, A.A. (2019) A Feature Extraction Technique Based on Factor Analysis for Pulsed Eddy Current Defects Categorization. In: UNSPECIFIED.

Meyghani, B. and Awang, M.B. and Poshteh, R.G.M. and Momeni, M. and Kakooei, S. and Hamdi, Z. (2019) The Effect of Friction Coefficient in Thermal Analysis of Friction Stir Welding (FSW). In: UNSPECIFIED.

Mansura, A. and Drieberg, M. and Aziz, A.A. and Bassoo, V. (2019) Multi-Energy Threshold-based Routing Protocol for Wireless Sensor Networks. In: UNSPECIFIED.

Aslam, M.Z. and Jeoti, V. and Karuppanan, S. and Chand, A. (2019) PZT based multilayer surface acoustic wave device for high frequency applications. In: UNSPECIFIED.

Yan, L.Z. and Fahmi Bin Hawari, H. and Witjaksono Bin Djaswadi, G. (2019) Room temperature interdigitated electrode acetone sensor based on SnO2-rGO hybrid composite. In: UNSPECIFIED.

Mohd Norhakim, N.N.H.B. and Arif Bin Burhanudin, Z. (2019) Correlation of charge neutrality point and ions capture in DNA-graphene field-effect transistor using drift-diffusion model. In: UNSPECIFIED.

Jakeri, M.M. and Hassan, M.F. (2019) A review of factors influencing the implementation of secure framework for in-house web application development in Malaysian public sector. In: UNSPECIFIED.

Permanasari, A.A. and Puspitasari, P. and Sukarni, S. and Irdianto, W. and Ginta, T.L. and Gilang, D. (2019) Thermophysical properties and heat transfer performance of TiO2-Distilled water nanofluid using shell and tube heat exchanger. In: UNSPECIFIED.

Kok, T.L. and Aldrich, C. (2019) Analysis of Electrochemical Noise for Corrosion Type Identification by Use of Global Recurrence Plots and Texture Analysis. In: UNSPECIFIED.

Devan, P.A.M. and Hussin, F.A. and Ibrahim, R. and Bingi, K. and Nagarajapandian, M. (2019) IoT Based Vehicle Emission Monitoring and Alerting System. In: UNSPECIFIED.

Tiong, M. and Gholami, R. and Rahman, M.E. and Irawan, S. (2019) An approach to enhance the durability and mechanical properties of Class G cement using nano materials. In: UNSPECIFIED.

Yew, K.-H. and Foong, O.-M. and Sivarajan, T.P. (2019) Knowledge-Based Improvement of Machine Downtime Management for IR4.0. In: UNSPECIFIED.

Kamble, R.M. and Kokare, M. and Chan, G.C.Y. and Perdomo, O. and González, F.A. and Müller, H. and Mériaudeau, F. (2019) Automated Diabetic Macular Edema (DME) analysis using fine tuning with inception-resnet-v2 on oct images. In: UNSPECIFIED.

Ahmed, A.Y. and Khir, M.H.M. and Dennis, J.O. and Rabih, A.A.S. (2019) Electrothermal Analysis of a MetalMUMPs Device for Acetone Detection. In: UNSPECIFIED.

Subhani, N. and Kannan, R. and Porkumaran, K. and Prasath, S. and Srinath, M. (2019) An Improved Modified Capacitor-Assisted Z-Source Inverter with Reduced Capacitor Voltage Stress and Inrush Start-up Current. In: UNSPECIFIED.

Bhaskarwar, T. and Chile, R. and Aole, S. and Elamvazuthi, I. (2019) Remote Monitoring of Coupled Tank Accompanied by PLC-OPC-MATLAB Architecture. In: UNSPECIFIED.

Suresh, K. and Jeoti, V. and Drieberg, M. and Iqbal, A. (2019) On Self Driving Cars: An LED Time of Flight (ToF) based Detection and Ranging using various Unipolar Optical CDMA Codes. In: UNSPECIFIED.

Isa, F. and Zabiri, H. and Shaarif, M.A. (2019) CO2 removal via promoted potassium carbonate with glycine: Solubility measurement at elevated pressure. In: UNSPECIFIED.

Yahya Al-Ashmori, Y. and Bin Othman, I. and Bin Mohamad, H. and Rahmawati, Y. and Napiah, M. (2019) Establishing the Level of BIM implementation - A Case Study in Melaka, Malaysia. In: UNSPECIFIED.

Lim, Y.P. and Toh, Y.L. and Cheab, S. and Ng, G.S. and Wong, P.W. (2019) Chained-Function Waveguide Filter for 5G and beyond. In: UNSPECIFIED.

Raza, A. and Capretz, L.F. and Basri, S.B. (2019) An Empirical Study of User Support Tools in Open Source Software. In: UNSPECIFIED.

Mansur, F.Z. and Faizal, C.K.M. and Samad, A.F.A. and Atnaw, S.M. and Sulaiman, S.A. (2019) Performance modelling and validation on co-gasification of coal and sawdust pellet in research-scale downdraft reactor. In: UNSPECIFIED.

Lakhina, U. and Elamvazuthi, I. and Badruddin, N. and Meriaudeau, F. and Ramasamy, G. and Jangra, A. (2019) Multi-Agent Based Energy Management in Microgrids Using MACSimJX. In: UNSPECIFIED.

Duc Chung, T. and Ibrahim, R.B. (2019) Building Ambient Temperature Measurement using Industrial Wireless Mesh Technology. In: UNSPECIFIED.

Woon, W.C. and Yahya, N. and Badruddin, N. (2019) EEG Eye State Identification based on Statistical Feature and Common Spatial Pattern Filter. In: UNSPECIFIED.

Fudzin, A.F. and Mokhtar, A.A. and Amin, M. and Basri, A.Q. (2019) Analytical hierarchy process application of body in white modular sub-assembly for automotive manufacturing in Malaysia - A case study. In: UNSPECIFIED.

Kuo, J.-T. and Wang, C.-C. and Ng, C.L. and Lin, C.-H. and Wong, P.W. (2019) New alternative realizations of a cross coupled quadruplet bandpass filter. In: UNSPECIFIED.

Albashah, N.L.S.B. and Asirvadam, V.S. and Dass, S.C. and Meriaudeau, F. (2019) Segmentation of blood clot MRI images using intuitionistic fuzzy set theory. In: UNSPECIFIED.

Al-Sabaeei, A. and Napiah, M. and Sutanto, M. and Alaloul, W. (2019) Effects of Waste Denim Fibre (WDF) on the physical and rheological properties of bitumen. In: UNSPECIFIED.

Krishnamurthy, S. and Kannan, R. and Hussin, F.A. and Yahya, E.A. (2019) Enhanced Trench Shielded Power UMOSFET for Single Event Burnout Hardening. In: UNSPECIFIED.

Danish, M. and Ginta, T.L. and Rani, A.M.A. and Carou, D. and Davim, J.P. and Rubaiee, S. and Ghazali, S. (2019) Investigation of surface integrity induced on AZ31C magnesium alloy turned under cryogenic and dry conditions. In: UNSPECIFIED.

Bavoh, C.B. and Lal, B. and Ben-Awuah, J. and Khan, M.S. and Ofori-Sarpong, G. (2019) Kinetics of Mixed Amino Acid and Ionic Liquid on CO2 Hydrate Formation. In: UNSPECIFIED.

Jawed, S. and Amin, H.U. and Malik, A.S. and Faye, I. (2019) EEG visual and non- Visual learner classification using LSTM recurrent neural networks. In: UNSPECIFIED.

Faraz, S. and Ali, S.S.A. and Adil, S.H. (2019) Machine Learning and Stress Assessment: A Review. In: UNSPECIFIED.

Lim, Y.P. and Toh, Y.L. and Cheab, S. and Lucyszyn, S. and Wong, P.W. (2019) Coupling matrix synthesis and design of a chained-function waveguide filter. In: UNSPECIFIED.

Shariff, A.M. and Md Jalil, A.A.-M. and Rostani, K. and Othman, N.A. and Faudzi Mat Isa, M. and Partoon, B. and Lau, K.K. (2019) High CO2-natural gas depressurization via CO2 flow loop facility: Design & engineering implementation. In: UNSPECIFIED.

Hasnen, S.H. and Zabiri, H. and Prakash, K.K. and Mat, T.T. (2019) Adaptive PLS inferential soft sensor for continuous online estimation of NOx emission in industrial water-tube boiler. In: UNSPECIFIED.

Paputungan, I.V. and Setiaji, H. (2019) Engineering kids health monitoring system in Indonesia. In: UNSPECIFIED.

Irawan, A. and Witjaksono, G. and Wibowo, W.K. (2019) Deep Learning for Polar Codes over Flat Fading Channels. In: UNSPECIFIED.

Hasnen, S.H. and Zabiri, H. and Prakash, K.K. and Mat, T.T. (2019) Adaptive PLS inferential soft sensor for continuous online estimation of NOx emission in industrial water-tube boiler. In: UNSPECIFIED.

Isa, F. and Zabiri, H. and Shaarif, M.A. (2019) CO2 removal via promoted potassium carbonate with glycine: Solubility measurement at elevated pressure. In: UNSPECIFIED.

Mansur, F.Z. and Faizal, C.K.M. and Samad, A.F.A. and Atnaw, S.M. and Sulaiman, S.A. (2019) Performance modelling and validation on co-gasification of coal and sawdust pellet in research-scale downdraft reactor. In: UNSPECIFIED.

Norzam, W.A.S. and Hawari, H.F. and Kamarudin, K. (2019) Analysis of Mobile Robot Indoor Mapping using GMapping Based SLAM with Different Parameter. In: UNSPECIFIED.

Lin, C.-H. and Ng, C.L. and Wong, P.W. and Kuo, J.-T. (2019) Power divider and balun filters with a single cross-coupled quadruplet. In: UNSPECIFIED.

Kuo, J.-T. and Wang, C.-C. and Ng, C.L. and Lin, C.-H. and Wong, P.W. (2019) New alternative realizations of a cross coupled quadruplet bandpass filter. In: UNSPECIFIED.

Adil, S.H. and Ebrahim, M. and Ali, S.S.A. and Raza, K. (2019) Identifying Trends in Data Science Articles using Text Mining. In: UNSPECIFIED.

Mathe, R.P. and Ali, S.S.A. and Gilani, S.I.U.H. and Adil, S.H. and Ebrahim, M. (2019) Advanced Bio-Sensing System for Thermal Ambience Comfort. In: UNSPECIFIED.

Choo, H.S. and Ooi, C.Y. and Inoue, M. and Ismail, N. and Moghbel, M. and Baskara Dass, S. and Kok, C.H. and Hussin, F.A. (2019) Machine-Learning-Based Multiple Abstraction-Level Detection of Hardware Trojan Inserted at Register-Transfer Level. In: UNSPECIFIED.

Kok, C.H. and Ooi, C.Y. and Inoue, M. and Moghbel, M. and Baskara Dass, S. and Choo, H.S. and Ismail, N. and Hussin, F.A. (2019) Net Classification Based on Testability and Netlist Structural Features for Hardware Trojan Detection. In: UNSPECIFIED.

Subhani, N. and Kannan, R. and Porkumaran, K. and Prasath, S. and Srinath, M. (2019) An Improved Modified Capacitor-Assisted Z-Source Inverter with Reduced Capacitor Voltage Stress and Inrush Start-up Current. In: UNSPECIFIED.

Irfan, M. and Saad, N. and Ali, A. and Vinoth Kumar, K. and Aman Sheikh, M. and Awais, M. (2019) A Condition Monitoring System for the Analysis of Bearing Distributed Faults. In: UNSPECIFIED.

Alam, M.K. and Aziz, A.A. and Latif, S.A. and Awang, A. (2019) EEG Data Compression using Truncated Singular Value Decomposition for Remote Driver Status Monitoring. In: UNSPECIFIED.

Alam, M.K. and Aziz, A.A. and Latif, S.A. and Awang, A. (2019) Data Clustering Technique for In-Network Data Reduction in Wireless Sensor Network. In: UNSPECIFIED.

Singh, N. and Elamvazuthi, I. and Nallagownden, P. and Ramasamy, G. and Jangra, A. (2019) Communication Latency in Multi-agent System for Microgrid. In: UNSPECIFIED.

Khan, Z. and Yahya, N. and Alsaih, K. and Meriaudeau, F. (2019) Zonal Segmentation of Prostate T2W-MRI using Atrous Convolutional Neural Network. In: UNSPECIFIED.

Anitha, T. and Gopu, G. and Nagarajapandian, M. and Devan, P.A.M. (2019) Hybrid Fuzzy PID Controller for Pressure Process Control Application. In: UNSPECIFIED.

Islam, J. and Vasant, P.M. and Negash, B.M. and Watada, J. (2019) A modified crow search algorithm with niching technique for numerical optimization. In: UNSPECIFIED.

Patel, M.S. and Liew, M.S. and Mustaffa, Z. and Al-Yacouby, A.M. and Abdurrasheed, A.S. and Whyte, A. (2019) Downtime Cost Analysis of Offloading Operations Considering Vessel Motions and Mooring Responses in Malaysian Waters. In: UNSPECIFIED.

Mazelan, F.N. and Kannan, R. and Hasan, K.N.M. and Ali, A. (2019) Multi-Input Power Converter for Renewable Energy Sources using Active Current Sharing Schemes. In: UNSPECIFIED.

Nagarajapandian, M. and Kanthalakshmi, S. and Anitha, T. and Devan, P.A.M. (2019) Linear Matrix Inequality Based Controller used in Multivariable Systems. In: UNSPECIFIED.

Bhaskarwar, T. and Chile, R. and Aole, S. and Elamvazuthi, I. (2019) Remote Monitoring of Coupled Tank Accompanied by PLC-OPC-MATLAB Architecture. In: UNSPECIFIED.

Rosli, N.S. and Ain Burhani, N.R. and Ibrahim, R. (2019) Predictive Maintenance of Air Booster Compressor (ABC) Motor Failure using Artificial Neural Network trained by Particle Swarm Optimization. In: UNSPECIFIED.

Zahoor, F. and Zulkifli, T.Z.A. and Khanday, F.A. and Fida, A.A. (2019) Low-power RRAM Device based 1T1R Array Design with CNTFET as Access Device. In: UNSPECIFIED.

Devan, P.A.M. and Hussin, F.A. and Ibrahim, R. and Bingi, K. and Nagarajapandian, M. (2019) IoT Based Vehicle Emission Monitoring and Alerting System. In: UNSPECIFIED.

Hafeez, Y. and Ali, S.S.A. and Faraz, S. and Moinuddin, M. and Adil, S.H. (2019) Effect of Neurofeedback 2D and 3D Stimulus Content on Stress Mitigation. In: UNSPECIFIED.

Anthony, L.S. and Perumal, V. (2019) Optimization of Metal Oxide Nanostructures via Two-Step Hydrothermal Synthesis. In: UNSPECIFIED.

Ejaz, M.M. and Tang, T.B. and Lu, C.-K. (2019) Autonomous Visual Navigation using Deep Reinforcement Learning: An Overview. In: UNSPECIFIED.

Iampita, I.M. and Hisham, S.B. (2019) Smith Predictor-based Controllers for Temperature Process with Time Delay. In: UNSPECIFIED.

Thangarasu, G. and Dominic, P.D.D. and Subramanian, K. and Bin Othman, M. and Sokkalingam, R. (2019) An Efficient Energy Consumption Technique in Integrated WSN-IoT Environment Operations. In: UNSPECIFIED.

Woon, W.C. and Yahya, N. and Badruddin, N. (2019) EEG Eye State Identification based on Statistical Feature and Common Spatial Pattern Filter. In: UNSPECIFIED.

Atef, M. and Abdullah, M.F. and Khatib, T. and Romlie, M.F. (2019) Utilization of Artificial Neural Networks to Improve the Accuracy of a Hybrid Power System Model. In: UNSPECIFIED.

Alazzawi, A.K. and Rais, H.M. and Basri, S. and Alsariera, Y.A. (2019) PhABC: A Hybrid Artificial Bee Colony Strategy for Pairwise test suite Generation with Constraints Support. In: UNSPECIFIED.

Subramani, I.G. and Bin Ahmad Fauzi, I.A. and Perumal, V. (2019) Expeditious Fabrication Characterization of Metal Interdigitated Transducer on Polyimide film for Biosensing Application. In: UNSPECIFIED.

Lakhina, U. and Elamvazuthi, I. and Badruddin, N. and Meriaudeau, F. and Ramasamy, G. and Jangra, A. (2019) Multi-Agent Based Energy Management in Microgrids Using MACSimJX. In: UNSPECIFIED.

Duc Chung, T. and Ibrahim, R.B. (2019) Building Ambient Temperature Measurement using Industrial Wireless Mesh Technology. In: UNSPECIFIED.

Nurhanim, K. and Elamvazuthi, I. and Izhar, L.I. and Capi, G. (2019) Feature selection of Human Daily Activities using Ensemble method Classification. In: UNSPECIFIED.

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Hassan, S.M. and Elamvazuthi, I. and Devan, A.M. (2019) Design and Analysis of Fractional-order Oscillators Using Scilab. In: UNSPECIFIED.

Sharon, H. and Elamvazuthi, I. and Lu, C.K. and Parasuraman, S. and Natarajan, E. (2019) Classification of Rheumatoid Arthritis using Machine Learning Algorithms. In: UNSPECIFIED.

Xin, S.Q. and Yahya, N. and Izhar, L.I. (2019) Classification of Neurological States from Biosensor Signals Based on Statistical Features. In: UNSPECIFIED.

Yahya Al-Ashmori, Y. and Bin Othman, I. and Bin Mohamad, H. and Rahmawati, Y. and Napiah, M. (2019) Establishing the Level of BIM implementation - A Case Study in Melaka, Malaysia. In: UNSPECIFIED.

Chong, J.S. and Lu, C.-K. and Tang, T.B. (2019) Study of emotional state effect on decision making by using fNIRS. In: UNSPECIFIED.

Yahya Al-Ashmori, Y. and Bin Othman, I. and Bin Mohamad, H. and Rahmawati, Y. and Napiah, M. (2019) Establishing the Level of BIM implementation - A Case Study in Melaka, Malaysia. In: UNSPECIFIED.

Chong, J.S. and Lu, C.-K. and Tang, T.B. (2019) Study of emotional state effect on decision making by using fNIRS. In: UNSPECIFIED.

Syarafuddin Salam, S. and Mizamzul Mehat, N. and Kamaruddin, S. (2019) Optimization of Laminated Composites Characteristics via integration of Chamis Equation, Taguchi method and Principal Component Analysis. In: UNSPECIFIED.

Chitturi, V. and Rao Pedapati, S. and Awang, M. (2019) A Review on Process Parameters and their effects on Dissimilar Friction Stir Welding of Aluminium and Steel Alloys. In: UNSPECIFIED.

Aslam, M.Z. and Jeoti, V. and Karuppanan, S. and Chand, A. (2019) PZT based multilayer surface acoustic wave device for high frequency applications. In: UNSPECIFIED.

Ahmed, A.Y. and Khir, M.H.M. and Dennis, J.O. and Rabih, A.A.S. (2019) Electrothermal Analysis of a MetalMUMPs Device for Acetone Detection. In: UNSPECIFIED.

Krishnamurthy, S. and Kannan, R. and Hussin, F.A. and Yahya, E.A. (2019) Enhanced Trench Shielded Power UMOSFET for Single Event Burnout Hardening. In: UNSPECIFIED.

Tai, M.J.Y. and Vasudevan, M. and Perumal, V. and Liu, W.W. and Mohamed, N.M. (2019) Synthesis of Laser Scribed Graphene Electrode with Optimized Power for Biosensing. In: UNSPECIFIED.

Vasudevan, M. and Murthe, S.S. and Yong, M.T.J. and Perumal, V. and Mohamed, N.M. and Gopinath, S.C.B. (2019) Facile Synthesis of Cellulose Acetate Nanofiber for Biosensing Application. In: UNSPECIFIED.

Thulasiraman, S. and Yunus, N.M.M. and Kumar, P. and Burhanudin, Z.A. and Wilfred, C.D. and Ariffin, A. and Hamdan, M.F. and Hamid, N.H. (2019) Characteristics of Asphaltenes Thin Film Extracted from Crude-Oil-Tank-Bottom-Sludge (COTBS). In: UNSPECIFIED.

Mansura, A. and Drieberg, M. and Aziz, A.A. and Bassoo, V. (2019) Multi-Energy Threshold-based Routing Protocol for Wireless Sensor Networks. In: UNSPECIFIED.

Permanasari, A.A. and Puspitasari, P. and Sukarni, S. and Irdianto, W. and Ginta, T.L. and Gilang, D. (2019) Thermophysical properties and heat transfer performance of TiO2-Distilled water nanofluid using shell and tube heat exchanger. In: UNSPECIFIED.

Mohd Norhakim, N.N.H.B. and Arif Bin Burhanudin, Z. (2019) Correlation of charge neutrality point and ions capture in DNA-graphene field-effect transistor using drift-diffusion model. In: UNSPECIFIED.

Yan, L.Z. and Fahmi Bin Hawari, H. and Witjaksono Bin Djaswadi, G. (2019) Room temperature interdigitated electrode acetone sensor based on SnO2-rGO hybrid composite. In: UNSPECIFIED.

Junaid, M. and Witjaksono, G. (2019) Analysis of band gap in AA and Ab stacked bilayer graphene by Hamiltonian tight binding method. In: UNSPECIFIED.

Al Fitri, M.R. and Oktiawati, U.Y. and Paputungan, I.V. (2019) Mobile based application design of wireless motion detection for home security. In: UNSPECIFIED.

Soaid, N.I. and Mohamed Saheed, M.S. and Mohamed Saheed, M.S. and Mohamed, N.M. (2019) Effect of laser power on the formation of porous graphitic carbon on polyimide film. In: UNSPECIFIED.

Kumar, P. and Norkakim, N.N. and Mohamed Saheed, M.S. and Burhanudin, Z.A. (2019) Optimization of CO2 laser power for patterning of single-layer graphene for advanced devices applications. In: UNSPECIFIED.

Raza, A. and Capretz, L.F. and Basri, S.B. (2019) An Empirical Study of User Support Tools in Open Source Software. In: UNSPECIFIED.

Suresh, K. and Jeoti, V. and Drieberg, M. and Iqbal, A. (2019) On Self Driving Cars: An LED Time of Flight (ToF) based Detection and Ranging using various Unipolar Optical CDMA Codes. In: UNSPECIFIED.

Mahzabin, M.S. and Jee Hock, L. and Siong Kang, L. and Nikbakht Jarghouyeh, E. (2019) Behaviour of kenaf fibre reinforced composite. In: UNSPECIFIED.

Alsubal, S. and Sapari, N.B. and Harahap, I.S.H. and Ali Mohammed Al-Bared, M. (2019) A review on mechanism of rainwater in triggering landslide. In: UNSPECIFIED.

Naser Reda, M. and Spinnler, M. and Al-Kayiem, H. and Sattelmayer, T. (2019) Experimental investigation of temperature and condensation control of photovoltaic panels. In: UNSPECIFIED.

Hamamoto, M. and Rahim Md Arshad, A. and Prasad Ghosh, D. (2019) Full waveform inversion based on genetic local search algorithm with hybrid-grid scheme. In: UNSPECIFIED.

Baig, I. and Farooq, U. and Hasan, N.U. and Zghaibeh, M. and Jeoti, V. and Imran, M. (2019) A Low PAPR Universal Filtered Multi-Carrier System for 5G Machine Type Communications. In: UNSPECIFIED.

Irawan, A. and Witjaksono, G. and Wibowo, W.K. (2019) Deep Learning for Polar Codes over Flat Fading Channels. In: UNSPECIFIED.

Paputungan, I.V. and Setiaji, H. (2019) Engineering kids health monitoring system in Indonesia. In: UNSPECIFIED.

Ko, C.-E. and Chen, P.-H. and Liao, W.-M. and Lu, C.-K. and Lin, C.-H. and Liang, J.-W. (2019) Using A Cropping Technique or Not: Impacts on SVM-based AMD Detection on OCT Images. In: UNSPECIFIED.

Egambaram, A. and Badruddin, N. and Asirvadam, V.S. and Fauvet, E. and Stolz, C. and Begum, T. (2019) Unsupervised Eye Blink Artifact Identification in Electroencephalogram. In: UNSPECIFIED.

Lim, Y.P. and Toh, Y.L. and Cheab, S. and Ng, G.S. and Wong, P.W. (2019) Chained-Function Waveguide Filter for 5G and beyond. In: UNSPECIFIED.

Amirudin, N.A.B. and Saad, N. and Ali, S.S.A. and Adil, S.H. (2019) Detection and Analysis of Driver Drowsiness. In: UNSPECIFIED.

Faraz, S. and Ali, S.S.A. and Adil, S.H. (2019) Machine Learning and Stress Assessment: A Review. In: UNSPECIFIED.

Jakeri, M.M. and Hassan, M.F. (2019) A review of factors influencing the implementation of secure framework for in-house web application development in Malaysian public sector. In: UNSPECIFIED.

Jung, L.T. and Haruna, A.A. (2019) Green data center by incentive-based job scheduling approach. In: UNSPECIFIED.

Ahmad, J. and Mahamad, S. and Mohd Fadzil, N.S. (2019) Integrated mosquitoes repellent with ultrasound and frequency. In: UNSPECIFIED.

Bt Nasaruddin, N.S. and Aziz, I.A. and Rashid, N.A. (2019) Web-based electronic healthcare record system (EHRS) based on feedback. In: UNSPECIFIED.

Jatoi, M.A. and Kamel, N. and Gaho, A.A. and Dharejo, F.A. (2019) Bayesian Framework based Brain Source Localization Using High SNR EEG Data. In: UNSPECIFIED.

Memon, M. and Bajwa, U.A. and Ikhlas, A. and Memon, Y. and Memon, S. and Malani, M. (2019) Blockchain beyond Bitcoin: Block Maturity Level Consensus Protocol. In: UNSPECIFIED.

Shahzadi, I. and Meriadeau, F. and Tang, T.B. and Quyyum, A. (2019) CNN-LSTM: Cascaded framework for brain tumour classification. In: UNSPECIFIED.

Mazher, M. and Faye, I. and Qayyum, A. and Malik, A.S. (2019) Classification of resting and cognitive states using EEG-based feature extraction and connectivity approach. In: UNSPECIFIED.

Qayyum, A. and Meriaudeau, F. and Chan, G.C.Y. (2019) Classification of atrial fibrillation with pretrained convolutional neural network models. In: UNSPECIFIED.

Babiker, A. and Faye, I. and Malik, A.S. and Sato, H. (2019) Studying the effect of lecture content on students� EEG data in classroom using SVD. In: UNSPECIFIED.

Roslan, N.S. and Izhar, L.I. and Feng, Y.X. and Faye, I. and Ho, E.T.W. and Rahman, M.A. (2019) An investigation of physiological correlates of neuroticism during speaking task: A preliminary study. In: UNSPECIFIED.

Jawed, S. and Amin, H.U. and Malik, A.S. and Faye, I. (2019) EEG visual and non- Visual learner classification using LSTM recurrent neural networks. In: UNSPECIFIED.

Albashah, N.L.S.B. and Asirvadam, V.S. and Dass, S.C. and Meriaudeau, F. (2019) Segmentation of blood clot MRI images using intuitionistic fuzzy set theory. In: UNSPECIFIED.

Qayyum, A. and Faye, I. and Malik, A.S. and Mazher, M. (2019) Assessment of cognitive load using multimedia learning and resting states with deep learning perspective. In: UNSPECIFIED.

Kamble, R.M. and Kokare, M. and Chan, G.C.Y. and Perdomo, O. and González, F.A. and Müller, H. and Mériaudeau, F. (2019) Automated Diabetic Macular Edema (DME) analysis using fine tuning with inception-resnet-v2 on oct images. In: UNSPECIFIED.

Sathasivam, L. and Elamvazuthi, I. and Khan, M.K.A.A. and Parasuraman, S. (2019) Tuning A Three-Phase Separator Level Controller via Particle Swarm OptimizationAlgorithm. In: UNSPECIFIED.

Ying, G.L. and Elamvazuthi, I. and Khan, M.K.A.A. and Parasuraman, S. (2019) Development of EMG based Upper Arm Exoskeleton. In: UNSPECIFIED.

Latif, W.M.S.M. and Sharbini, S.N. and Wan Sulaiman, W.R. and Idris, A.K. (2019) Utilization of silicon dioxide nanoparticles in foam enhanced oil recovery - A comprehensive review. In: UNSPECIFIED.

Basri, A.Q. and Mohamed, N.M.Z.N. and Yasir, K.A.S.H.M. and Fazi, H.M. and Fudzin, A.F. (2019) The validation of productivity on the changeover activity at the automotive stamping press line by comparing the embedded SMED frame-work versus SMED approach: A witness simulation case study. In: UNSPECIFIED.

Fudzin, A.F. and Mokhtar, A.A. and Amin, M. and Basri, A.Q. (2019) Analytical hierarchy process application of body in white modular sub-assembly for automotive manufacturing in Malaysia - A case study. In: UNSPECIFIED.

Mawardzi, M.F.R.M. and Japper-Jaafar, A. and Najib, M.S. and Daud, S.M. and Ya, T.M.Y.S.T. (2019) Classification of waxy crude oil odor-profile using gas sensor array. In: UNSPECIFIED.

Mawardzi, M.F.R.M. and Japper-Jaafar, A. and Najib, M.S. and Daud, S.M. and Ya, T.M.Y.S.T. (2019) Intelligent classification of waxy crude oil odor-profile at different temperature. In: UNSPECIFIED.

Lim, Y.P. and Toh, Y.L. and Cheab, S. and Lucyszyn, S. and Wong, P.W. (2019) Coupling matrix synthesis and design of a chained-function waveguide filter. In: UNSPECIFIED.

Sheikh, M.A. and Saad, N.R. and Mohd Nor, N.B. and Tahir Rakhsh, S. and Irfan, M. (2019) An Unsupervised Automated Method to Diagnose Industrial Motors Faults. In: UNSPECIFIED.

Lee, S.C. and Tee, B.P. and Chong, M.F. and Ku Mahamud, K.M.S. and Mohamad, H. (2019) Structural assessment for an old steel railway bridge under static and dynamic loads using fibre optic sensors. In: UNSPECIFIED.

Danish, M. and Ginta, T.L. and Rani, A.M.A. and Carou, D. and Davim, J.P. and Rubaiee, S. and Ghazali, S. (2019) Investigation of surface integrity induced on AZ31C magnesium alloy turned under cryogenic and dry conditions. In: UNSPECIFIED.

Challa, P. and Sahith, S.J.K. and Rao, K.V. and Pedapati, S.R. (2019) Hydraulic modeling for upstream gas production planning and allocation - Significance, challenges, and recommendations. In: UNSPECIFIED.

Ahmed, M.O. and Yenduri, A. and John, K.V. (2019) Evaluation of the dynamic responses of truss spar platforms for different mooring materials in intact and damaged line conditions. In: UNSPECIFIED.

Kok, T.L. and Aldrich, C. (2019) Analysis of Electrochemical Noise for Corrosion Type Identification by Use of Global Recurrence Plots and Texture Analysis. In: UNSPECIFIED.

Tayeh, B.A. and Alaloul, W.S. and Alnairab, A.F. (2019) Challenges facing municipalities to provide wastewater services: A case study of Gaza strip. In: UNSPECIFIED.

Tayeh, B.A. and Alaloul, W.S. and Al-Ghazalli, N.K. (2019) Tender pricing of infrastructure projects: Affecting factors. In: UNSPECIFIED.

Shariff, A.M. and Md Jalil, A.A.-M. and Rostani, K. and Othman, N.A. and Faudzi Mat Isa, M. and Partoon, B. and Lau, K.K. (2019) High CO2-natural gas depressurization via CO2 flow loop facility: Design & engineering implementation. In: UNSPECIFIED.

Liew, C.F. and Prakash, J. and Kamaruddin, S. and Ong, K.S. (2019) Deployment of an FMEA-Integrated Framework to Improve Operational Performance in Semiconductor Manufacturing: A Case Study. In: UNSPECIFIED.

Latif, N.A.A. and Abidin, I.M.Z. and Azaman, N. and Jamaludin, N. and Mokhtar, A.A. (2019) A Feature Extraction Technique Based on Factor Analysis for Pulsed Eddy Current Defects Categorization. In: UNSPECIFIED.

Kuo, W.-L. and Lee, H.-X. and Hsieh, S.-H. (2019) Designing a Database Schema for Supporting Visual Management of Variable Parameters in BIM Models. In: UNSPECIFIED.

Meyghani, B. and Awang, M.B. and Poshteh, R.G.M. and Momeni, M. and Kakooei, S. and Hamdi, Z. (2019) The Effect of Friction Coefficient in Thermal Analysis of Friction Stir Welding (FSW). In: UNSPECIFIED.

Ofei, T.N. and Jalaludin, A.N. and Habte, A.D. and Lemma, T.A. and Ben-Awuah, J. (2019) Investigation of Plastering Effect in Casing-while-Drilling - A CFD Study. In: UNSPECIFIED.

Al-Mossawy, M.I. (2019) A simple approach to identify the proper relative permeability model. In: UNSPECIFIED.

Bavoh, C.B. and Lal, B. and Ben-Awuah, J. and Khan, M.S. and Ofori-Sarpong, G. (2019) Kinetics of Mixed Amino Acid and Ionic Liquid on CO2 Hydrate Formation. In: UNSPECIFIED.

Ghazali, M.F. and Mohamad, H. (2019) Monitoring subsurface ground movement using fibre optic inclinometer sensor. In: UNSPECIFIED.

Mizwar, I.K. and Napiah, M. and Sutanto, M.H. (2019) Thermal properties of cool asphalt concrete containing phase change material. In: UNSPECIFIED.

Meyghani, B. and Awang, M.B. and Momeni, M. and Rynkovskaya, M. (2019) Development of a Finite Element Model for Thermal Analysis of Friction Stir Welding (FSW). In: UNSPECIFIED.

Tiong, M. and Gholami, R. and Rahman, M.E. and Irawan, S. (2019) An approach to enhance the durability and mechanical properties of Class G cement using nano materials. In: UNSPECIFIED.

Al-Sabaeei, A. and Napiah, M. and Sutanto, M. and Alaloul, W. (2019) Effects of Waste Denim Fibre (WDF) on the physical and rheological properties of bitumen. In: UNSPECIFIED.

Hamdi, Z. and Momeni, M.S. and Meyghani, B. and Zivar, D. and Chung, B.Y. and Bataee, M. and Asadian, M.A. (2019) Oil well compressive strength analysis from sonic log; A case study. In: UNSPECIFIED.

Ismail, A. and Awang, M. and Rahman, F.A. and Megat Khalid, P.Z. and Baharudin, B.A. and Rojan, M.A. and Hamid, D.A. (2019) The Effects of Welding Parameters on Macro and Micro-Structure of Friction Stir Welded Aluminium. In: UNSPECIFIED.

Ani, M.N.C. and Kamaruddin, S. and Azid, I.A. (2019) Streamlining the flow of production system through elimination the waste of the overburden (muri) for manual handling process. In: UNSPECIFIED.

Kim, Y. and Yeom, S. and Yoon, S. and Kim, J.-K. and Kwon, S. and Hwang, S. and Shariff, A.B. (2019) Development and demonstration of novel cryogenic distillation process for offshore gas platform. In: UNSPECIFIED.

Reddy Prasad, D.M. and Pendyala, R. and Senthilkumar, R. and Azri, M.H.B. (2019) Microbial production of poly (3-hydroxybutyrate) (PHB) from rubber seed oil using Cupriavidus necator H16. In: UNSPECIFIED.

Hasnen, S.H. and Zabiri, H. and Prakash, K.K. and Mat, T.T. (2019) Adaptive PLS inferential soft sensor for continuous online estimation of NOx emission in industrial water-tube boiler. In: UNSPECIFIED.

Isa, F. and Zabiri, H. and Shaarif, M.A. (2019) CO2 removal via promoted potassium carbonate with glycine: Solubility measurement at elevated pressure. In: UNSPECIFIED.

Mansur, F.Z. and Faizal, C.K.M. and Samad, A.F.A. and Atnaw, S.M. and Sulaiman, S.A. (2019) Performance modelling and validation on co-gasification of coal and sawdust pellet in research-scale downdraft reactor. In: UNSPECIFIED.

Nasir, N.A.A.M. and Ishak, A. and Pop, I. and Zainuddin, N. (2019) MHD stagnation point flow over a permeable stretching/shrinking sheet with a heat sink and radiation effects. In: UNSPECIFIED.

Isa, N.F.M. and Shafie, A. and Zainuddin, N. (2019) An empirical model and sensitivity analysis for silica oxide in enhanced oil recovery. In: UNSPECIFIED.

Javaid, A. and Muthuvalu, M.S. and Sulaiman, J. and Ismail, M.T. and Ali, M.K.M. (2019) Forecast the moisture ratio removal during seaweed drying process using solar drier. In: UNSPECIFIED.

Hamid, M.S.A. and Shafiq, N. and Musir, A.A. and Rosseli, S.R. (2019) Classification of reinforced concrete single story and double story house using eco-efficiency index approach. In: UNSPECIFIED.

Hamid, M.S.A. and Jasni, O.O. and Shafiq, N. (2019) Eco-efficiency index analysis of single story structure of reinforced concrete house using economical and environmental score approach. In: UNSPECIFIED.

Masri, H.L. and Kalid, K.S. (2019) GrouPro: Developing a group-formation system to support collaborative learning in group projects. In: UNSPECIFIED.

Hassan, N.H. and Arshad, N.I. (2019) Proposing construct for organizational agility model in Malaysian automotive organization. In: UNSPECIFIED.

Masroor, K. and Jeoti, V. and Drieberg, M. (2019) Analyzing the effects of LED lamp arrangements on performance of an indoor visible light communication system. In: UNSPECIFIED.

Al-Shatari, M. and Hussin, F.A. and Aziz, A.A. and Witjaksono, G. and Rohmad, M.S. and Tran, X.-T. (2019) An Efficient Implementation of LED Block Cipher on FPGA. In: UNSPECIFIED.

Lin, C.-H. and Ng, C.L. and Wong, P.W. and Kuo, J.-T. (2019) Power divider and balun filters with a single cross-coupled quadruplet. In: UNSPECIFIED.

Jian, Z. and Sakai, H. and Watada, J. and Roy, A. and Hassan, M.H.B. (2019) An Apriori-based Data Analysis on Suspicious Network Event Recognition. In: UNSPECIFIED.

Kuo, J.-T. and Wang, C.-C. and Ng, C.L. and Lin, C.-H. and Wong, P.W. (2019) New alternative realizations of a cross coupled quadruplet bandpass filter. In: UNSPECIFIED.

Adil, S.H. and Ebrahim, M. and Ali, S.S.A. and Raza, K. (2019) Identifying Trends in Data Science Articles using Text Mining. In: UNSPECIFIED.

Mathe, R.P. and Ali, S.S.A. and Gilani, S.I.U.H. and Adil, S.H. and Ebrahim, M. (2019) Advanced Bio-Sensing System for Thermal Ambience Comfort. In: UNSPECIFIED.

Md Jalil, A.A.M. and Faudzi Mat Isa, M. and Rostani, K. and Othman, N.A. and Shariff, A.M. and Lau, K.K. and Partoon, B. and Tay, W.H. (2019) Design and engineering implementation of blowdown system for cryogenic CO2- NG pilot facility. In: UNSPECIFIED.

Shahhiran, A.F. and Ramli, R.M. and Zawawi, A. and Zaid, H.F.M. and Harun, N.Y. (2019) Modification of TiO2/AC catalyst for visible light degradation of ionic liquid contaminated wastewater: Effect of Cu loading on the characterization and efficiency. In: UNSPECIFIED.

Sultan, T. and Zabiri, H. and Ali Ammar Taqvi, S. and Shahbaz, M. (2019) Plant-wide MPC control scheme for CO2absorption/stripping system. In: UNSPECIFIED.

Lee, S.C. and Tee, B.P. and Chong, M.F. and Ku Mahamud, K.M.S. and Mohamad, H. (2019) Structural assessment for an old steel railway bridge under static and dynamic loads using fibre optic sensors. In: UNSPECIFIED.

Hamidi, R. (2019) Deep learning application in time-frequency analysis for noise attenuation. In: UNSPECIFIED.

Husna, O.N. and Ismail, M.C. and Mustapha, M. (2019) Mechanical and anticorrosive properties of epoxy containing modified graphene Oxide hybrids. In: UNSPECIFIED.

Nur Liyana Zakaria, W.W. and Kee, K.E. and Ismail, M.C. (2019) The effect of sensitization treatment on chloride induced stress corrosion cracking of 304L stainless steel using U-bend test. In: UNSPECIFIED.

Patil, N.A. and Safwan, A. and Pedapati, S.R. (2019) Effect of deposition methods on microstructure and mechanical properties of Al 7075 alloy-rice husk ash surface composites using friction stir processing. In: UNSPECIFIED.

Majid, M.F.B. and Binti, M.Z.H.F. and Kait, C.F. and Ghani, N.B.A. and Saidon, N.B. (2019) Physical properties of dihydric Alcohol-based deep eutectic solvent for integrated fuel oil desulfurization. In: UNSPECIFIED.

Bin Ayob, F. and Bin Hussain, P. and Abdullah, A.B. and Bin Abdul Rahim, A.A. and Bin Baharudin, B.A. (2019) Unconventional approach in the study of diffusion welding of marine grades grey cast iron to low carbon steel. In: UNSPECIFIED.

Arumugam, T. and Karuppanan, S. and Ovinis, M. (2019) Residual strength analysis of pipeline with circumferential groove corrosion subjected to internal pressure. In: UNSPECIFIED.

Bashir, Y. and Babasafari, A.A. and Biswas, A. and Hamidi, R. and Alashloo, S.Y.M. and Janjuah, H.T. and Ghosh, D.P. and Sum, C.W. (2019) Cohesive approach for high-resolution seismic using inversion & Imaging in Malaysian carbonate field. In: UNSPECIFIED.

Ayoub, M.A. and Almansour, A.O. and Hassan, A.M. (2019) A novel formula for estimating oil compressibility below bubble point pressure using group method of data handling: A comparative approach. In: UNSPECIFIED.

Lee, W.Y. and Hamidi, R. and Ghosh, D. and Musa, M.H. (2019) Signal to noise ratio enhancement using empirical wavelet transform. In: UNSPECIFIED.

Prajapati, S. and Ghosh, D. (2019) Enhancing velocity model for gas cloud using first break travel time tomography full waveform inversion. In: UNSPECIFIED.

Hassan, A.M. and Ayoub, M. and Eissa, M. and Bruining, H. and Al-Mansour, A. and Al-Guraishi, A. (2019) A novel hybrid enhanced oil recovery method by smart water-injection and foam-flooding in carbonate reservoirs. In: UNSPECIFIED.

Hamidi, R. and Ghosh, D. (2019) Seismic attribute feasibility study for fault and fracture analysis and integration with spectral decomposition: Application in Sarawak basin. In: UNSPECIFIED.

Masyhur, E.M.H. and Rafek, A.G.M. and Noh, K.A.M. (2019) Utilization of air wave to determine the quality of seismic refraction data in near surface geophysical survey. In: UNSPECIFIED.

Janssen, M. and Mutawa, A. and Pilus, R. and Zitha, P. (2019) Evaluation of foam-assisted surfactant flooding at reservoir conditions. In: UNSPECIFIED.

Ul Hassan Shah, M. and Moniruzzaman, M. and Mahabubur Rahman Talukder, M. and Bt Yusup, S. (2019) Antimicrobial Activity and Acute Toxicity of Choline Based Ionic Liquid Mixtures. In: UNSPECIFIED.

Nasha Musa, N. and Zulaikha Yusof, N. (2019) Chemical and Physical Parameters Affecting Bacterial Pigment Production. In: UNSPECIFIED.

Suhaimi, N.H. and Yeong, Y.F. and Jusoh, N. and Asri, M.F.M. (2019) Amine-Functionalized Metal Organic Framework (MOF)/6FDA-Durene Composite Membranes for CO2 Removal from CH4. In: UNSPECIFIED.

Aimen Isa, M. and Leng Chew, T. and Fong Yeong, Y. (2019) Studies on Different Support Seeding Conditions Applied in the Formation of NaY Zeolite Membrane. In: UNSPECIFIED.

Idress, M. and Luqman Hasan, M. and Devi Vijaya Kumar, S. (2019) Performance Evaluation of Commercial Lost Circulation Materials. In: UNSPECIFIED.

Yub Harun, N. and Jin Han, T. and Vijayakumar, T. and Saeed, A. and Afzal, M.T. (2019) Ash Deposition Characteristics of Industrial Biomass Waste and Agricultural Residues. In: UNSPECIFIED.

Salwa Mohd Nazir, L. and Fong Yeong, Y. and Leng Chew, T. (2019) Effect of Alkalinity Towards the Formation of NaX Zeolite Membranes. In: UNSPECIFIED.

Kassim, Z. and Saad Khan, M. and Lal, B. (2019) Thermodynamic modelling on methane hydrate equilibrium condition in the presence of electrolyte inhibitor. In: UNSPECIFIED.

Banerjee, A. and Ghosh, D.P. and Salim, A.M.A. and Zakaria, A.A. (2019) Sub-surface investigation in the frontier region of deep-water NW Sabah, Malaysia. In: UNSPECIFIED.

Abdul Latiff, A.H. and Mohd Zaki, Z. and Wan Yusoff, W.I. (2019) Survey design in anisotropy media from focal beam analysis. In: UNSPECIFIED.

Hashim, H. and Arshad, A.R. and Abdul Latiff, A.H. (2019) Sparse CL-SRME using impulse response and source wavelet: Method and applications. In: UNSPECIFIED.

Luluan, L. and Hermana, M. and Ghosh, D. and Weng Sum, C. (2019) Uncertainty analysis in elastic and electrical properties of hydrocarbon reservoir: Pitfalls and propose solutions. In: UNSPECIFIED.

Shamsuddin, A.A.S. and Shahar, S. and Ghosh, D.P. (2019) Detecting sills as kinematic indicators based on spectral decomposition - Inferring stress regime in the Malay Basin (Fractured basement reservoir). In: UNSPECIFIED.

Purnomo, E.W. and Biswas, A. and Ghosh, D.P. and Sum, C.W. (2019) Under gas clouds effects shallow marine gas reservoir delineation. In: UNSPECIFIED.

Gouda, M. and Salim, A.M.A. and Hamada, G. (2019) Estimation of anisotropy-free acoustic impedance from partial-stack seismic inversion: A case study from Inas Field, Malay Basin. In: UNSPECIFIED.

Ahmed, S. and Elraies, K.A. and Hanamertani, A.S. and Hashmet, M.R. and Shafian, S.R.M. and Hsia, I.C.C. (2019) Investigation of carbon dioxide foam performance utilizing different additives for fracturing unconventional shales. In: UNSPECIFIED.

Kassim, Z. and Rahman, F.H. and Lal, B. (2019) Dual function hydrate inhibitor for prevention of hydrate in methane and carbon dioxide system. In: UNSPECIFIED.

Shah, S. and As Syukri, H. and Wolf, K.-H. and Pilus, R.M. and Rossen, W.R. (2019) Foam generation in flow across a sharp permeability transition: Effect of velocity and fractional flow. In: UNSPECIFIED.

Bashir, Y. and Latif, A.H.A. and Rezaei, S. and Mahgoub, M. and Alashloo, S.Y.M. and Hermana, M. and Ghosh, D.P. and Sum, C.W. (2019) Seismic diffraction imaging in laterally varying velocity media for frequency bandwidth expansion - Application in carbonate field Sarawak, Malaysia. In: UNSPECIFIED.

Prajapati, S. and Ghosh, D. (2019) An equivalent media theory for reservoir characterization. In: UNSPECIFIED.

Rao, T.V.V.L. and Abdul Rani, A.M. and Manivasagam, G. (2019) Squeeze film analysis of three-layered parallel plate and partial journal bearing lubricated with couple stress fluids for skeletal joint applications. In: UNSPECIFIED.

Jalil, A.A.M. and Faudzi Mat Isa, M. and Rostani, K. and Othman, N.A. and Shariff, A.M. and Lau, K.K. and Partoon, B. and Tay, W.H. (2019) Design and engineering implementation of blowdown system for cryogenic CO2- NG pilot facility. In: UNSPECIFIED.

Ahmed, M.O. and Yenduri, A. and John, K.V. (2019) Evaluation of the dynamic responses of truss spar platforms for different mooring materials in intact and damaged line conditions. In: UNSPECIFIED.

Md Jalil, Abdullah Al and Mat Isa, M Faudzi and Rostani, Khairul and Othman, Nurzatil Aqmar and M Shariff, Azmi and Lau, Kok Keong and Partoon, Behzad and Tay, Wee Horng (2019) Design and engineering implementation of blowdown system for cryogenic CO2-NG pilot facility. In: SPE Annual Technical Conference and Exhibition.

Shariff, AM and Md Jalil, AA-M and Rostani, K and Othman, NA and Faudzi Mat Isa, M and Partoon, B and Lau, KK (2019) High CO2-natural gas depressurization via CO2 flow loop facility: Design & engineering implementation. In: Process Safety Spotlights 2019, Held at the 2019 AIChE Spring Meeting and 15th Global Congress on Process Safety.

Bavoh, Cornelius B and Lal, Bhajan and Ben-Awuah, Joel and Khan, Muhammad Saad and Ofori-Sarpong, Grace (2019) Kinetics of mixed amino acid and ionic liquid on CO2 hydrate formation. In: IOP Conference Series: Materials Science and Engineering.

Bavoh, Cornelius B and Lal, Bhajan and Ben-Awuah, Joel and Khan, Muhammad Saad and Ofori-Sarpong, Grace (2019) Kinetics of mixed amino acid and ionic liquid on CO2 hydrate formation. In: IOP Conference Series: Materials Science and Engineering.

Vijaya, Bhaskar Reddy A and Moniruzzaman, Muhammad and Baran, Saha Bidyut and Bakthavatchala, Reddy N and Zyryanov, Grigory V (2019) Synthesis, Characterization and CO2 Sorption Capacity Measurements of Selected Ionic Liquid Polymers/A. Vijaya Bhaskar Reddy, Muhammad Moniruzzaman, Bidyut Baran Saha, N. Bakthavatchala Reddy, GV Zyryanov. In: Modern Synthetic Methodologies for Creating Drugs and Functional Materials (MOSM2019).

Ejaz, Muhammad Mudassir and Tang, Tong Boon and Lu, Cheng-Kai (2019) Autonomous visual navigation using deep reinforcement learning: An Overview. In: 2019 IEEE Student Conference on Research and Development (SCOReD).

Chong, Jie Sheng and Lu, Cheng-Kai and Tang, Tong Boon (2019) Study of emotional state effect on decision making by using fNIRS. In: 2019 IEEE International Circuits and Systems Symposium (ICSyS).