Browse by Type

Group by: Creators | Item Type | No Grouping

Jump to: A | B | C | D | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | Y | Z

Number of items: 338.

A

Alameen, M. Basheer and Elraies, Khaled A. and Almansour, Abdullah and Mohyaldinn, Mysara and Agwu, Okorie E. (2025) An experimental study to control sand production in weakly consolidated sandstone formations: A chemical approach on formation strength. Results in Engineering, 27. ISSN 25901230

Ahmed, Tauseef and Jose, Rajan and Alam, Md. Mehebub and Crispin, Reverant and Nuge, Tamrin and Raj, Vipin and Saheed, Mohamed Shuaib Mohamed (2025) Stretchable surfaces and electrodes for triboelectric nanogenerators: Challenges and opportunities. Nano Energy, 142. ISSN 22112855

Ahmed, Tauseef and Nuge, Tamrin and Khan, Muhammad Irfan and Khan, Lubna and Redzuan, Aein Afina and Sallih, Nabihah and Saheed, Mohamed Shuaib Mohamed (2025) Investigation of Morphology, Crystallization and Conductivity of Polyaniline based Electrospun Fibers. Journal of Advanced Research in Micro and Nano Engineering, 34 (1). 93 – 101. ISSN 27568210

Aromoye, Ibrahim Akinjobi and Hiung, Lo Hai and Sebastian, Patrick (2025) P-DETR: A transformer-based algorithm for pipeline structure detection. Results in Engineering, 26. ISSN 25901230

Aliyu, Aminu Jibrin and Kannan, Ramani and Wei, Ho Tatt (2025) Impact of grid strength on grid-forming inverter performance: a comparative study of droop and virtual synchronous generator controls. Engineering Research Express, 7 (2). ISSN 26318695

Aliyu, Aminu Jibrin and Kannan, Ramani (2025) Comprehensive review of fault ride-through techniques for grid-forming inverters: current approaches, challenges, and future directions. Engineering Research Express, 7 (2). ISSN 26318695

Ali, Aijaz and Bingi, Kishore and Ibrahim, Rosdiazli and Bansal, Lalit and Omar, Madiah (2025) Zynq-7000 FPGA-in-the-loop implementation of fractional-order PID controllers using a hybrid fixed-point and floating-point approach. Engineering Research Express, 7 (2). ISSN 26318695

Aminuddin, Muhammad Syahir and Bustam, Mohamad Azmi and Chuah, Chong Yang and Johari, Khairiraihanna (2025) Metal Chloride-Functionalized Ionic Liquids for Highly Efficient H2S Conversion into Value-Added Elemental Sulfur: A Comprehensive Optimization Study and Techno-Economic Analysis. Industrial and Engineering Chemistry Research, 64 (26). 13489 – 13511. ISSN 08885885

Alshalif, Abdullah Faisal and Irwan, J.M. and Mansour, Mohammed A. and Imran, Arif and Yehya Alshaeer, Honin Ali and Mutafi, A. and Hakim, S.J.S. and Alraeeini, Ahmed Saleh (2025) Sustainable bio-foamed concrete bricks: optimising compressive strength with rice husk ash, coal bottom ash, and Bacillus tequilensis. European Journal of Environmental and Civil Engineering. ISSN 19648189

Alzubi, Khalid Mhmoud and Alaloul, Wesam Salah and Al Salaheen, Marsail and Musarat, Muhammad Ali and Baarimah, Abdullah O. and Mushtaha, Ahmed Wajeh (2025) Indoor construction productivity assessment using computer vision and mask region-based convolutional neural networks. Construction Innovation. ISSN 14714175

Abdullah, Rohaimi and Ibrahim, Adnan and Ishak, Muhammad Amir Aziat Bin and Sopian, Kamaruzzaman and Jarimi, Hasila and Razali, Halim and Abusaibaa, Ghaith (2025) Performance Evaluation of a Solar Assisted Dual Condenser Heat Pump System for Drying of Pandan Leaves (Pandanus Amaryllifolius). Jurnal Kejuruteraan, 37 (1). 349 – 368. ISSN 01280198

Achmad, Fandi and Zulkarnain, Ibnu and Rumanti, Augustina Asih and Wiratmadja, Iwan Inrawan and Shuhidan, Shuhaida Mohamed (2025) Enhancing Performance of Batik SMEs through Cleaner Production Adoption: Insights from Clustering Algorithm Analysis. Lecture Notes in Mechanical Engineering. 151 – 163. ISSN 21954356

Abdullahi, Shamsu and Usman Danyaro, Kamaluddeen and Zakari, Abubakar and Abdul Aziz, Izzatdin and Amila Wan Abdullah Zawawi, Noor and Adamu, Shamsuddeen (2025) Time-Series Large Language Models: A Systematic Review of State-of-the-Art. IEEE Access, 13. 30235 – 30261. ISSN 21693536

Anuar, Muhammad Amirul and Ammar, Syed Mohammad and Endut, Rosdisham Bin and Junid, Syed Alwee Aljunid Syed and Ali, Norshamsuri and Saad, Mohamad Naufal and Al-Khafaji, Hamza Mohammed Ridha (2025) Performance Analysis of the New Flexible Double Weight (FDW) Code With Various Detection Techniques. IEEE Access, 13. 64841 – 64852. ISSN 21693536

Afolabi, Funsho and Dzulkarnain, Iskandar and Kwon, Sunil and Martyushev, Dmitriy A. and Lee, Jang H. and Jufar, Shiferaw R. and Al-Akbari, Fahd (2025) Gels for CO2 geo-storage and conformance control: A systemic review of behavior and performance. Deep Underground Science and Engineering. ISSN 20970668

Adamu, Shamsuddeen and Alhussian, Hitham and Aziz, Norshakirah and Abdulkadir, Said Jadid and Alwadin, Ayed and Abdullahi, Mujaheed and Garba, Aliyu (2025) Unleashing the power of Manta Rays Foraging Optimizer: A novel approach for hyper-parameter optimization in skin cancer classification. Biomedical Signal Processing and Control, 99. ISSN 17468094

Amin, Hafeez Ullah and Ahmed, Amr and Yusoff, Mohd Zuki and Mohamad Saad, Mohamad Naufal and Malik, Aamir Saeed (2025) A neurophysiological model based on resting state EEG functional connectivity features for assessing semantic long-term memory performance. Biomedical Signal Processing and Control, 99. ISSN 17468094

Al-Mattarneh, Hashem and Ismail, Rabah and Trrad, Issam and Nimer, Hamsa and Khodier, Mohanad and Jaradat, Yaser and Malkawi, Ahmad B. and Mohammed, Bashar S. (2025) Using artificial neural networks and electromagnetic capacitive NDT sensors for wood engineering application. HBRC Journal, 21 (1). 211 – 233. ISSN 16874048

Amadi, Azubuike H. and Ajienka, Joseph A. and Akaranta, Onyewuchi and Moses, Pwafureino Reuel and Achara, Nnaemeka U. and Ola, Victor Damilare and Udo, Robinson David (2025) A review of soil resistivity testing for enhanced corrosion Control: Overcoming limitations through integrated geophysical approaches and alternative methodologies. Measurement: Journal of the International Measurement Confederation, 242. ISSN 02632241

Ashrafi, Syed Muhammad Yasir and Alaloul, Wesam Salah and Farooqui, Rizwan-Ul-Haq and Saqib, Muhammad and Ahmed, Rana Rabnawaz and Khan, Abdul Mateen (2025) Evaluation and classification of risk from multi-party stakeholders of the construction industry. Journal of Asian Architecture and Building Engineering. ISSN 13467581

Al-Bahtiti, Afnan S. and Tayeh, Bassam A. and Baghdadi, Ahmad and Alaloul, Wesam Salah and Abu Aisheh, Yazan Issa (2025) Drivers for adopting augmented reality and virtual reality technologies in the construction project management in Gaza City. Journal of Asian Architecture and Building Engineering. ISSN 13467581

Akbar, Noreen Sher and Hussain, M.Fiaz and Ching, Dennis Ling Chuan and Farooq, Muhammad and Khan, Ilyas (2025) Numerical computation of PDE formed characterizing thermal rheology of Cu/Al2O3/TiO2 ternary nanoparticles flow between coaxial cylinders. International Journal of Thermofluids, 25. ISSN 26662027

Avramenko, Viktor V. and Watada, Junzo and Bondarenko, Mykyta O. and Kalashnykova, Nataliya and Hasan, Mohd Hilmi (2025) Encrypting Images Using the Sum of Functions of a Real Variable. IEEE Access, 13. 70872 – 70881. ISSN 21693536

Alatefi, Saad and Nait Amar, Menad and Agwu, Okorie Ekwe and Alkouh, Ahmad Bader (2025) Accurate prediction of water activity in ionic liquid-based aqueous ternary solutions using advanced explainable artificial intelligence frameworks. Chemical Engineering Science, 318. ISSN 00092509

Ahmad, Aqeel and Nazar, Masooma and Ismail, Marhaina and Abdulazeez, Ismail and Bustam, Mohamad Azmi and Al Hamouz, Othman Charles S. (2025) The role of carbon nanotubes and graphene oxide on the performance of metal-organic frameworks for CO2 capture. Physica B: Condensed Matter, 715. ISSN 09214526

Azizan, Nurul Athikah and Nasuha, Norhaslinda and Maarof, H. I. and Sufian, Suriati Binti and Wan Ismail, Wan Izhan Nawawi (2025) Multi-dye decolorization through electrocoagulation treatment utilizing iron electrode (IMS) from iron metal sludge. Next Materials, 9. ISSN 29498228

Adebanjo, Abiola Usman and Abbas, M. Yassir and Shafiq, Nasir and Khan, Iqbal M. and Ramzi, Ahmad Bazli and ElGawady, Mohamed A. (2025) Synergistic influence of TiO2-ZnO nanoparticles on the durability and antimicrobial performance of silica-based high-performance concrete for building applications. Journal of Building Engineering, 111. ISSN 23527102

Alameen, Mohammed Basheer and Abdalla Elraies, Khaled Abdalla and Almansour, Abdullah and Eissa Mohyaldinn, Mysara Eissa and Agwu, Okorie Ekwe (2025) An experimental study to control sand production in weakly consolidated sandstone formations: A chemical approach on formation strength. Results in Engineering, 27. ISSN 25901230

Ahmed, Tauseef and Rajan, Jose and Alam, Md Mehebub and Crispin, Reverant and Nuge, Tamrin and Raj, Vipin and Mohamed Saheed, Mohamed Shuaib (2025) Stretchable surfaces and electrodes for triboelectric nanogenerators: Challenges and opportunities. Nano Energy, 142. ISSN 22112855

Abualnaeem, Mohammed Madhat and Bin Mohd Zulkifli, Saiful Azrin and Ijaz, Faheem and Soomro, Hassan Ali (2025) Performance Evaluation of Two-Level and Three-Level NPC Inverters in Electric Vehicles under Various Drive Cycles and Switching Frequencies. Engineering, Technology and Applied Science Research, 15 (4). 25605 - 25611. ISSN 22414487; 17928036

Alao, Kehinde Temitope and Gilani, Syed Ihtsham Ul Haq and Sopian, Kamaruzzaman Bin and Alao, Taiwo Onaopemipo and Aslam, Zeshan and Hamzat, Abdulhammed K. and Alara, Oluwaseun Ruth (2025) Multi-method cooling strategies for photovoltaic systems: a comprehensive review of passive, active, and AI-optimized hybrid techniques. Multiscale and Multidisciplinary Modeling, Experiments and Design, 8 (8). ISSN 25208179; 25208160

Ahmed, Tauseef and Nuge, Tamrin and Irfan Khan, Muhammad Irfan and Khan, Lubna and Redzuan, Aein Afina Mohd and Sallih, Nabihah and Mohamed Saheed, Mohamed Shuaib (2025) Investigation of Morphology, Crystallization and Conductivity of Polyaniline based Electrospun Fibers. Journal of Advanced Research in Micro and Nano Engineering, 34 (1). 93 - 101. ISSN 27568210

Aminuddin, Muhammad Syahir and Bustam, Mohamad Azmi and Chuah, Chong Yang and Johari, Khairiraihanna Binti (2025) Metal Chloride-Functionalized Ionic Liquids for Highly Efficient H2S Conversion into Value-Added Elemental Sulfur: A Comprehensive Optimization Study and Techno-Economic Analysis. Industrial and Engineering Chemistry Research, 64 (26). 13489 - 13511. ISSN 15205045; 08885885

Agwu, Okorie Ekwe and Alatefi, Saad and Alkouh, Ahmad Bader (2025) Modelling the future of cleaner energy: Explainable artificial intelligence model for green hydrogen production rate estimation. Cleaner Engineering and Technology, 27. ISSN 26667908

Ali, Aijaz and Bingi, Kishore and Ibrahim, Rosdiazli Bin and Bansal, Lalit and Omar, Madiah Binti (2025) Zynq-7000 FPGA-in-the-loop implementation of fractional-order PID controllers using a hybrid fixed-point and floating-point approach. Engineering Research Express, 7 (2). ISSN 26318695

Anuar, Muhammad Amirul and Aljunid, Syed Alwee and Ammar, Syed Mohammad and Endut, Rosdisham Bin and Saad, N. M. and Kesavan, Suresh Manic and Al Naimi, Imad Saud and Hasoon Al Attar, Feras Nadhim (2025) Performance Improvement of SAC-OCDMA System based on FDW Code using EDFA for Passive Optical Distribution Network (PON). Nigerian Journal of Technological Development, 22 (3). 21 - 32. ISSN 01899546; 24372110

Ammar, Syed Mohammad and Ali, Norshamsuri R. and Anuar, Muhammad Amirul and Aljunid, Syed Alwee and Saad, N. M. and Endut, Rosdisham Bin and Kesavan, Suresh Manic and Al Naimi, Imad Saud and Hasoon Al Attar, Feras Nadhim (2025) Polarization Encoding and Decoding Techniques for a 10 Gbps Hybrid FDW-EDW OCDMA System. Nigerian Journal of Technological Development, 22 (3). 13 - 20. ISSN 01899546; 24372110

Alshameri, M. H. and Azizuddin, A. A. and Arshad, Azim B.M. and Mohammed, Haetham G. and Sadeq, Safwan (2025) Experimental Analysis of Thermal and Hydraulic Performance of FiberReinforced Polymer Fins in Compact Heat Exchangers. International Journal of Automotive and Mechanical Engineering, 22 (2). 12496 - 12510. ISSN 21801606; 22298649

Al-Hiyali, Mohammed Isam and Kannan, Ramani and Shutari, Hussein (2025) Optimizing State of Charge Estimation in Lithiumâ��Ion Batteries via Wavelet Denoising and Regression-Based Machine Learning Approaches. World Electric Vehicle Journal, 16 (6). ISSN 20326653

Ali, Syed Awais and Habib, Khairul and Zaed, Md Abu and Saidur, Rahman (2025) Cost-effective synthesis of vanadium carbide MXene from recycled waste precursors for phase change material applications in heat sink cooling. Results in Engineering, 26. ISSN 25901230

Ali, Saad and Ahmad, Faiz and Yusoff, Puteri Sri Melor Megat and Muhamad, Norhamidi A. and Varley, Russell John and Masset, Patrick Joseph and Haider, Waseem and Shahed, Chowdhury Ahmed (2025) Evaluation of noble metal decorated GNP reinforced Cu composite heat sinks for thermal performance of LED light. Diamond and Related Materials, 156. ISSN 09259635

Aziz, M. F. and Rahim, A. A. and Razak, E. S.A. and Jaaffar, S. N.A. and Buraidah, M. H. and Shukur, M. F. (2025) Enhanced ion transport and structural dynamics in gel polymer electrolytes containing a plasticizer prospect for DSSC application. Ionics, 31 (6). 6103 - 6115. ISSN 09477047; 18620760

Aromoye, Ibrahim Akinjobi and Hiung, Lo Hai and Sebastian, Patrick (2025) P-DETR: A transformer-based algorithm for pipeline structure detection. Results in Engineering, 26. ISSN 25901230

Abdulmunem, Abdulmunem R. and Mazali, Izhari Izmi and Samin, Pakharuddin Mohd and Sopian, Kamaruzzaman Bin and Ghazali, Habibah (2025) Bio-phase change materials based on stearin of sheep tail-fats loaded with nanoparticles: Melting performance analysis in rectangular cavity as a sustainable building envelopes. Energy and Buildings, 336. ISSN 03787788

Azhar, Nayli Adriana and Mohamed Radzi, Nurul Asyikin and Ramachandaramurthy, Vigna K. and Abdullah, F. Bin and Kahar, N. H.Abdul and Awang, Azlan Bin and Yeep, Choo Kan (2025) ELECTRIC VEHICLE CONSUMPTION DATASET TAILORED TO MALAYSIAN SITUATION AND IMPLEMENTED USING RAPID MINER AUTO-MODEL. Journal of Engineering Science and Technology, 20 (2). 490 - 509. ISSN 18234690

Ali, Syed Awais and Habib, Khairul and Zaed, Md Abu and Saidur, Rahman (2025) Synthesis and performance investigation of metal-organic framework derived from low-cost MXene precursor for enhanced thermal energy storage and photothermal conversion of phase change material. Journal of Energy Storage, 113. ISSN 2352152X

Alam, Khurshid and Ullah, Himayat and Iqbal, Muhammad Zohair and Husain, Afzal and Rasul, Adnan and Iqbal, Mohsin (2025) Structural integrity of offshore wind turbine blade under extreme gust and normal operating conditions. Results in Engineering, 25. ISSN 25901230

Atta, Mahmood Riyadh and Lal, Bhajan and Sofea, Munna Farra and Mohd Shariff, Azmi Mohd and Foo, Khor Siak (2025) The Synergistic Effect of Amino Acids and Sodium Dodecyl Sulphate (SDS) on CO2 Gas Hydrate Based Desalination. Paper Asia, 41 (2). 184 - 190. ISSN 02184540

Atta, Mahmood Riyadh and Lal, Bhajan and Abdulwahab, Abdulrab and Mohd Shariff, Azmi Mohd and Foo, Khor Siak (2025) The Regeneration of MEG as Recyclable Gas Hydrate Inhibitor: A Mini-Review from Laboratory to Machine Learning. International Journal of Engineering Trends and Technology, 73 (3). 130 - 139. ISSN 23490918; 22315381

Alawag, Aawag Mohsen and Alaloul, Wesam Salah and Mohamad, H. Bin and Liew, Mohd Shahir and Awang, Mokhtar B. and Baarimah, Abdullah O. (2025) Evaluating the role of critical success factors of Total quality management (TQM) implementation through SmartPLS in industrialized building projects (IBS). Ain Shams Engineering Journal, 16 (3). ISSN 20904479

Abdulkadir, Isyaka and Leong Sing, Wong and Ean, Lee Woen and Murali, G. and Mohammed, Bashar S. (2025) A holistic review of nanomaterials in strain-hardening cementitious composites: Insights into micro- and macromechanical, deformation, smart, and durability properties. Results in Engineering, 25. ISSN 25901230

Altaf, Muhammad Mohsin and Jaffari, Syeda Rabeea and Alalaoul, Wesam Salah and Musarat, Muhammad Ali and Ammad, Syed Ali (2025) Developing automated strategy of life cycle cost analysis (LCCA) with building information modeling (BIM) integration for building projects. Results in Engineering, 25. ISSN 25901230

Al-Karboly, Abdalrahman M.O. and Ibrahim, Adnan and Fazlizan, Ahmad and Sopian, Kamaruzzaman Bin and Al-Aasam, Anwer B. and Ishak, Muhammad Amir Aziat Bin and Al-Waeli, Ali H.A. and Elmnifi, Monaem (2025) Experimental evaluation of a photovoltaic thermal collector using twisted tape absorber with nano-enhanced phase change material for thermal storage. Journal of Energy Storage, 109. ISSN 2352152X

Aslam, Bilal and Maqsoom, Ahsen and Hassan, Usman and Maqsoom, Sidra and Alaloul, Wesam Salah and Musarat, Muhammad Ali and Shahzaib, Muhammad and Irfan, Muhammad (2025) Comparison Between Machine Learning and Bivariate Statistical Models for Groundwater Recharge Zones. Iranian Journal of Science and Technology - Transactions of Civil Engineering, 49 (1). 853 - 876. ISSN 22286160

Abioye, Kunmi Joshua and Rajamanickam, Ricky and Ogunjinmi, Temidayo and Paul, Sujata and Selvasembian, Rangabhashiyam and Ighalo, Joshua O. (2025) Advancements in biomass waste conversion to sustainable biofuels via gasification. Chemical Engineering Journal, 505. ISSN 13858947

Al-Karboly, Abdalrahman M.O. and Ibrahim, Adnan and Tarabsheh, Anas Al and Al-Aasam, Anwer B. and Al-Waeli, Ali H.A. and Fazlizan, Ahmad and Sopian, Kamaruzzaman Bin (2025) Performance of twisted tape absorber-based photovoltaic thermal systems in clockwise and counterclockwise configurations. Case Studies in Thermal Engineering, 66. ISSN 2214157X

Abdullah, M. N. and Mohamad Zaidi, Umi Zalilah and Mustapha, Mazli B. and Mustapha, F. Bin (2025) Investigating the impact of surface treatment on oxide layer formation in carbon steel for aerospace applications. 255 - 274.

Abdulkadir, Isyaka and Leong Sing, Wong and Ean, Lee Woen and Mohammed, Bashar S. and Kong, Sih Ying (2025) Optimizing environmentally efficient mortar properties through synergistic integration of cellulose microfibers and calcined palm oil fuel ash: A response surface methodology technique. Construction and Building Materials, 458. ISSN 09500618

Amadi, Azubuike Hope and Ajienka, Joseph Atubokiki and Akaranta, Onyewuchi Emmanuel and Moses, Pwafureino Reuel and Achara, Nnaemeka U. and Ola, Victor Damilare and Udo, Robinson David (2025) A review of soil resistivity testing for enhanced corrosion Control: Overcoming limitations through integrated geophysical approaches and alternative methodologies. Measurement: Journal of the International Measurement Confederation, 242. ISSN 02632241

Adamu, Shamsuddeen and Alhassan Alhussian, Hitham Seddig and Aziz, Norshakirah Ab and Kadir, Said Jadid A. and Alwadin, Ayed and Abdullahi, Mujaheed and Aliyu, Garba (2025) Unleashing the power of Manta Rays Foraging Optimizer: A novel approach for hyper-parameter optimization in skin cancer classification. Biomedical Signal Processing and Control, 99. ISSN 17468108; 17468094

Adamu, Shamsuddeen and Hitham Siddig, A. A. and Kadir, Said Jadid A. and Alwadin, Ayed and Aliyu, Garba and Yakubu, Muhammad Muntasir and Aliyu, Dahiru Adamu and Abdullahi, Mujaheed (2025) Generative Adversarial Networks in Time Series: Modifications and Applications. Lecture Notes in Electrical Engineering, 1417 L. 205 - 218. ISSN 18761119; 18761100

Alqushaibi, Alawi and Hasan, Mohd Hilmi Bin and Kadir, Said Jadid A. and Danyaro, Kamaluddeen Usman and Ali, Rao Faizan and Ragab, Mohammed Gamal and Sumiea, Ebrahim Hamid Hasan and Al-Selwi, Safwan Mahmood (2025) A Hybrid Deep Neural Network for Early Diagnosis of Alzheimer's Disease. Lecture Notes in Electrical Engineering, 1417 L. 189 - 204. ISSN 18761119; 18761100

Alqushaibi, Alawi and Hasan, Mohd Hilmi Bin and Kadir, Said Jadid A. and Danyaro, Kamaluddeen Usman and Al-Selwi, Safwan Mahmood and Ragab, Mohammed Gamal and Sumiea, Ebrahim Hamid Hasan (2025) Gradient Penalty Sine Cosine Algorithm (GP-SCA). Lecture Notes in Electrical Engineering, 1417 L. 219 - 231. ISSN 18761119; 18761100

Abdullah, null and Faye, Ibrahima and Belhaouari, Samir Brahim and Vurity, Anudeep and Ahmad, Tazeem (2025) HyperGCN: Interpreting Hyperscanning EEG Signals for Common Multi-Task Classification Using Graph Convolutional Networks. IEEE Signal Processing Letters, 32. 2669 - 2673. ISSN 15582361; 10709908

Al-Jothery, Husam Kareem Mohsin and Albarody, Thar Mohammed Badri (2025) Study on Mechanical Behavior of Double Corrugation Surface Structure of Thermoset Composite. Journal of Engineering and Sustainable Development, 29 (3). 282 - 288. ISSN 25200917; 25200925

Alzubi, Khalid M. and Alaloul, Wesam Salah and Al Salaheen, M. and Musarat, Muhammad Ali and Baarimah, Abdullah O. and Mushtaha, Ahmed Wajeh H. (2025) Indoor construction productivity assessment using computer vision and mask region-based convolutional neural networks. Construction Innovation. ISSN 14714175; 14770857

Anuar, Muhammad Amirul and Ammar, Syed Mohammad and Endut, Rosdisham Bin and Aljunid, Syed Alwee and Ali, Norshamsuri R. and Saad, Naufal Mohamad and Al-Khafaji, Hamza Mohammed Ridha (2025) Performance Analysis of the New Flexible Double Weight (FDW) Code With Various Detection Techniques. IEEE Access, 13. 64841 - 64852. ISSN 21693536

Ariffin, Eddy Azrai and Ismail, M. Sazli B. and Naim, M. Khoushaini M. and Jupri, M. Faieez B.M. and Rasli, Aizat and Alhassan Alhussian, Hitham Seddig and Aziz Izzatdin, Izzatdin A. and Mohd Jaafar, Nur Syakirah and Saed, Kamariah Abu (2025) Investigation of the Metocean Effects on Marine Loading Arms (MLA) Failures Using Machine Learning. Lecture Notes in Electrical Engineering, 1417 L. 256 - 266. ISSN 18761119; 18761100

Amur, Zaira Hassan and Yew, Kwang Hooi and Soomro, Gul Muhammad and Bhanbhro, Hina and Pitafi, Shahneela and Sohu, Najamuddin (2025) Advanced Keypoint(s) Recognition with KeyBERT(+): A Comparative Study. Lecture Notes in Electrical Engineering, 1417 L. 9 - 20. ISSN 18761119; 18761100

Alshalif, Abdullah Faisal and Irwan, J. M. and Mansour, Mohammed Ali and Imran, Arif and Yehya Alshaeer, Honin Ali and Mutafi, Ayad and Hakim, S. J.S. and Alraeeini, Ahmed Saleh (2025) Sustainable bio-foamed concrete bricks: optimising compressive strength with rice husk ash, coal bottom ash, and Bacillus tequilensis. European Journal of Environmental and Civil Engineering. ISSN 19648189

B

Bheel, Naraindas and Baikerikar, Abhijeet Vidyadhar and Mohammed, Bashar S. (2025) Using Optimization Techniques on Mechanical Characteristics and Sustainability Assessment of Rubberized Concrete Blended with PVA Fiber Through Response Surface Methodology. International Journal of Concrete Structures and Materials, 19 (1). ISSN 19760485

Bakthavatchalam, Balaji and Al-Doori, Ghassan F. and Algarni, Salem and Alqahtani, Talal and Rajamony, Reji Kumar and Habib, Khairul and Hussein, Omar A. and Barewar, Surendra D. (2025) Life cycle cost analysis of an innovative nanofluid assisted photovoltaic thermoelectric air conditioner for energy efficiency enhancement in buildings. Case Studies in Thermal Engineering, 73. ISSN 2214157X

Bhatti, Hamza Siddique and Abdullah, Muhammad Aizzuddin and Hadeed, Muarij and Epin, Vorathin and Mohamad, Hisham and Lim, Kok-Sing (2025) Highly Sensitive Fiber Bragg Grating Geophone for Low-Frequency Seismic Detection. IEEE Transactions on Instrumentation and Measurement, 74. ISSN 00189456

Bingi, Kishore and Bhukya, Ramadevi and Kasi, Venkata Ramana (2025) Fractional-Order Activation Functions for Neural Networks: Case Studies on Forecasting Wind Turbines’ Generated Power. Studies in Systems, Decision and Control, 588. 1 – 238. ISSN 21984182

Bello, Usman and Adamu, Haruna and Samsuri, Shafirah and Qamar, Mohammad and Wan Osman, Wan Nur Aisyah (2025) Solvent-Aided Crystallization for Biodiesel Purification: A Review of the Technique's Proficiency. ChemBioEng Reviews. ISSN 21969744

Bakthavatchalam, Balaji and Al-Doori, Ghassan Fadil Lattif and Algarni, Salem A. and Alqahtani, Talal and Rajamony, Reji Kumar and Habib, Khairul and Hussein, Omar Assi and Barewar, Surendra D. (2025) Life cycle cost analysis of an innovative nanofluid assisted photovoltaic thermoelectric air conditioner for energy efficiency enhancement in buildings. Case Studies in Thermal Engineering, 73. ISSN 2214157X

Bello, Usman and Adamu, Haruna and Samsuri, Shafirah Binti and Qamar, Mohammad Tariq and Wan Osman, Wan Nur Aisyah (2025) Solvent-Aided Crystallization for Biodiesel Purification: AÂ Review of the Technique's Proficiency. ChemBioEng Reviews, 12 (4). ISSN 21969744

Bello, Usman and Adamu, Haruna and Samsuri, Shafirah Binti and Ibrahim, Hamza and Qamar, Mohammad Tariq (2025) Improving biodiesel oxidative stability using antioxidants: An insight into the research trends and future prospects from a bibliometric approach. Results in Engineering, 26. ISSN 25901230

Bhatti, Hamza Siddique and Aizzuddin, A. M. and Hadeed, Muarij and Epin, Vorathin and Mohamad, H. Bin and Lim, Koksing (2025) Temperature and chirp compensated fibre Bragg grating geophone for improved seismic detection. Optics Communications, 579. ISSN 00304018

Baffa, Muhammad Abubakar and Mustaffa, Z. Binti and Ahmad, Niraku Rosmawati Binti and El-Atroush, Mohamed E. and Yaro, Nura Shehu Aliyu and Ben Seghier, Mohamed El Amine (2025) Performance of geothermal energy piles in buildings: A bibliometric analysis and systematic review. Energy and Buildings, 331. ISSN 03787788

Bena, Yunusa Adamu and Ibrahim, Roliana Binti and Mahmood, Jamilah and Al-Dhaqm, Arafat Mohammed Rashad and Alshammari, Ahmad Abdullah and Nasser, Maged and Nura Yusuf, Muhammed and Ayemowa, Matthew Ojo (2025) Big Data Governance Challenges Arising From Data Generated by Intelligent Systems Technologies: A Systematic Literature Review. IEEE Access, 13. 12859 - 12888. ISSN 21693536

Bhanbhro, Hina and Yew, Kwang Hooi and Zakaria, Mohammad Nordin Bin and Hashmi, Syed Abdul Moiz and Amur, Zaira Hassan and Maqsood, Aarish (2025) ACBAM: Adaptive Convolutional Block Attention Module for Object Detection. Lecture Notes in Electrical Engineering, 1417 L. 39 - 47. ISSN 18761119; 18761100

Bhatti, Hamza Siddique and Abdullah, Muhammad Aizzuddin and Hadeed, Muarij and Epin, Vorathin and Mohamad, H. Bin and Lim, Koksing (2025) Highly Sensitive Fiber Bragg Grating Geophone for Low-Frequency Seismic Detection. IEEE Transactions on Instrumentation and Measurement, 74. ISSN 00189456; 15579662

C

Chaudhari, Anagha and Hitham Seddig, A.A. and Raut, Roshani and Sarlan, Aliza (2025) FedRecSys: A Federated Learning-Based Recommender System for Concept Drift Adaptation. IEEE Access, 13. 66478 – 66491. ISSN 21693536

Chala, Girma T. and Sulaiman, Shaharin A. and Chen, Xuecheng (2025) A Study on the Performance of Soiled Solar Photovoltaic Panels at Different Tilt Angles in Al Seeb, Oman. Energies, 18 (2). ISSN 19961073

Chaichan, Miqdam T. and Kazem, Hussein A. and Mahdi, Maytham T. and Al-Waeli, Ali H.A. and Khadom, Anees A. and Sopian, K. (2025) Optimal nanofluid selection for photovoltaic/thermal (PV/T) systems in adverse climatic conditions. Case Studies in Thermal Engineering, 65. ISSN 2214157X

Chandran, Davannendran and Raviadaran, Revathi and Mohamad, Taib Iskandar and Mohd Saufi, Nurul Adzrin Sofea and Salim, Mohammed Dhia and Samuel, Olusegun David (2025) Effect of waste-fed black soldier fly larvae oil-based biodiesel towards diesel engine fuel delivery metal corrosion and elastomer degradation. Results in Engineering, 27. ISSN 25901230

Chowdhury, Syed Niaz Hossain and Ahmad, Faiz and Kee, K. E. and Ramli, Siti Haslina Mohd (2025) The Effects of Corn Kernel Bio-Filler on the Fire Retardancy of Intumescent Fire-Retardant Coating for Steel Structures. Engineering, Technology and Applied Science Research, 15 (4). 25739 - 25745. ISSN 22414487; 17928036

Chinda, Francis Emmanuel and Hanif, Mehwish and Soeung, Socheatra and Yahya, Muhammad Sani and Abdullah Al-Gburi, Ahmed Jamal and Bashir, Faisal and Zahoor, Furqan and Cheab, Sovuthy (2025) Design of sub-6 GHz BPF using chained even and odd mode admittance polynomials for 5G C-band applications. Results in Engineering, 25. ISSN 25901230

Chuah, Chong Yang and Ho, Yin Liang and Syed, Abdul Moiz Hashmi and Thivyalakshmi, K. Gopala Krishnan and Yang, Euntae and Johari, Khairiraihanna Binti and Yang, Yanqin and Poon, Wai Ching (2025) Applicability of Adsorbents in Direct Air Capture (DAC): Recent Progress and Future Perspectives. Industrial and Engineering Chemistry Research, 64 (8). 4117 - 4147. ISSN 15205045; 08885885

Chan, Yi Herng and Yiin, Chung Loong and Huang, Meemee and Lock, Serene Sow Mun and Chin, Bridgid Lai Fui and Wee, Jia Sheng and Foong, Shin Ying and Lam, Su Shiung (2025) Advances in bi-reforming of methane: Syngas production for low-carbon energy solutions. Chemical Engineering Journal, 505. ISSN 13858947

Chala, Girma T. and Sulaiman, Shaharin Anwar B. and Chen, Xuecheng (2025) A Study on the Performance of Soiled Solar Photovoltaic Panels at Different Tilt Angles in Al Seeb, Oman. Energies, 18 (2). ISSN 19961073

Chandrasegaran, Ormiila and Mustapha, F. Bin and Abdullah, M. N. and Anwar, Murniwati and Mustapha, Mazli B. and Adzis, Zuraimy Bin (2025) Lightning damage assessment on solar panels using in-house portable infrared thermography camera with Convolutional Neural Network (CNN) algorithm. Nondestructive Testing and Evaluation, 40 (8). 3815 - 3857. ISSN 10589759; 14772671

D

Din, Sahibzada Imad Ud and Ibrahim, Adnan and Fazlizan, Ahmad and Kazem, Hussein A. and Sopian, Kamaruzzaman Bin and Al-Aasam, Anwer B. and Rahmat, Muhammad Aqil Afham (2025) Performance analysis of a photovoltaic double-pass solar air heater with staggered-Sandwich PCM cylinders as dual cooling and latent heat storage. Journal of Energy Storage, 132. ISSN 2352152X

Desmira, Desmira and Abu Bakar, Norazhar and Hamid, Mustofa Abi and Hakiki, Muhammad and Ismail, Affero Bin and Fadli, Radinal (2025) Enhancing artificial neural network performance for energy efficiency in laboratories through principal component analysis. International Journal of Advances in Applied Sciences, 14 (2). 310 - 321. ISSN 22528814; 27222594

Desikan, Jayameena and Singh, Sushil Kumar and Jayanthiladevi, A. and Bhushan, Shashi and Rishiwal, Vinay and Kumar, M. (2025) Hybrid Machine Learning-Based Fault-Tolerant Sensor Data Fusion and Anomaly Detection for Fire Risk Mitigation in IIoT Environment. Sensors, 25 (7). ISSN 14248220

Danish, Mohd and Al-Amin, Md and Rubaiee, Saeed Salem Al and Parameswari, R. P. and Abdul-Rani, Ahmad Majdi and Ahmed, Anas and Yildirim, Mehmet Bayram (2025) Investigation of coated 316L steel surface employing carbon nanotubes mixed-electrical discharge machining for biomedical applications. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 239 (1). 348 - 365. ISSN 09544089; 20413009

F

Fayyaz, Abdul Muiz and Abdulkadir, Said Jadid and Hassan, Shahab Ul and Al-Selwi, Safwan Mahmood and Sumiea, Ebrahim Hamid and Talib, Lareib Fatima (2025) The role of advanced machine learning in COVID-19 medical imaging: A technical review. Results in Engineering, 26. ISSN 25901230

Foong, Phey Yee and Voon, Chun Hong and Lim, Bee Ying and Teh, Pei Leng and Yeoh, Cheow Keat and Parmin, Nor Azizah and Gopinath, Subash C. B. and Low, Foo Wah and Rahim, Nor Azura Abdul and Perumal, Veeradasan (2025) Microwave Welding of Polypropylene Using SiC Nanowires as Susceptors: Effect of Silane Modification on Joint Performance. Journal of Materials Engineering and Performance. ISSN 10599495

Faldo, Raey and Mandala, Satria and Astuti, Rina Pudji and Prihatmanto, Ary Setijadi and Mohd Zahid, Mohd Soperi (2025) APD-BayNet: Jakarta Air Quality Index Prediction Using Bayesian Optimized Tabnet. IEEE Access, 13. 57734 – 57752. ISSN 21693536

Fitriana, Laila D. and Purwanto, Aris and Munir, F. A. and Wang, W. C. and Saputro, Herman (2025) Optimization of cylindrical stepped micro-combustors for enhanced thermoelectric power generation: A comprehensive numerical and experimental study on wire mesh positioning and material selection. e-Prime - Advances in Electrical Engineering, Electronics and Energy, 13. ISSN 27726711

Fayyaz, Abdul Muiz and Kadir, Said Jadid A. and Hassan, Shahab Ul and Al-Selwi, Safwan Mahmood and Sumiea, Ebrahim Hamid Hasan and Talib, Lareib Fatima (2025) The role of advanced machine learning in COVID-19 medical imaging: A technical review. Results in Engineering, 26. ISSN 25901230

Foong, Phey Yee and Voon, Chun Hong and Lim, B. Y. and Teh, Pei Leng and Yeoh, Cheow Keat and Parmin, Nor Azizah and Gopinath, Subash C.B. and Low, Foowah and Abdul Rahim, Nor Azura and Veeradasan, P. (2025) Microwave welding with SiCNW/PMMA nanocomposite thin films: enhanced joint strength and performance. Nanotechnology, 36 (11). ISSN 09574484; 13616528

Fayyaz, Muhammad Shahzeb and Abbasi, Amir Zaib and Altaf, Khurram and Alqahtani, Nasser and Ting, Ding Hooi (2025) Not inspired enough: the mediating role of customer engagement between YouTubeâ��s perceived advertising value and customer inspiration. Kybernetes, 54 (2). 1175 - 1198. ISSN 0368492X

Foong, Phey Yee and Voon, Chun Hong and Lim, B. Y. and Teh, Peileng and Yeoh, Cheow Keat and Parmin, Nor Azizah and Gopinath, Subash C.B. and Low, Foowah and Abdul Rahim, Nor Azura and Veeradasan, P. (2025) Microwave Welding of Polypropylene Using SiC Nanowires as Susceptors: Effect of Silane Modification on Joint Performance. Journal of Materials Engineering and Performance. ISSN 10599495; 15441024

G

Gasmi, Hatem Hassin and Obalalu, Adebowale Martins and Khan, Umair and Ishak, Anuar Mohd and Balogun, Abdullateef Oluwagbemiga and Alessa, Nazek A. and Magzoub, Omer A. (2025) Irreversibility analysis of the two-phase non-Newtonian nanofluid model induced by converging/diverging channels with heat source/sink and viscous dissipation effects. Alexandria Engineering Journal, 123. 497 - 510. ISSN 11100168

Garba, Zaharaddeen N. and Zango, Zakariyya Uba and Adamu, Haruna and Haruna, Abdurrashid and Menkiti, Nnamdi David and Danmallam, Ummulkhairi Nasiru and Ali, Ahmed Fate and Uba Zango, Muttaqa Uba and Ratanatamskul, Chavalit (2025) A review on zeolites for adsorptive desulfurization of crude oil and natural gas: Kinetics, isotherms, and thermodynamics studies. Progress in Engineering Science, 2 (2). ISSN 29504252

Gasmelseed, Abdelrahman and Ismeal, Mhadi A. and Said, Mior A.M. and Ahmad, Faiz (2025) Performance investigation of mono and hybrid nanofluids in a liquid battery thermal management system under high discharge rate and different drive cycle conditions. Journal of Energy Storage, 116. ISSN 2352152X

Ghoto, Asghar Ali and Aziz, Abd Rashid Abd and Ismeal, Mhadi A. and Mulk, Waqad Ul (2025) Investigation of biosurfactant dosage on water-in-biodiesel fuel spray characteristics and a microscopic spray of water-in-biodiesel droplet micro-explosion. Energy, 318. ISSN 03605442; 18736785

Goh, Soon Wah and Ng, Qi Hwa and Enche Ab Rahim, Siti Kartini and Low, Siew Chun and Hoo, Peng Yong and Yeo, Ryan Yow Zhong and Chew, Thiam Leng and Jawad, Zeinab Abbas (2025) Recent advancements in smart materials for the removal of organic, inorganic and microbial pollutants in water treatment: A review. Journal of Water Process Engineering, 70. ISSN 22147144

H

Hussnain, S.M. and Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Choudhry, R.S. and Hussain, M.Z. (2025) Hygrothermal progressive damage model for resin-infused thermoplastic non-crimp fabric composites. International Journal of Solids and Structures, 317. ISSN 00207683

Haque, Md Ashraful and Ahammed, Md Sharif and Rahaman, Md Shokor A. and Ahmed, Md Kawsar and Nahin, Kamal Hossain and Sawaran Singh, Narinderjit Singh and Rahman, Md Afzalur and Jaafar, Jafreezal and Al-Bawri, Samir Salem (2025) High Performance Quad Port Compact MIMO Antenna for 38 GHz 5G Application with Regression Machine Learning Prediction. Journal of Infrared, Millimeter, and Terahertz Waves, 46 (7). ISSN 18666892

Haoran, Chen and Karuppanan, Saravanan and Perumal, Veeradasan and Ovinis, Mark and Lim, Frank and Kumar, Suria Devi Vijaya (2025) A Novel Steel Lazy Wave Riser Configuration for Ultra-Deepwater. Civil Engineering Journal (Iran), 11 (1). 33 – 43. ISSN 26766957

Haris, Nur Izzah Nabilah and Osman Al Edrus, Syeed SaifulAzry and Kamaruddin, Norfaryanti and Abdul Raof, Nurliyana and Noraida, A.W. and Wondi, Mohd Hafizz (2025) Environmental and Economic Impacts of Green Panels. Engineering Materials, Part F. 191 – 209. ISSN 16121317

Haque, Md Ashraful and Ahammed, Md Sharif and A Rahaman, Md Shokor and Ahmed, Md Kawsar and Nahin, Kamal Hossain and Sawaran Singh, Narinderjit Singh and Rahman, Md Afzalur and Jaafar, Jafreezal Bin and Al-Bawri, Samir Salem (2025) High Performance Quad Port Compact MIMO Antenna for 38 GHz 5G Application with Regression Machine Learning Prediction. Journal of Infrared, Millimeter, and Terahertz Waves, 46 (7). ISSN 18666892; 18666906

Hussnain, S. M. and Shah, Syed Zulfiqar Hussain and Megat-Yusoff, Puteri Sri Melor B. and Choudhry, Rizwan Saeed and Hussain, M. Z. (2025) Hygrothermal progressive damage model for resin-infused thermoplastic non-crimp fabric composites. International Journal of Solids and Structures, 317. ISSN 00207683

Hazemi, Sofia Afifah and Majid, Noor Diana Abdul and Mirta, W. and Abdul Aziz, Hanida (2025) OSH Management in Small and Medium Enterprises: A Bibliometric Review. Jurnal Optimasi Sistem Industri, 24 (1). 121 - 139. ISSN 20884842; 24428795

Hassan, Adeel and Altaf, Khurram and Ahmed, Naveed and Pedapati, Srinivasa Rao and Marode, Roshan Vijay (2025) Enhancing microhardness and tensile strength of in-process cooled Al-7075-T651 FSAM laminates without compromising ductility through PWHT. Journal of Advanced Joining Processes, 11. ISSN 26663309

Hadeed, Muarij and Bhatti, Hamza Siddique and Aizzuddin, A. M. and Epin, Vorathin and Mohamad, H. Bin (2025) Review of fibre optic hydrophones for potential application in offshore carbon storage monitoring. Sensors and Actuators A: Physical, 386. ISSN 09244247

Hira, Noor e. and Lock, Serene Sow Mun and Lim, Lam Ghai and Arshad, Ushtar and Darban, Mehtab Ali and Farooqi, Abid Salam and Ilyas, Suhaib Umer and Yiin, Chung Loong (2025) Molecular simulation and ANN modelling for Cadmium (Cd) and Lead (Pb) adsorption from water using zeolites. Results in Engineering, 25. ISSN 25901230

Hussain, M. Z. and Shah, Syed Zulfiqar Hussain and Megat-Yusoff, Puteri Sri Melor B. and Choudhry, Rizwan Saeed and Sharif, Tahir and Hussnain, S. M. (2025) Optimizing flexural performance of 3D fibre-reinforced composites with hybrid nano-fillers using response surface methodology (RSM). Composites Part A: Applied Science and Manufacturing, 190. ISSN 1359835X

Haque, Md Ashraful and Ahammed, Md Sharif and Soeung, Socheatra and Ananta, Redwan Al Mahmud Asad and Nirob, Md Asraful Sharker and Sawaran Singh, Narinderjit Singh and Jizat, Noorlindawaty Md and Alsowail, Saeed and Al-Bawri, Samir Salem (2025) Machine learning based compact MIMO antenna array for 38 GHz millimeter wave application with robust isolation and high efficiency performance. Results in Engineering, 25. ISSN 25901230

Hussain, M. Z. and Shah, Syed Zulfiqar Hussain and Megat-Yusoff, Puteri Sri Melor B. and Choudhry, Rizwan Saeed and Ahmad, Faiz and Hussnain, S. M. (2025) Toughening epoxy resin system using nano-structured block copolymer and graphene nanoplatelets to mitigate matrix microcracks in epoxy nanocomposites: A DoE based framework. Materials Today Communications, 43. ISSN 23524928

Hasan, Mohd Hilmi Bin and Mohamad, H. Bin and Shafiq, Nasir and Kadir, Said Jadid A. (2025) Preface LNEE. Lecture Notes in Electrical Engineering, 1417 L. v. ISSN 18761119; 18761100

I

Ismael, Mhadi A. and Silmyi, Izz Rasyad and Mulk, Waqad Ul and El-Adawy, Mohammed and Aziz, A. Rashid A. and Babiker, M.Elamen and Nemitallah, Medhat A. (2025) The role of nanoparticles in combustion improvement: Performance and emission analysis of a DI diesel engine fuelled with water-in-biodiesel emulsions enhanced by mono and hybrid nanoparticles. Applied Thermal Engineering, 274. ISSN 13594311

Imran, Muhammad and Lau, Kok Keong and Ahmad, Faizan and Mohd Laziz, Afiq (2025) A comprehensive review of Computational Fluid Dynamics (CFD) modelling of membrane gas separation process. Results in Engineering, 26. ISSN 25901230

Ismeal, Mhadi A. and Silmyi, Izz Rasyad and Mulk, Waqad Ul and El-Adawy, Mohammed and A. Aziz, A. Rashid and Babiker, Mohammed Elamen and Nemitallah, Medhat A. (2025) The role of nanoparticles in combustion improvement: Performance and emission analysis of a DI diesel engine fuelled with water-in-biodiesel emulsions enhanced by mono and hybrid nanoparticles. Applied Thermal Engineering, 274. ISSN 13594311

Imran, Muhammad and Lau, K. K. and Ahmad, Faizan and Mohd Laziz, Afiq (2025) A comprehensive review of Computational Fluid Dynamics (CFD) modelling of membrane gas separation process. Results in Engineering, 26. ISSN 25901230

Iqbal, Mohsin and Karuppanan, Saravanan and Veeradasan, P. and Ovinis, Mark and Iqbal, Muhammad Zohair (2025) Development of Novel Surrogate Models for Stress Concentration Factors in Composite Reinforced Tubular KT-Joints. Civil Engineering Journal (Iran), 11 (4). 1458 - 1475. ISSN 26766957; 24763055

Ismail, Marhaina and Bustam, Mohamad Azmi and Yeong, Yin Fong and Ahmad, Aqeel (2025) Prediction of Binary Adsorption Isotherms of Carbon Dioxide and Methane from Pure Adsorption Data. Journal of Advanced Research in Micro and Nano Engineering, 30 (1). 48 - 57. ISSN 27568210

Iqbal, Mohsin and Karuppanan, Saravanan and Veeradasan, P. and Ovinis, Mark and Iqbal, Muhammad Zohair (2025) Design and testing of a test rig for tubular joints hot-spot stress determination. Results in Engineering, 25. ISSN 25901230

Iqbal, Mohsin and Karuppanan, Saravanan and Veeradasan, P. and Ovinis, Mark and Khan, Afzal (2025) Stress concentration factors in CFRP-reinforced KT-joints under multiplanar bending loads: experimental and numerical investigation. Results in Engineering, 25. ISSN 25901230

Ibrahim, Muhammad Khalid and Dayarathne, Narada and Lim, Jun Wei and Paudel, Shukra Raj and Shahid, Muhammad Kashif and Mainali, Bandita (2025) Foaming in wastewater treatment plants: Deciphering biological foaming and challenges in MBR systems. Journal of Water Process Engineering, 71. ISSN 22147144

Irshad, Kashif and Zayed, Mohamed E. and Rehman, S. and Al-Masaabi, Talal A. and Zahir, Md H. and Habib, Khairul and Saha, Bidyut Baran (2025) Experimental study and synergistic performance analysis of phase change material assisted cold thermal storage system for energy efficient air cooling. Journal of Energy Storage, 108. ISSN 2352152X

Ismail, Azlan B. and Agos Jawaddi, Siti Nuraishah and Sazali, Faris Haziq and Zain, Jasni Mohamad and Jaafar, Jafreezal Bin and Hasan, Mohd Hilmi Bin and Aziz Izzatdin, Izzatdin A. and Haron, Nazleeni Samiha (2025) A comprehensive review of interactive visualization for MetOcean domain. Journal of Visualization. ISSN 18758975; 13438875

J

Jamil, Abdullah and Baharom, M.B. and Tariq, Adeel and Azam, Farooq I. (2025) Validation of different turbulence models to analyse flow characteristics within a toroidal crank-rocker engine using particle image velocimetry. Alexandria Engineering Journal, 127. 705 – 721. ISSN 11100168

Janga, Venkata Somi Reddy and Awang, Mokhtar and Sallih, Nabihah and Lemma, Tamiru Alemu (2025) Thermo-mechanical and material flow characteristics of tool sequencing dynamics in refill FSSW of thin alclad AA7075-T6 sheets: Numerical analysis using meshless smoothed-particle hydrodynamics method. Journal of Advanced Joining Processes, 11. ISSN 26663309

Jason, Cheah and Ilyas, Suhaib Umer and Ridha, Syahrir and Sehar, Umara and Alsaady, Mustafa and Krishna, Shwetank (2025) Prediction of Rheological and Filtration Loss Properties of Nano-Zirconium-Dioxide Drilling Fluids via Machine Learning Techniques for Energy Exploration. Lecture Notes in Civil Engineering, 558 LN. 469 – 477. ISSN 23662557

Jamil, Abdullah and Baharom, Masri Bin and Tariq, Adeel and Azam, Farooq I. (2025) Validation of different turbulence models to analyse flow characteristics within a toroidal crank-rocker engine using particle image velocimetry. Alexandria Engineering Journal, 127. 705 - 721. ISSN 11100168

Janga, Venkata Somi Reddy and Awang, Mokhtar B. and Sallih, Nabihah and Lemma, Tamiru Alemu (2025) Thermo-mechanical and material flow characteristics of tool sequencing dynamics in refill FSSW of thin alclad AA7075-T6 sheets: Numerical analysis using meshless smoothed-particle hydrodynamics method. Journal of Advanced Joining Processes, 11. ISSN 26663309

Jusoh, Norwahyu Binti and Mohd Hasbullah, Muhammad Imran (2025) Accelerated Synthesis of GIS Zeolite via Ultrasonic-Aided Hydrothermal Growth. Materials Science Forum, 1144. 29 - 37. ISSN 02555476; 16629752

K

Khan, Umair and Pao, William and Pilario, Karl Ezra and Sallih, Nabihah and Sohail, Muhammad and Azam, Huzaifa (2025) Real-time automatic flow regime classification and mapping for vertical pipes using dynamic pressure signals. International Journal of Multiphase Flow, 189. ISSN 03019322

Khairuddin, Siti Hajar Mohd and Ahmad, Muhammad Azrin and Mohamad, Mohdsham and Sokkalingam, Rajalingam (2025) Redefining n-th Order Limit Languages in Extended-H Splicing System. WSEAS Transactions on Computer Research, 13. 58 – 64. ISSN 19918755

Khan, Adam and Ali, Asad and Khan, Jahangir and Ullah, Fasee and Faheem, Muhammad (2025) Exploring Consistent Feature Selection for Software Fault Prediction: An XAI-Based Model-Agnostic Approach. IEEE Access, 13. 75489 – 75520. ISSN 21693536

Khan, Adam and Ali, Asad and Khan, Jahangir and Ullah, Fasee and Faheem, Muhammad (2025) Using Permutation-Based Feature Importance for Improved Machine Learning Model Performance at Reduced Costs. IEEE Access, 13. 36421 – 36435. ISSN 21693536

Khan, Umair and Pao, William K.S. and Pilario, Karl Ezra Salgado and Sallih, Nabihah and Sohail, Muhammad and Azam, Huzaifa (2025) Real-time automatic flow regime classification and mapping for vertical pipes using dynamic pressure signals. International Journal of Multiphase Flow, 189. ISSN 03019322

Krishani, Murugiah and Chong, Jia Ning and Lim, Wan Rong and Jusoh, Norwahyu Binti and Soraya Sambudi, Nonni Soraya and Suhaimi, Hazwani (2025) Synthesis and Characterization of Keratin-Based Scaffold for Potential Tissue Engineering Applications. Fibers, 13 (7). ISSN 20796439

Kazem, Hussein A. and Chaichan, Miqdam T. and Al-Waeli, Ali H.A. and Sopian, Kamaruzzaman Bin and Alnaser, Waheeb Essa and Kazmerski, Lawrence L. and Alnaser, Naser Waheeb (2025) A review of photovoltaic/thermal (PV/T) incorporation in the hydrogen production process. Global Energy Interconnection, 8 (3). 363 - 393. ISSN 25900358; 20965117

Khan, Abdul Mateen and Alaloul, Wesam Salah and Musarat, Muhammad Ali and Fayyaz, Abdul Muiz (2025) Optimizing sustainable alternatives in value engineering Decision-Making through BIM-Integrated plugin automation for buildings. Ain Shams Engineering Journal, 16 (6). ISSN 20904479

Kumar, Aneel and Kumar, Rabinder and Bheel, Naraindas and Ali, Sabir and Shaikh, Farhan Ahmed and Yousfani, Abdul Mannan and Rizvi, Samar Hussain (2025) Effect of local metakaolin and waste sugarcane bagasse ash on mechanical properties and embodied carbon of sustainable concrete. Innovative Infrastructure Solutions, 10 (4). ISSN 23644176; 23644184

Khan, Iliyas Kareem and Daud, Hanita Binti and Zainuddin, Nooraini Binti and Sokkalingam, Rajalingam Al (2025) Standardizing reference data in gap statistic for selection optimal number of cluster in K-means algorithm. Alexandria Engineering Journal, 118. 246 - 260. ISSN 11100168

Khan, Muhammad Basit Ehsan and Houda, M. and Zada, Nawab Sameer and Imran, Muhammad and Benjeddou, Omrane (2025) Hybrid effect of basalt fibers and carbon fibers on concrete mechanical and environmental properties. Results in Engineering, 25. ISSN 25901230

Khan, Dodo and Jung, Low Tang and Dang, Vy Thai Bao and Brohi, Imtiaz Ali and Seelro, Moomal (2025) Applications and Security Challenges in Cyber-Physical Systems. Lecture Notes in Electrical Engineering, 1417 L. 551 - 565. ISSN 18761119; 18761100

Khan, Arfat Ahmad and Mahendran, Rakesh Kumar and Ullah, Fasee and Ali, Farman and Bashir, Ali Kashif and Al Dabel, Maryam Mohamed and Omar, Marwan (2025) AI-Driven Dynamic Allocation and Management Optimization for EV Charging Stations. IEEE Transactions on Intelligent Transportation Systems. ISSN 15580016; 15249050

Khan, Muhammad Basit Ehsan and Shafiq, Nasir and Khan, Abdul Mateen and Waqar, Ahsan and Zada, Nawab Sameer (2025) Enhancing Tensile Strength of Asphalt Concrete Through Rock Wool Inclusion. Lecture Notes in Civil Engineering, 556 LN. 73 - 80. ISSN 23662565; 23662557

L

Li, Xuefeng and Elsiddieg, Awatif M.A. and Alqahtani, Aisha M. and Ben Ammar, Mohamed and Alzahrani, Ali and Hussien, Mohamed and Mahamad, Saipunidzam (2025) Numerical and experimental evaluation of temperature field and melt flow in keyhole laser welding of dissimilar duplex stainless steel and nickel base alloy. International Journal of Thermal Sciences, 214. ISSN 12900729

Lee, Lok Hua and Ho, Cyrus Su Hui and Chan, Yee Ling and Tay, Gabrielle Wann Nii and Lu, Cheng-Kai and Tang, Tong Boon (2025) Antidepressant Treatment Response Prediction With Early Assessment of Functional Near-Infrared Spectroscopy and Micro-RNA. IEEE Journal of Translational Engineering in Health and Medicine, 13. 9 – 22. ISSN 21682372

Lou, Xujing and Zhang, Quan and Zou, Sikai and Wang, Jiaqiang and Ee, Yit Jing and Sopian, Kamaruzzaman (2025) Effectiveness Analysis of a Novel Hybrid Liquid Cooling System for Energy Storage Batteries. Lecture Notes in Electrical Engineering, 1426 L. 395 – 404. ISSN 18761100

Lim, Xinyi and Othman, Muhammad Bisyrul Hafi and Azmi, Mohamad Nurul and Adam, Mohd Ridhwan and Jaji, Nuru-Deen and Nosbi, Norlin (2025) Advanced sulfonated polyimide membrane technology: From synthesis to properties. Desalination and Water Treatment, 321. ISSN 19443994

Lu, Cheng-Kai and Shen, Jun-Yu and Lin, Cheng-Hung and Lien, Chung-Yueh and Yen, Ding Su (2025) Efficient Embedded System for Small Object Detection: A Case Study on Floating Debris in Environmental Monitoring. IEEE Embedded Systems Letters. ISSN 19430663

Lou, Xujing and Zhang, Quan and Ma, Zhenjun and Zhai, Zhiqiang and Yit, Jing Ee and Sopian, Kamaruzzaman Bin and Zhou, Hao and Meng, Xiangxi (2025) Field investigation on the performance of a novel hybrid cooling system for containerized energy storage batteries under mismatched conditions. Energy, 334. ISSN 03605442; 18736785

Loh, Jiacheng and Lock, Serene Sow Mun and Lee, Bobby Kwong Yii and Darban, Mehtab Ali and Kang, Dunyen Yen and Othman, Mohd Hafiz Dzarfan and Ban, Z. H. (2025) An atomistical elucidation of the 6FDA-durene-based mixed matrix membrane and ionic liquid mixed matrix membrane for CO2/CH4 separation. Results in Engineering, 27. ISSN 25901230

Lim, Chiah Chin and Choon, Ngohea and Hashim, Ummi Rabaah and Hasan, Mohd Hilmi Bin (2025) Surface-mount device design cycle time reduction using hybrid predictive modeling and optimization algorithm. Bulletin of Electrical Engineering and Informatics, 14 (4). 2889 - 2898. ISSN 23029285; 20893191

Li, Xuefeng and Elsiddieg, Awatif M.A. and Alqahtani, Aisha M. and Ben Ammar, Mohamed and Alzahrani, Ali Rashash R. and Hussien, Mohamed S.A. and Mahamad, Saipunidzam (2025) Numerical and experimental evaluation of temperature field and melt flow in keyhole laser welding of dissimilar duplex stainless steel and nickel base alloy. International Journal of Thermal Sciences, 214. ISSN 12900729

Luo, Jiabin and Song, Qinyu and Guo, Fusen and Wu, Haoyuan and Mat Som, Hafizan and Alahmari, Saad Ali and Noori Hoshyar, Azadeh Noori (2025) Joint deep reinforcement learning strategy in MEC for smart internet of vehicles edge computing networks. Sustainable Computing: Informatics and Systems, 46. ISSN 22105379

Lim, Jun Wei (2025) Turning Agricultural Waste into Useful Biochemicals and Biofuels Through Biochemical Engineering and Biotechnological Processing. Food Technology and Biotechnology, 63 (2). 122 - 123. ISSN 13309862; 13342606

Lembe, Bennedict Wat and Chek, Lai Choo and Agwu, Okorie Ekwe and Mailvaganam, Danesh and Jeng, Cyril Heng Hiang and Qiao, April Lo Chu (2025) Gas Turbine Optimization Using ANFIS and Deep Q-Learning Based on Gas Chromatography. Lecture Notes in Electrical Engineering, 1417 L. 159 - 174. ISSN 18761119; 18761100

Lim, Xinyi and Othman, Muhammad Bisyrul Hafi and Nurul Azmi, Mohamad Nurul and Adam, Mohd Ridhwan and Jaji, Nuru Deen and Nosbi, Norlin (2025) Advanced sulfonated polyimide membrane technology: From synthesis to properties. Desalination and Water Treatment, 321. ISSN 19443994; 19443986

Lee, Lokhua and Ho, Su Hui Cyrus and Chan, Yee Ling and Tay, Gabrielle Wann Nii and Lu, Chengkai and Tang, Tong Boon (2025) Antidepressant Treatment Response Prediction With Early Assessment of Functional Near-Infrared Spectroscopy and Micro-RNA. IEEE Journal of Translational Engineering in Health and Medicine, 13. 9 - 22. ISSN 21682372

M

Musa, Musa Nasiru and Jirgi, Ghazali Musa and Zango, Zakariyya Uba and Isah, Marnawi Nasiru and Abdurrazak, Muhammad and Adamu, Adamu Ahmad and Wadi, Ismael A. and Adeleke, Adekunle Akanni and Garba, Zaharaddeen N. and Bello, Usman and Adamu, Haruna and Hosseini-Bandegharaei, Ahmad and Bokov, Dmitry Olegovich (2025) A review on techno-economic assessment of Spirulina for sustainable nutraceutical, medicinal, environmental, and bioenergy applications. Bioresources and Bioprocessing, 12 (1). ISSN 21974365

Mokri, Nurul Afiqah and Oh, Pei Ching and Khalid, Mohammad (2025) 2D/2D Hybrids: Re-visiting interfacial synthesis and charge-carrier dynamics for photocatalysis. Results in Engineering, 26. ISSN 25901230

Muhammad, Abubakar Baffa and Mustaffa, Zahiraniza and Rosmawati, Niraku and Al-Atroush, Mohamed Ezzat (2025) Field Studies on the Application and Performance of Geothermal Energy Piles (GEP) in Buildings: An Overview. Lecture Notes in Civil Engineering, 556 LN. 196 – 203. ISSN 23662557

Mansour, Yasser and Subramaniam, Umashankar and Mustaffa, Zahiraniza and Abdelhadi, Abdelhakim and Al-Atroush, Mohamed and Abowardah, Eman (2025) Preface. Lecture Notes in Civil Engineering, 558 LN. v. ISSN 23662557

Muazu, Aminu Aminu and Hashim, Ahmad Sobri (2025) Enhancing Harmony Search Metaheuristic Algorithm for Coverage Efficiency, Test Suite Reduction, and Running Time in Combinatorial Interaction Testing. IEEE Access, 13. 110828 – 110852. ISSN 21693536

Mokri, Nurul Afiqah and Ching, Oh Pei and Leng, Chew Thiam and Nasir, Rizwan (2025) Nafion Layer-Enhanced Anatase TiO2 Nanoparticles for Photosynthetic CO2 Conversion. Lecture Notes in Civil Engineering, 556 LN. 254 – 261. ISSN 23662557

Mustaffa, Zahiraniza and Al-Qadami, Ebrahim Hamid Hussein and Topa, Ameen and Hamka, Nur Aqila Mohd and Budiman, Bentang Arief (2025) Numerical Study on the External Impact on Electric Vehicle (EV) Lithium-Ion Batteries. Lecture Notes in Civil Engineering, 558 LN. 1 – 8. ISSN 23662557

Mansour, Yasser and Subramaniam, Umashankar and Mustaffa, Zahiraniza and Abdelhadi, Abdelhakim and Ezzat, Mohamed and Abowardah, Eman (2025) Preface. Lecture Notes in Civil Engineering, 556 LN. ISSN 23662557

Mir, Aabid A. and Khalid, Ahmad S. and Musa, Shahrulniza and Fauzi, Mohammad Faizal Ahmad and Razak, Normy N. and Tang, Tong Boon (2025) Machine Learning in Ambient Assisted Living for Enhanced Elderly Healthcare: A Systematic Literature Review. IEEE Access. ISSN 21693536

Musa, Musa Nasiru and Jirgi, Ghazali Musa and Zango, Zakariyya Uba and Isah, Marnawi Nasiru and Abdurrazak, Muhammad and Adamu, Adamu Ahmad and Wadi, Ismael Abdalla and Adeleke, Adekunle Akanni and Garba, Zaharaddeen N. and Bello, Usman (2025) A review on techno-economic assessment of Spirulina for sustainable nutraceutical, medicinal, environmental, and bioenergy applications. Bioresources and Bioprocessing, 12 (1). ISSN 21974365

Mannafi, A. S.M. and Habib, Khairul and Asrafi, Taseen and Ali, Syed Awais (2025) Review on multi-functional performance analysis of MXene for thermoelectricity and electromagnetic interference shielding: challenges and future perspectives. Results in Engineering, 27. ISSN 25901230

Murali, Mugineysh and Alaloul, Wesam Salah and Al Salaheen, M. and Alzubi, Khalid M. and Musarat, Muhammad Ali (2025) Enhancing the Mechanical and Durability Properties of Self-Compacting Concrete Using Graphene Oxide-Coated Crumb Rubber. Iranian Journal of Science and Technology - Transactions of Civil Engineering, 49 (4). 3809 - 3828. ISSN 22286160

Musarat, Muhammad Ali and Khan, Abdul Mateen and Alaloul, Wesam Salah and Ayub, Saba and BÃ©renger, Monnerie (2025) Inspecting the benefits and challenges of virtual reality in construction projects of Malaysian industry. Innovative Infrastructure Solutions, 10 (8). ISSN 23644176; 23644184

Mogan, J. and Wan Harun, Wan Sharuzi and Samykano, M. A/l and Kadirgama, Kumaran Al and Alkahari, Mohd Rizal and Ramasamy, D. and Ahmad, Faiz (2025) Multiplane vs. Single-Plane FDM Printing: A Study on Mechanical and Physical Properties of the PET-G. Journal of Advanced Research in Applied Mechanics, 130 (1). 107 - 129. ISSN 22897895

Mokri, Nurul Afiqah and Oh, Peiching and Khalid, Mohammad (2025) 2D/2D Hybrids: Re-visiting interfacial synthesis and charge-carrier dynamics for photocatalysis. Results in Engineering, 26. ISSN 25901230

Mim, Mumtahina and Habib, Khairul and Farabi, Sazratul Nayeem and Zaed, Md Abu and Saidur, Rahman (2025) Investigation of the thermophysical properties of PCMs with novel ionic liquid assisted nanocomposite for sustainable thermal energy storage application. Case Studies in Thermal Engineering, 70. ISSN 2214157X

Min, Khoo Chee (2025) NUMERICAL INVESTIGATION ON THE EFFECTS OF TBM FACE SUPPORT PRESSURESâ��A PARAMETRIC STUDY. Jurnal Teknologi, 87 (2). 351 - 360. ISSN 21803722; 01279696

Mathew, Ajith and Poulose, Aiswarya and Peter, Anmiya and Mayookh Lal, Hiran and Uthaman, Arya and Mohamed Saheed, Mohamed Shuaib and Pasquini, Daniel and Grohens, Yves and Gopakumar, Deepu A. and George, Jinu Jacob (2025) Bio-inspired hydrophobicity in cellulose nanopaper via thermal-induced phase separation of beeswax: A new strategy to develop sustainable food packaging materials and its service life prediction. Food Packaging and Shelf Life, 48. ISSN 22142894

Mushtaha, Ahmed Wajeh H. and Alaloul, Wesam Salah and Baarimah, Abdullah O. and Musarat, Muhammad Ali and Alzubi, Khalid M. and Khan, Abdul Mateen (2025) A decision-making framework for prioritizing reconstruction projects in post-disaster recovery. Results in Engineering, 25. ISSN 25901230

Mohammed, Waleed Abdelrahman Yousif and Fattah, Salmah Binti and Saeed, Khalid Mohammed Osman and Ibrahim, Ashraf Osman and Eltahier, Safaa (2025) Enhancing the RC4 Algorithm by Eliminating the Initiative Vector (IV) Transmission. Engineering, Technology and Applied Science Research, 15 (1). 20242 - 20248. ISSN 22414487; 17928036

Mutafi, Ayad and Irwan, J. M. and Yidris, N. and Alshalif, Abdullah Faisal and Saif, Yazid Abdullsameea Mohammed and Abdulrahman, H. and Mutaafi, Ala and Al-Ashmori, Yasser Yahya and Amran, Mugahed Yahya Hussein and Maureira-Carsalade, N. (2025) Residual stresses in cold-formed steel sections: An overview of influences and measurement techniques. Forces in Mechanics, 18. ISSN 26663597

Mokri, Nurul Afiqah and Oh, Peiching and Leng, Chew Thiam and Nasir, R. (2025) Nafion Layer-Enhanced Anatase TiO2 Nanoparticles for Photosynthetic CO2 Conversion. Lecture Notes in Civil Engineering, 556 LN. 254 - 261. ISSN 23662565; 23662557

Mangi, Rizwan Aziz and Abro, Ghulam E.Mustafa and Memon, Sufyan Ali and Pathan, Aneela and Zuhaib, Khalil Muhammad and Marimuthu, Maran (2025) FOPID-Controlled Self-Propelled Pipeline Inspection Robot for Internal Mapping of Small-Diameter Pipelines. IEEE Access, 13. 137931 - 137941. ISSN 21693536

Maheshwari, Vikash Chander and Kumar, Ganesh M. and Osman, Nurul Aida Bt and Singh, Ranjit and Imam, Abdullahi Abubakar and Hoong, Angela Lee Siew and El Hajjami, Salma (2025) Dynamic Fraud Detection in E-banking: A Case Study on Ethereum Networks Using Machine Learning Enhanced by Blockchain. Lecture Notes in Electrical Engineering, 1417 L. 653 - 668. ISSN 18761119; 18761100

Mahendran, Khavinassh and Yew, Kwang Hooi (2025) English-Malay FAQ Chatbot System Using NLP. Lecture Notes in Electrical Engineering, 1417 L. 379 - 389. ISSN 18761119; 18761100

Mansour, Yasser and Subramaniam, Umashankar and Mustaffa, Z. Binti and Abdelhadi, Abdelhakim N. and Al-Atroush, Ezzat M. and Abowardah, Eman S. (2025) Preface. Lecture Notes in Civil Engineering, 558 LN. v. ISSN 23662565; 23662557

Mazli, Wan Nur Athirah and Osman, Wan Nur Aisyah and Samsuri, Shafirah Binti and Bello, Usman and Espitalier, Fabienne (2025) Effect of cooling rate on metastable zone width of glycerol derived from sunflower oil and compressed oil. Chemical Papers. ISSN 03666352

Mir, Aabid A. and Khalid, Ahmad Shahrafidz and Musa, Shahrulniza Niza and Faizal Ahmad Fauzi, Mohammad and Abdul Razak, Normy Norfiza and Tang, Tong Boon (2025) Machine Learning in Ambient Assisted Living for Enhanced Elderly Healthcare: A Systematic Literature Review. IEEE Access, 13. 110508 - 110527. ISSN 21693536

N

Nallakukkala, Sirisha and Tackie-Otoo, Bennet Nii and Aliyu, Ruwaida and Lal, Bhajan and Nallakukkala, Jagadish Ram Deepak and Devi, Gayathri (2025) Application of machine learning algorithms to predict removal efficiency in treating produced water via gas hydrate-based desalination. Desalination, 612. ISSN 00119164

Najm, Mustafa Mohammed and Najm, Sarah Mohammed and Hmood, Jassim K. and Yit, Jing Ee and Al-Azzawi, Alabbas A. and Abdullah, Mohammed Najm and Harun, S.W. (2025) Effect of output coupling ratio on performance of Q-switched fiber laser based on MgQ2 organic saturable absorber. Optical Fiber Technology, 93. ISSN 10685200

Nasser, Maged and Saeed, Faisal and Da'u, Aminu and Alblwi, Abdulaziz and Al-Sarem, Mohammed (2025) Topic-aware neural attention network for malicious social media spam detection. Alexandria Engineering Journal, 111. 540 – 554. ISSN 11100168

Nallakukkala, Sirisha and Tackie-Otoo, Bennet Nii and Aliyu, Ruwaida and Lal, Bhajan and Nallakukkala, Jagadish Ram Deepak and Devi, G. Gayathri (2025) Application of machine learning algorithms to predict removal efficiency in treating produced water via gas hydrate-based desalination. Desalination, 612. ISSN 00119164

Najm, Mustafa Mohammed and Najm, Sarah Mohammed and Hmood, Jassim K. and Yit, Jing Ee and Al-Azzawi, Alabbas A. and Abdullah, Mohammed Najm and Harun, Sulaiman Wadi (2025) Effect of output coupling ratio on performance of Q-switched fiber laser based on MgQ2 organic saturable absorber. Optical Fiber Technology, 93. ISSN 10685200

Ng, Jingsheng and Muhammad, Syahidah Akmal and Ibrahim, Baharudin Bin and Rafatullah, Mohd and Strashnov, Ilya and Yong, Chinhong and Hossain, Sohrab and Abu-Bakar, Noor Hana Hanif and Kelly, Simon Douglas and Cannavan, Andrew (2025) Fatty Acid Diagnostic Ratios to Screen for Used Oil Adulteration in Refined, Bleached, Deodorised Palm Oil. Food Analytical Methods, 18 (8). 1685 - 1698. ISSN 1936976X; 19369751

Narendiran, Dharrinesh and Sumadi, Nurul Hazirah and Ghumman, Ali Shaan Manzoor and Mohamad, Noor Ashikin and Nasef, Mohamed Mahmoud and Abbasi, Amin and Shamsuddin, Rashid (2025) A New Sulfur-Containing Copolymer Created Through the Thermally Induced Radical Copolymerization of Elemental Sulfur with N2,N2-Diallylmelamine Comonomer for Potential CO2 Capture. Journal of Composites Science, 9 (7). ISSN 2504477X

Neogi, Prodeepta and Rahman, Md Tauhidur and Habib, Khairul and Sakib, Md Sayeedur Rahman and Islam, Fardin and Anjum, Khandakar Fahim and Hossain, Sm Shakhawat and Rahman, Mdâ�¤Aliur A. (2025) A computational fluid dynamics (CFD) study on extraction of geothermal energy in Bangladesh. Results in Engineering, 26. ISSN 25901230

Nasser, Maged and Arshad, Noreen Izza Bt and Ali, Abdulalem and Alhassan Alhussian, Hitham Seddig and Saeed, Faisal Abdulkarem and Da'u, Aminu and Nafea, Ibtehal Talal (2025) A systematic review of multimodal fake news detection on social media using deep learning models. Results in Engineering, 26. ISSN 25901230

Numin, Mohd Sofi and Jumbri, Khairulazhar Bin and Kee, K. E. and Hassan, Almila and Borhan, Noorazlenawati Bt and Daud, Nik Mohd Radi Mohamed and A, Azmi M.Nor and Suhor, Muhammad Firdaus and Dzulkifli, Nur Nadia (2025) Effect of Alkyl Chain Length of Quaternary Ammonium Surfactant Corrosion Inhibitor on Fe (110) in Acetic Acid Media via Computer Simulation. ChemEngineering, 9 (1). ISSN 23057084

Nuthalapati, Suresh and Kee, K. E. and Che Ismail, Mokhtar B. and Karuppanan, Saravanan and Hossain, Touhid Mohammad (2025) Detection and characterization of chloride induced stress corrosion cracking on SS304 under thermal insulation using acoustic emission technique. Engineering Failure Analysis, 168. ISSN 13506307

Nabila, Fahmida Habib and Islam, Rashedul and Yamin, Li and Kawaguchi, Yoshirou and Wakabayashi, Rie and Kamiya, N. and Moniruzzaman, Muhammad and Goto, Masahiro (2025) Transdermal Insulin Delivery Using Ionic Liquid-Mediated Nanovesicles for Diabetes Treatment. ACS Biomaterials Science and Engineering, 11 (1). 402 - 414. ISSN 23739878

Nugraha, Muhammad Wahyu and Hui, Khee Chung and Harun, Noorfidza Yub and Floresyona, Dita and Nugroho, Agung and Ahmad Kamal, Norashikin and Soraya Sambudi, Nonni Soraya (2025) Photoconversion of Carbon Dioxide to Methanol Using Doped-Carbon Quantum Dots/TiO2. Materials Science Forum, 1153. 105 - 115. ISSN 02555476; 16629752

O

Oyebamiji, Damilare Samuel and Chandran, Davannendran and Raviadaran, Revathi (2025) Advancements in electrochemical energy storage: A review of biomass-derived separator, binder and electrolyte for electric vehicle battery. Results in Engineering, 27. ISSN 25901230

Oladosu, Temidayo Lekan and Pasupuleti, Jagadeesh and Tiong, Sieh Kiong and Koh, S.P. and Yaw, Chong Tak and Chee, Mei Ling (2025) Magnetic field-enhanced electrodialysis regeneration of deep eutectic solvent as a greener desiccant for air dehumidification. Journal of Building Engineering, 104. ISSN 23527102

Oladosu, Temidayo Lekan and Pasupuleti, Jagadeesh and Tiong, Sieh Kiong and Paw, Johnny Koh Siaw and Yaw, Chong Tak and Chee, Mei Ling (2025) Magnetic field-enhanced electrodialysis regeneration of deep eutectic solvent as a greener desiccant for air dehumidification. Journal of Building Engineering, 104. ISSN 23527102

Othman, Abdullah Musleh Ahmed and Ahmad, Nur Azliza and Ripin, Nabilah and Saadon, Eddy Irwan Shah and Ismail, Muhammad Faizal and Rahman, Nurul Huda Abd and Subahir, Suhaila Binti and Ramli, Nurulazlina Bt (2025) Exploring the Opportunities of Applying RFID Technology in Smart Agriculture. Journal of Advanced Research in Applied Mechanics, 127 (1). 144 - 154. ISSN 22897895

Ola, Victor Damilare and Eissa Mohyaldinn, Mysara Eissa and Olugbade, Temitope Olumide and Amadi, Azubuike Hope (2025) Corrosion in Amine Gas Capturing Facilities: Processes, Challenges, and Mitigations â�� a Review. Process Integration and Optimization for Sustainability, 9 (1). 3 - 30. ISSN 25094246; 25094238

P

Puspitasari, Dewi and Ganda, Andita Nataria Fitri and Sakti, A. M. and Abdi, Ferly Isnomo and Warju, null and Puspitasari, Poppy and Mustapha, Mazli B. and Wirawan, Willy Artha (2025) ENHANCING MECHANICAL PROPERTIES OF ALUMINUM FOAM THROUGH OPTIMIZED ARTIFICIAL AGING: TEMPERATURE AND TIME EFFECTS. EUREKA, Physics and Engineering, 2025 (4). 213 - 228. ISSN 24614262; 24614254

Patrick, Harold Andrew and Gujjar, J. Praveen and Guru Prasad, M. S. and Kumar, Rishi and Naveen Kumar, H. N. (2025) Issues and Challenges in Emerging Cyber Forensics and Traditional Cyber Forensics Methods. 90 - 102.

R

Raza, Hassan and Ullah, Sana and Akhtar, Awais and Gohar, Ghulam Abbas and Bello, Idris Temitope and Raza, Ali and Ahmed, Arslan (2025) Enhancing lithium-sulfur battery performance through the integration of six-metal high entropy oxides. Materials Letters, 393. ISSN 0167577X

Raza, Aaqib and Yusoff, Mohd Zuki (2025) Development of a CNN-LSTM Deep Learning Model for Motor Imagery EEG Classification for BCI Applications. Engineering, Technology and Applied Science Research, 15 (3). 22705 – 22711. ISSN 22414487

Radhi, Firas Abdulamir and Ibrahim, Adnan and Azeez, Hariam Luqman and Fazlizan, Ahmad and Sopian, Kamaruzzaman and Ali, Ahmed Ameen and Al-Aasam, Anwer Basim (2025) Experimental analysis of a photovoltaic thermal collector utilizing a novel spring insert in a micro-fin absorber tube with twisted tape, nanofluid, and nanophase change material integration. Applied Thermal Engineering, 269. ISSN 13594311

Ravichandran, Kishantinee and Husin, Hazlina and Sulaiman, Shaharin Anwar (2025) The effect of gas void on restart pressure of waxy crude oil in pipeline. Results in Engineering, 26. ISSN 25901230

Rajapakse, Hansika and Raviadaran, Revathi and Chandran, Davannendran (2025) Deep eutectic solvents for pretreatment of lignocellulosic biomass: Towards circular bioeconomy. Results in Engineering, 26. ISSN 25901230

Roslan, Nur Syahirah and Faye, Ibrahima and Amin, Hafeez Ullah and Latif, Muhamad Hafiz Abd (2025) Enhancing Extraversion Classification With Sample Entropy: A Comparison of Two EEG Epoch Lengths. IEEE Sensors Letters, 9 (5). ISSN 24751472

Rashid, Maaeda M. and Osman, Mohd Hafeez and Sharif, Khaironi Yatim and Zulzalil, Hazura (2025) Interpretable Deep Learning for Efficient Code Smell Prioritization in Software Development. IEEE Access, 13. 45290 – 45311. ISSN 21693536

Rahman, Sunarti Abd and Ndia Ntone, Ellora Priscille and Alagu, Divyameena and Rajeswaran, Dharshini Deepa and Shoparwe, Noor Fazliani and Mun, Serene Lock Sow and Lee, Yeu Yee (2025) A comparison study on hydrophobic and hydrophilic-mixed matrix membranes for diethanolamine removal. Materials Research Innovations, 29 (4). 262 – 268. ISSN 14328917

Radhi, Firas Abdulamir and Ibrahim, Adnan and Azeez, Hariam Luqman and Fazlizan, Ahmad and Sopian, Kamaruzzaman Bin and Ali, Ahmed Ameen and Al-Aasam, Anwer B. (2025) Experimental analysis of a photovoltaic thermal collector utilizing a novel spring insert in a micro-fin absorber tube with twisted tape, nanofluid, and nanophase change material integration. Applied Thermal Engineering, 269. ISSN 13594311

Rasul, Adnan and Karuppanan, Saravanan and Veeradasan, P. and Ovinis, Mark and Iqbal, Muhammad Zohair and Badshah, Saeed and Alam, Khurshid (2025) Stress Concentration Factors in Tubular T-Joint Braces Under Compressive Loads Using Artificial Neural Networks. Civil Engineering Journal (Iran), 11 (6). 2385 - 2398. ISSN 26766957; 24763055

Rahmawati, Ratri and Puspita, Gita Anggia and Mohd Laziz, Afiq and Wibisono, Y. and Gapsari, Femiana and Widodo, Teguh Dwi and Bilad, Muhammad Roil (2025) Enhancing the efficiency of air bubbles using a finned panel spacer for membrane fouling control in activated sludge filtration. Results in Engineering, 26. ISSN 25901230

Ravichandran, Kishantinee and Husin, Hazlina Binti and Sulaiman, Shaharin Anwar B. (2025) The effect of gas void on restart pressure of waxy crude oil in pipeline. Results in Engineering, 26. ISSN 25901230

Rahman, Nurul Aliaa Abdul and Yussof, Wan Mohd Hafizuddin Wan and Samsudin, A. S. and Bustam, Mohamad Azmi and A Rahman, Roshanida Abdul and Idris, Alamin (2025) Optimized recovery of ferulic acid using morpholinium-based ionic liquid: electrical conduction effects and process efficiency. Ionics, 31 (6). 6461 - 6473. ISSN 09477047; 18620760

Raza, Ali and Ahmad, Faiz and Othman, Abdul Rahim and Badri, Thar Mohammed and Raza, Muhammad Rafi (2025) Oxidation behaviour of HVOF sprayed aluminaâ��zirconia blended aluminum coating on 316L SS under high temperature environment. Materials Letters, 382. ISSN 18734979; 0167577X

Raksasat, Ratchaprapa and Ramanathan, Shankar and Rawindran, Hemamalini and Liew, Chin Seng (2025) Investigating Ecological Friendly Advancements in Wastewater Treatment for Sustainable Solutions. 45 - 63.

Remesh, Sivainesh Devi and Chelvaraj, Jeysree and Veeradasan, P. and Gopinath, Subash C.B. and Ovinis, Mark and Karupannan, Saravanan and Arumugam, Natarajan and Kumar, Raju Suresh (2025) Mn3O4 Tetrahedral with Carbonyldiimidazole Nanoflower Deposition on Laser-Scribed Graphene for Selective Bio-Capture. Biotechnology and Applied Biochemistry. ISSN 08854513; 14708744

Rostami, Shirin and Ibrahim, Adnan and Ishak, Muhammad Amir Aziat Bin and Fazlizan, Ahmad and Fudholi, Ahmad and Sopian, Kamaruzzaman Bin and Dehghani-Sanij, A. R. and Shahsavar, Amin and Al-Aribe, Khaled M. (2025) Experimental and numerical assessment of water-based photovoltaic/thermal collectors with varied tubular absorber cross-sections. Case Studies in Thermal Engineering, 65. ISSN 2214157X

Rajhi, W. and Arshad, Noreen Izza Bt and KraÃ¯em, Naoufel and Mir, Ahmed and Lioua, Kolsi and Milyani, Ahmad H. and Ajour, Mohammed Nasser and Alhumade, Hesham Abdulhamed and Karimipour, Aliakbar (2025) Reducing peak thermo-electricity energy demand in building: Insights from sensible and latent storage â�� Applicable in hot and arid regions. Case Studies in Thermal Engineering, 65. ISSN 2214157X

Raza, Aaqib and Yusoff, Mohd Zuki (2025) An Adaptive Convolutional Neural Network With Spatio-Temporal Attention and Dynamic Pathways (ACNN-STADP) for Robust EEG-Based Motor Imagery Classification. IEEE Access, 13. 106387 - 106405. ISSN 21693536

S

Shivangi and Singh, Priyanka and Mohammed, Bashar S. (2025) Optimizing Coated PZT Sensors for Structural Health Monitoring in Hybrid Fibre-Reinforced Concrete Beams. Iranian Journal of Science and Technology - Transactions of Civil Engineering. ISSN 22286160

Sarwar, Umair and Mokhtar, Ainul Akmar and Muhammad, Masdi and Kaka, Shuaib and Behrani, Paras and Khan, Darya (2025) Finite Element Modelling of Mechano-electrochemical Effect of High Strength Steel Pipeline Corrosion. Journal of Advanced Research in Micro and Nano Engineering, 35 (1). 59 – 70. ISSN 27568210

Soomro, Hassan Ali and Khir, Mohd Haris Bin Md and Zulkifli, Saiful Azrin B M and Abro, Ghulam E Mustafa and Abualnaeem, Mohammad Madhat (2025) Applications of wide bandgap semiconductors in electric traction drives: Current trends and future perspectives. Results in Engineering, 26. ISSN 25901230

Saeed, M Atif and Junejo, Faraz and Yahaya, Nor Zaihar and Meraj, Sheikh Tanzim and Amin, Imran and Mumtaz, Farhan (2025) Sustainable 90-degree slot milling of AZ31 alloy via two-stage hybrid optimization. International Journal of Advanced Manufacturing Technology, 138 (11). 5357 – 5385. ISSN 02683768

See, Wei Y. and Socheatra, Soeung and Cheab, Sovuthy (2025) 3D PRINTED WAVEGUIDE FILTER BASED ON SUPER-ELLIPTICAL SHAPE. Journal of Engineering Science and Technology, 20 (3). 640 – 653. ISSN 18234690

Surmi, Amiza and Shariff, Azmi Mohd and Lock, Serene Sow Mun (2025) Techno-economic assessment of cryogenic Rotating Packed Beds for nitrogen removal from natural gas. Results in Engineering, 26. ISSN 25901230

Sumiea, Ebrahim Hamid and Abdulkadir, Said Jadid and Alhussian, Hitham Seddig and Al-Selwi, Safwan Mahmood and Alqushaibi, Alawi and Ragab, Mohammed Gamal and Fayyaz, Abdul Muiz (2025) Deep deterministic policy gradient - model-agnostic meta-learning framework: Efficient adaptation in continuous control tasks. Results in Engineering, 26. ISSN 25901230

Saidu, Yahaya and Shuhidan, Shuhaida Mohamed and Aliyu, Dahiru Adamu and Abdul Aziz, Izzatdin and Adamu, Shamsuddeen (2025) Convergence of Blockchain, IoT, and AI for Enhanced Traceability Systems: A Comprehensive Review. IEEE Access, 13. 16838 – 16865. ISSN 21693536

Soomro, Mehrullah and Hassan, Mohd Khair and Mustafa Abro, Ghulam E. and Marimuthu, Maran (2025) Electronic Wedge Brakes: A Review of Design, Modeling, Control Strategies, and Testing Methodologies. IEEE Access, 13. 67378 – 67399. ISSN 21693536

Saleh, Basma Jumaa and Omar, Zaid and As’ari, Muhammad Amir and Bhateja, Vikrant and Izhar, Lila Iznita (2025) A Novel Hybrid Deep Learning Model Based on Simulated Annealing and Cuckoo Search Algorithms for Automatic Radiomics-Based COVID-19 Diagnosis. Applied Computational Intelligence and Soft Computing, 2025 (1). ISSN 16879724

Saidu, Yahaya and Shuhidan, Shuhaida Mohamed and Aziz, Izzatdin Abdul and Alam, Md Mahmudul and Aliyu, Dahiru Adamu and Yakubu, Muhammad M. and Adamu, Shamsuddeen (2025) Exploring Blockchain–IoT Convergence for Logistics Traceability: A Systematic Review and Future Outlook. IEEE Access. ISSN 21693536

Saat, S. and Sakhtivel, R. and Hussin, F.A. and Sedek, M. (2025) Robust H∞ output feedback control for polynomial discrete-time systems. Journal of the Franklin Institute, 362 (1). ISSN 00160032

Sattar, Mohsin and Othman, A.R. and Hosek, Jan and Saleh, Bahaa and Ali, Hafiz T. and Hasnain, Sohail and Khan, Kashif (2025) Sensitivity analysis of steel hole plate by utilizing computational methods and newly developed creep model. Materials at High Temperatures, 42 (1). 51 – 67. ISSN 09603409

Sun, Penglu and Tayeh, Bassam A. and Alaloul, Wesam Salah and Abu Aisheh, Yazan Issa and Frijah, Marwan M. (2025) The role of client in fostering construction safety during the planning and design stages. Journal of Asian Architecture and Building Engineering, 24 (3). 1659 – 1671. ISSN 13467581

Shamshad, Hasib and Ullah, Fasee and Shah, Syed Adeel Ali and Faheem, Muhammad and Shamshad, Beena (2025) OPTICALS: A Novel Framework for Optimizing Predictive Trading Indicators in Cryptocurrency Using Advanced Learning Simulations. IEEE Access, 13. 61078 – 61090. ISSN 21693536

Sudiana, Dodi and Rizkinia, Mia and Arief, Rahmat and De Arifani, Tiara and Lestari, Anugrah Indah and Kushardono, Dony and Prabuwono, Anton Satria and Sumantyo, Josaphat Tetuko Sri (2025) A CNN-RF Hybrid Approach for Rice Paddy Fields Mapping in Indramayu Using Sentinel-1 and Sentinel-2 Data. IEEE Access, 13. 23234 – 23246. ISSN 21693536

Shams, Muhammad Alamgeer and Bheel, Naraindas and Abid, Malik Muneeb and Alraeeini, Ahmed Saleh and Almaliki, Abdulrazak Homidi and Dodo, Yakubu Aminu and Benjeddou, Omrane (2025) Exploring Fracture Energy in Engineered Cementitious Composites: A Comprehensive Review. International Journal of Concrete Structures and Materials, 19 (1). ISSN 22341315; 19760485

Shahid, Muhammad Zubair and Zabiri, Haslinda Bt and Taqvi, Syed Ali Ammar (2025) An embedded KPI-based advisory framework for monitoring and diagnosis of soft sensor degradation. Results in Engineering, 27. ISSN 25901230

Sultan, Sakhr M. and Tso, Chih Ping and Abdullah, Mohd Zulkifly and Sopian, Kamaruzzaman Bin (2025) A new performance assessment method for photovoltaic module enhancing techniques based on power and cost effectiveness factor. Results in Engineering, 27. ISSN 25901230

Sarwar, Umair and Mokhtar, Ainul Akmar Binti and Muhammad, Masdi Bin and Kaka, Shuaib and Behrani, Paras and Khan, Darya (2025) Finite Element Modelling of Mechano-electrochemical Effect of High Strength Steel Pipeline Corrosion. Journal of Advanced Research in Micro and Nano Engineering, 35 (1). 59 - 70. ISSN 27568210

Sinha, Ayush and Rajak, Dipen Kumar and Shaik, Nagoor Basha and Mohapatra, Ranjan K. and Saxena, Kuldeep Kr and Singh, Rajesh and Xu, Jinyang and Behera, A. (2025) A review on 4D printing of Nickel-Titanium smart alloy processing, the effect of major parameters and their biomedical applications. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 239 (4). 1616 - 1625. ISSN 09544089; 20413009

Susanto, Misfa and Gumilang, Alisha Gita and Fitriawan, Helmy and Aziz, Azrina Abd (2025) Interference management based on clustering in RIS-aided ultra dense network under multicell scenario. Bulletin of Electrical Engineering and Informatics, 14 (4). 2662 - 2673. ISSN 23029285; 20893191

Sani, Adamu Abubakar and Wahab, M. M.A. and Shafiq, Nasir and Usman Danyaro, Kamaluddeen and Khan, Nasir and Tafida, Adamu Ibrahim and Khan Yousafzai, Arsalaan (2025) A multi-level classification model for corrosion defects in oil and gas pipelines using meta-learner ensemble (MLE) techniques. Journal of Pipeline Science and Engineering, 5 (2). ISSN 26671433

Saeed, Atif and Junejo, Faraz and Yahaya, Nor Zaihar Bin and Meraj, Sheikh Tanzim and Amin, Imran and Mumtaz, Farhan (2025) Sustainable 90-degree slot milling of AZ31 alloy via two-stage hybrid optimization. International Journal of Advanced Manufacturing Technology, 138 (11). 5357 - 5385. ISSN 14333015; 02683768

Sumiea, Ebrahim Hamid Hasan and Kadir, Said Jadid A. and Alhassan Alhussian, Hitham Seddig and Al-Selwi, Safwan Mahmood and Alqushaibi, Alawi and Ragab, Mohammed Gamal and Fayyaz, Abdul Muiz (2025) Deep deterministic policy gradient - model-agnostic meta-learning framework: Efficient adaptation in continuous control tasks. Results in Engineering, 26. ISSN 25901230

Surmi, Amiza and Mohd Shariff, Azmi Mohd and Lock, Serene Sow Mun (2025) Techno-economic assessment of cryogenic Rotating Packed Beds for nitrogen removal from natural gas. Results in Engineering, 26. ISSN 25901230

Soomro, Hassan Ali and Md Khir, Masrur Haris and Zulkifli, Saiful A. and Abro, Ghulam E.Mustafa and Abualnaeem, Mohammed Madhat (2025) Applications of wide bandgap semiconductors in electric traction drives: Current trends and future perspectives. Results in Engineering, 26. ISSN 25901230

Soomro, Hira and Zainuddin, Nooraini Binti and Mohd Nasir, Nor Ain Azeany and Daud, Hanita Binti and Jusoh, Rahimah and Yatim, S. A.M. and Zawawi, Iskandar Shah Mohd (2025) Application of the Shooting Method in 2-Point Block BDF for Nonlinear Boundary Value Problems. Engineering Letters, 33 (5). 1405 - 1410. ISSN 18160948; 1816093X

Sunder, Naveen and Fong Yeong, Yin and Mun, Serene Lock Sow (2025) Preliminary Study on Syngas Production from a CO2 and CH4 Mixture via Non-Thermal Dielectric Barrier Discharge Plasma Incorporated with Metalâ��Organic Frameworks. Journal of Composites Science, 9 (4). ISSN 2504477X

Shafiq, Mian Umer and Jamil, Maryam and Khan, Momna and Wang, Lei and Ben Mahmud, Hisham Khaled and Mujahid, Talha (2025) Fundamentals and applications of geopolymers. 256 - 274.

Shahbaz, Muhammad and Ammar, Muhammad Afiq and Sukarni, Sukarni (2025) Conversion of Spirulina platensis into methanol via gasification: Process simulation modeling and economic evaluation. Digital Chemical Engineering, 14. ISSN 27725081

Saafie, Nabilah and Sufian, Suriati Binti and Mufti, Nandang and Samsudin, Mohamad Fakhrul Ridhwan (2025) The role of g-C3N4 loadings in MXene for photocatalytic degradation of methylene blue. Journal of Materials Science: Materials in Electronics, 36 (6). ISSN 09574522; 1573482X

Shah, Syed Zulfiqar Hussain and Lee, Juhyeong and Altaf, Khurram and Mohammad, Mazian and Hussain, M. Z. and Choudhry, Rizwan Saeed (2025) Quasi-static indentation characteristics of foam-filled sandwich composite structures with additively manufactured CFRP and GFRP corrugated cores. Journal of Sandwich Structures and Materials, 27 (2). 505 - 529. ISSN 10996362; 15307972

Shabbir, Hassan and Fahad, Hafiz Muhammad and Sharif, Rehana and Butt, Annam and Fatima, Sehar and Shaheen, Fozia and Rajan, Jose and Wahab, Rizwan and Veeradasan, P. and Akbar, Samina (2025) Synergistic effect of 3D porous tri-metallic MOF based electrode materials for highly stable asymmetric supercapacitors. Materials Science in Semiconductor Processing, 186. ISSN 13698001

Soomro, Imtiaz Ali and Hassan, Adeel and Aftab, Umair and Zhao, Lun and Arshad, Ali and Shahid, Bilal (2025) Investigation of stress corrosion cracking behavior of friction stir welded thick al 6061-t6 alloy plate. Welding in the World, Le Soudage Dans Le Monde, 69 (2). 299 - 309. ISSN 00432288

Shafian, Shafidah and Mohd Salehin, Fitri Norizatie and Lee, Sojeong and Ismail, Azlan B. and Mohamed Shuhidan, Shuhaida M. and Xie, Lin and Kim, Kyungkon (2025) Development of Organic Semiconductor Materials for Organic Solar Cells via the Integration of Computational Quantum Chemistry and AI-Powered Machine Learning. ACS Applied Energy Materials, 8 (2). 699 - 722. ISSN 25740962

Suresh, Deepa and Goh, P. S. and Lau, W. J. and Lim, Jun Wei and Abdullah, Mohd Sohaimi and Ng, B. C. and A.F., Ismail Fauzi Bin (2025) The synergistic actions of copper/L-glutamine co-grafting in improving anti-biofouling and desalination performances of reverse osmosis thin film composite membrane. Desalination, 593. ISSN 00119164

Sandunil, Kushan and Bennour, Ziad and Sivakumar, Saaveethya and Mahmud, Hisham Ben and Giwelli, Ausama A. (2025) Application of Recently Developed Boosting Ensemble Machine Learning Algorithms in Carbon Capture and Storage Feasibility Assessment to Predict Subsurface Porosity. Lecture Notes in Mechanical Engineering. 185 - 193. ISSN 21954364; 21954356

Saat, Shakir Md D. and Sakhtivel, R. and Hussin, Fawnizu Azmadi and Sedek, Muliati (2025) Robust Hâ�� output feedback control for polynomial discrete-time systems. Journal of the Franklin Institute, 362 (1). ISSN 00160032

Sari, Dewi Sri Permata and Salim, A. A. and Chamidah, Nurul Lathii Fatul and Yuliana, Erma Surya and Taufiq, Ahmad R. and Pujiarti, Herlin and Sufian, Suriati Binti and Mufti, Nandang (2025) Performance enhancement of silicon heterojunction solar cells using ethylene glycol-doped PEDOT:PSS/SWCNT interlayers. Journal of Materials Science. ISSN 15734803; 00222461

Saidu, Yahaya and Mohamed Shuhidan, Shuhaida and Abdul Aziz, Izzatdin and Alam, Md Mahmudul and Adamu Aliyu, Dahiru and Muntasir Yakubu, Muhammad and Adamu, Shamsuddeen (2025) Exploring Blockchain-IoT Convergence for Logistics Traceability: A Systematic Review and Future Outlook. IEEE Access, 13. 112390 - 112416. ISSN 21693536

Shah, Syed Adil Hussain and Shah, Syed Taimoor Hussain and Fayyaz, Abdul Muiz and Shah, Syed Baqir Hussain and Yasmin, Mussarat and Raza, M. and Di Terlizzi, Angelo and Deriu, Marco Agostino (2025) Improving Biomedical Image Pattern Identification by Deep B4-GraftingNet: Application to Pneumonia Detection. IET Image Processing, 19 (1). ISSN 17519659; 17519667

Sattar, Mohsin and Othman, Abdul Rahim and HoÅ¡ek, Jan and Saleh, B. Y. and Ali, Hafiz T. and Hasnain, Sohail and Khan, Kashif (2025) Sensitivity analysis of steel hole plate by utilizing computational methods and newly developed creep model. Materials at High Temperatures, 42 (1). 51 - 67. ISSN 09603409

Sudiana, Dodi and Rizkinia, Mia and Arief, Rahmat and de Arifani, Tiara and Lestari, Anugrah Indah and Kushardono, Dony and Prabuwono, Anton Satria and Sri Sumantyo, Josaphat Tetuko (2025) A CNN-RF Hybrid Approach for Rice Paddy Fields Mapping in Indramayu Using Sentinel-1 and Sentinel-2 Data. IEEE Access, 13. 23234 - 23246. ISSN 21693536

Soomro, Toufique Ahmed and Ali, Ahmed and Faye, Ibrahima and Ali, Kamran Ali and Alothman, Abdullah and Al Mahmud, Rabiul and Muda, Ahmad Sobri and Qureshi, Khurram Karim (2025) Improving Stroke Diagnosis and Treatment With Deep Learning: A Review. IEEE Sensors Journal, 25 (16). 30275 - 30290. ISSN 1530437X

T

Talpur, Shabbir Ali and Thansirichaisree, Phromphat and Anotaipaiboon, Weerachai and Mohamad, Hisham and Zhou, Mingliang and Ejaz, Ali and Hussain, Qudeer and Saingam, Panumas and Chaimahawan, Preeda (2025) Data-driven prediction of failure loads in low-cost FRP-confined reinforced concrete beams. Composites Part C: Open Access, 17. ISSN 26666820

Taj-Liad, Soliah Temilade and Raviadaran, Revathi and Chandran, Davannendran and Lam, Man Kee (2025) Cell disruption and extraction for microalgae biorefinery: Focus on deep eutectic solvents moving towards aqueous biphasic system. Results in Engineering, 26. ISSN 25901230

Tafa, Taofik O. and Hashim, Siti Zaiton Mohd and Othman, Mohd Shahizan and Alhussian, Hitham and Nasser, Maged and Abdulkadir, Said Jadid and Huspi, Sharin Hazlin and Adeyemo, Sarafa O. and Bena, Yunusa Adamu (2025) Machine Translation Performance for Low-Resource Languages: A Systematic Literature Review. IEEE Access, 13. 72486 – 72505. ISSN 21693536

Thansirichaisree, Phromphat and Ejaz, Ali and Saingam, Panumas and Mohamad, H. Bin and Hussain, Qudeer and Chaimahawan, Preeda and Bhadrakom, Bhakapong and Buddhawanna, Saharat (2025) Green reinforcement techniques: Using natural hemp and cotton ropes to enhance the structural integrity of short-span RC beams. Journal of Infrastructure Intelligence and Resilience, 4 (3). ISSN 27729915

Talpur, Shabbir Ali and Thansirichaisree, Phromphat and Anotaipaiboon, Weerachai and Mohamad, H. Bin and Zhou, Mingliang and Ejaz, Ali and Hussain, Qudeer and Saingam, Panumas and Chaimahawan, Preeda (2025) Data-driven prediction of failure loads in low-cost FRP-confined reinforced concrete beams. Composites Part C: Open Access, 17. ISSN 26666820

Tham, Xiang Ying and Ng, Cheng Yee and Ong, Muk Chen and Tingkas, Novi Fairindah (2025) A Parametric Study on the Effect of Blade Configuration in a Double-Stage Savonius Hydrokinetic Turbine. Journal of Marine Science and Engineering, 13 (5). ISSN 20771312

Tian, Xiaoqing and Ge, Haofan and Pan, Huachen and Lv, Ming and Zhu, Zefei and Xu, Hao and Leng, Jianxing and Wang, Chizhong (2025) Study on the hydrodynamic characteristics of an outboard engine propeller with hydrophobic coating. Ocean Engineering, 324. ISSN 00298018

Tan, Zesen and Manogaran, M. Devendran and Shamsuddin, Rashid and Hakimi, Mohd and Looi, Lee Wen and Woo, Kaitong and Liew, Chin Seng and Qomariyah, L. (2025) Comparative Study on Composting and Vermicomposting to Improve Physicochemical Properties of Digestate with the Addition of Kitchen Waste. Food Technology and Biotechnology, 63 (2). 149 - 158. ISSN 13309862; 13342606

Thansirichaisree, Phromphat and Ejaz, Ali and Mohamad, H. Bin and Saingam, Panumas and Chaimahawan, Preeda and Hussain, Qudeer (2025) Enhancing Flexural Strength of Concrete Incorporating Natural and Recycled Brick Aggregates with Low-Cost Glass and Carbon Fiber-Reinforced Polymer. Engineered Science, 34. ISSN 25769898; 2576988X

Tamin, Nur Fatihah Binti and Yeong, Yin Fong and Agustian, Joni and Hermida, Lilis and Liew, Lih Xuan (2025) Carbon Composite Derived from Spent Bleaching Earth for Rubbery Wastewater Treatment. Journal of Composites Science, 9 (3). ISSN 2504477X

U

Umair, Muhammad and Khan, Atif and Ullah, Fasee and Masmoudi, Atef and Faheem, Muhammad (2025) Global and Local Context Fusion in Heterogeneous Graph Neural Network for Summarizing Lengthy Scientific Documents. IEEE Access, 13. 53433 – 53447. ISSN 21693536

Utama, Widya and Hermana, Maman and Warnana, Dwa D. and Lestari, Wien and Zakariah, Muhammad Noor Amin and Garini, Sherly Ardhya and Indriani, R. F. and Novian Putra, Dhea P. and Abduh, M. Ulin Nuha and Insani, Alif Nurdien Fitrah (2025) Enhancing Magnetotelluric Data Quality Using Deep Learning-Based Denoising Models: A Study of CNN and LSTM. Journal of Human, Earth, and Future, 6 (2). 399 - 425. ISSN 27852997

Ullah, Zaka and Junaid, Muhammad and Nawi, Illani Mohd (2025) Near-field and polarization control at terahertz with a 2D MXene/VO2 phase change metasurface. Optics Continuum, 4 (2). 198 - 209. ISSN 27700208

V

Verma, Aryan and Priyanka, P. and Khan, Tayyab and Singh, Karan and Yesufu, Lawal.O. and Ariffin, Mazeyanti Mohd and Ahmadian, Ali (2025) ScrutNet: a deep ensemble network for detecting fake news in online text. Social Network Analysis and Mining, 15 (1). ISSN 18695450

Verma, Aryan and Priyanka, Prachi and Khan, Tayyab and Singh, Karan M. and Yesufu, Lawal O. and Mohd Ariffin, Mazeyanti Mohd and Ahmadian, Ali (2025) ScrutNet: a deep ensemble network for detecting fake news in online text. Social Network Analysis and Mining, 15 (1). ISSN 18695469; 18695450

V, Kavin Karthik and N, Aravind and R, Suganya and Kannan, Ramani (2025) An end-to-end deep learning framework for structural damage assessment using semantic segmentation and point cloud analysis. Results in Engineering, 27. ISSN 25901230

V.p, Chithra and Bakthavatchalam, Balaji and Jayakumar, V. Kumar and Kusekar, Sambhaji Kashinath and Kumar Pandey, Adarsh Kumar and Habib, Khairul and Algarni, Salem A. and Alqahtani, Talal (2025) Enhancing heat transfer in compound twisted square ducts using shortened twisted tape inserts. Results in Engineering, 26. ISSN 25901230

V.p, Chithra and Bakthavatchalam, Balaji and Sarasamma, Jayakumar Janardhanan and Habib, Khairul and Kusekar, Sambhaji Kashinath (2025) Conjugate heat transfer analysis of developing region of square ducts for isothermal and isoflux boundary conditions. International Journal of Numerical Methods for Heat and Fluid Flow, 35 (3). 953 - 980. ISSN 09615539

W

Wishnuwardana, Rafi Jusar and Omar, Madiah Binti and Zabiri, Haslinda Binti and Faqih, Mochammad and Bingi, Kishore and Ibrahim, Rosdiazli Bin (2025) Optuna-LightGBM : An Optuna hyperparameter optimization framework for the determination of solvent components in acid gas removal unit using LightGBM. Cleaner Engineering and Technology, 28. ISSN 26667908

Wahab, Sarmed and Salami, Babatunde Abiodun and Danish, Hassan and Nisar, Saad and AlAteah, Ali H. and Alsubeai, Ali (2025) A hybrid machine learning approach for predicting fiber-reinforced polymer-concrete interface bond strength. Engineering Applications of Artificial Intelligence, 148. ISSN 09521976

Waqar, Ahsan and Othman, Idris Bin and Shafiq, Nasir (2025) The role of sustainable procurement in attaining sustainable development goals: Insights from sustainable logistics and sustainable metamorphosis practices. Journal of Cleaner Production, 500. ISSN 09596526

Waqar, Ahsan and Radu, Dorin and Alsulami, Badr T. and Djordjevic, Branislav and Mohamed Salih Ebrahim, Ahmed Fathi and Almujibah, Hamad R. (2025) Functional analysis of LIDAR technology in optimizing efficiency and sustainability in construction sector. Ain Shams Engineering Journal, 16 (2). ISSN 20904479

Y

Yaakop, Zahara and Teh, Hee-Min and Venugopal, Vengatesan and Ma, Zhe (2025) Assessment of Tidal and Wave Energy Resource Potential in Malaysia with Sea Level Rise Effects. Journal of Marine Science and Engineering, 13 (1). ISSN 20771312

Yahaya, Muhammad Sabo and Hashim, Ahmad Sobri B. and Oluwagbemiga Balogun, Abdullateef and Aminu Muazu, Aminu and Sabo Usman, Fatima and Adamu Aliyu, Dahiru and Uwaisu Muhammad, Abdullahi (2025) Exploration and Exploitation Mechanism in Pairwise Test Case Generation: A Systematic Literature Review. IEEE Access, 13. 82342 – 82377. ISSN 21693536

You, Kok Yeow and Al-Areqi, Nadera Najib and Lim, Wei Jer and Lee, Kim Yee and Cheng, Ee Meng and Khe, Cheng Seong (2025) MICROWAVE REFLECTOMETRY CIRCUITS INTEGRATION WITH COAXIAL PROBE FOR INITIAL BREAST TUMOR DETECTION. Jurnal Teknologi, 87 (1). 177 – 188. ISSN 01279696

Yew, Ming Kun and Tan, Chiangti and Yew, Ming Chian and Lee, F. W. and Beh, Jing Han and Lee, Jinchai (2025) Properties of concrete with untreated and treated oil palm shell: A comprehensive review. Journal of Building Engineering, 112. ISSN 23527102

Yaro, Nura Shehu Aliyu and Sutanto, Muslich Hartadi and Hainin, Mohd Rosli and Habib, Noor Zainab and Usman, Aliyu and Bello, Muhammad Sani and Wada, Surajo Abubakar and Adebanjo, Abiola Usman and Jagaba, Ahmad Hussaini (2025) Soft computing applications in asphalt pavement: A comprehensive review of data-driven techniques using response surface methodology and machine learning. Journal of Road Engineering, 5 (2). 129 - 163. ISSN 27730077; 20970498

Yusuf, Aliyu and Sarlan, Aliza Bt and Danyaro, Kamaluddeen Usman and Sani Abd Rahman, Abdullahi and Muazu, Aminu Aminu and Abubakar, Mustapha Yusuf (2025) Deep learning techniques for sentiment analysis in code-switched Hausa-English tweets. International Journal of Information Management Data Insights, 5 (1). ISSN 26670968

Yousafzai, Arsalaan Khan and Sutanto, Muslich Hartadi and Khan, Nasir and Baarimah, Abdullah O. and Wahab, Mohamed Mubarak Abdul and Khan, Muhammad Imran and Madhusudhan, B. R. and Khan, Rawaid (2025) Decision Tree Machine Learning Approach for the Performance Prediction of Asphalt Mixes Modified with Waste Tyre Metal Fibre. Journal of Engineering and Technological Sciences, 57 (3). 303 - 314. ISSN 23375779; 23385502

Yalli, Jameel Shehu and Hasan, Mohd Hilmi Bin and Jung, Low Tang and Al-Selwi, Safwan Mahmood (2025) Authentication schemes for Internet of Things (IoT) networks: A systematic review and security assessment. Internet of Things (The Netherlands), 30. ISSN 25426605

Yan, Shaet Jing and Chan, Yi Jing and Thangalazhy-Gopakumar, S. and Tiong, T. Joyce and Lim, Jun Wei (2025) Optimizing anaerobic digestion of palm oil mill effluent (POME) with biochar: Synergistic impact of biochar addition and kinetic analysis. Journal of Water Process Engineering, 70. ISSN 22147144

Yousafzai, Arsalaan Khan and Sutanto, Muslich Hartadi and Khan, Muhammad Imran and Yaro, Nura Shehu Aliyu and Baarimah, Abdullah O. and Khan, Nasir and Memon, Abdul Muhaimin and Sani, Adamu Abubakar (2025) Systematic Literature Review and Scientometric Analysis on the Advancements in Electrically Conductive Asphalt Technology for Smart and Sustainable Pavements. Transportation Research Record, 2679 (2). 33 - 67. ISSN 03611981; 21694052

Yalli, Jameel Shehu and Hasan, Mohd Hilmi Bin and Jung, Low Tang (2025) Light-Weight Multi-factor Authentication Protocol Using PUF and Fuzzy Categorization for Smart IoT Sensors. Lecture Notes in Electrical Engineering, 1417 L. 594 - 605. ISSN 18761119; 18761100

Z

Zubair, Muhammad and Md Rais, Helmi and Alazemi, Talal (2025) A Novel Attention-Guided Enhanced U-Net With Hybrid Edge-Preserving Structural Loss for Low-Dose CT Image Denoising. IEEE Access, 13. 6909 – 6923. ISSN 21693536

Zhu, Yiqun and Zhang, Quan and Wang, Jiaqiang and Ee, Yit Jing and Sopian, Kamaruzzaman (2025) Research on the Model Predictive Control Strategy of Water Storage Hybrid Free Cooling System in Data Center. Lecture Notes in Electrical Engineering, 1426 L. 368 – 379. ISSN 18761100

Zahid, Muhammad and Abbas, M. Yassir and Shafiq, Nasir and Khan, Iqbal M. and Waqas, Rana Muhammad and ElGawady, Mohamed A. (2025) Optimizing geopolymer performance with alkaline-dissolved fish scales: A novel bio-activated strategy for enhancing strength, shrinkage resistance, and eco-efficiency. Construction and Building Materials, 492. ISSN 09500618

Zaw, Thein Oak Kyaw and Anbananthen, Kalaiarasi Sonai Muthu and Muthaiyah, M. Saravanan and Balasubramaniam, Baarathi and Kannan, Rajkumar and Kalid, Khairul Shafee and Yusoff, Y. Bin and Mohammad, Suraya (2025) A Systematic TOGAF-Driven Framework for Blockchain-Based Food Traceability with Access Control Lists. HighTech and Innovation Journal, 6 (2). 461 - 475. ISSN 27239535

Zarzoor, Ahmed R. and Almuramady, Nabeel and Khudhair, Maher Rehaif and Albarody, Thar Mohammed Badri and Al-Jothery, Husam Kareem Mohsin (2025) Analyzing the Mechanical Properties of Integrated Tread Liner Scraps for Enhanced Efficiency and Sustainability. International Journal of Computational Methods and Experimental Measurements, 13 (2). 441 - 447. ISSN 20460554; 20460546

Zhu, Yiqun and Zhang, Quan and Huang, Gongsheng and Wang, Jiaqiang and Zou, Sikai and Yit, Jing Ee and Sopian, Kamaruzzaman Bin (2025) Research on collaborative control strategy of cold storage and IT workload migration in data center. Energy, 323. ISSN 03605442; 18736785

Zhang, Guilin and Arshad, Noreen Izza Bt and Zhang, Peng and Hazaimeh, Haziem M. and Alqahtani, Aisha M. and KraÃ¯em, Naoufel (2025) Experimental study and finite volume modeling of keyhole dynamics, temperature distribution and weld characteristics in laser welding of austenitic stainless steel tube. Optics and Laser Technology, 183. ISSN 00303992

Zulkifli, Nurul Zahirah and Ramadevi, Bhukya and Bingi, Kishore and Ibrahim, Rosdiazli Bin and Omar, Madiah Binti (2025) Predicting Remaining Useful Life of Induction Motor Bearings from Motor Current Signatures Using Machine Learning. Machines, 13 (5). ISSN 20751702

Zardari, Zaheer Hussain and Mohshim, D. F. (2025) Temperature Dependence Evaluation of CO2 Adsorption on Eagle Ford Shale using Isothermal Models: A Comparative Study. Engineering, Technology and Applied Science Research, 15 (1). 19959 - 19965. ISSN 22414487; 17928036

Zafar, Mudasar and Sakidin, Hamzah Bin and Hussain, Abida and Ullah, Farman and Sheremet, Mikhail A. and Dzulkarnain, Iskandar Bin and Nazar, Roslinda Mohd and Safdar, Rizwan and Al-Yaari, Abdullah (2025) Mathematical Modeling of Nanofluid Flow for Enhanced Oil Recovery Under the Effect of the High Temperature. Journal of Advanced Research in Numerical Heat Transfer, 29 (1). 86 - 101. ISSN 27350142

Zhu, Yiqun and Zhang, Quan and Wang, Jiaqiang and Yit, Jing Ee and Sopian, Kamaruzzaman Bin (2025) Research on the Model Predictive Control Strategy of Water Storage Hybrid Free Cooling System in Data Center. Lecture Notes in Electrical Engineering, 1426 L. 368 - 379. ISSN 18761119; 18761100

This list was generated on Thu Sep 4 02:35:18 2025 +08.