Browse by Type

Group by: Creators | Item Type | No Grouping

Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | Y | Z

Number of items: 1190.

A

Awais, Muhammad Ahsan and Yusoff, Mohd Zuki and Khan, Danish M and Yahya, Norashikin and Kamel, Nidal and Ebrahim, Mansoor (2021) Effective connectivity for decoding electroencephalographic motor imagery using a probabilistic neural network. Sensors, 21 (19). p. 6570.

Anbealagan, Lanisha Devi and Ng, Tiffany Yit Siew and Chew, Thiam Leng and Yeong, Yin Fong and Low, Siew Chun and Ong, Yit Thai and Ho, Chii-Dong and Jawad, Zeinab Abbas (2021) Modified zeolite/polysulfone mixed matrix membrane for enhanced CO2/CH4 separation. Membranes, 11 (8). p. 630.

Azeem, Babar and Elboughdiri, Noureddine and KuShaari, KuZilati and Jamoussi, Bassem and Ghernaout, Djamel and Ghareba, Saad and Raza, Shahid and Gasmi, Aicha (2021) Valorization of almond shellsâ�� lignocellulosic microparticles for controlled release urea production: interactive effect of process parameters on longevity and kinetics of nutrient release. Journal of Coatings Technology and Research. pp. 1-18.

Abunowara, Mustafa and Sufian, Suriati and Bustam, Mohamad Azmi and Babar, Muhammad and Eldemerdash, Usama and Bencini, Roberto and Ullah, Sami and Assiri, Mohammed Ali and Al-Sehemi, Abdullah G and Mukhtar, Ahmad (2021) Experimental and theoretical investigations on kinetic mechanisms of low-pressure CO2 adsorption onto Malaysian coals. Journal of Natural Gas Science and Engineering, 88. p. 103828.

Abbasi, Amin and Yahya, Wan Zaireen Nisa and Nasef, Mohamed Mahmoud and Moniruzzaman, Muhammad and Ghumman, Ali Shaan Manzoor (2021) Copolymerization of palm oil with sulfur using inverse vulcanization to boost the palm oil industry. Polymers and Polymer Composites, 29 (9_supp). S1446-S1456.

Abbasi, Amin and Nasef, Mohamed Mahmoud and Yahya, Wan Zaireen Nisa and Moniruzzaman, Muhammad and Ghumman, Ali Shaan (2021) Preparation and characterization of green polymer by copolymerization of corn oil and sulphur at molten state. Polymers and Polymer Composites, 29 (8). pp. 1179-1190.

Abdul Latif, Abdul Aiman and Lau, Kok Keong and Low, Siew Chun and Azeem, Babar (2021) Multicomponent spiral wound membrane separation model for CO2 removal from natural gas. Membranes, 11 (9). p. 654.

Amin, Hafeez Ullah and Ousta, Firas and Yusoff, Mohd Zuki and Malik, Aamir Saeed (2021) Modulation of cortical activity in response to learning and long-term memory retrieval of 2D verses stereoscopic 3D educational contents: Evidence from an EEG study. Computers in Human Behavior, 114. p. 106526.

Adebayo, Lawal Lanre and Soleimani, Hassan and Guan, Beh Hoe and Öchsner, Andreas and Sabet, Maziyar and Yusuf, Jemilat Yetunde and Ali, Hassan and others (2021) A simple route to prepare Fe3O4@ C microspheres as electromagnetic wave absorbing material. Journal of Materials Research and Technology, 12 (2). pp. 1552-1563.

Ahmad, Aqeel and Mahmood, Hamayoun and Mansor, Nurlidia and Iqbal, Tanveer and Moniruzzaman, Muhammad (2021) Ionic liquid assisted polyetheretherketone-multiwalled carbon nanotubes nanocomposites: An environmentally friendly approach. Journal of Applied Polymer Science, 138 (14). p. 50159.

Ali, Md Korban and Moshikur, Rahman Md and Wakabayashi, Rie and Moniruzzaman, Muhammad and Goto, Masahiro (2021) Biocompatible ionic liquid-mediated micelles for enhanced transdermal delivery of paclitaxel. ACS Applied Materials & Interfaces, 13 (17). pp. 19745-19755.

Aleem, Waqas and Mellon, Nurhayati and Khan, Javed Akbar and Al-Kayiem, Hussain H (2021) Experimental investigation and mathematical modeling of oil/water emulsion separation effectiveness containing alkali-surfactant-polymer. Journal of Dispersion Science and Technology, 42 (9). pp. 1286-1298.

Abulkhair, Hani and Alsaiari, Abdulmohsen and Ahmad, Iqbal and Nallakukkala, Sirisha and Lal, Bhajan and Shariff, Azmi Mohammad (2021) The Feasibility of Binary and Ternary Hydrate Mixtures of CH4, CO2 and C3H8 for Metals Removal.

Ahmed, Rasel and Nazir, Amril and Mahadzir, Shuhaimi and Shorfuzzaman, Mohammad and Islam, Jahedul (2021) Niching grey wolf optimizer for multimodal optimization problems. Applied Sciences, 11 (11). p. 4795.

Al--Swai, Basem M and Osman, Noridah Binti and Ramli, Anita and Abdullah, Bawadi and Farooqi, Ahmad Salam and Ayodele, Bamidele Victor and Patrick, David Onoja (2021) Low-temperature catalytic conversion of greenhouse gases (CO2 and CH4) to syngas over ceria-magnesia mixed oxide supported nickel catalysts. International Journal of Hydrogen Energy, 46 (48). pp. 24768-24780.

Ahmed, Rasel and Mahadzir, Shuhaimi and Rozali, Nor Erniza Mohammad and Biswas, Kallol and Matovu, Fahad and Ahmed, Kamran (2021) Artificial intelligence techniques in refrigeration system modelling and optimization: A multi-disciplinary review. Sustainable Energy Technologies and Assessments, 47. p. 101488.

Abbasi, Amin and Nasef, Mohamed Mahmoud and Yahya, Wan Zaireen Nisa and Moniruzzaman, Muhammad and Ghumman, Ali Shaan Manzoor (2021) Preparation and characterization of sulfur-vinylbenzyl chloride polymer under optimized reaction conditions using inverse vulcanization. European Polymer Journal, 143. p. 110202.

Ammad, S. and Alaloul, W.S. and Saad, S. and Qureshi, A.H. (2021) Personal protective equipment (PPE) usage in construction projects: A scientometric approach. Journal of Building Engineering, 35.

Ammad, S. and Alaloul, W.S. and Saad, S. and Qureshi, A.H. (2021) Personal Protective Equipment (PPE) usage in Construction Projects: A Systematic Review and Smart PLS Approach. Ain Shams Engineering Journal.

Alaloul, W.S. and Alzubi, K.M. and Malkawi, A.B. and Al Salaheen, M. and Musarat, M.A. (2021) Productivity monitoring in building construction projects: a systematic review. Engineering, Construction and Architectural Management.

Alhammadi, S.A. and Tayeh, B.A. and Alaloul, W.S. and Jouda, A.F. (2021) Occupational health and safety practice in infrastructure projects. International Journal of Occupational Safety and Ergonomics.

Abbasi, H.A. and Shaari, Z.B.H. and Moughal, W. and Ismail, I.N.B. (2021) Motivation Toward Plugin Hybrid Electric Vehicles to Reduce Transport Carbon Emission in Malaysia: A Conceptual Paper. Eurasian Studies in Business and Economics, 20. pp. 163-178.

Al-Masgari, A.A.-S. and Elsaadany, M. and Rahman, A.H.B.A. and Hermana, M. and Latiff, A.H.A. and Babikir, I. and Adeleke, T.O. and Imran, Q.S. and Appiah, N. (2021) A GUIDELINE FOR SEISMIC SEQUENCE STRATIGRAPHY INTERPRETATION. ARPN Journal of Engineering and Applied Sciences, 16 (2). pp. 165-183.

Aole, S. and Elamvazuthi, I. and Waghmare, L. and Patre, B. and Meriaudeau, F. (2021) Non-linear active disturbance rejection control for upper limb rehabilitation exoskeleton. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 235 (5). pp. 606-632.

Aslam, B. and Maqsoom, A. and Salah Alaloul, W. and Ali Musarat, M. and Jabbar, T. and Zafar, A. (2021) Soil erosion susceptibility mapping using a GIS-based multi-criteria decision approach: Case of district Chitral, Pakistan. Ain Shams Engineering Journal, 12 (2). pp. 1637-1649.

Alyan, E. and Saad, N.M. and Kamel, N. and Rahman, M.A. (2021) Workplace design-related stress effects on prefrontal cortex connectivity and neurovascular coupling. Applied Ergonomics, 96.

Ameen Hezam Saeed, A. and Yub Harun, N. and Mahmoud Nasef, M. and Al-Fakih, A. and Abdulhakim Saeed Ghaleb, A. and Kolawole Afolabi, H. (2021) Removal of cadmium from aqueous solution by optimized rice husk biochar using response surface methodology. Ain Shams Engineering Journal.

Azhar Ali, S.E. and Rizvi, S.S.H. and Lai, F. and Faizan Ali, R. and Ali Jan, A. (2021) Predicting Delinquency on Mortgage Loans: An Exhaustive Parametric Comparison of Machine Learning Techniques. International Journal of Industrial Engineering and Management, 12 (1). pp. 1-13.

Al-Hiyali, M.I. and Yahya, N. and Faye, I. and Hussein, A.F. (2021) Identification of autism subtypes based on wavelet coherence of BOLD FMRI signals using convolutional neural network. Sensors, 21 (16).

Al-Jothery, H.K.M. and Albarody, T.M.B. and Megat-Yusoff, P.S.M. and Al-Shaibani, N. and Mohammed, H.G. (2021) Experimental Investigations on Microwave-Current Assisted Sintering Process and Oxidation of Graphite Die at High Temperature. International Journal of Automotive and Mechanical Engineering, 18 (2). pp. 8781-8789.

Aquil, M.A.I. and Ishak, W.H.W. (2021) Evaluation of scratch and pre-trained convolutional neural networks for the classification of tomato plant diseases. IAES International Journal of Artificial Intelligence, 10 (2). pp. 467-475.

Albaghdadi, A.M. and Baharom, M.B. and Sualiman, S.A. (2021) Balancing and Simulation of a Double Crank-Rocker Engine Model for Optimum Reduction of Shaking Forces and Shaking Moments. Mathematical Modelling of Engineering Problems, 8 (2). pp. 237-245.

Al-Ezzi, A. and Kamel, N. and Faye, I. and Gunaseli, E. (2021) Analysis of default mode network in social anxiety disorder: Eeg resting-state effective connectivity study. Sensors, 21 (12).

Ahmad, A. and Sutanto, M.H. and Al-Bared, M.A.M. and Harahap, I.S.H. and Abad, S.V.A.N.K. and Khan, M.A. (2021) Physio-Chemical Properties, Consolidation, and Stabilization of Tropical Peat Soil Using Traditional Soil Additives â�� A State of the Art Literature Review. KSCE Journal of Civil Engineering.

Arshad, U. and Taqvi, S.A.A. and Buang, A. (2021) Modelling of the minimum ignition temperature (MIT) of corn dust using statistical analysis and artificial neural networks based on the synergistic effect of concentration and dispersion pressure. Process Safety and Environmental Protection, 147. pp. 742-755.

Al-Wajih, R. and Abdulkadir, S.J. and Aziz, N. and Al-Tashi, Q. and Talpur, N. (2021) Hybrid binary grey Wolf with Harris hawks optimizer for feature selection. IEEE Access, 9. pp. 31662-31677.

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Yusoff, N.I.M. and Khairuddin, F.H. and Memon, A.M. (2021) Evaluation of the high-temperature rheological performance of tire pyrolysis oil-modified bio-asphalt. International Journal of Pavement Engineering.

Al-Masgari, A.A. and Elsaadany, M. and Siddiqui, N.A. and Abdul Latiff, A.H. and Bakar, A.A. and Elkurdy, S. and Hermana, M. and Babikir, I. and Imran, Q.S. and Adeleke, T. (2021) Geomorphological geometries and high-resolution seismic sequence stratigraphy of malay basinâ��s fluvial succession. Applied Sciences (Switzerland), 11 (11).

Aziz, N. and Nordin, M.J. and Abdulkadir, S.J. and Salih, M.M.M. (2021) Digital addiction: Systematic review of computer game addiction impact on adolescent physical health. Electronics (Switzerland), 10 (9).

Al-Sabaeei, A. and Napiah, M. and Sutanto, M. and Habib, N.Z. and Bala, N. and Kumalasari, I. and Ghaleb, A. (2021) Application of nano silica particles to improve high-temperature rheological performance of tyre pyrolysis oil-modified bitumen. Road Materials and Pavement Design.

Alaloul, W.S. and Musarat, M.A. and Liew, M.S. and Qureshi, A.H. and Maqsoom, A. (2021) Investigating the impact of inflation on labour wages in Construction Industry of Malaysia. Ain Shams Engineering Journal, 12 (2). pp. 1575-1582.

Alaloul, W.S. and Qureshi, A.H. and Musarat, M.A. and Saad, S. (2021) Evolution of close-range detection and data acquisition technologies towards automation in construction progress monitoring. Journal of Building Engineering, 43.

Akbar, A. and Majid, M.A.B.A. and Mokhtar, A.A. (2021) Life cycle costing of thermal energy storage system using CAPEX and OPEX. Journal of Mechanical Science and Technology, 35 (7). pp. 3223-3229.

Al-Sabaeei, A.M. and Napiah, M. and Sutanto, M. and Alaloul, W. and Md Yusoff, N.I. and Imran Khan, M. and Modibbo Saeed, S. (2021) Physicochemical, rheological and microstructural properties of Nano-Silica modified Bio-Asphalt. Construction and Building Materials, 297.

Al-Wajih, R. and Abdulkadir, S.J. and Aziz, N. and Al-Tashi, Q. and Talpur, N. (2021) Hybrid Binary Grey Wolf with Harris Hawks Optimizer for Feature Selection. IEEE Access.

Ahmad, M.A. and Letchumanan, A. and Samsuri, S. and Mazli, W.N.A. and Md Saad, J. (2021) Parametric study of glycerol and contaminants removal from biodiesel through solvent-aided crystallization. Bioresources and Bioprocessing, 8 (1).

Alqushaibi, A. and Abdulkadir, S.J. and Rais, H.M. and Al-Tashi, Q. and Ragab, M.G. and Alhussian, H. (2021) Enhanced weight-optimized recurrent neural networks based on sine cosine algorithm for wave height prediction. Journal of Marine Science and Engineering, 9 (5).

Abdul Kadir, E. and Listia Rosa, S. and Syukur, A. and Othman, M. and Daud, H. (2021) Forest fire spreading and carbon concentration identification in tropical region Indonesia. Alexandria Engineering Journal.

Al-Amin, M. and Abdul-Rani, A.M. and Ahmed, R. and Rao, T.V.V.L.N. (2021) Multiple-objective optimization of hydroxyapatite-added EDM technique for processing of 316L-steel. Materials and Manufacturing Processes, 36 (10). pp. 1134-1145.

Almahbashi, N.M.Y. and Kutty, S.R.M. and Ayoub, M. and Noor, A. and Salihi, I.U. and Al-Nini, A. and Jagaba, A.H. and Aldhawi, B.N.S. and Ghaleb, A.A.S. (2021) Optimization of Preparation Conditions of Sewage sludge based Activated Carbon. Ain Shams Engineering Journal, 12 (2). pp. 1175-1182.

Alhammadi, S.A. and Tayeh, B.A. and Alaloul, W.S. and Salem, T.J. (2021) Risk Management Strategies in Construction Organizations. Open Civil Engineering Journal, 15 (1). pp. 406-413.

Anggraeni, S. and Putri, S.R. and Nandiyanto, A.B.D. and Bilad, M.R. (2021) Effect of particle size and tapioca starch content on performance of the rice husk and red bean skin briquettes. Journal of Engineering Science and Technology, 16 (2). pp. 1733-1745.

Anggraeni, S. and Hofifah, S.N. and Nandiyanto, A.B.D. and Bilad, M.R. (2021) Effects of particle size and composition of cassava peels and rice husk on the briquette performance. Journal of Engineering Science and Technology, 16 (1). pp. 527-542.

Anggraeni, S. and Girsang, G.C.S. and Nandiyanto, A.B.D. and Bilad, M.R. (2021) Effects of particle size and composition of sawdust/carbon from rice husk on the briquette performance. Journal of Engineering Science and Technology, 16 (3). pp. 2298-2311.

Alkawsi, G.A. and Ali, N. and Mustafa, A.S. and Baashar, Y. and Alhussian, H. and Alkahtani, A. and Tiong, S.K. and Ekanayake, J. (2021) A hybrid SEM-neural network method for identifying acceptance factors of the smart meters in Malaysia: Challenges perspective. Alexandria Engineering Journal, 60 (1). pp. 227-240.

Akhter, J. and Gilani, S.I. and Al-Kayiem, H.H. and Ali, M. (2021) Performance Evaluation of a Modified Compound Parabolic Concentrating Collector with Varying Concentration Ratio. Heat Transfer Engineering, 42 (13-14). pp. 1117-1131.

Al-Amin, M. and Abdul-Rani, A.M. and Ahmed, R. and Shahid, M.U. and Zohura, F.T. and Rani, M.D.B.A. (2021) Multi-objective optimization of process variables for MWCNT-added electro-discharge machining of 316L steel. International Journal of Advanced Manufacturing Technology, 115 (1-2). pp. 179-198.

Aman, M. and Abdulkadir, S.J. and Aziz, I.A. and Alhussian, H. and Ullah, I. (2021) KP-Rank: a semantic-based unsupervised approach for keyphrase extraction from text data. Multimedia Tools and Applications, 80 (8). pp. 12469-12506.

Abro, G.E.M. and Mathur, N. and Zulkifli, S.A.B.M. and Kakar, M.G.K.G.K. and Pasupuleti, N.S. and Asirvadam, V.S.S. (2021) Designing an IoT-based disinfectant gate for reducing the reproductive coefficient of the novel coronavirus COVID-19 in Malaysia. World Journal of Engineering.

Al-Atesh, E.A. and Rahmawati, Y. and Zawawi, N.A.W.A. and Utomo, C. (2021) A decision-making model for supporting selection of green building materials. International Journal of Construction Management.

Arshad, U. and Taqvi, S.A.A. and Buang, A. and Awad, A. (2021) SVM, ANN, and PSF modelling approaches for prediction of iron dust minimum ignition temperature (MIT) based on the synergistic effect of dispersion pressure and concentration. Process Safety and Environmental Protection, 152. pp. 375-390.

Al Kaisy, G.M.J. and Mutalib, M.I.A. and Rao, T.V.V.L.N. and Senatore, A. (2021) Tribological performance of low viscosity halogen-free ammonium based protic ionic liquids with carboxylate anions as neat lubricants. Tribology International, 160.

Alam, M.K. and Aziz, A.A. and Latif, S.A. and Aziz, A.A. (2021) Error-Control Truncated SVD Technique for In-Network Data Compression in Wireless Sensor Networks. IEEE Access, 9. pp. 13829-13844.

Ahmad, F. and Amjad, W.A. and Mehmood, F. and Jan, M.T. and Dennis, J.O. and Khir, M.H.B.M. (2021) Design, modelling and testing of CMOS-MEMS switch. Microsystem Technologies, 27 (7). pp. 2543-2552.

Al-Ghobari, M. and Muneer, A. and Fati, S.M. (2021) Location-aware personalized traveler recommender system (lapta) using collaborative filtering knn. Computers, Materials and Continua, 69 (2). pp. 1553-1570.

Asnor, A.I. and Yatim, S.A.M. and Ibrahim, Z.B. and Zainuddin, N. (2021) High order block method for third order ODEs. Computers, Materials and Continua, 67 (1). pp. 1253-1267.

Alani, S. and Zakaria, Z. and Saeidi, T. and Ahmad, A. and Imran, M.A. and Abbasi, Q.H. (2021) Microwave imaging of breast skin utilizing elliptical uwb antenna and reverse problems algorithm. Micromachines, 12 (6).

Al-Masgari, A.A.-S. and Elsaadany, M. and Latiff, A.H.A. and Hermana, M. and Hamzah, U.B. and Babikir, I. and Adeleke, T. and Imran, Q.S. and Al-Bared, M.A.M. (2021) Seismic sequence stratigraphic sub-division using well logs and seismic data of Taranaki Basin, New Zealand. Applied Sciences (Switzerland), 11 (3). pp. 1-21.

Ali, A. and Ilyas, S.U. and Danish, M. and Abdulrahman, A. and Maqsood, K. and Ahmed, A. and Murshid, G. and Rubaiee, S. and Alsaady, M. and Mahfouz, A.B. and Hanbazazah, A.S. (2021) Multi-objective optimization of thermophysical properties of fâ��Al2O3 nano-dispersions in heat transfer oil. SN Applied Sciences, 3 (2).

Abbasi, A.Z. and Rehman, U. and Hussain, A. and Ting, D.H. and Islam, J.U. (2021) The impact of advertising value of in-game pop-up ads in online gaming on gamersâ�� inspiration: An empirical investigation. Telematics and Informatics, 62.

Al-Waked, R. and Nasif, M. and Groenhout, N. and Partridge, L. (2021) Natural ventilation of residential building Atrium under fire scenario. Case Studies in Thermal Engineering, 26.

Ali, S. and Ahmad, F. and Yusoff, P.S.M.M. and Muhamad, N. and OÃ±ate, E. and Raza, M.R. and Malik, K. (2021) A review of graphene reinforced Cu matrix composites for thermal management of smart electronics. Composites Part A: Applied Science and Manufacturing, 144.

Abu Aisheh, Y.I. and Tayeh, B.A. and Alaloul, W.S. and Almalki, A. (2021) Health and safety improvement in construction projects: a lean construction approach. International Journal of Occupational Safety and Ergonomics.

Alyousifi, Y. and Othman, M. and Almohammedi, A.A. (2021) A Novel Stochastic Fuzzy Time Series Forecasting Model Based on a New Partition Method. IEEE Access, 9. pp. 80236-80252.

Alhawari, A.R.H. and Majeed, S.F. and Saeidi, T. and Mumtaz, S. and Alghamdi, H. and Hindi, A.T. and Almawgani, A.H.M. and Imran, M.A. and Abbasi, Q.H. (2021) Compact elliptical uwb antenna for underwater wireless communications. Micromachines, 12 (4).

Al-Kayiem, H.H. and Ismaeel, A.A. and Baheta, A.T. and Aurybi, M.A. (2021) Performance enhancement of solar vortex power generator by Al2O3-in-black paint coating. Journal of Cleaner Production, 316.

Abdulrahman, S. and Hainin, M.R. and Idham Mohd Satar, M.K. and Hassan, N.A. and Usman, A. (2021) Mechanical performance and global warming potential of unaged warm cup lump modified asphalt. Journal of Cleaner Production, 297.

Adam, M.R. and Othman, M.H.D. and Sheikh Abdul Kadir, S.H. and Puteh, M.H. and Jamalludin, M.R. and Md Nordin, N.A.H. and Ab Rani, M.A. and Mustafa, A. and Rahman, M.A. and Jaafar, J. (2021) Fabrication, performance evaluation, and optimisation of adsorptive ammonia removal using hollow fibre ceramic membrane: Response surface methodology approach. Microporous and Mesoporous Materials, 316.

Alarifi, H. and Mohamad, H. and Nordin, N.F. and Yusoff, M. and Rafindadi, A.D. and Widjaja, B. (2021) A large-scale model of lateral pressure on a buried pipeline in medium dense sand. Applied Sciences (Switzerland), 11 (12).

Awad, A. and Ahmed, I. and Qadir, D. and Khan, M.S. and Idris, A. (2021) Catalytic decomposition of 2 methanol in methane over metallic catalyst by fixed-bed catalytic reactor. Energies, 14 (8).

Abdelmohimen, M.A.H. and Algarni, S. and Almutairi, K. and Ahmed, G.M.S. and Irshad, K. and Irfan, S.A. (2021) Improving Heat Transfer of Plate-Fin Heat Sinks Using through Rod Configurations. Journal of Thermal Science and Engineering Applications, 13 (1).

Ali, S.M. and Sovuthy, C. and Noghanian, S. and Ali, Z. and Abbasi, Q.H. and Imran, M.A. and Saeidi, T. and Socheatra, S. (2021) Design and evaluation of a flexible dual-band meander line monopole antenna for on-and off-body healthcare applications. Micromachines, 12 (5).

Alyan, E. and Saad, N.M. and Kamel, N. and Yusoff, M.Z. and Zakariya, M.A. and Rahman, M.A. and Guillet, C. and Merienne, F. (2021) Frontal electroencephalogram alpha asymmetry during mental stress related to workplace noise. Sensors, 21 (6). pp. 1-12.

Al-Ezzi, A. and Yahya, N. and Kamel, N. and Faye, I. and Alsaih, K. and Gunaseli, E. (2021) Severity Assessment of Social Anxiety Disorder using Deep Learning Models on Brain Effective Connectivity. IEEE Access.

Abbasi, A.Z. and Shah, M.U. and Rehman, U. and Hlavacs, H. and Ting, D.H. and Nisar, S. (2021) The Role of Personality Factors Influencing Consumer Video Game Engagement in Young Adults: A Study on Generic Games. IEEE Access, 9. pp. 17392-17410.

Al-Fakih, A. and Hisbany Mohd Hashim, M. and Alyousef, R. and Mutafi, A. and Hussein Abo Sabah, S. and Tafsirojjaman, T. (2021) Cracking behavior of sea sand RC beam bonded externally with CFRP plate. Structures, 33. pp. 1578-1589.

Ali, E.M. and Yahaya, N.Z. and Saraereh, O.A. and Assaf, A.H.A. and Alqasem, B.H. and Iqbal, S. and Ibrahim, O. and Patel, A.V. (2021) Power conversion using analytical model of cockcroftâ��walton voltage multiplier rectenna. Electronics (Switzerland), 10 (8).

Ashraf, M.S. and Hassan Shah, M.U. and Bokhari, A. and Hasan, M. (2021) Less is more: Optimising the biocementation of coastal sands by reducing influent urea through response surface method. Journal of Cleaner Production, 315.

Al-Bared, M.A.M. and Mustaffa, Z. and Armaghani, D.J. and Marto, A. and Yunus, N.Z.M. and Hasanipanah, M. (2021) Application of hybrid intelligent systems in predicting the unconfined compressive strength of clay material mixed with recycled additive. Transportation Geotechnics, 30.

Amran, M. and Murali, G. and Khalid, N.H.A. and Fediuk, R. and Ozbakkaloglu, T. and Lee, Y.H. and Haruna, S. and Lee, Y.Y. (2021) Slag uses in making an ecofriendly and sustainable concrete: A review. Construction and Building Materials, 272.

Abd Manan, T.S.B. and Khan, T. and Wan Mohtar, W.H.M. and Beddu, S. and Qazi, S. and Sheikh Khozani, Z. and Mohd Kamal, N.L. and Sarwono, A. and Jusoh, H. and Yavari, S. and Mustafa, S.F.Z. and Hanafiah, Z. and Mohd Zaid, H.F. and Machmudah, A. and Isa, M.H. and Ahmad, A. and Ghanim, A.A.J. (2021) Ecological and health risk assessment of polycyclic aromatic hydrocarbons (PAHs) in Sungai Perak, Malaysia. Journal of Cleaner Production, 294.

Alraeeini, A.S. and Nikbakht, E. and Ismail, M.C. (2021) Square Steel Tube Impressed Current Corrosion Rate in Term of Linear Polarization Resistance (LPR) Method. Lecture Notes in Civil Engineering, 139 LN. pp. 123-130.

Ayub, U.B. and Balogun, A.-L.B. (2021) Spatial analysis for sustainable campus transportation: A case study of utp. Lecture Notes in Civil Engineering, 132. pp. 870-882.

Azhari, N.A. and Mohamad, H. (2021) Greenfield settlement of kvmrt ssp line 2 in kuala lumpur limestone formation. Lecture Notes in Civil Engineering, 132. pp. 1027-1034.

Alsubal, S. and Liew, M.S. and Lim, E.S. and Harahap, I.S.H. and Nasser, A.M.M. (2021) The future of wind power in malaysia: A review. Lecture Notes in Civil Engineering, 132. pp. 844-851.

Al-Atesh, E. and Rahmawati, Y. and Abdullah Zawawi, N.A.W. (2021) Sustainability criteria for green building material selection in the malaysian construction industry. Lecture Notes in Civil Engineering, 132. pp. 693-700.

Abdullah, M.S. and Alaloul, W.S. and Liew, M.S. and Musarat, M.A. (2021) Delay and cost overrun of palm oil refinery construction projects: Artificial neural network (ann) model. Lecture Notes in Civil Engineering, 132. pp. 580-589.

Alaloul, W.S. and Musarat, M.A. and Hui, C.J. (2021) Impact of elevated temperature on rubberized concrete: A review. Lecture Notes in Civil Engineering, 132. pp. 421-427.

Alawag, A.M.M. and Alaloul, W.S. and Liew, M.S. and Al-Bared, M.A.M. and Zawawi, N.A.W.A. and Ammad, S. (2021) The Implementation of the Industrialized Building System in the Malaysian Construction Industryâ��a Comprehensive Review. Lecture Notes in Mechanical Engineering. pp. 3-16.

Adibah, N.A. and Azella, S.N. and Shukur, M.F.A. (2021) Synthesis of Ti3C2 mxene through in situ hf and direct hf etching procedures as electrolyte fillers in dye-sensitized solar cell. Materials Science Forum, 1023 M. pp. 15-20.

Ahmad, S. and Shafiq, N. and Iqbal, H.W. and Ahmad, R.Z. and Abbas, Z. and Rehman, A.-U. and Ali, M. (2021) Effect of slag on chloride resistance of concrete. Lecture Notes in Civil Engineering, 132. pp. 365-374.

Abd Razak, S.N. and Guillaumat, L. and Shafiq, N. (2021) Effect of fire flame exposure on basalt and carbon fiber-reinforced concrete. Lecture Notes in Civil Engineering, 132. pp. 573-579.

Aswin, M. and Nikbakht, E. and Bt Nazir, N.S. and Bt Tajuddin, N.S. and Bt Ahmad, N.A. (2021) Experimental study on structural behaviour of corbels with hybrid fibre reinforced concrete (Hyfrc). Lecture Notes in Civil Engineering, 132. pp. 413-420.

Arinee, M.S.N. and Idris, O. and Rahim, I.B.A. (2021) Human factor engineering in oil and gas construction works â�� a case study to mitigate safety risk. Lecture Notes in Civil Engineering, 132. pp. 590-601.

Afolabi, F. and Mahmood, S.M. and Johnson, J. and Peters, O.A. (2021) Synthesis and Characterization of a Cellulose-Based Polymeric Surfactant Towards Applications in Enhanced Oil Recovery. Lecture Notes in Mechanical Engineering. pp. 210-219.

Anwar, A. and Mohammed, B.S. and Wahab, M.B.A. and Muthusamy, K. and Liew, M.S. (2021) Structural Quality of Graphene Oxide Nanosheets on the Basis of Defect Ratio: A Raman Study. Lecture Notes in Mechanical Engineering, 46. pp. 423-439.

Al-Qadami, E.H.H. and Mustaffa, Z. and MartÃnez-Gomariz, E. and Yusof, K.W. and Abdurrasheed, A.S. and Shah, S.M.H. (2021) Numerical simulation to assess floating instability of small passenger vehicle under sub-critical flow. Lecture Notes in Civil Engineering, 132. pp. 258-265.

Affam, A.C. and Chung, W.C. and Lau, P.L. and Johnson, O.A. and Seong, K.C. and Baloo, L. and Peng, B.W.L. and XÄ±nru, F. (2021) Design expert application for optimization of ag/agbr/tio2 visible light photocatalyst preparation. Lecture Notes in Civil Engineering, 132. pp. 93-102.

Abimbola, T.O. and Wan Yusof, K. and Takaijudin, H. and Abdurrasheed, A.S. and Al-Qadami, E.H.H. and Ishola, S.A. and Owoseni, T.A. and Akilu, S. (2021) A concise review of major desalination techniques: Features and limitations. Lecture Notes in Civil Engineering, 132. pp. 154-162.

Anas, M.R. and Dharmowijoyo, D.B.E. and Kresnanto, N.C. (2021) Toward applying complexity perspective on travel behaviour research. Lecture Notes in Civil Engineering, 132. pp. 1091-1097.

Alvan, S. and Ramli, M.I. and Yatmar, H. and Hustim, M. and Anas, R. (2021) The influence of socio-demographic and activity-travel participation variables on mode choice for the new railway development in south sulawesi, indonesia (Case: Makassar-parepare line). Lecture Notes in Civil Engineering, 132. pp. 907-919.

Ahmad, W.F.W. and Harnaini, A.F.A. (2021) SpaceScience App: Development of a Mobile Application for School Children. Lecture Notes on Data Engineering and Communications Technologies, 72. pp. 1177-1186.

Ameen, A.O. and Mojeed, H.A. and Bolariwa, A.T. and Balogun, A.O. and Mabayoje, M.A. and Usman-Hamzah, F.E. and Abdulraheem, M. (2021) Application of Shuffled Frog-Leaping Algorithm for Optimal Software Project Scheduling and Staffing. Lecture Notes on Data Engineering and Communications Technologies, 72. pp. 293-303.

Aina, Y.A. and Parvez, I.M. and Balogun, A.-L. and Adam, E. (2021) Urban Heat Island Effects and Mitigation Strategies in Saudi Arabian Cities. Advances in 21st Century Human Settlements. pp. 235-248.

Ahmad, R.K. and Sulaiman, S.A. and Dol, S.S. and Umar, H.A. (2021) The potential of coconut shells through pyrolysis technology in nigeria. Green Energy and Technology. pp. 151-175.

Akilu, S. and Padmanabhan, E. and Sun, Z. (2021) A review of transport mechanisms and models for unconventional tight shale gas reservoir systems. International Journal of Heat and Mass Transfer, 175.

Ali, R.F. and Dominic, P.D.D. and Ali, S.E.A. and Rehman, M. and Sohail, A. (2021) Information security behavior and information security policy compliance: a systematic literature review for identifying the transformation process from noncompliance to compliance. Applied Sciences (Switzerland), 11 (8).

Ahmad, T. and Iqbal, J. and Bustam, M.A. and Irfan, M. and Anwaar Asghar, H.M. (2021) A critical review on phytosynthesis of gold nanoparticles: Issues, challenges and future perspectives. Journal of Cleaner Production, 309.

Ab Rahman, S.S. and Beg, M.A. and Soto, G.J. and Bing, S.B. and Lubis, L.A. and Poppelreiter, M.C. (2021) Seismic Multiatributes Characterisation of Karst Distribution Pattern in an Isolated Middle Miocene Carbonate Platform: FX Field, Central Luconia Province Malaysia. Petroleum and Coal, 63 (1). pp. 139-150.

Abbas, M.A. and Zamir, A. and Elraies, K.A. and Mahmood, S.M. and Rasool, M.H. (2021) A critical parametric review of polymers as shale inhibitors in water-based drilling fluids. Journal of Petroleum Science and Engineering, 204.

Abbasi, A. and Yahya, W.Z.N. and Nasef, M.M. and Moniruzzaman, M. and Ghumman, A.S.M. (2021) Copolymerization of palm oil with sulfur using inverse vulcanization to boost the palm oil industry. Polymers and Polymer Composites, 29 (9suppl). S1446-S1456.

Abbasi, A. and Nasef, M.M. and Yahya, W.Z.N. and Moniruzzaman, M. and Ghumman, A.S. (2021) Preparation and characterization of green polymer by copolymerization of corn oil and sulphur at molten state. Polymers and Polymer Composites, 29 (8). pp. 1179-1190.

Abbasi, A. and Nasef, M.M. and Yahya, W.Z.N. and Moniruzzaman, M. and Ghumman, A.S.M. (2021) Preparation and characterization of sulfur-vinylbenzyl chloride polymer under optimized reaction conditions using inverse vulcanization. European Polymer Journal, 143.

Abbasi, A.Z. and Asif, M. and Hollebeek, L.D. and Islam, J.U. and Ting, D.H. and Rehman, U. (2021) The effects of consumer esports videogame engagement on consumption behaviors. Journal of Product and Brand Management, 30 (8). pp. 1194-1211.

Abbasi, A.Z. and Rehman, U. and Ting, D.H. and Quraishi, M.A. (2021) Do pop-up ads in online videogames influence childrenâ��s inspired-to behavior? Young Consumers.

Abbasi, A.Z. and Hassan, M. and Rehman, U. and Hlavacs, H. and Ting, D.H. and Shah, M.U. (2021) How Engagement with Gamified Applications Impacts Quality of Life: A Conceptual Model. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 13097 . pp. 3-10.

Abbasi, A.Z. and Rehman, U. and Fayyaz, M.S. and Ting, D.H. and Shah, M.U. and Fatima, R. (2021) Using the playful consumption experience model to uncover behavioral intention to play Multiplayer Online Battle Arena (MOBA) games. Data Technologies and Applications.

Abbasi, A.Z. and Shamim, A. and Ting, D.H. and Hlavacs, H. and Rehman, U. (2021) Playful-consumption experiences and subjective well-being: Children's smartphone usage. Entertainment Computing, 36.

Abbasi, H.A. and Johl, S.K. and Shaari, Z.B.H. and Moughal, W. and Mazhar, M. and Musarat, M.A. and Rafiq, W. and Farooqi, A.S. and Borovkov, A. (2021) Consumer motivation by using unified theory of acceptance and use of technology towards electric vehicles. Sustainability (Switzerland), 13 (21).

Abbasi, I.A. and Ashari, H. and Jan, A. and Ariffin, A.S. (2021) Contract farming towards social business: A new paradigm. Sustainability (Switzerland), 13 (22).

Abbasi, U.F. and Haider, N. and Awang, A. and Khan, K.S. (2021) Cross-Layer MAC/Routing Protocol for Reliable Communication in Internet of Health Things. IEEE Open Journal of the Communications Society, 2. pp. 199-216.

Abd Aziz, A. and Izhar, L.I. and Asirvadam, V.S. and Tang, T.B. and Ajam, A. and Omar, Z. and Muda, S. (2021) Detection of Collaterals from Cone-Beam CT Images in Stroke. Sensors (Basel, Switzerland), 21 (23).

Abd Manan, T.S.B. and Beddu, S. and Mohd Kamal, N.L. and Mohamad, D. and Itam, Z. and Khan, T. and Machmudah, A. and Dutykh, D. and Mohtar, W.H.M.W. and Jusoh, H. and Nazri, F.M. and Yapandi, M.F.K.M. and Pati, S. and Ahmad, A. and Rasdi, N.W. (2021) Ecological risk indicators for leached heavy metals from coal ash generated at a malaysian power plant. Sustainability (Switzerland), 13 (18).

Abd Manan, T.S.B. and Beddu, S. and Mohamad, D. and Mohd Kamal, N.L. and Itam, Z. and Khan, T. and Jusoh, H. and Abdul Rahman, N.A. and Mohamed Nazri, F. and Mohd Yapandi, M.F.K. and Wan Mohtar, W.H.M. and Isa, M.H. and Che Muda, Z. and Ahmad, A. and Wan Rasdi, N. (2021) Physicochemical properties of absorbent hydrogel polymers in disposable baby diapers. Chemical Physics Letters, 774.

Abd Manan, T.S.B. and Beddu, S. and Mohamad, D. and Mohd Kamal, N.L. and Wan Mohtar, W.H.M. and Khan, T. and Jusoh, H. and Sarwono, A. and Ali, M.M. and Che Muda, Z. and Mohamed Nazri, F. and Isa, M.H. and Ghanim, A.A.J. and Ahmad, A. and Wan Rasdi, N. and Basri, N.A.N. (2021) Physicochemical and leaching properties of coal ashes from Malaysian coal power plant. Chemical Physics Letters, 769.

Abd Razak, S.N. and Guillaumat, L. and Shafiq, N. (2021) Effect of fire flame exposure on basalt and carbon fiber-reinforced concrete. Lecture Notes in Civil Engineering, 132. pp. 573-579.

Abdul Karim, S.A. and Saaban, A. and Nguyen, V.T. (2021) Construction of C1 Rational Bi-Quartic Spline With Positivity-Preserving Interpolation: Numerical Results and Analysis. Frontiers in Physics, 9.

Abdul Rahim, A.R. and Mohsin, H.M. and Chin, K.B.L. and Johari, K. and Saman, N. (2021) Promising Low-cost Adsorbent from Desiccated Coconut Waste for Removal of Congo Red Dye from Aqueous Solution. Water, Air, and Soil Pollution, 232 (9).

Abdul Wahhab, H.A. and Al-Kayiem, H.H. (2021) Environmental risk mitigation by biodiesel blending from eichhornia crassipes: Performance and emission assessment. Sustainability (Switzerland), 13 (15).

Abdulelah, H. and Al-Yaseri, A. and Ali, M. and Giwelli, A. and Negash, B.M. and Sarmadivaleh, M. (2021) CO2/Basalt's interfacial tension and wettability directly from gas density: Implications for Carbon Geo-sequestration. Journal of Petroleum Science and Engineering, 204.

Abdulelah, H. and Negash, B.M. and Al-Shami, T.M. and Abdulkareem, F.A. and Padmanabhan, E. and Al-Yaseri, A. (2021) Mechanism of CH4 sorption onto a shale surface in the presence of cationic surfactant. Energy and Fuels, 35 (9). pp. 7943-7955.

Abduljabbar, A. and Mohyaldinn, M. and Younis, O. and Alghurabi, A. (2021) A numerical CFD investigation of sand screen erosion in gas wells: Effect of fine content and particle size distribution. Journal of Natural Gas Science and Engineering, 95.

Abdulkadir, B.A. and Dennis, J.O. and Shukur, M.F.B.A. and Nasef, M.M.E. and Usman, F. (2021) Study on Dielectric Properties of Gel Polymer Electrolyte Based on PVA-K2CO3 Composites. International Journal of Electrochemical Science, 16 (1). pp. 1-15.

Abdulkadir, B.A. and Dennis, J.O. and Al-Hadeethi, Y. and Shukur, M.F.B.A. and Mkawi, E.M. and Al-Harbi, N. and Ibnaouf, K.H. and Aldaghri, O. and Usman, F. and Abbas Adam, A. (2021) Optimization of the electrochemical performance of a composite polymer electrolyte based on pva-k2 co3-sio2 composite. Polymers, 13 (1). pp. 1-24.

Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. (2021) Modelling and multi-objective optimization of the fresh and mechanical properties of self-compacting high volume fly ash ECC (HVFA-ECC) using response surface methodology (RSM). Case Studies in Construction Materials, 14.

Abdulkareem, F.A. and Padmanabhan, E. (2021) Applied techniques for residual oil recovery from source rocks: A review of current challenges and possible developments. Canadian Journal of Chemical Engineering, 99 (1). pp. 251-267.

Abdullah, E.A. and Al-Areeq, N.M. and Al-Masgari, A.A.-S.A. and Barakat, M.K. (2021) PETROPHYSICAL EVALUATION OF THE UPPER QISHN CLASTIC RESERVOIR IN SHARYOOF OILFIELD, SAYUN-MASILAH BASIN, YEMEN. ARPN Journal of Engineering and Applied Sciences, 16 (22). pp. 2375-2394.

Abdullah, L. and Awang, N.A. and Othman, M. (2021) Application of Choquet Integral-Fuzzy Measures for Aggregating Customers' Satisfaction. Advances in Fuzzy Systems, 2021.

Abdullah, M.A. and Badri Albarody, T.M. and Hussein, A.R. (2021) In-situ lattice structure analysis in sp2 hybridization of stable carbon isotopes: Precision modelling of temperature. Physica E: Low-Dimensional Systems and Nanostructures, 134.

Abdullah, M.N. and Mustapha, M. and Sallih, N. and Ahmad, A. and Mustapha, F. and Dahliyanti, A. (2021) Study and use of rice husk ash as a source of aluminosilicate in refractory coating. Materials, 14 (13).

Abdullah, M.R.T.L. and Siraj, S. and Ghazali, Z. (2021) An ism approach for managing critical stakeholder issues regarding carbon capture and storage (Ccs) deployment in developing asian countries. Sustainability (Switzerland), 13 (12).

Abdullah, S.S.S. and Rambli, D.R.A. and Sulaiman, S. and Alyan, E. and Merienne, F. and Diyana, N. (2021) The impact of virtual nature therapy on stress responses: A systematic qualitative review. Forests, 12 (12).

Abdullah, T.A.A. and Zahid, M.S.M. and Ali, W. (2021) A review of interpretable ml in healthcare: Taxonomy, applications, challenges, and future directions. Symmetry, 13 (12).

Abrams, M.B. and Bjaalie, J.G. and Das, S. and Egan, G.F. and Ghosh, S.S. and Goscinski, W.J. and Grethe, J.S. and Kotaleski, J.H. and Ho, E.T.W. and Kennedy, D.N. and Lanyon, L.J. and Leergaard, T.B. and Mayberg, H.S. and Milanesi, L. and MouÄ�ek, R. and Poline, J.B. and Roy, P.K. and Strother, S.C. and Tang, T.B. and Tiesinga, P. and Wachtler, T. and WÃ³jcik, D.K. and Martone, M.E. (2021) Correction to: A Standards Organization for Open and FAIR Neuroscience: the International Neuroinformatics Coordinating Facility (Neuroinformatics, (2021), 10.1007/s12021-020-09509-0). Neuroinformatics.

Abrams, M.B. and Bjaalie, J.G. and Das, S. and Egan, G.F. and Ghosh, S.S. and Goscinski, W.J. and Grethe, J.S. and Kotaleski, J.H. and Ho, E.T.W. and Kennedy, D.N. and Lanyon, L.J. and Leergaard, T.B. and Mayberg, H.S. and Milanesi, L. and MouÄ�ek, R. and Poline, J.B. and Roy, P.K. and Strother, S.C. and Tang, T.B. and Tiesinga, P. and Wachtler, T. and WÃ³jcik, D.K. and Martone, M.E. (2021) A Standards Organization for Open and FAIR Neuroscience: the International Neuroinformatics Coordinating Facility. Neuroinformatics.

Abro, G.E.M. and Zulkifli, S.A.B.M. and Asirvadam, V.S. and Ali, Z.A. (2021) Model-free-based single-dimension fuzzy smc design for underactuated quadrotor uav. Actuators, 10 (8).

Abu Aisheh, Y.I. and Tayeh, B.A. and Alaloul, W.S. and Jouda, A.F. (2021) Barriers of occupational safety implementation in infrastructure projects: Gaza strip case. International Journal of Environmental Research and Public Health, 18 (7).

Abuabdou, S.M.A. and Jaffari, Z.H. and Ng, C.-A. and Ho, Y.-C. and Bashir, M.J.K. (2021) A new polyvinylidene fluoride membrane synthesized by integrating of powdered activated carbon for treatment of stabilized leachate. Water (Switzerland), 13 (16).

Abunowara, M. and Sufian, S. and Bustam, M.A. and Babar, M. and Eldemerdash, U. and Bencini, R. and Ullah, S. and Assiri, M.A. and Al-Sehemi, A.G. and Mukhtar, A. (2021) Experimental and theoretical investigations on kinetic mechanisms of low-pressure CO2 adsorption onto Malaysian coals. Journal of Natural Gas Science and Engineering, 88.

Adebayo, L.L. and Soleimani, H. and Guan, B.H. and Yahya, N. and Ã�chsner, A. and Sabet, M. and Yusuf, J.Y. and Ali, H. (2021) A simple route to prepare Fe3O4@C microspheres as electromagnetic wave absorbing material. Journal of Materials Research and Technology, 12. pp. 1552-1563.

Adebisi, N. and Balogun, A.-L. and Mahdianpari, M. and Min, T.H. (2021) Assessing the impacts of rising sea level on coastal morpho-dynamics with automated high-frequency shoreline mapping using multi-sensor optical satellites. Remote Sensing, 13 (18).

Adebisi, N. and Balogun, A.-L. and Min, T.H. and Tella, A. (2021) Advances in estimating Sea Level Rise: A review of tide gauge, satellite altimetry and spatial data science approaches. Ocean and Coastal Management, 208.

Adebisi, N. and Balogun, A.-L. (2021) A deep-learning model for national scale modelling and mapping of sea level rise in Malaysia: the past, present, and future. Geocarto International.

Adewumi Babatunde, K. and Mamo Negash, B. and Rashik Mojid, M. and Ahmed, T.Y. and Regassa Jufar, S. (2021) Molecular simulation study of CO2/CH4 adsorption on realistic heterogeneous shale surfaces. Applied Surface Science, 543.

Adeyemo, V.E. and Balogun, A.O. and Mojeed, H.A. and Akande, N.O. and Adewole, K.S. (2021) Ensemble-Based Logistic Model Trees for Website Phishing Detection. Communications in Computer and Information Science, 1347. pp. 627-641.

Adnan, N. and Shahrina, M.N. (2021) A comprehensive approach: Diffusion of environment-friendly energy technologies in residential photovoltaic markets. Sustainable Energy Technologies and Assessments, 46.

Adnan, N. and Nordin, S.M. (2021) How COVID 19 effect Malaysian paddy industry? Adoption of green fertilizer a potential resolution. Environment, Development and Sustainability, 23 (6). pp. 8089-8129.

Afolabi, H.K. and Nasef, M.M. and Nordin, N.A.H.M. and Ting, T.M. and Harun, N.Y. and Saeed, A.A.H. (2021) Isotherms, kinetics, and thermodynamics of boron adsorption on fibrous polymeric chelator containing glycidol moiety optimized with response surface method. Arabian Journal of Chemistry, 14 (12).

Afolabi, H.K. and Nasef, M.M. and Hadi Sapiaa, N.A. and Harun, N.Y. and Ting, T.M. and Hui, T.T. (2021) Highly boron-selective adsorbent by radiation induced grafting of N-vinylformamide on polyethylene/polypropylene sheet followed by hydrolysis and glycidol treatment. Radiation Physics and Chemistry, 182.

Ahmad, A. and Sutanto, M.H. and Ahmad, N.R.B. and Bujang, M. and Mohamad, M.E. (2021) The implementation of industrial byproduct in malaysian peat improvement: A sustainable soil stabilization approach. Materials, 14 (23).

Ahmad, A. and Mahmood, H. and Mansor, N. and Iqbal, T. and Moniruzzaman, M. (2021) Ionic liquid assisted polyetheretherketone-multiwalled carbon nanotubes nanocomposites: An environmentally friendly approach. Journal of Applied Polymer Science, 138 (14).

Ahmad, A. and Sakidin, H. and Sari, M.Y.A. and Amin, A.R.M. and Sufahani, S.F. and Rasib, A.W. (2021) NaÃ¯ve Bayes Classification of High-Resolution Aerial Imagery. International Journal of Advanced Computer Science and Applications, 12 (11). pp. 168-177.

Ahmad, I. and Ahmad, M. and Ali, I. (2021) Klinkenberg-corrected and water permeability correlation for a sarawak carbonate field. Fluids, 6 (10).

Ahmad, I.S. and Kassim, A. and Mohamad, H. and Anuar, S.K. and Hasbollah, D.Z. and Taib, A.M. (2021) Distributed optical fibre sensing technique in slope deformation monitoring. Journal of Mines, Metals and Fuels, 69 (8). pp. 96-100.

Ahmad, M. and Ali, I. and Bins Safri, M.S. and Bin Mohammad Faiz, M.A.I. and Zamir, A. (2021) Synergetic effects of graphene nanoplatelets/tapioca starch on water-based drilling muds: Enhancements in rheological and filtration characteristics. Polymers, 13 (16).

Ahmad, M.A. and Samsuri, S. (2021) Biodiesel purification via ultrasonic-assisted solvent-aided crystallization. Crystals, 11 (2). pp. 1-12.

Ahmad, M.N. and Mahmood, A.K. and Hashim, K.F. and Mustakim, F.B. and Selamat, A. and Bajuri, M.Y. and Arshad, N.I. (2021) Artificial intelligence model and correlation for characterization and viscosity measurements of mono & hybrid nanofluids concerned graphene oxide/silica. Journal of Thermal Analysis and Calorimetry, 145 (4). pp. 2209-2224.

Ahmad, M.S. and Ab Rahim, M.H. and Alqahtani, T.M. and Witoon, T. and Lim, J.-W. and Cheng, C.K. (2021) A review on advances in green treatment of glycerol waste with a focus on electro-oxidation pathway. Chemosphere, 276.

Ahmad, M.S. and KlemeÅ¡, J.J. and Alhumade, H. and Elkamel, A. and Mahmood, A. and Shen, B. and Ibrahim, M. and Mukhtar, A. and Saqib, S. and Asif, S. and Bokhari, A. (2021) Thermo-kinetic study to elucidate the bioenergy potential of Maple Leaf Waste (MLW) by pyrolysis, TGA and kinetic modelling. Fuel, 293.

Ahmad, M.S. and Cheng, C.K. and Bhuyar, P. and Atabani, A.E. and Pugazhendhi, A. and Chi, N.T.L. and Witoon, T. and Lim, J.W. and Juan, J.C. (2021) Effect of reaction conditions on the lifetime of SAPO-34 catalysts in methanol to olefins process â�� A review. Fuel, 283.

Ahmad, M.T. and Qaiyum, S. and Alamri, A. and Islam, S. (2021) Performance comparison of different machine learning algorithms on a time-series of covid-19 data: A case study for Saudi Arabia. Journal of Environmental Protection and Ecology, 22 (4). pp. 1662-1675.

Ahmad, N. and Nordin, N.A.H.M. and Jaafar, J. and Ismail, A.F. and Ramli, M.K.N.B. (2021) Significant improvement in antibacterial property of ZIF-8 decorated graphene oxide by post-synthetic modification process. Journal of Environmental Chemical Engineering, 9 (5).

Ahmad Rizal, A.R. and Md Nordin, S. and Hussin, S.H. and Hussin, S.R. (2021) Beyond Rational Choice Theory: Multifaceted Determinants of Participation in Palm Oil Sustainable Certification Amongst Smallholders in Malaysia. Frontiers in Sustainable Food Systems, 5.

Ahmad, R.K. and Sulaiman, S.A. (2021) Carbonization of Coconut Shell Biomass in a Downdraft Reactor: Effect of Temperature on the Charcoal Properties. Sains Malaysiana, 50 (12). pp. 3705-3717.

Ahmad, R.K. and Sulaiman, S.A. and Dol, S.S. and Umar, H.A. (2021) The potential of coconut shells through pyrolysis technology in nigeria. Green Energy and Technology. pp. 151-175.

Ahmed, N. and Siddiqui, N.A. and Ramasamy, N. and Ramkumar, M. and Jamil, M. and Usman, M. and Sajid, Z. and Rahman, A.H.B.A. (2021) Geochemistry of Eocene Bawang Member turbidites of the Belaga Formation, Borneo: Implications for provenance, palaeoweathering, and tectonic setting. Geological Journal, 56 (5). pp. 2477-2499.

Ahmed, N. and Siddiqui, N.A. and Jamil, M. and bin Ismail, M.S. and Mo-hamed Ahmed Salim, A. and Sajid, Z. and Usman, M. and Gul, Z. and Kasim, S.A. and ul Haq, I. and Imran, Q.S. and Haroon Ali, S. (2021) Deep Marine Turbiditic Belaga Formation of Late Cretaceousâ��Late Eocene in Central Sarawak, Malaysia: Implications for Sediment Transport and Distribution of Total Organic Carbon (TOC). Petroleum and Coal, 63 (1). pp. 96-106.

Ahmed, N. and Siddiqui, N.A. and H. B. A. Rahman, A. and Jamil, M. and Usman, M. and Sajid, Z. and Kamal Zaidi, F. (2021) Evaluation of hydrocarbon source rock potential: Deep marine shales of Belaga Formation of Late Cretaceous-Late Eocene, Sarawak, Malaysia. Journal of King Saud University - Science, 33 (1).

Ahmed, R. and Mahadzir, S. and Erniza B Rozali, N. and Biswas, K. and Matovu, F. and Ahmed, K. (2021) Artificial intelligence techniques in refrigeration system modelling and optimization: A multi-disciplinary review. Sustainable Energy Technologies and Assessments, 47.

Ahmed, S.W. and Hussain, G. and Al-Ghamdi, K.A. and Altaf, K. (2021) Mechanical properties of an additive manufactured CF-PLA/ABS hybrid composite sheet. Journal of Thermoplastic Composite Materials, 34 (11). pp. 1577-1596.

Ahn, J. and Shamim, A. and Park, J. (2021) Impacts of cruise industry corporate social responsibility reputation on customersâ�� loyalty: Mediating role of trust and identification. International Journal of Hospitality Management, 92.

Ainuddin, A. and Aziz, N.A.A. and Soom, N.A.A.M. (2021) Condensate banking removal: study on ultrasonic amplitude effect. Journal of Petroleum Exploration and Production Technology, 11 (9). pp. 3559-3569.

Ajab, H. and Khatoon, M. and Yaqub, A. and Gulfaraz, M. and Nawazish, S. and Khan, F.A. and Dennis, J.O. and Junaid, M. (2021) Synthesis of gallus gallus domesticus eggshells and magnetite bio-composite for cr(Vi) removal: Adsorption kinetics, equilibrium isotherms and thermodynamics. Desalination and Water Treatment, 238. pp. 161-173.

Ajmal, M.M. and Khan, M. and Shad, M.K. and AlKatheeri, H. and Jabeen, F. (2021) Socio-economic and technological new normal in supply chain management: lessons from COVID-19 pandemic. International Journal of Logistics Management.

Alaloul, W.S. and Musarat, M.A. and Shawn, L.E. and Al-Yacouby, A.M. and Toloue, I. and Rafiq, W. and Farooq, W. (2021) Multi-nozzle abrasive water jet for oil and gas platforms decommissioning: A review. Civil Engineering and Architecture, 9 (6). pp. 2062-2076.

Alaloul, W.S. and Musarat, M.A. and Haruna, S. and Law, K. and Tayeh, B.A. and Rafiq, W. and Ayub, S. (2021) Mechanical properties of silica fume modified high-volume fly ash rubberized self-compacting concrete. Sustainability (Switzerland), 13 (10).

Alaloul, W.S. and Musarat, M.A. and Rabbani, M.B.A. and Iqbal, Q. and Maqsoom, A. and Farooq, W. (2021) Construction sector contribution to economic stability: Malaysian gdp distribution. Sustainability (Switzerland), 13 (9).

Alaloul, W.S. and Altaf, M. and Musarat, M.A. and Javed, M.F. and Mosavi, A. (2021) Systematic review of life cycle assessment and life cycle cost analysis for pavement and a case study. Sustainability (Switzerland), 13 (8).

Alaloul, W.S. and Musarat, M.A. and Hui, C.J. (2021) Impact of elevated temperature on rubberized concrete: A review. Lecture Notes in Civil Engineering, 132. pp. 421-427.

Alam, M.A. and Ya, H.H. and Azeem, M. and Yusuf, M. and Sapuan, S.M. and Masood, F. (2021) Investigating the effect of mixing time on the crystallite size and lattice strain of the AA7075/TiC composites Einfluss der Mischzeit auf die KristallitgrÃ¶Ã�e und die Gitterverzerrung von AA7075/TiC-Verbundwerkstoffen. Materialwissenschaft und Werkstofftechnik, 52 (10). pp. 1112-1120.

Alam, M.A. and Ya, H.H. and Yusuf, M. and Sivraj, R. and Mamat, O.B. and Sapuan, S.M. and Masood, F. and Parveez, B. and Sattar, M. (2021) Modeling, optimization and performance evaluation of tic/graphite reinforced al 7075 hybrid composites using response surface methodology. Materials, 14 (16).

Alam, M.K. and Aziz, A.A. and Latif, S.A. and Aziz, A.A. (2021) Error-Control Truncated SVD Technique for In-Network Data Compression in Wireless Sensor Networks. IEEE Access, 9. pp. 13829-13844.

Alam, S.S. and Ahmad, M. and Othman, A.S. and Shaari, Z.B.H. and Masukujjaman, M. (2021) Factors affecting photovoltaic solar technology usage intention among households in Malaysia: Model integration and empirical validation. Sustainability (Switzerland), 13 (4). pp. 1-20.

Al-Amin, M. and Abdul-Rani, A.M. and Danish, M. and Zohura, F.T. and Rubaiee, S. and Ahmed, R. and Ali, S. and Sarikaya, M. (2021) Analysis of hybrid HA/CNT suspended-EDM process and multiple-objectives optimization to improve machining responses of 316L steel. Journal of Materials Research and Technology, 15. pp. 2557-2574.

Al-Amin, M. and Abdul-Rani, A.M. and Danish, M. and Rubaiee, S. and Mahfouz, A.B. and Thompson, H.M. and Ali, S. and Unune, D.R. and Sulaiman, M.H. (2021) Investigation of coatings, corrosion and wear characteristics of machined biomaterials through hydroxyapatite mixed-edm process: A review. Materials, 14 (13).

Alani, S. and Zakaria, Z. and Saeidi, T. and Ahmad, A. and Alsariera, H. and Al-Heety, O.S. and Mahmood, S.N. (2021) Electronic bandgap miniaturized UWB antenna for near-field microwave investigation of skin. AIP Advances, 11 (3).

AL-Ashmori, A. and Basri, S. and Dominic, P.D.D. and Muneer, A. and Al-Tashi, Q. and Al-Ashmori, Y. (2021) Blockchain-Oriented Software Development Issues: A Literature Review. Lecture Notes in Networks and Systems, 232 LN. pp. 48-57.

Al-Atesh, E.A. and Rahmawati, Y. and Zawawi, N.A.W.A. and Elmansoury, A. (2021) Developing the Green Building Materials Selection Criteria for Sustainable Building Projects. International Journal on Advanced Science, Engineering and Information Technology, 11 (5). pp. 2112-2120.

Alazzawi, A.K. and Rais, H.M. and Basri, S. and Alsariera, Y.A. and Capretz, L.F. and Imam, A.A. and Balogun, A.O. (2021) HABCSm: A Hamming Based t -way Strategy based on Hybrid Artificial Bee Colony for Variable Strength Test Sets Generation. International Journal of Computers, Communications and Control, 16 (5). pp. 1-18.

Albaghdadi, A.M. and Baharom, M.B. and Sulaiman, S.A. (2021) TriÂplanar balancing optimization of a double crankÂrocker mechanism for shaking forces and shaking moments reduction. Proceedings of the Estonian Academy of Sciences, 70 (3). pp. 286-296.

Aleem, W. and Mellon, N. and Khan, J.A. and Al-Kayiem, H.H. (2021) Experimental investigation and mathematical modeling of oil/water emulsion separation effectiveness containing alkali-surfactant-polymer. Journal of Dispersion Science and Technology, 42 (9). pp. 1286-1298.

Al-Ezzi, A. and Kamel, N. and Faye, I. and Gunaseli, E. (2021) Analysis of default mode network in social anxiety disorder: Eeg resting-state effective connectivity study. Sensors, 21 (12).

Al-Ezzi, A. and Yahya, N. and Kamel, N. and Faye, I. and Alsaih, K. and Gunaseli, E. (2021) Severity Assessment of Social Anxiety Disorder Using Deep Learning Models on Brain Effective Connectivity. IEEE Access, 9. pp. 86899-86913.

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. (2021) On rubberized engineered cementitious composites (R-ECC): A review of the constituent material. Case Studies in Construction Materials, 14.

Algamili, A.S. and Khir, M.H.M. and Dennis, J.O. and Ahmed, A.Y. and Alabsi, S.S. and Ba Hashwan, S.S. and Junaid, M.M. (2021) A Review of Actuation and Sensing Mechanisms in MEMS-Based Sensor Devices. Nanoscale Research Letters, 16 (1).

Al-Gburi, A.J.A. and Ibrahim, I.M. and Zakaria, Z. and Abdulhameed, M.K. and Saeidi, T. (2021) Enhancing gain for uwb antennas using fss: A systematic review. Mathematics, 9 (24).

Alghurabi, A. and Mohyaldinn, M. and Jufar, S. and Younis, O. and Abduljabbar, A. and Azuwan, M. (2021) CFD numerical simulation of standalone sand screen erosion due to gas-sand flow. Journal of Natural Gas Science and Engineering, 85.

Al-Hajri, S. and Negash, B.M. and Rahman, M.M. and Haroun, M. and Al-Shami, T.M. (2021) Effect of Silica Nanoparticles on Polymer Adsorption Reduction on Marcellus Shale. ACS Omega, 6 (44). pp. 29537-29546.

Alhammadi, S.A. and Tayeh, B.A. and Alaloul, W.S. and Salem, T.J. (2021) Risk Management Strategies in Construction Organizations. Open Civil Engineering Journal, 15 (1). pp. 406-413.

Alhawari, A.R.H. and Saeidi, T. and Almawgani, A.H.M. and Hindi, A.T. and Alghamdi, H. and Alsuwian, T. and Awwad, S.A.B. and Imran, M.A. (2021) Wearable metamaterial dual-polarized high isolation uwb mimo vivaldi antenna for 5g and satellite communications. Micromachines, 12 (12).

Alhawari, A.R.H. and Almawgani, A.H.M. and Hindi, A.T. and Alghamdi, H. and Saeidi, T. (2021) Metamaterial-based wearable flexible elliptical UWB antenna for WBAN and breast imaging applications. AIP Advances, 11 (1).

Alhazmi, H. and Loy, A.C.M. (2021) A review on environmental assessment of conversion of agriculture waste to bio-energy via different thermochemical routes: Current and future trends. Bioresource Technology Reports, 14.

Al-Hiyali, M.I. and Yahya, N. and Faye, I. and Khan, Z. (2021) Autism Spectrum Disorder Detection Based on Wavelet Transform of BOLD fMRI Signals Using Pre-trained Convolution Neural Network. International Journal of Integrated Engineering, 13 (5). pp. 49-56.

Alhothali, A. and Haneef, T. and Mustafa, M.R.U. and Moria, K.M. and Rashid, U. and Rasool, K. and Bamasag, O.O. (2021) Optimization of micro-pollutantsâ�� removal from wastewater using agricultural waste-derived sustainable adsorbent. International Journal of Environmental Research and Public Health, 18 (21).

Ali, H. and Soleimani, H. and Yahya, N. and Khodapanah, L. and Kozlowski, G. and Sabet, M. and Demiral, B.M.R. and Adebayo, L.L. and Hussain, T. (2021) Experimental investigation and two-phase flow simulation of oil and nanofluids on micro CT images of sandstone for wettability alteration of the system. Journal of Petroleum Science and Engineering, 204.

Ali, R.F. and Muneer, A. and Dominic, P.D.D. and Taib, S.M. and Ghaleb, E.A.A. (2021) Internet of Things (IoT) Security Challenges and Solutions: A Systematic Literature Review. Communications in Computer and Information Science, 1487 C. pp. 128-154.

Arshad, N.I. and Bosua, R. and Milton, S. and Mahmood, A.K. and Zainal-Abidin, A.I. and Ariffin, M.M. and Aszemi, N.M. (2021) A sustainable enterprise content management technologies use framework supporting agile business processes. Knowledge Management Research and Practice.

Abbasi, A.Z. and Rehman, U. and Ting, D.H. and Quraishi, M.A. (2021) Do pop-up ads in online videogames influence childrenâ��s inspired-to behavior? Young Consumers.

Aliu, O. and Sakidin, H. and Foroozesh, J. (2021) Nanofluid influenced convective heat transfer and nanoparticles dispersion in porous media with a two-phase lattice Boltzmann analysis. Heat Transfer.

Almudhhi, S. and Alostath, M. and Al-Bazzaz, W. and Sharifigaliuk, H. and Qubian, A. (2021) An unconventional approach in investigating wettability contact angle measurement in shale resources. Petroleum Science and Technology.

Aman, A. and Naim, A.M. and Isa, M.Y. and Ali, S.E.A. (2021) Factors affecting sukuk market development: empirical evidence from sukuk issuing economies. International Journal of Islamic and Middle Eastern Finance and Management.

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Wahab, M.W.A. and Haruna, S. (2021) Utilizing of crumb rubber derived recycled scrap tires in masonry application: A review. Materials Science Forum, 1030 M. pp. 73-87.

Awan, A. and Baig, A. and Zubair, M. and Rahdar, A. and Nazar, M.F. and Farooqi, A.S. and Shalan, A.E. and Lanceros-MÃ©ndez, S. and Zafar, M.N. (2021) Green synthesis of molybdenum-based nanoparticles and their applications in energy conversion and storage: A review. International Journal of Hydrogen Energy.

Ali, K. and Johl, S.K. (2021) Soft and hard TQM practices: future research agenda for industry 4.0. Total Quality Management and Business Excellence.

Azeem, A. and Ismail, I. and Jameel, S.M. and Harindran, V.R. (2021) Electrical Load Forecasting Models for Different Generation Modalities: A Review. IEEE Access, 9. pp. 142239-142263.

Ajmal, M.M. and Khan, M. and Shad, M.K. and AlKatheeri, H. and Jabeen, F. (2021) Empirical examination of societal, financial and technology-related challenges amid COVID-19 in service supply chains: evidence from emerging market. International Journal of Logistics Management.

Abdullah, L. and Awang, N.A. and Othman, M. (2021) Application of Choquet Integral-Fuzzy Measures for Aggregating Customers' Satisfaction. Advances in Fuzzy Systems, 2021.

Alpandi, A.H. and Husin, H. and Sidek, A. (2021) A critical review on the development of wax inhibiting agent in facilitating remediation process of contaminated groundwater. Environmental Science and Pollution Research.

Altowayti, W.A.H. and Othman, N. and Shahir, S. and Alshalif, A.F. and Al-Gheethi, A.A. and AL-Towayti, F.A.H. and Saleh, Z.M. and Haris, S.A. (2021) Removal of arsenic from wastewater by using different technologies and adsorbents: a review. International Journal of Environmental Science and Technology.

Al-Qadami, E.H.H. and Mustaffa, Z. and Abdurrasheed, A.S. and Takaijudin, H. and Shah, S.M.H. and Yusof, K.W. (2021) Static and moving vehicles stability criteria inside floodwaters-a review. Engineering Letters, 29 (3). pp. 1264-1276.

Al-Wajih, R. and Abdulkadir, S.J. and Aziz, N. and Al-Tashi, Q. and Talpur, N. (2021) Hybrid binary grey Wolf with Harris hawks optimizer for feature selection. IEEE Access, 9. pp. 31662-31677.

Adebisi, N. and Balogun, A.-L. (2021) A deep-learning model for national scale modelling and mapping of sea level rise in Malaysia: the past, present, and future. Geocarto International.

Asghar Ali, M. and Hooi Ting, D. and Ahmad-ur-Rehman, M. and Zaib Abbasi, A. and Hussain, Z. (2021) Perceived service recovery justice and customer re-patronage intentions: Sequential mediation. Cogent Business and Management, 8 (1).

Alyousifi, Y. and Othman, M. and Almohammedi, A.A. (2021) A Novel Stochastic Fuzzy Time Series Forecasting Model Based on a New Partition Method. IEEE Access, 9. pp. 80236-80252.

Arogundade, A.I. and Megat-Yusoff, P.S.M. and Ahmad, F. and Bhat, A.H. and Afolabi, L.O. (2021) Modification of bauxite residue with oxalic acid for improved performance in intumescent coatings. Journal of Materials Research and Technology, 12. pp. 679-687.

Asghar Ali, M. and Ting, D.H. and Salim, L. and Ahmad-Ur-Rehman, M. (2021) Influence of servicescape on behavioural intentions through mediation and moderation effects: A study on Malaysiaâ��s full-service restaurants. Cogent Business and Management, 8 (1).

Almohamadi, H. and Aljabri, A. and Mahmoud, E.R.I. and Khan, S.Z. and Aljohani, M.S. and Shamsuddin, R. (2021) Catalytic pyrolysis of municipal solid waste: Effects of pyrolysis parameters. Bulletin of Chemical Reaction Engineering & Catalysis, 16 (2). pp. 342-352.

Angadam, J.O. and Ntwampe, S.K.O. and Chidi, B.S. and Lim, J.W. and Okudoh, V.I. (2021) Lignocellulosic waste pretreatment solely via biocatalysis as a partial simultaneous lignino-holocellulolysis process. Catalysts, 11 (6).

Alyousifi, Y. and Othman, M. and Husin, A. and Rathnayake, U. (2021) A new hybrid fuzzy time series model with an application to predict PM10 concentration. Ecotoxicology and Environmental Safety, 227.

Al-Quraishi, M.S. and Elamvazuthi, I. and Tang, T.B. and Al-Qurishi, M. and Parasuraman, S. and Borboni, A. (2021) Multimodal Fusion Approach Based on EEG and EMG Signals for Lower Limb Movement Recognition. IEEE Sensors Journal, 21 (24). pp. 27640-27650.

Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. (2021) Modelling and optimization of the mechanical properties of engineered cementitious composite containing crumb rubber pretreated with graphene oxide using response surface methodology. Construction and Building Materials, 310.

Ali, M.A. and Ting, D.H. and Ahmad-ur-Rahman, M. and Ali, S. and Shear, F. and Mazhar, M. (2021) Effect of Online Reviews and Crowd Cues on Restaurant Choice of Customer: Moderating Role of Gender and Perceived Crowding. Frontiers in Psychology, 12.

Ahmad, R.K. and Sulaiman, S.A. (2021) Carbonization of Coconut Shell Biomass in a Downdraft Reactor: Effect of Temperature on the Charcoal Properties. Sains Malaysiana, 50 (12). pp. 3705-3717.

Al-Gburi, A.J.A. and Ibrahim, I.M. and Zakaria, Z. and Abdulhameed, M.K. and Saeidi, T. (2021) Enhancing gain for uwb antennas using fss: A systematic review. Mathematics, 9 (24).

Abdullah, T.A.A. and Zahid, M.S.M. and Ali, W. (2021) A review of interpretable ml in healthcare: Taxonomy, applications, challenges, and future directions. Symmetry, 13 (12).

Altowayti, W.A.H. and Othman, N. and Tajarudin, H.A. and Al-Dhaqm, A. and Asharuddin, S.M. and Al-Gheethi, A. and Alshalif, A.F. and Salem, A.A. and Md Din, M.F. and Fitriani, N. and Al-Towayti, F.A.H. (2021) Evaluating the pressure and loss behavior in water pipes using smart mathematical modelling. Water (Switzerland), 13 (24).

Arun, G. and Ayoub, M. and Zulqarnain and Deshannavar, U. and Yusoff, M.H.M. and Farrukh, S. and Sher, F. (2021) Valorization of solketal synthesis from sustainable biodiesel derived glycerol using response surface methodology. Catalysts, 11 (12).

Aziz, A.A. and Izhar, L.I. and Asirvadam, V.S. and Tang, T.B. and Ajam, A. and Omar, Z. and Muda, S. (2021) Detection of collaterals from cone-beam CT images in stroke. Sensors, 21 (23).

Anuar, N.A.S.I.K. and Ramli, A. and Wei, L.J. (2021) Synthesis of ce/mgo catalysts for direct oxidation of hibiscus cannabinus stalks to vanillin. Catalysts, 11 (12).

Altowayti, W.A.H. and Othman, N. and Al-Gheethi, A. and Dzahir, N.H.B.M. and Asharuddin, S.M. and Alshalif, A.F. and Nasser, I.M. and Tajarudin, H.A. and Al-Towayti, F.A.H. (2021) Adsorption of Zn2+ from synthetic wastewater using dried watermelon rind (D-WMR): An overview of nonlinear and linear regression and error analysis. Molecules, 26 (20).

Alkarkhi, A.F.M. and Danish, M. and Abu Amr, S.S. and Alqaraghuli, W.A.A. and Ayoub, M. (2021) Evaluation and mechanism of glucose production through acid hydrolysis process: Statistical approach. Biocatalysis and Agricultural Biotechnology, 36.

Arifin, M.H. and Kayode, J.S. and Ismail, M.K.I. and Abdullah, A.M. and Embrandiri, A. and Nazer, N.S.M. and Azmi, A. (2021) A novel method for the quantification of industrial and municipal waste materials for environmental hazard assessment. MethodsX, 8.

Abdullah, M.Z. and Shuaib B M Saheed, M. and Mohammat, M.F. and Salleh, S.N.M. (2021) Preliminary study of cellulose acetate nanofibre produced through the tri-solvent technique. International Journal of Chemical and Biochemical Sciences, 20. pp. 7-10.

Alyan, Emad and Saad, Naufal M and Kamel, Nidal and Yusoff, Mohd Zuki and Zakariya, Mohd Azman and Rahman, Mohammad Abdul and Guillet, Christophe and Merienne, Frederic (2021) Frontal electroencephalogram alpha asymmetry during mental stress related to workplace noise. Sensors, 21 (6). p. 1968.

Al-Amin, Md and Abdul-Rani, Ahmad Majdi and Danish, Mohd and Zohura, Fatema Tuj and Rubaiee, Saeed and Ahmed, Rasel and Ali, Sadaqat and Sarikaya, Murat (2021) Analysis of hybrid HA/CNT suspended-EDM process and multiple-objectives optimization to improve machining responses of 316L steel. Journal of Materials Research and Technology, 15. pp. 2557-2574.

Al-Amin, Md and Abdul-Rani, Ahmad Majdi and Ahmed, Rasel and Rao, TVVLN (2021) Multiple-objective optimization of hydroxyapatite-added EDM technique for processing of 316L-steel. Materials and Manufacturing Processes, 36 (10). pp. 1134-1145.

Al-Amin, Md and Abdul-Rani, Ahmad Majdi and Ahmed, Rasel and Shahid, Muhammad Umair and Zohura, Fatema Tuj and Rani, Muhammad Danial Bin Abd (2021) Multi-objective optimization of process variables for MWCNT-added electro-discharge machining of 316L steel. The International Journal of Advanced Manufacturing Technology, 115 (1-2). pp. 179-198.

Al-Amin, Md and Abdul-Rani, Ahmad Majdi and Danish, Mohd and Rubaiee, Saeed and Mahfouz, Abdullah bin and Thompson, Harvey M and Ali, Sadaqat and Unune, Deepak Rajendra and Sulaiman, Mohd Hafis (2021) Investigation of coatings, corrosion and wear characteristics of machined biomaterials through hydroxyapatite mixed-EDM process: a review. Materials, 14 (13). p. 3597.

Ali, Sadaqat and Irfan, Muhammad and Muhammad Niazi, Usama and Rani, Ahmad Majdi Abdul and Shah, Imran and Legutko, Stanislaw and Rahman, Saifur and Jalalah, Mohammed and Alsaiari, Mabkhoot A and Glowacz, Adam and others (2021) Synthesis, surface nitriding and characterization of Ti-Nb modified 316L stainless steel alloy using powder metallurgy. Materials, 14 (12). p. 3270.

Azam, Farooq I and Rani, Ahmad Majdi Abdul and Razak, Muhammad Alâ��Hapis Abdul and Ali, Sadaqat and Aliyu, Abdulâ��azeez Abdu (2021) Additive Manufacturing Processes, Challenges and Applications: A Review. Progress in Engineering Technology III. pp. 93-111.

Abd Aziz, Azrina and Izhar, Lila Iznita and Asirvadam, Vijanth Sagayan and Tang, Tong Boon and Ajam, Azimah and Omar, Zaid and Muda, Sobri (2021) Detection of collaterals from cone-beam CT images in stroke. Sensors, 21 (23). p. 8099.

Al-Quraishi, Maged S and Elamvazuthi, Irraivan and Tang, Tong Boon and Al-Qurishi, Muhammad and Parasuraman, S and Borboni, Alberto (2021) Multimodal fusion approach based on EEG and EMG signals for lower limb movement recognition. IEEE Sensors Journal, 21 (24). pp. 27640-27650.

Al-Quraishi, Maged S and Elamvazuthi, Irraivan and Tang, Tong Boon and Al-Qurishi, Muhammad and Adil, Syed Hasan and Ebrahim, Mansoor (2021) Bimodal data fusion of simultaneous measurements of EEG and fNIRS during lower limb movements. Brain Sciences, 11 (6). p. 713.

Ashour, Abshir and Mohamad, Taib Iskandar and Sopian, Kamaruzzaman and Ludin, Norasikin Ahmad and Alzahrani, Khaled and Ibrahim, Adnan (2021) Performance optimization of a photovoltaic-diesel hybrid power system for Yanbu, Saudi Arabia. AIMS Energy, 9 (6).

Ashour, Abshir M and Mohamad, Taib Iskandar and Azeem, Syed Mohammad and Thomas, Selvin P and Aina, Yusuf A and Sopian, Kamaruzzaman and Ibrahim, Adnan (2021) Deployment of Rooftop Solar Photovoltaic Electrification for Residential Buildings in an Industrial City: A Study on Public Perception and Acceptance. Int. J. Renew. Energy Res, 11 (2). pp. 945-951.

Aamir, Muhammad and Ahmad, Waleed and Ahmad, Bashir and Khan, Abdurrehman and Fawad, Muhammad and Abdullah, Muhammad (2021) PREVALENCE OF MORTALITY AND ITS DISTRIBUTION BY SEX AND AGE GROUPS IN INDOOR COVID-19 PATIENTS IN DI KHAN DIVISION, PAKISTAN. Gomal Journal of Medical Sciences, 19 (3). pp. 91-97.

Abdullah, Muhammad Ridhuan Tony Lim and Siraj, Saedah and Ghazali, Zulkipli (2021) An ISM approach for managing critical stakeholder issues regarding carbon capture and storage (CCS) deployment in developing Asian countries. Sustainability, 13 (12). p. 6618.

Ahmad, Asmala and Sakidin, Hamzah and Sari, Mohd Yazid Abu and Sufahani, Suliadi Firdaus and others (2021) Na\"ıve Bayes classification of high-resolution aerial imagery. International Journal of Advanced Computer Science and Applications, 12 (11).

B

Bashiri, Robabeh and Irfan, Muhammad Syahmi and Mohamed, Norani Muti and Sufian, Suriati and Ling, Liew Yi and Suhaimi, Nur Amirah and Samsudin, Mohamad Fakhrul Ridhwan (2021) Hierarchically SrTiO3@ TiO2@ Fe2O3 nanorod heterostructures for enhanced photoelectrochemical water splitting. International Journal of Hydrogen Energy, 46 (48). pp. 24607-24619.

Bashir, Ahsan and Zulkifli, Saiful A and Aziz, Abd Rashid Abd and Abidin, Ezrann ZZ (2021) Impact of combustion variance on sustainability of free-piston linear generator during steady-state generation. Energies, 14 (14). p. 4081.

binti Rosdin, Rose Diyanah and Yusuf, Mohammad and Abdullah, Bawadi (2021) Dry reforming of methane over Ni-based catalysts: Effect of ZrO2 and MgO addition as support. Materials Letters: X, 12. p. 100095.

Barambu, Nafiu Umar and Bilad, Muhammad Roil and Laziz, Afiq Mohd and Nordin, Nik Abdul Hadi Md and Bustam, Mohamad Azmi and Shamsuddin, Norazanita and Khan, Asim Laeeq (2021) A wavy flow channel system for membrane fouling control in oil/water emulsion filtration. Journal of Water Process Engineering, 44. p. 102340.

Bashir, Farzana and Irfan, Muhammad and Ahmad, Tausif and Iqbal, Javed and Butt, Muhammad Tahir and Sadef, Yumna and Umbreen, Misbah and Shaikh, Irfan Ahmed and Moniruzzaman, Muhammad (2021) Efficient utilization of low cost agro materials for incorporation of copper nanoparticles to scrutinize their antibacterial properties in drinking water. Environmental Technology & Innovation, 21. p. 101228.

Barham, A. and Ismail, M.S. and Hermana, M. and Padmanabhan, E. and Baashar, Y. and Sabir, O. (2021) Predicting the maturity and organic richness using artificial neural networks (ANNs): A case study of Montney Formation, NE British Columbia, Canada. Alexandria Engineering Journal, 60 (3). pp. 3253-3264.

Buniya, M.K. and Othman, I. and Sunindijo, R.Y. and Kineber, A.F. and Mussi, E. and Ahmad, H. (2021) Barriers to safety program implementation in the construction industry. Ain Shams Engineering Journal, 12 (1). pp. 65-72.

Bukhari, H. and Alaloul, W.S. and Musarat, M.A. and Akram, S. and Tabassum, I. and Altaf, M. (2021) Materializing low-cost energy-efficient residential utility through effective space design and masonry technique-a practical approach. Civil Engineering and Architecture, 9 (2). pp. 357-374.

Bheel, N. (2021) Basalt fibre-reinforced concrete: review of fresh and mechanical properties. Journal of Building Pathology and Rehabilitation, 6 (1).

Bashir, F. and Rehman, M. and Amin, A. and Shamim, A. and Hashmani, M. (2021) Cyberbullying Behaviour: A study of Undergraduate University Students. IEEE Access.

Belhaj, A.F. and Elraies, K.A. and Alnarabiji, M.S. and Abdul Kareem, F.A. and Shuhli, J.A. and Mahmood, S.M. and Belhaj, H. (2021) Experimental investigation, binary modelling and artificial neural network prediction of surfactant adsorption for enhanced oil recovery application. Chemical Engineering Journal, 406.

Baloo, L. and Isa, M.H. and Sapari, N.B. and Jagaba, A.H. and Wei, L.J. and Yavari, S. and Razali, R. and Vasu, R. (2021) Adsorptive removal of methylene blue and acid orange 10 dyes from aqueous solutions using oil palm wastes-derived activated carbons. Alexandria Engineering Journal, 60 (6). pp. 5611-5629.

Bakar, M.A.A. and Mustaffa, Z. and Idris, N.N. and Ben Seghier, M.E.A. (2021) Experimental program on the burst capacity of reinforced thermoplastic pipe (RTP) under impact of quasi-static lateral load. Engineering Failure Analysis, 128.

Bashir, A. and Zulkifli, S.A. and Abd Aziz, A.R. and Abidin, E.Z.Z. (2021) Impact of combustion variance on sustainability of free-piston linear generator during steady-state generation. Energies, 14 (14).

Bukhari, H. and Thaheem, M.J. and Musarat, M.A. and Alaloul, W.S. and Altaf, M. (2021) Are Pakistani construction professionals truly happy? A benchmarking approach. Ain Shams Engineering Journal.

Bheel, N. and Ibrahim, M.H.W. and Adesina, A. and Kennedy, C. and Shar, I.A. (2021) Mechanical performance of concrete incorporating wheat straw ash as partial replacement of cement. Journal of Building Pathology and Rehabilitation, 6 (1).

Bheel, N. and Sohu, S. and Awoyera, P. and Kumar, A. and Abbasi, S.A. and Olalusi, O.B. (2021) Effect of Wheat Straw Ash on Fresh and Hardened Concrete Reinforced with Jute Fiber. Advances in Civil Engineering, 2021.

Balogun, A.O. and Basri, S. and Mahamad, S. and Abdulkadir, S.J. and Capretz, L.F. and Imam, A.A. and Almomani, M.A. and Adeyemo, V.E. and Kumar, G. (2021) Empirical analysis of rank aggregation-based multi-filter feature selection methods in software defect prediction. Electronics (Switzerland), 10 (2). pp. 1-16.

Bukhari, S.N. and Chong, C.C. and Setiabudi, H.D. and Cheng, Y.W. and Teh, L.P. and Jalil, A.A. (2021) Ni/Fibrous type SBA-15: Highly active and coke resistant catalyst for CO2 methanation. Chemical Engineering Science, 229.

Bangash, K.A. and Kazmi, S.A.A. and Farooq, W. and Ayub, S. and Musarat, M.A. and Alaloul, W.S. and Javed, M.F. and Mosavi, A. (2021) Thickness optimization of thin-film tandem organic solar cell. Micromachines, 12 (5).

Band, S.S. and Taherei Ghazvinei, P. and bin Wan Yusof, K. and Hossein Ahmadi, M. and Nabipour, N. and Chau, K.-W. (2021) Evaluation of the accuracy of soft computing learning algorithms in performance prediction of tidal turbine. Energy Science and Engineering, 9 (5). pp. 633-644.

Babar, M. and Mukhtar, A. and Mubashir, M. and Saqib, S. and Ullah, S. and Quddusi, A.H.A. and Bustam, M.A. and Show, P.L. (2021) Development of a novel switched packed bed process for cryogenic CO2 capture from natural gas. Process Safety and Environmental Protection, 147. pp. 878-887.

Baloo, L. and Kankia, M.U. and Wei, O.J. (2021) Usage of seaweed as a biocomposite material in green construction. Lecture Notes in Civil Engineering, 132. pp. 127-138.

Bin Md Hafiz, M.F.U. and Mohamed Kutty, S.R.B. and Hakmi, S.N.B.S.I. (2021) Impact of treating ammonia-nitrogen contamination from chemical fertilizer plant using extended aeration activated sludge system. Lecture Notes in Civil Engineering, 132. pp. 163-173.

Bhattacharjee, S. and Chakkaravarhty, D.M. and Chakkaravarty, M. and Rahim, L.B.A. and Ramadhani, A.W. (2021) A GPU Unified Platform to Secure Big Data Transportation Using an Error-Prone Elliptic Curve Cryptography. Advances in Intelligent Systems and Computing, 1174. pp. 263-280.

Buniya, M.K. and Othman, I. and Sunindijo, R.Y. and Kineber, A.F. and Alnsour, M. (2021) Elements of Safety Program Implementation in Developing Countries Construction Industries. Lecture Notes in Civil Engineering, 139 LN. pp. 85-91.

Bakthavatchalam, B. and Habib, K. and Bakthavatchalam, P. and Keerthana, B. and Thulasiraman, S. and Pongiannan, R.K. (2021) Stability and Thermal Conductivity Evaluation of Less Concentration Surfactant Wrapped Functionalized Graphene Dispersed in Ethylene Glycol. Lecture Notes in Mechanical Engineering. pp. 318-326.

Bakthavatchalam, B. and Habib, K. (2021) Thermoelectric air conditioners for tropical countries. Green Energy and Technology. pp. 289-307.

Biswas, K. and Vasant, P. and Vintaned, J.A.G. and Watada, J. and Roy, A. and Sokkalingam, R. (2021) A Hybrid Metaheuristic Algorithm for Truss Structure Domainâ��s Optimization Problem. Studies in Systems, Decision and Control, 319. pp. 21-34.

Barambu, N.U. and Bilad, M.R. and Bustam, M.A. and Kurnia, K.A. and Othman, M.H.D. and Nordin, N.A.H.M. (2021) Development of membrane material for oily wastewater treatment: A review. Ain Shams Engineering Journal, 12 (2). pp. 1361-1374.

Babiker, A. and Baashar, Y. and Alkahtani, A.A. and Faye, I. and Alkawsi, G. (2021) Towards detection of interest using physiological sensors. Applied Sciences (Switzerland), 11 (3). pp. 1-28.

Bin Meor Razali, A.M.M.F. and Awang, M. and Emamian, S.S. (2021) Preface. Lecture Notes in Civil Engineering, 139 LN.

Barambu, Nafiu Umar and Bilad, Muhammad Roil and Huda, Nurul and Nordin, Nik Abdul Hadi Md and Bustam, Mohamad Azmi and Doyan, Aris and Roslan, Jumardi (2021) Effect of membrane materials and operational parameters on performance and energy consumption of oil/water emulsion filtration. Membranes, 11 (5). p. 370.

Balogun, A.O. and Adewole, K.S. and Bajeh, A.O. and Jimoh, R.G. (2021) Cascade Generalization Based Functional Tree for Website Phishing Detection. Communications in Computer and Information Science, 1487 C. pp. 288-306.

Bheel, N. and Awoyera, P. and Shar, I.A. and Sohu, S. and Abbasi, S.A. and Krishna Prakash, A. (2021) Mechanical Properties of Concrete Incorporating Rice Husk Ash and Wheat Straw Ash as Ternary Cementitious Material. Advances in Civil Engineering, 2021.

Balogun, A.O. and Basri, S. and Mahamad, S. and Capretz, L.F. and Imam, A.A. and Almomani, M.A. and Adeyemo, V.E. and Kumar, G. (2021) A novel rank aggregation-based hybrid multifilter wrapper feature selection method in software defect prediction. Computational Intelligence and Neuroscience, 2021.

Balogun, A.O. and Mojeed, H.A. and Adewole, K.S. and Akintola, A.G. and Salihu, S.A. and Bajeh, A.O. and Jimoh, R.G. (2021) Optimized Decision Forest for Website Phishing Detection. Lecture Notes in Networks and Systems, 231 LN. pp. 568-582.

Balogun, A.O. and Akande, N.O. and Usman-Hamza, F.E. and Adeyemo, V.E. and Mabayoje, M.A. and Ameen, A.O. (2021) Rotation Forest-Based Logistic Model Tree for Website Phishing Detection. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 12957 . pp. 154-169.

Bukhari, H. and Ali Musarat, M. and Alaloul, W.S. and Altaf, M. (2021) Human resource management (Hrm) practices in construction organizations: A review. International Review of Civil Engineering, 12 (4). pp. 255-263.

Barambu, N.U. and Bilad, M.R. and Huda, N. and Nordin, N.A.H.M. and Bustam, M.A. and Doyan, A. and Roslan, J. (2021) Effect of membrane materials and operational parameters on performance and energy consumption of oil/water emulsion filtration. Membranes, 11 (5).

Bheel, N. and Awoyera, P. and Tafsirojjaman, T. and Hamah Sor, N. and sohu , S. (2021) Synergic effect of metakaolin and groundnut shell ash on the behavior of fly ash-based self-compacting geopolymer concrete. Construction and Building Materials, 311.

Basith, M.S.A. and Sallih, N. and Soon, W.P.K. and Shibano, S.T. and Singh, R. and Sulong, M.A. (2021) Effects of selection of inlet perturbations, multiphase and turbulence equations on slug flow characteristics using altairÂ® acusolveâ�¢. Processes, 9 (12).

Bilal, M. and Shahzad, M. and Arif, M. and Ullah, B. and Hisham, S.B. and Ali, S.S.A. (2021) Annual cost and loss minimization in a radial distribution network by capacitor allocation using pso. Applied Sciences (Switzerland), 11 (24).

Babasafari, A.A. and Rezaei, S. and Sambo, C. and Bashir, Y. and Ghosh, D.P. and Salim, A.M.A. and Yusoff, W.I.W. and Kazemeini, S.H. and Kordi, M. (2021) Practical workflows for monitoring saturation and pressure changes from 4D seismic data: A case study of Malay Basin. Journal of Applied Geophysics, 195.

Bheel, N. and Awoyera, P. and Shar, I.A. and Abbasi, S.A. and Khahro, S.H. and Prakash A, K. (2021) Synergic effect of millet husk ash and wheat straw ash on the fresh and hardened properties of Metakaolin-based self-compacting geopolymer concrete. Case Studies in Construction Materials, 15.

Balogun, A.-L. and Tella, A. and Baloo, L. and Adebisi, N. (2021) A review of the inter-correlation of climate change, air pollution and urban sustainability using novel machine learning algorithms and spatial information science. Urban Climate, 40.

Barambu, N.U. and Bilad, M.R. and Laziz, A.M. and Nordin, N.A.H.M. and Bustam, M.A. and Shamsuddin, N. and Khan, A.L. (2021) A wavy flow channel system for membrane fouling control in oil/water emulsion filtration. Journal of Water Process Engineering, 44.

Bokhoeva, L.A. and Baldanov, A.B. and Rogov, V.E. and Chermoshentseva, A.S. and Ameen, T. (2021) THE EFFECT OF THE ADDITION OF NANOPOWDERS ON THE STRENGTH OF MULTILAYER COMPOSITE MATERIALS Ð�Ð»Ð¸Ñ�Ð½Ð¸Ðµ Ð´Ð¾Ð±Ð°Ð²Ð»ÐµÐ½Ð¸Ñ� Ð½Ð°Ð½Ð¾Ð¿Ð¾Ñ�Ð¾Ñ�ÐºÐ¾Ð² Ð½Ð° Ð¿Ñ�Ð¾Ñ�Ð½Ð¾Ñ�Ñ�Ñ� Ð¼Ð½Ð¾Ð³Ð¾Ñ�Ð»Ð¾Ð¹Ð½Ñ�Ñ ÐºÐ¾Ð¼Ð¿Ð¾Ð·Ð¸Ñ�Ð½Ñ�Ñ Ð¼Ð°Ñ�ÐµÑ�Ð¸Ð°Ð»Ð¾Ð². Industrial Laboratory. Materials Diagnostics, 87 (8). pp. 42-50.

Baharudin, Dayana Mastura and Marimuthu, Maran and Shahimi, Suhaily and others (2021) The Integrated Business Model's Contributory Role Towards Financial Performance: Women Directorsââ�¬â�¢ One Third Presence. Business Management and Strategy, 12 (2). pp. 1-18.

Baharudin, Dayana Mastura and Marimuthu, Maran and others (2021) Synergistic Integrated Business Model-Sustainability-Technology of Top Malaysian Oil and Gas PLCs: The Moderating Role of United Nations SDG 5. Business Management and Strategy, 12 (2). pp. 83-106.

bt Ghazali, Noor Sahlawaty and Marimuthu, Maran (2021) BEHAVIOUR OF STOCK MARKET DURING THE COVID-19 PANDEMIC: THE MALAYSIAN EXPERIENCE. Finance & Accounting Research Journal, 3 (4). pp. 67-74.

C

Chowdhury, Md Raihan and Moshikur, Rahman Md and Wakabayashi, Rie and Moniruzzaman, Muhammad and Goto, Masahiro (2021) Biocompatible ionic liquids assisted transdermal co-delivery of antigenic protein and adjuvant for cancer immunotherapy. International Journal of Pharmaceutics, 601. p. 120582.

Chong, C.K. and Ho, E.T.W. (2021) Synthesis of 3D MRI Brain Images with Shape and Texture Generative Adversarial Deep Neural Networks. IEEE Access, 9. pp. 64747-64760.

Chandrasekaran, S. and Uddin, S.A. and Wahab, M. (2021) Dynamic Analysis of Semi-submersible Under the Postulated Failure of Restraining System with Buoy. International Journal of Steel Structures, 21 (1). pp. 118-131.

Cai, Z. and Topa, A. and Djukic, L.P. and Herath, M.T. and Pearce, G.M.K. (2021) Evaluation of rigid body force in liquid sloshing problems of a partially filled tank: Traditional CFD/SPH/ALE comparative study. Ocean Engineering, 236.

Chui, K.T. and Gupta, B.B. and Vasant, P. (2021) A genetic algorithm optimized RNN-LSTM model for remaining useful life prediction of turbofan engine. Electronics (Switzerland), 10 (3). pp. 1-15.

Chin, J.-C. and Fong, W.C.W. and Lee, K.-Q. and Ng, C.-Y. and Lee, K.M. and Tey, W.Y. and Kang, H.-S. (2021) Interaction of wave-induced motion and bioelectricity generation for floating microalgal biophotovoltaic system. Lecture Notes in Civil Engineering, 132. pp. 266-273.

Cheng, Y.W. and Chong, C.C. and Lam, M.K. and Leong, W.H. and Chuah, L.F. and Yusup, S. and Setiabudi, H.D. and Tang, Y. and Lim, J.W. (2021) Identification of microbial inhibitions and mitigation strategies towards cleaner bioconversions of palm oil mill effluent (POME): A review. Journal of Cleaner Production, 280.

Chin, K.T. and Arumugam, T. and Karuppanan, S. and Ovinis, M. (2021) Failure pressure prediction of pipeline with single corrosion defect using artificial neural network. Science and Technologies: Oil and Oil Products Pipeline Transportation, 11 (2). pp. 166-171.

Chen, C.-H. and Shyu, K.-K. and Lu, C.-K. and Jao, C.-W. and Lee, P.-L. (2021) Classification of prefrontal cortex activity based on functional near-infrared spectroscopy data upon olfactory stimulation. Brain Sciences, 11 (6).

Cheng, Y.W. and Lim, J.S.M. and Chong, C.C. and Lam, M.K. and Lim, J.W. and Tan, I.S. and Foo, H.C.Y. and Show, P.L. and Lim, S. (2021) Unravelling CO2 capture performance of microalgae cultivation and other technologies via comparative carbon balance analysis. Journal of Environmental Chemical Engineering, 9 (6).

Chong, J.W.R. and Khoo, K.S. and Yew, G.Y. and Leong, W.H. and Lim, J.W. and Lam, M.K. and Ho, Y.-C. and Ng, H.S. and Munawaroh, H.S.H. and Show, P.L. (2021) Advances in production of bioplastics by microalgae using food waste hydrolysate and wastewater: A review. Bioresource Technology, 342.

Chuah, L.F. and Bokhari, A. and Yusup, S. and KlemeÅ¡, J.J. and Akbar, M.M. and Saminathan, S. (2021) Correction to: Optimisation on pretreatment of kapok seed (Ceiba pentandra) oil via esterification reaction in an ultrasonic cavitation reactor (Biomass Conversion and Biorefinery, (2017), 7, 1, (91-99), 10.1007/s13399-016-0207-9). Biomass Conversion and Biorefinery, 11 (6). p. 3071.

Cheng, C.K. and Lim, J.-W. and Adhikari, S. (2021) Converting solid biomass waste into nanomaterial for the treatment of hazardous waste. Chemosphere, 285.

Chai, Y.H. and Mohamed, M. and Cheng, Y.W. and Chin, B.L.F. and Yiin, C.L. and Yusup, S. and Lam, M.K. (2021) A review on potential of biohydrogen generation through waste decomposition technologies. Biomass Conversion and Biorefinery.

D

Dabbaghi, M.F. and Baharom, M.B. and Abdul Karim, Z.A. and A. Aziz, A.R. and Mohammed, S.E. and Zainal A., E.Z. (2021) Comparative evaluation of different heat transfer correlations on a single curved-cylinder spark ignition crank-rocker engine. Alexandria Engineering Journal, 60 (3). pp. 2963-2978.

Deshannavar, U.B. and Marappagounder, R. (2021) Revisiting Threshold Fouling Models for Crude Oil Fouling. Heat Transfer Engineering, 42 (17). pp. 1489-1505.

Daud, H. and Mohd Aris, M.N. and Mohd Noh, K.A. and Dass, S.C. (2021) A novel methodology for hydrocarbon depth prediction in seabed logging: Gaussian process-based inverse modeling of electromagnetic data. Applied Sciences (Switzerland), 11 (4). pp. 1-20.

Dol, S.S. and Yong, T.H. and Chan, H.B. and Wee, S.K. and Sulaiman, S.A. (2021) Turbulence characteristics of the flexible circular cylinder agitator. Fluids, 6 (7).

Dahy, E. and Shafie, A. and Yahya, N. (2021) Electric Field Behavior in Time Domain forÂ Semicircle Antenna in Homogeneous Multi Layered Media. Studies in Systems, Decision and Control, 319. pp. 35-51.

Draman, N.N.C. and Karim, S.A.A. and Hashim, I. (2021) C1 Surface Interpolation Using Quartic Rational Triangular Patches. Studies in Systems, Decision and Control, 320. pp. 89-99.

Draman, N.N.C. and Karim, S.A.A. and Hashim, I. and Ping, Y.W. (2021) Rainfall Scattered Data Interpolation Using Rational Quartic Triangular Patches. Studies in Systems, Decision and Control, 319. pp. 1-19.

Devan, P.A.M. and Hussin, F.A. and Ibrahim, R. and Bingi, K. and Khanday, F.A. (2021) A survey on the application of wirelesshart for industrial process monitoring and control. Sensors, 21 (15).

Doyan, Aris and Barambu, Nafiu Umar and Bilad, Muhammad Roil and Huda, Nurul and Nordin, Nik Abdul Hadi Md and Bustam, Mohamad Azmi and Roslan, Jumardi (2021) CA2: Effect of Membrane Materials and Operational Parameters on Performance and Energy Consumption of Oil/Water Emulsion Filtration. Membranes, 11. pp. 1-13.

Daha, M.Y. and Zahid, M.S.M. and Isyaku, B. and Alashhab, A.A. (2021) CDRA: A Community Detection based Routing Algorithm for Link Failure Recovery in Software Defined Networks. International Journal of Advanced Computer Science and Applications, 12 (11). pp. 712-722.

Draz, U. and Ali, T. and Yasin, S. and Hussain, A. and Bukhari, S. and Nawaz, A. and Ali, A. and Khan, M.S. and Jung, L.T. (2021) A novel layer by layer energy efficient watchman algorithm for wireless sensor and actor networks. Romanian Journal of Information Science and Technology, 24 (3). pp. 284-298.

Dong, Y. and Satti, I. and Hermana, M. and Chen, X. (2021) Structural characteristics of transtensional fault system and its implication for hydrocarbon accumulation in s block, south asia area. Turkish Journal of Earth Sciences, 30 (7). pp. 899-915.

Doss, A.S.A. and Venkatesh, D. and Ovinis, M. (2021) Simulation and Experimental Studies of A Mobile Robot for Underwater Applications. International Journal of Robotics and Automation, 36 (1). pp. 10-17.

Dar, Q.U.Z. and Renhai, P. and Sajid, Z. and Mehmood, M. and Wahab, A. and Khan, M.J. and Latif, T. (2021) The Provenance and Tectonic Settings of the Greywacke Member of the Late Neoproterozoic Hazara Formation Lesser Himalayas, Northern Pakistan: Evidence from Geochemistry and Petrography. Sains Malaysiana, 50 (12). pp. 3505-3522.

Das, L. and Rubbi, F. and Habib, K. and Saidur, R. and Islam, N. and Saha, B.B. and Aslfattahi, N. and Irshad, K. (2021) Hydrothermal performance improvement of an inserted double pipe heat exchanger with Ionanofluid. Case Studies in Thermal Engineering, 28.

Danso, D.K. and Negash, B.M. and Yekeen, N. and Khan, J.A. and Rahman, M.T. and Ibrahim, A.U. (2021) Potential valorization of granitic waste material as microproppant for induced unpropped microfractures in shale. Journal of Natural Gas Science and Engineering, 96.

de Azevedo, A.R.G. and Marvila, M.T. and Ali, M. and Khan, M.I. and Masood, F. and Vieira, C.M.F. (2021) Effect of the addition and processing of glass polishing waste on the durability of geopolymeric mortars. Case Studies in Construction Materials, 15.

Danso, D.K. and Negash, B.M. and Ahmed, T.Y. and Yekeen, N. and Omar Ganat, T.A. (2021) Recent advances in multifunctional proppant technology and increased well output with micro and nano proppants. Journal of Petroleum Science and Engineering, 196.

Dalha, I.B. and Said, M.A. and Abdul Karim, Z.A. and El-Adawy, M. (2021) Effects of port mixing and high carbon dioxide contents on power generation and emission characteristics of biogas-diesel RCCI combustion. Applied Thermal Engineering, 198.

Daud, N.A.A. and Shamsuddin, M.R. and Pradanawati, S.A. and Rabat, N.E. (2021) Preparation, characterization and performance evaluation of fly ash-based composite geopolymer membranes for methylene blue dye removal. Science, Engineering and Health Studies, 15.

E

Elgharbawy, Amal AM and Alam, MD Zahangir and Moniruzzaman, Muhammad and Ahmad Kabbashi, Nassereldeen and Jamal, Parveen (2021) High yield of second-generation ethanol in an ionic Liquid-Cellulase integrated system for single-step processing of empty fruit bunch. Biofuels, 12 (7). pp. 817-828.

Elgharbawy, Amal AM and Moniruzzaman, Muhammad and Goto, Masahiro (2021) Facilitating enzymatic reactions by using ionic liquids: A mini review. Current Opinion in Green and Sustainable Chemistry, 27. p. 100406.

Elgharbawy, Amal AM and Putra, Sharifah Shahira Syed and Alam, Md Zahangir and Moniruzzaman, Muhammad and Kabbashi, Nassereldeen Ahmad and Jamal, Parveen (2021) Role of Ionic Liquids in the Processing of Lignocellulosic Biomass. Multifaceted Protocols in Biotechnology, Volume 2. pp. 35-62.

Elgharbawy, Amal AM and Alam, Md Zahangir and Moniruzzaman, Muhammad and Kabbashi, Nassereldeen Ahmad and Jamal, Parveen (2021) Role of Ionic Liquids in the Enzyme Stabilization: A Case Study with Trichoderma Ressie Cellulase. Multifaceted Protocols in Biotechnology, Volume 2. pp. 23-34.

Ejaz, M.M. and Tang, T.B. and Lu, C.-K. (2021) Vision-Based Autonomous Navigation Approach for a Tracked Robot Using Deep Reinforcement Learning. IEEE Sensors Journal, 21 (2). pp. 2230-2240.

Ejaz, F. and Pao, W. and Ali, H.M. (2021) Numerical evaluation of separation efficiency in the diverging T-junction for slug flow. International Journal of Numerical Methods for Heat and Fluid Flow.

Elfaki, M. and Nasif, M.S. and Muhammad, M. (2021) Effect of changing crude oil grade on slug characteristics and flow induced mechanical stresses in pipes. Applied Sciences (Switzerland), 11 (11).

El-Adawy, M. and Heikal, M.R. and Rashid A. Aziz, A. and Adewale Opatola, R. (2021) Stereoscopic particle image velocimetry for engine flow measurements: Principles and applications. Alexandria Engineering Journal, 60 (3). pp. 3327-3344.

Ean, L.W. and Malek, M.A. and Mohammed, B.S. and Tang, C.-W. and Ng, C.Y. (2021) Study of c-s-h formation of cemented sediment brick. Lecture Notes in Civil Engineering, 132. pp. 501-509.

Ejaz, F. and Pao, W. and Shakir Nasif, M. and Saieed, A. and Memon, Z.Q. and Nuruzzaman, M. (2021) A review: Evolution of branching T-junction geometry in terms of diameter ratio, to improve phase separation. Engineering Science and Technology, an International Journal, 24 (5). pp. 1211-1223.

Elgharbawy, A.A.M. and Alam, M.D.Z. and Moniruzzaman, M. and Ahmad Kabbashi, N. and Jamal, P. (2021) High yield of second-generation ethanol in an ionic Liquid-Cellulase integrated system for single-step processing of empty fruit bunch. Biofuels, 12 (7). pp. 817-828.

Ejaz, M.M. and Tang, T.B. and Lu, C.-K. (2021) A fast learning approach for autonomous navigation using a deep reinforcement learning method. Electronics Letters.

Eu, Chin Yii and Tang, Tong Boon and Lin, Cheng-Hung and Lee, Lok Hua and Lu, Cheng-Kai (2021) Automatic Polyp Segmentation in Colonoscopy Images Using a Modified Deep Convolutional Encoder-Decoder Architecture. Sensors, 21 (16). p. 5630.

Ejaz, Muhammad Mudassir and Tang, Tong Boon and Lu, Cheng-Kai (2021) A fast learning approach for autonomous navigation using a deep reinforcement learning method. Electronics Letters, 57 (2). pp. 50-53.

F

Foong, Choi Yee and Zulkifli, Muhammad Fawwaz Mohd and Wirzal, Mohd Dzul Hakim and Bustam, Mohamad Azmi and Nor, Luqman Hakim Mohamad and Saad, Muhammad Syaamil and Abd Halim, Nur Syakinah (2021) COSMO-RS prediction and experimental investigation of amino acid ionic liquid-based deep eutectic solvents for copper removal. Journal of Molecular Liquids, 333. p. 115884.

Fadzil, Muhamad Amir Mohd and Zabiri, Haslinda and Razali, Adi Aizat and Basar, Jamali and Syamzari Rafeen, Mohammad (2021) Base Oil Process Modelling Using Machine Learning. Energies, 14 (20). p. 6527.

Fatima, Syeda Anmol and Ramli, Nasser and Taqvi, Syed Ali Ammar and Zabiri, Haslinda (2021) Prediction of industrial debutanizer column compositions using data-driven ANFIS-and ANN-based approaches. Neural Computing and Applications, 33. pp. 8375-8387.

Farnam, Marjan and bin Mukhtar, Hilmi and bin Mohd Shariff, Azmi (2021) Highly permeable and selective polymeric blend mixed matrix membranes for CO 2/CH 4 separation. Chemical Papers, 75. pp. 5663-5685.

Farnam, Marjan and bin Mukhtar, Hilmi and bin Mohd Shariff, Azmi (2021) A review on glassy and rubbery polymeric membranes for natural gas purification. ChemBioEng Reviews, 8 (2). pp. 90-109.

Farooqi, Ahmad Salam and Yusuf, Mohammad and Zabidi, Noor Asmawati Mohd and Saidur, R and Sanaullah, Khairuddin and Farooqi, Abid Salam and Khan, Afrasyab and Abdullah, Bawadi (2021) A comprehensive review on improving the production of rich-hydrogen via combined steam and CO2 reforming of methane over Ni-based catalysts. International Journal of Hydrogen Energy, 46 (60). pp. 31024-31040.

Farnam, Marjan and bin Mukhtar, Hilmi and bin Mohd Shariff, Azmi (2021) A review on glassy and rubbery polymeric membranes for natural gas purification. ChemBioEng Reviews, 8 (2). pp. 90-109.

Fong, K.M. and Wang, X. and Kamaruddin, S. and Ismadi, M.-Z. (2021) Investigation on universal tool wear measurement technique using image-based cross-correlation analysis. Measurement: Journal of the International Measurement Confederation, 169.

Farouk Kineber, A. and Othman, I.B. and Oke, A.E. and Chileshe, N. (2021) Modelling the relationship between value managementâ��s activities and critical success factors for sustainable buildings. Journal of Engineering, Design and Technology.

Farnam, M. and bin Mukhtar, H. and bin Mohd Shariff, A. (2021) Highly permeable and selective polymeric blend mixed matrix membranes for CO2/CH4 separation. Chemical Papers.

Farooq, W. and Musarat, M.A. and Alaloul, W.S. and Kazmi, S.A.A. and Altaf, M. and Rabbani, M.B.A. (2021) Comparative Study of Thin-Film Perovskite Solar Cells Based on Methylammonium Lead Iodide and Methylammonium Lead Bromide. International Review of Electrical Engineering, 16 (6). pp. 587-595.

Farooqi, B.A. and Ahmad, M.R.B. and Ali, M. (2021) Analysis of interconnected configuration for penetration of distributed generation. International Journal of Advanced Technology and Engineering Exploration, 8 (74). pp. 1-11.

Farooqi, A.S. and Yusuf, M. and Ishak, M.A.I. and Zabidi, N.A.M. and Saidur, R. and Khan, A. and Abdullah, B. (2021) Combined H2O and CO2 Reforming of CH4 Over Ca Promoted Ni/Al2O3 Catalyst: Enhancement of Ni-CaO Interactions. Lecture Notes in Mechanical Engineering. pp. 220-229.

Farrukh, S. and Fan, X. and Mustafa, K. and Hussain, A. and Ayoub, M. and Younas, M. (2021) Hydrogen sulfide decomposition and nanotechnology. Green Energy and Technology. pp. 37-47.

Farrukh, S. and Fan, X. and Mustafa, K. and Hussain, A. and Ayoub, M. and Younas, M. (2021) Fossil hydrocarbon decarbonization and nanotechnology. Green Energy and Technology. pp. 25-35.

Farrukh, S. and Fan, X. and Mustafa, K. and Hussain, A. and Ayoub, M. and Younas, M. (2021) Hydrogen from miscellaneous sources and nanotechnology. Green Energy and Technology. pp. 61-71.

Farrukh, S. and Fan, X. and Mustafa, K. and Hussain, A. and Ayoub, M. and Younas, M. (2021) Introduction. Green Energy and Technology. pp. 1-11.

Farrukh, S. and Fan, X. and Mustafa, K. and Hussain, A. and Ayoub, M. and Younas, M. (2021) Biomass decomposition and nanotechnology. Green Energy and Technology. pp. 49-59.

Farrukh, S. and Fan, X. and Mustafa, K. and Hussain, A. and Ayoub, M. and Younas, M. (2021) Hydrogen fuel cells and nanotechnology. Green Energy and Technology. pp. 95-103.

Farrukh, S. and Fan, X. and Mustafa, K. and Hussain, A. and Ayoub, M. and Younas, M. (2021) Physisorption. Green Energy and Technology. pp. 73-82.

Farrukh, S. and Fan, X. and Mustafa, K. and Hussain, A. and Ayoub, M. and Younas, M. (2021) Chemisorption. Green Energy and Technology. pp. 83-93.

Farrukh, S. and Fan, X. and Mustafa, K. and Hussain, A. and Ayoub, M. and Younas, M. (2021) Hydrogen future: Toward industrial applications. Green Energy and Technology. pp. 105-109.

Farnam, M. and bin Mukhtar, H. and bin Mohd Shariff, A. (2021) A Review on Glassy and Rubbery Polymeric Membranes for Natural Gas Purification. ChemBioEng Reviews, 8 (2). pp. 90-109.

Fathi, A.Y. and El-Khodary, I.A. and Saafan, M. (2021) A Hybrid Model Integrating Singular Spectrum Analysis and Backpropagation Neural Network for Stock Price Forecasting. Revue d'Intelligence Artificielle, 35 (6). pp. 483-488.

Farooq, W. and Musarat, M.A. and Iqbal, J. and Kazmi, S.A.A. and Khan, A.D. and Alaloul, W.S. and Baarimah, A.O. and Elnaggar, A.Y. and Ghoneim, S.S.M. and Ghaly, R.N.R. (2021) Optimized thin-film organic solar cell with enhanced efficiency. Sustainability (Switzerland), 13 (23).

Feng, Ying Xing and Kiguchi, Masashi and Ung, Wei Chun and Dass, Sarat Chandra and Mohd Hani, Ahmad Fadzil and Tang, Tong Boon and Ho, Eric Tatt Wei (2021) Working Memory Performance under a Negative Affect Is More Susceptible to Higher Cognitive Workloads with Different Neural Haemodynamic Correlates. Brain sciences, 11 (7). p. 935.

G

Ghazali, Nur Adibah and Aqsha, Aqsha and Komiyama, Masaharu and Qasim, Muhammad and Mohd Yusoff, Mohd Hizami and Ayoub, Muhammad and Ameen, Mariam and Tijani, Mansour Mohammedramadan (2021) Comparative Study on Ni/γ-Al2O3 Prepared via Ultrasonic Irradiation and Impregnation Approaches as an Oxygen Carrier in Chemical Looping Combustion. Industrial & Engineering Chemistry Research, 60 (37). pp. 13542-13552.

Goyal, Sonam and Shaharun, Maizatul Shima and Jayabal, Ganaga Suriya and Kait, Chong Fai and Abdullah, Bawadi and Wei, Lim Jun (2021) Photocatalytic Reduction of CO2 to Methanol Using a Copper-Zirconia Imidazolate Framework. Catalysts, 11 (3). p. 346.

Ghazali, Nur Adibah and Aqsha, Aqsha and Komiyama, Masaharu and Qasim, Muhammad and Yusoff, Mohd Hizami Mohd and Ayoub, Muhammad and Ameen, Mariam and Tijani, Mansour Mohammedramadan (2021) Comparative Study on Ni/γ-Alâ��Oâ�� Prepared via Ultrasonic Irradiation and Impregnation Approaches as an Oxygen Carrier in Chemical Looping Combustion.

Ghali, A.A. and Ahmad, R. and Alhussian, H. (2021) A framework for mitigating ddos and dos attacks in iot environment using hybrid approach. Electronics (Switzerland), 10 (11).

Ghazali, R. and Ali, F.H.M. and Bakar, H.A. and Ahmad, M.N. and Haron, N.S. and Omar, A.H. and Ahmadian, A. (2021) Blockchain for record-keeping and data verifying: proof of concept. Multimedia Tools and Applications.

Gad, M.A. and Nikbakht, E. and Khaled, A. and Al-Raeeini, A. (2021) Ultimate Strength of Glass Fibre Reinforced Polymerâ��Engineered Cementitious Composites (GFRP-ECC) Sandwich Composite Sections. Lecture Notes in Civil Engineering, 139 LN. pp. 51-61.

Gardezi, S.S.S. and Shafiq, N. (2021) Prospects of a sustainable eol-carbon footprint assessment of a tropical housing habitat. Lecture Notes in Civil Engineering, 132. pp. 545-554.

Giwa, A. and Yusuf, A. and Balogun, H.A. and Sambudi, N.S. and Bilad, M.R. and Adeyemi, I. and Chakraborty, S. and Curcio, S. (2021) Recent advances in advanced oxidation processes for removal of contaminants from water: A comprehensive review. Process Safety and Environmental Protection, 146. pp. 220-256.

Gu, H. and Guo, Z. and Naik, N. and Shetty, D.K. and Hameed, B.M.Z. and Chakraborty, U.K. and Paul, R. and Vanahalli, M.K. and Srivastava, D.K. and Gupta, A. and Singla, B. and Kumar, S. and Aaydee, N. and Liu, C. and Hao, Q. and Zhang, H. and Patil, S. and John, B. and Karuppanan, S. and Sun, L. and Le, T.Q. and Gurunathan, B. and Muthukumaran, C. and Sham Aan, M.P. and Lu, N. and Zhou, H.N. and Manoharan, A.N. and Maddodi, B. (2021) Frontiers of Advanced Sciences and Technologies: Results, Challenges and Perspectives. Engineered Science, 16. pp. 1-4.

Gardezi, S.S.S. and Shafiq, N. and Hassan, I. and Arshid, M.U. (2021) Life Cycle Carbon Footprint Assessments, Case Study of Malaysian Housing Sector. Environmental and Climate Technologies, 25 (1). pp. 1003-1017.

Gardezi, S.S.S. and Shafiq, N. and Khan, M.W.A. (2021) Relational pre-impact assessment of conventional housing features and carbon footprint for achieving sustainable built environment. Environment, Development and Sustainability.

Gul Zaman, H. and Baloo, L. and Pendyala, R. and Singa, P.K. and Ilyas, S.U. and Kutty, S.R.M. (2021) Produced water treatment with conventional adsorbents and MOF as an alternative: A review. Materials, 14 (24).

Gadipudi, N. and Elamvazuthi, I. and Lu, C.-K. and Paramasivam, S. and Su, S. (2021) WPO-net: Windowed pose optimization network for monocular visual odometry estimation. Sensors, 21 (23).

Ghaleb, A.A.S. and Kutty, S.R.M. and Salih, G.H.A. and Jagaba, A.H. and Noor, A. and Kumar, V. and Almahbashi, N.M.Y. and Saeed, A.A.H. and Saleh Al-dhawi, B.N. (2021) Sugarcane bagasse as a co-substrate with oil-refinery biological sludge for biogas production using batch mesophilic anaerobic co-digestion technology: Effect of carbon/nitrogen ratio. Water (Switzerland), 13 (5).

H

Hassan, Tengku Nur Adibah Tengku and Jusoh, Norwahyu and Yeong, Yin Fong (2021) Synthesis and characterization of PEBAX 1657 and hierarchical Linde Type-T (h-LTT) zeolite for the fabrication of hybrid membranes. Materials Today: Proceedings, 47. pp. 1263-1268.

Hussain, Maham and Zabiri, H and Uddin, Fahim and Yusup, Suzana and Tufa, Lemma Dendena (2021) Pilot-scale biomass gasification system for hydrogen production from palm kernel shell (part B): dynamic and control studies. Biomass Conversion and Biorefinery. pp. 1-23.

Hussain, Maham and Zabiri, H and Uddin, Fahim and Yusup, Suzana and Tufa, Lemma Dendena (2021) Pilot-scale biomass gasification system for hydrogen production from palm kernel shell (part A): steady-state simulation. Biomass Conversion and Biorefinery. pp. 1-14.

Haron, Gamal Abdalla Suliman and Mahmood, Hamayoun and Noh, Mohd Hilmi and Alam, Md Zahangir and Moniruzzaman, Muhammad (2021) Ionic liquids as a sustainable platform for nanocellulose processing from bioresources: Overview and current status. ACS Sustainable Chemistry & Engineering, 9 (3). pp. 1008-1034.

Husain, K. and Zahid, M.S.M. and Hassan, S.U. and Hasbullah, S. and Mandala, S. (2021) Advances of ECG sensors from hardware, software and format interoperability perspectives. Electronics (Switzerland), 10 (2). pp. 1-36.

Haruna, A. and Shafiq, N. and Montasir, O.A. (2021) Building information modelling application for developing sustainable building (Multi criteria decision making approach). Ain Shams Engineering Journal, 12 (1). pp. 293-302.

Hanafiah, Ahmad Syukri and Maulud, Abdulhalim Shah and Shahid, Muhammad Zubair and Suleman, Humbul and Buang, Azizul (2021) Raman calibration models for chemical species determination in CO2-loaded aqueous MEA solutions using PLS and ANN techniques. ChemEngineering, 5 (4). p. 87.

Hampo, C.C. and Mokhtar, A.A. and Muhammed, M. and Rasangika, K.A.H.D. and Shanshan, Y. (2021) Life cycle cost analysis of an electric centrifugal chiller integrated with a district cooling plant. International Journal of Sustainable Energy.

Hussain, P.B. and Shaik, N.B. and Mokhtar, A.A.B. and Bakthavatchalam, B. and Ahmad, F. and Harun, M.S.B. (2021) Failure analysis of a broken SA564 stainless steel pump shaft. International Journal of Materials and Product Technology, 62 (1-3). pp. 152-166.

Hasan, R.A. and Sulaiman, S. and Ashykin, N.N. and Abdullah, M.N. and Hafeez, Y. and Ali, S.S.A. (2021) Workplace mental state monitoring during VR-based training for offshore environment. Sensors, 21 (14).

Hamid, M.A.B. and Beh, H.G. and Oluwatobi, Y.A. and Chew, X.Y. and Ayub, S. (2021) Generation of proton-and alpha-induced nuclear cross-section data via random forest algorithm: Production of radionuclide111in. Applied Sciences (Switzerland), 11 (15).

Hanum, H.M. and Abas, L.H.M. and Aziz, A.S. and Bakar, Z.A. and Diah, N.M. and Ahmad, W.F.W. and Ali, N.M. and Zamin, N. (2021) MELODY TRAINING WITH SEGMENT-BASED TILT CONTOUR FOR QURANIC TARANNUM. Malaysian Journal of Computer Science, 2021 (Specia). pp. 1-14.

Hanamertani, A.S. and Ahmed, S. (2021) Probing the role of associative polymer on scCO2-Foam strength and rheology enhancement in bulk and porous media for improving oil displacement efficiency. Energy, 228.

Hizam, S.M. and Bilad, M.R. and Nordin, N.A.H. and Sambudi, N.S. and Wirzal, M.D.H. and Yusof, N. and Klaysom, C. and Jaafar, J. (2021) Inclined forward osmosis module system for fouling control in sustainable produced water treatment using seawater as draw solution. Journal of Water Process Engineering, 40.

Hashlamon, I. and Nikbakht, E. and Topa, A. and Elhattab, A. (2021) Numerical parametric study on the effectiveness of the contact-point response of a stationary vehicle for bridge health monitoring. Applied Sciences (Switzerland), 11 (15).

Hashmani, M.A. and Jameel, S.M. and Rizvi, S.S.H. and Shukla, S. (2021) An adaptive federated machine learning-based intelligent system for skin disease detection: A step toward an intelligent dermoscopy device. Applied Sciences (Switzerland), 11 (5). pp. 1-19.

Hashim, I. and Draman, N.N.C. and Karim, S.A.A. and Yeo, W.P. and Baleanu, D. (2021) Scattered data interpolation using cubic trigonometric bÃ©zier triangular patch. Computers, Materials and Continua, 69 (1). pp. 221-236.

Hashlamon, I. and Nikbakht, E. and Topa, A. (2021) Indirect bridge health monitoring employing contact-point response of instrumented stationary vehicle. Lecture Notes in Civil Engineering, 132. pp. 883-890.

Hussain, I.A. and Ul-Haq Gilani, S.I. and Al-Kayiem, H.H. and Bin Abdullah, M.Z. and Akhter, J. (2021) Integration of compound parabolic concentrator with solar power tower receiver. Green Energy and Technology. pp. 73-92.

Harim, N.A. and Karim, S.A.A. and Othman, M. and Ghaffar, A. and Nisar, K.S. (2021) Rational Quartic Spline Interpolation and Its Application in Signal Processing. Studies in Systems, Decision and Control, 320. pp. 1-23.

Hassan, F. and Mahmood, A.K.B. and Yahya, N. and Saboor, A. and Abbas, M.Z. and Khan, Z. and Rimsan, M. (2021) State-of-the-Art Review on the Acoustic Emission Source Localization Techniques. IEEE Access, 9. pp. 101246-101266.

Hamad, A.H. and Mahmood, A.A. and Abed, S.A. and Ying, X. (2021) Semantic relatedness maximisation for word sense disambiguation using a hybrid firefly algorithm. Journal of Intelligent and Fuzzy Systems, 41 (6). pp. 7047-7061.

Halil, N. and Rusli, R. and Zainal Abidin, M. and Jamen, S. and Khan, F. (2021) An integrated health risk assessment with control banding for nanomaterials exposure. Process Safety Progress.

Haq, I.U. and Qasim, A. and Lal, B. and Zaini, D.B. (2021) Mini review on environmental issues concerning conventional gas hydrate inhibitors. Process Safety Progress.

Husna, U.Z. and Elraies, K.A. and Shuhili, J.A.B.M. and Elryes, A.A. (2021) A review: the utilization potency of biopolymer as an eco-friendly scale inhibitors. Journal of Petroleum Exploration and Production Technology.

Hossain, S. and Shozib, I.A. and Islam, M.R. (2021) Production and physico-chemical properties analysis of co-pyrolytic oil derived from co-pyrolysis of scrap tires and sawdust. Energy Sources, Part A: Recovery, Utilization and Environmental Effects.

Hafeez, Y. and Ali, S.S.A. and Hasan, R.A. and Adil, S.H. and Moinuddin, M. and Ebrahim, M. and Yusoff, M.S.B. and Amin, H. and Al-Saggaf, U. (2021) Development of Enhanced Stimulus Content to Improve the Treatment Efficacy of EEG-Based Frontal Alpha Asymmetry Neurofeedback for Stress Mitigation. IEEE Access, 9. pp. 130638-130648.

Hossain, M.R. and Ismail, M.T. and Karim, S.A.B.A. (2021) Improving Stock Price Prediction Using Combining Forecasts Methods. IEEE Access, 9. pp. 132319-132328.

Hussain, A. and Ting, D.H. and Hlavacs, H. and Abbasi, A.Z. (2021) In-Game Virtual Consumption and Online Video Game Addiction: A Conceptual Model. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 12789 . pp. 210-218.

Hussain, A. and Abbasi, A. and Hollebeek, L.D. and Schultz, C.D. and Ting, D.H. and Wilson, B. (2021) Videogames-as-a-service: converting freemium- to paying-users through pop-up advertisement value. Journal of Services Marketing.

Hussain, M. and Zabiri, H. and Uddin, F. and Yusup, S. and Tufa, L.D. (2021) Pilot-scale biomass gasification system for hydrogen production from palm kernel shell (part B): dynamic and control studies. Biomass Conversion and Biorefinery.

Ho, C.-D. and Lin, G.-H. and Chew, T.L. and Lin, L.-P. (2021) Conjugated heat transfer of power-law fluids in double-pass concentric circular heat exchangers with sinusoidal wall fluxes. Mathematical Biosciences and Engineering, 18 (5). pp. 5592-5613.

Ho, C.-D. and Chen, L. and Lim, J.-W. and Lin, P.-H. and Lu, P.-T. (2021) Distillate flux enhancement of direct contact membrane distillation modules with inserting cross-diagonal carbon-fiber spacers. Membranes, 11 (12).

Hanafiah, A.S. and Maulud, A.S. and Shahid, M.Z. and Suleman, H. and Buang, A. (2021) Raman calibration models for chemical species determination in CO2-loaded aqueous MEA solutions using PLS and ANN techniques. ChemEngineering, 5 (4).

Hussain, Z. and Zuhra and Rukh, G. and Zada, A. and Naz, M.Y. and Khan, K.M. and Shukrullah, S. and Sulaiman, S.A. (2021) Construction of rechargeable bio-battery cells from electroactive antioxidants extracted from wasted vegetables. Cleaner Engineering and Technology, 5.

Hanif, M. and Jeoti, V. and Ahmad, M.R. and Aslam, M.Z. and Qureshi, S. and Stojanovic, G. (2021) FEM analysis of various multilayer structures for CMOS compatible wearable acousto-optic devices. Sensors, 21 (23).

Hagar, H.S. and Foroozesh, J. (2021) Effect of CO2 and salinity on microbial hydrogen sulphide generation in hydrocarbon reservoirs. Journal of Natural Gas Science and Engineering, 96.

Husain, S.F. and McIntyre, R.S. and Tang, T.-B. and Abd Latif, M.H. and Tran, B.X. and Linh, V.G. and Thao, T.P.N. and Ho, C.S. and Ho, R.C. (2021) Functional near-infrared spectroscopy during the verbal fluency task of English-Speaking adults with mood disorders: A preliminary study. Journal of Clinical Neuroscience, 94. pp. 94-101.

Hussain, M. and Zabiri, H. and Uddin, F. and Yusup, S. and Tufa, L.D. (2021) Pilot-scale biomass gasification system for hydrogen production from palm kernel shell (part A): steady-state simulation. Biomass Conversion and Biorefinery.

Hussein, N.A.A. and Hawari, H.F. and Hoong, W.Y. and Haseeb, A.S.M.A. (2021) Preparation and sensing characterization of hybrid iron oxide/polyaniline/reduced graphene oxide at room temperature. International Journal of Chemical and Biochemical Sciences, 20. pp. 90-95.

Husain, Syeda Fabeha and McIntyre, Roger S and Tang, Tong-Boon and Abd Latif, Muhamad Hafiz and Tran, Bach X and Linh, Vu Gia and Thao, Thi Phuong Nguyen and Ho, Cyrus S and Ho, Roger C (2021) Functional near-infrared spectroscopy during the verbal fluency task of English-Speaking adults with mood disorders: A preliminary study. Journal of Clinical Neuroscience, 94. pp. 94-101.

Husain, Syeda Fabeha and Tang, Tong-Boon and Tam, Wilson W and Tran, Bach X and Ho, Cyrus S and Ho, Roger C (2021) Cortical haemodynamic response during the verbal fluency task in patients with bipolar disorder and borderline personality disorder: a preliminary functional near-infrared spectroscopy study. BMC psychiatry, 21. pp. 1-10.

I

Islam, Md Rafiqul and Uddin, Shihab and Chowdhury, Md Raihan and Wakabayashi, Rie and Moniruzzaman, Muhammad and Goto, Masahiro (2021) Insulin transdermal delivery system for diabetes treatment using a biocompatible ionic liquid-based microemulsion. ACS Applied Materials & Interfaces, 13 (36). pp. 42461-42472.

Iqbal, Farukh and Abdullah, Bawadi and Oladipo, Habeebllah and Yusuf, Mohammad and Alenazey, Feraih and Nguyen, Trinh Duy and Ayoub, Muhammad (2021) Recent developments in photocatalytic irradiation from CO2 to methanol. Nanostructured Photocatalysts. pp. 519-540.

Inayat, Abrar and Khan, Zakir and Aslam, Muhammad and Shahbaz, Muhammad and Ahmad, Murni M and Mutalib, MI Abdul and Yusup, Suzana (2021) Integrated adsorption steam gasification for enhanced hydrogen production from palm waste at bench scale plant. International Journal of Hydrogen Energy, 46 (59). pp. 30581-30591.

Idris, Ahmad Muzammil and Ho, Wai Shin and Rusli, Risza and Ramli, Ahmad Fakrul and Chee, Wan Choy and Hashim, Haslenda and Ab Muis, Zarina and Lim, Jeng Shiun (2021) Optimal Sizing and Costing of Water-Energy Nexus System. Chemical Engineering Transactions, 89. pp. 583-588.

Iqbal, Farukh and Nadeem, Saad and Zakaria, Kamran and Abdullah, Bawadi (2021) ZnFe2O4 Doped TiO2 Photocatalyst Synthesis and Characterization with Effect of Different Coupling Ratios on Band Gap. Journal of the Chemical Society of Pakistan, 43 (6).

Idris, A.M. and Ho, W.S. and Rusli, R. and Ramli, A.F. and Chee, W.C. and Hashim, H. and Muis, Z.A. and Lim, J.S. (2021) Optimal Sizing and Costing of Water-Energy Nexus System. Chemical Engineering Transactions, 89. pp. 583-588.

Inayat, A. and Ghenai, C. and Alyassi, A. and Alawadhi, M. and Alhattawi, N. and Jamil, F. and Ayoub, M. (2021) Heat Integration for the Air-Conditioning Application using Waste Heat Recovery in the Cast Iron Industry. Chemical Engineering Transactions, 88. pp. 1135-1140.

Isah, B.W. and Mohamad, H. and Ahmad, N.R. (2021) Rock stiffness measurements fibre Bragg grating sensor (FBGs) and the effect of cyanoacrylate and epoxy resin as adhesive materials. Ain Shams Engineering Journal, 12 (2). pp. 1677-1691.

Isyaku, U.B. and Khir, M.H.B.M. and Nawi, I.M. and Zakariya, M.A. and Zahoor, F. (2021) ZnO Based Resistive Random Access Memory Device: A Prospective Multifunctional Next-Generation Memory. IEEE Access, 9. pp. 105012-105047.

Isah, B.W. and Mohamad, H. (2021) Surface-mounted bare and packaged fiber bragg grating sensors for measuring rock strain in uniaxial testing. Sensors, 21 (9).

Idris, N.N. and Mustaffa, Z. and Ben Seghier, M.E.A. and Trung, N.-T. (2021) Burst capacity and development of interaction rules for pipelines considering radial interacting corrosion defects. Engineering Failure Analysis, 121.

Ismael, M.A. and A. Aziz, A.R. and Mohammed, S.E. and Zainal A, E.Z. and Baharom, M.B. and Hagos, F.Y. (2021) Macroscopic and microscopic spray structure of water-in-diesel emulsions. Energy, 223.

Isa, N.A. and Bareduan, S.A. and Zainudin, A.S. and Marsudi, M. (2021) Multiple bottlenecks sorting criterion at initial sequence in solving permutation flow shop scheduling problem. Journal of Advanced Manufacturing Technology, 15 (1). pp. 39-54.

Islam, J. and Rahaman, M.S.A. and Vasant, P.M. and Negash, B.M. and Hoqe, A. and Alhitmi, H.K. and Watada, J. (2021) A modified niching crow search approach to well placement optimization. Energies, 14 (4).

Imran, Q.S. and Siddiqui, N.A. and Latiff, A.H.A. and Bashir, Y. and Khan, M. and Qureshi, K. and Al-Masgari, A.A.-S. and Ahmed, N. and Jamil, M. (2021) Automated fault detection and extraction under gas chimneys using hybrid discontinuity attributes. Applied Sciences (Switzerland), 11 (16).

Ismail, F.I. and Farhan, S.A. and Shafiq, N. and Husna, N. and Sharif, M.T. and Affan, S.U. and Veerasenan, A.K. (2021) Nano-porous silica-aerogel-incorporated composite materials for thermal-energy-efficient pitched roof in the tropical region. Applied Sciences (Switzerland), 11 (13).

Irshad, K. and Almalawi, A. and Habib, K. and Zahir, M.H. and Ali, A. and Islam, S. and Saha, B.B. (2021) Experimental Study of a Thermoelectric Air Duct Dehumidification System for Tropical Climate. Heat Transfer Engineering, 42 (13-14). pp. 1159-1171.

Islam, J. and Meraj, S.T. and Masaoud, A. and Mahmud, M.A. and Nazir, A. and Kabir, M.A. and Hossain, M.M. and Mumtaz, F. (2021) Opposition-Based Quantum Bat Algorithm to Eliminate Lower-Order Harmonics of Multilevel Inverters. IEEE Access, 9. pp. 103610-103626.

Ismail, K.A.K. and Othman, I. (2021) Causes of construction accidents and the provisions of safety regulations in construction industry in malaysia. Lecture Notes in Civil Engineering, 132. pp. 602-607.

Irawan, R. and Azizan, N.L. and Liew, M.S. and Al-Yacouby, A.M. and Danyaro, K.U. (2021) Analysis of Spread Moored FPSO-Tanker Side-by-Side System with Offloading Operability. Lecture Notes in Mechanical Engineering. pp. 309-317.

Isiyaka, H.A. and Ramli, A. and Jumbri, K. and Sambudi, N.S. and Zango, Z.U. and Saad, B. (2021) Adsorption and Artificial Neural Network Modelling of Metolachlor Removal by MIL-53(Al) Metal-Organic Framework. Advances in Intelligent Systems and Computing, 1350 A. pp. 245-255.

Idham, Z. and Putra, N.R. and Idrus, N.F.M. and Mili, N. and Ruslan, M.S.H. and Rasidek, N.A.M. and Yunus, M.A.C. (2021) Characteristics and Empirical Modelling of Extract from Hibiscus sabdariffa Using Supercritical CO2 Extraction with Ethanol-Water as Modifier. Lecture Notes in Mechanical Engineering. pp. 375-388.

Irfan, S.A. and Shafie, A. (2021) Artificial Neural Network Modeling of Nanoparticles Assisted Enhanced Oil Recovery. Studies in Systems, Decision and Control, 320. pp. 59-75.

Ismail, M.T. and Shah, N.Z.A. and Karim, S.A.A. (2021) Modeling solar radiation in peninsular Malaysia using arima model. Green Energy and Technology. pp. 53-71.

Iqbal, M. and Karim, S.A.A. and Sarfraz, M. (2021) Construction and Application of Septic B-Spline Tensor Product Scheme. Studies in Systems, Decision and Control, 320. pp. 101-120.

Israr, A. and Abro, G.E.M. and Sadiq Ali Khan, M. and Farhan, M. and Bin Mohd Zulkifli, S.U.A. (2021) Internet of Things (IoT)-Enabled Unmanned Aerial Vehicles for the Inspection of Construction Sites: A Vision and Future Directions. Mathematical Problems in Engineering, 2021.

Ibrahim, A.U. and Negash, B.M. and Rahman, M.T. and Suleiman, A. and Kwaku, D.D. (2021) A mathematical model for estimating effective stimulated reservoir volume. Journal of Petroleum Exploration and Production Technology.

Ibrahim, M.B. and Mustaffa, Z. and Balogun, A.-L. and Hamonangan Harahap, I.S. and Ali Khan, M. (2021) Advanced data mining techniques for landslide susceptibility mapping. Geomatics, Natural Hazards and Risk, 12 (1). pp. 2430-2461.

Ishak, I.C. and Arof, A.M. and Zoolfakar, M.R. and Nizam, A.S. and Jainal, N. (2021) The Challenges of the Oil Spill Preparedness and Responses. Advanced Structured Materials, 147. pp. 59-65.

Ibrahim, O. and Owonikoko, W.O. and Abdulkarim, A. and Otuoze, A.O. and Afolayan, M.A. and Madugu, I.S. and Bakare, M.S. and Adedayo, K.E. (2021) Performance evaluation of different membership function in fuzzy logic based short-term load forecasting. Pertanika Journal of Science and Technology, 29 (2). pp. 959-978.

Inayat, A. and Ahmad, M.A.B. and Raza, M. and Ghenai, C. and Naqvi, S.R. and Ayoub, M. (2021) Development of reaction kinetics model for the production of synthesis gas from dry methane reforming. Bulletin of Chemical Reaction Engineering & Catalysis, 16 (2). pp. 440-445.

Iqbal, F. and Nadeem, S. and Zakaria, K. and Abdullah, B. (2021) ZnFe2O4 Doped TiO2 Photocatalyst Synthesis and Characterization with Effect of Different Coupling Ratios on Band Gap. Journal of the Chemical Society of Pakistan, 43 (6). pp. 736-741.

Irfan, M. and Nawaz, R. and Khan, J.A. and Ullah, H. and Haneef, T. and Legutko, S. and Rahman, S. and JÃ³zwik, J. and Alsaiari, M.A. and Khan, M.K.A. and Mursal, S.N.F. and Alkahtani, F.S. and Alshorman, O. and Ghanim, A.A.J. (2021) Synthesis and characterization of manganese-modified black TiO2 nanoparticles and their performance evaluation for the photodegradation of phenolic compounds from wastewater. Materials, 14 (23).

Imtiaz, L. and Kashif-Ur-rehman, S. and Alaloul, W.S. and Nazir, K. and Javed, M.F. and Aslam, F. and Musarat, M.A. (2021) Life cycle impact assessment of recycled aggregate concrete, geopolymer concrete, and recycled aggregate-based geopolymer concrete. Sustainability (Switzerland), 13 (24).

Isleem, H.F. and Tayeh, B.A. and Alaloul, W.S. and Musarat, M.A. and Raza, A. (2021) Artificial neural network (Ann) and finite element (fem) models for gfrp-reinforced concrete columns under axial compression. Materials, 14 (23).

J

John, Cyril Anak and Tan, Lian See and Tan, Jully and Kiew, Peck Loo and Shariff, Azmi Mohd and Abdul Halim, Hairul Nazirah (2021) Selection of Renewable Energy in Rural Area Via Life Cycle Assessment-Analytical Hierarchy Process (LCA-AHP): A Case Study of Tatau, Sarawak. Sustainability, 13 (21). p. 11880.

Jamal, Norhidayu and Yusuf, Mohammad and Abdullah, Bawadi (2021) SYNGAS PRODUCTION FROM GREENHOUSE GASES VIA DRM OVER Ni/Al2O3 CATALYST: EFFECT OF Ca ADDITION. Platform: A Journal of Engineering, 5 (3). pp. 2-13.

Junejo, A.Z. and Hashmani, M.A. and Memon, M.M. (2021) Empirical evaluation of privacy efficiency in blockchain networks: Review and open challenges. Applied Sciences (Switzerland), 11 (15).

Jamil, A. and Baharom, M.B. and A. Aziz, A.R. (2021) IC engine in-cylinder cold-flow analysis â�� A critical review. Alexandria Engineering Journal, 60 (3). pp. 2921-2945.

Jaffari, R. and Hashmani, M.A. and Reyes-Aldasoro, C.C. (2021) A novel focal phi loss for power line segmentation with auxiliary classifier u-net. Sensors, 21 (8).

Jalal, A. and Hakim, L. and Shafiq, N. (2021) Mechanical and post-cracking characteristics of fiber reinforced concrete containing copper-coated steel and PVA fibers in 100 cement and fly ash concrete. Applied Sciences (Switzerland), 11 (3). pp. 1-14.

Jamaludin, S.N.F. and Noh, K.A.M. (2021) Subsurface Fault Mapping of Central Luconia Province, Offshore Sarawak through Airborne Full Tensor Gradiometry (Air-FTGÂ®) Interpretation. Petroleum and Coal, 63 (3). pp. 929-938.

Jan, A.A. and Lai, F.-W. and Tahir, M. (2021) Developing an Islamic Corporate Governance framework to examine sustainability performance in Islamic Banks and Financial Institutions. Journal of Cleaner Production, 315.

Jagaba, A.H. and Kutty, S.R.M. and Hayder, G. and Baloo, L. and Ghaleb, A.A.S. and Lawal, I.M. and Abubakar, S. and Al-dhawi, B.N.S. and Almahbashi, N.M.Y. and Umaru, I. (2021) Degradation of Cd, Cu, Fe, Mn, Pb and Zn by Moringa-oleifera, zeolite, ferric-chloride, chitosan and alum in an industrial effluent. Ain Shams Engineering Journal, 12 (1). pp. 57-64.

Jamil, M. and Siddiqui, N.A. and Rahman, A.H.B.A. and Ibrahim, N.A. and Ismail, M.S.B. and Ahmed, N. and Usman, M. and Gul, Z. and Imran, Q.S. (2021) Facies heterogeneity and lobe facies multiscale analysis of deep-marine sand-shale complexity in the west crocker formation of sabah basin, nw borneo. Applied Sciences (Switzerland), 11 (12).

Jafry, A.A.A. and Muhammad, A.R. and Kasim, N. and Rosol, A.H.A. and Rusdi, M.F.M. and Ab Alim, N.N.N. and Harun, S.W. and Yupapin, P. (2021) Ultrashort pulse generation with MXene Ti3C2Tx embedded in PVA and deposited onto D-shaped fiber. Optics and Laser Technology, 136.

Jamaludin, S.N.F. and Pubellier, M. and Sautter, B. (2021) Shallow vs. Deep subsurface structures of Central Luconia Province, offshore Malaysia reveal by aeromagnetic, airborne gravity and seismic data. Applied Sciences (Switzerland), 11 (11).

Jaya, I. and Alaloul, W.S. and Musarat, M.A. (2021) Role of inflation in construction: A systematic review. Lecture Notes in Civil Engineering, 132. pp. 701-708.

Joewono, T.B. and Rizki, M. and Dharmowijoyo, D.E. and Prasetyanto, D. (2021) Investigating the ride-hailing users and their perception of the usefulness of its services: A case from bandung, indonesia. Lecture Notes in Civil Engineering, 132. pp. 852-860.

Jagaba, A.H. and Kutty, S.R.M. and Noor, A. and Birniwa, A.H. and Affam, A.C. and Lawal, I.M. and Kankia, M.U. and Kilaco, A.U. (2021) A systematic literature review of biocarriers: Central elements for biofilm formation, organic and nutrients removal in sequencing batch biofilm reactor. Journal of Water Process Engineering, 42.

Jagaba, A.H. and Kutty, S.R.M. and Hayder, G. and Onsa Elsadig, E.H. and Lawal, I.M. and Sayed, K. and Abubakar, S. and Hassan, I. and Umaru, I. and Zubairu, I. and Nasara, M.A. and Soja, U.B. (2021) Evaluation of the physical, chemical, bacteriological and trace metals concentrations in different brands of packaged drinking water. Engineering Letters, 29 (4). pp. 1552-1560.

Jan, A.A. and Lai, F.-W. and Draz, M.U. and Tahir, M. and Ali, S.E.A. and Zahid, M. and Shad, M.K. (2021) Integrating sustainability practices into islamic corporate governance for sustainable firm performance: from the lens of agency and stakeholder theories. Quality and Quantity.

Janjuhah, H.T. and Kontakiotis, G. and Wahid, A. and Khan, D.M. and Zarkogiannis, S.D. and Antonarakou, A. (2021) Integrated porosity classification and quantification scheme for enhanced carbonate reservoir quality: Implications from the miocene malaysian carbonates. Journal of Marine Science and Engineering, 9 (12).

Janga, V.S.R. and Awang, M. and Yamin, M.F. and Suhuddin, U.F.H. and Klusemann, B. and Dos Santos, J.F. (2021) Experimental and numerical analysis of refill friction stir spot welding of thin AA7075-T6 sheets. Materials, 14 (23).

Javed, M.F. and Rafiq, H. and Khan, M.A. and Aslam, F. and Musarat, M.A. and Vatin, N.I. (2021) Axial behavior of concrete-filled double-skin tubular stub columns incorporating PVC pipes. Crystals, 11 (12).

K

Keng, Tan Sew and Samsudin, Mohamad Fakhrul Ridhwan and Sufian, Suriati (2021) Evaluation of wastewater treatment performance to a field-scale constructed wetland system at clogged condition: A case study of ammonia manufacturing plant. Science of The Total Environment, 759. p. 143489.

Khan, Huma Warsi and Reddy, Ambavaram Vijaya Bhaskar and Bustam, Mohamad Azmi and Goto, Masahiro and Moniruzzaman, Muhammad (2021) Development and optimization of ionic liquid-based emulsion liquid membrane process for efficient recovery of lactic acid from aqueous streams. Biochemical Engineering Journal, 176. p. 108216.

Khaidzir, Sakinah and Masri, Asiah Nusaibah and Ruslan, Muhammad Syafiq Hazwan and Abdul Mutalib, Mohamed Ibrahim (2021) Ultrasonic-Assisted Technique as a Novel Method for Removal of Naphthenic Acid from Model Oil Using Piperidinium-Based Ionic Liquids. ACS omega, 6 (14). pp. 9629-9637.

Kamal, Khaliesah and Grekov, Denys I and Shariff, Azmi Mohd and Bustam, Mohamad Azmi and Pré, Pascaline (2021) Improving textural properties of magnesium-based metal-organic framework for gas adsorption by carbon doping. Microporous and Mesoporous Materials, 323. p. 111246.

Khan, Muhammad Saad and Bavoh, Cornelius Borecho and Foo, Khor Siak and Shariff, Azmi Mohd and Kassim, Zamzila and Othman, Nurzatil Aqmar Bt and Lal, Bhajan and Ahmed, Iqbal and Rahman, Mohammad Azizur and Gomari, Sina Rezaei (2021) Kinetic behavior of quaternary ammonium hydroxides in mixed methane and carbon dioxide hydrates. Molecules, 26 (2). p. 275.

Khan, Afrasyab and Sanaullah, Khairuddin and Spiridonov, EK and Podzerko, AV and Khabarova, DF and Ali, Ahmad Hasan and Farooqi, Ahmad Salam and Zwawi, Mohammed and Algarni, Mohammed and Felemban, Bassem F and others (2021) Conductivity Sensors Based System Development and Application to Investigate the Interfacial Behaviour between Supersonic Steam Jet and Water. Instruments and Experimental Techniques, 64. pp. 630-639.

Khan, M.A. and Sadique, M.R. and Harahap, I.H. and Zaid, M. and Alam, M.M. (2021) Static and Dynamic Analysis of the Shielded Tunnel in Alluvium Soil with 2D FEM Model. Transportation Infrastructure Geotechnology.

Khan, D.M. and Yahya, N. and Kamel, N. and Faye, I. (2021) Automated Diagnosis of Major Depressive Disorder Using Brain Effective Connectivity and 3D Convolutional Neural Network. IEEE Access, 9. pp. 8835-8846.

Kumar, R.S. and Al-Arbi Ganat, T. and Sharma, T. (2021) Performance evaluation of silica nanofluid for sand column transport with simultaneous wettability alteration: An approach to environmental issue. Journal of Cleaner Production, 303.

Khlief, A.K. and Ul Haq Gilani, S.I. and Al-Kayiem, H.H. and Mohammad, S.T. (2021) Concentrated solar tower hybrid evacuated tubeâ��photovoltaic/thermal receiver with a non-imaging optic reflector: A case study. Journal of Cleaner Production, 298.

Kabir Ahmad, R. and Anwar Sulaiman, S. and Yusup, S. and Sham Dol, S. and Inayat, M. and Aminu Umar, H. (2021) Exploring the potential of coconut shell biomass for charcoal production. Ain Shams Engineering Journal.

Khan, D.M. and Yahya, N. and Kamel, N. and Faye, I. (2021) Effective Connectivity in Default Mode Network for Alcoholism Diagnosis. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 29. pp. 796-808.

Kumar, V. and Al-Gheethi, A. and Asharuddin, S.M. and Othman, N. (2021) Potential of cassava peels as a sustainable coagulant aid for institutional wastewater treatment: Characterisation, optimisation and techno-economic analysis. Chemical Engineering Journal, 420.

Khurshid, T. and Fatima, S. and Khanday, F.A. and Bashir, F. and Zahoor, F. and Hussin, F.A. (2021) Carbon nanotube field effect transistor (CNTFET) operational transconductance amplifier (OTA) based design of high frequency memristor emulator. International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, 34 (2).

Kumar, A. and Ridha, S. and Narahari, M. and Ilyas, S.U. (2021) Physics-guided deep neural network to characterize non-Newtonian fluid flow for optimal use of energy resources. Expert Systems with Applications, 183.

Kumar, R. and Kannan, R. and Nor, N.B.M. and Mahmud, A. (2021) A high step-up switched z-source converter (Hs-szc) with minimal components count for enhancing voltage gain. Electronics (Switzerland), 10 (8).

Kamal, A.A.A. and Mohamad, S. and Mohamad, M. and Wannahari, R. and Sulaiman, A.Z. and Ajit, A. and Lim, J.-W. and Zaudin, N.A.C. (2021) Extraction of gallic acid from chromolaena sp. Using ultrasound-assisted extraction. Engineering Journal, 25 (2). pp. 269-276.

Kalantari, H. and Ghoreishi-Madiseh, S.A. and Kurnia, J.C. and Sasmito, A.P. (2021) An analytical correlation for conjugate heat transfer in fin and tube heat exchangers. International Journal of Thermal Sciences, 164.

Kineber, A.F. and Othman, I. and Oke, A.E. and Chileshe, N. and Buniya, M.K. (2021) Impact of Value Management on Building Projects Success: Structural Equation Modeling Approach. Journal of Construction Engineering and Management, 147 (4).

Khan, M.I. and Sutanto, M.H. and Napiah, M.B. and Khan, K. and Rafiq, W. (2021) Design optimization and statistical modeling of cementitious grout containing irradiated plastic waste and silica fume using response surface methodology. Construction and Building Materials, 271.

Khan, J.A. and Irawan, S. and Seela Thurai, A. and Cai, B. (2021) Quantitative analysis of blowout preventer flat time for well control operation: Value added data aimed at performance enhancement. Engineering Failure Analysis, 120.

Kurnia, J.C. and Chaedir, B.A. and Sasmito, A.P. and Shamim, T. (2021) Progress on open cathode proton exchange membrane fuel cell: Performance, designs, challenges and future directions. Applied Energy, 283.

Kamal, K. and Grekov, D.I. and Shariff, A.M. and Bustam, M.A. and PrÃ©, P. (2021) Improving textural properties of magnesium-based metal-organic framework for gas adsorption by carbon doping. Microporous and Mesoporous Materials, 323.

Kassa, S. and Gupta, P. and Kumar, M. and Stephan, T. and Kannan, R. (2021) Rotated majority gate-based 2n-bit full adder design in quantum-dot cellular automata nanotechnology. Circuit World.

Kineber, A.F. and Othman, I. and Oke, A.E. and Chileshe, N. and Zayed, T. (2021) Exploring the value management critical success factors for sustainable residential building â�� A structural equation modelling approach. Journal of Cleaner Production, 293.

Khan, M.K.A. and Khan, J.A. and Ullah, H. and Al-Kayiem, H.H. and Irawan, S. and Irfan, M. and Glowacz, A. and Liu, H. and Glowacz, W. and Rahman, S. (2021) De-emulsification and gravity separation of micro-emulsion produced with enhanced oil recovery chemicals flooding. Energies, 14 (8).

Khan, A. and Sanaullah, K. and Zwawi, M. and Farooqi, A.S. and Rigit, A.R.H. and Ullah, A. (2021) Influence of intermittent steam injection into saline water: a study of wave motions in saline water for optimizing similar hydrodynamics in direct contact condensation based milk sterilization process. Waves in Random and Complex Media.

Khan, Z. and Yahya, N. and Alsaih, K. and Al-Hiyali, M.I. and Meriaudeau, F. (2021) Recent Automatic Segmentation Algorithms of MRI Prostate Regions: A Review. IEEE Access, 9. pp. 97878-97905.

kazmi , B. and Taqvi, S.A.A. and Naqvi, M. and Ilyas, S.U. and Moshin, A. and Inamullah, F. and Naqvi, S.R. (2021) Process system analysis on oil processing facility and economic viability from oil well-to-tank. SN Applied Sciences, 3 (7).

Khoo, K.S. and Ooi, C.W. and Chew, K.W. and Foo, S.C. and Lim, J.W. and Tao, Y. and Jiang, N. and Ho, S.-H. and Show, P.L. (2021) Permeabilization of Haematococcus pluvialis and solid-liquid extraction of astaxanthin by CO2-based alkyl carbamate ionic liquids. Chemical Engineering Journal, 411.

Khalili, N.F.M. and Jun, H.J. and Ahmad, A. and Sallih, N. and Lajis, M.A. and Shamsudin, S. (2021) The Investigation of Hot Extrusion Process Parameters on Microstructure and Mechanical Performance of Aluminium Alloy in Biomedical Industry. Lecture Notes in Mechanical Engineering. pp. 327-332.

Kineber, A.F. and Othman, I. and Oke, A.E. and Buniya, M.K. (2021) Value Management Activities in Building Projects in Developing Countries. Lecture Notes in Civil Engineering, 139 LN. pp. 63-70.

Kamal, N.L.M. and Shafiq, N. and Alaloul, W.S. and Beddu, S. and Abd Manan, T.S.B. (2021) Application of response surface methodology for the optimization of mix design concrete using coal bottom ash as cement replacement material. Lecture Notes in Civil Engineering, 132. pp. 396-404.

Khan, N.A. and Ahmed, S. and Razzaq, O.A. and Kamil Mahmood, A. (2021) Exploring fractional order 2-D Helmholtz equation using finite difference scheme through the bat optimization algorithm. Mathematical Methods in the Applied Sciences.

Karim, S.A.A. and Izhar, L.I. and Othman, M. and Zainuddin, N. (2021) Surface Interpolation Using Partially Blended Rational Bi-Quartic Spline. Studies in Systems, Decision and Control, 319. pp. 53-70.

Kannan, R. and Singh, I.S.I. (2021) Power Performance Analysis of Solar Tracking System in UTP. Studies in Systems, Decision and Control, 320. pp. 47-57.

Karim, S.A.A. and Nguyen, V.T. (2021) Positivity-Preserving Interpolation Using Rational Quartic Spline Functions. Studies in Systems, Decision and Control, 319. pp. 87-98.

Karim, S.A.A. and Nguyen, V.T. (2021) On the Space of m-Subharmonic Functions. Studies in Systems, Decision and Control, 319. pp. 133-166.

Khoo, K.S. and Tan, X. and Ooi, C.W. and Chew, K.W. and Leong, W.H. and Chai, Y.H. and Ho, S.-H. and Show, P.L. (2021) How does ionic liquid play a role in sustainability of biomass processing? Journal of Cleaner Production, 284.

Karim, S.A.A. (2021) Preface. Studies in Systems, Decision and Control, 319. v-vii.

Karim, S.A.A. and Saad, N. and Kannan, R. (2021) Preface. Studies in Systems, Decision and Control, 320. v-vi.

Karaeva, A. and Magaril, E. and Al-Kayiem, H. and Torretta, V. and Rada, E.C. (2021) APPROACHES to the ASSESSMENT of ECOLOGICAL and ECONOMIC EFFICIENCY of INVESTMENT PROJECTS: BRIEF REVIEW and RECOMMENDATIONS for IMPROVEMENTS. WIT Transactions on Ecology and the Environment, 253. pp. 515-525.

Kineber, A.F. and Othman, I. and Oke, A.E. and Chileshe, N. and Zayed, T. (2021) Value management implementation barriers for sustainable building: a bibliometric analysis and partial least square structural equation modeling. Construction Innovation.

Kaur, K. and Kalid, K.S. and Sugathan, S.K. (2021) A User Experience Model for Designing Educational Mobile Application. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 13051 . pp. 139-150.

Khan, S.A.R. and Mathew, M. and Dominic, P.D.D. and Umar, M. (2021) Evaluation and selection strategy for green supply chain using interval-valued q-rung orthopair fuzzy combinative distance-based assessment. Environment, Development and Sustainability.

Khan, F.U. and Aziz, I.B. and Akhir, E.A.P. (2021) Pluggable Micronetwork for Layer Configuration Relay in a Dynamic Deep Neural Surface. IEEE Access, 9. pp. 124831-124846.

Khan, M.I. and Wen, L.S. and Sutanto, M.H. and Napiah, M.B. and Zoorob, S.E. (2021) Effect of cement grouts containing irradiated polyethylene terephthalate on properties of semi-flexible mixtures. Key Engineering Materials, 888 KE. pp. 3-8.

Karar, M.E. and Reyad, O. and Abdel-Aty, A.-H. and Owyed, S. and Hassan, M.F. (2021) Intelligent IoT-Aided early sound detection of red palmWeevils. Computers, Materials and Continua, 69 (3). pp. 4095-4111.

Kajo, I. and Kamel, N. and Ruichek, Y. and Al-Ahdal, A. (2021) Frequency-aware SVD decomposition and its application to color magnification and motion denoising. IEEE Access, 9. pp. 108832-108845.

Khan, Z. and Yahya, N. and Alsaih, K. and Al-Hiyali, M.I. and Meriaudeau, F. (2021) Recent Automatic Segmentation Algorithms of MRI Prostate Regions: A Review. IEEE Access, 9. pp. 97878-97905.

Kanapathy, S. and Lee, K.E. and Mokhtar, M. and Syed Zakaria, S.Z. and Sivapalan, S. (2021) A framework for integrating sustainable development concepts into the chemistry curriculum towards achieving education for sustainable development in Malaysia. International Journal of Sustainability in Higher Education, 22 (6). pp. 1421-1449.

Kankia, M.U. and Baloo, L. and Danlami, N. and Mohammed, B.S. and Haruna, S. and Abubakar, M. and Jagaba, A.H. and Sayed, K. and Abdulkadir, I. and Salihi, I.U. (2021) Performance of fly ash-based inorganic polymer mortar with petroleum sludge ash. Polymers, 13 (23).

Khalid, H. and Thaheem, M.J. and Malik, M.S.A. and Musarat, M.A. and Alaloul, W.S. (2021) Reducing cooling load and lifecycle cost for residential buildings: a case of Lahore, Pakistan. International Journal of Life Cycle Assessment, 26 (12). pp. 2355-2374.

Khan, A. and Hussain, Z. and Hussain, K. and Naz, M.Y. and Jan, M.R. and Shukrullah, S. and Ullah, S. and Sulaiman, S.A. and Hussien, M. (2021) Evaluation of the catalytic activity of borax and its calcined derivatives for pyrolytic valorization of waste tire tube rubber for production of oil and gases. Reaction Kinetics, Mechanisms and Catalysis, 134 (2). pp. 883-901.

Khan, H.W. and Reddy, A.V.B. and Bustam, M.A. and Goto, M. and Moniruzzaman, M. (2021) Development and optimization of ionic liquid-based emulsion liquid membrane process for efficient recovery of lactic acid from aqueous streams. Biochemical Engineering Journal, 176.

Khan, T. and Singh, K. and Hasan, M.H. and Ahmad, K. and Reddy, G.T. and Mohan, S. and Ahmadian, A. (2021) ETERS: A comprehensive energy aware trust-based efficient routing scheme for adversarial WSNs. Future Generation Computer Systems, 125. pp. 921-943.

Khan, M.S. and Bavoh, C.B. and Foo, K.S. and Shariff, A.M. and Kassim, Z. and Othman, N.A.B. and Lal, B. and Ahmed, I. and Rahman, M.A. and Gomari, S.R. (2021) Kinetic behavior of quaternary ammonium hydroxides in mixed methane and carbon dioxide hydrates. Molecules, 26 (2).

L

Lee, Xin Ying and Chew, Thiam Leng and Oh, Pei Ching and Jawad, Zeinab Abbas and Ho, Chii-Dong (2021) CO2 adsorption of MSU-2 synthesized by using nonionic polyethyleneoxide (PEO)-based surfactants. Chemical Engineering Communications, 208 (4). pp. 474-482.

Lock, Serene Sow Mun and Lau, Kok Keong and Shariff, Azmi Mohd and Yeong, Yin Fong and Jusoh, Norwahyu (2021) Techno-economic and Environmental Assessment of Ultrathin Polysulfone Membranes for Oxygen-Enriched Combustion. Process Intensification and Integration for Sustainable Design. pp. 69-95.

Lim, Wen Khai and Rusli, Risza and Buang, Azizul and Abdullah, Taram Satiraksa Wan (2021) Development of Emergency Response Team Technical Competency (ER2TC) Assessment Tool for Offshore Process Safety. Journal of Energy and Safety Technology (JEST), 4 (1).

Liaw, K.L. and Kurnia, J.C. and Sasmito, A.P. (2021) Turbulent convective heat transfer in helical tube with twisted tape insert. International Journal of Heat and Mass Transfer, 169.

Latheef, M. and Kim, D.K. (2021) Directional spreading resolution from point measurements for mixed seas and sea states with frequency dependent spreading. Ocean Engineering, 229.

Lin, C.-H. and Liao, W.-M. and Liang, J.-W. and Chen, P.-H. and Ko, C.-E. and Yang, C.-H. and Lu, C.-K. (2021) Denoising Performance Evaluation of Automated Age-Related Macular Degeneration Detection on Optical Coherence Tomography Images. IEEE Sensors Journal, 21 (1). pp. 790-801.

Lim, L.G. and Ung, W.C. and Chan, Y.L. and Lu, C.-K. and Funane, T. and Kiguchi, M. and Tang, T.B. (2021) Optimizing mental workload estimation by detecting baseline state using vector phase analysis approach. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 29. pp. 597-606.

Lo, M. and Karuppanan, S. and Ovinis, M. (2021) Failure pressure prediction of a corroded pipeline with longitudinally interacting corrosion defects subjected to combined loadings using fem and ann. Journal of Marine Science and Engineering, 9 (3).

Looi, K.K. and Baheta, A.T. and Habib, K. (2021) Experimental Performance and Comfort Analyses of Photovoltaic Thermoelectric System in a Room Air-Conditioning Application. Heat Transfer Engineering, 42 (13-14). pp. 1172-1183.

Leong, S.Y. and Kutty, S.R.M. and Bashir, M.J.K. and Li, Q. (2021) A circular economy framework based on organic wastes upcycling for biodiesel production from hermetia illucens. Engineering Journal, 25 (2). pp. 223-234.

Lalji, S.M. and Khan, M.A. and Haneef, J. and Ali, S.I. and Arain, A.H. and Shah, S.S. (2021) Nano-particles adapted drilling fluids for the swelling inhibition for the Northern region clay formation of Pakistan. Applied Nanoscience (Switzerland).

Lau, Z.Y. and Tan, K.S. and Khe, C.S. and Lai, C.W. and You, K.Y. and Tan, W.K. (2021) Synthesis of mrgo nanocomposites as a potential photocatalytic demulsifier for crude oil-in-water emulsion. Journal of Composites Science, 5 (7).

Lee, S.C. and Tee, B.P. and Chong, M.F. and Mohamad, H. and Ang, K.A. and Rahardjo, P.P. (2021) Application of Distributed Fibre Optic Sensor (DFOS) in Bi-directional Static Pile Load Tests. Geotechnical Engineering, 55 (1). pp. 48-54.

Liew, M.S. and Mohammed, B.S. and Danyaro, K.U. and Al-Yacouby, A.M. and Haruna, S. (2021) Effects of quartz powder on the compressive strength of high performance engineered cementitious composites. Lecture Notes in Civil Engineering, 132. pp. 677-684.

Lekkala, M.R. and Latheef, M. and Kim, D.K. and Wahab, M.B.A. (2021) Numerical assessment of flow around circular cylinder. Lecture Notes in Civil Engineering, 132. pp. 289-301.

Lau, J.-S. and Lee, W.-J. and Beh, H.-G. and Sujarwo, W. and Hariharan, K. and Panneerselvam, B. and Ho, Y.-C. (2021) Emerging coagulant in water treatment: A review and a preliminary study. Lecture Notes in Civil Engineering, 132. pp. 187-194.

Lai, L.S. and Jusoh, N. and Tay, W.H. and Yeong, Y.F. and Kiew, P.L. (2021) Rapid Prototyping for the Formulation of Monolith and Membrane for CO2 Removal. Separation and Purification Reviews.

Lim, J.Y. and Loy, A.C.M. and Alhazmi, H. and Fui, B.C.L. and Cheah, K.W. and Taylor, M.J. and Kyriakou, G. and Yoo, C.K. (2021) Machine learningâ��assisted CO2 utilization in the catalytic dry reforming of hydrocarbons: Reaction pathways and multicriteria optimization analyses. International Journal of Energy Research.

Laben, A.B. and Kayiem, H.H.A. and Alameen, M.A. and Khan, J.A. and Belhaj, A.F. and Elraies, K.A. (2021) Experimental study on the performance of emulsions produced during ASP flooding. Journal of Petroleum Exploration and Production Technology.

Leal Filho, W. and Dinis, M.A.P. and Sivapalan, S. and Begum, H. and Ng, T.F. and Al-Amin, A.Q. and Alam, G.M. and Sharifi, A. and Salvia, A.L. and Kalsoom, Q. and Saroar, M. and Neiva, S. (2021) Sustainability practices at higher education institutions in Asia. International Journal of Sustainability in Higher Education.

Lanka, S.T. and Moses, N.G.A. and Suppiah, R.R. and Maulianda, B.T. (2021) Physio-chemical interaction of Ethylene-Vinyl Acetate copolymer on bonding ability in the cementing material used for oil and gas well. Petroleum Research.

Lu, I.-L. and Ong, Y.-S. and KuShaari, K.Z. and Wong, V.-L. and Ramasamy, M.G. (2021) Numerical CFD investigation of liquid-liquid two-phase flow separation in a microseparator. Separation Science and Technology (Philadelphia).

Lotpy, M.A.M.N. and Ismail, A. and Rahman, F.A. and Puteri Zarina, M.K. and Baharudin, B.A. and Awang, M. and Hamid, D.A. (2021) Optimization of Welding Parameters for Self-Support Friction Stir Welding (SS-FSW) on AA6063 Pipe Joints. Advanced Structured Materials, 147. pp. 299-306.

Lawal, I.M. and Bertram, D. and White, C.J. and Jagaba, A.H. and Hassan, I. and Shuaibu, A. (2021) Multi-criteria performance evaluation of gridded precipitation and temperature products in data-sparse regions. Atmosphere, 12 (12).

Latif, M.H.A. and Faye, I. (2021) Automated tibiofemoral joint segmentation based on deeply supervised 2D-3D ensemble U-Net: Data from the Osteoarthritis Initiative. Artificial Intelligence in Medicine, 122.

Loy, A.C.M. and Alhazmi, H. and Lock, S.S.M. and Yiin, C.L. and Cheah, K.W. and Chin, B.L.F. and How, B.S. and Yusup, S. (2021) Life-cycle assessment of hydrogen production via catalytic gasification of wheat straw in the presence of straw derived biochar catalyst. Bioresource Technology, 341.

Loganathan, K. and Lv, J. and Cropley, V. and Zalesky, A. and Ho, E.T.W. (2021) Valuation system connectivity is correlated with poly-drug use in young adults. Neuroscience Research, 173. pp. 114-120.

Leong, H.Y. and Chang, C.-K. and Khoo, K.S. and Chew, K.W. and Chia, S.R. and Lim, J.W. and Chang, J.-S. and Show, P.L. (2021) Waste biorefinery towards a sustainable circular bioeconomy: a solution to global issues. Biotechnology for Biofuels, 14 (1).

Lal, B. and Qasim, A. and Mohammad Shariff, A. (2021) Application of Ionic Liquids in Gas Hydrate Inhibition (GHI). SpringerBriefs in Petroleum Geoscience and Engineering. pp. 17-31.

Lal, B. and Qasim, A. and Mohammad Shariff, A. (2021) Application of Ionic Liquids in Corrosion Inhibition (CI). SpringerBriefs in Petroleum Geoscience and Engineering. pp. 33-48.

Lal, B. and Qasim, A. and Shariff, A.M. (2021) Preface. SpringerBriefs in Petroleum Geoscience and Engineering. V-VI.

Lal, Bhajan and Qasim, Ali and Mohammad Shariff, Azmi and Lal, Bhajan and Qasim, Ali and Mohammad Shariff, Azmi (2021) Application of Ionic Liquids in Gas Hydrate Inhibition (GHI). Ionic Liquids in Flow Assurance. pp. 17-31.

Lal, Bhajan and Qasim, Ali and Mohammad Shariff, Azmi and Lal, Bhajan and Qasim, Ali and Mohammad Shariff, Azmi (2021) Ionic Liquids Usage in Oil and Gas Industry. Ionic Liquids in Flow Assurance. pp. 1-16.

Lal, Bhajan and Qasim, Ali and Mohammad Shariff, Azmi and Lal, Bhajan and Qasim, Ali and Mohammad Shariff, Azmi (2021) Application of Ionic Liquids in Wax, Scale and Asphaltene Deposition Control. Ionic Liquids in Flow Assurance. pp. 49-63.

Lal, Bhajan and Qasim, Ali and Mohammad Shariff, Azmi and Lal, Bhajan and Qasim, Ali and Mohammad Shariff, Azmi (2021) Application of Ionic Liquids in Corrosion Inhibition (CI). Ionic Liquids in Flow Assurance. pp. 33-48.

Liew, Win Sheng and Tang, Tong Boon and Lin, Cheng-Hung and Lu, Cheng-Kai (2021) Automatic colonic polyp detection using integration of modified deep residual convolutional neural network and ensemble learning approaches. Computer Methods and Programs in Biomedicine, 206. p. 106114.

Lim, Lam Ghai and Ung, Wei Chun and Chan, Yee Ling and Lu, Cheng-Kai and Funane, Tsukasa and Kiguchi, Masashi and Tang, Tong Boon (2021) Optimizing mental workload estimation by detecting baseline state using vector phase analysis approach. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 29. pp. 597-606.

Li, Alex Teh Boon and Soleimani, Hassan and Yusuf, Jemilat Yetunde and Chuan, Lee Kean (2021) EFFECT OF CALCINATION TEMPERATURE ON ELECTROMAGNETIC PROPERTIES OF SANDSTONE SATURATED WITH BFO FOR ENHANCED OIL RECOVERY (EOR) APPLICATION. Platform: A Journal of Science and Technology, 4 (2). pp. 3-16.

Lau, Zhen Yin and Tan, Ko Shyn and Khe, Cheng Seong and Lai, Chin Wei and You, Kok Yeow and Tan, Wai Kian (2021) Synthesis of mrgo nanocomposites as a potential photocatalytic demulsifier for crude oil-in-water emulsion. Journal of Composites Science, 5 (7). p. 174.

M

Moshikur, Rahman Md and Ali, Md Korban and Wakabayashi, Rie and Moniruzzaman, Muhammad and Goto, Masahiro (2021) Methotrexate-based ionic liquid as a potent anticancer drug for oral delivery: In vivo pharmacokinetics, biodistribution, and antitumor efficacy. International Journal of Pharmaceutics, 608. p. 121129.

Mubashir, Muhammad and Fong, Yeong Yin and Leng, Chew Thiam and Keong, Lau Kok and Jusoh, Norwahyu (2021) Nanocomposite catalytic membranes for energy production: Advances and challenges. Handbook of Nanotechnology Applications. pp. 239-254.

Majeed, Zahid and Ajab, Zainab and Guan, Qingjie and Abbasi, Abdul Zahir and Mahmood, Qaisar and Mahnashi, Mater H and Alyami, Bandar AA and Alqarni, Ali O and Alqahtani, Yahya S and Mansor, Nurlidia (2021) Reduction in lignin peroxidase activity revealed by effects of lignin content in urea crosslinked starch under aerobic biodegradation in soil. BioResources, 16 (1). p. 1940.

Mahmood, Hamayoun and Shakeel, Ahmad and Abdullah, Ammar and Khan, Muhammad Ilyas and Moniruzzaman, Muhammad (2021) A comparative study on suitability of model-free and model-fitting kinetic methods to non-isothermal degradation of lignocellulosic materials. Polymers, 13 (15). p. 2504.

Moshikur, Rahman Md and Ali, Md Korban and Wakabayashi, Rie and Moniruzzaman, Muhammad and Goto, Masahiro (2021) Favipiravir-based ionic liquids as potent antiviral drugs for oral delivery: Synthesis, solubility, and pharmacokinetic evaluation. Molecular pharmaceutics, 18 (8). pp. 3108-3115.

Mohd Nurddin, Siti Mazatul Azwa Saiyed and Sufian, Suriati and Man, Zakaria and Rabat, Nurul Ekmi and Ahmad, Nazwin (2021) Effectiveness of Sequential Pre-treatment and Application of High-porosity Hybrid Fly Ash Geopolymer/alginate Adsorbent for the Treatment of Batik Wastewater. Journal of Chemical Health Risks, 11 (4). pp. 345-356.

Mohammed, Sulafa Abdalmageed Saadaldeen and Yahya, Wan Zaireen Nisa and Bustam, Mohamad Azmi and Kibria, Md Golam (2021) Elucidation of the roles of ionic liquid in CO2 electrochemical reduction to value-added chemicals and fuels. Molecules, 26 (22). p. 6962.

Mushtaq, Asim and Mukhtar, Hilmi Bin and Shariff, Azmi Mohd (2021) Effect of Mechanical Properties in Enhanced Polymeric Blend Membranes: Properties in Enhanced Polymeric Blend Membranes. Pakistan Journal of Scientific & Industrial Research Series A: Physical Sciences, 64 (2). pp. 97-102.

Moy, Chun-Hung and Tan, Lian-See and Shoparwe, Noor Fazliani and Shariff, Azmi Mohd and Tan, Jully (2021) Comparative study of a life cycle assessment for bio-plastic straws and paper straws: Malaysiaâ��s perspective. Processes, 9 (6). p. 1007.

Maqsood, Khuram and Ali, Abulhassan and Nasir, Rizwan and Abdulrahman, Aymn and Mahfouz, Abdullah Bin and Ahmed, Anas and Shariff, Azmi BM and Ganguly, Saibal and Mubashir, Muhammad and Show, Pau Loke (2021) Experimental and simulation study on high-pressure VLS cryogenic hybrid network for CO2 capture from highly sour natural gas. Process Safety and Environmental Protection, 150. pp. 36-50.

Mertiya, Abhimanyu Singh and Upadhyay, Aman and Nirwan, Kaustubh and Harane, Pravin Pandit and Abdul-Rani, Ahmad Majdi and Pruncu, Catalin Iulian and Unune, Deepak Rajendra (2021) Development and investigation of an inexpensive low frequency vibration platform for enhancing the performance of electrical discharge machining process. Materials, 14 (20). p. 6192.

Mahmood, Hamayoun and Mehmood, Saqib and Shakeel, Ahmad and Iqbal, Tanveer and Kazmi, Mohsin Ali and Khurram, Abdul Rehman and Moniruzzaman, Muhammad (2021) Glycerol assisted pretreatment of lignocellulose wheat straw materials as a promising approach for fabrication of sustainable fibrous filler for biocomposites. Polymers, 13 (3). p. 388.

Moshikur, Rahman Md and Ali, Md Korban and Moniruzzaman, Muhammad and Goto, Masahiro (2021) Recent advances in surface-active ionic liquid-assisted self-assembly systems for drug delivery. Current Opinion in Colloid & Interface Science, 56. p. 101515.

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2021) Impact of inflation rate on construction projects budget: A review. Ain Shams Engineering Journal, 12 (1). pp. 407-414.

Mumtaz, F. and Zaihar Yahaya, N. and Tanzim Meraj, S. and Singh, B. and Kannan, R. and Ibrahim, O. (2021) Review on non-isolated DC-DC converters and their control techniques for renewable energy applications. Ain Shams Engineering Journal.

Mushtaq, Asim and Mukhtar, Hilmi and SHARİFF, Azmi (2021) Characterization of Synthesized Polymeric Blend Membranes Enhanced by Methyl diethanolamine for efficient CO2 Separation. Journal of Thermal Engineering, 7 (2). pp. 71-82.

Mustafa Abro, G.E. and Ali, Z.A. and Zulkifli, S.A. and Asirvadam, V.S. (2021) Performance Evaluation of Different Control Methods for an Underactuated Quadrotor Unmanned Aerial Vehicle (QUAV) with Position Estimator and Disturbance Observer. Mathematical Problems in Engineering, 2021.

Manzoor, B. and Othman, I. and Manzoor, M. (2021) Evaluating the critical safety factors causing accidents in high-rise building projects. Ain Shams Engineering Journal.

Manzoor, B. and Othman, I. and Gardezi, S.S.S. and Harirchian, E. (2021) Strategies for adopting building information modeling (Bim) in sustainable building projectsâ��A case of Malaysia. Buildings, 11 (6).

Mushtaq, A. and Mukhtar, H.B. and Shariff, A.M. (2021) Characterization of Synthesized Polymeric Blend Membranes Enhanced By Methyl Diethanolamine For Efficient co2Separation. Journal of Thermal Engineering, 7 (2). pp. 71-82.

Md Yusof, M.A. and Mohamed, M.A. and Md Akhir, N.A. and Ibrahim, M.A. and Mardhatillah, M.K. (2021) Combined Impact of Salt Precipitation and Fines Migration on CO2 Injectivity Impairment. International Journal of Greenhouse Gas Control, 110.

Mohamad, M. and Wannahari, R. and Mohammad, R. and Shoparwe, N.F. and Nawi, A.S.M. and Lun, K.W. and Wei, L.J. (2021) Adsorption of malachite green dye using spent coffee ground biochar: Optimisation using response surface methodology. Jurnal Teknologi, 83 (1). pp. 27-36.

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2021) Inflation rate and laboursâ�� wages in construction projects: economic relation investigation. Engineering, Construction and Architectural Management.

Malik, A.A. and Nasif, M.S. and Mokhtar, A.A. and Mohd Tohir, M.Z. (2021) Numerical investigation of the effect of weather conditions on the escalation and propagation of fire-induced domino effect. Process Safety Progress.

Meyghani, B. and Awang, M. and Emamian, S.S. (2021) Introducing an enhanced friction model for developing inertia welding simulation: A computational solid mechanics approach. International Journal of Engineering Transactions C: Aspects, 34 (3). pp. 737-743.

Meraj, S.T. and Yahaya, N.Z. and Hasan, K. and Masaoud, A. (2021) A hybrid T-type (HT-type) multilevel inverter with reduced components. Ain Shams Engineering Journal, 12 (2). pp. 1959-1971.

Mohmmed, A.O. and Al-Kayiem, H.H. and Osman, A.B. (2021) Investigations on the slug two-phase flow in horizontal pipes: Past, presents, and future directives. Chemical Engineering Science, 238.

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2021) Construction machinery hire rates deviation in Malaysia: an inflation rate effect analysis. Revista de la Construccion, 20 (1). pp. 91-105.

Mohammed, B.S. and Xian, L.W. and Haruna, S. and Liew, M.S. and Abdulkadir, I. and Zawawi, N.A.W.A. (2021) Deformation Properties of Rubberized Engineered Cementitious Composites Using Response Surface Methodology. Iranian Journal of Science and Technology - Transactions of Civil Engineering, 45 (2). pp. 729-740.

Memon, A.M. and Sutanto, M.H. and Napiah, M. and Yusoff, N.I.M. and Memon, R.A. and Al-Sabaeei, A.M. and Ali, M. (2021) Physicochemical, rheological and morphological properties of bitumen incorporating petroleum sludge. Construction and Building Materials, 297.

Ma, Z. and Yang, Y. and Zhai, G. and Bao, J. and Teh, H.-M. (2021) A study of the impact of plunging waves on the inverted L-shaped breakwater structure based on SPH method. Ships and Offshore Structures.

Mahmood, S.N. and Ishak, A.J. and Saeidi, T. and Soh, A.C. and Jalal, A. and Imran, M.A. and Abbasi, Q.H. (2021) Full ground ultra-wideband wearable textile antenna for breast cancer and wireless body area network applications. Micromachines, 12 (3).

Mustaffa, Z. and Halim, A.H.A. and Kim, D.K. and van Gelder, P.H.A.J.M. (2021) Reliability assessment of the vertical well system subjected to erosion and tubing failure. Ships and Offshore Structures, 16 (2). pp. 127-134.

Manzoor, B. and Othman, I. and Gardezi, S.S.S. and Altan, H. and Abdalla, S.B. (2021) Bim-based research framework for sustainable building projects: A strategy for mitigating bim implementation barriers. Applied Sciences (Switzerland), 11 (12).

Masroor, K. and Jeoti, V. and Drieberg, M. and Cheab, S. and Rajbhandari, S. (2021) A heuristic approach for optical transceiver placement to optimize snr and illuminance uniformities of an optical body area network. Sensors, 21 (9).

Ma, G. and Kamaruddin, M.H. and Kang, H.-S. and Goh, P.-S. and Kim, M.-H. and Lee, K.-Q. and Ng, C.-Y. (2021) Watertight integrity of underwater robotic vehicles by self-healing mechanism. Ain Shams Engineering Journal, 12 (2). pp. 1995-2007.

Maqsood, K. and Ali, A. and Nasir, R. and Abdulrahman, A. and Mahfouz, A.B. and Ahmed, A. and Shariff, A.B.M. and Ganguly, S. and Mubashir, M. and Show, P.L. (2021) Experimental and simulation study on high-pressure V-L-S cryogenic hybrid network for CO2 capture from highly sour natural gas. Process Safety and Environmental Protection, 150. pp. 36-50.

Meraj, S.T. and Hasan, M.K. and Islam, J. and El-Ebiary, Y.A.B. and Nebhen, J. and Hossain, M.M. and Alam, M.K. and Vo, N. (2021) A Diamond Shaped Multilevel Inverter with Dual Mode of Operation. IEEE Access, 9. pp. 59873-59887.

Mukhtar, A. and Ullah, S. and Inayat, A. and Saqib, S. and Mellon, N.B. and Assiri, M.A. and Al-Sehemi, A.G. and Khan Niazi, M.B. and Jahan, Z. and Bustam, M.A. and Ibrahim, M. (2021) Synthesis-structure-property relationship of nitrogen-doped porous covalent triazine frameworks for pre-combustion CO2 capture. Energy, 216.

Mazinani, I. and Sarafraz, M.M. and Ismail, Z. and Hashim, A.M. and Safaei, M.R. and Wongwises, S. (2021) Fluid-structure interaction computational analysis and experiments of tsunami bore forces on coastal bridges. International Journal of Numerical Methods for Heat and Fluid Flow, 31 (5). pp. 1373-1395.

Maghsoudi Nia, E. and Wan Abdullah Zawawi, N.A. and Mahinder Singh, B.S. (2021) A Review of Hybrid Piezoelectric-Photovoltaic System for Lighting a Pedestrian Walkway. Lecture Notes in Civil Engineering, 139 LN. pp. 335-366.

Mizwar, I.K. and Napiah, M. and Sutanto, M.H. (2021) Effect of phase change material on rheological properties of asphalt mastic. Lecture Notes in Civil Engineering, 132. pp. 836-843.

Mohammed, B.S. and Al-Fakih, A. and Liew, M.S. (2021) Characteristics of interlocking concrete bricks incorporated crumb rubber and fly ash. Lecture Notes in Civil Engineering, 132. pp. 631-639.

Masood, F. and Nallagownden, P. and Elamvazuthi, I. and Alam, M.A. and Ali, M. and Azeem, M. (2021) Design and Optical Performance Analysis of a Quasi-stationary Compound Parabolic Concentrator for Photovoltaic Applications. Lecture Notes in Mechanical Engineering. pp. 241-248.

Maghsoudi Nia, E. and Wan Abdullah Zawawi, N.A. and Mahinder Singh, B.S. (2021) Design of a Walkway Using Renewable Energy Harvesters Within Pavement. Lecture Notes in Mechanical Engineering. pp. 281-288.

Manzoor, B. and Othman, I. (2021) Safety Management Model During Construction Focusing on Building Information Modeling (BIM). Lecture Notes in Civil Engineering, 139 LN. pp. 31-37.

Mahadi, N.H. and Mohamad, H. (2021) Interpretation method of distributed fibre optic strain sensor in instrumented static pile load test. Lecture Notes in Civil Engineering, 132. pp. 772-778.

Mohd Mokhtar, M.R. and Wahab, S.N.A. and Myint, K.C. (2021) Assessing landslide exposure from soil characteristics using unmanned aerial vehicle (Uav). Lecture Notes in Civil Engineering, 132. pp. 1123-1129.

Medhi, N.S. and Haryoko, L.A.F. and Kurnia, J.C. (2021) Numerical Investigation of Electronic Cooling with Phase Change Material. Lecture Notes in Mechanical Engineering, 46. pp. 451-461.

Musbah, M.F. and Hustim, M. and Madhoun, W.A. (2021) Assessing the seasonal variation of particulate matters concentration in perak, malaysia. Lecture Notes in Civil Engineering, 132. pp. 983-991.

Mazlina, M. and Liew, M.S. and Adnan, A. and Harahap, I.S.H. and Hamid, N.H. (2021) Ground response analysis for stiff and soft soil under different earthquake events: A comparison. Lecture Notes in Civil Engineering, 132. pp. 891-898.

Memon, A.M. and Sutanto, M.H. and Napiah, M. and Wong, F. and Bujang, M. (2021) Effects of bitumen modification on pavement performance subjected to high vehicular speed and extreme temperature conditions: A review. Lecture Notes in Civil Engineering, 132. pp. 1044-1051.

Meyghani, B. and Awang, M.B. and Teimouri, R. (2021) Prediction of the Temperature Behaviour During Friction Stir Welding (FSW) Using HyperworksÂ®. Lecture Notes in Mechanical Engineering. pp. 119-130.

Maldar, N. and Ng, C.Y. and Fitriadhy, A. and Kang, H.S. (2021) Numerical investigation of an efficient blade design for a flow driven horizontal axis marine current turbine. Lecture Notes in Civil Engineering, 132. pp. 241-248.

Muhammad, M.M. and Yusof, K.W. and Ul Mustafa, M.R. and Ab. Ghani, A. and Abdurrasheed, A.S. and Sholagberu, A.T. and Argungu, A.S. and Abubakar, U.A. (2021) Hydrodynamics of flow over axonopus compressus (Cow grass) as a flexible vegetation. Lecture Notes in Civil Engineering, 132. pp. 103-110.

Mohan, D.G. and Kalid, K.S. (2021) The Development of a Criteria-Based Group Formation Systems for Student Group Work. Lecture Notes on Data Engineering and Communications Technologies, 72. pp. 903-910.

Mathur, N. and Asirvadam, V.S. and Dass, S.C. and Gill, B.S. (2021) Dynamic Mapping and Visualizing Dengue Incidences in Malaysia Using Machine Learning Techniques. EAI/Springer Innovations in Communication and Computing. pp. 195-226.

Madhavi, V. and Vijaya Bhaskar Reddy, A. and Madhavi, G. (2021) Synthesis, characterization, and properties of carbon nanocomposites and their application in wastewater treatment. Green Energy and Technology. pp. 61-83.

Mukhtar, A. and Saqib, S. and Ullah, S. and Sagir, M. and Tahir, M.B. and Mahmood, A. and Al-Sehemi, A.G. and Assiri, M.A. and Ibrahim, M. and Mehdi, S.E.H. (2021) Application of Membrane in Reaction Engineering for Green Synthesis. Advances in Science, Technology and Innovation. pp. 163-171.

Manzoor, B. and Othman, I. and Durdyev, S. and Ismail, S. and Wahab, M.H. (2021) Influence of artificial intelligence in civil engineering toward sustainable developmentâ��a systematic literature review. Applied System Innovation, 4 (3).

Mohammed, B.S. and Shafiq, N. and Kutty, S.R.M. and Mohamad, H. and Balogun, A.-L. (2021) Preface. Lecture Notes in Civil Engineering, 132. v.

Moshikur, R.M. and Ali, M.K. and Wakabayashi, R. and Moniruzzaman, M. and Goto, M. (2021) Favipiravir-Based Ionic Liquids as Potent Antiviral Drugs for Oral Delivery: Synthesis, Solubility, and Pharmacokinetic Evaluation. Molecular Pharmaceutics, 18 (8). pp. 3108-3115.

Milad, A.A. and Adwan, I. and Majeed, S.A. and Memon, Z.A. and Bilema, M. and Omar, H.A. and Abdolrasol, M.G.M. and Usman, A. and Yusoff, N.I.M. (2021) Development of a Hybrid Machine Learning Model for Asphalt Pavement Temperature Prediction. IEEE Access, 9. pp. 158041-158056.

Malik, K. and Ahmad, F. and Gunister, E. and Nakato, T. and Mouri, E. and Muhammad, M.B. and Ali, S. (2021) A Review of Flax Fiber Reinforced Thermoset Polymer Composites: Structure and Mechanical Performance. Journal of Natural Fibers.

Merican, A.M. and Mohamed Amin, A.U.-R. (2021) The 1786 acquisition of Pulau Pinang: Unveiling the light letters, revisiting legal history case materials and R. Bonneyâ��s Kedah 1771â��1821. Kemanusiaan, 28 (2). pp. 189-212.

Muneer, A. and Fati, S.M. and Arifin Akbar, N. and Agustriawan, D. and Tri Wahyudi, S. (2021) iVaccine-Deep: Prediction of COVID-19 mRNA vaccine degradation using deep learning. Journal of King Saud University - Computer and Information Sciences.

Malik, K. and Ahmad, F. and Yunus, N.A. and Gunister, E. and Nakato, T. and Mouri, E. and Ali, S. (2021) A Review of Flax Fiber Reinforced Thermoset Polymer Composites: Thermal-Physical Properties, Improvements and Application. Journal of Natural Fibers.

Mukhtar, A. and Saqib, S. and Ullah, S. and Sagir, M. and Tahir, M.B. and Mahmood, A. and Al-Sehemi, A.G. and Assiri, M.A. and Ibrahim, M. and Zulfiqar, A. (2021) Applications of Polymeric Materials in Biomedical Engineering. Advances in Science, Technology and Innovation. pp. 133-142.

Mukhtar, A. and Saqib, S. and Ullah, S. and Sagir, M. and Tahir, M.B. and Mahmood, A. and Al-Sehemi, A.G. and Assiri, M.A. and Ibrahim, M. and Ali, A. (2021) Nuclear Desalination. Advances in Science, Technology and Innovation. pp. 121-135.

Md Yusof, M.A. and Mohamed, M.A. and Md Akhir, N.A. and Ibrahim, M.A. and Saaid, I.M. and Idris, A.K. and Idress, M. and Awangku Matali, A.A.A. (2021) Influence of Brineâ��Rock Parameters on Rock Physical Changes During CO2 Sequestration in Saline Aquifer. Arabian Journal for Science and Engineering.

Mandi, B. and Menni, Y. and Maouedj, R. and Lorenzini, G. and Ahmadi, M.H. and Emani, S. (2021) Improvement and Nocturnal Extension of the Efficiency of a Solar Still. International Journal of Photoenergy, 2021.

Moy, C.-H. and Tan, L.-S. and Shoparwe, N.F. and Shariff, A.M. and Tan, J. (2021) Comparative study of a life cycle assessment for bio-plastic straws and paper straws: Malaysiaâ��s perspective. Processes, 9 (6).

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2021) Construction machinery hire rates deviation in Malaysia: an inflation rate effect analysis. Revista de la Construccion, 20 (1). pp. 91-105.

Munodawafa, R.T. and Johl, S.K. (2021) Measurement development for eco-innovation capabilities of Malaysian oil and gas firms. International Journal of Productivity and Performance Management.

Mostapha, M. and Azamkamal, F. and Salleh, K.M. and Amran, U.A. and Gan, S. and Zakaria, S. (2021) Parameter Optimization on Esterified Oil Palm Empty Fruit Bunch Cellulose (OPEFB) Pengoptimuman Parameter bagi Selulosa Tandan Kosong Kelapa Sawit (TKKS) Teresterifikasi. Sains Malaysiana, 50 (12). pp. 3719-3732.

May, Z. and Alam, M.K. and Nayan, N.A. and Rahman, N.A.A. and Mahmud, M.S. (2021) Acoustic emission corrosion feature extraction and severity prediction using hybrid wavelet packet transform and linear support vector classifier. PLoS ONE, 16 (12 Dec).

Meraj, S.T. and Yahaya, N.Z. and Lipu, M.S.H. and Islam, J. and Haw, L.K. and Hasan, K. and Miah, M.S. and Ansari, S. and Hussain, A. (2021) A hybrid active neutral point clamped inverter utilizing Si and Ga2O3 semiconductors: Modelling and performance analysis. Micromachines, 12 (12).

Masood, F. and Nor, N.B.M. and Nallagownden, P. and Elamvazuthi, I. and Alam, M.A. and Yusuf, M. and Ali, M. and Akhter, J. and Mehmood, M. (2021) Dataset on the effect of receiver size and acceptance half-angle on the aperture width and height of compound parabolic concentrator for low-concentrating photovoltaic applications using RSM. Data in Brief, 39.

Mohd Johari, S.A. and Mahad Nasir, M.M. and Ali, S. and Hamza, A. and Aleem, W. and Ameen, M. and Aqsha, A. (2021) Recent Technology Developments in Biogas Production from Waste Materials in Malaysia. ChemBioEng Reviews, 8 (6). pp. 564-592.

Moshikur, R.M. and Ali, M.K. and Moniruzzaman, M. and Goto, M. (2021) Recent advances in surface-active ionic liquid-assisted self-assembly systems for drug delivery. Current Opinion in Colloid and Interface Science, 56.

Mizwar, I.K. and Napiah, M. and Sutanto, M.H. and Habib, N.Z. and Thanapal, P. and Qin, Y. (2021) Rutting Prevention of Bituminous Mastic Using Microencapsulation Phase Change Material. Journal of Materials in Civil Engineering, 33 (12).

Mahpudz, A. and Lim, S.L. and Inokawa, H. and Kusakabe, K. and Tomoshige, R. (2021) Cobalt nanoparticle supported on layered double hydroxide: Effect of nanoparticle size on catalytic hydrogen production by NaBH4 hydrolysis. Environmental Pollution, 290.

Moujdin, I.A. and Khan, M.S. and Lal, B. and Abulkhair, H.A. and Alsaiari, A. (2021) Dual-functional gas hydrate inhibition of tetramethylammonium chloride for carbon dioxide-methane mixed gas systems. Fuel, 305.

Mohammed, S.A.S. and Yahya, W.Z.N. and Bustam, M.A. and Kibria, M.G. (2021) Elucidation of the roles of ionic liquid in co2 electrochemical reduction to value-added chemicals and fuels. Molecules, 26 (22).

Mustafa, H.M. and Hayder, G. and Jagaba, A.H. (2021) Microalgae: A renewable source for wastewater treatment and feedstock supply for biofuel generation. Biointerface Research in Applied Chemistry, 11 (1). pp. 7431-7444.

Musa, S.G. and Aljunid Merican, Z.M. and Akbarzadeh, O. (2021) Study on selected metal-organic framework-based catalysts for cycloaddition reaction of co2 with epoxides: A highly economic solution for carbon capture and utilization. Polymers, 13 (22).

Memon, M.K. and Elraies, K.A. and Al-Mossawy, M.I.A. (2021) Surfactant screening to generate strong foam with formation water and crude oil. Journal of Petroleum Exploration and Production Technology, 11 (9). pp. 3521-3532.

Mustafa Abro, G.E. and Zulkifli, S.A.B.M. and Khan, M.S.A. and Asirvadham, V.S. (2021) Single dimension-based fuzzy sliding mode control design for the stabilisation of underactuated unmanned underwater vehicle. International Journal of Modelling, Identification and Control, 39 (4). pp. 303-314.

Mustafa Abro, G.E. and Zulkifli, S.A. and Asirvadam, V.S. and Ali, Z.A. and Mathur, N. and Kumar, R. (2021) Modeling, Controlling & Stabilization of An Underactuated Air-Cushion Vehicle (ACV). Proceedings of the 2021 IEEE International Conference on Signal and Image Processing Applications, ICSIPA 2021.

Mansor, Mohd Radzi Abu and Mohamad, Taib Iskandar and Sabah, Osama (2021) Numerical investigation on combustion and emissions in a direct injection compression ignition engine fuelled with various hydrogen—methane—diesel blends at different intake air temperatures. Energy Reports, 7. pp. 403-421.

MARIMUTHU, Maran and KHAN, Hanana and BANGASH, Romana (2021) Fiscal causal hypotheses and panel cointegration analysis for sustainable economic growth in ASEAN. The Journal of Asian Finance, Economics and Business, 8 (2). pp. 99-109.

Marimuthu, Maran and Khan, Hanana and Bangash, Romana (2021) Reverse causality between fiscal and current account deficits in ASEAN: Evidence from panel econometric analysis. Mathematics, 9 (10). p. 1124.

Mohamed Saheed, Mohamed Salleh and Mohamed, Norani Muti and Mahinder Singh, Balbir Singh and Wali, Qamar and Saheed, Mohamed Shuaib Mohamed and Jose, Rajan (2021) Foam-like 3D Graphene as a Charge Transport Modifier in Zinc Oxide Electron Transport Material in Perovskite Solar Cells. Photochem, 1 (3). pp. 523-536.

Mumtaz, Farhan and Yahaya, Nor Zaihar and Meraj, Sheikh Tanzim and Singh, Balbir and Kannan, Ramani and Ibrahim, Oladimeji (2021) Review on non-isolated DC-DC converters and their control techniques for renewable energy applications. Ain Shams Engineering Journal, 12 (4). pp. 3747-3763.

Md Said, Nur Hidayah and Liu, Wei-Wen and Khe, Cheng-Seong and Lai, Chin-Wei and Zulkepli, Nik Noriman and Aziz, Azizan (2021) Review of the past and recent developments in functionalization of graphene derivatives for reinforcement of polypropylene nanocomposites. Polymer Composites, 42 (3). pp. 1075-1108.

N

Nazir, Liyana Salwa Mohd and Yeong, Yin Fong and Chew, Thiam Leng (2021) Study on the effect of seed particle size toward the formation of NaX zeolite membranes via vacuum-assisted seeding technique. Journal of Asian Ceramic Societies, 9 (2). pp. 586-597.

Nazar, Masooma and Shah, Mansoor Ul Hassan and Yahya, Wan Zaireen Nisa and Goto, Masahiro and Moniruzzaman, Muhammad (2021) Surface active ionic liquid and Tween-80 blend as an effective dispersant for crude oil spill remediation. Environmental Technology & Innovation, 24. p. 101868.

Ng, ELH and Lau, KK and Lau, WJ and Ahmad, Faizan (2021) Holistic review on the recent development in mathematical modelling and process simulation of hollow fiber membrane contactor for gas separation process. Journal of Industrial and Engineering Chemistry, 104. pp. 231-257.

Ng, ELS and Lau, KK and Partoon, B and Lim, SF and Chin, SY (2021) Selection Criteria for Antifoams Used in the Acid Gas Sweetening Process. Industrial & Engineering Chemistry Research, 60 (37). pp. 13438-13462.

Nguyen, Thanh Tien and Lam, Man Kee and Cheng, Yoke Wang and Uemura, Yoshimitsu and Mansor, Nurlidia and Lim, Jun Wei and Show, Pau Loke and Tan, Inn Shi and Lim, Steven (2021) Reaction kinetic and thermodynamics studies for in-situ transesterification of wet microalgae paste to biodiesel. Chemical Engineering Research and Design, 169. pp. 250-264.

Nawaz, Muhammad and Maulud, Abdulhalim Shah and Zabiri, Haslinda and Taqvi, Syed Ali Ammar and Idris, Alamin (2021) Improved process monitoring using the CUSUM and EWMA-based multiscale PCA fault detection framework. Chinese Journal of Chemical Engineering, 29. pp. 253-265.

Nadeem, Saad and Mumtaz, Asad and Alnarabiji, Mohamad Sahban and Mutalib, Mohamed Ibrahim Abdul and Abdullah, Bawadi (2021) Highly porous Zr-MCM-48 immobilized Cu-porphyrin for photocatalytic reduction of CO 2 to methanol in a slurry reactor. Journal of Materials Science: Materials in Electronics, 32. pp. 22060-22075.

Nong, Linh Xuan and Nguyen, Vinh Huu and Bach, Long Giang and Tran, Thuan Van and Hong, Seong Soo and Abdullah, Bawadi and Hien, Nguyen Khoa and Nguyen, Trinh Duy (2021) Crystal violet degradation over BiVO4 photocatalyst under visible light irradiation. Chemical Engineering Communications, 208 (4). pp. 530-538.

Nor, A.K.M. and Pedapati, S.R. and Muhammad, M. (2021) Reliability engineering applications in electronic, software, nuclear and aerospace industries: A 20 year review (2000â��2020). Ain Shams Engineering Journal.

Naidua, T and Qadir, D and Nasir, R and Mannan, HA and Mukhtar, H and Maqsood, K and Ali, A and Abdulrahman, A (2021) Utilization of moringa oleifera and nanofiltration membrane to treat palm oil mill effluent (POME). Materialwissenschaft und Werkstofftechnik, 52 (3). pp. 346-356.

Nasir, Rizwan and Mohshim, Dzeti Farhah and Mannan, Hafiz Abdul and Qadir, Danial and Mukhtar, Hilmi and Maqsood, Khuram and Ali, Abulhassan and Maulianda, Belladonna and Abdulrahman, Aymn and Mahfouz, Abdullah Bin (2021) A perspective on ionic liquid-based membranes for CO 2 separation. Chemical Papers, 75. pp. 839-852.

Nasir, Rizwan and Rashid, Tazien and Maqsood, Khuram and Qadir, Danial and Mohshim, Dzeti Farhah and Ali, Abulhassan and Suleman, Humbul and Mannan, Hafiz Abdul and Mukhtar, Hilmi and Abdulrahman, Aymn (2021) Lignin Nanoparticles and Their Biodegradable Composites. Green Composites. pp. 295-327.

Nikbakht, E. and Wong Weng Lok, J. and Teo, W. (2021) Structural behaviour of novel composite beams consisting of geopolymer concrete and high-performance concrete. Structures, 32. pp. 106-115.

Naz, M.Y. and Shukrullah, S. and Noman, M. and Yaseen, M. and Naeem, M. and Sulaiman, S.A. (2021) Effect of Water-Mixed Polyvinyl Alcohol Viscosity on Wear Response of Carbon Steel Exposed to an Eroding Medium. Journal of Materials Engineering and Performance, 30 (3). pp. 2066-2073.

Naidua, T. and Qadir, D. and Nasir, R. and Mannan, H.A. and Mukhtar, H. and Maqsood, K. and Ali, A. and Abdulrahman, A. (2021) Utilization of moringa oleifera and nanofiltration membrane to treat palm oil mill effluent (POME) Einsatz von Moringa oleifera und Nanofiltrationsmembranen zur Behandlung von PalmÃ¶l-MÃ¼hlenabwasser. Materialwissenschaft und Werkstofftechnik, 52 (3). pp. 346-356.

Nadeem, S. and Mumtaz, A. and Alnarabiji, M.S. and Mutalib, M.I.A. and Abdullah, B. (2021) Highly porous Zr-MCM-48 immobilized Cu-porphyrin for photocatalytic reduction of CO2 to methanol in a slurry reactor. Journal of Materials Science: Materials in Electronics.

Naseer, S. and Ali, R.F. and Fati, S.M. and Muneer, A. (2021) INitroY-Deep: Computational Identification of Nitrotyrosine Sites to Supplement Carcinogenesis Studies Using Deep Learning. IEEE Access, 9. pp. 73624-73640.

New, E.K. and Wu, T.Y. and Voon, K.S. and Procentese, A. and Shak, K.P.Y. and Teoh, W.H. and Lim, J.W. and Md. Jahim, J. (2021) A Utilization of Choline Chloride-Based Deep Eutectic Solvent Integrated with Alkaline Earth Metal Hexahydrate in the Pretreatment of Oil Palm Fronds. Industrial and Engineering Chemistry Research, 60 (5). pp. 2011-2026.

Nguyen, V.-H. and Shahedi Asl, M. and Delbari, S.A. and Le, Q.V. and Sabahi Namini, A. and Cha, J.H. and Lee, S.-H. and Jang, H.W. and Mustapha, M. and Mohammadi, M. and Shokouhimehr, M. (2021) Microstructural evolution during spark plasma sintering of TiCâ��AlNâ��graphene ceramics. International Journal of Refractory Metals and Hard Materials, 96.

Naqvi, S.R. and Naqvi, M. and Ammar Taqvi, S.A. and Iqbal, F. and Inayat, A. and Khoja, A.H. and Mehran, M.T. and Ayoub, M. and Shahbaz, M. and Saidina Amin, N.A. (2021) Agro-industrial residue gasification feasibility in captive power plants: A South-Asian case study. Energy, 214.

Naseer, H. and Gilani, S.I.-H. and Al-Kayiem, H.H. and Ahmad, N. (2021) Nanofluids application in solar thermal collectors. Green Energy and Technology. pp. 93-114.

Nasir, R. and Mohshim, D.F. and Mannan, H.A. and Qadir, D. and Mukhtar, H. and Maqsood, K. and Ali, A. and Maulianda, B. and Abdulrahman, A. and Mahfouz, A.B. (2021) A perspective on ionic liquid-based membranes for CO2 separation. Chemical Papers, 75 (3). pp. 839-852.

Ng, K.H. and Lai, S.Y. and Cheng, C.K. and Cheng, Y.W. and Chong, C.C. (2021) Photocatalytic water splitting for solving energy crisis: Myth, Fact or Busted? Chemical Engineering Journal, 417.

Nguyen, H.T. and Lee, J.H. and Elraies, K.A. (2021) Pseudo-three-dimensional simulations of a vertical hydraulic fracture with time-dependent injection rates. Petroleum Science and Technology.

Nizamani, Z. and Na, L.L. and Nakayama, A. and Ali, M.O.A. and Nizamani, M.A. (2021) Renewable wave energy potential for the sustainable offshore oil platforms in South China Sea. IEEE Access, 9. pp. 116973-116993.

Naseer, S. and Ali, R.F. and Khan, Y.D. and Dominic, P.D.D. (2021) iGluK-Deep: computational identification of lysine glutarylation sites using deep neural networks with general pseudo amino acid compositions. Journal of Biomolecular Structure and Dynamics.

Nurika, O. and Jung, L.T. (2021) Enhanced European Internet of Things (IoT) Platform Assessment Key Performance Indicators (KPIs). Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering, LNICST, 382. pp. 137-153.

Nugraha, M.W. and Sambudi, N.S. and Kasmiarno, L.D. and Kamal, N.A. (2021) The effect of amino-functionalization on photoluminescence properties of sugarcane bagasse-derived carbon quantum dots. ASEAN Journal of Chemical Engineering, 21 (1). pp. 62-72.

Naseer, S. and Ali, R.F. and Muneer, A. and Fati, S.M. (2021) Iamidev-deep: Valine amidation site prediction in proteins using deep learning and pseudo amino acid compositions. Symmetry, 13 (4).

Nordin, M. and Sugathan, S.K. and Arshad, N.I. and Zaffar, M. (2021) E-WASTE from TECHNOLOGY USE in the OIL and GAS SECTOR: The SNEAK PEEK. Journal of Theoretical and Applied Information Technology, 99 (24). pp. 6210-6221.

Ng, E.L.H. and Lau, K.K. and Lau, W.J. and Ahmad, F. (2021) Holistic review on the recent development in mathematical modelling and process simulation of hollow fiber membrane contactor for gas separation process. Journal of Industrial and Engineering Chemistry, 104. pp. 231-257.

Nor, A.K.M. and Pedapati, S.R. and Muhammad, M. and Leiva, V. (2021) Overview of explainable artificial intelligence for prognostic and health management of industrial assets based on preferred reporting items for systematic reviews and meta-analyses. Sensors, 21 (23).

Nawaz, R. and Kait, C.F. and Chia, H.Y. and Isa, M.H. and Huei, L.W. and Sahrin, N.T. (2021) Synthesis of Black-TiO2 and manganese-doped TiO2 nanoparticles and their comparative performance evaluation for photocatalytic removal of phenolic compounds from agro-industrial effluent. Journal of Nanoparticle Research, 23 (12).

Naz, M.Y. and Bou-Rabee, M. and Shukrullah, S. and Ghaffar, A. and Gungor, A. and Sulaiman, S.A. (2021) A review of hybrid energy technologies tenets, controls and combinational strategies. Cleaner Engineering and Technology, 5.

Noura, S. and Al-Sabaeei, A.M. and Safaeldeen, G.I. and Muniandy, R. and Carter, A. (2021) Evaluation of measured and predicted resilient modulus of rubberized Stone Mastic Asphalt (SMA) modified with truck tire rubber powder. Case Studies in Construction Materials, 15.

Naz, S. and Uroos, M. and Ayoub, M. (2021) Cost-Effective Processing of Carbon-Rich Materials in Ionic Liquids: An Expeditious Approach to Biofuels. ACS Omega, 6 (43). pp. 29233-29242.

Nazar, M. and Shah, M.U.H. and Yahya, W.Z.N. and Goto, M. and Moniruzzaman, M. (2021) Surface active ionic liquid and Tween-80 blend as an effective dispersant for crude oil spill remediation. Environmental Technology and Innovation, 24.

Nurddin, S.M.A.S.M. and Sufian, S. and Man, Z. and Rabat, N.E. and Ahmad, N. (2021) Effectiveness of Sequential Pre-treatment and Application of High-porosity Hybrid Fly Ash Geopolymer/alginate Adsorbent for the Treatment of Batik Wastewater. Journal of Chemical Health Risks, 11 (4). pp. 345-356.

O

Osman, A. and Zulkifli, N. and Said, M.A. and Tuan Kamaruddin, T.N.A. (2021) Experimental study on recoverable thermal energy from low thermal inertia exhaust heat recovery unit. Advances in Mechanical Engineering, 13 (6).

Othman, I. and Al-Ashmori, Y.Y. and Rahmawati, Y. and Mugahed Amran, Y.H. and Al-Bared, M.A.M. (2021) The level of Building Information Modelling (BIM) Implementation in Malaysia. Ain Shams Engineering Journal, 12 (1). pp. 455-463.

Oladosu, T.L. and Al-Kayiem, H.H. and Gilani, S.I.U. and Baheta, A.T. (2021) Dehumidification and thermal regeneration characterization of binary deep eutectic solvents in liquid desiccant air conditioning systems. Journal of Building Engineering, 42.

Othman, I. and Kineber, A.F. and Oke, A.E. and Zayed, T. and Buniya, M.K. (2021) Barriers of value management implementation for building projects in Egyptian construction industry. Ain Shams Engineering Journal, 12 (1). pp. 21-30.

Ong, A.C.W. and Shamsuri, N.A. and Zaine, S.N.A. and Panuh, D. and Shukur, M.F. (2021) Nanocomposite polymer electrolytes comprising starch-lithium acetate and titania for all-solid-state supercapacitor. Ionics, 27 (2). pp. 853-865.

Oke, A.E. and Kineber, A.F. and Albukhari, I. and Othman, I. and Kingsley, C. (2021) Assessment of cloud computing success factors for sustainable construction industry: The case of Nigeria. Buildings, 11 (2). pp. 1-15.

Oke, A.E. and Kineber, A.F. and Al-Bukhari, I. and Famakin, I. and Kingsley, C. (2021) Exploring the benefits of cloud computing for sustainable construction in Nigeria. Journal of Engineering, Design and Technology.

Othman, I. and Ghafar, N.H.A. and Choon, S.W. (2021) The effectiveness implementation of project risk management plan in property development in malaysia. Lecture Notes in Civil Engineering, 132. pp. 663-668.

Othman, I. and Dardaâ��U Rafindadi, A. and Napiah, M. and MikiÄ�, M. and Ahmad, H. and Aliyuyaro, N.S. and Isah, B.W. and Kineber, A.F. and Buniya, M.K. (2021) Development of framework for bim-based tools to minimize the causes of accidents in construction. Lecture Notes in Civil Engineering, 132. pp. 608-619.

Oke, A.E. and Farouk Kineber, A. and Abdel-Tawab, M. and Abubakar, A.S. and Albukhari, I. and Kingsley, C. (2021) Barriers to the implementation of cloud computing for sustainable construction in a developing economy. International Journal of Building Pathology and Adaptation.

Oke, A.E. and Kineber, A.F. and Albukhari, I. and Dada, A.J. (2021) Modeling the robotics implementation barriers for construction projects in developing countries. International Journal of Building Pathology and Adaptation.

Okunade, O.A. and Yekeen, N. and Padmanabhan, E. and Al-Yaseri, A. and Idris, A.K. and Khan, J.A. (2021) Shale core wettability alteration, foam and emulsion stabilization by surfactant: Impact of surfactant concentration, rock surface roughness and nanoparticles. Journal of Petroleum Science and Engineering, 207.

Ong, Samantha K and Husain, Syeda F and Wee, Hai Ning and Ching, Jianhong and Kovalik, Jean-Paul and Cheng, Man Si and Schwarz, Herbert and Tang, Tong Boon and Ho, Cyrus S (2021) Integration of the cortical haemodynamic response measured by functional near-infrared spectroscopy and amino acid analysis to aid in the diagnosis of major depressive disorder. Diagnostics, 11 (11). p. 1978.

P

Pysal, D. and Abdulkadir, S.J. and Mohd Shukri, S.R. and Alhussian, H. (2021) Classification of children's drawing strategies on touch-screen of seriation objects using a novel deep learning hybrid model. Alexandria Engineering Journal, 60 (1). pp. 115-129.

Phan, T.H. and Tran, D.C. and Hassan, M.F. (2021) Vietnamese character recognition based on cnn model with reduced character classes. Bulletin of Electrical Engineering and Informatics, 10 (2). pp. 962-969.

Praikaew, W. and Kiatkittipong, W. and Aiouache, F. and Najdanovic-Visak, V. and Ngaosuwan, K. and Wongsawaeng, D. and Lim, J.W. and Lam, S.S. and Kiatkittipong, K. and Laosiripojana, N. and Boonyasuwat, S. and Assabumrungrat, S. (2021) Process and energy intensification of glycerol carbonate production from glycerol and dimethyl carbonate in the presence of eggshell-derived cao heterogeneous catalyst. Energies, 14 (14).

Palli, A.S. and Jaafar, J. and Hashmani, M.A. (2021) Performance Degradation of Multi-class Classification Model Due to Continuous Evolving Data Streams. Lecture Notes on Data Engineering and Communications Technologies, 72. pp. 696-706.

Palanidoss, S. and Thazhathu, S.V. and Bhaskar, M.S. and Kannan, R. and Baboli, P.T. (2021) Comprehensive review of single stage switched boost inverter structures. IET Power Electronics.

Prakash, K.B. and Kannan, R. and Alexander, S.A. and Kanagachidambaresan, G.R. (2021) Preface. EAI/Springer Innovations in Communication and Computing. vii-viii.

Patil, S.S. and Deshannavar, U.B. and Ramasamy, M. and Hegde, P.G. (2021) Modeling and optimisation studies on the ultrasound-assisted extraction of phenolic compounds from Azadirachta indica. Chemical Engineering Communications.

Priyono, A. and Darmawan, B. and Witjaksono, G. (2021) How to harnesses digital technologies for pursuing business model innovation: a longitudinal study in creative industries. Journal of Systems and Information Technology, 23 (3-4). pp. 266-289.

Permanasari, A.E. and Hidayat, D.A. and Wibirama, S. and Sakkinah, I.S. and Rambli, D.R.A. (2021) Development of a hospital virtual tour with virtual reality-based panorama. International Journal of Innovation and Learning, 30 (2). pp. 119-131.

Permanasari, A.A. and Mauludi, M.N. and Sukarni, S. and Puspitasari, P. and Zaine, S.N.A. and Wahyunengsih, W. (2021) The Potential of Waste Cooking Oil B20 Biodiesel Fuel with Lemon Essential Oil Bioadditive: Physicochemical Properties, Molecular Bonding, and Fuel Consumption. Bulletin of Chemical Reaction Engineering & Catalysis, 16 (3). pp. 555-564.

Patil, S.S. and Deshannavar, U.B. and Ramasamy, M. and Emani, S. and Khalilpoor, N. and Issakhov, A. (2021) Study of Extraction Kinetics of Total Polyphenols from Curry Leaves. International Journal of Chemical Engineering, 2021.

Patil, R.A. and Deshannavar, U.B. and Ramasamy, M. and Emani, S. and Issakhov, A. and Khalilpoor, N. (2021) Briquetting of Dry Sugarcane Leaves by Using Press Mud, Cow Dung, and Buffalo Dung as Binders. International Journal of Chemical Engineering, 2021.

Q

Qasim, Ali and Heurtas, Jeremy and Khan, Muhammad Saad and Lal, Bhajan and Shariff, Azmi Mohammad and Cezac, Pierre and Foo, Khor Siak and Sundramoorthy, Jega Divan (2021) Thermodynamic modeling of electrolytic solutions of ionic liquids for gas hydrates inhibition applications. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 81 (2). pp. 110-123.

Qasim, Ali and Khan, Muhammad Saad and Lal, Bhajan and Shariff, Azmi Mohd and Ismail, Mokhtar Che (2021) Evaluation of tetramethylammonium acetate as corrosion suppressor for flow assurance applications. Materials Today: Proceedings, 47. pp. 1355-1358.

Qadeer, Muhammad Umer and Ayoub, Muhammad and Komiyama, Masaharu and Daulatzai, Muteeb Ullah Khan and Mukhtar, Ahmad and Saqib, Sidra and Ullah, Sami and Qyyum, Muhammad Abdul and Asif, Saira and Bokhari, Awais (2021) Review of biodiesel synthesis technologies, current trends, yield influencing factors and economical analysis of supercritical process. Journal of Cleaner Production, 309. p. 127388.

Qasim, M. and Ayoub, M. and Ghazali, N.A. and Aqsha, A. and Ameen, M. (2021) Recent Advances and Development of Various Oxygen Carriers for the Chemical Looping Combustion Process: A Review. Industrial and Engineering Chemistry Research, 60 (24). pp. 8621-8641.

Qadir, Danial and Nasir, Rizwan and Mukhtar, Hilmi and Uddin, Fahim (2021) Performance prediction of flat sheet commercial nanofiltration membrane using Donnan-Steric Pore Model. Membrane and Water Treatment, 12 (2). pp. 59-64.

Qadir, Danial and Nasir, Rizwan and Mannan, Hafiz Abdul and Mukhtar, Hilmi and Maqsood, Khuram and Ali, A and sau ALSHDADI, ABDULRAHMAN A (2021) Utilization of moringa oleifera and nanofiltration membrane to treat palm oil mill effluent (POME). Materialwissenschaft und Werkstofftechnik, 52 (3). pp. 346-356.

Qasim, M. and Ayoub, M. and Aqsha, A. and Zulfiqar, M. (2021) Preparation of Metal Oxide-based Oxygen Carriers Supported with CeO2 and Î³-Al2O3 for Chemical Looping Combustion. Chemical Engineering and Technology, 44 (4). pp. 782-787.

Qadeer, M.U. and Ayoub, M. and Komiyama, M. and Khan Daulatzai, M.U. and Mukhtar, A. and Saqib, S. and Ullah, S. and Qyyum, M.A. and Asif, S. and Bokhari, A. (2021) Review of biodiesel synthesis technologies, current trends, yield influencing factors and economical analysis of supercritical process. Journal of Cleaner Production, 309.

Qian, Y. and Aghaabbasi, M. and Ali, M. and Alqurashi, M. and Salah, B. and Zainol, R. and Moeinaddini, M. and Hussein, E.E. (2021) Classification of imbalanced travel mode choice to work data using adjustable svm model. Applied Sciences (Switzerland), 11 (24).

Qureshi, S. and StojanoviÄ�, G.M. and SimiÄ�, M. and Jeoti, V. and Lashari, N. and Sher, F. (2021) Silver conductive threads-based embroidered electrodes on textiles as moisture sensors for fluid detection in biomedical applications. Materials, 14 (24).

R

Ruslan, Muhammad Syafiq Hazwan and Bilad, Muhammad Roil and Noh, Mohd Hilmi and Sufian, Suriati (2021) Integrated project-based learning (IPBL) implementation for first year chemical engineering student: DIY hydraulic jack project. Education for chemical engineers, 35. pp. 54-62.

Riaz, Nadia and Fen, Debra Adelina Chia Siew and Khan, Muhammad Saqib and Naz, Sadia and Sarwar, Rizwana and Farooq, Umar and Bustam, Mohamad Azmi and Batiha, Gaber El-Saber and El Azab, Islam H and Uddin, Jalal and others (2021) Iron-zinc co-doped titania nanocomposite: Photocatalytic and photobiocidal potential in combination with molecular docking studies. Catalysts, 11 (9). p. 1112.

Raja, Yugadarshni Samudra and Samsudin, Mohamad Fakhrul Ridhwan and Sufian, Suriati (2021) Development of the Low-Cost and Green Hibiscus cannabinus Bioadsorbent for the Removal of Dye in Wastewater. Arabian Journal for Science and Engineering, 46. pp. 6349-6358.

Rosli, Mohd AF and Aziz, A Rashid A and Ismael, Mhadi A and Elbashir, Nimir O and Baharom, Masri and Mohammed, Salah E and others (2021) Experimental study of micro-explosion and puffing of gas-to-liquid (GTL) fuel blends by suspended droplet method. Energy, 218. p. 119462.

Raja Ahsan Shah, Raja Mazuir and Jones, Richard Peter and Cheng, Caizhen and Picarelli, Alessandro and Abd Aziz, Abd Rashid and Al Qubeissi, Mansour (2021) Model-Based Energy Path Analysis of Tip-In Event in a 2WD Vehicle with Range-Extender Electric Powertrain Architecture. Energies, 14 (18). p. 5696.

Rana, Zaid Ashraf and Khor, Cheng Seong and Zabiri, Haslinda (2021) Computational Experience with Piecewise Linear Relaxations for Petroleum Refinery Planning. Processes, 9 (9). p. 1624.

Rafiei, Alireza and Loni, Reyhaneh and Najafi, Gholamhassan and Mahadzir, Shuhaimi B and Bellos, Evangelos and Sharifpur, Mohsen and Mazlan, Mohamed (2021) Assessment of a solar-driven cogeneration system for electricity and desalination. Journal of Thermal Analysis and Calorimetry, 145. pp. 1711-1731.

Ruslan, A.A.B. and Al-Atesh, E.A. and Rahmawati, Y. and Utomo, C. and Zawawi, N.A.W.A. and Jahja, M. and Raflis and Elmansoury, A. (2021) A Value-Based Decision-Making Model for Selecting Sustainable Materials for Buildings. International Journal on Advanced Science, Engineering and Information Technology, 11 (6). pp. 2279-2286.

Rasool, F. and Drieberg, M. and Badruddin, N. and Sebastian, P. and Qian, C.T.J. (2021) Electrical battery modeling for applications in wireless sensor networks and internet of things. Bulletin of Electrical Engineering and Informatics, 10 (4). pp. 1793-1802.

Ragab, M.G. and Abdulkadir, S.J. and Aziz, N. and Alhussian, H. and Bala, A. and Alqushaibi, A. (2021) An ensemble one dimensional convolutional neural network with bayesian optimization for environmental sound classification. Applied Sciences (Switzerland), 11 (10).

Razak, N.N.A. and Abdulkadir, S.J. and Maoinser, M.A. and Shaffee, S.N.A. and Ragab, M.G. (2021) Oneâ��dimensional convolutional neural network with adaptive moment estimation for modelling of the sand retention test. Applied Sciences (Switzerland), 11 (9).

Rana, M.M. and Romlie, M.F. and Abdullah, M.F. and Uddin, M. and Rahman, M.O. (2021) Modeling of an isolated microgrid with hybrid PV-BESS system for peak load shaving simulation. International Journal of Advanced Technology and Engineering Exploration, 8 (75). pp. 352-361.

Rafiq, W. and Napiah, M. and Habib, N.Z. and Sutanto, M.H. and Alaloul, W.S. and Khan, M.I. and Musarat, M.A. and Memon, A.M. (2021) Modeling and design optimization of reclaimed asphalt pavement containing crude palm oil using response surface methodology. Construction and Building Materials, 291.

Rostami, A. and Yahaya, N. and Soleimani, H. and Rauf, M. and Nyamasvisva, T.E. and Shafie, A. and Khosravi, V. and Ganeson, M. (2021) Source modification for efficiency enhancement of marine controlled-source electromagnetic method. Journal of Geophysics and Engineering, 18 (2). pp. 253-267.

Rashid, S. and Bashir, F. and Khanday, F.A. and Rafiq Beigh, M. and Hussin, F.A. (2021) 2-D Design of Double Gate Schottky Tunnel MOSFET for High-Performance Use in Analog/RF Applications. IEEE Access, 9. pp. 80158-80169.

Rana, M.M. and Romlie, M.F. and Abdullah, M.F. and Uddin, M. and Sarkar, M.R. (2021) A novel peak load shaving algorithm for isolated microgrid using hybrid PV-BESS system. Energy, 234.

Rashid, M.I. and Ali, C.H. and Mukhtar, K. and Benhelal, E. and Athar, M. (2021) Operational discipline in practice. Process Safety Progress, 40 (2).

Rizki, M. and Joewono, T.B. and Dharmowijoyo, D.B.E. and Belgiawan, P.F. (2021) Does multitasking improve the travel experience of public transport users? Investigating the activities during commuter travels in the Bandung Metropolitan Area, Indonesia. Public Transport, 13 (2). pp. 429-454.

Rosli, M.A.F. and Aziz, A.R.A. and Ismael, M.A. and Elbashir, N.O. and Zainal A., E.Z. and Baharom, M. and Mohammed, S.E. (2021) Experimental study of micro-explosion and puffing of gas-to-liquid (GTL) fuel blends by suspended droplet method. Energy, 218.

Rizvi, S.S.H. and Zubair, M. and Ahmad, J. and Hashmani, M. and Khan, M.W. (2021) Wireless Communication as a Reshaping Tool for Internet of Things (IoT) and Internet of Underwater Things (IoUT) Business in Pakistan: A Technical and Financial Review. Wireless Personal Communications, 116 (2). pp. 1087-1105.

Rehman, A. and Hassan, M.F. and Hooi, Y.K. and Qureshi, M.A. and Chung, T.D. and Akbar, R. and Safdar, S. (2021) Context and machine learning based trust management framework for internet of vehicles. Computers, Materials and Continua, 68 (3). pp. 4125-4142.

Ruhaizat, N.E. and Yusuf, N.K. and Lajis, M.A. and Mazlan, A.K. and Muktari, A.A. and Ahmad, A. (2021) Effect of Hot Press Forging Parameter on Microstructural Analysis and Mechanical Properties in Direct Recycling of Aluminium Aircraft Alloy (AA7075). Lecture Notes in Mechanical Engineering, 46. pp. 279-288.

Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2021) Stability Analysis of Partial Slip Texture Journal Bearing. Lecture Notes in Mechanical Engineering. pp. 217-225.

Redzuan, S. and Ho, C.Y. and Idham, Z. and Yusuf, S. and Putra, N.R. and Yunus, M.A.C. and Mansor, S. and Ruslan, M.S.H. (2021) Optimization of Anthocyanins Extracts from Roselle (Hibiscus sabdarifa) Petals Using Ultrasonic-Assisted Extraction Method. Lecture Notes in Mechanical Engineering. pp. 295-309.

Rahman, M.T. and Negash, B.M. and Danso, D.K. and Idris, A. and Elryes, A.A. and Umar, I.A. (2021) Effects of imidazolium- and ammonium-based ionic liquids on clay swelling: experimental and simulation approach. Journal of Petroleum Exploration and Production Technology.

Rasool, M.H. and Zamir, A. and Elraies, K.A. and Ahmad, M. and Ayoub, M. and Abbas, M.A. and Ali, I. (2021) Rheological characterization of potassium carbonate deep eutectic solvent (DES) based drilling mud. Journal of Petroleum Exploration and Production Technology.

Rauf, M. and Rostami, A. and Nyamasvisva, T.E. and Jamil, A. (2021) Enhancing Electromagnetic Field Over Resistive Offshore Hydrocarbon Using Synthetic Conduction Current Incurvature. Arabian Journal for Science and Engineering.

Rashid, M.I. and Tabish, A.N. and Athar, M. (2021) Process safety management and process hazard analysis implementation progress in Pakistan chemical process industries. Process Safety Progress.

Rahman, M. and Dzulkarnain, I. (2021) RSM for Modelling the CO2 Effect in the Interfacial Tension Between Brine and Waxy Dulang Crude Oil During LSW-WAG EOR. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 85 (2). pp. 159-174.

Rehman, O.U. and Ramasamy, M.G. and Rozali, N.E.M. and Deshannavar, U.B. (2021) Determination of Limiting Heat Flux for The Inception of Nucleate Boiling Regime for Crude Oils. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 85 (2). pp. 115-127.

Ridha, S. and Dzulkarnain, I. and Abdurrahman, M. and Ilyas, S.U. and Bataee, M. (2021) Microstructural properties and compressive strength of fly ash-based geopolymer cement immersed in CO2-saturated brine at elevated temperatures. International Journal of Environmental Science and Technology.

Razak, M.A.A.A. and Ismail, A. and Rahman, F.A. and Baharudin, B.A. and Khalili, M.A. and Rahim, M.Y.M. and Awang, M. (2021) Experimental Study on Self-Supported Friction Stir Welding on AA5083 Plate Butt Joints. Advanced Structured Materials, 147. pp. 293-298.

Rahman, A.S.A. and Masrom, S. and Rahman, R.A. and Ibrahim, R. (2021) Rapid software framework for the implementation of machine learning classification models. International Journal of Emerging Technology and Advanced Engineering, 11 (8). pp. 8-18.

Rahman, R.A. and Masrom, S. and Zakaria, N.B. and Nurdin, E. and Abd Rahman, A.S. (2021) Prediction of earnings manipulation on Malaysian listed firms: A comparison between linear and tree-based machine learning. International Journal of Emerging Technology and Advanced Engineering, 11 (8). pp. 111-120.

Rahmah, A.U. and Harimurti, S. and Kurnia, K.A. and Omar, A.A. and Murugesan, T. (2021) Oxytetracycline mineralization inside a UV/H2O2 system of advanced oxidation processes: Inorganic by-product. Bulletin of Chemical Reaction Engineering & Catalysis, 16 (2). pp. 302-309.

Rasool, M.H. and Zamir, A. and Elraies, K.A. and Ahmad, M. and Ayoub, M. and Abbas, M.A. (2021) Potassium carbonate based deep eutectic solvent (DES) as a potential drilling fluid additive in deep water drilling applications. Petroleum Science and Technology, 39 (15-16). pp. 612-631.

Rahman, S.H.A. and Zulkarnain, N.N. and Shafiq, N. (2021) Experimental study and design of experiment using statistical analysis for the development of geopolymer matrix for oil-well cementing for enhancing the integrity. Crystals, 11 (2).

Rosdin, R.D.B. and Yusuf, M. and Abdullah, B. (2021) Dry reforming of methane over Ni-based catalysts: Effect of ZrO2 and MgO addition as support. Materials Letters: X, 12.

Rahman, S.S.A. and Husen, M.H. and Soto, G.J. and Bing, S.B. and Jamin, N.H.M. and Rosli, R. and Poppelreiter, M.C. (2021) Application of spectral decomposition technique to delineate the evolution of karst on carbonate platforms of central luconia, offshore Sarawak, Malaysia. Applied Sciences (Switzerland), 11 (24).

Ramkumar, M. and Kumaraswamy, K. and Balasubramani, K. and Nagarajan, R. and Santosh, M. and Abdul Rahman, S. and Prasad, K.A. and Juni, K.J. and Fathima, A.L. and Siddiqui, N.A. and Mathew, M.J. and Menier, D. and Sautter, B. and Sharma, R. and Kumar, P. and Chopra, S. and Jegankumar, R. (2021) Neolithic cultural sites and extreme climate related channel avulsion: Evidence from the Vaigai River Basin, southern India. Journal of Archaeological Science: Reports, 40.

Rao, TVVLN and Kasolang, Salmiah Binti and Guoxin, Xie and Katiyar, Jitendra Kumar and Rani, Ahmad Majdi Abdul (2021) Biotribology: Emerging Technologies and Applications.

Rao, TVVLN and Kasolang, Salmiah Binti and Xie, Guoxin and Katiyar, Jitendra Kumar and Rani, Ahmad Majdi Abdul (2021) Green Tribology: Emerging Technologies and Applications.

Rao, TVVLN and Kasolang, Salmiah Binti and Xie, Guoxin and Katiyar, Jitendra Kumar and Rani, Ahmad Majdi Abdul (2021) Recent Developments in Green Tribology. Green Tribology. pp. 1-26.

Rani, Attia and Zulfiqar, Aniqa and Ahmad, Jamshad and Hassan, Qazi Mahmod Ul (2021) New soliton wave structures of fractional Gilson-Pickering equation using tanh-coth method and their applications. Results in Physics, 29. p. 104724.

Rao, TVVLN and Rani, Ahmad Majdi Abdul and Mohamed, Norani Muti and Ya, Hamdan Haji and Awang, Mokhtar and Hashim, Fakhruldin Mohd (2021) 15 Multi-Lobe Journal. Tribology and Sustainability. p. 251.

Rani, Attia and Ul-Hassan, Qazi Mahmood and Ashraf, Muhammad and Ahmad, Jamshad (2021) F-Expansion Method and Its Application for Finding Exact Analytical Solutions of Fractional order RLW Equation.

Riahi, Ali and Zakaria, Nor Azazi and Isa, Mohamed Hasnain and Zainol, Mohd Remy Rozainy Mohd Aref and Mahinder Singh, Balbir Singh and Shaharuddin, Syafiq and Yusof, Mohd Fazly (2021) Investigation on Productivity Enhancement of a Solar Still with Transparent Polythene Film Cover and Cylindrical Hollow Fins for Heat Storage. Journal of Ecological Engineering, 22 (1). pp. 95-103.

S

Stoessel, Francis (2021) Experiences on education of students and professionals in thermal process safety. Education for Chemical Engineers, 35. pp. 47-53.

Samsudin, Mohamad Fakhrul Ridhwan and Ullah, Habib and Tahir, Asif A and Li, Xiaohong and Ng, Yun Hau and Sufian, Suriati (2021) Superior photoelectrocatalytic performance of ternary structural BiVO4/GQD/g-C3N4 heterojunction. Journal of Colloid and Interface Science, 586. pp. 785-796.

Shah, Mansoor Ul Hassan and Reddy, Ambavaram Vijaya Bhaskar and Yusup, Suzana and Goto, Masahiro and Moniruzzaman, Muhammad (2021) Ionic liquid-biosurfactant blends as effective dispersants for oil spills: Effect of carbon chain length and degree of saturation. Environmental Pollution, 284. p. 117119.

Salehuddin, Nurliana Farhana and Mansor, Nurlidia and Yahya, Wan Zaireen Nisa and Noor Affendi, Nur Mahfuzah and Manogaran, M Devendran (2021) Organosulfur compounds as soil urease inhibitors and their effect on kinetics of urea hydrolysis. Journal of Soil Science and Plant Nutrition, 21. pp. 2652-2659.

Sajjad, Muhammad and Yusoff, Mohd Zuki and Yahya, Norashikin and Haider, Ali Shahbaz (2021) An efficient VLSI architecture for FastICA by using the algebraic Jacobi method for EVD. IEEE Access, 9. pp. 58287-58305.

Siow, Jing Han and Bilad, Muhammad Roil and Caesarendra, Wahyu and Leam, Jia Jia and Bustam, Mohammad Azmi and Sambudi, Nonni Soraya and Wibisono, Yusuf and Mahlia, Teuku Meurah Indra (2021) Progress in development of nanostructured manganese oxide as catalyst for oxygen reduction and evolution reaction. Energies, 14 (19). p. 6385.

Samsudin, Mohamad Fakhrul Ridhwan and Sufian, Suriati (2021) 14 Emerging. Nanomaterials for Water Treatment and Remediation. p. 447.

Samsudin, Mohamad Fakhrul Ridhwan and Ullah, Habib and Tahir, Asif A and Li, Xiaohong and Ng, Yun Hau and Sufian, Suriati (2021) Corrigendum to" Superior photoelectrocatalytic performance of ternary structural BiVO 4/GQD/gC 3 N 4 heterojunction"J. Col. Interf. Sci. 586 (2021) 785-796. Journal of colloid and interface science, 602. p. 900.

Saeed, Anwar Ameen Hezam and Harun, Noorfidza Yub and Sufian, Suriati and Bilad, Muhammad Roil and Zakaria, Zaki Yamani and Jagaba, Ahmad Hussaini and Ghaleb, Aiban Abdulhakim Saeed and Mohammed, Haetham G (2021) Pristine and magnetic kenaf fiber biochar for Cd2+ adsorption from aqueous solution. International journal of environmental research and public health, 18 (15). p. 7949.

Saeed, Anwar Ameen Hezam and Harun, Noorfidza Yub and Sufian, Suriati and Bilad, Muhammad Roil and Nufida, Baiq Asma and Ismail, Noor Maizura and Zakaria, Zaki Yamani and Jagaba, Ahmad Hussaini and Ghaleb, Aiban Abdulhakim Saeed and Al-Dhawi, Baker Nasser Saleh (2021) Modeling and optimization of biochar based adsorbent derived from Kenaf using response surface methodology on adsorption of Cd2+. Water, 13 (7). p. 999.

Shahid, Muhammad Zubair and Maulud, Abdulhalim Shah and Bustam, M Azmi and Suleman, Humbul and Halim, Hairul Nazirah Abdul and Shariff, Azmi M (2021) Packed column modelling and experimental evaluation for CO2 absorption using MDEA solution at high pressure and high CO2 concentrations. Journal of Natural Gas Science and Engineering, 88. p. 103829.

Sultan, Tahir and Zabiri, Haslinda and Taqvi, Syed Ali Ammar and Shahbaz, M (2021) Plant-wide MPC control scheme for CO2 absorption/stripping system. Materials Today: Proceedings, 42. pp. 191-200.

Samsudin, N.M. and Rahman, A.H.A. and Ismail, M.S. (2021) Soft-Sediment Structures in Mud-Dominated Turbidites of Pedawan Formation (Upper Jurassic - Cretaceous) along Jambusan-Semadang Road, Siburan, Sarawak, Malaysia. Petroleum and Coal, 63 (4). pp. 1048-1058.

Singh, Haswin Kaur Gurdeep and Yusup, Suzana and Quitain, Armando T and Abdullah, Bawadi and Inayat, Abrar and Ameen, Mariam and Cheah, Kin Wai and Sasaki, Mitsuru and Kida, Tetsuya and Chai, Yee Ho (2021) Five-lump kinetic approach on biofuel production from refined rubber seed oil over Cu/ZSM-5 catalyst via catalytic cracking reaction. Renewable Energy, 171. pp. 1445-1453.

Salam, Md Abdus and Islam, Thauhidul and Ahmed, Kawsar and Habib, Shehan and Abdullah, Bawadi and others (2021) Potential Feature of Combined AB5-Type Metal Hydride Tank and PEMFC as a Safer System for Hydrogen Fueling in Bangladesh. Frontiers in Energy Research. p. 748.

Salah Alaloul, W. and Al Salaheen, M. and Malkawi, A.B. and Alzubi, K. and Al-Sabaeei, A.M. and Ali Musarat, M. (2021) Utilizing of oil shale ash as a construction material: A systematic review. Construction and Building Materials, 299.

Suleman, Humbul and Maulud, Abdulhalim Shah and Fosbøl, Philip Loldrup and Nasir, Qazi and Nasir, Rizwan and Shahid, Muhammad Zubair and Nawaz, Muhammad and Abunowara, Mustafa (2021) A review of semi-empirical equilibrium models for CO2-alkanolamine-H2O solutions and their mixtures at high pressure. Journal of Environmental Chemical Engineering, 9 (1). p. 104713.

Suleman, Humbul and Thomsen, Kaj and Fosbøl, Philip Loldrup and Maulud, Abdulhalim Shah and Nasir, Rizwan (2021) A simple model for estimating hydrogen sulfide solubility in aqueous alkanolamines in the high pressure-high gas loading region. Journal of Sulfur Chemistry, 42 (4). pp. 410-425.

Samsudin, N.M. and Rahman, A.H.A. and Ismail, M.S. (2021) Sedimentology and Facies Analysis of the Pedawan Formation along Borneo Heights road, Siburan Area, Kuching, Sarawak, Malaysia. Petroleum and Coal, 63 (4). pp. 1004-1018.

Sayani, J.K.S. and Ho, K.J. and Lal, B. and Pedapati, S.R. (2021) Experimental and simulation studies on the phase behaviour for gas hydrates in a CO2 rich gas dominant multiphase pipeline system. Canadian Journal of Chemical Engineering.

Saad, S. and Alaloul, W.S. and Ammad, S. and Altaf, M. and Qureshi, A.H. (2021) Identification of critical success factors for the adoption of Industrialized Building System (IBS) in Malaysian construction industry. Ain Shams Engineering Journal.

Soon, F.K. and Hoon, T.P. and Latheef, M. and Yassin, A.Y.M. (2021) Green's function and finite element formulations for the dynamics of pipeline conveying fluid. Ships and Offshore Structures.

Sadrolhosseini, A.R. and Shafie, S. and Soleimani, H. and Mahdi, M.A. (2021) Polypyrrole-BaFe2O4 sensing layer for detection of strontium ion in aqueous solution using surface plasmon resonance curves fitting. Optics and Laser Technology, 140.

Samavati, A. and Samavati, Z. and Ismail, A.F. and Yahya, N. and Othman, M.H.D. and Rahman, M.A. (2021) Multi aspect investigation of crude oil concentration detecting via optical fiber sensor coated with ZnO/Ag nano-heterostructure. Measurement: Journal of the International Measurement Confederation, 167.

Sadrolhosseini, A.R. and Habibiasr, M. and Soleimani, H. and Hamidon, M.N. and Fen, Y.W. and Lim, H.N. (2021) Surface Plasmon Resonance Sensor to Detect n-Hexane in Palm Kernel Oil Using Polypyrrole Nanoparticles Reduced Graphene Oxide Layer. Journal of Sensors, 2021.

Siyal, A.A. and Shamsuddin, M.R. and Low, A. (2021) Fly ash based geopolymer for the adsorption of cationic and nonionic surfactants from aqueous solution â�� A feasibility study. Materials Letters, 283.

Sabet, M. and Soleimani, H. (2021) The influence of graphene on the mechanical, thermal, and flame retardant characteristics of Polyamide 6. Materials Technology.

Sattar, A. and Ahmad, M.N. and Surin, E.S.M. and Mahmood, A.K. (2021) An improved methodology for collaborative construction of reusable, localized, and shareable ontology. IEEE Access.

Son, N.T. and Jaafar, J. and Aziz, I.A. and Anh, B.N. (2021) Meta-Heuristic Algorithms for Learning Path Recommender at MOOC. IEEE Access, 9. pp. 59093-59107.

Shaik, N.B. and Mantrala, K.M. and Narayana, K.L. (2021) Prediction of corrosion properties of LENSTM deposited cobalt, chromium and molybdenum alloy using artificial neural networks. International Journal of Materials and Product Technology, 62 (1-3). pp. 152-166.

Sajjad, M. and Yusoff, M.Z. and Ahmed, M. (2021) A customized floating-point processor design for FPGA and ASIC based thermal compensation in high-precision sensing. Annals of Emerging Technologies in Computing, 5 (1). pp. 40-50.

Soomro, I.A. and Pedapati, S.R. and Awang, M. (2021) Optimization of postweld tempering pulse parameters for maximum load bearing and failure energy absorption in dual phase (DP590) steel resistance spot welds. Materials Science and Engineering A, 803.

Sajjad, M. and Yusoff, M.Z. and Yahya, N. and Haider, A.S. (2021) An Efficient VLSI Architecture for FastICA by Using the Algebraic Jacobi Method for EVD. IEEE Access, 9. pp. 58287-58305.

Sajid, Z. and Karuppanan, S. and Sallih, N. and Kee, K.E. and Shah, S.Z.H. (2021) Role of washer size in mitigating adverse effects of bolt-hole clearance in a single-lap, single-bolt basalt composite joint. Composite Structures, 266.

Sumit, S.S. and Rambli, D.R.A. and Mirjalili, S. (2021) Vision-Based Human Detection Techniques: A Descriptive Review. IEEE Access.

Said, M.A. and Dalha, I.B. and Abdul Karim, Z.A. and El-Adawy, M. (2021) Influence of biogas mixing parameters on the combustion and emission characteristics of diesel RCCI engine. Alexandria Engineering Journal.

Sangu, S.S. and Illias, N.M. and Ong, C.C. and Gopinath, S.C.B. and Saheed, M.S.M. (2021) MXene-Based Aptasensor: Characterization and High-Performance Voltammetry Detection of Deoxynivalenol. BioNanoScience, 11 (2). pp. 314-323.

Soomro, I.A. and Pedapati, S.R. and Awang, M. (2021) Influence of in situ postweld heat treatment on microstructure and failure behavior of dual-phase steel resistance spot weld. International Journal of Advanced Manufacturing Technology, 114 (11-12). pp. 3739-3750.

Sharafaddin, O. and Ismail, M.I. and Halafawi, M. and Sirajuddin, M.S. and Naji, G.M.A. (2021) Simulation Investigation on Multiphase Kick Behavior and Kick Tolerance for Highly Deviated Fractured Basement Reservoirs. Petroleum and Coal, 63 (3). pp. 674-684.

Soto, G.J. and Kunasegar, R.S. and Bing, S.B. and Rahman, S.S. and Meng, C.C. (2021) An overview of workflows for developing Geological Virtual Field Trips, limitations, and future implications: A case study from Peninsular Malaysia. Petroleum and Coal, 63 (3). pp. 880-886.

Shaik, N.B. and Pedapati, S.R. and B A Dzubir, F.A. (2021) Remaining useful life prediction of a piping system using artificial neural networks: A case study. Ain Shams Engineering Journal.

Samavati, Z. and Samavati, A. and Fauzi Ismail, A. and Yahya, N. and Rahman, M.A. and Hafiz Dzarfan Othman, M. (2021) Role of outer layer configuration on saline concentration sensitivity of optical fiber probe coated with ZnO/Ag nano-heterostructure. Optics and Laser Technology, 136.

Solikin, M. and Falah, M.F. and Sunarjono, S. and Hidayati, N. and Trinugroho, S. and Sutanto, M.H. and Asnan, M.N. (2021) Bending Performance of Half-Slab Styrofoam Mortar with Glazed Nylon Fiber. Civil and Environmental Engineering, 17 (1). pp. 50-57.

Sattar, A. and Ahmad, M.N. and Surin, E.S.M. and Mahmood, A.K. (2021) An Improved Methodology for Collaborative Construction of Reusable, Localized, and Shareable Ontology. IEEE Access, 9. pp. 17463-17484.

Sumit, S.S. and Rambli, D.R.A. and Mirjalili, S. (2021) Vision-Based Human Detection Techniques: A Descriptive Review. IEEE Access, 9. pp. 42724-42761.

Stonier, A.A. and Chinnaraj, G. and Kannan, R. and Mani, G. (2021) Investigation and validation of an eleven level symmetric modular multilevel inverter using grey wolf optimization and differential evolution control algorithm for solar PV applications. Circuit World, 47 (1). pp. 117-127.

Shafian, S.R.M. and Saaid, I.M. and Razali, N. and Salleh, I.K. and Irawan, S. (2021) Experimental investigation of colloidal silica nanoparticles (C-SNPs) for fines migration control application. Applied Nanoscience (Switzerland), 11 (7). pp. 1993-2008.

Saand, A. and Ali, K. and Kumar, A. and Bheel, N. and Keerio, M.A. (2021) Effect of metakaolin developed from natural material Soorh on fresh and hardened properties of self-compacting concrete. Innovative Infrastructure Solutions, 6 (3).

Samavati, A. and Velashjerdi, M. and Ismail, A.F. and Othman, M.H.D. and Eisaabadi B., G. and Awang, A. and Samavati, Z. and Rostami, A. and Yahya, N. (2021) Continuous monitoring of crude oil movement in an electromagnetic-assisted enhanced oil recovery process using a modified fiber Bragg grating sensor. Sensors and Actuators, A: Physical, 318.

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ahmad, F. and Sajid, Z. and Gerard, P. and Sharp, K. (2021) Performance comparison of resin-infused thermoplastic and thermoset 3D fabric composites under impact loading. International Journal of Mechanical Sciences, 189.

Samavati, A. and Awang, A. and Samavati, Z. and Fauzi Ismail, A. and Othman, M.H.D. and Velashjerdi, M. and Eisaabadi B., G. and Rostami, A. (2021) Influence of ZnO nanostructure configuration on tailoring the optical bandgap: Theory and experiment. Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 263.

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ud Din, I. and Othman, A.R. and Sharp, K. and Gerard, P. (2021) Compression and buckling after impact response of resin-infused thermoplastic and thermoset 3D woven composites. Composites Part B: Engineering, 207.

Saeidi, T. and Ismail, I. and Noghanian, S. and Alhawari, A.R.H. and Abbasi, Q.H. and Imran, M.A. and Zeain, M.Y. and Ali, S.M. (2021) High gain triple-band metamaterial-based antipodal vivaldi mimo antenna for 5g communications. Micromachines, 12 (3). pp. 1-25.

Sohail, A. and Dominic, D.D. and Hijji, M. and Butt, M.A. (2021) Competency driven resource evaluation method for business process intelligence. Computers, Materials and Continua, 69 (1). pp. 1141-1157.

Shah, S.M.H. and Mustaffa, Z. and Khahro, S.H. and Yusof, K.W. and Al-Qadami, E.H.H. and Ghani, A.A. and Teo, F.Y. (2021) FROUDE NUMBER VARIANCE WITH RESPECT TO THE HYDRODYNAMIC RESPONSE OF A NON-STATIC VEHICLE ON A LOW-LYING FLOODED ROADWAY. IIUM Engineering Journal, 22 (1). pp. 35-46.

Shaik, N.B. and Mantrala, K.M. and Bakthavatchalam, B. and Gillani, Q.F. and Rehman, M.F. and Behera, A. and Rajak, D.K. and Pruncu, C.I. (2021) Corrosion Behavior of LENS Deposited CoCrMo Alloy Using Bayesian Regularization-Based Artificial Neural Network (BRANN). Journal of Bio- and Tribo-Corrosion, 7 (3).

Shafiullah, G.M. and Masola, T. and Samu, R. and Elavarasan, R.M. and Begum, S. and Subramaniam, U. and Romlie, M.F. and Chowdhury, M. and Arif, M.T. (2021) Prospects of Hybrid Renewable Energy-Based Power System: A Case Study, Post Analysis of Chipendeke Micro-Hydro, Zimbabwe. IEEE Access, 9. pp. 73433-73452.

Sheikh, N.A. and Ching, D.L.C. and Abdeljawad, T. and Khan, I. and Jamil, M. and Nisar, K.S. (2021) A fractal-fractional model for the mhd flow of casson fluid in a channel. Computers, Materials and Continua, 67 (2). pp. 1385-1398.

Shamim Kaiser, M. and Mahmud, M. and Noor, M.B.T. and Zenia, N.Z. and Mamun, S.A. and Abir Mahmud, K.M. and Azad, S. and Manjunath Aradhya, V.N. and Stephan, P. and Stephan, T. and Kannan, R. and Hanif, M. and Sharmeen, T. and Chen, T. and Hussain, A. (2021) IWorksafe: Towards Healthy Workplaces during COVID-19 with an Intelligent Phealth App for Industrial Settings. IEEE Access, 9. pp. 13814-13828.

Saeed, A.A.H. and Harun, N.Y. and Nasef, M.M. and Afolabi, H.K. and Ghaleb, A.A.S. (2021) Removal of cadmium from aqueous solution by optimized magnetic biochar using response surface methodology. Lecture Notes in Civil Engineering, 132. pp. 119-126.

Shafiq, N. and Ammar, M.A. (2021) An experimental assessment on the performance of fly ash in concrete. Lecture Notes in Civil Engineering, 132. pp. 458-467.

Shamsul Ariffin, N.S.F.B. and Ali, M.O.A. (2021) Numerical studies on the stability of offshore wind turbine (Oc5). Lecture Notes in Civil Engineering, 132. pp. 249-257.

Sekhri, K. and Yahiaoui, D. and Harahap, I.S.H. (2021) A sensitivity parameters on inelastic response of interaction soil-pile-structure system under lateral loading. Lecture Notes in Civil Engineering, 132. pp. 1020-1026.

Syahputri, J. and Joewono, T.B. and Rizki, M. and Dharmowijoyo, D.B.E. (2021) Online shopping and travel behaviour based on information and communication technology activity. Lecture Notes in Civil Engineering, 132. pp. 807-818.

Saeed, S.M. and Sutanto, M.H. and Napiah, M. and Wong, F. and Bujang, M. (2021) Review on the effect of curing on cold recycled asphalt mixture. Lecture Notes in Civil Engineering, 132. pp. 1052-1060.

Singh, N. and Elamvazuthi, I. and Nallagownden, P. and Ramasamy, G. and Jangra, A. (2021) Assessment of microgrid communication network performance for medium-scale ieee bus systems using multi-agent system. Lecture Notes in Networks and Systems, 140. pp. 377-387.

Sofian, N.M. and Hashim, A.S. and Sarlan, A. (2021) Analysis of Multimedia Elements Criteria Using AHP Method. Lecture Notes on Data Engineering and Communications Technologies, 72. pp. 891-902.

Sulaiman, S.A. (2021) Overview of geography, socio-economy, energy and environment of the tropical countries. Green Energy and Technology. pp. 1-31.

Shamsuddin, R. and Singh, G. and Kok, H.Y. and Hakimi Rosli, M. and Dawi Cahyono, N.A. and Lam, M.K. and Lim, J.W. and Low, A. (2021) Palm Oil Industryâ��Processes, By-Product Treatment and Value Addition. Advances in Science, Technology and Innovation. pp. 121-143.

Saad, N. and Dahari, M. (2021) A Controller for Natural Gas Fuel Dispenser with Multi-Level-Pressure Banks. Studies in Systems, Decision and Control, 320. pp. 25-45.

Saqib, S. and Mukhtar, A. and Ullah, S. and Sagir, M. and Tahir, M.B. and Amen, R. and Babar, M. and Al-Sehemi, A.G. and Assiri, M.A. and Ibrahim, M. (2021) Biological Methods for Carbon Dioxide Conversion and Utilization. Advances in Science, Technology and Innovation. pp. 165-177.

Sulaiman, S.A. and Abdullah, A.H.B. and Muhammad Yusof, A.B. and Suhaimi, U.N.B. and Dharshana, R. and Nor Hamedi, A.A.B. and Liaw, K.L. (2021) Innovations to reduce air-conditioning energy consumption. Green Energy and Technology. pp. 309-326.

Subhani, N. and Kannan, R. and Mahmud, A. and Blaabjerg, F. (2021) Z-source inverter topologies with switched Z-impedance networks: A review. IET Power Electronics, 14 (4). pp. 727-750.

Sharifianjazi, F. and Esmaeilkhanian, A. and Bazli, L. and Eskandarinezhad, S. and Khaksar, S. and Shafiee, P. and Yusuf, M. and Abdullah, B. and Salahshour, P. and Sadeghi, F. (2021) A review on recent advances in dry reforming of methane over Ni- and Co-based nanocatalysts. International Journal of Hydrogen Energy.

Soleimani, H. and Ali, H. and Yahya, N. and Khodapanah, L. and Sabet, M. and Demiral, B.M.R. and Kozlowski, G. (2021) Dynamics and geometry effects on the capillary flows in porous media for enhanced oil recovery. Defect and Diffusion Forum, 413. pp. 77-83.

Sikiru, S. and Afolabi, L.O. and Omran, A.A.B. and Elfaghi, A.M. (2021) Ionic Surface Dielectric Properties Distribution on Reservoir Sandstone. International Journal of Integrated Engineering, 13 (5). pp. 258-265.

Sayed, K. and Baloo, L. and Yekeen, S.T. and Kankia, M.U. and Jagaba, A.H. (2021) Determination of total petroleum hydrocarbons concentration in coastal seawater of teluk batik beach, perak, malaysia. Key Engineering Materials, 888 KE. pp. 119-128.

Sattar, M. and Othman, A.R. and Kamaruddin, S. and Alam, M.A. and Azeem, M. (2021) Creep parameters determination by omega model to norton bailey law by regression analysis for austenitic steel ss-304. Solid State Phenomena, 324 SS. pp. 188-197.

Sarwono, A. and Septiariva, I.Y. and Qonitan, F.D. and Zahra, N.L. and Sari, M.M. and Fauziah, E.N. and Sari, N.K. and Ummatin, K.K. and Arifianti, Q.A.M.O. and Faria, N. and Lim, J.W. and Suryawan, I.W.K. (2021) Refuse Derived Fuel for Energy Recovery by Thermal Processes. A Case Study in Depok City, Indonesia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 88 (1). pp. 12-23.

Saha, B.B. and Haruki, M. and Habib, K. (2021) Selected papers from the 5th international symposium on innovative materials for processes in energy systems (IMPRES2019). Heat Transfer Engineering.

Shutari, H. and Saad, N. and Nor, N.B.M. and Tajuddin, M.F.N. and Alqushaibi, A. and Magzoub, M.A. (2021) Towards Enhancing the Performance of Grid-Tied VSWT via Adopting Sine Cosine Algorithm-Based Optimal Control Scheme. IEEE Access, 9. pp. 139074-139088.

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ahmad, F. and Sajid, Z. (2021) Mechanical Properties and Failure Mechanisms of Novel Resin-infused Thermoplastic and Conventional Thermoset 3D Fabric Composites. Applied Composite Materials.

Son, N.T. and Jaafar, J. and Aziz, I.A. and Anh, B.N. and Binh, H.D. and Aftab, M.U. (2021) A Compromise Programming to Task Assignment Problem in Software Development Project. Computers, Materials and Continua, 69 (3). pp. 3429-3444.

Sayani, J.K.S. and Lal, B. and Pedapati, S.R. (2021) Comprehensive Review on Various Gas Hydrate Modelling Techniques: Prospects and Challenges. Archives of Computational Methods in Engineering.

Sultana, S. and Hussain, S.S. and Hashmani, M. and Ahmad, J. and Zubair, M. (2021) A deep learning hybrid ensemble fusion for chest radiograph classification. Neural Network World, 31 (3). pp. 199-209.

Saad, S. and Alaloul, W.S. and Ammad, S. and Qureshi, A.H. (2021) A qualitative conceptual framework to tackle skill shortages in offsite construction industry: aÂ scientometric approach. Engineering, Construction and Architectural Management.

Sharif, Z. and Jung, L.T. and Razzak, I. and Alazab, M. (2021) Adaptive and Priority-based Resource Allocation for Efficient Resources Utilization in Mobile Edge Computing. IEEE Internet of Things Journal.

Saikat, S. and Dhillon, J.S. and Ahmad, W.F.W. and Jamaluddin, R.A. (2021) A systematic review of the benefits and challenges of mobile learning during the covid-19 pandemic. Education Sciences, 11 (9).

Sohail, A. and Haseeb, A. and Rehman, M. and Dominic, D.D. and Butt, M.A. (2021) An intelligent graph edit distance-based approach for finding business process similarities. Computers, Materials and Continua, 69 (3). pp. 3603-3618.

Shubham, S. and Jain, N. and Gupta, V. and Mohan, S. and Ariffin, M.M. and Ahmadian, A. (2021) Identify glomeruli in human kidney tissue images using a deep learning approach. Soft Computing.

Shamim, A. and Siddique, J. and Noor, U. and Hassan, R. (2021) Co-creative service design for online businesses in post-COVID-19. Journal of Islamic Marketing.

Shahbaz, M. and AlNouss, A. and Yusup, S. and Mckay, G. and Ansari, T.-A. (2021) Techno-economic evaluation of sorption enhanced steam gasification of PKS system for syngas using CaO for CO2 capture. Computer Aided Chemical Engineering, 50. pp. 129-134.

Shaikh, F.B. and Rehman, M. and Amin, A. and Shamim, A. and Hashmani, M.A. (2021) Cyberbullying Behaviour: A Study of Undergraduate University Students. IEEE Access, 9. pp. 92715-92734.

Suresh, K. and Jeoti, V. and Drieberg, M. and Soeung, S. and Iqbal, A. and Stojanovic, G.M. and Sarang, S. (2021) Simultaneous Detection of Multiple Surface Acoustic Wave Sensor-Tags for Water Quality Monitoring utilizing Cellular Code-Reuse Approach. IEEE Internet of Things Journal.

Shafie, S.N.A. and Md Nordin, N.A.H. and Bilad, M.R. and Misdan, N. and Sazali, N. and Putra, Z.A. and Wirzal, M.D.H. and Idris, A. and Jaafar, J. and Man, Z. (2021) emimtf2n-modified silica as filler in mixed matrix membrane for carbon dioxide separation. Membranes, 11 (5).

Shozib, I.A. and Ahmad, A. and Rahaman, M.S.A. and Abdul-Rani, A.M. and Alam, M.A. and Beheshti, M. and Taufiqurrahman, I. (2021) Modelling and optimization of microhardness of electroless Ni-P-TiO2composite coating based on machine learning approaches and RSM. Journal of Materials Research and Technology, 12. pp. 1010-1025.

Shah, M.M. and Afridi, S. and Khan, E.U. and Rahim, H.U. and Mustafa, M.R. (2021) Diagenetic Modifications and Reservoir Heterogeneity Associated with Magmatic Intrusions in the Devonian Khyber Limestone, Peshawar Basin, NW Pakistan. Geofluids, 2021.

Sabet, M. and Soleimani, H. (2021) The influence of graphene on the mechanical, thermal, and flame retardant characteristics of Polyamide 6. Materials Technology.

Sikiru, S. (2021) Ionic transport and influence of electromagnetic field interaction within electric double layer in reservoir sandstone. Journal of Molecular Liquids, 344.

Suryawan, I.W.K. and Rahman, A. and Lim, J.-W. and Helmy, Q. (2021) Environmental impact of municipal wastewater management based on analysis of life cycle assessment in Denpasar City. Desalination and Water Treatment, 244. pp. 55-62.

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Choudhry, R.S. and Sajid, Z. and Din, I.U. (2021) Experimental investigation on the quasi-static crush performance of resin-infused thermoplastic 3D fibre-reinforced composites. Composites Communications, 28.

Suresh, S.D. and Qasim, A. and Lal, B. and Imran, S.M. and Foo, K.S. (2021) Application of Gaussian Process Regression (GPR) in Gas Hydrate Mitigation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 88 (2). pp. 27-37.

Sanzad Lumen, S.M. and Kannan, R. and Yahaya, N.Z. (2021) A new direct current circuit breaker with current regeneration capability. International Journal of Power Electronics and Drive Systems, 12 (4). pp. 2322-2335.

Subramani, I.G. and Perumal, V. and Gopinath, S.C.B. and Mohamed, N.M. and Ovinis, M. and Sze, L.L. (2021) 1,1'-Carbonyldiimidazole-copper nanoflower enhanced collapsible laser scribed graphene engraved microgap capacitive aptasensor for the detection of milk allergen. Scientific Reports, 11 (1).

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Sajid, Z. (2021) Multiscale damage modelling of 3D woven composites under static and impact loads. Composites Part A: Applied Science and Manufacturing, 151.

Sheikh, N.A. and Ching, D.L.C. and Khan, I. and Sakidin, H. (2021) Intensification in heat transfer due to hybrid nanoparticles embedded in sodium alginate. Case Studies in Thermal Engineering, 28.

Sheikh, N.A. and Ching, D.L.C. and Khan, I. and Sakidin, H.B. and Jamil, M. and Khalid, H.U. and Ahmed, N. (2021) Fractional model for MHD flow of Casson fluid with cadmium telluride nanoparticles using the generalized Fourierâ��s law. Scientific Reports, 11 (1).

Salehuddin, N.F. and Mansor, N. and Yahya, W.Z.N. and Noor Affendi, N.M. and Manogaran, M.D. (2021) Organosulfur Compounds as Soil Urease Inhibitors and Their Effect on Kinetics of Urea Hydrolysis. Journal of Soil Science and Plant Nutrition, 21 (4). pp. 2652-2659.

Sambudi, Nonni Soraya (2021) Electrospun polylactic acid/tungsten oxide/amino-functionalized carbon quantum dots (PLA/WO3/N-CQDs) fibers for oil/water separation and photocatalytic decolorization. Electrospun polylactic acid/tungsten oxide/amino-functionalized carbon quantum dots (PLA/WO3/N-CQDs) fibers for oil/water separation and photocatalytic decolorization, 9 (5). ISSN 2213-3437

Sultan, T. and Zabiri, H. and Shahbaz, M. and Maulud, A.S. (2021) Model Analysis for the Implementation of a Fast Model Predictive Control Scheme on the Absorption/Stripping CO2Capture Plants. ACS Omega.

Sidek, A. and Omar, A.F. and Supee, A. and Alpandi, A.H. and Husin, H. and Ekaputra, D.B. and Omar, S. (2021) Oily sand cleaning optimization by surfactants interfacial tension screening and hydrocyclone separation Pengoptimuman pembersihan pasir berminyak oleh saringan ketegangan antara muka surfaktan dan pemisahan hidrosiklon. Malaysian Journal of Analytical Sciences, 25 (2). pp. 203-214.

Sayed, K. and Baloo, L. and Kutty, S.R.B.M. and Makba, F. (2021) Potential biodegradation of Tapis Light Crude Petroleum Oil, using palm oil mill effluent final discharge as biostimulant for isolated halotolerant Bacillus strains. Marine Pollution Bulletin, 172.

Sajjad, Muhammad and Yusoff, Mohd Zuki and Ahmed, Muhammad (2021) A customized floating-point processor design for FPGA and ASIC based thermal compensation in high-precision sensing. Annals of Emerging Technologies in Computing (AETiC), 5 (1). pp. 40-50.

Shozib, Imtiaz Ahmed and Ahmad, Azlan and Rahaman, Md Shokor A and majdi Abdul-Rani, Ahmad and Alam, Mohammad Azad and Beheshti, Mohammadali and Taufiqurrahman, Iqbal (2021) Modelling and optimization of microhardness of electroless Ni--P--TiO2 composite coating based on machine learning approaches and RSM. Journal of Materials Research and Technology, 12. pp. 1010-1025.

Sheikh, Nadeem Ahmad and Ching, Dennis Ling Chuan and Khan, Ilyas and Sakidin, Hamzah (2021) Intensification in heat transfer due to hybrid nanoparticles embedded in sodium alginate. Case Studies in Thermal Engineering, 28. p. 101440.

Sheikh, Nadeem Ahmad and Ching, Dennis Ling Chuan and Khan, Ilyas and Sakidin, Hamzah Bin and Jamil, Muhammad and Khalid, Hafiz Usman and Ahmed, Nisar (2021) Fractional model for MHD flow of Casson fluid with cadmium telluride nanoparticles using the generalized Fourierâ��s law. Scientific reports, 11 (1). p. 16117.

T

Triawan, Farid and Rachmawati, Elin and Budiman, Bentang Arief and Djamari, Djati Wibowo and Saputro, Andy and Arpi, Ilman (2021) Investigation of Compressive Behavior of Pre-folded Thin-walled Column Fabricated by 3D Printing. Indonesian Journal of Science and Technology, 6 (3). pp. 543-560.

Ting, Chue Cui and Laziz, Afiq Mohd and Bui, Khoa Dang Dang and Nguyen, Ngoc Thi Nhu and Bui, Pha Ngoc and Dang, Khoa Ta and Nguyen, An Si Xuan and Hoang, Ngon Trung and Shaari, Ku Zilati Ku and Pháº¡m, Hoàng Huy PhÆ°á»�c Lá»£i (2021) Hydrodynamic studies on liquid-liquid two phase flow separation in microchannel by computational fluid dynamic modelling. VNUHCM Journal of Engineering and Technology, 4 (2). pp. 920-931.

Tamidi, AM and Lau, KK and Khalit, SH (2021) A review of recent development in numerical simulation of ultrasonic-assisted gas-liquid mass transfer process. Computers & Chemical Engineering, 155. p. 107498.

Taqvi, Syed Ali Ammar and Zabiri, Haslinda and Tufa, Lemma Dendena and Uddin, Fahim and Fatima, Syeda Anmol and Maulud, Abdulhalim Shah (2021) A review on data-driven learning approaches for fault detection and diagnosis in chemical processes. ChemBioEng Reviews, 8 (3). pp. 239-259.

Tobi, A.R. and Dennis, J.O. and Zaid, H.M. (2021) Evaluation of low-cost high performance solid-state supercapacitor derived from physically and chemically activated oil palm fiber. Materials Letters, 285.

Tang, T.B. and Chong, J.S. and Kiguchi, M. and Funane, T. and Lu, C.-K. (2021) Detection of Emotional Sensitivity Using fNIRS Based Dynamic Functional Connectivity. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 29. pp. 894-904.

Tung, S.N. and Jaafar, J.B. and Aziz, I.A. and Nguyen, H.G. and Bui, A.N. (2021) Genetic Algorithm for Solving Multi-Objective Optimization in Examination Timetabling Problem. International Journal of Emerging Technologies in Learning, 16 (11). pp. 4-24.

Tian, S. and Arshad, N.I. and Toghraie, D. and Eftekhari, S.A. and Hekmatifar, M. (2021) Using perceptron feed-forward Artificial Neural Network (ANN) for predicting the thermal conductivity of graphene oxide-Al2O3/water-ethylene glycol hybrid nanofluid. Case Studies in Thermal Engineering, 26.

Tariq, A. and Altaf, K. and Ahmad, S.W. and Hussain, G. and Ratlamwala, T.A.H. (2021) Comparative numerical and experimental analysis of thermal and hydraulic performance of improved plate fin heat sinks. Applied Thermal Engineering, 182.

Teh, C.J.Q. and Drieberg, M. and Soeung, S. and Ahmad, R. (2021) Simple PV Modeling under Variable Operating Conditions. IEEE Access, 9. pp. 96546-96558.

Tudu, S. and Mondal, S.P. and Ahmadian, A. and Mahmood, A.K. and Salahshour, S. and Ferrara, M. (2021) Solution of generalised type â�� 2 Fuzzy boundary value problem. Alexandria Engineering Journal, 60 (2). pp. 2725-2739.

Thaha, M.A. and Dwipuspita, A.I. and Dharmowijoyo, D.B.E. (2021) S-curve rubble mound breakwater. Lecture Notes in Civil Engineering, 132. pp. 928-935.

Tjaronge, M.W. and Musarat, M.A. and Law, K. and Alaloul, W.S. and Ayub, S. (2021) Effect of graphene oxide on mechanical properties of rubberized concrete: A review. Lecture Notes in Civil Engineering, 132. pp. 484-492.

Takaijudin, H. and Osman, M. and Yusof, K.W. and Ghani, A.A. and Weng, G.H. (2021) The effectiveness of cascaded bioretention system in treating urban stormwater runoff. Lecture Notes in Civil Engineering, 132. pp. 39-46.

Tan, I.T.S. and Nik Hassan, N.M.K. and Min, T.H. (2021) Impact of coastal development on hydrodynamic change of the mangrove coastline in tanjung piai, malaysia. Lecture Notes in Civil Engineering, 132. pp. 213-220.

Thinakaran, V. and Othman, I. (2021) Factors of safety misconduct affecting safety performance of tall building construction site. Lecture Notes in Civil Engineering, 132. pp. 620-630.

Tran, D.C. and Ibrahim, R. and Hussin, F.A. and Omar, M. (2021) Energy-efficient superframe scheduling in industrial wireless networked control system. Lecture Notes in Electrical Engineering, 666. pp. 1227-1242.

Tyagi, S. and Uppal, A. and Kumar, R. and Sharma, S. (2021) Disease Detection and Quality Analysis of Fruits and Vegetables. Lecture Notes in Mechanical Engineering. pp. 591-599.

Teh, H.M. and Silavaraj, T. and Ul Hassan, S.S. and Pereira, E.J. (2021) Investigation on motion responses of a floating wave barrier in a wave flume subjected to regular wave action. Lecture Notes in Civil Engineering, 132. pp. 281-288.

Thangarasu, G. and Dominic, P.D.D. and Subramanian, K. (2021) An Architecture for Intelligent Diagnosing Diabetic Types and Complications Based on Symptoms. Lecture Notes on Data Engineering and Communications Technologies, 72. pp. 102-110.

Tariq, A. and Altaf, K. and Hussain, G. and Reezwan, M. (2021) Plate fin heat sink for the application in solar thermal power. Green Energy and Technology. pp. 115-131.

Taqvi, S.A.A. and Zabiri, H. and Tufa, L.D. and Uddin, F. and Fatima, S.A. and Maulud, A.S. (2021) A Review on Data-Driven Learning Approaches for Fault Detection and Diagnosis in Chemical Processes. ChemBioEng Reviews, 8 (3). pp. 239-259.

Tabaaza, G.A. and Haq, I.U. and Zain, D.B. and Lal, B. (2021) Toxicological issues of conventional gas hydrate inhibitors. Process Safety Progress.

Tella, A. and Balogun, A.-L. (2021) GIS-based air quality modelling: spatial prediction of PM10 for Selangor State, Malaysia using machine learning algorithms. Environmental Science and Pollution Research.

Teh, C.J.Q. and Drieberg, M. and Soeung, S. and Ahmad, R. (2021) Simple PV Modeling under Variable Operating Conditions. IEEE Access, 9. pp. 96546-96558.

Tyagi, S. and Uppal, A. and Kumar, R. and Sharma, S. (2021) Disease Detection and Quality Analysis of Fruits and Vegetables. Lecture Notes in Mechanical Engineering. pp. 591-599.

Toha, M.A. and Johl, S.K. (2021) Panel dataset to assess proactive eco-innovation in the paradigm of firm financial progression. Data, 6 (12).

Tiong, J.S.M. and Chan, Y.J. and Lim, J.W. and Mohamad, M. and Ho, C.-D. and Ur Rahmah, A. and Kiatkittipong, W. and Sriseubsai, W. and Kumakiri, I. (2021) Simulation and optimization of anaerobic co-digestion of food waste with palm oil mill effluent for biogas production. Sustainability (Switzerland), 13 (24).

Tong, K.T.X. and Tan, I.S. and Foo, H.C.Y. and Tiong, A.C.Y. and Lam, M.K. and Lee, K.T. (2021) Third-generation L-Lactic acid production by the microwave-assisted hydrolysis of red macroalgae Eucheuma denticulatum extract. Bioresource Technology, 342.

Tamidi, A.M. and Lau, K.K. and Khalit, S.H. (2021) A review of recent development in numerical simulation of ultrasonic-assisted gas-liquid mass transfer process. Computers and Chemical Engineering, 155.

Tran, T.T.V. and Kumar, S.R. and Nguyen, C.H. and Lee, J.W. and Tsai, H.-A. and Hsieh, C.-H. and Lue, S.J. (2021) High-permeability graphene oxide and poly(vinyl pyrrolidone) blended poly(vinylidene fluoride) membranes: Roles of additives and their cumulative effects. Journal of Membrane Science, 619.

Thuy, D.T.B. and Nguyen, A. and Khoo, K.S. and Chew, K.W. and Cnockaert, M. and Vandamme, P. and Ho, Y.-C. and Huy, N.D. and Cocoletzi, H.H. and Show, P.L. (2021) Optimization of culture conditions for gamma-aminobutyric acid production by newly identified Pediococcus pentosaceus MN12 isolated from â��mam nemâ��, a fermented fish sauce. Bioengineered, 12 (1). pp. 54-62.

Tackie-Otoo, B.N. and Atta, D.Y. and Ayoub Mohammed, M.A. and Otchere, D.A. (2021) Investigation into the Oil Recovery Process Using an Organic Alkali-Amino Acid-Based Surfactant System. Energy and Fuels, 35 (14). pp. 11171-11192.

Tang, Tong Boon and Chong, Jie Sheng and Kiguchi, Masashi and Funane, Tsukasa and Lu, Cheng-Kai (2021) Detection of emotional sensitivity using fnirs based dynamic functional connectivity. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 29. pp. 894-904.

U

Uddin, Shihab and Islam, Md Rafiqul and Chowdhury, Md Raihan and Wakabayashi, Rie and Kamiya, Noriho and Moniruzzaman, Muhammad and Goto, Masahiro (2021) Lipid-based ionic-liquid-mediated nanodispersions as biocompatible carriers for the enhanced transdermal delivery of a peptide drug. ACS applied bio materials, 4 (8). pp. 6256-6267.

Usmani, U.A. and Watada, J. and Jaafar, J. and Aziz, I.A. and Roy, A. (2021) A Reinforced Active Learning Algorithm for Semantic Segmentation in Complex Imaging. IEEE Access, 9. pp. 168415-168432.

Umrani, Z.A. and Khatani, M. and Uqaili, M.A. and Mohamed, N.M. and Hamid, N.H. and Chowdhary, B.S. (2021) Dye sensitised solar power generating window: Towards environmentally sustainable energy efficiency in ICT. International Journal of Computer Aided Engineering and Technology, 14 (2). pp. 255-277.

Usman Kankia, M. and Baloo, L. and Mohammed, B.S. and Hassan, S.B. and Haruna, S. and Danlami, N. and Affiana Ishak, E. and Nurliyana Samahani, W. (2021) Effects of petroleum sludge ash in fly ash-based geopolymer mortar. Construction and Building Materials, 272.

Umar, U.A. and Shafiq, N. and Ahmad, F.A. (2021) A case study on the effective implementation of the reuse and recycling of construction & demolition waste management practices in Malaysia. Ain Shams Engineering Journal, 12 (1). pp. 283-291.

Ullah, Z. and Qureshi, M.I. and Ahmad, A. and Khan, S.U. and Javaid, M.F. (2021) An experimental study on the mechanical and durability properties assessment of E-waste concrete. Journal of Building Engineering, 38.

Umar, A.A. and Zawawi, N.A.W.A. and Abdul-Aziz, A.-R. (2021) Malaysian regulators' ranking of PPP contract governance skills. Built Environment Project and Asset Management, 11 (1). pp. 88-102.

Usman, A. and Sutanto, M.H. and Napiah, M. and Zoorob, S.E. and Abdulrahman, S. and Saeed, S.M. (2021) Irradiated polyethylene terephthalate fiber and binder contents optimization for fiber-reinforced asphalt mix using response surface methodology. Ain Shams Engineering Journal, 12 (1). pp. 271-282.

Ullah, Z. and Nawi, I. and Witjaksono, G. and Tansu, N. and Khattak, M.I. and Junaid, M. and Usman, F. (2021) Electrically enhanced graphene-metal plasmonic antenna for infrared sensing. Optik, 241.

Ullah, S. and Daud, H. and Zainuddin, N. and Dass, S.C. and Khalil, A. and Fanaee, H.T. and Khan, I. (2021) Space-time cluster analysis of accidental oil spills in Rivers State, Nigeria, 2011â��2019. Computers, Materials and Continua, 66 (3). pp. 3065-3074.

Ul Mustafa, M.R. and Haneef, T. and Jian, B.T.P. and Yusof, K.W. and Khurshid, H. (2021) Optimization study of n-zvi oxidation for organic pollutants removal from wastewater. Lecture Notes in Civil Engineering, 132. pp. 30-38.

Utomo, C. and Rahmawati, Y. and Sari, O.L. (2021) Methodology review on multi stakeholders decision of urban market land use. Lecture Notes in Civil Engineering, 132. pp. 685-692.

Umar, H.A. and Sulaiman, S.A. and Said, M.A. and Gungor, A. and Ahmad, R.K. (2021) An overview of biomass conversion technologies in nigeria. Green Energy and Technology. pp. 133-150.

Usmani, U.A. and Watada, J. and Jaafar, J. and Aziz, I.A. and Roy, A. (2021) A Reinforcement Learning Based Adaptive ROI Generation for Video Object Segmentation. IEEE Access, 9. pp. 161959-161977.

Ullah, S. and Shamraiz, U. and Elizbit and Badshah, A. and Raza, B. and Farooqi, A.S. and Tofil, H.M. and Zeb, M.A. and Alfantazi, A. (2021) Sulfur enriched cobalt-based layered double hydroxides for oxygen evolution reactions. International Journal of Hydrogen Energy.

Ullah, S. and Nor, N.H.M. and Daud, H. and Zainuddin, N. and Hadi Fanaee, T. and Khalil, A. (2021) An eigenspace method for detecting space-time disease clusters with unknown population-data. Computers, Materials and Continua, 70 (1). pp. 1945-1953.

Umar, H.A. and Sulaiman, S.A. and Majid, M.A.B.A. and Said, M.A. and Gungor, A. and Ahmad, R.K. (2021) An Outlook on Tar Abatement, Carbon Capture and its Utilization for a Clean Gasification Process. Evergreen, 8 (4). pp. 717-731.

Usmani, U.A. and Watada, J. and Jaafar, J. and Aziz, I.A. and Roy, A. (2021) Particle swarm optimization with deep learning for human action recognition. International Journal of Innovative Computing, Information and Control, 17 (6). pp. 1843-1870.

Ullah, H. and Qureshi, K.S. and Khan, U. and Zaffar, M. and Yang, Y.J. and Rabat, N.E. and Khan, M.I. and Saqib, S. and Mukhtar, A. and Ullah, S. and Mubashir, M. and Bokhari, A. and Chai, W.S. and Chew, K.W. and Show, P.L. (2021) Self-healing epoxy coating synthesis by embedment of metal 2-methyl imidazole and acetylacetonate complexes with microcapsules. Chemosphere, 285.

V

Vijaya Bhaskar Reddy, Ambavaram and Moniruzzaman, Muhammad and Madhavi, Gajulapalle (2021) Removal of Heavy Metal Pollutants from Wastewater Using Zerovalent Iron Nanoparticles. Water Pollution and Remediation: Heavy Metals. pp. 37-72.

Vijaya Bhaskar Reddy, A. and Madhavi, V. and Ahmad, A. and Madhavi, G. (2021) Heavy metals removal using carbon based nanocomposites: Heavy metals adsorption by cbns. Green Energy and Technology. pp. 249-274.

W

Wongso, Viona and Sambudi, Nonni Soraya and Sufian, Suriati (2021) The effect of hydrothermal conditions on photoluminescence properties of rice husk-derived silica-carbon quantum dots for methylene blue degradation. Biomass Conversion and Biorefinery, 11. pp. 2641-2654.

Waqas, S. and Bilad, M.R. and Man, Z.B. (2021) Performance and energy consumption evaluation of rotating biological contactor for domestic wastewater treatment. Indonesian Journal of Science and Technology, 6 (1). pp. 101-112.

Wahaab, F.A. and Yahya, W. and Adebayo, L.L. and Kazeem, I. and Abdulraheem, A. and Alqasem, B. and Yusuf, J.Y. and Adekoya, A.A. and Mui Nyuk, C. (2021) Graphene@Ni0.5Co0.5Fe2O4 hybrid framework with enhanced interfacial polarization for electromagnetic wave absorption. Journal of Alloys and Compounds, 854.

Waqas, S. and Bilad, M.R. and Man, Z.B. and Suleman, H. and Hadi Nordin, N.A. and Jaafar, J. and Dzarfan Othman, M.H. and Elma, M. (2021) An energy-efficient membrane rotating biological contactor for wastewater treatment. Journal of Cleaner Production, 282.

Wang, Y. and Sun, X. and Gopinath, S.C.B. and Saheed, M.S.M. and Wang, X. (2021) Thyroglobulin determination on silaneâ��antibody functionalized interdigitated dielectrode surface to diagnose thyroid tumor. Biotechnology and Applied Biochemistry.

Wirzal, M.D.H. and Sathishkumar, P. and Alshahrani, L.A. and Yusoff, A.R.M. and Gu, F.L. and Qureshi, M.S. and Khalid, M. and Khokhar, F.M. (2021) Nifedipine degradation by an electro-oxidation process using titanium-based RuO2â��IrO2â��TiO2 mixed metal oxide electrode. Chemical Papers, 75 (2). pp. 681-690.

Wahab, M.M.A. and Anwar, N.A. and Mohammed, B. and Rahman, A.R.A. and Razak, Z. (2021) Response of corroded offshore structural plate at topsides due to blast loading. Lecture Notes in Civil Engineering, 132. pp. 318-325.

Wan, F.M. and Amir, A.K. and Pierre, B. and Olivier, D.-D. and Clement, P. and Abdelilah, L. and Faiz, A. (2021) Sliding friction behavior of sintered NI-CR composites with solid lubricants. Key Engineering Materials, 875 KE. pp. 266-271.

Wan Bakar, W.Z. and Mohd Saaid, I. and Ahmad, M.R. and Amir, Z. and Japperi, N.S. and Ahmad Fuad, M.F.I. (2021) Improved water saturation estimation in shaly sandstone through variable cementation factor. Journal of Petroleum Exploration and Production Technology.

Witjaksono, G. and Junaid, M. and Khir, M.H. and Ullah, Z. and Tansu, N. and Saheed, M.S.B.M. and Siddiqui, M.A. and Ba-Hashwan, S.S. and Algamili, A.S. and Magsi, S.A. and Aslam, M.Z. and Nawaz, R. (2021) Effect of nitrogen doping on the optical bandgap and electrical conductivity of nitrogen-doped reduced graphene oxide. Molecules, 26 (21).

Y

Yap, Yun Kee and Oh, Pei Ching (2021) Effects of an Alternating Magnetic Field towards Dispersion of α-Fe2O3/TiO2 Magnetic Filler in PPOdm Polymer for CO2/CH4 Gas Separation. Membranes, 11 (8). p. 641.

Yasar, Abdullah and Rana, Saba and Moniruzzaman, Muhammad and Nazar, Masooma and Tabinda, Amtul Bari and Haider, Rizwan and Ahmad, Aqeel and Mukhtar, Ahmad and Qyyum, Muhammad Abdul and Ullah, Sami (2021) Quality and environmental impacts of oil production through pyrolysis of waste tyres. Environmental Technology & Innovation, 23. p. 101565.

Yuha, Yasmine Binti Md and Lal, Bhajan and Bavoh, Cornelius Borecho and Keong, Lau Kok (2021) A comparison study on the performance between Tetrametylammonium chloride and PolyvinylPyrrolidone as drilling mud additives for gas hydrates. Materials Today: Proceedings, 47. pp. 1258-1262.

Yusuf, M and Farooqi, AS and Ying, YX and Keong, LK and Alam, MA and Hellgardt, K and Abdullah, B (2021) Syngas production employing nickel on alumina-magnesia supported catalyst via dry methane reforming. Materialwissenschaft und Werkstofftechnik, 52 (10). pp. 1090-1100.

Yusuf, Mohammad and Beg, Mukarram and Ubaidullah, Mohd and Shaikh, Shoyebmohamad F and Keong, Lau Kok and Hellgardt, Klaus and Abdullah, Bawadi (2021) Kinetic studies for DRM over high-performance Ni--W/Al2O3--MgO catalyst. International Journal of Hydrogen Energy.

Yusuf, Mohammad and Farooqi, Ahmad Salam and Al-Kahtani, Abdullah A and Ubaidullah, Mohd and Alam, Mohammad Azad and Keong, Lau Kok and Hellgardt, Klaus and Abdullah, Bawadi (2021) Syngas production from greenhouse gases using Ni--W bimetallic catalyst via dry methane reforming: Effect of W addition. International Journal of Hydrogen Energy, 46 (53). pp. 27044-27061.

Yusuf, Mohammad and Farooqi, Ahmad Salam and Keong, Lau Kok and Hellgardt, Klaus and Abdullah, Bawadi (2021) Contemporary trends in composite Ni-based catalysts for CO2 reforming of methane. Chemical Engineering Science, 229. p. 116072.

YUSUF, MOHAMMAD and ABDULLAH, BAWADI (2021) Oriental Journal of Physical Sciences.

Yusuf, Mohammad and Alnarabiji, Mohamad Sahban and Abdullah, Bawadi (2021) Clean hydrogen production technologies. Advances in sustainable energy: policy, materials and devices. pp. 159-170.

Yaro, N.S.A. and Napiah, M.B. and Sutanto, M.H. and Usman, A. and Saeed, S.M. (2021) Modeling and optimization of mixing parameters using response surface methodology and characterization of palm oil clinker fine modified bitumen. Construction and Building Materials, 298.

Yew, G.-Y. and Liew, Z.-S. and Lai, S.-O. and Chew, T.-L. and Teh, H.-M. and Shafiai, S.H. and Lam, M.-K. and Lim, J.-W. and Show, P.-L. and Ho, Y.-C. (2021) Recent advancement of sustainable and renewable energy in osmotic power generation. Engineering Journal, 25 (2). pp. 193-206.

Yazid, E. and Ng, C.Y. (2021) Identification of time-varying linear and nonlinear impulse response functions using parametric Volterra model from model test data with application to a moored floating structure. Ocean Engineering, 219.

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Hainin, M.R. and Usman, A. and Rafindadi, A.D. and Abdulrahman, S. and Saeed, S.M. (2021) Utilization of Palm Oil Mill Residue as Sustainable Pavement Materials: A Review. International Journal of Integrated Engineering, 13 (3). pp. 66-78.

Yusuf, M. and Farooqi, A.S. and Keong, L.K. and Hellgardt, K. and Abdullah, B. (2021) Contemporary trends in composite Ni-based catalysts for CO2 reforming of methane. Chemical Engineering Science, 229.

Yahuza, M. and Idris, M.Y.I. and Ahmedy, I.B. and Wahab, A.W.A. and Nandy, T. and Noor, N.M. and Bala, A. (2021) Internet of Drones Security and Privacy Issues: Taxonomy and Open Challenges. IEEE Access, 9. pp. 57243-57270.

Yaqub, S. and Lal, B. and Md Jalil, A.A.-M.B. and Bharti, A. (2021) Effect of Inulin on the Formation Kinetics of Methane Hydrate. Lecture Notes in Mechanical Engineering. pp. 389-397.

Yatmar, H. and Ramli, M.I. and Pasra, M. and Gusfiadi and Dharmowijoyo, D.B.E. (2021) The impact of socio-demographic and activity-travel participation variables on mode choice preference of sub-urban commuters: A case study on the new railway operation in maros-makassar line. Lecture Notes in Civil Engineering, 132. pp. 945-955.

Yussiff, A.-S. and Carl, F. and Wan Ahmad, W.F. and Mariwah, S. and Debrah, O.E. and Yussiff, A.-L. (2021) System Design and Usability Evaluation of Ghana Music Documentation System Using the System Usability Scale. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 13051 . pp. 253-264.

Yahya, N.W. and Reddy Prasad, D.M. and Sathiyamoorthy, D. and Pendyala, R. (2021) Prospects and roadmaps for harvesting solar thermal power in tropical Brunei Darussalam. International Journal of Global Energy Issues, 43 (5-6). pp. 616-642.

Yusuf, M. and Beg, M. and Ubaidullah, M. and Shaikh, S.F. and Keong, L.K. and Hellgardt, K. and Abdullah, B. (2021) Kinetic studies for DRM over high-performance Niâ��W/Al2O3â��MgO catalyst. International Journal of Hydrogen Energy.

Yaqub, S. and Lal, B. and Md Jalil, A.A.-M.B. and Bharti, A. (2021) Effect of Inulin on the Formation Kinetics of Methane Hydrate. Lecture Notes in Mechanical Engineering. pp. 389-397.

Yusuf, M. and Farooqi, A.S. and Alam, M.A. and Keong, L.K. and Hellgardt, K. and Abdullah, B. (2021) Response surface optimization of syngas production from greenhouse gases via DRM over high performance Niâ��W catalyst. International Journal of Hydrogen Energy.

Yavari, S. and Kamyab, H. and Asadpour, R. and Yavari, S. and Sapari, N.B. and Baloo, L. and Manan, T.S.B.A. and Ashokkumar, V. and Chelliapan, S. (2021) The fate of imazapyr herbicide in the soil amended with carbon sorbents. Biomass Conversion and Biorefinery.

Yusuf, J.Y. and Soleimani, H. and Chuan, L.K. and Sanusi, Y.K. and Adebayo, L.L. (2021) Physicochemical properties and microwave absorption performance of Co3O4 and banana peel-derived porous activated carbon composite at X-band frequency. Journal of Alloys and Compounds, 888.

Yeganeh Ghotbi, M. and Javanmard, A. and Soleimani, H. (2021) Layered nanoreactor assisted to produce B-doped and P-doped 3D carbon nanostructures for supercapacitor electrodes. Journal of Energy Storage, 44.

Yar, A. and Krishnan, S.G. and Dennis, J.O. and Khalid, M. and Jose, R. (2021) Template-assisted electrodeposited cupric oxide nanotubes and hierarchical nanospikes for tailoring electrode-electrolyte interfacial charge transfer. Ceramics International, 47 (24). pp. 34732-34739.

Yaro, N.S.A. and Bin Napiah, M. and Sutanto, M.H. and Usman, A. and Saeed, S.M. (2021) Performance evaluation of waste palm oil fiber reinforced stone matrix asphalt mixtures using traditional and sequential mixing processes. Case Studies in Construction Materials, 15.

Yiin, C.L. and Yap, K.L. and Ku, A.Z.E. and Chin, B.L.F. and Lock, S.S.M. and Cheah, K.W. and Loy, A.C.M. and Chan, Y.H. (2021) Recent advances in green solvents for lignocellulosic biomass pretreatment: Potential of choline chloride (ChCl) based solvents. Bioresource Technology, 333.

Yusuf, Jemilat Yetunde and Soleimani, Hassan and Chuan, Lee Kean and Sanusi, Yekinni Kolawole and Adebayo, Lawal Lanre (2021) Physicochemical properties and microwave absorption performance of Co3O4 and banana peel-derived porous activated carbon composite at X-band frequency. Journal of Alloys and Compounds, 888. p. 161474.

Z

Zulfiqar, Muhammad and Sufian, Suriati and Mansor, Nurlidia and Rabat, Nurul Ekmi (2021) Synthesis and characterization of TiO2-based nanostructures via fluorine-free solvothermal method for enhancing visible light photocatalytic activity: Experimental and theoretical approach. Journal of Photochemistry and Photobiology A: Chemistry, 404. p. 112834.

Zulfiqar, Muhammad and Sufian, Suriati and Rabat, Nurul Ekmi and Mansor, Nurlidia (2021) Development of Photo-Fenton oxidation as green strategy for phenol degradation enhancement via DMF-controlled TiO2 nanotubes under various oxidizing agents. Journal of Environmental Chemical Engineering, 9 (1). p. 104933.

Zulfiqar, Muhammad and Sufian, Suriati and Rabat, Nurul Ekmi and Mansor, Nurlidia (2021) Enhancement of adsorption and photocatalytic activities of alkaline-based TiO2 nanotubes for experimental and theoretical investigation under FeCl3 and H2O2. Journal of Water Process Engineering, 39. p. 101715.

Zulfiqar, Muhammad and Sufian, Suriati and Bahadar, Ali and Lashari, Najeebullah and Rabat, Nurul Ekmi and Mansor, Nurlidia (2021) Surface-fluorination of TiO2 photocatalysts for remediation of water pollution: a review. Journal of Cleaner Production, 317. p. 128354.

Zahid, Imtisal and Ayoub, Muhammad and Abdullah, Bawadi B and Mukhtar, Ahmad and Saqib, Sidra and Rafiq, Sikander and Ullah, Sami and Al-Sehemi, Abdullah G and Farrukh, Sarah and Danish, Mohammed (2021) Glycerol conversion to solketal: Catalyst and reactor design, and factors affecting the yield. ChemBioEng Reviews, 8 (3). pp. 227-238.

Zahid, Imtisal and Ayoub, Muhammad and Abdullah, Bawadi Bin and Nazir, Muhammad Hamza and Kaimkhani, Mariam Ameen and Sher, Farooq (2021) Activation of nano kaolin clay for bio-glycerol conversion to a valuable fuel additive. Sustainability, 13 (5). p. 2631.

Zulfiqar, M. and Sufian, S. and Rabat, N.E. and Mansor, N. (2021) Enhancement of adsorption and photocatalytic activities of alkaline-based TiO2 nanotubes for experimental and theoretical investigation under FeCl3 and H2O2. Journal of Water Process Engineering, 39.

Zainal A., E.Z. and Ismael, M.A. and Aziz, A.R.A. and Mohammed, S.E. and Baharom, M.B. and Firmansyah and Hanif Ibrahim, M. and Sahalan, M.I. and Qawiy, A. (2021) Effect of aspect ratio on frequency and power generation of a free-piston linear generator. Applied Thermal Engineering, 192.

Zainuddin, Z. and P. Akhir, E.A. and Hasan, M.H. (2021) Predicting machine failure using recurrent neural network-gated recurrent unit (RNN-GRU) through time series data. Bulletin of Electrical Engineering and Informatics, 10 (2). pp. 870-878.

Zhai, G. and Bao, J. and Ma, Z. and Yang, Y. and Teh, H.M. (2021) A study of the wave impact loads on a fixed column-slab combined structure with a GPU-accelerated SPH method. Ships and Offshore Structures.

Zakariah, M.N.A. and Roslan, N. and Sulaiman, N. and Lee, S.C.H. and Hamzah, U. and Noh, K.A.M. and Lestari, W. (2021) Gravity analysis for subsurface characterization and depth estimation of Muda River Basin, Kedah, Peninsular Malaysia. Applied Sciences (Switzerland), 11 (14).

Zahoor, F. and Hussin, F.A. and Khanday, F.A. and Ahmad, M.R. and Nawi, I.M. and Ooi, C.Y. and Rokhani, F.Z. (2021) Carbon nanotube field effect transistor (Cntfet) and resistive random access memory (rram) based ternary combinational logic circuits. Electronics (Switzerland), 10 (1). pp. 1-20.

Zaman, S.U. and Saif-ur-Rehman and Zaman, M.K.U. and Rafiq, S. and Arshad, A. and Khurram, M.S. and Irfan, M. and Saqib, S. and Muhammad, N. and Irfan, M. and Sharif, F. and Bustam, M.A. and Jamal, M. and Khan, M.A. and Waseem, M.A. and Mukhtar, A. and Wajeeh, S. (2021) Fabrication and performance evaluation of polymeric membrane using blood compatible hydroxyapatite for artificial kidney application. Artificial Organs.

Zeshan, M.T. and Mustafa, M.R.U. and Yusof, K.W. (2021) Impact of Coir Geotextiles to Reduce Soil Erosion and Surface Runoff. Lecture Notes in Civil Engineering, 139 LN. pp. 93-100.

Zaman, N.A.B.B.N. and Osman, N.B. and Aqsha, A. (2021) Co-pyrolysis of Empty Fruit Bunches with Palm Kernel Shell, Palm Leaves and Sawdust to Produce Fine Chemicals. Lecture Notes in Mechanical Engineering. pp. 296-302.

Zakaria, N. (2021) Neuronal Unit of Thoughts (NUTs); AÂ Probabilistic Formalism for Higher-Order Cognition. Lecture Notes in Networks and Systems, 204. pp. 855-871.

Zakaria, M.S. and Ginta, T.L. and Azmi, A.I. (2021) A Coupled Eulerian Lagrangian (CEL) Model in Prediction Tool Temperature. Lecture Notes in Mechanical Engineering. pp. 1237-1244.

Zulfiqar, M. and Sufian, S. and Bahadar, A. and Lashari, N. and Rabat, N.E. and Mansor, N. (2021) Surface-fluorination of TiO2 photocatalysts for remediation of water pollution: A review. Journal of Cleaner Production, 317.

Zulqarnain and Yusoff, M.H.M. and Ayoub, M. and Hamza Nazir, M. and Zahid, I. and Ameen, M. and Abbas, W. and Shoparwe, N.F. and Abbas, N. (2021) Comprehensive Review on Biodiesel Production from Palm Oil Mill Effluent. ChemBioEng Reviews.

Zahid, I. and Ayoub, M. and Abdullah, B.B. and Mukhtar, A. and Saqib, S. and Rafiq, S. and Ullah, S. and Al-Sehemi, A.G. and Farrukh, S. and Danish, M. (2021) Glycerol Conversion to Solketal: Catalyst and Reactor Design, and Factors Affecting the Yield. ChemBioEng Reviews, 8 (3). pp. 227-238.

Zaman, Shafiq Uz and Zaman, Muhammad Khaliq U and Rafiq, Sikander and Arshad, Amber and Khurram, Muhammad Shahzad and Irfan, Muhammad and Saqib, Sidra and Muhammad, Nawshad and Irfan, Masooma and Sharif, Faiza and others (2021) Fabrication and performance evaluation of polymeric membrane using blood compatible hydroxyapatite for artificial kidney application. Artificial organs, 45 (11). pp. 1377-1390.

Zhai, G. and Zhou, T. and Ma, Z. and Ren, N. and Chen, J. and Teh, H.-M. (2021) Comparison of impulsive wave forces on a semi-submerged platform deck, with and without columns and considering air compressibility effects, under regular wave actions. Engineering Applications of Computational Fluid Mechanics, 15 (1). pp. 1932-1953.

Zaffar, M. and Hashmani, M.A. and Habib, R. and Quraishi, K.S. and Irfan, M. and Alqhtani, S. and Hamdi, M. (2021) A hybrid feature selection framework for predicting students performance. Computers, Materials and Continua, 70 (1). pp. 1893-1920.

Zakaria, N. (2021) Neuronal Unit of Thoughts (NUTs); AÂ Probabilistic Formalism for Higher-Order Cognition. Lecture Notes in Networks and Systems, 204. pp. 855-871.

Zakaria, M.S. and Ginta, T.L. and Azmi, A.I. (2021) A Coupled Eulerian Lagrangian (CEL) Model in Prediction Tool Temperature. Lecture Notes in Mechanical Engineering. pp. 1237-1244.

Zulfiqar, M. and Rabat, N.E. and Bahadar, A. and Lashari, N. and Mahnashi, M.H. and Alqarni, A.O. (2021) Development of Elaeis guineensis/polyvinyl alcohol/carbon nanotube composites for efficient adsorption of dye: Experimental and theoretical approach. International Journal of Environmental Science and Technology.

Zaine, S.N.A. and Mohamed, N.M. and Khatani, M. and Shahid, M.U. (2021) Enhancement of charge transport of a dye-sensitized solar cell utilizing tio2 quantum dot photoelectrode film. Coatings, 11 (12).

Zango, Z.U. and Jumbri, K. and Sambudi, N.S. and Abu Bakar, H.H. and Garba, Z.N. and Isiyaka, H.A. and Saad, B. (2021) Selective adsorption of dyes and pharmaceuticals from water by UiO metalâ��organic frameworks: A comprehensive review. Polyhedron, 210.

Zeshan, M.T. and Mustafa, M.R.U. and Baig, M.F. (2021) Article monitoring land use changes and their future prospects using gis and ann-ca for perak river basin, malaysia. Water (Switzerland), 13 (16).

Zulqarnain and Yusoff, M.H.M. and Ayoub, M. and Nazir, M.H. and Sher, F. and Zahid, I. and Ameen, M. (2021) Solvent extraction and performance analysis of residual palm oil for biodiesel production: Experimental and simulation study. Journal of Environmental Chemical Engineering, 9 (4).

Zain, Mohamad Zamri Md and Abdul-Rani, Ahmad Majdi and Al-Amin, Md and Khan, SF and Razak, Muhammad Alâ��Hapis Abdul and Sulaiman, MH and Unune, Deepak Rajendra (2021) Automotive Body in White Framing Systems Review. Jurnal Kejuruteraan, 33 (3). pp. 473-476.

This list was generated on Sat May 18 06:21:06 2024 +08.