Browse by Type

Group by: Creators | Item Type | No Grouping

Jump to: | . | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | X | Y | Z

Number of items: 283.

Ahmed Chandio, Imtiaz and Matori , Abd Nasir and WanYusof, Khamaruzaman and Hussain Talpur , Mir Aftab (2013) Validation of Multi-Criteria Decision Analysis Model of Land Suitability Analysis for Sustainable Hillside Development. European Journal of Scientific Research. ISSN 1450202X

Al-Kayiem, Hussain H. and Al-Taie, Arkan K. and Wong, Wee T. (2013) Analysis on gas turbine blade cooling by compressed air channels using CFD simulation. Asian Journal of Scientific Research , 6 (3). pp. 467-477. ISSN 19921454

Khalajiassadi, Morteza (2013) Integrated dynamic modeling for energy optimization in the building: Part 1:The development of the model. Journal of Building Physic, 37 (1). pp. 28-54.

Khalaji Assadi, Morteza (2013) Energy Demand Model of the Household Sector and Its Application in Developing Metropolitan Cities( Case Study: Tehran). Pol.J.Environ.Stud, 22 (2). pp. 319-329.

.

., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, Puteri Sri Melor (2013) Uniform dispersion of multiwalled carbon nanotubes in copper matrix nanocomposites using metal injection molding technique. Uniform dispersion of multiwalled carbon nanotubes in copper matrix nanocomposites using metal injection molding technique.

., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, M Rafi Raza (2013) Fabrication and Microstructural Analysis of CNTs Reinforced Copper Matrix Nanocomposites via MIM Technique. Fabrication and Microstructural Analysis of CNTs Reinforced Copper Matrix Nanocomposites via MIM Technique. (Submitted)

., NA Wan Abdullah Zawawi, MS Liew, KL Na, H Idrus (2013) Engineering the civil engineering education: A capstone case study in a Malaysian university. Engineering the civil engineering education: A capstone case study in a Malaysian university. (Submitted)

., Faiz Ahmad, Muhammad Rafi Raza, Ali Samer Muhsan, Mohd Afian Ome (2013) PREPARATION AND FIBER FRACTURE OF METAL MATRIX COMPOSITE FEED-STOCK FOR POWDER INJECTION MOLDING. PREPARATION AND FIBER FRACTURE OF METAL MATRIX COMPOSITE FEED-STOCK FOR POWDER INJECTION MOLDING..

., Muhammad Rafi Raza, Faiz Ahmad, MA Omar, RM German, Ali S Muhsan (2013) Role of debinding to control mechanical properties of powder injection molded 316L stainless steel. Role of debinding to control mechanical properties of powder injection molded 316L stainless steel.

., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, M Rafi Raza (2013) Nanoscale dispersion of carbon nanotubes in copper matrix nanocomposites for thermal management applications. Nanoscale dispersion of carbon nanotubes in copper matrix nanocomposites for thermal management applications.

., Ali Samer, Malek Ali, Projjal Basu, Faiz Ahmad (2013) Wear resistance of Al-12Si alloys by reinforcing TiC and TiN particles. Wear resistance of Al-12Si alloys by reinforcing TiC and TiN particles. (Submitted)

A

Aja, Ogboo Chikere and Al-Kayiem, Hussain H. (2013) Review of municipal solid waste management options in Malaysia, with emphasis on sustainable waste-to-energy options. Journal of Material Cycles and Waste Management. pp. 1-18. ISSN 14384957

Abbas, Ghulam and Sandeep, Kumar and Ahmed, Elrayah (2013) Improving Oil Well Cement Slurry Performance Using Hydroxypropylmethylcellulose Polymer. Advanced Materials Research Vol. 787 (2013) pp 222-227, 787. pp. 222-227.

A. Hassaballa, Abdul-Haleem and Matori, Abdul Nasir and M. Shafri, H. Z. (2013) Generation of Extensive Moisture Content’s Map Using Weighted Moisture Values Over Multi-Surface Cover Types. Research Journal of Applied Sciences, Engineering and Technology. pp. 1-9. ISSN 2040-7467

Ab Aziz, Norshakirah and Ahmad, Rohiza and Dominic P, Dhanapal Durai (2013) Trust-based partner identification method for e-supply chain (B2B) integrator – a case study of Malaysian construction industry. International Journal of Logistics Systems and Management, 14 (1). pp. 93-109. ISSN 1742-7975 (In Press)

Amir, Norlaili and Ahmad, Faiz and Megat-Yusoff, Puteri Sri Melor (2013) Char Strength of Wool Fibre Reinforced Epoxy-Based Intumescent Coatings (FRIC). Advanced Materials Research, 626. pp. 504-508.

A Majid, M Amin and Sulaiman, S. A. and Mokhtar, Hamdan and Tamiru, A. L. (2013) Operating Point Estimation for an Absorption Process using Data Clustering Technique. Journal of Applied Sciences, 13. pp. 377-384. ISSN 18125654

Atnaw, Samson Mekbib and Sulaiman, S. A. and Yusup, Suzana (2013) Syngas production from downdraft gasification of oil palm fronds. Energy , 61. pp. 491-501. ISSN 3605442

Azam, Muhammad Rizwan and Isa , M Tan and Ismail, Lukman and Mushtaq, Muhammad and Nadeem, Muhammad and Sagir, Muhammad (2013) Kinetics and Equilibria of Synthesized Anionic Surfactant onto Berea Sandstone. Journal of Dispersion Science and Technology (ja). null. (In Press)

Abdalla HASSABALLA, Abdalhaleem and MATORI , Abdul Nasir and Mohd SHAFRI, Helmi Zulhaidi (2013) Surface Moisture Content Retrieval from Visible/Thermal Infrared Images and Field Measurements. Caspian Journal of Applied Sciences Research. pp. 182-189. ISSN 2251-9114

Abd Majid, Mohd Amin and Sulaiman, S. A. and Mokhtar, Hamdan and Tamiru, A. L. (2013) Operating Point Estimating for an Absorption Process using Data Clustering Technique. Journal of Applied Sciences. ISSN 18125654

Al-Jemeli, Marwan and Hussin, Fawnizu Azmadi (2013) Energy Efficient and High Throughput Composite Routing Metric for Mobile Wireless Sensor Networks. International Review on Computers and Software (IRECOS), 8 (9). ISSN 1828-6011

Abdul Latiff, Abdul Halim (2013) Seismic Illumination Analysis of Different Shallow Gas Cloud Velocities by Focal Beam Method. Seismic Illumination Analysis of Different Shallow Gas Cloud Velocities by Focal Beam Method.

Al-Kayiem, H.H. and Jamil, I.E.A. (2013) Theoretical modeling of pseudo hydrostatic force in solid-liquid pipe flow with two layers. Pertanika Journal of Science and Technology, 21 (2). pp. 521-532.

Abdullah, S.B. and Man, Z. and Bustam, M.A. (2013) Investigation on aromaticity index and double-bond equivalent of aromatic compounds and ionic liquids for fuel desulphurization. Journal of Chemistry, 2013.

Amin, H.U. and Malik, A.S. and Subhani, A.R. and Badruddin, N. and Chooi, W.-T. (2013) Dynamics of scalp potential and autonomic nerve activity during intelligence test. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8226 L (PART 1). pp. 9-16.

Ali, H.O. and Rozan, M.Z. and Abubakar, A. and Zeki, A.M. and Sharif, A.M. and Uddin, M. and Memon, J. (2013) Assessing issues of change impact analysis process for a software projects. World Applied Sciences Journal, 28 (10). pp. 1366-1374.

Affam, A.C. and Chaudhuri, M. (2013) Degradation of pesticides chlorpyrifos, cypermethrin and chlorothalonil in aqueous solution by TiO2 photocatalysis. Journal of Environmental Management, 130. pp. 160-165.

Al-Wakeel, H.B. and Karim, Z.A.A. and Al-Kayiem, H.H. and Fawad, H. (2013) Numerical simulation of high frequency electromagnetic wave in microwave cavity for soot oxidation. Applied Mechanics and Materials, 459. pp. 310-318.

Abbas, M.A. and Ahmad, W.F.W. and Kalid, K.S. (2013) Heuristics evaluation of preschool cognitive skills learning system. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 671-682.

Abdulkarim, M. and Shafie, A. and Wan Ahmad, W.F. and Razali, R. (2013) A simulation study on factors affecting airwaves using factorial design. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 206-217.

Ali, A.S.O. and Asirvadam, V.S.A. and Malik, A.S. and Aziz, A. (2013) A geometrical approach for age-invariant face recognition. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 81-96.

Aja, O.C. and Al-Kayiem, H.H. and Abdul Karim, Z.A. (2013) Analytical investigation of collector optimum tilt angle at low latitude. Journal of Renewable and Sustainable Energy, 5 (6).

Ahmad Fadzil, M.H. and Prakasa, E. and Asirvadam, V.S. and Nugroho, H. and Affandi, A.M. and Hussein, S.H. (2013) 3D surface roughness measurement for scaliness scoring of psoriasis lesions. Computers in Biology and Medicine, 43 (11). pp. 1987-2000.

Alser, M.H. and Assaad, M.M. and Hussin, F.A. (2013) A wide-range programmable frequency synthesizer based on a finite state machine filter. International Journal of Electronics, 100 (11). pp. 1546-1556.

Atnaw, S.M. and Sulaiman, S.A. and Yusup, S. (2013) Syngas production from downdraft gasification of oil palm fronds. Energy, 61. pp. 491-501.

Ahmad Azmy, A. and Karuppanan, S. and Abdul Wahab, A. (2013) Failure pressure estimation of corroded pipeline with different depths of interacting defects subjected to internal pressure. Applied Mechanics and Materials, 393. pp. 1005-1010.

Alimanesh, M. and Rouhi, J. and Zainal, N. and Kakooei, S. and Hassan, Z. (2013) Growth of vertically aligned ZnO nanorods arrays by hydrothermal method. Advanced Materials Research, 795. pp. 616-619.

Ahmed, R. and Chandra, M.S. (2013) Equilibrium modeling in updraft gasifier for refinery sludge gasification using ASPEN PLUS simulator. Applied Mechanics and Materials, 393. pp. 729-734.

Arpit and Shafie, A. and Ahmad, W.F. (2013) Automata for modeling reversible probabilistic processes. Applied Mechanics and Materials, 422. pp. 185-190.

Azmi, A. and Balasubramanian, P. and Abdullah, B. and Zhalehrajabi, E. (2013) Sensitivity of the CFD mesh for a single rising bubble in a hallimond tube. Applied Mechanics and Materials, 372. pp. 26-29.

Ahmed, I. and Idris, A. and Hussain, A. and Yusof, Z.A.M. and Saad Khan, M. (2013) Influence of co-solvent concentration on the properties of dope solution and performance of polyethersulfone membranes. Chemical Engineering and Technology, 36 (10). pp. 1683-1690.

Aminu, M. and Ludin, A.N.B.M. and Matori, A.-N. and Wan Yusof, K. and Dano, L.U. and Chandio, I.A. (2013) A spatial decision support system (SDSS) for sustainable tourism planning in Johor Ramsar sites, Malaysia. Environmental Earth Sciences, 70 (3). pp. 1113-1124.

Ali, S. and Mohd Zabidi, N.A. and Abdul Aziz, M.A. and Ahmad, K. and Sidik, M.I. and Muin, M.A. (2013) Effects of synthesis technique on the physical properties of co-fe nanoparticles on cnts support. Malaysian Journal of Microscopy, 9 (1). pp. 47-51.

Ali, S. and Zabidi, N.A.M. and Aziz, M.A.A. and Ahmad, K. and Sidik, M.I. and Muin, M.A. (2013) Effects of synthesis technique on the physical properties of co-fe nanoparticles on cnts support. Malaysian Journal of Microscopy, 9 (1). pp. 5-9.

Ansari, A. and Bt Shafie, A. and Ansari, S. and Md Said, A.B. and Nyamasvisva, E.T. (2013) Filtration of airwave in seabed logging using principal component analysis. Communications in Computer and Information Science, 414. pp. 56-64.

Ahmed, M.M. and Kutty, S.R.M. and Khamidi, M.F. and Dominic, P.D.D. (2013) Hazards related to petrol fuel stations during operation and maintenance. Malaysian Construction Research Journal, 12 (1). pp. 99-116.

Amin, H. and Malik, A.S. (2013) Human memory retention and recall processes: A review of EEG and fMRI studies. Neurosciences, 18 (4). pp. 330-334.

Ali, T. and Jung, L.T. and Faye, I. (2013) An angle based flooding protocol for underwater wireless sensor networks. Journal of Engineering and Applied Sciences, 8 (9). pp. 295-303.

Abbas, G. and Irawan, S. and Memon, K.R. and Kumar, S. and Elrayah, A.A.I. (2013) Hydroxypropylmethyl cellulose as a primary viscosifying agent in cement slurry at high temperature. International Journal of Automotive and Mechanical Engineering, 8 (1). pp. 1218-1225.

Aja, O.C. and Al-Kayiem, H.H. and Abdul Karim, Z.A. (2013) Experimental investigation of the effect of wind speed and wind direction on a solar chimney power plant. WIT Transactions on Ecology and the Environment, 179 VO. pp. 945-955.

Al-Kayiem, H.H. (2013) Energy sustainability through integrated solar thermal systems. WIT Transactions on Ecology and the Environment, 179 VO. pp. 887-897.

Azeemuddin and Al-Kayiem, H.H. and Gilani, S.I. (2013) Simulation of a collector using waste heat energy in a solar chimney power plant system. WIT Transactions on Ecology and the Environment, 179 VO. pp. 933-944.

B

Balogun, Abdul-Lateef and Matori, Abdul Nasir and Wan Yusof, Khamaruzaman and Dano Umar, Lawal and Ahmed Chandio, Imtiaz (2013) Geographic Information System (GIS) in Offshore Pipeline Route Selection: Past, Present, and Future. Pensee Journal, 75 (9). pp. 374-396. ISSN 00314773

Bataee, Mahmood and Reisabadi, Mohammadreza Zare and Yahyazadeh, Amin (2013) Production Optimization Using Different Scenarios of Gas Lift and ESP Installation. International Journal of Petroleum and Geoscience Engineering (IJPGE), 1 (1). pp. 50-61. ISSN 2289-4713

bin Ibrahim, M.F. and Ovinis, M. and bin Shehabuddeen, K. (2013) An underwater glider for subsea intervention: A technical feasibility study. Applied Mechanics and Materials, 393. pp. 561-566.

C

Chan, Yi Herng and Armando T., Quitain (2013) Conversion of Oil Palm Biomass to Bio-oil Under Sub- and Supercritical Conditions. Conversion of Oil Palm Biomass to Bio-oil Under Sub- and Supercritical Conditions. (Unpublished)

Chan, Yi Herng and Armando T., Quitain (2013) Sub- and Supercritical Hydrothermal Liquefaction of Oil Palm Biomass to Bio-oil. Sub- and Supercritical Hydrothermal Liquefaction of Oil Palm Biomass to Bio-oil. (In Press)

Choong Chee Meng, Avalon Chin Soon Mun, Nurul Aishah Hanafi, Ask, . (2013) The 3rd International Conference on the Palaeontology of South-East Asia. The 3rd International Conference on the Palaeontology of South-East Asia.

Choong Chee Meng, Avalon Chin Soon Mun, Nurul Aishah Hanafi, Ask, . (2013) ICPSEA3 2013: The 3rd International Conference on the Palaeontology of South-East Asia. ICPSEA3 2013: The 3rd International Conference on the Palaeontology of South-East Asia.

Choo, C.-S. and Shafiq, N. and Nuruddin, F.M. (2013) Effects of large openings in the shear zone of reinforced concrete beams. Malaysian Construction Research Journal, 13 (2). pp. 15-27.

Ching, D.L.C. and Abdul Aziz, Z. and Salah, F. (2013) Study of polarized wave with a hydrodynamic model and Fourier spectral method. Modelling and Simulation in Engineering, 2013.

D

Dano Umar, Lawal and Matori, Abdul Nasir and Wan Yusof, Khamaruzaman and Ahmed Chandio, Imtiaz (2013) Geographic Information System (GIS) in Offshore Pipeline Route Selection: Past, Present, and Future. Pensee Journal, 75 (9). pp. 374-396. ISSN 00314773

Demie, S and Nuruddin, F and Shafiq, N. (2013) Effects of micro-structure characteristics of interfacial transition zone on the compressive strength of self-compacting geopolymer concrete. Construction and Building Materials, 41. pp. 91-98. ISSN 0950-0618

Dewangan, S. and Biswas, C.K. (2013) Optimisation of machining parameters using grey relation analysis for EDM with impulse flushing. International Journal of Mechatronics and Manufacturing Systems, 6 (2). pp. 144-158.

Dang, Khanh Vi and Yusup, Suzana and Uemura, Yoshimitsu and Nuruddin, F (2013) Catalytic Pyrolysis of Rice husk via Semi-batch Reactor using L9 Taguchi Orthogonal Array. Advanced Materials Research, 787. pp. 184-189. ISSN 1662-8985

Dano Lawal, Umar and Matori , Abdul-Nasir and Wan Yusof , Khamaruzaman and Mustafa Hashim, Ahmad and Aminu, Mansir and Sabri , Soheil and Balogun, Abdul-Lateef and Ahmed Chandio, Imtiaz and Radin Mohd Mokhtar, Munirah (2013) Group-based Decision Support for Flood Hazard Forecasting: A Geospatial Technology-based Group Analytic Hierarchy Process Approach. Research Journal of Applied Sciences, Engineering and Technology. ISSN 2040-7467 (In Press)

Dano Umar, Lawal and Matori, Abdul Nasir and Wan Yusof, Khamaruzaman and Mustafa Hashim , Ahmad and Aminu, Mansir and Sabri, Soheil and Balogun, Abdul-Lateef and Ahmed Chandio, Imtiaz and Radin Mohd Mokhtar, Munirah (2013) Flood Susceptibility Modeling: A Geo-Spatial Technology Multi-Criteria Decision Analysis Approach. Research Journal of Applied Sciences, Engineering and Technology. ISSN 2040-7467 (In Press)

Devi Wilfred, C. and Man, Z. and Phak Chan, Z. (2013) Predicting methods for sulfur removal from model oils using COSMO-RS and partition coefficient. Chemical Engineering Science, 102. pp. 373-377.

Drieberg, M. and Sahoo, N.C. (2013) On resonance and frequency response characteristics of electrical circuits. International Journal of Electrical Engineering and Education, 50 (4). pp. 368-383.

Dan-mallam, Y. and Abdullah, M.Z. and Yusoff, P.S.M.M. (2013) Mechanical properties of knitted kenaf fiber reinforced polyoxymethylene (pom) laminate composite. Malaysian Journal of Microscopy, 9 (1). pp. 31-36.

Dakssa, L.M. and Harahap, I.S.H. (2013) The performance of the SPH method in simulating surface runoff along a saturated soil slope. International Journal of Safety and Security Engineering, 3 (2). pp. 77-87.

Daffalla, S.B. and Mukhtar, H. and Shaharun, M.S. (2013) Sorption of phenol from aqueous solutions using acid-treated rice husk. WIT Transactions on Ecology and the Environment, 179 VO. pp. 1177-1188.

E

Elneel, R. and Sulaiman, S. A. and Ariwahjoedi, B. (2013) Prediction of Heating Values of Oil Palm Fronds from Ultimate Analysis. Journal of Applied Sciences, 13 (3). pp. 491-196. ISSN 1812-5654

Elamvazuthi, I. and Vasant, P. and Ganesan, T. (2013) Hybrid Optimization Techniques for Optimization in a Fuzzy Environment. Intelligent Systems Reference Library, 38. pp. 1025-1046.

Elkhalifah, A.E.I. and Maitra, S. and Bustam, M.A. and Murugesan, T. (2013) Effects of exchanged ammonium cations on structure characteristics and CO2 adsorption capacities of bentonite clay. Applied Clay Science, 83-84. pp. 391-398.

F

Foong, O.-M. and Sulaiman, S. and Ling, K.K. (2013) Text signage recognition in android mobile devices. Journal of Computer Science, 9 (12). pp. 1793-1802.

Farooq, M. and Ramli, A. and Subbarao, D. (2013) Biodiesel production from waste cooking oil using bifunctional heterogeneous solid catalysts. Journal of Cleaner Production, 59. pp. 131-140.

G

Getu, M. and Mahadzir, S. and Lee, M. (2013) Profit optimization for chemical process plant based on a probabilistic approach by incorporating material flow uncertainties. Computers and Chemical Engineering, 59. pp. 186-196.

Ghayas, S. and Sulaiman, S. and Khan, M. and Jaafar, J. (2013) The effects of icon characteristics on users' perception. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 652-663.

Goh, K.N. and Mohd. Shukri, S.R. and Manao, R.B.H. (2013) Automatic assessment for engineering drawing. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 497-507.

Goh, K.N. and Chen, Y.Y. and Daud, S.C. and Sivaji, A. and Soo, S.T. (2013) Designing a checklist for an e-commerce website using Kansei engineering. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 483-496.

Ghulam, M. and Mohd, S.A. and Azmi, B.M. (2013) Solubility of carbon dioxide in aqueous solution of 2-amino-2- hydroxymethyl-1, 3-propanediol at elevated pressures. Research Journal of Chemistry and Environment, 17 (10). pp. 41-45.

Ganesan, T. and Vasant, P. and Elamvazuthi, I. (2013) Normal-boundary intersection based parametric multi-objective optimization of green sand mould system. Journal of Manufacturing Systems, 32 (1). p. 197.

Ganesan, T. and Elamvazuthi, I. and Shaari, K.Z.K. and Vasant, P. (2013) An algorithmic framework for multiobjective optimization. The Scientific World Journal, 2013.

H

Harun, H. A. and Buyamin, Norsheila and Othman, M. A. and Sulaiman, S. A. (2013) A Case Study on Indoor Comfort of Lecture Rooms in University Buildings. Applied Mechanics and Materials, 393. pp. 821-826. ISSN 1660-9336

Hashmet, Muhammad R. and Onur, Mustafa and Tan, Isa M. (2013) Empirical Correlations for Viscosity of Polyacrylamide Solutions with the Effects of Salinity and Hardness. Journal of Dispersion Science and Technology (ja). null. (In Press)

Hussin, Fawnizu Azmadi and Osman, Zahraa E. M. and Xia, Likun and Zain Ali, Noohul Basheer (2013) Optimization of Processor Architecture for Sobel Real-Time Edge Detection Using FPGA. International Review on Computers and Software (IRECOS), 8 (4). ISSN 1828-6011

Habib, K. and Choudhury, B. and Chatterjee, P.K. and Saha, B.B. (2013) Study on a solar heat driven dual-mode adsorption chiller. Energy, 63. pp. 133-141.

Hussain, A. and Ahmed, I. and Sait, H.H. and Bassyouni, M.I. and Hegab, A.M. and Ul Hasan, S.W. and Nasir Ani, F. (2013) Experimental and simulation study of fluidization behavior of palm biomass in a circulating fluidized bed riser. Industrial and Engineering Chemistry Research, 52 (49). pp. 17529-17537.

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. (2013) Combustion characteristics of direct-injection spark-ignition engine fuelled with producer gas. Energy Education Science and Technology Part A: Energy Science and Research, 31 (3). pp. 1683-1698.

Hassan, S. and Kee, L.S. and Al-Kayiem, H.H. (2013) Experimental study of palm oil mill effluent and oil palm frond waste mixture as an alternative biomass fuel. Journal of Engineering Science and Technology, 8 (6). pp. 703-712.

Harimurti, S. and Rahmah, A.U. and Omar, A.A. and Thanapalan, M. (2013) Kinetics of methyldiethanolamine mineralization by using UV/H2O2 Process. Clean - Soil, Air, Water, 41 (12). pp. 1165-1174.

Hilmee, M.I. and Chandra, M.S. and Karuppanan, S. and Fadhil, H.A.M. and Lias, M.R. (2013) Effects of different granular viscosity models on the bubbling fluidized bed - A numerical approach. Applied Mechanics and Materials, 393. pp. 857-862.

Harun, H.A. and Buyamin, N. and Othman, M.A. and Sulaiman, S.A. (2013) A case study on indoor comfort of lecture rooms in university buildings. Applied Mechanics and Materials, 393. pp. 821-826.

Hashim, R. and Fitri, A. and Motamedi, S. and Hashim, A.M. (2013) Modelling of coastal hydrodymics associated with coastal structures: A review. Malaysian Journal of Science, 32 (SPEC. ). pp. 149-154.

Harimurti, S. and Rahmah, A.U. and Omar, A.A. and Thanapalan, M. (2013) Kinetics of methyldiethanolamine mineralization by using UV/H2O2 Process. Clean - Soil, Air, Water, 41 (12). pp. 1165-1174.

I

Isa, Muhammad Aimen and Eldemerdash, Usama and Nasrifar, Khashayar (2013) Evaluation of potassium formate as a potential modifier ofTEG for high performance natural gas dehydration process. Chemical Engineering Research and Design . ISSN 2638762 (In Press)

Izza Arshad, N. and Mohamed Ariff, M.I. (2013) Electronic content management systems use and implementation in highly integrated businesses. World Applied Sciences Journal, 28 (12). pp. 2221-2228.

Ilyas, S.U. and Pendyala, R. and Marneni, N. (2013) Settling characteristics of alumina nanoparticles in ethanol-water mixtures. Applied Mechanics and Materials, 372. pp. 143-148.

J

Javed, E. and Faye, I. and Malik, A.S. (2013) Reduction of Ballistocardiogram artifact using EMD-AF. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8228 L (PART 3). pp. 533-540.

Jadid Abdulkadir, S. and Yong, S.-P. (2013) Unscented Kalman filter for noisy multivariate financial time-series data. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8271 L. pp. 87-96.

Jamil, F. and Ahmad, M.M. and Yusup, S. (2013) Comparative study for catalytic cracking of model bio-oil and palm kernel shell derived bio-oil. Advanced Materials Research, 781-78. pp. 2476-2479.

Johl, S.K. and Kaur Johl, S. and Subramaniam, N. and Cooper, B. (2013) Internal audit function, board quality and financial reporting quality: Evidence from Malaysia. Managerial Auditing Journal, 28 (9). pp. 780-814.

K

Kareem, M. W. and Habib, Khairul and Sulaiman, S. A. (2013) Comparative Study of Single Pass Collector and Double Pass Solar Collector Filled with Porous Media. Asian Journal of Scientific Research, 6 (3). pp. 445-455. ISSN 19921454

Karim, S.A.A. and Ismail, M.T. and Hasan, M.K. and Sulaiman, J. (2013) Denoising the temperature data using wavelet transform. Applied Mathematical Sciences, 7 (117-12). pp. 5821-5830.

Karim, S.A.A. (2013) Rational cubic Ball functions for positivity preserving. Far East Journal of Mathematical Sciences, 82 (2). pp. 193-207.

Khan, K. and Baharudin, B.B. and Khan, A. (2013) Mining opinion targets from text documents: A review. Journal of Emerging Technologies in Web Intelligence, 5 (4). pp. 343-353.

Khoo, B.K. and Ovinis, M. and Nagarajan, T. (2013) A comparative analysis of inductors with square and conical contours. Applied Mechanics and Materials, 415. pp. 414-417.

L

Liew, M. S. and Wan Abdullah Zawawi, Noor Amila (2013) South Korea and Malaysia Relations in O&G: Mutual Cooperation in Offshore Initiatives. South Korea and Malaysia Relations in O&G: Mutual Cooperation in Offshore Initiatives, 11. pp. 4-7.

Liew, M. S. and Tengku Shahdan, T.N and Lim, Eu Shawn (2013) Strategic and Tactical Approaches on University - Industry Collaboration. Procedia-Social and Behavioral Sciences Journal. ISSN 1877-0428

Lefebvre, B. and Sumrall, C.D. and Shroat-Lewis, R.A. and Reich, M. and Webster, G.D. and Hunter, A.W. and Nardin, E. and Rozhnov, S.V. and Guensburg, T.E. and Touzeau, A. and Noailles, F. and Sprinkle, J. (2013) Palaeobiogeography of Ordovician echinoderms. Geological Society Memoir, 38 (1). pp. 173-198.

Lawal, I.A. and Md Said, A. and Mu'azu, A.A. (2013) Simulation model to improve QoS performance over fixed WiMAX using OPNET. Research Journal of Applied Sciences, Engineering and Technology, 6 (21). pp. 3933-3945.

Li, S. and Pham, C. and Jaekel, A. and Matin, M.A. and Amin, A.H.M. and Li, Y. (2013) Perception, reaction, and cognition in wireless sensor networks. International Journal of Distributed Sensor Networks, 2013.

Lias, M.R. and Awang, M. and Rao, T.V.V.L.N. (2013) A numerical FEM solution of gear root stress in offset axial mesh misalignment. Applied Mechanics and Materials, 393. pp. 375-380.

Le Dinh, L. and Vo Ngoc, D. and Vasant, P. (2013) Artificial bee colony algorithm for solving optimal power flow problem. The Scientific World Journal, 2013.

M

M.E. Ahmed, Sami Mustafa and Wan Abdullah Zawawi, Noor Amila and Ghazali, Zulkipli (2013) A Critical Review on the Development of a Theoretical Framework for Managing Environmental Impacts of Construction Project. World Academy of Science, Engineering and Technology (WASET). pp. 655-659. ISSN pISSN 2010-376X, eISSN 2010-3778

Mahmood, Salman and Burhanudin, Zainal Arif and Salman, Aysha (2013) Field emission model of carbon nanotubes to simulate gas breakdown in ionization gas sensor. JOURNAL OF APPLIED PHYSICS, 113 (2). 023302-1. ISSN 0021-8979

Mukhtar, Hilmi and Zakaria, Man and Mohshim, Dzeti and Nasir, Rizwan (2013) Latest Development on Membrane Fabrication for Natural Gas Purification: A Review. Journal of Engineering, 2013 (101746). pp. 1-7.

Marneni, Narahari and Sulaiman, S. A. (2013) Thermal Radiation Effects on Unsteady MHD Natural Convection Flow Past an Infinite Inclined Plate with Ramped Temperature. Advanced Science Letters, 19 (1). pp. 296-300. ISSN 1936-6612

Mustaffa, Zahiraniza (2013) Characteristics of Corrosion Degradation in Carbon Steel Pipelines. Advanced Materials Research, 626. pp. 807-812. ISSN 1662-8985 (In Press)

Mahgoub, B. K. M. and Sulaiman, S. A. and Abdul Karim, Z. A. (2013) Performance of a Compression Ignition Engine Fuelled by Diesel and Imitated Syngas. Asian Journal of Scientific Research, 6 (3). pp. 456-466. ISSN 19921454

Mahgoub, B. K. M. and Sulaiman, S. A. and Abdul Karim, Z. A. (2013) Performance of a Compression ignition Engine Fuelled by Diesel and Imitated Syngas. Asian Journal of Scientific Research, 6 (3). pp. 456-466. ISSN 1992-1454

Majid , Suhana Ab and Nazri, Azmarini A. and Sulaiman, S. A. (2013) Study on Indoor Air Quality of a Small Office in a Tropical Country. Applied Mechanics and Materials, 393. pp. 827-831. ISSN 1660-9336

Mushtaq, Muhammad and Tan, Isa M. and Ismail, Lukman and Nadeem, Muhammad and Sagir, Muhammad and Azam, Rizwan and Hashmet, Rehan (2013) Influence of PZC (Point of Zero Charge) on the Static Adsorption of Anionic Surfactants on a Malaysian Sandstone. Journal of Dispersion Science and Technology (ja). null. (In Press)

Mushtaq, Muhammad and Tan, Isa M. and Ismail, Lukman and Lee, Susan Y. C and Nadeem, M. and Sagir, M. (2013) Oleate Ester-Derived Nonionic Surfactants: Synthesis and Cloud Point Behaviour Studies. Journal of Dispersion Science and Technology (ja). null. (In Press)

Mushtaq, M. and Tan, Isa and Nadeem, M. and Devi, C. and Lee, S. and Sagir, M. and Rashid, U. (2013) Epoxidation of methyl esters derived from Jatropha oil: An optimization study. Grasas y Aceites, 64 (1).

Moradi, B. and Awang, M.B. (2013) Heat transfer in the formation. Research Journal of Applied Sciences, Engineering and Technology, 6 (21). pp. 3927-3932.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Raza, M.R. (2013) Fabrication and microstructural analysis of CNTs reinforced copper matrix nanocomposites via MIM technique. Applied Mechanics and Materials, 459. pp. 11-17.

Malik, M.S.A. and Sulaiman, S. (2013) Analytical comparison of factors affecting EHR visualization for physicians in public health care units. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 605-614.

Muthuvalu, M.S. and Sulaiman, J. (2013) The quarter-sweep Geometric Mean method for solving second kind linear Fredholm integral equations. Bulletin of the Malaysian Mathematical Sciences Society, 36 (4). pp. 1009-1026.

Muthuvalu, M.S. and Sulaiman, J. (2013) Performance analysis of the first order linear stationary iterative methods in solving third order Newton-Cotes quadrature system. International Journal of Mathematics and Computers in Simulation, 7 (4). pp. 379-387.

Mannan, H.A. and Mukhtar, H. and Murugesan, T. and Nasir, R. and Mohshim, D.F. and Mushtaq, A. (2013) Recent applications of polymer blends in gas separation membranes. Chemical Engineering and Technology, 36 (11). pp. 1838-1846.

Malik, F. and Baharudin, B. (2013) The statistical quantized histogram texture features analysis for image retrieval based on median and laplacian filters in the DCT domain. International Arab Journal of Information Technology, 10 (6).

Moayedi, F. and Zakaria, R. and Bigah, Y. and Mustafar, M. and Puan, O.C. and Zin, I.S. and Klufallah, M.M.A. (2013) Conceptualising the indicators of walkability for sustainable transportation. Jurnal Teknologi (Sciences and Engineering), 65 (3). pp. 85-90.

Majid, S.A. and Azmarini, A.N. and Sulaiman, S.A. (2013) Study on indoor air quality of a small office in a tropical country. Applied Mechanics and Materials, 393. pp. 827-831.

Mohammed, B.S. and Woen, E.L. and Malek, M.A. and Sing, W.L. and Abbas, N.A. and Yusop, H. and Muda, R.S. and Hashim, M. and Yong, U. (2013) Development of sediment brick utilizing reservoir sediment and fly ash. Applied Mechanics and Materials, 420. pp. 276-280.

Muhammad, A. and Rahmanian, N. and Pendyala, R. (2013) Flow analysis of melted urea in a perforated rotating bucket. Applied Mechanics and Materials, 372. pp. 340-345.

Machmudah, A. and Parman, S. (2013) Feasible Joint Angle Continuous Function of Robotics Arm in Obstacles Environment Using Particle Swarm Optimization. Intelligent Systems Reference Library, 38. pp. 1047-1071.

Md. Said, A. (2013) Vector-projection approach to curve framing for extruded surfaces. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7971 L (PART 1). pp. 596-607.

Mohshim, D.F. and Mukhtar, H.B. and Man, Z. and Nasir, R. (2013) Latest Development on Membrane Fabrication for Natural Gas Purification: A Review. Journal of Engineering (United Kingdom), 2013.

Mohammadpour, E. and Awang, M. (2013) Non-linear multi-scale finite element method for prediction of tensile behaviour of carbon nanotube-reinforced polymer composites Nelinearna, viÅ¡eskalna metoda konaÄ�nih elemenata za predvidanje vlaÄ�nog ponaÅ¡anja polimernih kompozita ojaÄ�anih ugljiÄ�nim nanocijevima. International Journal for Engineering Modelling, 26 (1-4). pp. 59-64.

Malik, M.S.A. and Sulaiman, S. and Malik, M.F.A. (2013) Relational factors of EHR database in visual analytic systems for public health care units. Communications in Computer and Information Science, 414. pp. 161-172.

Mustafa, A.T. and Al-Kayiem, H.H. and Gilani, S.I.U. (2013) A review of the vortex engine. WIT Transactions on Ecology and the Environment, 179 VO. pp. 911-920.

N

Na, Kai Lun and Wan Abdullah Zawawi, Noor Amila and Liew, M. S. and A Razak, Zahari (2013) Adaptive Reuse of Offshore Structure Steel: The Way Forward for Malaysia? MOGSC Bulletin 2013.

Nordin, Normayati and Abdul Karim, Z. A. and Othman, Safiah and Raghavan, V. R. (2013) Design and Development of Low Subsonic Wind Tunnel for Turning Diffuser Application. Advanced Materials Research, 614. pp. 586-591. ISSN 1662-8985

Nasrifar, Khashayar (2013) A Perturbed-Chain SAFT Equation of State Applied to Mixtures of Short- and Long-Chain n‑Alkanes. Industrial Engineering Chemistry Research. ISSN 0888-5885 (In Press)

Naz, Muhammad Yasin and Sulaiman, S. A. and Ariwahjoedi, B. (2013) Experimental Study of Airless Spray Jet Breakup at Elevated Temperature and Pressure. Applied Mechanics and Materials, 393. pp. 711-716. ISSN 1660-9336

Nazri, Azmarini A. and Majid, Suhana Ab. and Zakaria, Supaat Hj. and Sulaiman, S. A. (2013) A Study on IAQ in a Welding Laboratory. Applied Mechanics and Materials, 393. pp. 947-952. ISSN 1660-9336

Norbert Simon, Michael Crozier, Mairead de Roiste, Abdul Ghani R, . (2013) Point based assessment: selecting the best way to represent landslide polygon as point frequency in landslide investigation. Point based assessment: selecting the best way to represent landslide polygon as point frequency in landslide investigation.

N. Syazwani B.J. Pierson, A.W. Hunter, . (2013) Diagenetic Responses to Sea Level Changes on Pleistocene-Holocene Carbonates in the Celebes Sea, East Sabah, Malaysia. Diagenetic Responses to Sea Level Changes on Pleistocene-Holocene Carbonates in the Celebes Sea, East Sabah, Malaysia.

Nazir, B. and Hasbullah, H. (2013) Energy efficient and QoS aware routing protocol for Clustered Wireless Sensor Network. Computers and Electrical Engineering, 39 (8). pp. 2425-2441.

Nasif, M.S. and Al-Waked, R. and Behnia, M. and Morrison, G. (2013) Air to air fixed plate enthalpy heat exchanger, performance variation and energy analysis. Journal of Mechanical Science and Technology, 27 (11). pp. 3541-3551.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. (2013) Experimental study of airless spray jet breakup at elevated temperature and pressure. Applied Mechanics and Materials, 393. pp. 711-716.

Nasif, M.S. and Al Waked, R. (2013) Using computational fluid dynamics simulation to perform fire investigation. Applied Mechanics and Materials, 393. pp. 845-850.

Narahari, M. and Akilu, S. and Jaafar, A. (2013) Free convection flow of a nanofluid past an isothermal inclined plate. Applied Mechanics and Materials, 390. pp. 129-133.

Nordin, J.M. and Aljunid, S.A. and Rahim, R.A. and Anuar, M.S. and Arief, A.R. and Ahmad, R.B. and Saad, M.N. (2013) Performance evaluation of Fi-Wi network based on SCM-optical code division multiple access architecture. Optik, 124 (19). pp. 4046-4051.

Nordin, S.M. and Wan, R. (2013) Ethnography of communication on an offshore oil platform: Bridging organizational communication to ESL pedagogical practices. International Journal of Adult, Community and Professional Learning, 19 (1). pp. 47-57.

O

Otairu, Abdul Ganiyu and Wan Abdullah Zawawi, Noor Amila and Abdullahi Ahmad, Umar and Pakir, Abdul Hamid K. (2013) Public sector perception of barriers to the use of Public-Private Partnerships (PPP) in Nigeria-Findings from a questionnaire survey. Research Journal of Applied Sciences, Engineering and Technology. ISSN 2040-7467 (In Press)

Othman, Abdul Rahim (2013) Effect of different construction designs of aramid fabric on the ballistic performances. Materials & Design.

Oyefolahan, I.O. and Dominic, P.D.D. (2013) Knowledge management systems use and competency development among knowledge workers: The role of socio-technical antecedents in developing autonomous motivation to use. VINE, 43 (4). pp. 482-500.

Osman Ali, A.S. and Asirvadam, V.S.A. and Malik, A.S. and Aziz, A. (2013) Age-Invariant Face Recognition Technique Using Facial Geometry. Communications in Computer and Information Science, 378 CC. pp. 89-98.

Orji, K.U. and Sapari, N. and Yusof, K.W. (2013) Characterization of lake water-groundwater exchange at Lake L5, Universiti Teknologi PETRONAS, Malaysia. WIT Transactions on Ecology and the Environment, 179 VO. pp. 631-639.

P

Partoon, Behzad and Wong, Nurdiana and Sabil, Khalik M and Nasrifar, Khashayar and Ahmad, Mohd Riduan (2013) A study on thermodynamics effect of [EMIM]-Cl and [OH-C2MIM]-Cl on methane hydrate equilibrium line. Fluid Phase Equilibria, 337. pp. 26-31. ISSN 03783812

Partoon, B. and Malik, S.N.A. and Azemi, M.H. and Sabil, K.M. (2013) Experimental investigations on the potential of SDS as low-dosage promoter for carbon dioxide hydrate formation. Asia-Pacific Journal of Chemical Engineering, 8 (6). pp. 916-921.

Padmanabhan, E. and Eswaran, H. and Reich, P.F. (2013) Soil carbon stocks in Sarawak, Malaysia. Science of the Total Environment, 465. pp. 196-204.

Patil, S. and Karuppanan, S. and Abdul Wahab, A. (2013) Contact pressure evaluation of a gear pair along the line of action using finite element analysis. Applied Mechanics and Materials, 393. pp. 403-408.

R

Ridha, Syahrir and Irawan, Sonny and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology. ISSN 2190-0558

Raza, Ali Khan and Ghazali, Zulkipli and Liew, M. S. (2013) A Quantification of Causality between the Construction and Agriculture Sectors of Malaysia (2000-2010). IEEE Xplore.

ramli, nor azam and yahya, ahmad shukri (2013) Ozone phytotoxicity evaluation and prediction of crops production in tropical regions. atmospheric environment, 68. pp. 343-349. ISSN 1352-2310

Rahman, A.U. and Hasbullah, H. and Sama, N.U. (2013) Efficient energy utilization through optimum number of sensor node distribution in engineered corona-based (ONSD-EC) wireless sensor network. Wireless Personal Communications, 73 (3). pp. 1227-1243.

Rahmanian, N. and Ganimi, T.E. and Ghadiri, M. (2013) Further investigations on the influence of scale-up of a high shear granulator on the granule properties. Particuology, 11 (6). pp. 627-635.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology, 3 (4). pp. 303-311.

Rahmanian, N. and Ganimi, T.E. and Ghadiri, M. (2013) Further investigations on the influence of scale-up of a high shear granulator on the granule properties. Particuology, 11 (6). pp. 627-635.

Rashidi, N.A. and Yusup, S. and Hameed, B.H. (2013) Kinetic studies on carbon dioxide capture using lignocellulosic based activated carbon. Energy, 61. pp. 440-446.

Rahmanian, N. and Ganimi, T.E. and Ghadiri, M. (2013) Further investigations on the influence of scale-up of a high shear granulator on the granule properties. Particuology, 11 (6). pp. 627-635.

Rehman, N.U. and Khan, M.A. and Naz, M.Y. and Shafiq, M. and Zakaullah, M. (2013) Characterization of 13.56 MHz RF Ne-N2 mixture plasma using intrusive and non-intrusive diagnostic techniques. Physica Scripta, 88 (4).

Rahmanian, N. and Ganimi, T.E. and Ghadiri, M. (2013) Further investigations on the influence of scale-up of a high shear granulator on the granule properties. Particuology, 11 (6). pp. 627-635.

S

Sonny Irawan, Sonny and Syahrir Ridha , Syahrir and Bambang Ari, Wahjoedi (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology, 3 (4). pp. 303-311. ISSN 2190-0558

Sarlan, Aliza and Rohiza, ahmad and Wan Ahmad, Wan Fatimah and Dominic P, Dhanapal Durai (2013) A study of SME private healthcare personnel acceptance of Clinic Information System in Malaysia. A study of SME private healthcare personnel acceptance of Clinic Information System in Malaysia. (Unpublished)

Sagir, Muhammad and Isa, M Tan and Mushtaq, Muhammad and Ismail, Lukman and Nadeem, Muhammad and Azam, Muhammad Rizwan (2013) Synthesis of a New CO2 Philic Surfactant for Enhanced Oil Recovery Applications. Journal of Dispersion Science and Technology (ja). null. (In Press)

Sagir, Muhammad and Tan, Isa M. and Mushtaq, Muhammad and Ismail, Lukman and Nadeem, Muhammad and Azam, Muhammad Rizwan and Hashmet, Muhammad Rehan (2013) A Novel Surfactant for the Reduction of CO2/Brine Interfacial Tension. Journal of Dispersion Science and Technology (ja). null. (In Press)

Sajid, Muhammad and Ghosh, Deva P. and Satti, Ifthikar (2013) Comparative study of new signal processing to improve S/N ratio of seismic data. ORIGINAL PAPER - EXPLORATION GEOPHYSICS.

S, Jebaraj and S, Iniyan and R, Goic (2013) An optimal electricity allocation model for sustainable resource use in India. International Journal of Energy Research, 37.

Saiful Islam, A.B.M. and Jameel, M. and Ahmad, S. and Jumaat, M.Z. and Kurian, V.J. (2013) Structural behaviour of fully coupled spar-mooring system under extreme wave loading. Journal of Civil Engineering and Management, 19 (SUPPL.). S69-S77.

Sharif, A.M. and Basr, S. and Ali, H.O. (2013) A study on SME software development background and risk assessment implementation in Malaysia. World Applied Sciences Journal, 26 (12). pp. 1637-1642.

Shaikh, P.H. and Nor, N.B.M. and Nallagownden, P. and Elamvazuthi, I. (2013) Indoor building fuzzy control of energy and comfort management. Research Journal of Applied Sciences, Engineering and Technology, 6 (23). pp. 4445-4450.

Salam, M.A. and Sufian, S. and Murugesan, T. (2013) Catalytic hydrogen adsorption of nano-crystalline hydrotalcite derived mixed oxides. Chemical Engineering Research and Design, 91 (12). pp. 2639-2647.

Sutri, N.Y. and Dennis, J.O. and Khir, M.H.M. and Mian, M.U. and Tang, T.B. (2013) Chopper stabilized, low-power, low-noise, front end interface circuit for capacitive CMOS MEMS sensor applications. Modern Applied Science, 7 (12). pp. 34-42.

Soomro, S. and Wan Ahmad, W.F. and Sulaiman, S. (2013) Evaluation of mobile games using playability heuristics. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 264-274.

Shafie, A. and Wan Ahmad, W.F. and Mohd., N. and Barnachea, J.J. and Taha, M.F. and Yusuff, R.L. (2013) "SynMax": A mathematics application tool for Down syndrome children. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 615-626.

Syah Lubis, A.M.H. and Ariwahjoedi, B. and Sudin, M. and Parman, S. (2013) Thermo oxidative degradation behavior of jatropha curcass L. oil in the presence of antioxidant. Applied Mechanics and Materials, 393. pp. 893-898.

Shafiq, M.U. and Kyaw, A. and Shuker, M.T. (2013) A comprehensive research to find suitable acid for sandstone acidizing. Advanced Materials Research, 787. pp. 274-280.

Subhan, F. and Hasbullah, H. and Ashraf, K. (2013) Kalman filter-based hybrid indoor position estimation technique in bluetooth networks. International Journal of Navigation and Observation.

Salam, M.A. and Sufian, S. and Murugesan, T. (2013) Characterization of nano-crystalline Mg-Ni-Al hydrotalcite derived mixed oxides as hydrogen adsorbent. Materials Chemistry and Physics, 142 (1). pp. 213-219.

Shariff, A.M. and Zaini, D. (2013) Using integrated toxic release consequences analysis tool for inherently safer design of process plant at preliminary design stage. Clean Technologies and Environmental Policy, 15 (5). pp. 851-858.

Sabet, M. and Soleimani, H. and Hassan, A. and Ratnam, C.T. (2013) Effects of calcium stearate and metal hydroxide additions on the irradiated LDPE/EVA compound properties. Journal of Polymer Engineering, 33 (7). pp. 651-657.

Salah, F. and Aziz, Z.A. and Ching, D.L.C. (2013) On accelerated MHD flows of second grade fluid in a porous medium and rotating frame. IAENG International Journal of Applied Mathematics, 43 (3). pp. 106-113.

Shah, P.A. and Hasbullah, H.B. and Afghan, S.A. and Jung, L.T. and Lawal, I.A. and Muâ��Azu, A.A. (2013) An enhanced procedure for mobile ipv6 route optimization to reduce handover delay and signaling overhead. Communications in Computer and Information Science, 414. pp. 216-226.

Saw, C.L. and Al-Kayiem, H.H. and Owolabi, A.L. (2013) Experimental investigation on the effect of PCM and Nano-enhanced PCM of integrated solar collector performance. WIT Transactions on Ecology and the Environment, 179 VO. pp. 899-909.

Sutri, Nebyu Yonas and Dennis, John Ojur and Khir, Mohd Haris Md and Mian, Muhammad Umer and Tang, Tong Boon (2013) Chopper stabilized, low-power, low-noise, front end interface circuit for capacitive CMOS MEMS sensor applications. Modern Applied Science, 7 (12). p. 34.

T

Teh, H.M. and Mohammed, N.I. (2013) Experimental study on wave dampening ability of floating breakwaters. Advanced Materials Research, 785-78. pp. 1253-1257.

Turnad, L.G. and Hasan, F. and Ahmad, A.-R.M. and Bambang, A. (2013) Surface integrity and cutting temperature in machining of biomedical magnesium alloys-an overview. Advanced Materials Research, 748. pp. 7-10.

Tang, TB and Lu, CK and Laude, A and Dhillon, B and Murray, AF (2013) Noise reduction for ellipse fitting on medical images. Electronics letters, 49 (3). pp. 178-179.

U

Ullah, R. and Khan, A. and Malik, A.S. (2013) Dual-purpose semi-fragile watermark: Authentication and recovery of digital images. Computers and Electrical Engineering, 39 (7). pp. 2019-2030.

V

Venkiteswaran, V. K. and Sulaiman, S. A. and Raghavan, V. R. (2013) Comparative Study of the Hydrodynamic Performance of Shorter and Longer Blades in a Swirling Fluidized Bed. Advanced Materials Research, 772. pp. 560-565. ISSN 1662-8985

Vuong, P.L. and Xia, L. and Malik, A.S. and Abd Rashid, R.B. (2013) Biomarker development on alcohol addiction using EEG. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8226 L (PART 1). pp. 199-206.

Verma, K. and Hasbullah, H. and Kumar, A. (2013) Prevention of DoS attacks in VANET. Wireless Personal Communications, 73 (1). pp. 95-126.

Vasant, P. (2013) Hybrid Mesh Adaptive Direct Search Genetic Algorithms and Line Search Approaches for Fuzzy Optimization Problems in Production Planning. Intelligent Systems Reference Library, 38. pp. 779-799.

Vo, D.-V.N. and Arcotumapathy, V. and Abdullah, B. and Adesina, A.A. (2013) Non-linear ASF product distribution over alkaline-earth promoted molybdenum carbide catalysts for hydrocarbon synthesis. Catalysis Today, 214. pp. 42-49.

W

Wan Abdullah Zawawi, Noor Amila and Liew, Mohd Shahir and K.L., Na and Idrus, Hairuzila (2013) Engineering the civil engineering education:A capstone case study in a Malaysian University. IEEE International conference on Teaching, Assessment and Learning for Engineering (TALE).

Wan, Roselind and Md Nordin, Shahrina and Razali, Radzuan (2013) International Students’ Cultural Experiences: Exploring Socio-Cultural and Academic Adjustment in Malaysian Universities. Recent Advances in Modern Educational Technologies. pp. 31-37. ISSN ISBN: 978-1-61804-180-7

Wan Abdullah Zawawi, Noor Amila and Abdullahi A., Umar and Khamidi , Mohd Faris and Idrus, Arazi (2013) Regional Stakeholder Perceptions of the Most Important PFI Skills. International Journal of Civil Engineering and Building Materials (IJCEBM), 3 (4). pp. 207-215. ISSN 2223‐487X

Wan Ahmad, W.F. and Butt, S.M. and Rahim, L. (2013) Usability evaluation of the agile software process. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 640-651.

Wan Ahmad, W.F. and Md. Noordin, S. and Md. Shariffuldin, N.S. (2013) Development of a multimedia courseware for slow learner children with reading difficulties: MyLINUS. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 371-382.

Wilfred, C.D. and Mustafa, F.B. (2013) Synthesis, characterization and thermal properties of thiosalicylate ionic liquids. Journal of Chemical Sciences, 125 (6). pp. 1511-1515.

X

Xia, L. and Farooq, M.U. and Bell, I.M. and Hussin, F.A. and Malik, A.S. (2013) Survey and evaluation of automated model generation techniques for high level modeling and high level fault modeling. Journal of Electronic Testing: Theory and Applications (JETTA), 29 (6). pp. 861-877.

Xu, Y. and Choi, J. and Dass, S. and Maiti, T. (2013) Efficient Bayesian spatial prediction with mobile sensor networks using Gaussian Markov random fields. Automatica, 49 (12). pp. 3520-3530.

Y

Yassen, Tadahmun A. and Al-Kayiem, Hussain H. and Khalaf, Maki H. and Mokhlif, N. D. (2013) Analytical analysis of thermal energy storage performance of room heating system by solar energy. Asian Journal of Scientific Research, 6 (2). pp. 135-145. ISSN 19921454

Yiin, Chung Loong and Tan, Meng Kiat (2013) Synthesis of Biodiesel from Ceiba Pentandra using Microwave Assisted Technique. Synthesis of Biodiesel from Ceiba Pentandra using Microwave Assisted Technique. (In Press)

Yaakob, S.M. and Ismail, M.C. (2013) Corrosion inhibitor performance with presence of FeCO3 film in Co2 corrosion environment under fluid flow effect. Advanced Materials Research, 789. pp. 507-510.

Yong, L.H.P. and Pao, W.K.S. and Hashim, F.M. (2013) Fill removal in wellbore using coiled tubing. Applied Mechanics and Materials, 393. pp. 863-871.

Yun, H.M. and Ahmad, J. and Yusup, S. and Kamil, R.N.M. and Chok, V.S. and Tzeng, L.M. (2013) Improvement of low temperature properties of jatropha-corn biodiesel blend with the addition of acrylic Co-polymer. Advanced Materials Research, 781-78. pp. 2480-2483.

Yew, G.Z. and Lim, E.S. and Liew, M.S. and Ng, C.Y. (2013) System identification of a six-legged semisubmersible subjected to wave loads through frequency domain analysis. Applied Mechanics and Materials, 373-37. pp. 770-784.

Yassen, T.A. and Al-Kayiem, H.H. and Habib, K. (2013) Design and performance investigation of a thermal back-up system for hybrid drying. WIT Transactions on Ecology and the Environment, 179 VO. pp. 921-931.

Z

Zin, Nurul Aisyah Mohd and Sulaiman, S. A. (2013) Operating Characteristics of Gasifier Cookstove Using Different Biomass Materials. Applied Mechanics and Materials, 393. pp. 516-521. ISSN 1660-9336

Zaki Abdullah, M. and Dan-Mallam, Y. and Megat Yusoff, P.S.M. (2013) Effect of environmental degradation on mechanical properties of kenaf/polyethylene terephthalate fiber reinforced polyoxymethylene hybrid Composite. Advances in Materials Science and Engineering, 2013.

Zamin, N. and Oxley, A. and Bakar, Z.A. (2013) Projecting named entity tags from a resource rich language to a resource poor language. Journal of Information and Communication Technology, 12 (1). pp. 121-146.

Zarif, S. and Faye, I. and Rohaya, D. (2013) Fast and efficient video completion using object prior position. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 241-252.

Zabiri, H. and Ramasamy, M. and Lemma, T.D. and Maulud, A. (2013) Identification of nonlinear systems using parallel Laguerre-NN model. Advanced Materials Research, 785-78. pp. 1430-1436.

This list was generated on Sat May 18 17:59:48 2024 +08.