Items where Department / MOR is "Mechanical Engineering" and Year is 2007

A

Abdul Karim, Z. A. and Sulaiman, S. A. (2007) Fuel Injection Rate Characteristics and Their Effects on Pollutant Emissions in Diesel Engine. In: 3rd World Engineering Congress, August 2007, Penang, Malaysia.

Abdul Karim, Z. A. and Sulaiman, S. A. and Samni, Z. A. (2007) Performance Analysis of Multi-hole DI Diesel Injectors using Heat Release Rate Modelling. In: Curtin University of Technology Sarawak Engineering Conference (CUTSE), November 2007, Miri, Sarawak.

Abdul Karim, Z. A. and Renganathan, Sumathi and Su Li, Chong (2007) The Importance of Industrial Internship Programme in Engineering Education: Some Critical Success Factors. In: 2nd. Regional Conference on Engineering Education, 3-5 December, 2007, Johor Bahru.

Abdullah, Mohamad Zaki and Bickerton , S and Bhattacharyya, D (2007) Rotational molding cycle time reduction through surface enhanced molds: Part A--theoretical study. Polymer Engineering and Science, 47. pp. 1406-1419.

Ahmad, Faiz and Megat-Yusoff, P.S.M. and B.A. Rani, M. Majdi and Amir, Norlaili (2007) Injection Molded Short-Carbon Fiber Reinforced Silicon Matrix Composites. In: CUTSE2007, Curtin University, Malaysia. (Submitted)

Ahmad, Faiz and Megat-Yusoff, Puteri Sri Melor and HPS Khalil, K.Fuad and Amir, Norlaili (2007) Micro-Structural Characterization of Newly Developed Laminated Hybrid Composite. Journal of Industrial Technology. ISSN 08826404

Al-Kayiem, Hussain H. and Al-Ambari, A.S.S (2007) Flow Analysis in Spiked Supersonic Intakes of A/C (I - Inviscid). In: Conference on Aerospace Technology of XXI Century, 20-21 June 2007, Kuala Lumpur.

Aris, M. Shiraz and Owen, ieuan and sutcliffe, c.j. (2007) The Application of Shape Memory Alloy as Longitudinal Vortex Generators for Enhanced Convective Heat Transfer. In: 10th UK Heat Transfer Conference, Edinburgh, Scotland..

Aris, M. Shiraz and owen, ieuan and sutcliffe, c.j. (2007) The Application of Shape Memory Alloy as Vortex Generators and Flow Control Devices for Enhanced Convective Heat Transfer. In: FEDSM2007 5th Joint ASME/JSME Fluids Engineering Conference, san Diego, Ca.

E

E. Woldemichael , Dereje and Mohd Hashim, Fakhruldin (2007) Development of Computer Aided Conceptual Design Tool for Sub-sea Process Equipment Design. In: Conference on Design, Simulation, Product Development and Optimization, Dec 2007, Penang, Malaysia .

F

Fong Woon, Lai and Abdul Karim, Z. A. and Johl, Satirenjit Kaur (2007) Examining a Successful Industrial Training Program Model: Inter-relationship Among the Three Main Stakeholders: Students, University and Host Companies. In: 2nd. Regional Conference on Engineering Education, 3-5 December 2007, Johor Bahru.

H

Hasan, Nurul (2007) CFD modelling of heat transfer in supersonic nozzles for magnesium production. [Citation Index Journal]

J

Jaafar, A and Escudier, Marcel and Poole, Robert (2007) Steady shear, small amplitude oscillatory shear and capillary break-up extensional rheology measurements of rod-like polymers. In: 4th Annual European Rheology Conference, 2007, Italy.

Japper-Jaafar, Azuraien and Escudier, Marcel and Poole, Robert (2007) Steady shear, small amplitude oscillatory shear and capillary break-up extensional rheology measurements of rod-like polymers. In: 4th Annual European Rheology Conference, 2007, Italy.

Junejo, Hasan Fawad (2007) The mechanical effects of deposition patterns in welding-based layered manufacturing. Proc. IMechE Vol. 221 Part B: J. Engineering Manufacture.

K

K., Fuad and R.A., Siregar and M., Daimaruya (2007) Dynamic splitting-tensile test and numerical analysis for brittle materials. In: SOLID STATE SCIENCE AND TECHNOLOGY: 2nd International Conference on Solid State Science and Technology 2006, ICSSST 2006, 4 September 2006 through 6 September 2006, Kuala Terengganu.

Karuppanan, S and Hills, D (2007) Stress intensity factor for a crack within a strip under arbitrary loading. J. Strain Analysis , 42. pp. 39-45.

Karuppanan , S and Dini, D and Hills, D (2007) Fretting fatigue test analysis of contacts. Fatigue Fracture Engineering Materials Structure, 30 (6). pp. 499-509.

Khan, Muhammad and Cooper, Dennis and Starr, Andrew (2007) Academic and commercial efforts in Wear Debris Analysis Automation (WDAA). Academic and commercial efforts in Wear Debris Analysis Automation (WDAA) .

L

Lin, R. J. T. and Mohd Sufian, S. S. and Abdullah , Mohamad Zaki and Bhattacharyya, Debes (2007) Processing and characterisation of PE/PET microfibrillar composites. In: 15th International Conference on Composites or Nano Engineering (ICCE-15), July 15-21, 2007, Haikou, Hainan Island, China.

M

M., Syaifuddin and B.D., Le and T.T., Truong and H.T., Ngo and N.S., Mohd and C.W., Lee (2007) Designing 8 degrees of freedom humanoid robotic arm. In: 2007 International Conference on Intelligent and Advanced Systems, ICIAS 2007, 25 November 2007 through 28 November 2007, Kuala Lumpur.

Megat-Yusoff, P.S.M. and Ahmad, Faiz and Amir, Norlaili and Leong, S.F. (2007) Effect of Particle Dispersion on Thermal Conductivity of Copper Powder Filled Epoxy Composites. International Conference on Advancement of Materials and Nanotechnology . UPENA, UiTM, Kuala Lumpur. ISBN 978-983-3644-95-7

P

P. Pancakarsa, Kresnajaya and Mohd Hashim , Fakhruldin (2007) Design of an Intelligent PIG for Deepwater Pipeline Maintenance. In: Conference on Application and Design in Mechanical Engineering (CADME), 25 – 26 Oct. 2007, Universiti Malaysia Perlis (UniMAP).

S

S, Jebaraj and S, Iniyan (2007) An Optimal Electricity Allocation Model for the Effective Utilisation of Energy Sources in India with Focus on Carbon Tax. In: Proceedings of ISES World Congress 2007.

S, Jebaraj and S, Iniyan and H, Kota (2007) Forecasting of commercial energy consumption in India using Artificial Neural Network. International Journal of Global Energy Issues, 27 (3).

S, Jebaraj and S, Iniyan and L, Suganthi and AA, Samuel (2007) Energy Models for Renewable Energy Utilization and To Replace fossil fuels. Proceedings of the 5th conference on energy conservation in Building, CIVILICA-Encyclopedia of Civil Engineering,.

Shazi, R. I. and Sulaiman, S. A. and Git, H. M. (2007) Inculcating Innovation to Universiti Teknologi PETRONAS’ Undergraduates through the Engineering Team Project (ETP) Course. In: Curtin University of Technology Sarawak Engineering Conference (CUTSE), November 2007, Miri, Sarawak.

Shehabuddeen, Kamaruddin and Mohd Hashim, Fakhruldin (2007) Recent Developments in Autonomous Underwater Vehicle (AUV) Control Systems. In: Proceedings of the 5th PetroMin Deepwater & Subsea and Underwater Technology Conference, 29 – 30 Oct 2007, Kuala Lumpur, Malaysia.

Sulaiman, S. A. and Abdul Karim, Z. A. and Said, M. A. M. and Shazi, R. I. and Lawes, M. (2007) Light Extinction Technique for Measurements of Droplets in a Quiescent Fuel-Air Aerosol Mixture. In: Curtin University of Technology Sarawak Engineering Conference (CUTSE), November 2007, Miri, Sarawak.

Sulaiman, S. A. and Lawes, M. (2007) Burning Rate and Regimes of Spherically Propagating Laminar Flames of Iso-Octane-Air Aerosol Mixtures. In: 6th Asia-Pacifc Conference on Combustion, May 2007, Nagoya, Japan.

Sulaiman, S. A. and Lawes, M. and Hassan, S. and Abdul Karim, Z. A. (2007) High-Speed Schlieren Imaging of Spherically Propagating Laminar Flames of Iso-Octane-Air Aerosol Mixtures. In: 3rd World Engineering Congress, Penang, August 2007, Penang, Malaysia.

s, Jebaraj and S, Iniyan (2007) An optimal energy allocation model using fuzzy linear programming for energy planning in India for the year 2020. International Journal of Energy Technology and Policy, 5 (4).

W

Wahab, A.A. (2007) 3D Analysis of Creep Void Formation in Steam-Methane Reformer Tubes. PhD. thesis, University of Canterbury, New Zealand.

Wahab, A.A. and Kral, M.V. (2007) A three dimensional view of high temperature creep damage. Materials at High Temperatures, 24 (4). pp. 299-302. ISSN ISSN 0960-3409