Items where Department / MOR is "Electrical & Electronic Engineering" and Year is 2017

AL-Qutami, T.A. and Ibrahim, R. and Ismail, I. and Ishak, M.A. (2017) Development of soft sensor to estimate multiphase flow rates using neural networks and early stopping. International Journal on Smart Sensing and Intelligent Systems, 10 (1). pp. 199-222.

AL-Qutami, T.A. and Ibrahim, R. and Ismail, I. and Ishak, M.A. (2017) Radial basis function network to predict gas flow rate in multiphase flow. ACM International Conference Proceeding Series, Part F. pp. 141-146.

Abdalla, I. and Zainal, E.Z.A. and Ramlan, N.A. and Firmansyah and Aziz, A.R.A. and Heikal, M. (2017) Free piston linear generator for low grid power generation. MATEC Web of Conferences, 131.

Abdalla, I.I. and Ibrahim, T. and Mohd Nor, N.B. (2017) The fabrication and characterization of short-stroke tubular linear permanent-magnet motor. Lecture Notes in Electrical Engineering, 398. pp. 777-789.

Abdalla, I.I. and Ibrahim, T. and Nor, N.M. and Perumal, N. (2017) Optimal design of a single-slotted permanent-magnet linear generator for wave energy conversion. International Journal of Applied Electromagnetics and Mechanics, 56 (1). pp. 21-34.

Abdalla, I.I. and Ibrahim, T. and Perumal, N. and Nor, N.M. (2017) Minimization of eddy-current loss in a permanent-magnet tubular linear motor. International Journal on Advanced Science, Engineering and Information Technology, 7 (3). pp. 964-970.

Abdalla, I.I. and Zainal, A.E.Z. and Ramlan, N.A. and Firmansyah, Firmansyah and Aziz, A.R.A. and Heikal, M.R. (2017) Cogging force investigation of a free piston permanent magnet linear generator. IOP Conference Series: Materials Science and Engineering, 257 (1).

Abdalsalam, E. and Yusoff, M.Z. and Kamel, N. and Malik, A.S. and Mahmoud, D. (2017) Classification of four class motor imagery for brain computer interface. Lecture Notes in Electrical Engineering, 398. pp. 297-305.

Abdelrasoul, Y. and Saman, A.B.S.H. and Sebastian, P. (2017) A quantitative study of tuning ROS gmapping parameters and their effect on performing indoor 2D SLAM. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016.

Abdullah, H. and Ibrahim, R. and Hassan, S.M. and Chung, T.D. (2017) Filtered feedback PID control for WirelessHART networked plant. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Addi, M.M. and Abidin, N.A.Z. and Daud, S.A. (2017) Development of a portable phototherapy garment (PPG) for jaundice treatment. IECBES 2016 - IEEE-EMBS Conference on Biomedical Engineering and Sciences. pp. 405-410.

Ahmed, K.Y. and Yahaya, N.Z. and Asirvadam, V.S. and Ramani, K. and Shannan, N.M. (2017) Modeling of steady state and transient state of the power electronic distribution transformer. Lecture Notes in Electrical Engineering, 398. pp. 807-817.

Ajam, A. and Aziz, A.A. and Asirvadam, V.S. and Muda, A.S. and Faye, I. and Safdar Gardezi, S.J. (2017) A Review on Segmentation and Modeling of Cerebral Vasculature for Surgical Planning. IEEE Access, 5. pp. 15222-15240.

Al-Shargie, F. and Tang, T.B. and Kiguchi, M. (2017) Assessment of mental stress effects on prefrontal cortical activities using canonical correlation analysis: An fNIRS-EEG study. Biomedical Optics Express, 8 (5). pp. 2583-2598.

Ali, A. and Mohd Nor, N. and Ibrahim, T. and Fakhizan Romlie, M. (2017) Sizing and placement of battery-coupled distributed photovoltaic generations. Journal of Renewable and Sustainable Energy, 9 (5).

Ali, E.M. and Yahaya, N.Z. and Perumal, N. and Zakariya, M.A. (2017) Design of microstrip patch antenna at 900 MHz for charging mobile applications. Journal of Engineering and Applied Sciences, 12 (4). pp. 988-993.

Ali, S.S.A. and Kannan, R. and Kumar, M.S. (2017) Exploration of Modulation Index in Multi-level Inverter using Particle Swarm Optimization Algorithm. Procedia Computer Science, 105. pp. 144-152.

Altahir, A.A. and Asirvadam, V.S. and Hamid, N.H.B. and Sebastian, P. (2017) Camera coverage prioritization to support security monitoring. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Altahir, A.A. and Asirvadam, V.S. and Hamid, N.H.B. and Sebastian, P. and Saad, N.B. and Ibrahim, R.B. and Dass, S.C. (2017) Optimizing Visual Surveillance Sensor Coverage Using Dynamic Programming. IEEE Sensors Journal, 17 (11). pp. 3398-3405.

Andarany, K.S. and Sagir, A. and Ahmad, A. and Deni, S.K. and Gunawan, W. (2017) Cellulose acetate layer effect toward aluminium corrosion rate in hydrochloric acid media. IOP Conference Series: Materials Science and Engineering, 237 (1).

Anwer, A. and Azhar Ali, S.S. and Khan, A. and Meriaudeau, F. (2017) Underwater 3-D Scene Reconstruction Using Kinect v2 Based on Physical Models for Refraction and Time of Flight Correction. IEEE Access, 5. pp. 15960-15970.

Awais, M. and Badruddin, N. and Drieberg, M. (2017) A hybrid approach to detect driver drowsiness utilizing physiological signals to improve system performance and Wearability. Sensors (Switzerland), 17 (9).

Awang, A. and Husain, K. and Kamel, N. and Aissa, S. (2017) Routing in Vehicular Ad-hoc Networks: A Survey on Single- and Cross-Layer Design Techniques, and Perspectives. IEEE Access, 5. pp. 9497-9517.

Bahloul, M.R. and Yusoff, M.Z. and Abdel, A.-H. and Naufal, M.M.S. and Kudsi, L. (2017) Spectrum sensing for cognitive radio systems using modulation classification: A review. Applied Mathematics and Information Sciences, 11 (3). pp. 857-865.

Basha, I.H.K. and Hamid, N.H. and Yousuff, C.M. and Ho, E.T.W. (2017) Irreversible electroporation of multiple blood cells in continuous flow microfluidic device-A theoretical study. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Chung, T.D. and Hassan, S.M. (2017) Optimal PID control of pH neutralization plant. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016.

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Hassan, S.M. (2017) Fractional-order filter design for set-point weighted PID controlled unstable systems. International Journal of Mechanical and Mechatronics Engineering, 17 (5). pp. 173-179.

Chee, L.H. and Kumar, P. and Kang, C.H. and Burhanudin, Z.A. (2017) DNA/AuNP-graphene back-gated field effect transistor as a biosensor for lead (II) ion detection. Proceedings of the 2017 IEEE Regional Symposium on Micro and Nanoelectronics, RSM 2017. pp. 127-130.

Chee, P.S. and Elamvazuthi, I. and Izhar, L.I. and Tageldeen, M.K. and Capi, G. (2017) Robotics rehabilitation for assessment of activities of daily living (ADL). 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016.

Chien, L.J. and Drieberg, M. and Sebastian, P. and Hiung, L.H. (2017) A simple solar energy harvester for wireless sensor networks. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Chughtai, O. and Badruddin, N. and Awang, A. (2017) A node/link level congestion detection approach in low power and limited broadcast range wireless ad hoc networks. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Chughtai, O. and Badruddin, N. and Awang, A. (2017) A novel congestion alleviation procedure in multi-hop wireless sensor networks. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Chung, T.D. and Ibrahim, R. and Asirvadam, V.S. and Saad, N. and Hassan, S.M. (2017) Effect of network induced delays on WirelessHART control system. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Chung, T.D. and Ibrahim, R. and Asirvadam, V.S. and Saad, N. and Hassan, S.M. (2017) Energy Consumption Analysis of WirelessHART Adaptor for Industrial Wireless Sensor Actuator Network. Procedia Computer Science, 105. pp. 227-234.

Chung, T.D. and Ibrahim, R. and Asirvadam, V.S. and Saad, N. and Hassan, S.M. (2017) Latency analysis of WirelessHART control message with variable payload. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016.

Chung, T.D. and Ibrahim, R. and Hassan, S.M. and Rosli, N.S. (2017) Fast approach for automatic data retrieval using R programming language. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016.

Dang Huu, T. and Ismail, I.B. (2017) Modelling of Twin Rotor MIMO system. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016.

Egambaram, A. and Badruddin, N. and Asirvadam, V.S. and Begum, T. (2017) Comparison of envelope interpolation techniques in Empirical Mode Decomposition (EMD) for eyeblink artifact removal from EEG. IECBES 2016 - IEEE-EMBS Conference on Biomedical Engineering and Sciences. pp. 590-595.

Elangovan, D. and Arunkumar, G. and Indragandhi, V. and Venkatesh, S. and Kannan, R. (2017) Design and analysis of flyback micro inverter for integration of fuel cells with single phase grid. International Journal of Mechanical Engineering and Technology, 8 (11). pp. 204-219.

Elangovan, D. and Arunkumar, G. and Indragandhi, V. and Venkatesh, S. and Kannan, R. (2017) Design and analysis of flyback micro inverter for integration of fuel cells with single phase grid. International Journal of Mechanical Engineering and Technology, 8 (11). pp. 220-228.

Essam, M. and Tang, T.B. and Ho, E.T.W. and Chen, H. (2017) Dynamic point stochastic rounding algorithm for limited precision arithmetic in Deep Belief Network training. International IEEE/EMBS Conference on Neural Engineering, NER. pp. 629-632.

Gandhamal, A. and Talbar, S. and Gajre, S. and Razak, R. and Hani, A.F.M. and Kumar, D. (2017) Fully automated subchondral bone segmentation from knee MR images: Data from the Osteoarthritis Initiative. Computers in Biology and Medicine, 88. pp. 110-125.

Ganesan, T. and Elamvazuthi, I. (2017) A multi-objective approach for resilience-based plant design optimization. Quality Engineering, 29 (4). pp. 656-671.

Ghalehkhani, P. and Parasuraman, S. and Khan, M.K.A.A. and Elamvazuthi, I. and Debnath, N. and Ali, S.S.A. (2017) Forearm pressure distribution during ambulation with elbow crutches. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016.

Gilani, S.F.-U.-H. and Khir, M.H.B.M. and Ibrahim, R. and Kirmani, E.U.H. and Gilani, S.I.-U.-H. (2017) Modelling and development of a vibration-based electromagnetic energy harvester for industrial centrifugal pump application. Microelectronics Journal, 66. pp. 103-111.

Haizad, M. and Ibrahim, R. and Adnan, A. and Chung, T.D. and Hassan, S.M. (2017) Development of low-cost real-time data acquisition system for process automation and control. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016.

Halim, A.H. and Ismail, I. (2017) Online PID controller tuning using tree physiology optimization. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Halim, A.H. and Ismail, I. (2017) Single and Multiple variables control using Tree Physiology Optimization. MATEC Web of Conferences, 131.

Halim, A.H. and Ismail, I. (2017) Tree Physiology Optimization tuning rule for Proportional-Integral control. MATEC Web of Conferences, 131.

Hanouneh, S. and Amin, H.U. and Saad, N.M. and Malik, A.S. (2017) The correlation between EEG asymmetry and memory performance during semantic memory recall. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Harsoori, M.M. and Zulkifli, T.Z.A. (2017) 60 GHz microstrip filter in 0.13μm RF CMOS technology. Proceedings - 14th IEEE Student Conference on Research and Development: Advancing Technology for Humanity, SCOReD 2016.

Hasan, E. and Bin Ibrahim, R. and Ali, S.S.A. and Miya, H.S. and Gilani, S.F. (2017) U-Model based online identification of Air Flow Plant. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016.

Hasan, E. and Ibrahim, R.B. and Ali, S.S.A. and Bingi, K. and Gilani, S.F. (2017) U-Model Based Adaptive Control of Gas Process Plant. Procedia Computer Science, 105. pp. 119-124.

Hassan, S.M. and Ibrahim, R. and Bingi, K. and Chung, T.D. and Saad, N. (2017) Application of Wireless Technology for Control: A WirelessHART Perspective. Procedia Computer Science, 105. pp. 240-247.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Asirvadam, V.S. and Chung, T.D. (2017) Implementation of real-time WirelessHART network for control application. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Asirvadam, V.S. and Chung, T.D. (2017) Predictive PI controller for wireless control system with variable network delay and disturbance. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Asirvadam, V.S. and Chung, T.D. (2017) A filtered predictive PI controller for wirelessHART networked control system. Control Engineering and Applied Informatics, 19 (4). pp. 13-24.

Hooi, L.Y. and Hiung, L.H. and Drieberg, M. and Sebastian, P. (2017) Configurable 2 bits per cycle successive approximation register for analog to digital converter on FPGA. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Husain, K. and Awang, A. (2017) A receiver-based forwarding scheme to minimize multipath formation in VANET. Advances in Intelligent Systems and Computing, 548. pp. 15-26.

Husain, K. and Awang, A.B. and Kamel, N. (2017) Receiver-based data forwarding in vehicular ad hoc networks. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Hussain, N. and Karsiti, M.N. and Yahya, N. and Jeoti, V. and Yahya, N. (2017) 2D wavelets Galerkin method for the computation of em field on seafloor excited by a point source. International Journal of Applied Electromagnetics and Mechanics, 53 (4). pp. 631-644.

Ibrahim, O. and Yahaya, N.Z. and Saad, N. (2017) Comparative studies of PID controller tuning methods on a DC-DC boost converter. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Ibrahim, O. and Yahaya, N.Z. and Saad, N. and Ahmed, K.Y. (2017) Design and simulation of phase-shifted full bridge converter for hybrid energy systems. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Ibrahim, O. and Yahaya, N.Z. and Saad, N. and Ahmed, K.Y. (2017) Development of Observer State Output Feedback for Phase-Shifted Full Bridge DC-DC Converter Control. IEEE Access, 5. pp. 18143-18154.

Ibrahim, R. and Gilani, S.F.U.H. and Jamil, A. and Yusoff, M.Z. (2017) Design and analysis of an RF rectifying circuit upon integration with monopole and Fractal antennas. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. (2017) Condition monitoring of induction motors via instantaneous power analysis. Journal of Intelligent Manufacturing, 28 (6). pp. 1259-1267.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Magzoub, M. (2017) An Online Fault Diagnosis System for Induction Motors via Instantaneous Power Analysis. Tribology Transactions, 60 (4). pp. 592-604.

Ismail, I. and Halim, A.H. (2017) Comparative study of meta-heuristics optimization algorithm using benchmark function. International Journal of Electrical and Computer Engineering, 7 (3). pp. 1643-1650.

Izhar, L.I. and Elamvazuthi, I. and Stathaki, T. and Howell, K. and Omar, Z. (2017) Multimodal image registration for potential diagnosis and monitoring of morphoea using a hybrid NGC method. Proceedings of 2016 1st International Conference on Biomedical Engineering: Empowering Biomedical Technology for Better Future, IBIOMED 2016.

Jagabar Sathik, M.A. and Abdel Aleem, S.H.E. and Kannan, R. and Zobaa, A.F. (2017) A New Switched DC-Link Capacitor-based Multi-level Converter (SDC2MLC). Electric Power Components and Systems, 45 (9). pp. 1001-1015.

Jamali, A.A. and Nor, N.M. and Ibrahim, T. and Romlie, M.F. (2017) An analytical approach for the sizing and siting of battery-sourced inverters in distribution networks. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Jee Chen Hung, C. and Perumal, N. and Elamvazuthi, I. and Tageldeen, M.K. and Khan, M.K.A.A. and Parasuraman, S. (2017) Home-based interactive rehabilitation system for hand. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016.

Kajo, I. and Malik, A.S. and Kamel, N. (2017) An evaluation of optical flow algorithms for crowd analytics in surveillance system. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Kamble, R. and Kokare, M. and Deshmukh, G. and Hussin, F.A. and Mériaudeau, F. (2017) Localization of optic disc and fovea in retinal images using intensity based line scanning analysis. Computers in Biology and Medicine, 87. pp. 382-396.

Kang, C.H. and Burhanudin, Z.A. and Saheed, M.S.M. and Mohamed, N.M. (2017) Synthesis parameters and transfer techniques of mono-few layer graphene for transparent conductive electrode. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Kang, C.H. and Obama, M.P.E.M. and Saheed, M.S.M. and Mohamed, N.M. and Burhanudin, Z.A. (2017) Facile formation of interconnected multi-walled carbon nanotube-graphene nanocomposite for nanoelectronics applications. Key Engineering Materials, 744. pp. 433-437.

Kannan, R. and Aizuddin, M. and Romlie, M.F. (2017) Design and implementation of material characteristics for capacitive coupling wireless power transfer system. International Journal of Applied Engineering Research, 12 (5). pp. 797-803.

Kannan, R. and Aleem, S.H.E.A. and Zobaa, A.F. and Monem, A.M.A. (2017) Optimal multiple-steps single-tuned harmonic filters under time-varying conditions. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Kannan, R. and Angamuthu, R. and Ahmed, K.Y. (2017) Photo energy conversion using synchronous sequential circuit based diode clamp multilevel inverter. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Kannan, R. and Lokesh, N. and Hasan, K.N.M. and Aravind, C.V. (2017) Implementation of one cycle controller for single phase bi-directional converter. International Journal of Applied Engineering Research, 12 (6). pp. 804-812.

Karia, S. and Parasuraman, S. and Khan, M.K.A.A. and Elamvazuthi, I. and Debnath, N. and Ali, S.S.A. (2017) Plantar pressure distribution and gait stability: Normal VS high heel. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016.

Khan, A.M. and Jeoti, V. and Rehman, M. and Jilani, M. (2017) Noise power estimation for broadcasting OFDM systems. Canadian Conference on Electrical and Computer Engineering.

Khan, A.M. and Jeoti, V. and Rehman, M.Z.Ur. and Jilani, M.T. and Zakariya, M.A. (2017) A cyclic correlation-based time domain channel estimation scheme. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Khanh, D.V.K. and Vasant, P.M. and Elamvazuthi, I. and Dieu, V.N. (2017) Geometric optimisation of thermo-electric coolers using simulated annealing. International Journal of Computational Science and Engineering, 14 (3). pp. 279-289.

Latief, M. and Khorsidtalab, A. and Saputra, I. and Akmeliawati, R. and Nurashikin, A. and Jaswir, I. and Witjaksono, G. (2017) Rapid lard identification with portable electronic nose. IOP Conference Series: Materials Science and Engineering, 260 (1).

Lawal, B. and Ali, S.S.A. and Awang, A.B. (2017) Massive MIMO systems for underwater acoustic communication. USYS 2016 - 2016 IEEE 6th International Conference on Underwater System Technology: Theory and Applications. pp. 159-164.

Lim, L.G. and Tang, T.B. (2017) Design of concave capacitance sensor for void fraction measurement in gas-liquid flow. Proceedings of 2016 8th International Conference on Information Technology and Electrical Engineering: Empowering Technology for Better Future, ICITEE 2016.

Magzoub, M. and Saad, N. and Ibrahim, R. and Irfan, M. (2017) A genetic algorithm optimization of hybrid fuzzy-fuzzy rules in induction motor control. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Mahesh, K. and Nallagownden, P. and Elamvazuthi, I. (2017) Multi-objective PSO based optimal placement of solar power DG in radial distribution system. Journal of Electrical Systems, 13 (2). pp. 322-331.

Mahesh, K. and Nallagownden, P. and Elamvazuthi, I. (2017) Optimal placement and sizing of distributed generators for voltage-dependent load model in radial distribution system. Renewable Energy Focus, 19-20. pp. 23-37.

Mahesh, K. and Nallagownden, P. and Elamvazuthi, I. (2017) Optimal placement and sizing of renewable distributed generations and capacitor banks into radial distribution systems. Energies, 10 (6).

Malik, A.F. and Jeoti, V. and Fawzy, M. and Iqbal, A. and Aslam, Z. and Pandian, M.S. and Marigo, E. (2017) Estimation of SAW velocity and coupling coefficient in multilayered piezo-substrates AlN/SiO2/Si. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Mathulamuthu, S.S. and Asirvadam, V.S. and Dass, S.C. and Gill, B.S. (2017) Cluster based regression model on dengue incidence using dual climate variables. Proceedings - 2016 IEEE Conference on Systems, Process and Control, ICSPC 2016. pp. 64-69.

Mazher, M. and Aziz, A.A. and Malik, A.S. (2017) Evaluation of rehearsal effects of multimedia content based on EEG using machine learning algorithms. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Mazlan, M.A.A.A. and Khir, M.H.M. and Saad, N.M. and Dass, S.C. (2017) Wifi fingerprinting indoor positioning with multiple access points in a single base station using probabilistic method. International Journal of Applied Engineering Research, 12 (6). p. 1102.

Md Hasan, K.N. and Khai, T.X. and Kannan, R. and Zakaria, Z.A. (2017) Harnessing 'Blue energy': A Review on Techniques and Preliminary Analysis. MATEC Web of Conferences, 131.

Memon, A.H. and Bin Ibrahim, T. and Nallagowden, P. (2017) Design analysis, optimization and identification of optimum single-phase linear PM generator using different magnet shape for wave energy conversion. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Memon, A.H. and Ibrahim, T.B. and Nallagoowden, P. (2017) Design development and modelling of linear permanent magnet generator topologies for wave energy conversion. International Journal of Applied Engineering Research, 12 (12). pp. 3329-3336.

Mkayes, A.A. and Saad, N.M. and Faye, I. and Walter, N. (2017) Image histogram and FFT based critical study on noise in fluorescence microscope images. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Mohamed Yousuff, C. and B Hamid, N.H. and Kamal Basha, I.H. and Wei Ho, E.T. (2017) Output channel design for collecting closely-spaced particle streams from spiral inertial separation devices. AIP Advances, 7 (8).

Mohamed Zain, I.F. and Awang, A. and Laouiti, A. (2017) Hybrid MAC protocols in VANET: A survey. Advances in Intelligent Systems and Computing, 548. pp. 1-14.

Mousa Ali, E. and Yahaya, N.Z. and Nallagownden, P. and Zakariya, M.A. (2017) A novel rectifying circuit for microwave power harvesting system. International Journal of RF and Microwave Computer-Aided Engineering, 27 (4).

Muzammel, M. and Yusoff, M.Z. and Meriaudeau, F. (2017) Rear-end vision-based collision detection system for motorcyclists. Journal of Electronic Imaging, 26 (3).

Nallagowden, P. and Varma, R. and Memonn, A.H. (2017) Performance improvement of synchronous permanent magnet generator for oscillating water column (OWC) wave energy converter. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding. pp. 792-796.

Nallagownden, P. and Mahesh, K. and Elamvazuthi, I. (2017) A combined-model for uncertain load and optimal configuration of distributed generation in power distribution system. International Journal of Simulation: Systems, Science and Technology, 17 (41). 11.1-11.7.

Nor, N.M. and Zemri, N.S. and Daud, S.A. and Ibrahim, T. and Daud, H. (2017) Development of an automated three-phase distribution box system. Indonesian Journal of Electrical Engineering and Computer Science, 6 (2). pp. 233-240.

Nurhanim, K. and Elamvazuthi, I. and Izhar, L.I. (2017) Effect of muscle activities on gait for the lower extremities. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Nurhanim, K. and Elamvazuthi, I. and Izhar, L.I. and Ganesan, T. and Su, S.W. (2017) Development of a model for sEMG based joint-torque estimation using Swarm techniques. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016.

Parimi, A.M. and Elamvazuthi, I. and Kumar, A.V.P. and Cherian, V. (2017) Fuzzy logic based control for IPFC for damping low frequency oscillations in multimachine power system. Proceedings - 2015 IEEE IAS Joint Industrial and Commercial Power Systems / Petroleum and Chemical Industry Conference, ICPSPCIC 2015. pp. 32-36.

Rahman, Z.H.A. and Khir, M.H.Md. and Burhanudin, Z.A. (2017) Modeling and simulation analysis of micro thermoelectric generator. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Rameshkumar, K. and Indragandhi, V. and Palanisamy, K. and Kannan, R. (2017) A novel current control technique for photo voltaic integrated single phase shunt active power filter. International Journal of Renewable Energy Research, 7 (4). pp. 1710-1722.

Rasheed, W. and Tang, T.B. and Hamid, N.H. (2017) Threshold for computing generalized model of default mode network connectivity. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Rashid, R. and Perumal, N. and Elamvazuthi, I. and Tageldeen, M.K. and Khan, M.K.A.A. and Parasuraman, S. (2017) Mobile robot path planning using Ant Colony Optimization. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016.

Rasool, F. and Drieberg, M. and Badruddin, N. and Singh, B. and Singh, M. (2017) Modeling of PV panels performance based on datasheet values for solar micro energy harvesting. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Rathinam, A. and Karthikeyan, T. and Ramani, K. (2017) Electric vehicle by using modified topology of multilevel inverter. International Journal of Vehicle Structures and Systems, 9 (1). pp. 47-52.

Rehman, M. and Baharudin, Z. and Nallagownden, P. and Islam, B. (2017) Modelling and efficiency-analysis of wireless power transfer using magnetic resonance coupling. Indonesian Journal of Electrical Engineering and Computer Science, 6 (3). pp. 563-571.

Rehman, M.Z.U. and Baharudin, Z. and Zakariya, M.A. and Khir, M.H.M. (2017) Development of 7 GHz bowtie shaped substrate integrated waveguide bandpass filter with emphasis on inter-resonator coupling. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Riman, N.I.S. and Abdullah, M.F. and Romlie, M.F. and Baharudin, Z. (2017) The third harmonic current contribution during three-phase to ground fault. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Rosli, N. and Ibrahim, R. and Ismail, I. and Hassan, S.M. and Chung, T.D. (2017) Neural network architecture selection for efficient prediction model of gas metering system. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016.

Rosli, N.S. and Ibrahim, R. and Ismail, I. (2017) Intelligent Prediction System for Gas Metering System using Particle Swarm Optimization in Training Neural Network. Procedia Computer Science, 105. pp. 165-169.

Rosli, N.S. and Ibrahim, R. and Ismail, I. (2017) Neural network model with particle swarm optimization for prediction in gas metering systems. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Saeidi, T. and Bin Ismail, I. and Zakariya, M.A. and Alhawari, A.R.H. (2017) Harmonic control of triple-band microstrip antenna using photonic band gap approach. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Saman, A.B.S.H.M. and Lotfy, A.H. (2017) An implementation of SLAM with extended Kalman filter. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Sattar, S. and Zulkifli, T.Z.A. (2017) A 2.4/5.2-GHz Concurrent Dual-Band CMOS Low Noise Amplifier. IEEE Access, 5. pp. 21148-21156.

Sebastian, P. and Voon, Y.V. and Comley, R. (2017) Parametric tracking across multiple cameras. Pertanika Journal of Science and Technology, 25 (S). pp. 159-168.

Senivasan, S. and Drieberg, M. and Singh, B.S.M. and Sebastian, P. and Hiung, L.H. (2017) An MPPT micro solar energy harvester for wireless sensor networks. Proceedings - 2017 IEEE 13th International Colloquium on Signal Processing and its Applications, CSPA 2017. pp. 159-163.

Sethi, M.A.J. and Hussin, F.A. and Hamid, N.H. (2017) Bio-inspired fault tolerant network on chip. Integration, the VLSI Journal, 58. pp. 155-166.

Sethi, M.A.J. and Hussin, F.A. and Hamid, N.H. (2017) Biologically inspired network on chip fault tolerant algorithm using time division multiplexing. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Shahabudin, N. and Ibrahim, T. and Zamri, N.A.M. (2017) Portable pico linear generator design with different magnet shapes for wave energy conversion system. International Journal of Power Electronics and Drive Systems, 8 (1). pp. 360-366.

Shaheen, A.-U.-R. and Hussin, F.A. and Hamid, N.H. (2017) False path identification algorithm framework for nonseparable controller-data path circuits. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Shannan, N.M. and Yahaya, N.Z. and Singha, B. and Salam, Z. and Ahmed, K.Y. (2017) Theoretical analysis of the series parasitic resistance in photovoltaic cell. 2017 IEEE 8th Control and System Graduate Research Colloquium, ICSGRC 2017 - Proceedings. pp. 73-76.

Sheikh, M.A. and Nor, N.M. and Ibrahim, T. (2017) Effect of Unbalanced Voltage Supply Diagnosis Through Rotor Harmonics Signature and State Transitions. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding. pp. 546-551.

Sheikh, M.A. and Nor, N.M. and Ibrahim, T. and Bakhsh, S.T. and Irfan, M. and Saad, N.B. (2017) An intelligent automated method to diagnose and segregate induction motor faults. Journal of Electrical Systems, 13 (2). pp. 241-254.

Sheikh, M.A. and Nor, N.M. and Ibrahim, T. and Bin Hamdan, M.F. (2017) A new method for detection of unbalanced voltage supply through rotor harmonics and symbolic state dynamics. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Shoaib, M. and Hamid, N.H. and Tariq Jan, M. and Zain Ali, N.B. (2017) Effects of Crack Faults on the Dynamics of Piezoelectric Cantilever-Based MEMS Sensor. IEEE Sensors Journal, 17 (19). pp. 6279-6294.

Shuaibu, A.N. and Malik, A.S. and Faye, I. (2017) Behavior representation in visual crowd scenes using space-time features. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Shuaibu, A.N. and Malik, A.S. and Faye, I. and Ali, Y.S. (2017) Pedestrian group attributes detection in crowded scenes. Proceedings - 3rd International Conference on Advanced Technologies for Signal and Image Processing, ATSIP 2017.

Sidibé, D. and Sankar, S. and Lemaître, G. and Rastgoo, M. and Massich, J. and Cheung, C.Y. and Tan, G.S.W. and Milea, D. and Lamoureux, E. and Wong, T.Y. and Mériaudeau, F. (2017) An anomaly detection approach for the identification of DME patients using spectral domain optical coherence tomography images. Computer Methods and Programs in Biomedicine, 139. pp. 109-117.

Socheatra, S. and Wen, W.P. and Cheong, L.Y. (2017) Dual-band bandstop filter based on predistortion hybrid reflection function. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Soeung, S. and Wong, P.W. and Cheab, S. (2017) Highly selective lossy dual-band bandstop filter synthesis and design based on predistortion hybrid dual-band elliptic reflection function. Progress in Electromagnetics Research Letters, 66. pp. 15-23.

Sovann, N. and Nallagownden, P. and Baharudin, Z. (2017) Electricity load forecasting using hybrid wavelet neural network based on parallel prediction method. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Subhani, A.R. and Malik, A.S. and Kamil, N. and Naufal, M. and Saad, M. (2017) Using resting state coherence to distinguish between low and high stress groups. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Subhani, A.R. and Malik, A.S. and Kamil, N. and Saad, M.N.M. (2017) Difference in brain dynamics during arithmetic task performed in stress and control conditions. IECBES 2016 - IEEE-EMBS Conference on Biomedical Engineering and Sciences. pp. 695-698.

Subhani, A.R. and Mumtaz, W. and Saad, M.N.B.M. and Kamel, N. and Malik, A.S. (2017) Machine learning framework for the detection of mental stress at multiple levels. IEEE Access, 5. pp. 13545-13556.

Surendiran, S. and Thangavel, S. and Kannan, R. (2017) Optimization of PID controller parameters in interconnected power system using index curve based technique. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Tageldeen, M.K. and Elamvazuthi, I. and Perumal, N. and Ganesan, T. and Borboni, A. (2017) Development of a 3D virtual platform for an upper arm robotic exoskeleton. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016.

Tageldeen, M.K. and Perumal, N. and Elamvazuthi, I. and Ganesan, T. (2017) Design and control of an upper arm exoskeleton using Fuzzy logic techniques. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016.

Umar, M.W. and Yahaya, N.B. and Baharuddin, Z.B. (2017) Design and simulation of DC-DC converter for automobile LED front lighting applications. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Witjaksono, G. and Hussin, N.H.F.B.M. and Rabih, A.A.S. and Alfa, S. (2017) Real time chromametry measurement for food quality detection using mobile device. IOP Conference Series: Materials Science and Engineering, 237 (1).

Witjaksono, G. and Saputra, I. and Latief, M. and Jaswir, I. and Akmeliawati, R. and Abdelkreem Saeed Rabih, A. (2017) Non-Halal biomarkers identification based on Fourier Transform Infrared Spectroscopy (FTIR) and Gas Chromatography-Time of Flight Mass Spectroscopy (GC-TOF MS) techniques. EPJ Web of Conferences, 162.

Yaro, A.S. and Sha’Ameri, A.Z. and Kamel, N. (2017) Ground receiving station reference pair selection technique for a minimum configuration 3D emitter position estimation multilateration system. Advances in Electrical and Electronic Engineering, 15 (3). pp. 391-399.

Yong, P.K. and Ho, E.T.W. (2017) Streaming brain and physiological signal acquisition system for IoT neuroscience application. IECBES 2016 - IEEE-EMBS Conference on Biomedical Engineering and Sciences. pp. 752-757.

Yousuff, C.M. and Hamid, N.H.B. and Hussain, K.I. and Ho, E.T.W. (2017) Numerical modelling and simulation of dielectrophoretic based WBC sorting using sidewall electrodes. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Zafar, R. and Dass, S.C. and Malik, A.S. (2017) Electroencephalogram-based decoding cognitive states using convolutional neural network and likelihood ratio based score fusion. PLoS ONE, 12 (5).

Zafar, R. and Dass, S.C. and Malik, A.S. and Kamel, N. and Rehman, M.J.U. and Ahmad, R.F. and Abdullah, J.M. and Reza, F. (2017) Prediction of Human Brain Activity Using Likelihood Ratio Based Score Fusion. IEEE Access, 5. pp. 13010-13019.

Zahari, M.K. and Ahmad, B.H. and Wen, W.P. and Shairi, N.A. (2017) Switchable absorptive bandstop to bandpass filter using stepped-impedance dual mode resonator. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2-13). pp. 17-21.

Zahari, M.K. and Ahmad, B.H. and Wen, W.P. and Shairi, N.A. and Mutalib, M.A. and Hassan, N. (2017) An investigation of switchable matched bandstop to bandpass filter based on lossy resonator. Journal of Telecommunication, Electronic and Computer Engineering, 9 (1-5). pp. 119-123.

Zaidi, K.S. and Jeoti, V. and Awang, A. and Drieberg, M. (2017) High reliability using virtual MIMO based mesh network for maritime wireless communication. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Zainol, M.Z. and Romlie, M.F. and Jalil, M.R.A. and Yahaya, N.Z. and Zainol, I. and Ghani, M.F. and Jasri, M.A.H.M. (2017) Design and analysis of a contactless battery charger with planar PCB windings. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Zakaria, Z.A. and Yaacob, A. and Mokri, K.N. and Hanaffi, M.S. and Zainol, M.Z. and Ganesan, L. and Ishak, M.F. and Majid, M.A. and Hasan, K.N.M. (2017) Development of cost effective Ultrasonic Testing thickness measurement specimens and basic laboratory guidelines for UniKL MIMET. ARPN Journal of Engineering and Applied Sciences, 12 (6). pp. 1961-1967.

Zakariya, M.A. and Ali, S.M. and Baharudin, Z. and Rehman, M.Z.U. and Abdullah, S.M.C. and Khan, A.M. and Khan, M.T. (2017) Investigation of DGS CDRA for high gain applications. Lecture Notes in Electrical Engineering, 398. pp. 571-580.

Zamri, N.A.M. and Ibrahim, T. and Nor, N.M. (2017) Design and modelling of generator for wave energy conversion system in Malaysia. International Journal of Simulation: Systems, Science and Technology, 17 (41). 23.1-23.6.

Zamri, N.A.M. and Ibrahim, T. and Nor, N.M. (2017) Direct drive linear generator designs with aluminium spacer and alternate slot winding for wave energy conversion system. International Journal on Advanced Science, Engineering and Information Technology, 7 (4). pp. 1282-1288.

Zamri, N.A.M. and Ibrahim, T. and Nor, N.M. (2017) Optimization of linear generator designs for wave energy converter (WEC) system in Malaysia. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Zee, E. and Wong, P.W. (2017) Design and synthesis of dual-band microwave bandpass filter based on hybrid polynomials. Progress In Electromagnetics Research C, 72. pp. 141-149.

Zulkarnain, N.F. and Ibrahim, T. and Romlie, M.F. (2017) Analysis of radial and halbach permanent magnet configurations for ceiling fan applications. International Journal of Simulation: Systems, Science and Technology, 17 (41). 22.1-22.6.

Zulkarnain, N.F. and Ibrahim, T. and Romlie, M.F. (2017) Design and optimization of permanent magnet machine for ceiling fan. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

ul Islam, B. and Baharudin, Z. (2017) A meta-heuristics based input variable selection technique for hybrid electrical energy demand prediction models. International Journal of Simulation: Systems, Science and Technology, 17 (41). 4.1-4.5.