Items where Author is "Shukrullah, S."

Group by: Item Type | No Grouping

Number of items: 34.

Article

Hussain, Z. and Zuhra and Rukh, G. and Zada, A. and Naz, M.Y. and Khan, K.M. and Shukrullah, S. and Sulaiman, S.A. (2021) Construction of rechargeable bio-battery cells from electroactive antioxidants extracted from wasted vegetables. Cleaner Engineering and Technology, 5.

Naz, M.Y. and Shukrullah, S. and Noman, M. and Yaseen, M. and Naeem, M. and Sulaiman, S.A. (2021) Effect of Water-Mixed Polyvinyl Alcohol Viscosity on Wear Response of Carbon Steel Exposed to an Eroding Medium. Journal of Materials Engineering and Performance, 30 (3). pp. 2066-2073.

Khan, A. and Hussain, Z. and Hussain, K. and Naz, M.Y. and Jan, M.R. and Shukrullah, S. and Ullah, S. and Sulaiman, S.A. and Hussien, M. (2021) Evaluation of the catalytic activity of borax and its calcined derivatives for pyrolytic valorization of waste tire tube rubber for production of oil and gases. Reaction Kinetics, Mechanisms and Catalysis, 134 (2). pp. 883-901.

Naz, M.Y. and Bou-Rabee, M. and Shukrullah, S. and Ghaffar, A. and Gungor, A. and Sulaiman, S.A. (2021) A review of hybrid energy technologies tenets, controls and combinational strategies. Cleaner Engineering and Technology, 5.

Ismail, N.I. and Naz, M.Y. and Shukrullah, S. and Sulaiman, S.A. (2020) Mechanical earth modeling and sand onset production prediction for Well X in Malay Basin. Journal of Petroleum Exploration and Production Technology, 10 (7). pp. 2753-2758.

Naz, M.Y. and Shukrullah, S. and Sulaiman, S.A. and Khan, Y. and Alkanhal, M.A.S. and Ghaffar, A. (2019) Particle image velocimetry analysis of a swirling bed operation by using a mesh-coupled annular air distributor. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41 (9).

Shukrullah, S. and Naz, M.Y. and Mohamed, N.M. and Ibrahim, K.A. and Ghaffar, A. and AbdEl-Salam, N.M. (2019) Production of bundled CNTs by floating a compound catalyst in an atmospheric pressure horizontal CVD reactor. Results in Physics, 12. pp. 1163-1171.

Mahmood, T. and Naz, M.Y. and Sulaiman, S.A. and Jamil, Y. and Shukrullah, S. and Zahid, M. and Inayat, M. (2017) CFD Modeling and Experimental Validation of a Solar Still. MATEC Web of Conferences, 131.

Naz, M.Y. and Ismail, N.I. and Sulaiman, S.A. and Shukrullah, S. (2017) Characterization of erosion of gas pipelines by dry sand. Instrumentation Science and Technology, 45 (1). pp. 62-72.

Naz, M.Y. and Sulaiman, S.A. and Shukrullah, S. and Ghaffar, A. and Ibrahim, K.A. and AbdEl-Salam, N.M. (2017) Development of erosion-corrosion mechanisms for the study of steel surface behavior in a sand slurry. Measurement: Journal of the International Measurement Confederation, 106. pp. 203-210.

Naz, M.Y. and Sulaiman, S.A. and Shukrullah, S. and Ghaffar, A. and Khan, Y. and Ahmad, I. (2017) PIV investigations on particle velocity distribution in uniform swirling regime of fluidization. Granular Matter, 19 (2).

Naz, M.Y. and Ismail, N.I. and Sulaiman, S.A. and Shukrullah, S. (2016) ABRASIVE EROSION STUDY on S45C CARBON STEEL USING SAND BLASTING TECHNIQUE. Surface Review and Letters, 23 (5).

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Saheed, M.S.M. and Irshad, M.I. (2016) Effect of CVD Process Temperature on Activation Energy and Structural Growth of MWCNTs. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 47 (3). pp. 1413-1424.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Naz, M.Y. (2016) Effect of Ethylene Flow Rate and CVD Process Time on Diameter Distribution of MWCNTs. Materials and Manufacturing Processes, 31 (12). pp. 1537-1542.

Naz, M.Y. and Shukrullah, S. and Sulaiman, S.A. and Najeeb-Ur-Rehman and Khan, Y. and Ghaffar, A. and Ullah, S. (2016) Investigations on spatial distribution of low temperature plasma parameters using NiCr wire probe diagnostic. Measurement: Journal of the International Measurement Confederation, 91. pp. 194-200.

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Rehman, N.U. and Sagir, M. (2016) A Low-Frequency Dielectric Barrier Discharge System Design for Textile Treatment. Synthesis and Reactivity in Inorganic, Metal-Organic and Nano-Metal Chemistry, 46 (1). pp. 104-109.

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Rehman, N.U. and Khan, Y. (2016) Test of a new tip material for Langmuir probe diagnostic. Journal of Applied Mechanics and Technical Physics, 57 (2). pp. 211-218.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. (2015) Optimum temperature on structural growth of multiwalled carbon nanotubes with low activation energy. Diamond and Related Materials, 58. pp. 129-138.

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Shakir, I. and Ullah, S. and Sagir, M. and Pervaiz, M. (2015) Surface morphology and mechanical strength of AISI M2 tool steel treated in abnormal glow region of plasma. Surface Engineering and Applied Electrochemistry, 51 (1). pp. 58-64.

Ali, A. and Farooq, M.U. and Naz, M.Y. and Qayyum, A. and Khan, Y. and Ghaffar, A. and Shukrullah, S. (2015) Symmetric tungsten triple probe diagnostic for time resolved measurements in plasma discharge. International Journal of Applied Electromagnetics and Mechanics, 49 (2). pp. 289-298.

Farooq, M.U. and Ali, A. and Qayyum, A. and Naz, M.Y. and Khan, Y. and Shukrullah, S. and Ghaffar, C.A. (2015) Time function triple Langmuir probe measurements in low frequency pulsed DC discharge plasma. High Energy Chemistry, 49 (4). pp. 286-293.

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Rehman, N.U. (2014) Development of simple designs of multitip probe diagnostic systems for RF plasma characterization. The Scientific World Journal, 2014.

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Shakir, I. and Ullah, S. and Sagir, M. (2014) Testing of nickel-chrome alloy as a tip material for multi-tip langmuir probes. Surface Review and Letters, 21 (4).

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Ullah, S. and Naz, M.Y. (2016) Effective CO2 adsorption on pristine and chemically functionalized MWCNTs. In: UNSPECIFIED.

This list was generated on Mon Apr 29 05:39:27 2024 +08.