Items where Author is "Sallih, N."

Group by: Item Type | No Grouping
Number of items: 28.

Janga, V.S.R. and Awang, M. and Sallih, N. and Mun, C.R. and Wee, E.B. (2023) Computational analysis of thermo-mechanical characteristics in refill FSSW of thin AA7075-T6 sheets using smoothed-particle hydrodynamics. Computational Particle Mechanics.

Azliana Badardin, N. and Akmar Mokhtar, A. and Sallih, N. and Harith Irfan Ishak, M. (2023) Natural Frequency Analysis of Pipe with Different Boundary Conditions Using Analytical and Finite Element Method. Lecture Notes in Mechanical Engineering. pp. 559-570.

Khan, U. and Pao, W. and Sallih, N. (2023) Numerical Gas�Liquid Two-Phase Flow Regime Identification in a Horizontal Pipe Using Dynamic Pressure Data. Applied Sciences (Switzerland), 13 (2).

Chohan, I.M. and Ahmad, A. and Sallih, N. and Bheel, N. and Ali, M. and Deifalla, A.F. (2023) A review on life cycle assessment of different pipeline materials. Results in Engineering, 19. ISSN 25901230

Sajid, Z. and Karuppanan, S. and Kee, K.E. and Sallih, N. and Shah, S.Z.H. (2022) Bearing performance improvement of single-lap, single-bolt basalt composite joints by locally strengthening the joint location using carbon fibre. Thin-Walled Structures, 180.

Othman, N.H. and Mustapha, M. and Sallih, N. and Ahmad, A. and Mustapha, F. and Ismail, M.C. (2022) The Effect of Residual Solvent in Carbon�Based Filler Reinforced Polymer Coating on the Curing Properties, Mechanical and Corrosive Behaviour. Materials, 15 (10).

Khan, U. and Pao, W. and Sallih, N. and Hassan, F. (2022) Identification of Horizontal Gas-Liquid Two-Phase Flow Regime using Deep Learning. CFD Letters, 14 (10). pp. 68-78.

Khan, U. and Pao, W. and Sallih, N. (2022) A Review: Factors Affecting Internal Two-Phase Flow-Induced Vibrations. Applied Sciences (Switzerland), 12 (17).

Basith, M.S.A. and Sallih, N. and Soon, W.P.K. and Shibano, S.T. and Singh, R. and Sulong, M.A. (2021) Effects of selection of inlet perturbations, multiphase and turbulence equations on slug flow characteristics using altair® acusolve�. Processes, 9 (12).

Khalili, N.F.M. and Jun, H.J. and Ahmad, A. and Sallih, N. and Lajis, M.A. and Shamsudin, S. (2021) The Investigation of Hot Extrusion Process Parameters on Microstructure and Mechanical Performance of Aluminium Alloy in Biomedical Industry. Lecture Notes in Mechanical Engineering. pp. 327-332.

Khalili, N.F.M. and Jun, H.J. and Ahmad, A. and Sallih, N. and Lajis, M.A. and Shamsudin, S. (2021) The Investigation of Hot Extrusion Process Parameters on Microstructure and Mechanical Performance of Aluminium Alloy in Biomedical Industry. Lecture Notes in Mechanical Engineering. pp. 327-332.

Sajid, Z. and Karuppanan, S. and Sallih, N. and Kee, K.E. and Shah, S.Z.H. (2021) Role of washer size in mitigating adverse effects of bolt-hole clearance in a single-lap, single-bolt basalt composite joint. Composite Structures, 266.

Abdullah, M.N. and Mustapha, M. and Sallih, N. and Ahmad, A. and Mustapha, F. and Dahliyanti, A. (2021) Study and use of rice husk ash as a source of aluminosilicate in refractory coating. Materials, 14 (13).

Mujahid, Y. and Sallih, N. and Mustapha, M. and Abdullah, M.Z. and Mustapha, F. (2020) Effects of processing parameters for vacuum-bagging-only method on shape conformation of laminated composites. Processes, 8 (9).

Yamin, M.F. and Awang, M. and Suhuddin, U.F.H. and Sallih, N. and Klusemann, B. and dos Santos, J.F. (2020) Mechanical performance optimization of similar thin AA 7075-T6 sheets produced by refill friction stir spot welding Optimierung der mechanischen Leistungfähigkeit für artgleich produzierte AA 7075-T6-Bleche durch Rühr-Reib-Punkt-Schwei�en. Materialwissenschaft und Werkstofftechnik, 51 (6). pp. 830-835.

Badardin, N.A. and Mokhtar, A.A. and Sallih, N. and Ishak, M.H.I. (2020) VIBRATION CHARACTERISTICS STUDY OF DIFFERENT PIPE LENGTH WITH DIFFERENT END CONDITIONS. ARPN Journal of Engineering and Applied Sciences, 15 (21). pp. 2364-2374.

Badardin, N.A. and Mokhtar, A.A. and Sallih, N. and Ishak, M.H.I. (2020) VIBRATION CHARACTERISTICS STUDY OF DIFFERENT PIPE LENGTH WITH DIFFERENT END CONDITIONS. ARPN Journal of Engineering and Applied Sciences, 15 (21). pp. 2364-2374.

Badardin, N.A. and Mokhtar, A.A. and Sallih, N. and Ishak, M.H.I. (2020) VIBRATION CHARACTERISTICS STUDY OF DIFFERENT PIPE LENGTH WITH DIFFERENT END CONDITIONS. ARPN Journal of Engineering and Applied Sciences, 15 (21). pp. 2364-2374.

Nurshafiq Ramli, M. and Rani, A.M.A. and Sallih, N. and Aliyu, A.A.A. and Rao, T.V.V.L.N. (2020) Vibration Analysis Methods for Misalignment and Tolerance Problems in Machine Systems: A Review. Lecture Notes in Mechanical Engineering. pp. 57-66.

Mujahid, Y. and Sallih, N. and Abdullah, M.Z. (2020) A comparison of single-vacuum-bag and double-vacuum-bag methods for manufacturing high-quality laminated composites. Lecture Notes in Mechanical Engineering. pp. 457-467.

Mujahid, Y. and Sallih, N. and Abdullah, M.Z. (2020) A comparison of single-vacuum-bag and double-vacuum-bag methods for manufacturing high-quality laminated composites. Lecture Notes in Mechanical Engineering. pp. 457-467.

Dzulkifli, H. and Mustapha, M. and Sallih, N. and Kakooei, S. and Mustapha, F. (2020) The effect of reaction temperature on the formation of 2H-SiC and 3C-SiC nanowhiskers. Engineering Solid Mechanics, 8 (4). pp. 381-388.

Sallih, N. and Lescher, P. and Bhattacharyya, D. (2018) Flatwise Compressive Properties of Kenaf/Polypropylene Honeycomb Core. IOP Conference Series: Materials Science and Engineering, 370 (1).

Sallih, N. and Lescher, P. and Bhattacharyya, D. (2018) Flatwise Compressive Properties of Kenaf/Polypropylene Honeycomb Core. IOP Conference Series: Materials Science and Engineering, 370 (1).

Puspitasari, D. and Ginta, T.L. and Mustapha, M. and Sallih, N. and Puspitasari, P. (2018) Statistical optimization of stress relieving parameters on closed cell aluminium foam using central composite design. Archives of Materials Science and Engineering, 89 (2). pp. 55-63.

Puspitasari, D. and Ginta, T.L. and Mustapha, M. and Sallih, N. and Puspitasari, P. (2018) Statistical optimization of stress relieving parameters on closed cell aluminium foam using central composite design. Archives of Materials Science and Engineering, 89 (2). pp. 55-63.

Nizam, N.F.I.A. and Sallih, N. and Puspitasari, D. and Ginta, T.L. and Mustapha, M. (2018) The influence of substrate surface energy on the adhesion compatibility of epoxy adhesive using molecular simulation tool. ARPN Journal of Engineering and Applied Sciences, 13 (8). pp. 2786-2792.

Nizam, N.F.I.A. and Sallih, N. and Puspitasari, D. and Ginta, T.L. and Mustapha, M. (2018) The influence of substrate surface energy on the adhesion compatibility of epoxy adhesive using molecular simulation tool. ARPN Journal of Engineering and Applied Sciences, 13 (8). pp. 2786-2792.

This list was generated on Tue Dec 24 10:08:52 2024 +08.