Items where Author is "Ridha, S."

Abduljabbar, A. and Eissa Mohyaldinn, M. and Ridha, S. and Younis, O. and Saeed Alakbari, F. (2023) CFD-based erosion modelling of sand screen using dense discrete phase model: Investigating carrier fluid type effect. Advanced Powder Technology, 34 (9). ISSN 09218831

Hamza, M.F. and Soleimani, H. and Ridha, S. and Ahmed, A.A. and Sikiru, S. (2023) Double layer chemical encapsulation of SiO2 nanoparticles for interfacial tension reduction under low salinity condition. Journal of Molecular Liquids, 371.

Bataee, M. and Carter, R. and Hamdi, Z. and Ridha, S. (2023) Feasibility Study and LCoE Analysis of Geothermal Energy Production from Depleted Oil Fields and Gas Prospects Onshore Sarawak, Malaysia. In: UNSPECIFIED.

Sauki, A. and Megat Khamaruddin, P.N.F. and Irawan, S. and Kinif, I. and Ridha, S. and Aziz, R.A. and Wan Bakar, W.Z. (2023) Prophecy of Cutting Transport Ratio through a Relationship between Equivalent Circulating Density and Drilled Solid Concentration. Key Engineering Materials, 939. pp. 83-91.

Sauki, A. and Khamaruddin, P.N.F.M. and Irawan, S. and Kinif, I. and Ridha, S. (2022) Application of Multiple Regression Technique for Predicting Drilling Rate in Loss Zone. In: UNSPECIFIED.

Kumar, A. and Ridha, S. and Ilyas, S.U. and Dzulkarnain, I. and Pratama, A. (2022) Application of boundary-fitted convolutional neural network to simulate non-Newtonian fluid flow behavior in eccentric annulus. Neural Computing and Applications.

Kumar, A. and Ridha, S. and Ilyas, S.U. and Dzulkarnain, I. and Astra Agus Pramana, D.N. (2022) Correction to: Application of boundary-fitted convolutional neural network to simulate non-Newtonian fluid flow behavior in eccentric annulus (Neural Computing and Applications, (2022), 34, 14, (12043-12061), 10.1007/s00521-022-07092-w). Neural Computing and Applications, 34 (23). p. 21415. ISSN 09410643

Arain, A.H. and Ridha, S. and Suppiah, R.R. and Irawan, S. and Ilyas, S.U. (2022) Developing an efficient ester-based drilling fluid based on Calophyllum Inophyllum oil for eco-friendly drilling of unconventional shale formation. Journal of Petroleum Science and Engineering, 219.

Arain, A.H. and Ridha, S. and Ali, I. (2022) Development and performance evaluation of castor oil based biodiesel as an eco-friendly ester-based drilling fluid. Petroleum Science and Technology.

Arain, A.H. and Ridha, S. and Ali, I. (2022) Development and performance evaluation of castor oil based biodiesel as an eco-friendly ester-based drilling fluid. Petroleum Science and Technology.

Arain, A.H. and Ridha, S. and Ilyas, S.U. and Mohyaldinn, M.E. and Suppiah, R.R. (2022) Evaluating the influence of graphene nanoplatelets on the performance of invert emulsion drilling fluid in high-temperature wells. Journal of Petroleum Exploration and Production Technology.

Arain, A.H. and Ridha, S. and Ilyas, S.U. and Mohyaldinn, M.E. and Suppiah, R.R. (2022) Evaluating the influence of graphene nanoplatelets on the performance of invert emulsion drilling fluid in high-temperature wells. Journal of Petroleum Exploration and Production Technology, 12 (9). pp. 2467-2491.

Arain, A.H. and Ridha, S. and Mohyaldinn, M.E. and Suppiah, R.R. (2022) Improving the performance of invert emulsion drilling fluid using boron nitride and graphene nanoplatelets for drilling of unconventional high-temperature shale formations. Journal of Molecular Liquids, 363.

Ridha, S. and Dzulkarnain, I. and Abdurrahman, M. and Ilyas, S.U. and Bataee, M. (2022) Microstructural properties and compressive strength of fly ash-based geopolymer cement immersed in CO2-saturated brine at elevated temperatures. International Journal of Environmental Science and Technology, 19 (8). pp. 7589-7598.

Maqsood, K. and Ali, A. and Ilyas, S.U. and Garg, S. and Danish, M. and Abdulrahman, A. and Rubaiee, S. and Alsaady, M. and Hanbazazah, A.S. and Mahfouz, A.B. and Ridha, S. and Mubashir, M. and Lim, H.R. and Khoo, K.S. and Show, P.L. (2022) Multi-objective optimization of thermophysical properties of multiwalled carbon nanotubes based nanofluids. Chemosphere, 286.

Abdurrahman, M. and Sidek, A. and Agi, A. and Junin, R. and Ridha, S. and Huy, N.X. and Arsad, A. and Gbadamosi, A. and Yakasai, F. and Oseh, J. and Gbonhinbor, J. (2022) A Rapid Method to Predict Minimum Miscibility Pressure Through Interfacial Tension Test and Visual Observation. In: UNSPECIFIED.

Soni, A. and Das, P.K. and Yusuf, M. and Ridha, S. (2022) Tribological behavior of particulates reinforced sustainable composites: Effect of composition, load, and sliding speed. Sustainable Chemistry and Pharmacy, 29.

Abdullah, A.H. and Ridha, S. and Mohshim, D.F. and Yusuf, M. and Kamyab, H. and Krishna, S. and Maoinser, M.A. (2022) A comprehensive review of nanoparticles: Effect on water-based drilling fluids and wellbore stability. Chemosphere, 308.

Krishna, S. and Ridha, S. and Ilyas, S.U. and Campbell, S. and Bhan, U. and Bataee, M. (2021) Application of deep learning technique to predict downhole pressure differential in eccentric annulus of ultra-deep well. In: UNSPECIFIED.

Ridha, S. and Dzulkarnain, I. and Abdurrahman, M. and Ilyas, S.U. and Bataee, M. (2021) Microstructural properties and compressive strength of fly ash-based geopolymer cement immersed in CO2-saturated brine at elevated temperatures. International Journal of Environmental Science and Technology.

Kumar, A. and Ridha, S. and Narahari, M. and Ilyas, S.U. (2021) Physics-guided deep neural network to characterize non-Newtonian fluid flow for optimal use of energy resources. Expert Systems with Applications, 183.

Fauzi, N.A.A.M. and Ganat, T.A.O. and Elraies, K.A. and Ridha, S. and Zainal, S. and Saphanuchart, W. (2020) Agglomeration of fines and sand in the separator. In: UNSPECIFIED.

Krishna, S. and Ridha, S. and Vasant, P. and Ilyas, S.U. and Sophian, A. (2020) Conventional and intelligent models for detection and prediction of fluid loss events during drilling operations: A comprehensive review. Journal of Petroleum Science and Engineering, 195.

Ali, A. and Ilyas, S.U. and Garg, S. and Alsaady, M. and Maqsood, K. and Nasir, R. and Abdulrahman, A. and Zulfiqar, M. and Mahfouz, A.B. and Ahmed, A. and Ridha, S. (2020) Dynamic viscosity of Titania nanotubes dispersions in ethylene glycol/water-based nanofluids: Experimental evaluation and predictions from empirical correlation and artificial neural network. International Communications in Heat and Mass Transfer, 118.

Kumar, A. and Ridha, S. and Ganet, T. and Vasant, P. and Ilyas, S.U. (2020) Machine learning methods for herschel-bulkley fluids in annulus: Pressure drop predictions and algorithm performance evaluation. Applied Sciences (Switzerland), 10 (7).

Krishna, S. and Ridha, S. and Vasant, P. and Ilyas, S.U. (2020) New analytical approach for predicting surge/swab pressure gradient using mud clinging effect and frictional pressure losses: For yield power law fluid. In: UNSPECIFIED.

Krishna, S. and Ridha, S. and Vasant, P. (2020) Prediction of Bottom-Hole Pressure Differential During Tripping Operations Using Artificial Neural Networks (ANN). Lecture Notes in Networks and Systems, 118. pp. 379-388.

Krishna, S. and Ridha, S. and Vasant, P. and Ilyas, S.U. and Ofei, T.N. (2020) Simplified predictive model for downhole pressure surges during tripping operations using power law drilling fluids. Journal of Energy Resources Technology, Transactions of the ASME, 142 (12).

Krishna, S. and Ridha, S. and Vasant, P. and Ilyas, S.U. and Ofei, T.N. (2020) Simplified predictive model for downhole pressure surges during tripping operations using power law drilling fluids. Journal of Energy Resources Technology, Transactions of the ASME, 142 (12).

Kumar, A. and Ridha, S. and Ilyas, S.U. (2020) Unsupervised Deep Learning Algorithm to Solve Sub-Surface Dynamics for Petroleum Engineering Applications. In: UNSPECIFIED.

Momeni, M.S. and Ridha, S. and Hosseini, S.J. and Meyghani, B. and Emamian, S.S. (2018) Bit selection using field drilling data and mathematical investigation. IOP Conference Series: Materials Science and Engineering, 328 (1).

Ridha, S. and Abd Hamid, A.I. and Abdul Halim, A.H. and Zamzuri, N.A. (2018) Elasticity and expansion test performance of geopolymer as oil well cement. IOP Conference Series: Earth and Environmental Science, 140 (1).

Pratama, E. and Ismail, M.S. and Ridha, S. (2018) Identification of coal seams suitability for carbon dioxide sequestration with enhanced coalbed methane recovery: a case study in South Sumatera Basin, Indonesia. Clean Technologies and Environmental Policy, 20 (3). pp. 581-587.

Ridha, S. and Abd Hamid, A.I. and Che Ku Mazuan, C.K.A.H. (2018) Influence of different brine water salinity on mechanical properties of fly ash-based geopolymer cement. International Journal of Structural Integrity, 9 (2). pp. 142-152.

Ridha, S. and Abd Hamid, A.I. and Che Ku Mazuan, C.K.A.H. (2018) Influence of different brine water salinity on mechanical properties of fly ash-based geopolymer cement. International Journal of Structural Integrity, 9 (2). pp. 142-152.

Ridha, S. and Setiawan, R.A. and Hamid, A.I.A. and Shahari, A.R. (2018) The influence of CO2 accelerated carbonation on alkali-activated fly ash cement under elevated temperature and pressure: Einfluss von CO2 beschleunigter Karbonisierung auf alkalisch aktivierten Flugaschezement unter erhöhter Temperatur und erhöhtem Druck. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 483-488.

Momeni, M. and Hosseini, S.J. and Ridha, S. and Laruccia, M.B. and Liu, X. (2018) An optimum drill bit selection technique using artificial neural networks and genetic algorithms to increase the rate of penetration. Journal of Engineering Science and Technology, 13 (2). pp. 361-372. (Submitted)

Bataee, M. and Irawan, S. and Namazi-saleh, F. and Ridha, S. (2017) Development of stress model near the wellbore using an iterative coupling method. International Journal of Geomechanics, 17 (2).

Kanesan, D. and Ridha, S. and Rao, P. (2017) Formulation of geopolymer cement using mixture of slag and class f fly ash for oil well cementing. IOP Conference Series: Materials Science and Engineering, 201 (1).

Ridha, S. and Lubis, L.A. and Setiawan, R.A. and Razif Mohar, J.M.B. (2017) Investigation on mixed oil-cement for wellbore integrity using acoustic velocity. Key Engineering Materials, 740 KE. pp. 190-194.

Momeni, M. and Ridha, S. and Hosseiniz, S.J. and Liu, X. and Atashnezhad, A. and Ghaheri, S. (2017) Optimum drill bit selection by using bit images and mathematical investigation. International Journal of Engineering, Transactions B: Applications, 30 (11). pp. 1807-1813.

Ridha, S. and Pratama, E. and Ismail, Mohd.S. (2017) Performance assessment of CO2 sequestration in a horizontal well for enhanced coalbed methane recovery in deep unmineable coal seams. Chemical Engineering Transactions, 56. pp. 589-594.

Pratama, E. and Ismail, M.S. and Ridha, S. (2017) Screening criteria of optimum carbon dioxide injection for enhanced coalbed methane recovery and prediction of carbon dioxide storage capacity: A case study in south sumatera basin, Indonesia. Chemical Engineering Transactions, 56. pp. 997-1002.

Bataee, M. and Irawan, S. and Ridha, S. and Hematpour, H. and Hamdi, Z. (2017) Wellbore failure during water-alternating-gas injection by use of flow-stress coupling method. SPE Journal, 22 (1). pp. 172-183.

Pratama, E. and Ismail, M.S. and Ridha, S. and Buntoro, A. (2017) An alternative approach for dynamic modeling in a complexly structured and heterogeneous carbonate gas reservoir: a field case study. Arabian Journal of Geosciences, 10 (16).

Pratama, E. and Suhaili Ismail, M. and Ridha, S. (2017) An integrated workflow to characterize and evaluate low resistivity pay and its phenomenon in a sandstone reservoir. Journal of Geophysics and Engineering, 14 (3). pp. 513-519.

Salehudin, S.S. and Ridha, S. (2016) Coconut residue as biopolymer drag reducer agent in water injection system. International Journal of Applied Engineering Research, 11 (13). pp. 8037-8040.

Salehudin, S.S. and Ridha, S. (2016) Coconut residue as biopolymer drag reducer agent in water injection system. International Journal of Applied Engineering Research, 11 (13). pp. 8037-8040.

Bataee, M. and Irawan, S. and Ridha, S. and Hematpour, H. and Hamdi, Z. (2016) Effects of injection pressure on wellbore stress using flow-stress coupling method. In: UNSPECIFIED.

Ridha, S. and Akmalludin, M. and Salehudin, S.S. (2016) Microstructure investigations on nano-geopolymer cement cured under HPHT conditions. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 144-149.

Ridha, S. and Akmalludin, M. and Salehudin, S.S. (2016) Microstructure investigations on nano-geopolymer cement cured under HPHT conditions. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 144-149.

Bataee, M. and Irawan, S. and Ridha, S. (2016) Wellbore stability model based on iterative coupling method in water alternating gas injection. Journal of Petroleum Exploration and Production Technology, 6 (4). pp. 755-775.

Ridha, S. and Yerikania, U. (2015) New nano-geopolymer cement system improves wellbore integrity upon acidizing job: Experimental findings. In: UNSPECIFIED.

Ridha, S. and Yerikania, U. (2014) Geopolymer cement slurries with enhanced mechanical and physical properties for oilwell cementing. In: UNSPECIFIED.

Ridha, S. and Wardaya, P.D. (2014) Oil spill detection and characterization from satellite image using artificial neural network algorithm. In: UNSPECIFIED.

Wardaya, P.D. and Major, R.P. and Sum, C.W. and Ridha, S. (2014) Seismic modeling for investigating the influence of pore geometry to the seismic velocity in carbonate rock. In: UNSPECIFIED.

Wardaya, P.D. and Noh, K.A.B.M. and Yusoff, W.I.B.W. and Ridha, S. and Nurhandoko, B.E.B. (2014) The thin section rock physics: Modeling and measurement of seismic wave velocity on the slice of carbonates. In: UNSPECIFIED.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology, 3 (4). pp. 303-311.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology, 3 (4). pp. 303-311.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology, 3 (4). pp. 303-311.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology, 3 (4). pp. 303-311.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology, 3 (4). pp. 303-311.