Items where Author is "Rao, T.V.V.L.N."

Rao, T.V.V.L.N. and Akmar Mokhtar, A. and Muhammad, M. and Haji Ya, H. (2023) Analysis of Optimally Tuned Active Dynamic Vibration Absorber. Lecture Notes in Mechanical Engineering. pp. 455-462.

Al-Amin, M. and Abdul-Rani, A.M. and Rao, T.V.V.L.N. and Danish, M. and Rubaiee, S. and Mahfouz, A.B. and Parameswari, R.P. and Wani, M.F. (2022) Investigation of machining and modified surface features of 316L steel through novel hybrid of HA/CNT added-EDM process. Materials Chemistry and Physics, 276.

Al-Amin, M. and Abdul-Rani, A.M. and Ahmed, R. and Rao, T.V.V.L.N. (2021) Multiple-objective optimization of hydroxyapatite-added EDM technique for processing of 316L-steel. Materials and Manufacturing Processes, 36 (10). pp. 1134-1145.

Al-Amin, M. and Abdul-Rani, A.M. and Ahmed, R. and Rao, T.V.V.L.N. (2021) Multiple-objective optimization of hydroxyapatite-added EDM technique for processing of 316L-steel. Materials and Manufacturing Processes, 36 (10). pp. 1134-1145.

Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2021) Stability Analysis of Partial Slip Texture Journal Bearing. Lecture Notes in Mechanical Engineering. pp. 217-225.

Al Kaisy, G.M.J. and Mutalib, M.I.A. and Rao, T.V.V.L.N. and Senatore, A. (2021) Tribological performance of low viscosity halogen-free ammonium based protic ionic liquids with carboxylate anions as neat lubricants. Tribology International, 160.

Al-Amin, M. and Abdul-Rani, A.M. and Danish, M. and Thompson, H.M. and Abdu Aliyu, A.A. and Hastuty, S. and Zohura, F.T. and Bryant, M.G. and Rubaiee, S. and Rao, T.V.V.L.N. (2020) Assessment of PM-EDM cycle factors influence on machining responses and surface properties of biomaterials: A comprehensive review. Precision Engineering, 66. pp. 531-549.

Al-Amin, M. and Abdul-Rani, A.M. and Danish, M. and Thompson, H.M. and Abdu Aliyu, A.A. and Hastuty, S. and Zohura, F.T. and Bryant, M.G. and Rubaiee, S. and Rao, T.V.V.L.N. (2020) Assessment of PM-EDM cycle factors influence on machining responses and surface properties of biomaterials: A comprehensive review. Precision Engineering, 66. pp. 531-549.

Ali, S. and Abdul Rani, A.M. and Baig, Z. and Ahmed, S.W. and Hussain, G. and Subramaniam, K. and Hastuty, S. and Rao, T.V.V.L.N. (2020) Biocompatibility and corrosion resistance of metallic biomaterials. Corrosion Reviews, 38 (5). pp. 381-402.

Krishnan, S. and Krishna, A. and Nordin, A. and Amirtham, V. and Rani, A.M.A. and Rao, T.V.V.L.N. (2020) Design and Fabrication of a Parallel Mechanism for Foot/Ankle Rehabilitation Therapy. Lecture Notes in Mechanical Engineering. pp. 133-141.

Krishnan, S. and Krishna, A. and Nordin, A. and Amirtham, V. and Rani, A.M.A. and Rao, T.V.V.L.N. (2020) Design and Fabrication of a Parallel Mechanism for Foot/Ankle Rehabilitation Therapy. Lecture Notes in Mechanical Engineering. pp. 133-141.

Khan, R. and Ya, H.H. and Pao, W. and Rao, T.V.V.L.N. and Alam, A. and Azeem, M. (2020) Investigation of maximum erosion zone in the horizontal 90° elbow. Lecture Notes in Mechanical Engineering. pp. 223-230.

Khan, R. and Ya, H.H. and Pao, W. and Rao, T.V.V.L.N. and Alam, A. and Azeem, M. (2020) Investigation of maximum erosion zone in the horizontal 90° elbow. Lecture Notes in Mechanical Engineering. pp. 223-230.

Rao, T.V.V.L.N. and A Rani, A.M. and Mohamed, N.M. and Ya, H.H. and Awang, M. and M Hashim, F. (2020) Static and stability analysis of partial slip texture multi-lobe journal bearings. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 234 (4). pp. 567-587.

Nurshafiq Ramli, M. and Rani, A.M.A. and Sallih, N. and Aliyu, A.A.A. and Rao, T.V.V.L.N. (2020) Vibration Analysis Methods for Misalignment and Tolerance Problems in Machine Systems: A Review. Lecture Notes in Mechanical Engineering. pp. 57-66.

Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2019) Analysis of magnetohydrodynamic partial slip laser bump texture slider and journal bearing. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 233 (12). pp. 1921-1938.

Ali, S. and Abdul Rani, A.M. and Altaf, K. and Hussain, P. and Prakash, C. and Hastuty, S. and Rao, T.V.V.L.N. and Aliyu, A.�A.A. and Subramaniam, K. (2019) Investigation of alloy composition and sintering parameters on the corrosion resistance and microhardness of 316L stainless steel alloy. Lecture Notes in Mechanical Engineering. pp. 532-541. ISSN 21954356

Ali, S. and Abdul Rani, A.M. and Altaf, K. and Hussain, P. and Prakash, C. and Hastuty, S. and Rao, T.V.V.L.N. and Aliyu, A.�A.A. and Subramaniam, K. (2019) Investigation of alloy composition and sintering parameters on the corrosion resistance and microhardness of 316L stainless steel alloy. Lecture Notes in Mechanical Engineering. pp. 532-541.

Ali, S. and Abdul Rani, A.M. and Altaf, K. and Hussain, P. and Prakash, C. and Hastuty, S. and Rao, T.V.V.L.N. and Aliyu, A.�A.A. and Subramaniam, K. (2019) Investigation of alloy composition and sintering parameters on the corrosion resistance and microhardness of 316L stainless steel alloy. Lecture Notes in Mechanical Engineering. pp. 532-541.

Ali, S. and Abdul Rani, A.M. and Altaf, K. and Hussain, P. and Prakash, C. and Hastuty, S. and Rao, T.V.V.L.N. and Aliyu, A.�A.A. and Subramaniam, K. (2019) Investigation of alloy composition and sintering parameters on the corrosion resistance and microhardness of 316L stainless steel alloy. Lecture Notes in Mechanical Engineering. pp. 532-541.

Aliyu, A.�A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Prakash, C. and Rao, T.V.V.L.N. and Axinte, E. and Ali, S. (2019) Synthesis and characterization of bioceramic oxide coating on Zr-Ti-Cu-Ni-Be BMG by electro discharge process. Lecture Notes in Mechanical Engineering. pp. 518-531.

Aliyu, A.�A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Prakash, C. and Rao, T.V.V.L.N. and Axinte, E. and Ali, S. (2019) Synthesis and characterization of bioceramic oxide coating on Zr-Ti-Cu-Ni-Be BMG by electro discharge process. Lecture Notes in Mechanical Engineering. pp. 518-531.

Aliyu, A.�A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Prakash, C. and Rao, T.V.V.L.N. and Axinte, E. and Ali, S. (2019) Synthesis and characterization of bioceramic oxide coating on Zr-Ti-Cu-Ni-Be BMG by electro discharge process. Lecture Notes in Mechanical Engineering. pp. 518-531.

Aliyu, A.�A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Prakash, C. and Rao, T.V.V.L.N. and Axinte, E. and Ali, S. (2019) Synthesis and characterization of bioceramic oxide coating on Zr-Ti-Cu-Ni-Be BMG by electro discharge process. Lecture Notes in Mechanical Engineering. pp. 518-531.

Azam, F.I. and Abdul Rani, A.M. and Altaf, K. and Rao, T.V.V.L.N. and Zaharin, H.A. (2018) An In-Depth Review on Direct Additive Manufacturing of Metals. IOP Conference Series: Materials Science and Engineering, 328 (1).

Faez, K.M. and Hamdavi, S. and Rao, T.V.V.L.N. and Ya, H.H. and Mohamed, N.M. (2018) Performance analysis of grooved hydrodynamic journal bearing with multi- depth textured surface. International Journal of Vehicle Structures and Systems, 10 (2). pp. 142-145.

Faez, K.M. and Hamdavi, S. and Rao, T.V.V.L.N. and Ya, H.H. and Mohamed, N.M. (2018) Performance analysis of grooved hydrodynamic journal bearing with multi- depth textured surface. International Journal of Vehicle Structures and Systems, 10 (2). pp. 142-145.

Abdul-Rani, A.M. and Krishnan, S. and Nagarajan, T. and Rao, T.V.V.L.N. and Ramiah, R. and Ambaraj, W. (2017) Early mobilization using heat treated shape memory alloy (sma) for rehabilitation phases. Key Engineering Materials, 724 KE. pp. 112-116.

Abdul-Rani, A.M. and Krishnan, S. and Nagarajan, T. and Rao, T.V.V.L.N. (2017) Inverse kinematics-stewart platform actuated by shape memory alloy for immobilization of ankle-foot rehabilitation. Key Engineering Materials, 724 KE. pp. 105-111.

Hamdavi, S. and Rao, T.V.V.L.N. and Muhammad, M. and Faez, K.M. and Ya, H.H. (2017) Linear stability analysis of short journal bearing with an axial groove: Lineare Stabilitätsanalyse von Kurzgleitlagern mit einer axialen Nut. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 210-217.

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. and Rao, T.V.V.L.N. (2017) Meshless Local B-Spline Collocation Method for Two-Dimensional Heat Conduction Problems With Nonhomogenous and Time-Dependent Heat Sources. Journal of Heat Transfer, 139 (7).

Al Kaisy, G.M.J. and Abdul Mutalib, M.I. and Rao, T.V.V.L.N. (2017) Novel halogen free hydrophobic trioctylammonium-based protic ionic liquids with carboxylate anions: Synthesis, characterization, and thermophysical properties. Journal of Molecular Liquids, 242. pp. 349-356.

Al Kaisy, G.M.J. and Mutalib, M.I.A. and Leveque, J.M. and Rao, T.V.V.L.N. (2017) Novel low viscosity ammonium-based ionic liquids with carboxylate anions: Synthesis, characterization, and thermophysical properties. Journal of Molecular Liquids, 230. pp. 565-573.

Faez, K.M. and Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. and Mohamed, N.M. (2017) Performance analysis of long grooved journal bearing with slip, no-slip, and slip/no-slip textured surface configurations. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5794-5798.

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Hashim, F.M. (2017) Stability evaluation of three-layered journal bearing with slip/partial slip. Industrial Lubrication and Tribology, 69 (3). pp. 334-341.

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2016) Analysis of Micropolar and Power Law Fluid�Lubricated Slider and Journal Bearing with Partial Slip�Partial Slip Texture Configuration. Tribology Transactions, 59 (5). pp. 896-910.

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2016) Analysis of Micropolar and Power Law Fluid�Lubricated Slider and Journal Bearing with Partial Slip�Partial Slip Texture Configuration. Tribology Transactions, 59 (5). pp. 896-910.

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2016) Analysis of Micropolar and Power Law Fluid�Lubricated Slider and Journal Bearing with Partial Slip�Partial Slip Texture Configuration. Tribology Transactions, 59 (5). pp. 896-910.

Abdul-Rani, A.M. and Nanimina, A.M. and Ginta, T.L. and Rao, T.V.V.L.N. and Pedapati, S.R. (2016) Application of nano aluminum in modified EDM: pmedm. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12117-12121.

Omer, M.A. and Rao, T.V.V.L.N. (2016) Effect of additive volume fraction on a fluid film pressure and load of hydrodynamic journal bearing using ferromagnetic fluid. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4203-4207.

Omer, M.A. and Rao, T.V.V.L.N. (2016) Effect of additive volume fraction on a fluid film pressure and load of hydrodynamic journal bearing using ferromagnetic fluid. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4203-4207.

Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. (2016) Effect of surface texturing on hydrodynamic performance of journal bearings. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 172-176.

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Hashim, F.M. (2016) Load capacity coefficient evaluation of three-layered journal bearing with slip. Jurnal Teknologi, 78 (6-10). pp. 39-43.

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Hashim, F.M. (2016) Load capacity coefficient evaluation of three-layered journal bearing with slip. Jurnal Teknologi, 78 (6-10). pp. 39-43.

Prasanth Kumar, B. and Rao, T.V.V.L.N. and Baharom, M. (2016) Microstructure based finite element analysis for deformation behavior of magnesium based composites. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12967-12972.

Prasanth Kumar, B. and Rao, T.V.V.L.N. and Baharom, M. (2016) Microstructure based finite element analysis for deformation behavior of magnesium based composites. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12967-12972.

Rao, T.V.V.L.N. and Mokhtar, A.A. and Muhammad, M. and Hussain, P. (2016) Optimally tuned active damped dynamic vibration absorber. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13380-13383.

Rao, T.V.V.L.N. and Mokhtar, A.A. and Muhammad, M. and Hussain, P. (2016) Optimally tuned active damped dynamic vibration absorber. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13380-13383.

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Nagarajan, T. and Hashim, F.M. (2016) Stability analysis of double porous and surface porous layer journal bearing. Tribology - Materials, Surfaces and Interfaces, 10 (1). pp. 19-25.

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Nagarajan, T. and Hashim, F.M. (2016) Stability analysis of double porous and surface porous layer journal bearing. Tribology - Materials, Surfaces and Interfaces, 10 (1). pp. 19-25.

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Nagarajan, T. and Hashim, F.M. (2016) Stability analysis of double porous and surface porous layer journal bearing. Tribology - Materials, Surfaces and Interfaces, 10 (1). pp. 19-25.

Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. and Faez, K.M. (2016) An analytical approach to investigate the effect of grooved surface on short journal bearing's performance. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12045-12049.

Faez, K.M. and Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. (2016) An analytical investigation of the grooved journal bearing's performance with slip/no-slip texture bearing. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12990-12993.

Rao, T.V.V.L.N. and Rani, A.M.A. and Sufian, S. and Mohamed, N.M. (2015) Analysis of CNT additives in porous layered thin film lubrication with electric double layer. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Analysis of two-layered film journal bearing with partial slip surface. Advanced Materials Research, 903. pp. 215-220.

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Analysis of two-layered journal bearing lubricated with ferrofluid. In: UNSPECIFIED.

Lias, M.R. and Awang, M. and Rao, T.V.V.L.N. and Ahmad, M.F.A. and Patil, S. (2014) Evaluation of spur gear pair on tooth root bending stress in radial misalignment contact condition. In: UNSPECIFIED.

Lias, M.R. and Awang, M. and Rao, T.V.V.L.N. and Fadhil, M. (2014) Evaluation of spur gear pair on tooth root bending stress in yawing misalignment contactcondition. Advanced Materials Research, 980. pp. 97-101.

Abdul-Rani, A.M. and Ismail, M.Z. and Zaky, M.A. and Noor, M.H.M. and Zhun, Y.Y. and Ganesan, K. and Rao, T.V.V.L.N. and Kamal, S. and Ginta, T.L. (2014) Improving rate of penetration for PDC drill bit using reverse engineering. Applied Mechanics and Materials, 607. pp. 153-160.

Rao, T.V.V.L.N. and Awang, M. and Lias, M.R. and Rani, A.M.A. (2014) Nonlinear analysis of spur gear pair with time-varying mesh stiffness. In: UNSPECIFIED.

Ahmad, M.A.R. and Nasiruddin, Z.R. and Rao, T.V.V.L.N. and Altaf, K. (2014) Overcoming limitation in DFM using layer manufacturing. Applied Mechanics and Materials, 660. pp. 94-98.

Omer, M.A. and Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Pressure distribution in hydrodynamic journal bearing with lubricants additives. In: UNSPECIFIED.

Lias, M.R. and Awang, M. and Rao, T.V.V.L.N. (2013) A numerical FEM solution of gear root stress in offset axial mesh misalignment. Applied Mechanics and Materials, 393. pp. 375-380.