Items where Author is "Mustapha, M."

[up] Up a level
Group by: Item Type | No Grouping
Number of items: 69.

Alam, M.A. and Ya, H.B. and Azeem, M. and Mustapha, M. and Yusuf, M. and Masood, F. and Marode, R.V. and Sapuan, S.M. and Ansari, A.H. (2023) Advancements in aluminum matrix composites reinforced with carbides and graphene: A comprehensive review. Nanotechnology Reviews, 12 (1).

Jaafar, M.F. and Mustapha, F. and Mustapha, M. (2023) Dynamic Compression Simulation of Magnetorheological Elastomer Using Bouc-Wen Hysteretic Model. Materials Science Forum, 1093. pp. 37-43. ISSN 02555476

Amin Abd Majid, M. and Cyril Hampo, C. and Bt Akmar, A. and Haji Ya, H. and Mustapha, M. (2023) Life Cycle Assessment and Economic Analysis of a Vapor Compression System Integrated with a Large District Cooling Plant. Lecture Notes in Mechanical Engineering. pp. 427-437.

Ma, Y. and Mustapha, F. and Ishak, M.R. and Abdul Rahim, S. and Mustapha, M. (2023) Machine learning methods for multi-rotor UAV structural damage detection based on MEMS sensor. International Journal of Aeroacoustics.

Baharudin, B.A. and Mustapha, M. and Ismail, A. and Zulkipli, F.N. and Ayob, F. and Ahmad, A. (2023) Microhardness and Process Parameter Optimization of Friction Stir Welding on an AA5052 Thin Plate. Advanced Structured Materials, 165. pp. 133-141.

Ismail, A. and Al�Hapis Abdul Razak, M. and Mustapha, M. and Zaki Abdullah, M. and Hussain, P. and Mohamed Saat, A. and Ayub, F. and Muaz bin Mohd Faisal, M. (2023) Optimisation of Fe-Al Diffusion Bonding in Air. Lecture Notes in Mechanical Engineering. pp. 955-964.

Baharudin, B.A. and Mustapha, M. and Ismail, A. and Zulkipli, F.N. and Ayob, F. and Ahmad, A. (2023) Residual Stress Optimization of Friction Stir Welding on an AA5052 Thin Plate. Advanced Structured Materials, 165. pp. 143-151.

Azeem, M. and Ya, H.H. and Kumar, M. and Stabla, P. and Smolnicki, M. and Gemi, L. and Khan, R. and Ahmed, T. and Ma, Q. and Sadique, M.R. and Mokhtar, A.A. and Mustapha, M. (2022) Application of Filament Winding Technology in Composite Pressure Vessels and Challenges: A Review. Journal of Energy Storage, 49.

Azeem, M. and Ya, H.H. and Kumar, M. and Stabla, P. and Smolnicki, M. and Gemi, L. and Khan, R. and Ahmed, T. and Ma, Q. and Sadique, M.R. and Mokhtar, A.A. and Mustapha, M. (2022) Application of Filament Winding Technology in Composite Pressure Vessels and Challenges: A Review. Journal of Energy Storage, 49.

Ma, Y. and Mustapha, F. and Ishak, M.R. and Rahim, S.A. and Mustapha, M. (2022) Data-driven Methods for Damage Detection and Identification of UAV: A Review. Journal of Aeronautics, Astronautics and Aviation, 54 (4). pp. 405-420.

Ma, Y. and Mustapha, F. and Ishak, M.R. and Rahim, S.A. and Mustapha, M. (2022) Data-driven Methods for Damage Detection and Identification of UAV: A Review. Journal of Aeronautics, Astronautics and Aviation, 54 (4). pp. 405-420.

Ma, Y. and Mustapha, F. and Ishak, M.R. and Rahim, S.A. and Mustapha, M. (2022) Data-driven Methods for Damage Detection and Identification of UAV: A Review. Journal of Aeronautics, Astronautics and Aviation, 54 (4). pp. 405-420. ISSN 19907710

Baharudin, B.A. and Mustapha, M. and Azman, M.A. and Shamsuddin, A.N. and Ismail, A. and Tuan Anuwa, T.M.N. and Ab Rahman, F. and Ayob, F. and Hamid, D.A. and Rojan, M.A. (2022) The Effect of Process Temperature and Holding Time on Weldability in Diffusion Welding of Duplex Stainless Steels and Marine Grade Steels for Oil and Gas Pipes. Advanced Structured Materials, 167.

Othman, N.H. and Mustapha, M. and Sallih, N. and Ahmad, A. and Mustapha, F. and Ismail, M.C. (2022) The Effect of Residual Solvent in Carbon�Based Filler Reinforced Polymer Coating on the Curing Properties, Mechanical and Corrosive Behaviour. Materials, 15 (10).

Zakaria, M.S. and Mustapha, M. and Azmi, A.I. and Ahmad, A. and Ismail, S.O. and Shuaib, N.A. (2022) Effects of submerged convective cooling in the turning of AZ31 magnesium alloy for tool temperature and wear improvement. International Journal of Advanced Manufacturing Technology.

Zakaria, M.S. and Mustapha, M. and Azmi, A.I. and Ahmad, A. and Ismail, S.O. and Shuaib, N.A. (2022) Effects of submerged convective cooling in the turning of AZ31 magnesium alloy for tool temperature and wear improvement. International Journal of Advanced Manufacturing Technology, 120 (5-6). pp. 3181-3200.

Baharudin, B.A. and Ayob, F. and Abdul Rahim, A. and Mustapha, M. and Ismail, A. and Ab Rahman, F. and Ismail, A. (2022) Investigation on the Mechanical and Microstructural Characteristics of Diffusional Bonded Gray Cast Iron and Low Carbon Steel. Advanced Structured Materials, 167. pp. 245-262.

Dahliyanti, A. and Yunitama, D.A. and Rofiqoh, I.M. and Mustapha, M. (2022) Synthesis and characterization of silica xerogel from corn husk waste as cationic dyes adsorbent. F1000Research, 11.

Al-Dhahebi, A.M. and Jose, R. and Mustapha, M. and Saheed, M.S.M. (2022) Ultrasensitive aptasensor using electrospun MXene/polyvinylidene fluoride nanofiber composite for Ochratoxin A detection. Food Chemistry, 390.

Taufiqurrahman, I. and Ginta, T.L. and Ahmad, A. and Mustapha, M. and Fatmahardi, I. and Shozib, I.A. (2022) The effect of aluminum interlayer on weld strength, microstructure analysis, and welding parameters optimization in resistance spot welding of stainless steel 316L and Ti6Al4V titanium alloy. Engineering Solid Mechanics, 10 (2). pp. 165-178.

Mohammed, H.G. and Mohammed Badri Albarody, T. and Kareem Mohsin Al-Jothery, H. and Mustapha, M. and Sultan, N.M. (2022) A study of crystalline � texture and anisotropic properties of hexagonal BaFe12O19 sintered by in-situ magnetic-anisotropy spark plasma sintering (MASPS). Journal of Magnetism and Magnetic Materials, 553.

Mohammed, H.G. and Mohammed Badri Albarody, T. and Kareem Mohsin Al-Jothery, H. and Mustapha, M. and Sultan, N.M. (2022) A study of crystalline � texture and anisotropic properties of hexagonal BaFe12O19 sintered by in-situ magnetic-anisotropy spark plasma sintering (MASPS). Journal of Magnetism and Magnetic Materials, 553.

Al-Dhahebi, A.M. and Chandra Bose Gopinath, S. and Mohamed Saheed, M.S. and Mustapha, M. (2021) Detection of Ochratoxin A using Cellulose Acetate Nanofibers Modified with Silver Nanoparticle. In: UNSPECIFIED.

Al-Dhahebi, A.M. and Chandra Bose Gopinath, S. and Mohamed Saheed, M.S. and Mustapha, M. (2021) Detection of Ochratoxin A using Cellulose Acetate Nanofibers Modified with Silver Nanoparticle. In: UNSPECIFIED.

Mohammed, H.G. and Albarody, T.M.B. and Mustapha, M. and Sultan, N.M. and Al-Jothery, H.K.M. (2021) Investigate the effect of process parameters of magnetic inductively assisted spark plasma sintering (SPS) of iron oxide (Fe3O4) on microstructure behaviour - Part i. In: UNSPECIFIED.

Nguyen, V.-H. and Shahedi Asl, M. and Delbari, S.A. and Le, Q.V. and Sabahi Namini, A. and Cha, J.H. and Lee, S.-H. and Jang, H.W. and Mustapha, M. and Mohammadi, M. and Shokouhimehr, M. (2021) Microstructural evolution during spark plasma sintering of TiC�AlN�graphene ceramics. International Journal of Refractory Metals and Hard Materials, 96.

Abdullah, M.N. and Mustapha, M. and Sallih, N. and Ahmad, A. and Mustapha, F. and Dahliyanti, A. (2021) Study and use of rice husk ash as a source of aluminosilicate in refractory coating. Materials, 14 (13).

Mujahid, Y. and Sallih, N. and Mustapha, M. and Abdullah, M.Z. and Mustapha, F. (2020) Effects of processing parameters for vacuum-bagging-only method on shape conformation of laminated composites. Processes, 8 (9).

Mohammadi Dehcheshmeh, E. and Safarabadi, M. and Mousavi Mashhadi, M. and Mustapha, M. (2020) Numerical study of fatigue behavior of the aluminum 7075-t6 cantilever beam with angular cracks in different stress ratios. Engineering Solid Mechanics, 9 (1). pp. 77-92.

Baharudin, B.A. and Hussain, P. and Mustapha, M. and Ayob, F. and Ismail, A. and Ab Rahman, F. and Khalid, P.Z.M. and Hamid, D.A. and Rojan, M.A. (2020) Tensile Properties of Diffusion Bonded Duplex Stainless Steel to Low Carbon Steel. Lecture Notes in Mechanical Engineering. pp. 333-338.

Baharudin, B.A. and Hussain, P. and Mustapha, M. and Ayob, F. and Ismail, A. and Ab Rahman, F. and Khalid, P.Z.M. and Hamid, D.A. and Rojan, M.A. (2020) Tensile Properties of Diffusion Bonded Duplex Stainless Steel to Low Carbon Steel. Lecture Notes in Mechanical Engineering. pp. 333-338.

Taufiqurrahman, I. and Lenggo Ginta, T. and Mustapha, M. (2020) The effect of holding time on dissimilar resistance spot welding of stainless steel 316L and Ti6Al4V titanium alloy with aluminum interlayer. In: UNSPECIFIED.

Dzulkifli, H. and Mustapha, M. and Sallih, N. and Kakooei, S. and Mustapha, F. (2020) The effect of reaction temperature on the formation of 2H-SiC and 3C-SiC nanowhiskers. Engineering Solid Mechanics, 8 (4). pp. 381-388.

Mohammed, H.G. and Ginta, T.L. and Mustapha, M. (2020) The investigation of microstructure and mechanical properties of resistance spot welded AISI 316L austenitic stainless steel. In: UNSPECIFIED.

Husna, O.N. and Ismail, M.C. and Mustapha, M. (2019) Mechanical and anticorrosive properties of epoxy containing modified graphene Oxide hybrids. In: UNSPECIFIED.

Jie, Y.J. and Kamaruddin, S. and Mustapha, M. and Siddiquee, A.N. and Al-Ahmari, A. and Khan, Z.A. and Abidi, M.H. and Gangil, N. (2019) Reclamation of steel shots by acid leaching for powder metallurgy applications. Advances in Mechanical Engineering, 11 (7).

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Munir, K.S. and Sarfraz, M. (2018) Investigation of tip sonication effects on structural quality of graphene nanoplatelets (GNPs) for superior solvent dispersion. Ultrasonics Sonochemistry, 45. pp. 133-149.

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Munir, K.S. and Sarfraz, M. (2018) Investigation of tip sonication effects on structural quality of graphene nanoplatelets (GNPs) for superior solvent dispersion. Ultrasonics Sonochemistry, 45. pp. 133-149.

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Munir, K.S. and Sarfraz, M. (2018) Investigation of tip sonication effects on structural quality of graphene nanoplatelets (GNPs) for superior solvent dispersion. Ultrasonics Sonochemistry, 45. pp. 133-149.

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Munir, K.S. and Sarfraz, M. (2018) Investigation of tip sonication effects on structural quality of graphene nanoplatelets (GNPs) for superior solvent dispersion. Ultrasonics Sonochemistry, 45. pp. 133-149.

Puspitasari, P. and Fauzan, R. and Ginta, T.L. and Mustapha, M. and Puspitasari, D. (2018) Morphology of aluminium with nickel addition on sand casting process. Journal of Achievements in Materials and Manufacturing Engineering, 87 (1). pp. 13-17.

Puspitasari, P. and Fauzan, R. and Ginta, T.L. and Mustapha, M. and Puspitasari, D. (2018) Morphology of aluminium with nickel addition on sand casting process. Journal of Achievements in Materials and Manufacturing Engineering, 87 (1). pp. 13-17.

Puspitasari, P. and Fauzan, R. and Ginta, T.L. and Mustapha, M. and Puspitasari, D. (2018) Morphology of aluminium with nickel addition on sand casting process. Journal of Achievements in Materials and Manufacturing Engineering, 87 (1). pp. 13-17.

Baig, Z. and Mamat, O. and Mustapha, M. (2018) Recent Progress on the Dispersion and the Strengthening Effect of Carbon Nanotubes and Graphene-Reinforced Metal Nanocomposites: A Review. Critical Reviews in Solid State and Materials Sciences, 43 (1). pp. 1-46.

Baig, Z. and Mamat, O. and Mustapha, M. (2018) Recent Progress on the Dispersion and the Strengthening Effect of Carbon Nanotubes and Graphene-Reinforced Metal Nanocomposites: A Review. Critical Reviews in Solid State and Materials Sciences, 43 (1). pp. 1-46.

Baig, Z. and Mamat, O. and Mustapha, M. (2018) Recent Progress on the Dispersion and the Strengthening Effect of Carbon Nanotubes and Graphene-Reinforced Metal Nanocomposites: A Review. Critical Reviews in Solid State and Materials Sciences, 43 (1). pp. 1-46.

Puspitasari, D. and Ginta, T.L. and Mustapha, M. and Sallih, N. and Puspitasari, P. (2018) Statistical optimization of stress relieving parameters on closed cell aluminium foam using central composite design. Archives of Materials Science and Engineering, 89 (2). pp. 55-63.

Puspitasari, D. and Ginta, T.L. and Mustapha, M. and Sallih, N. and Puspitasari, P. (2018) Statistical optimization of stress relieving parameters on closed cell aluminium foam using central composite design. Archives of Materials Science and Engineering, 89 (2). pp. 55-63.

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Ali, S. and Sarfraz, M. (2018) Surfactant-decorated graphite nanoplatelets (GNPs) reinforced aluminum nanocomposites: sintering effects on hardness and wear. International Journal of Minerals, Metallurgy and Materials, 25 (6). pp. 704-715.

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Ali, S. and Sarfraz, M. (2018) Surfactant-decorated graphite nanoplatelets (GNPs) reinforced aluminum nanocomposites: sintering effects on hardness and wear. International Journal of Minerals, Metallurgy and Materials, 25 (6). pp. 704-715.

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Ali, S. and Sarfraz, M. (2018) Surfactant-decorated graphite nanoplatelets (GNPs) reinforced aluminum nanocomposites: sintering effects on hardness and wear. International Journal of Minerals, Metallurgy and Materials, 25 (6). pp. 704-715.

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Ali, S. and Sarfraz, M. (2018) Surfactant-decorated graphite nanoplatelets (GNPs) reinforced aluminum nanocomposites: sintering effects on hardness and wear. International Journal of Minerals, Metallurgy and Materials, 25 (6). pp. 704-715.

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Sarfraz, M. and Haider, S. (2018) An efficient approach to address issues of graphene nanoplatelets (GNPs) incorporation in aluminium powders and their compaction behaviour. Metals, 8 (2).

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Sarfraz, M. and Haider, S. (2018) An efficient approach to address issues of graphene nanoplatelets (GNPs) incorporation in aluminium powders and their compaction behaviour. Metals, 8 (2).

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Sarfraz, M. and Haider, S. (2018) An efficient approach to address issues of graphene nanoplatelets (GNPs) incorporation in aluminium powders and their compaction behaviour. Metals, 8 (2).

Nizam, N.F.I.A. and Sallih, N. and Puspitasari, D. and Ginta, T.L. and Mustapha, M. (2018) The influence of substrate surface energy on the adhesion compatibility of epoxy adhesive using molecular simulation tool. ARPN Journal of Engineering and Applied Sciences, 13 (8). pp. 2786-2792.

Nizam, N.F.I.A. and Sallih, N. and Puspitasari, D. and Ginta, T.L. and Mustapha, M. (2018) The influence of substrate surface energy on the adhesion compatibility of epoxy adhesive using molecular simulation tool. ARPN Journal of Engineering and Applied Sciences, 13 (8). pp. 2786-2792.

Mohd Sohor, M.A.H. and Mustapha, M. and Mamat, O. (2017) Analysis of contributing factors for synthesizing silicon carbide using Taguchi's approach. MATEC Web of Conferences, 131.

Baig, Z. and Mamat, O. and Mustapha, M. and Sarfraz, M. (2017) Influence of surfactant type on the dispersion state and properties of graphene nanoplatelets reinforced aluminium matrix nanocomposites. Fullerenes Nanotubes and Carbon Nanostructures, 25 (9). pp. 545-557.

Mohd Sohor, M.A.H. and Mustapha, M. and Chandra Kurnia, J. (2017) Silicon carbide- from synthesis to application: A review. MATEC Web of Conferences, 131.

Mohd Sohor, M.A.H. and Mustapha, M. and Mamat, O. (2017) The effect of milling duration on silicon dioxide characterization. MATEC Web of Conferences, 131.

Baig, Z. and Mamat, O. and Mustapha, M. and Altaf, K. and Mailabari, R.J. (2016) Graphene nanoplatelets (GNPS) exfoliation and dispersion in metal powder using different solvents. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12023-12028.

Yusnenti, F.M.Y. and Othman, M. and Mustapha, M. and MohdYusri, I. (2016) Silicanizing Process on Mild Steel Substrate by Using Tronoh Silica Sand: Microstructure, composition and coating growth. In: UNSPECIFIED.

Zahidah, K.A. and Kakooei, S. and Pang, M.A.S.B.M.R. and Ismail, M.C. and Eng, K.K. and Raja, P.B. and Mustapha, M. (2016) Statistical analysis of effective variable parameters on corrosion rate of X52 carbons steel. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12929-12936.

Zahidah, K.A. and Kakooei, S. and Pang, M.A.S.B.M.R. and Ismail, M.C. and Eng, K.K. and Raja, P.B. and Mustapha, M. (2016) Statistical analysis of effective variable parameters on corrosion rate of X52 carbons steel. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12929-12936.

Johari, M.I.A. and Mustapha, M. and Mamat, O. and Kakooei, S. and Ginta, T.L. and Ismadi, M.Z.P. (2016) The microstructure, physical and mechanical properties of silicon carbide with alumina and yttria as sintering additives. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13300-13304.

Mustapha, M. and Mustapha, F. and Mamat, O. and Hussain, P. (2011) Fabrication of aluminium foam through pressure assisted high frequency induction heated sintering dissolution process: an experimental observation. Powder Metallurgy, 54 (3). pp. 343-353. ISSN 1743-2901

Harahap, I.S.H. and Macam, V.R. and Mustapha, M. (2007) A new approach for structural analysis in conjunction with structural design and optimization. Platform, 5 (2). ISSN 1511-6794

Harahap, I.S.H. and Macam, V.R. and Mustapha, M. (2007) Object oriented system for dynamic domain change in structural size optimization. In: AWAM'07, 29-31 May 2007, Langkawi, Malaysia.

This list was generated on Tue Dec 24 10:47:39 2024 +08.