Items where Author is "Musarat, M.A."

Group by: Item Type | No Grouping

Jump to: Article | Conference or Workshop Item

Number of items: 99.

Article

Musarat, M.A. and Alaloul, W.S. and Hameed, N. and Dhinaharan, R. and Qureshi, A.H. and Wahab, M.M.A. (2023) Efficient Construction Waste Management: A Solution through Industrial Revolution (IR) 4.0 Evaluated by AHP. Sustainability (Switzerland), 15 (1).

Abdul Khadir, F.K.B. and Yee, N.C. and Takaijudin, H.B. and Zawawi, N.A.W.A. and Alaloul, W.S. and Musarat, M.A. (2023) Evaluation of the Implementation of Sustainable Stormwater Management Practices for Landed Residential Areas: A Case Study in Malaysia. Sustainability (Switzerland), 15 (13). ISSN 20711050

Musarat, M.A. and Alaloul, W.S. and Irfan, M. and Sreenivasan, P. and Rabbani, M.B.A. (2023) Health and Safety Improvement through Industrial Revolution 4.0: Malaysian Construction Industry Case. Sustainability (Switzerland), 15 (1).

Altaf, M. and Alaloul, W.S. and Musarat, M.A. and Qureshi, A.H. (2023) Life cycle cost analysis (LCCA) of construction projects: sustainability perspective. Environment, Development and Sustainability, 25 (11). pp. 12071-12118.

Wahab, M.M.A. and Shafiq, N. and Alaloul, W.S. and Rafiq, W. and Husna, N. and Farhan, S.A. and Ikram, T.A. and Musarat, M.A. (2023) Low-Concentration Acid Treatment of Sugarcane Bagasse with Silica Extraction for Partial Cement Replacement. Iranian Journal of Science and Technology - Transactions of Civil Engineering. ISSN 22286160

Musarat, M.A. and Sadiq, A. and Alaloul, W.S. and Abdul Wahab, M.M. (2023) A Systematic Review on Enhancement in Quality of Life through Digitalization in the Construction Industry. Sustainability (Switzerland), 15 (1). ISSN 20711050

Alaloul, W.S. and Musarat, M.A. and Haruna, S. and Tayeh, B.A. and Norizan, M.N.B. (2022) Chemical attack on concrete containing a high volume of crumb rubber as a partial replacement for fine aggregate in engineered cementitious composite (ECC). Canadian Journal of Civil Engineering, 49 (1). pp. 11-17.

Aslam, F. and Elkotb, M.A. and Iqtidar, A. and Khan, M.A. and Javed, M.F. and Usanova, K.I. and Khan, M.I. and Alamri, S. and Musarat, M.A. (2022) Compressive strength prediction of rice husk ash using multiphysics genetic expression programming. Ain Shams Engineering Journal, 13 (3).

Khanzada, F.A. and Nazir, K. and Ishtiaq, M. and Javed, M.F. and Kashif-Ur-rehman, S. and Aslam, F. and Musarat, M.A. and Usanova, K.I. (2022) Concrete by Preplaced Aggregate Method Using Silica Fume and Polypropylene Fibres. Materials, 15 (6).

Chang, Q. and Zhao, C. and Xing, L. and Ahmad, W. and Javed, M.F. and Aslam, F. and Musarat, M.A. and Vatin, N.I. (2022) Concrete filled double steel tube columns incorporating UPVC pipes under uniaxial compressive load at ambient and elevated temperature. Case Studies in Construction Materials, 16.

Noman, M. and Yaqub, M. and Abid, M. and Musarat, M.A. and Vatin, N.I. and Usman, M. (2022) Effects of Low-Cost Repair Techniques on Restoration of Mechanical Properties of Fire-Damaged Concrete. Frontiers in Materials, 8.

Altaf, M. and Alalaoul, W.S. and Musarat, M.A. and Hussain, A. and Saad, S. and Rabbani, M.B.A. and Ammad, S. (2022) Evaluating the awareness and implementation level of LCCA in the construction industry of Malaysia. Ain Shams Engineering Journal, 13 (5).

Tayeh, B.A. and Alaloul, W.S. and Alkurdi, M.H. and Abu Aisheh, Y.I. and Musarat, M.A. (2022) Evaluation of Biases in Construction Project Dispute Resolution: Case Study. Journal of Legal Affairs and Dispute Resolution in Engineering and Construction, 14 (1).

Qureshi, A.H. and Alaloul, W.S. and Wing, W.K. and Saad, S. and Alzubi, K.M. and Musarat, M.A. (2022) Factors affecting the implementation of automated progress monitoring of rebar using vision-based technologies. Construction Innovation. ISSN 14714175

Hannan Qureshi, A. and Alaloul, W.S. and Wing, W.K. and Saad, S. and Ammad, S. and Musarat, M.A. (2022) Factors impacting the implementation process of automated construction progress monitoring. Ain Shams Engineering Journal, 13 (6).

Maqsoom, A. and Mubbasit, H. and Alqurashi, M. and Shaheen, I. and Alaloul, W.S. and Musarat, M.A. and Salman, A. and Aslam, B. and Zerouali, B. and Hussein, E.E. (2022) Intrinsic workforce diversity and construction worker productivity in Pakistan: Impact of employee age and industry experience. Sustainability (Switzerland), 14 (1).

Nafees, A. and Amin, M.N. and Khan, K. and Nazir, K. and Ali, M. and Javed, M.F. and Aslam, F. and Musarat, M.A. and Vatin, N.I. (2022) Modeling of mechanical properties of silica fume-based green concrete using machine learning techniques. Polymers, 14 (1).

Khan, S. and Khan, M.A. and Zafar, A. and Javed, M.F. and Aslam, F. and Musarat, M.A. and Vatin, N.I. (2022) Predicting the ultimate axial capacity of uniaxially loaded cfst columns using multiphysics artificial intelligence. Materials, 15 (1).

Alaloul, W.S. and Alzubi, K.M. and Malkawi, A.B. and Al Salaheen, M. and Musarat, M.A. (2022) Productivity monitoring in building construction projects: a systematic review. Engineering, Construction and Architectural Management, 29 (7). pp. 2760-2785.

Rabbani, M.B.A. and Musarat, M.A. and Alaloul, W.S. and Ayub, S. and Bukhari, H. and Altaf, M. (2022) Road Accident Data Collection Systems in Developing and Developed Countries: A Review. International Journal of Integrated Engineering, 14 (1). pp. 336-352.

Shaheen, N. and Khushnood, R.A. and Musarat, M.A. and Alaloul, W.S. (2022) Self-Healing Nano-Concrete for Futuristic Infrastructures: A Review. Arabian Journal for Science and Engineering.

Shaheen, N. and Khushnood, R.A. and Musarat, M.A. and Alaloul, W.S. (2022) Self-Healing Nano-Concrete for Futuristic Infrastructures: A Review. Arabian Journal for Science and Engineering, 47 (4). pp. 5365-5375.

Murali, M. and Alaloul, W.S. and Mohammed, B.S. and Musarat, M.A. and Salaheen, M.A. and Al-Sabaeei, A.M. and Isyaka, A. (2022) Utilizing graphene oxide in cementitious composites: A systematic review. Case Studies in Construction Materials, 17.

Baarimah, A.O. and Alaloul, W.S. and Liew, M.S. and Kartika, W. and Al-Sharafi, M.A. and Musarat, M.A. and Alawag, A.M. and Qureshi, A.H. (2022) A bibliometric analysis and review of building information modelling for post-disaster reconstruction. Sustainability (Switzerland), 14 (1).

Bukhari, H. and Thaheem, M.J. and Musarat, M.A. and Alaloul, W.S. and Altaf, M. (2021) Are Pakistani construction professionals truly happy? A benchmarking approach. Ain Shams Engineering Journal.

Isleem, H.F. and Tayeh, B.A. and Alaloul, W.S. and Musarat, M.A. and Raza, A. (2021) Artificial neural network (Ann) and finite element (fem) models for gfrp-reinforced concrete columns under axial compression. Materials, 14 (23).

Javed, M.F. and Rafiq, H. and Khan, M.A. and Aslam, F. and Musarat, M.A. and Vatin, N.I. (2021) Axial behavior of concrete-filled double-skin tubular stub columns incorporating PVC pipes. Crystals, 11 (12).

Farooq, W. and Musarat, M.A. and Alaloul, W.S. and Kazmi, S.A.A. and Altaf, M. and Rabbani, M.B.A. (2021) Comparative Study of Thin-Film Perovskite Solar Cells Based on Methylammonium Lead Iodide and Methylammonium Lead Bromide. International Review of Electrical Engineering, 16 (6). pp. 587-595.

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2021) Construction machinery hire rates deviation in Malaysia: an inflation rate effect analysis. Revista de la Construccion, 20 (1). pp. 91-105.

Alaloul, W.S. and Musarat, M.A. and Rabbani, M.B.A. and Iqbal, Q. and Maqsoom, A. and Farooq, W. (2021) Construction sector contribution to economic stability: Malaysian gdp distribution. Sustainability (Switzerland), 13 (9).

Abbasi, H.A. and Johl, S.K. and Shaari, Z.B.H. and Moughal, W. and Mazhar, M. and Musarat, M.A. and Rafiq, W. and Farooqi, A.S. and Borovkov, A. (2021) Consumer motivation by using unified theory of acceptance and use of technology towards electric vehicles. Sustainability (Switzerland), 13 (21).

Abdullah, M.S. and Alaloul, W.S. and Liew, M.S. and Musarat, M.A. (2021) Delay and cost overrun of palm oil refinery construction projects: Artificial neural network (ann) model. Lecture Notes in Civil Engineering, 132. pp. 580-589.

Tjaronge, M.W. and Musarat, M.A. and Law, K. and Alaloul, W.S. and Ayub, S. (2021) Effect of graphene oxide on mechanical properties of rubberized concrete: A review. Lecture Notes in Civil Engineering, 132. pp. 484-492.

Alaloul, W.S. and Qureshi, A.H. and Musarat, M.A. and Saad, S. (2021) Evolution of close-range detection and data acquisition technologies towards automation in construction progress monitoring. Journal of Building Engineering, 43.

Alaloul, W.S. and Musarat, M.A. and Hui, C.J. (2021) Impact of elevated temperature on rubberized concrete: A review. Lecture Notes in Civil Engineering, 132. pp. 421-427.

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2021) Impact of inflation rate on construction projects budget: A review. Ain Shams Engineering Journal, 12 (1). pp. 407-414.

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2021) Inflation rate and laboursâ�� wages in construction projects: economic relation investigation. Engineering, Construction and Architectural Management.

Alaloul, W.S. and Musarat, M.A. and Liew, M.S. and Qureshi, A.H. and Maqsoom, A. (2021) Investigating the impact of inflation on labour wages in Construction Industry of Malaysia. Ain Shams Engineering Journal, 12 (2). pp. 1575-1582.

Imtiaz, L. and Kashif-Ur-rehman, S. and Alaloul, W.S. and Nazir, K. and Javed, M.F. and Aslam, F. and Musarat, M.A. (2021) Life cycle impact assessment of recycled aggregate concrete, geopolymer concrete, and recycled aggregate-based geopolymer concrete. Sustainability (Switzerland), 13 (24).

Bukhari, H. and Alaloul, W.S. and Musarat, M.A. and Akram, S. and Tabassum, I. and Altaf, M. (2021) Materializing low-cost energy-efficient residential utility through effective space design and masonry technique-a practical approach. Civil Engineering and Architecture, 9 (2). pp. 357-374.

Alaloul, W.S. and Musarat, M.A. and Haruna, S. and Law, K. and Tayeh, B.A. and Rafiq, W. and Ayub, S. (2021) Mechanical properties of silica fume modified high-volume fly ash rubberized self-compacting concrete. Sustainability (Switzerland), 13 (10).

Rafiq, W. and Napiah, M. and Habib, N.Z. and Sutanto, M.H. and Alaloul, W.S. and Khan, M.I. and Musarat, M.A. and Memon, A.M. (2021) Modeling and design optimization of reclaimed asphalt pavement containing crude palm oil using response surface methodology. Construction and Building Materials, 291.

Alaloul, W.S. and Musarat, M.A. and Shawn, L.E. and Al-Yacouby, A.M. and Toloue, I. and Rafiq, W. and Farooq, W. (2021) Multi-nozzle abrasive water jet for oil and gas platforms decommissioning: A review. Civil Engineering and Architecture, 9 (6). pp. 2062-2076.

Farooq, W. and Musarat, M.A. and Iqbal, J. and Kazmi, S.A.A. and Khan, A.D. and Alaloul, W.S. and Baarimah, A.O. and Elnaggar, A.Y. and Ghoneim, S.S.M. and Ghaly, R.N.R. (2021) Optimized thin-film organic solar cell with enhanced efficiency. Sustainability (Switzerland), 13 (23).

Alaloul, W.S. and Alzubi, K.M. and Malkawi, A.B. and Al Salaheen, M. and Musarat, M.A. (2021) Productivity monitoring in building construction projects: a systematic review. Engineering, Construction and Architectural Management.

Khalid, H. and Thaheem, M.J. and Malik, M.S.A. and Musarat, M.A. and Alaloul, W.S. (2021) Reducing cooling load and lifecycle cost for residential buildings: a case of Lahore, Pakistan. International Journal of Life Cycle Assessment, 26 (12). pp. 2355-2374.

Jaya, I. and Alaloul, W.S. and Musarat, M.A. (2021) Role of inflation in construction: A systematic review. Lecture Notes in Civil Engineering, 132. pp. 701-708.

Alaloul, W.S. and Altaf, M. and Musarat, M.A. and Javed, M.F. and Mosavi, A. (2021) Systematic review of life cycle assessment and life cycle cost analysis for pavement and a case study. Sustainability (Switzerland), 13 (8).

Bangash, K.A. and Kazmi, S.A.A. and Farooq, W. and Ayub, S. and Musarat, M.A. and Alaloul, W.S. and Javed, M.F. and Mosavi, A. (2021) Thickness optimization of thin-film tandem organic solar cell. Micromachines, 12 (5).

Alaloul, W.S. and Musarat, M.A. and Liew, M.S. and Zawawi, N.A.W.A. (2020) Influential Safety Performance and Assessment in Construction Projects: A Review. Lecture Notes in Civil Engineering, 53. pp. 719-728.

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. and Maqsoom, A. and Qureshi, A.H. (2020) Investigating the impact of inflation on building materials prices in construction industry. Journal of Building Engineering, 32.

Rafiq, W. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Zabri, Z.N.B. and Khan, M.I. and Musarat, M.A. (2020) Investigation on hamburg wheel-tracking device stripping performance properties of recycled hot-mix asphalt mixtures. Materials, 13 (21). pp. 1-15.

Alaloul, W.S. and John, V.O. and Musarat, M.A. (2020) Mechanical and Thermal Properties of Interlocking Bricks Utilizing Wasted Polyethylene Terephthalate. International Journal of Concrete Structures and Materials, 14 (1).

Conference or Workshop Item

Al-Awag, A.M. and Alaloul, W.S. and Liew, M.S. and Baarimah, A.O. and Musarat, M.A. (2023) The potential role of industrialized building systems (IBS) in Malaysian sustainable construction: Awareness and barriers. In: UNSPECIFIED.

Alzubi, K.M. and Salah Alaloul, W. and Al Salaheen, M. and Hannan Qureshi, A. and Musarat, M.A. and Mohsen Alawag, A. (2022) Reviewing the Applications of Internet of Things in Construction Projects. In: UNSPECIFIED.

Alzubi, K.M. and Alaloul, W.S. and Salaheen, M.A. and Qureshi, A.H. and Musarat, M.A. and Baarimah, A.O. (2021) Automated Monitoring for Construction Productivity Recognition. In: UNSPECIFIED.

Musarat, M.A. and Altaf, M. and Rabbani, M.B.A. and Alaloul, W.S. and Alzubi, K.M. and Al Salaheen, M. (2021) Automation in Traffic Engineering to Prevent Road Accidents: A Review. In: UNSPECIFIED.

Musarat, M.A. and Alaloul, W.S. and Ayub, S. and Rabbani, M.B.A. and Farooq, W. and Altaf, M. (2021) Chemical and Physical Behavior of Rubberized Concrete: A Review. In: UNSPECIFIED.

Baarimah, A.O. and Alaloul, W.S. and Liew, M.S. and Alawag, A.M. and Musarat, M.A. and Alzubi, K.M. (2021) Current State of Post-Disaster Reconstruction Projects: A Bibliometric Analysis. In: UNSPECIFIED.

Musarat, M.A. and Hameed, N. and Altaf, M. and Alaloul, W.S. and Salaheen, M.A. and Alawag, A.M. (2021) Digital Transformation of the Construction Industry: A Review. In: UNSPECIFIED.

Maqsoom, A. and Arif, U. and Aslam, I. and Musarat, M.A. and Alaloul, W.S. and Baarimah, A.O. (2021) Green Human Resource Practices on Pro-environmental behaviour of workers: Case of Pakistani construction industry. In: UNSPECIFIED.

Bukhari, H. and Musarat, M.A. and Alaloul, W.S. and Riaz, M. (2021) Hempcrete as a Sustainable Building Material: A Review. In: UNSPECIFIED.

Musarat, M.A. and Altaf, M. and Hameed, N. and Alaloul, W.S. and Baarimah, A.O. and Alzubi, K.M. (2021) Impact of Communication on Site Accidents Prevention: A Review. In: UNSPECIFIED.

Mohsen, A. and Alaloul, W.S. and Liew, M.S. and Musarat, M.A. and Baarimah, A.O. and Alzubi, K.M. and Altaf, M. (2021) Impact of the COVID-19 Pandemic on Construction Industry in Malaysia. In: UNSPECIFIED.

Rabbani, M.B.A. and Usama, U. and Musarat, M.A. and Alaloul, W.S. (2021) Indicators of injury severity of truck crashes using random parameter logit modeling. In: UNSPECIFIED.

Baarimah, A.O. and Alaloul, W.S. and Liew, M.S. and Al-Aidrous, A.-H.M.H. and Alawag, A.M. and Musarat, M.A. (2021) Integration of Building Information Modeling (BIM) and Value Engineering in Construction Projects: A Bibliometric Analysis. In: UNSPECIFIED.

Musarat, M.A. and Hameed, N. and Alaloul, W.S. and Altaf, M. and Rafiq, W. and Rabbani, M.B.A. and Alzubi, K.M. (2021) Role of automation in site accidents avidness in the construction industry: A Review. In: UNSPECIFIED.

Altaf, M. and Alaloul, W.S. and Khan, S. and Liew, M.S. and Musarat, M.A. and Mohsen, A.A. (2021) Value Analysis in Construction Projects with BIM implementation: A Systematic Review. In: UNSPECIFIED.

Altaf, M. and Alaloul, W.S. and Musarat, M.A. and Bukhari, H. and Saad, S. and Ammad, S. (2020) BIM Implication of Life Cycle Cost Analysis in Construction Project: A Systematic Review. In: UNSPECIFIED.

Maqsoom, A. and Arif, U. and Ejaz, A. and Musarat, M.A. and Aslam, I. and Zubair, S. (2020) Factors influencing the Pro-Environmental Behavior of Construction Workers. In: UNSPECIFIED.

Qureshi, A.H. and Alaloul, W.S. and Manzoor, B. and Musarat, M.A. and Saad, S. and Ammad, S. (2020) Implications of Machine Learning Integrated Technologies for Construction Progress Detection under Industry 4.0 (IR 4.0). In: UNSPECIFIED.

Maqsoom, A. and Khan, K. and Musarat, M.A. and Mubasit, H. and Shaheen, I. (2020) Influence of External Workforce Diversity Factors on Labor Productivity in Construction Projects: Empirical Evidence from Pakistan. In: UNSPECIFIED.

Maqsoom, A. and Khan, K. and Musarat, M.A. and Mubasit, H. and Umer, M. (2020) Influence of Internal Workforce Diversity Factors on Labor Productivity in Construction Projects: Empirical Evidence from Pakistan. In: UNSPECIFIED.

Rafiq, W. and Humair, M. and Napiah, M.B. and Sutanto, M.H. and Musarat, M.A. and Memon, A.M. (2020) Performance Evaluation of Rutting and Moisture Damage containing Warm Mix Asphalt Mixtures with Recycled Asphalt pavement. In: UNSPECIFIED.

Bukhari, H. and Musarat, M.A. and Alaloul, W.S. (2020) Rat Trap Bond: A state of review. In: UNSPECIFIED.

This list was generated on Fri Nov 22 16:22:47 2024 +08.