Items where Author is "Altaf, K."

Gebremedhen, H.S. and Woldemichael, D.E. and Hashim, F.M. and Altaf, K. and Chong, H.C. (2023) Effect of Filtering Techniques in Manufacturing of Optimal Topologies Using Additive Manufacturing. Green Energy and Technology. pp. 167-177. ISSN 18653529

Fayyaz, M.S. and Abbasi, A.Z. and Altaf, K. and Alqahtani, N. and Ting, D.H. (2023) Not inspired enough: the mediating role of customer engagement between YouTube�s perceived advertising value and customer inspiration. Kybernetes. ISSN 0368492X

Ahmad, A. and Abbas, A. and Hussain, G. and Al-Abbasi, O. and Alkahtani, M. and Altaf, K. (2023) Performance evaluation of 3D printed polymer heat exchangers: influence of printing temperature, printing speed and wall thickness with consideration of surface roughness. International Journal of Advanced Manufacturing Technology, 128 (7-8). pp. 3627-3647. ISSN 02683768

Qayyum, H. and Hussain, G. and Sulaiman, M. and Hassan, M. and Ali, A. and Muhammad, R. and Wei, H. and Shehbaz, T. and Aamir, M. and Altaf, K. (2022) Effect of Raster Angle and Infill Pattern on the In-Plane and Edgewise Flexural Properties of Fused Filament Fabricated Acrylonitrile�Butadiene�Styrene. Applied Sciences (Switzerland), 12 (24). ISSN 20763417

Hassan, F. and Jamil, F. and Hussain, A. and Ali, H.M. and Janjua, M.M. and Khushnood, S. and Farhan, M. and Altaf, K. and Said, Z. and Li, C. (2022) Recent advancements in latent heat phase change materials and their applications for thermal energy storage and buildings: A state of the art review. Sustainable Energy Technologies and Assessments, 49.

Hassan, F. and Jamil, F. and Hussain, A. and Ali, H.M. and Janjua, M.M. and Khushnood, S. and Farhan, M. and Altaf, K. and Said, Z. and Li, C. (2022) Recent advancements in latent heat phase change materials and their applications for thermal energy storage and buildings: A state of the art review. Sustainable Energy Technologies and Assessments, 49.

Altaf, K. and Tariq, A. and Ahmad, S.W. and Hussain, G. and Ratlamwala, T.A.H. and Ali, H.M. (2022) Thermal and hydraulic analysis of slotted plate fins heat sinks using numerical and experimental techniques. Case Studies in Thermal Engineering, 35.

Altaf, K. and Tariq, A. and Ahmad, S.W. and Hussain, G. and Ratlamwala, T.A.H. and Ali, H.M. (2022) Thermal and hydraulic analysis of slotted plate fins heat sinks using numerical and experimental techniques. Case Studies in Thermal Engineering, 35.

Tariq, A. and Altaf, K. and Ahmad, S.W. and Hussain, G. and Ratlamwala, T.A.H. (2021) Comparative numerical and experimental analysis of thermal and hydraulic performance of improved plate fin heat sinks. Applied Thermal Engineering, 182.

Ahmed, S.W. and Hussain, G. and Al-Ghamdi, K.A. and Altaf, K. (2021) Mechanical properties of an additive manufactured CF-PLA/ABS hybrid composite sheet. Journal of Thermoplastic Composite Materials, 34 (11). pp. 1577-1596.

Tariq, A. and Altaf, K. and Hussain, G. and Reezwan, M. (2021) Plate fin heat sink for the application in solar thermal power. Green Energy and Technology. pp. 115-131.

Ahmed, S.W. and Hussain, G. and Altaf, K. and Ali, S. and Alkahtani, M. and Abidi, M.H. and Alzabidi, A. (2020) On the effects of process parameters and optimization of interlaminate bond strength in 3D printed ABS/CF-PLA composite. Polymers, 12 (9).

Ali, A. and Nasir, M.A. and Khalid, M.Y. and Nauman, S. and Shaker, K. and Khushnood, S. and Altaf, K. and Zeeshan, M. and Hussain, A. (2019) Experimental and numerical characterization of mechanical properties of carbon/jute fabric reinforced epoxy hybrid composites. Journal of Mechanical Science and Technology, 33 (9). pp. 4217-4226.

Ali, S. and Abdul Rani, A.M. and Altaf, K. and Hussain, P. and Prakash, C. and Hastuty, S. and Rao, T.V.V.L.N. and Aliyu, A.�A.A. and Subramaniam, K. (2019) Investigation of alloy composition and sintering parameters on the corrosion resistance and microhardness of 316L stainless steel alloy. Lecture Notes in Mechanical Engineering. pp. 532-541. ISSN 21954356

Ali, S. and Abdul Rani, A.M. and Altaf, K. and Hussain, P. and Prakash, C. and Hastuty, S. and Rao, T.V.V.L.N. and Aliyu, A.�A.A. and Subramaniam, K. (2019) Investigation of alloy composition and sintering parameters on the corrosion resistance and microhardness of 316L stainless steel alloy. Lecture Notes in Mechanical Engineering. pp. 532-541.

Ali, S. and Abdul Rani, A.M. and Altaf, K. and Hussain, P. and Prakash, C. and Hastuty, S. and Rao, T.V.V.L.N. and Aliyu, A.�A.A. and Subramaniam, K. (2019) Investigation of alloy composition and sintering parameters on the corrosion resistance and microhardness of 316L stainless steel alloy. Lecture Notes in Mechanical Engineering. pp. 532-541.

Ali, S. and Abdul Rani, A.M. and Altaf, K. and Hussain, P. and Prakash, C. and Hastuty, S. and Rao, T.V.V.L.N. and Aliyu, A.�A.A. and Subramaniam, K. (2019) Investigation of alloy composition and sintering parameters on the corrosion resistance and microhardness of 316L stainless steel alloy. Lecture Notes in Mechanical Engineering. pp. 532-541.

Azam, F.I. and Abdul Rani, A.M. and Altaf, K. and Rao, T.V.V.L.N. and Zaharin, H.A. (2018) An In-Depth Review on Direct Additive Manufacturing of Metals. IOP Conference Series: Materials Science and Engineering, 328 (1).

Ali, S. and Rani, A.M.A. and Altaf, K. and Baig, Z. (2018) Investigation of Boron addition and compaction pressure on the compactibility, densification and microhardness of 316L Stainless Steel. IOP Conference Series: Materials Science and Engineering, 344 (1).

Altaf, K. and Qayyum, J.A. and Rani, A.M.A. and Ahmad, F. and Megat-Yusoff, P.S.M. and Baharom, M. and Aziz, A.R.A. and Jahanzaib, M. and German, R.M. (2018) Performance analysis of enhanced 3D printed polymer molds for metal injection molding process. Metals, 8 (6).

Altaf, K. and Qayyum, J.A. and Rani, A.M.A. and Ahmad, F. and Megat-Yusoff, P.S.M. and Baharom, M. and Aziz, A.R.A. and Jahanzaib, M. and German, R.M. (2018) Performance analysis of enhanced 3D printed polymer molds for metal injection molding process. Metals, 8 (6).

Altaf, K. and Zulkarnain, A.F. and Qayyum, J.A. and Jahanzaib, M. (2017) Optimum build orientation OF3D printed parts for a robot gripper. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5772-5777.

Altaf, K. and Rani, A.M.A. and Woldemichael, D.E. and Lemma, T.A. and Jian, C.Z. and Fiqri, M.H. (2016) Application of additive manufacturing/3D printing technologies and investment casting for prototype development of polycrystalline diamond compact (PDC) drill bit body. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6514-6518.

Altaf, K. and Rani, A.M.A. and Woldemichael, D.E. and Lemma, T.A. and Jian, C.Z. and Fiqri, M.H. (2016) Application of additive manufacturing/3D printing technologies and investment casting for prototype development of polycrystalline diamond compact (PDC) drill bit body. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6514-6518.

Altaf, K. and Abdul Rani, A.M. and Ahmad, F. and Baharom, M. and Raghavan, V.R. (2016) Determining the effects of thermal conductivity on epoxy molds using profiled cooling channels with metal inserts. Journal of Mechanical Science and Technology, 30 (11). pp. 4901-4907.

Qayyum, J.A. and Altaf, K. and Mahmood, A. and Shah, M. and Rani, A.M.A. (2016) Grain refinement of LM25 Aluminum alloy casting using sloping plate process. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13049-13052.

Qayyum, J.A. and Altaf, K. and Mahmood, A. and Shah, M. and Rani, A.M.A. (2016) Grain refinement of LM25 Aluminum alloy casting using sloping plate process. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13049-13052.

Baig, Z. and Mamat, O. and Mustapha, M. and Altaf, K. and Mailabari, R.J. (2016) Graphene nanoplatelets (GNPS) exfoliation and dispersion in metal powder using different solvents. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12023-12028.

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Altaf, K. and Omar, M.A. and Abdul Khalil, H.P.S. and Raza, M.R. (2016) Investigation of Rheological Behavior of Low Pressure Injection Molded Stainless Steel Feedstocks. Advances in Materials Science and Engineering, 2016.

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Altaf, K. and Omar, M.A. and Rafi Raza, M. (2016) Low pressure injection molding of boron admixed 316l stainless steel for engineering applications. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11960-11965.

Altaf, K. and Rani, A.M.A. and Ahmad, F. and Aslam, M. (2016) Rapid tooling for powder injection moulding process. In: UNSPECIFIED.

Ahmad, F. and Aslam, M. and Altaf, K. and Shirazi, I. (2015) Effects of mold geometry on fiber orientation of powder injection molded metal matrix composites. In: UNSPECIFIED.

Woldemichael, D.E. and Abdul Rani, A.M. and Lemma, T.A. and Altaf, K. (2015) Numerical simulation of rock cutting using 2D AUTODYN. In: UNSPECIFIED.

Woldemichael, D.E. and Abdul Rani, A.M. and Lemma, T.A. and Altaf, K. (2015) Numerical simulation of rock cutting using 2D AUTODYN. In: UNSPECIFIED.

Altaf, K. and Rani, A.M.B.A. (2015) Numerical study of profiled conformal cooling channels for cooling time reduction in injection mould tools. International Journal of Engineering Systems Modelling and Simulation, 7 (4). pp. 230-237.

Altaf, K. and Rani, A.M.B.A. (2015) Numerical study of profiled conformal cooling channels for cooling time reduction in injection mould tools. International Journal of Engineering Systems Modelling and Simulation, 7 (4). pp. 230-237.

Ahmad, M.A.R. and Nasiruddin, Z.R. and Rao, T.V.V.L.N. and Altaf, K. (2014) Overcoming limitation in DFM using layer manufacturing. Applied Mechanics and Materials, 660. pp. 94-98.

Altaf, K. and Rani, A.M.A. (2014) Thermal conductivity augmentation of epoxy injection moulds for cooling time reduction. In: UNSPECIFIED.