Items where Author is "Ali, S."

Group by: Item Type | No Grouping

Number of items: 56.

Shahed, C.A. and Ahmad, F. and GÃ¼nister, E. and Foudzi, F.M. and Ali, S. and Malik, K. and Harun, W.S.W. (2023) Antibacterial mechanism with consequent cytotoxicity of different reinforcements in biodegradable magnesium and zinc alloys: A review. Journal of Magnesium and Alloys.

Hastuty, S. and Saputra, F.R.A. and Ryandwita, B.W. and Awwaluddin, M. and Kartaman, M. and Yanlinastuti and Widharyanti, I.D. and Dahliyanti, A. and Oktaviano, H.S. and Ali, S. and Aliyu, A.â��A.A. and Abdul-Rani, A.M. and Yadav, A.P. (2023) Corrosion Resistance Enhancement of Stainless Steel Powder Metallurgy in Artificial Body Fluids by Reinforcement of Boron and Niobium. Lecture Notes in Mechanical Engineering. pp. 839-850. ISSN 21954356

Aliyu, A.A. and Abdul-Rani, A.M. and Al-Amin, M. and Hastuty, S. and Razak, M.A. and Ali, S. and Danish, M. and Rubaiee, S. and Bin Mahfouz, A. and Hamza, A.N. (2023) Deposition of biomimetic biocompatible oxides on metallic glass surface by electro-discharge coating process Abscheidung biomimetischer biokompatibler Oxide auf metallischen GlasoberflÃ¤chen durch elektrische Entladungsbeschichtung. Materialwissenschaft und Werkstofftechnik, 54 (1). pp. 129-136.

Ali, S. and Ahmad, F. and Yusoff, P.S.M.M. and Muhamad, N. and Haider, W. and Malik, K. and Shahed, C.A. (2023) Interface and mechanical properties of graphene/copper composite with sonication induced Au decoration of graphene. Powder Technology, 430. ISSN 00325910

Malik, K. and Ahmad, F. and Yunus, N.A. and Gunister, E. and Ali, S. and Raza, A. (2023) Physical and mechanical properties of kenaf/flax hybrid composites. Journal of Applied Polymer Science, 140 (5).

Subramanim, K. and Sriraman and Amirtham, V. and Rani, A.M.A. and Ali, S. and Perumal, T. (2023) Review of Current Development of Knee Rehabilitation Device Using Series Elastic Actuator (SEA). Lecture Notes in Mechanical Engineering. pp. 965-980. ISSN 21954356

Raza, A. and Ahmad, F. and Badri, T.M. and Raza, M.R. and Malik, K. and Ali, S. (2023) Selection of Materials Based on Thermo-Mechanical Properties of Thermal Barrier Coatings and Their Failuresâ��A Review. Lecture Notes in Mechanical Engineering. pp. 255-264.

Ali, M.A. and Ting, D.H. and Isha, A.S.N. and Ahmad-Ur-Rehman, M. and Ali, S. (2022) Does service recovery matter? Relationships among perceived recovery justice, recovery satisfaction and customer affection and repurchase intentions: the moderating role of gender. Journal of Asia Business Studies.

Ali, S. and Ahmad, F. and Shirazi, M.I. and Malik, K. and Raza, M.R. and Memon, I.R. (2022) Flow induced fiber orientation in short carbon fiber reinforced copper matrix composites. Materials Today Communications, 33.

Ali, S. and Irfan, M. and Niazi, U.M. and Rani, A.M.A. and Rashedi, A. and Rahman, S. and Khan, M.K.A. and Alsaiari, M.A. and Legutko, S. and PetrÅ¯, J. and Trefil, A. (2022) Microstructure and Mechanical Properties of Modified 316L Stainless Steel Alloy for Biomedical Applications Using Powder Metallurgy. Materials, 15 (8).

Malik, K. and Ahmad, F. and Yunus, N.A. and Gunister, E. and Ali, S. and Raza, A. (2022) Physical and mechanical properties of kenaf/flax hybrid composites. Journal of Applied Polymer Science.

Naseer, A. and Ahmad, F. and Ali, S. and Haider, W. (2022) Powder injection molded nano copper oxide grafted graphene reinforced copper matrix composites. Powder Technology, 397.

Al-Amin, M. and Abdul-Rani, A.M. and Danish, M. and Zohura, F.T. and Rubaiee, S. and Ahmed, R. and Ali, S. and Sarikaya, M. (2021) Analysis of hybrid HA/CNT suspended-EDM process and multiple-objectives optimization to improve machining responses of 316L steel. Journal of Materials Research and Technology, 15. pp. 2557-2574.

Ali, M.A. and Ting, D.H. and Ahmad-ur-Rahman, M. and Ali, S. and Shear, F. and Mazhar, M. (2021) Effect of Online Reviews and Crowd Cues on Restaurant Choice of Customer: Moderating Role of Gender and Perceived Crowding. Frontiers in Psychology, 12.

Al-Amin, M. and Abdul-Rani, A.M. and Danish, M. and Rubaiee, S. and Mahfouz, A.B. and Thompson, H.M. and Ali, S. and Unune, D.R. and Sulaiman, M.H. (2021) Investigation of coatings, corrosion and wear characteristics of machined biomaterials through hydroxyapatite mixed-edm process: A review. Materials, 14 (13).

Mohd Johari, S.A. and Mahad Nasir, M.M. and Ali, S. and Hamza, A. and Aleem, W. and Ameen, M. and Aqsha, A. (2021) Recent Technology Developments in Biogas Production from Waste Materials in Malaysia. ChemBioEng Reviews, 8 (6). pp. 564-592.

Malik, K. and Ahmad, F. and Gunister, E. and Nakato, T. and Mouri, E. and Muhammad, M.B. and Ali, S. (2021) A Review of Flax Fiber Reinforced Thermoset Polymer Composites: Structure and Mechanical Performance. Journal of Natural Fibers.

Malik, K. and Ahmad, F. and Yunus, N.A. and Gunister, E. and Nakato, T. and Mouri, E. and Ali, S. (2021) A Review of Flax Fiber Reinforced Thermoset Polymer Composites: Thermal-Physical Properties, Improvements and Application. Journal of Natural Fibers.

Ali, S. and Ahmad, F. and Yusoff, P.S.M.M. and Muhamad, N. and OÃ±ate, E. and Raza, M.R. and Malik, K. (2021) A review of graphene reinforced Cu matrix composites for thermal management of smart electronics. Composites Part A: Applied Science and Manufacturing, 144.

Ali, S. and Abdul Rani, A.M. and Baig, Z. and Ahmed, S.W. and Hussain, G. and Subramaniam, K. and Hastuty, S. and Rao, T.V.V.L.N. (2020) Biocompatibility and corrosion resistance of metallic biomaterials. Corrosion Reviews, 38 (5). pp. 381-402.

Ahmed, S.W. and Hussain, G. and Altaf, K. and Ali, S. and Alkahtani, M. and Abidi, M.H. and Alzabidi, A. (2020) On the effects of process parameters and optimization of interlaminate bond strength in 3D printed ABS/CF-PLA composite. Polymers, 12 (9).

Sajid, Z. and Ismail, M.S. and Hanif, T. and Tsegab, H. and Ali, S. and Ahmed, N. (2020) Sedimentary Characteristics, Xrd, Ftir, Uv-Vis And Rock-Eval Pyrolysis of Black Shale Intervals of the Semantan Formation, Peninsular Malaysia. ARPN Journal of Engineering and Applied Sciences, 15 (23). pp. 2778-2792.

Rashid, M.H. and Farrukh, S. and Javed, S. and Hussain, A. and Fan, X. and Ali, S. and Ayoub, M. (2020) Synthesis and gas permeation analysis of TiO2 nanotube-embedded cellulose acetate mixed matrix membranes. Chemical Papers, 74 (3). pp. 821-828.

Aliyu, A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Rao, T.V.V.L. and Axinte, E. and Ali, S. and Ramli, M.N. (2019) Hydroxyapatite electro discharge coating of Zr-based bulk metallic glass for potential orthopedic application. Key Engineering Materials, 796. pp. 123-128.

Ali, S. and Abdul Rani, A.M. and Altaf, K. and Hussain, P. and Prakash, C. and Hastuty, S. and Rao, T.V.V.L.N. and Aliyu, A.â��A.A. and Subramaniam, K. (2019) Investigation of alloy composition and sintering parameters on the corrosion resistance and microhardness of 316L stainless steel alloy. Lecture Notes in Mechanical Engineering. pp. 532-541. ISSN 21954356

Aliyu, A.â��A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Prakash, C. and Rao, T.V.V.L.N. and Axinte, E. and Ali, S. (2019) Synthesis and characterization of bioceramic oxide coating on Zr-Ti-Cu-Ni-Be BMG by electro discharge process. Lecture Notes in Mechanical Engineering. pp. 518-531.

Ali, S. and Rani, A.M.A. and Altaf, K. and Baig, Z. (2018) Investigation of Boron addition and compaction pressure on the compactibility, densification and microhardness of 316L Stainless Steel. IOP Conference Series: Materials Science and Engineering, 344 (1).

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Ali, S. and Sarfraz, M. (2018) Surfactant-decorated graphite nanoplatelets (GNPs) reinforced aluminum nanocomposites: sintering effects on hardness and wear. International Journal of Minerals, Metallurgy and Materials, 25 (6). pp. 704-715.

Mohd Zabidi, N.A. and Tuan Sulong, T.S. and Ali, S. (2018) Synthesis and characterization of Cu/ZnO catalyst on carbon nanotubes and Al2O3 supports. Materials Science Forum, 916 MS. pp. 139-143.

Ali, S. and Zabidi, N.A.M. and Al-Marri, M.J. and Khader, M.M. (2017) Effect of the support on physicochemical properties and catalytic performance of cobalt based nano-catalysts in Fischer-Tropsch reaction. Materials Today Communications, 10. pp. 67-71.

Mohd Zabidi, N.A. and Pilus, R. and Rahman, S. and Ali, S. (2014) Characterisation of Co/Mn catalysts synthesised via reverse microemulsion method. Materials Research Innovations, 18. S6-477-S6-479.

Ousta, F. and Kamel, N. and Yusoff, M.Z. and Ali, S. (2014) Mapping QoS classes in loose coupling heterogeneous networks. Research Journal of Applied Sciences, Engineering and Technology, 8 (16). pp. 1777-1780.

Ousta, F. and Yusoff, M.Z. and Kamel, N. and Ali, S. (2014) QoS evolution in 3GPP mobile networks. Research Journal of Applied Sciences, Engineering and Technology, 8 (2). pp. 153-159.

Ali, S. and Mohd Zabidi, N.A. and Abdul Aziz, M.A. and Ahmad, K. and Sidik, M.I. and Muin, M.A. (2013) Effects of synthesis technique on the physical properties of co-fe nanoparticles on cnts support. Malaysian Journal of Microscopy, 9 (1). pp. 47-51.

Ali, S. and Zabidi, N.A.M. and Aziz, M.A.A. and Ahmad, K. and Sidik, M.I. and Muin, M.A. (2013) Effects of synthesis technique on the physical properties of co-fe nanoparticles on cnts support. Malaysian Journal of Microscopy, 9 (1). pp. 5-9.

Ali, S. and Mohd Zabidi, N. A. and Subbarao, D (2012) Effect of Potassium Promoter on Cobalt Nano-catalysts for Fischer-Tropsch Reaction. In: UNSPECIFIED.

Mohd Zabidi, N. A. and Abdul Aziz, M. N. A. and Ali, S. and Taha, M. F. (2012) Synthesis and Characterization of Fe-Co Catalyst Prepared via Reverse Microemulsion Method. In: UNSPECIFIED.

Ali, S. and Mohd Zabidi, N. A. and Subbarao, D. (2012) Synthesis and characterization of γ-alumina supported cobalt and iron nanocatalysts. Advanced Materials Research, 545. pp. 129-136. ISSN 1662-8985

Ali, S. and Mohd Zabidi, N. A. and Subbarao, D. (2012) Effect of niobium promoter on iron-based catalyst for Fischer-Tropsch reaction. [Citation Index Journal]

Halim, N and Ali, S. and Nadeem, M and Abdul Hamid, P and Isa, M Tan (2012) Synthesis of wax inhibition and assessment of squeeze technique allocation for Malaysian waxy crude. [Citation Index Journal]

Ali, S. and Mohd Zabidi, N. A. (2011) Correlation between Fischer-Tropsch catalytic activity and composition of catalysts. [Citation Index Journal]

Ali, S. and Mohd Zabidi, N. A. and Subbarao, D. (2011) Development of niobium-promoted cobalt catalysts on carbon nanotubes for Fischer-Tropsch synthesis. [Citation Index Journal]

Ali, S. and Mohd Zabidi, N. A. and Subbarao, D. (2011) Synthesis and Characterization of Cobalt-Based Nanocatalysts: Effect of Supports. In: 2nd International Conference on Nanotechnology: Fundamentals and Applications, 27-29 July 2011, Ottawa, Canada.

This list was generated on Tue Dec 24 02:35:29 2024 +08.