Items where Author is "Alaloul, W.S."

Group by: Item Type | No Grouping
Number of items: 140.

Article

Musarat, M.A. and Alaloul, W.S. and Hameed, N. and Dhinaharan, R. and Qureshi, A.H. and Wahab, M.M.A. (2023) Efficient Construction Waste Management: A Solution through Industrial Revolution (IR) 4.0 Evaluated by AHP. Sustainability (Switzerland), 15 (1).

Qureshi, A.H. and Alaloul, W.S. and Hussain, S.J. and Murtiyoso, A. and Saad, S. and Alzubi, K.M. and Ammad, S. and Baarimah, A.O. (2023) Evaluation of Photogrammetry Tools following Progress Detection of Rebar towards Sustainable Construction Processes. Sustainability (Switzerland), 15 (1). ISSN 20711050

Abdul Khadir, F.K.B. and Yee, N.C. and Takaijudin, H.B. and Zawawi, N.A.W.A. and Alaloul, W.S. and Musarat, M.A. (2023) Evaluation of the Implementation of Sustainable Stormwater Management Practices for Landed Residential Areas: A Case Study in Malaysia. Sustainability (Switzerland), 15 (13). ISSN 20711050

Musarat, M.A. and Alaloul, W.S. and Irfan, M. and Sreenivasan, P. and Rabbani, M.B.A. (2023) Health and Safety Improvement through Industrial Revolution 4.0: Malaysian Construction Industry Case. Sustainability (Switzerland), 15 (1).

Alaloul, W.S. and Heng, L.J. and Qureshi, A.H. (2023) Last Planner System (LPS) Themed Framework for Effective Application of Industrialized Building System (IBS). Arabian Journal for Science and Engineering, 48 (10). pp. 13377-13393. ISSN 2193567X

Altaf, M. and Alaloul, W.S. and Musarat, M.A. and Qureshi, A.H. (2023) Life cycle cost analysis (LCCA) of construction projects: sustainability perspective. Environment, Development and Sustainability, 25 (11). pp. 12071-12118.

Wahab, M.M.A. and Shafiq, N. and Alaloul, W.S. and Rafiq, W. and Husna, N. and Farhan, S.A. and Ikram, T.A. and Musarat, M.A. (2023) Low-Concentration Acid Treatment of Sugarcane Bagasse with Silica Extraction for Partial Cement Replacement. Iranian Journal of Science and Technology - Transactions of Civil Engineering. ISSN 22286160

Wahab, M.M.A. and Shafiq, N. and Alaloul, W.S. and Rafiq, W. and Husna, N. and Farhan, S.A. and Ikram, T.A. and Musarat, M.A. (2023) Low-Concentration Acid Treatment of Sugarcane Bagasse with Silica Extraction for Partial Cement Replacement. Iranian Journal of Science and Technology - Transactions of Civil Engineering. ISSN 22286160

Musarat, M.A. and Sadiq, A. and Alaloul, W.S. and Abdul Wahab, M.M. (2023) A Systematic Review on Enhancement in Quality of Life through Digitalization in the Construction Industry. Sustainability (Switzerland), 15 (1). ISSN 20711050

Irfan, M. and Alaloul, W.S. and Ghufran, M. and Yaseen, G. and Thaheem, M.J. and Qureshi, A.H. and Bilal, M. (2022) Analyzing the impact of organizational culture on social sustainability: a perspective of the construction industry. Environment, Development and Sustainability. ISSN 1387585X

Qureshi, A.H. and Alaloul, W.S. and Wing, W.K. and Saad, S. and Ammad, S. and Altaf, M. (2022) Characteristics-Based Framework of Effective Automated Monitoring Parameters in Construction Projects. Arabian Journal for Science and Engineering.

Qureshi, A.H. and Alaloul, W.S. and Wing, W.K. and Saad, S. and Ammad, S. and Altaf, M. (2022) Characteristics-Based Framework of Effective Automated Monitoring Parameters in Construction Projects. Arabian Journal for Science and Engineering. ISSN 2193567X

Alaloul, W.S. and Musarat, M.A. and Haruna, S. and Tayeh, B.A. and Norizan, M.N.B. (2022) Chemical attack on concrete containing a high volume of crumb rubber as a partial replacement for fine aggregate in engineered cementitious composite (ECC). Canadian Journal of Civil Engineering, 49 (1). pp. 11-17.

Tayeh, B.A. and Alaloul, W.S. and Alkurdi, M.H. and Abu Aisheh, Y.I. and Musarat, M.A. (2022) Evaluation of Biases in Construction Project Dispute Resolution: Case Study. Journal of Legal Affairs and Dispute Resolution in Engineering and Construction, 14 (1).

Qureshi, A.H. and Alaloul, W.S. and Wing, W.K. and Saad, S. and Alzubi, K.M. and Musarat, M.A. (2022) Factors affecting the implementation of automated progress monitoring of rebar using vision-based technologies. Construction Innovation. ISSN 14714175

Hannan Qureshi, A. and Alaloul, W.S. and Wing, W.K. and Saad, S. and Ammad, S. and Musarat, M.A. (2022) Factors impacting the implementation process of automated construction progress monitoring. Ain Shams Engineering Journal, 13 (6).

Hannan Qureshi, A. and Alaloul, W.S. and Wing, W.K. and Saad, S. and Ammad, S. and Musarat, M.A. (2022) Factors impacting the implementation process of automated construction progress monitoring. Ain Shams Engineering Journal, 13 (6).

Hannan Qureshi, A. and Alaloul, W.S. and Wing, W.K. and Saad, S. and Ammad, S. and Musarat, M.A. (2022) Factors impacting the implementation process of automated construction progress monitoring. Ain Shams Engineering Journal, 13 (6).

Saad, S. and Alaloul, W.S. and Ammad, S. and Altaf, M. and Qureshi, A.H. (2022) Identification of critical success factors for the adoption of Industrialized Building System (IBS) in Malaysian construction industry. Ain Shams Engineering Journal, 13 (2).

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Zoorob, S.E. and Usman, A. (2022) Influence of nanosilica particles on the high-temperature performance of waste denim fibre-modified bitumen. International Journal of Pavement Engineering, 23 (2). pp. 207-220.

Maqsoom, A. and Mubbasit, H. and Alqurashi, M. and Shaheen, I. and Alaloul, W.S. and Musarat, M.A. and Salman, A. and Aslam, B. and Zerouali, B. and Hussein, E.E. (2022) Intrinsic workforce diversity and construction worker productivity in Pakistan: Impact of employee age and industry experience. Sustainability (Switzerland), 14 (1).

Alaloul, W.S. and Alzubi, K.M. and Malkawi, A.B. and Al Salaheen, M. and Musarat, M.A. (2022) Productivity monitoring in building construction projects: a systematic review. Engineering, Construction and Architectural Management, 29 (7). pp. 2760-2785.

Alaloul, W.S. and Alzubi, K.M. and Malkawi, A.B. and Al Salaheen, M. and Musarat, M.A. (2022) Productivity monitoring in building construction projects: a systematic review. Engineering, Construction and Architectural Management, 29 (7). pp. 2760-2785.

Alaloul, W.S. and Alzubi, K.M. and Malkawi, A.B. and Al Salaheen, M. and Musarat, M.A. (2022) Productivity monitoring in building construction projects: a systematic review. Engineering, Construction and Architectural Management, 29 (7). pp. 2760-2785.

Rabbani, M.B.A. and Musarat, M.A. and Alaloul, W.S. and Ayub, S. and Bukhari, H. and Altaf, M. (2022) Road Accident Data Collection Systems in Developing and Developed Countries: A Review. International Journal of Integrated Engineering, 14 (1). pp. 336-352.

Abu Aisheh, Y.I. and Alaloul, W.S. and Alhammadi, S.A. and Tayeh, B.A. (2022) Safety management implementation drivers for construction projects: a structural equation modelling approach. International Journal of Occupational Safety and Ergonomics. ISSN 10803548

Shaheen, N. and Khushnood, R.A. and Musarat, M.A. and Alaloul, W.S. (2022) Self-Healing Nano-Concrete for Futuristic Infrastructures: A Review. Arabian Journal for Science and Engineering.

Shaheen, N. and Khushnood, R.A. and Musarat, M.A. and Alaloul, W.S. (2022) Self-Healing Nano-Concrete for Futuristic Infrastructures: A Review. Arabian Journal for Science and Engineering, 47 (4). pp. 5365-5375.

Murali, M. and Alaloul, W.S. and Mohammed, B.S. and Musarat, M.A. and Salaheen, M.A. and Al-Sabaeei, A.M. and Isyaka, A. (2022) Utilizing graphene oxide in cementitious composites: A systematic review. Case Studies in Construction Materials, 17.

Baarimah, A.O. and Alaloul, W.S. and Liew, M.S. and Kartika, W. and Al-Sharafi, M.A. and Musarat, M.A. and Alawag, A.M. and Qureshi, A.H. (2022) A bibliometric analysis and review of building information modelling for post-disaster reconstruction. Sustainability (Switzerland), 14 (1).

Baarimah, A.O. and Alaloul, W.S. and Liew, M.S. and Kartika, W. and Al-Sharafi, M.A. and Musarat, M.A. and Alawag, A.M. and Qureshi, A.H. (2022) A bibliometric analysis and review of building information modelling for post-disaster reconstruction. Sustainability (Switzerland), 14 (1).

Saad, S. and Alaloul, W.S. and Ammad, S. and Qureshi, A.H. (2022) A qualitative conceptual framework to tackle skill shortages in offsite construction industry: a scientometric approach. Engineering, Construction and Architectural Management, 29 (10). pp. 3917-3947.

Saad, S. and Alaloul, W.S. and Ammad, S. and Qureshi, A.H. (2022) A qualitative conceptual framework to tackle skill shortages in offsite construction industry: a scientometric approach. Engineering, Construction and Architectural Management, 29 (10). pp. 3917-3947.

Kamal, N.L.M. and Shafiq, N. and Alaloul, W.S. and Beddu, S. and Abd Manan, T.S.B. (2021) Application of response surface methodology for the optimization of mix design concrete using coal bottom ash as cement replacement material. Lecture Notes in Civil Engineering, 132. pp. 396-404.

Bukhari, H. and Thaheem, M.J. and Musarat, M.A. and Alaloul, W.S. and Altaf, M. (2021) Are Pakistani construction professionals truly happy? A benchmarking approach. Ain Shams Engineering Journal.

Isleem, H.F. and Tayeh, B.A. and Alaloul, W.S. and Musarat, M.A. and Raza, A. (2021) Artificial neural network (Ann) and finite element (fem) models for gfrp-reinforced concrete columns under axial compression. Materials, 14 (23).

Abu Aisheh, Y.I. and Tayeh, B.A. and Alaloul, W.S. and Jouda, A.F. (2021) Barriers of occupational safety implementation in infrastructure projects: Gaza strip case. International Journal of Environmental Research and Public Health, 18 (7).

Farooq, W. and Musarat, M.A. and Alaloul, W.S. and Kazmi, S.A.A. and Altaf, M. and Rabbani, M.B.A. (2021) Comparative Study of Thin-Film Perovskite Solar Cells Based on Methylammonium Lead Iodide and Methylammonium Lead Bromide. International Review of Electrical Engineering, 16 (6). pp. 587-595.

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2021) Construction machinery hire rates deviation in Malaysia: an inflation rate effect analysis. Revista de la Construccion, 20 (1). pp. 91-105.

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2021) Construction machinery hire rates deviation in Malaysia: an inflation rate effect analysis. Revista de la Construccion, 20 (1). pp. 91-105.

Alaloul, W.S. and Musarat, M.A. and Rabbani, M.B.A. and Iqbal, Q. and Maqsoom, A. and Farooq, W. (2021) Construction sector contribution to economic stability: Malaysian gdp distribution. Sustainability (Switzerland), 13 (9).

Abdullah, M.S. and Alaloul, W.S. and Liew, M.S. and Musarat, M.A. (2021) Delay and cost overrun of palm oil refinery construction projects: Artificial neural network (ann) model. Lecture Notes in Civil Engineering, 132. pp. 580-589.

Abdullah, M.S. and Alaloul, W.S. and Liew, M.S. and Musarat, M.A. (2021) Delay and cost overrun of palm oil refinery construction projects: Artificial neural network (ann) model. Lecture Notes in Civil Engineering, 132. pp. 580-589.

Tjaronge, M.W. and Musarat, M.A. and Law, K. and Alaloul, W.S. and Ayub, S. (2021) Effect of graphene oxide on mechanical properties of rubberized concrete: A review. Lecture Notes in Civil Engineering, 132. pp. 484-492.

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Yusoff, N.I.M. and Khairuddin, F.H. and Memon, A.M. (2021) Evaluation of the high-temperature rheological performance of tire pyrolysis oil-modified bio-asphalt. International Journal of Pavement Engineering.

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Yusoff, N.I.M. and Khairuddin, F.H. and Memon, A.M. (2021) Evaluation of the high-temperature rheological performance of tire pyrolysis oil-modified bio-asphalt. International Journal of Pavement Engineering.

Alaloul, W.S. and Qureshi, A.H. and Musarat, M.A. and Saad, S. (2021) Evolution of close-range detection and data acquisition technologies towards automation in construction progress monitoring. Journal of Building Engineering, 43.

Abu Aisheh, Y.I. and Tayeh, B.A. and Alaloul, W.S. and Almalki, A. (2021) Health and safety improvement in construction projects: a lean construction approach. International Journal of Occupational Safety and Ergonomics.

Abu Aisheh, Y.I. and Tayeh, B.A. and Alaloul, W.S. and Almalki, A. (2021) Health and safety improvement in construction projects: a lean construction approach. International Journal of Occupational Safety and Ergonomics.

Abu Aisheh, Y.I. and Tayeh, B.A. and Alaloul, W.S. and Almalki, A. (2021) Health and safety improvement in construction projects: a lean construction approach. International Journal of Occupational Safety and Ergonomics.

Bukhari, H. and Ali Musarat, M. and Alaloul, W.S. and Altaf, M. (2021) Human resource management (Hrm) practices in construction organizations: A review. International Review of Civil Engineering, 12 (4). pp. 255-263.

Saad, S. and Alaloul, W.S. and Ammad, S. and Altaf, M. and Qureshi, A.H. (2021) Identification of critical success factors for the adoption of Industrialized Building System (IBS) in Malaysian construction industry. Ain Shams Engineering Journal.

Alaloul, W.S. and Musarat, M.A. and Hui, C.J. (2021) Impact of elevated temperature on rubberized concrete: A review. Lecture Notes in Civil Engineering, 132. pp. 421-427.

Alaloul, W.S. and Musarat, M.A. and Hui, C.J. (2021) Impact of elevated temperature on rubberized concrete: A review. Lecture Notes in Civil Engineering, 132. pp. 421-427.

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2021) Impact of inflation rate on construction projects budget: A review. Ain Shams Engineering Journal, 12 (1). pp. 407-414.

Alawag, A.M.M. and Alaloul, W.S. and Liew, M.S. and Al-Bared, M.A.M. and Zawawi, N.A.W.A. and Ammad, S. (2021) The Implementation of the Industrialized Building System in the Malaysian Construction Industry�a Comprehensive Review. Lecture Notes in Mechanical Engineering. pp. 3-16.

Alawag, A.M.M. and Alaloul, W.S. and Liew, M.S. and Al-Bared, M.A.M. and Zawawi, N.A.W.A. and Ammad, S. (2021) The Implementation of the Industrialized Building System in the Malaysian Construction Industry�a Comprehensive Review. Lecture Notes in Mechanical Engineering. pp. 3-16.

Alawag, A.M.M. and Alaloul, W.S. and Liew, M.S. and Al-Bared, M.A.M. and Zawawi, N.A.W.A. and Ammad, S. (2021) The Implementation of the Industrialized Building System in the Malaysian Construction Industry�a Comprehensive Review. Lecture Notes in Mechanical Engineering. pp. 3-16.

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2021) Inflation rate and labours� wages in construction projects: economic relation investigation. Engineering, Construction and Architectural Management.

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2021) Inflation rate and labours� wages in construction projects: economic relation investigation. Engineering, Construction and Architectural Management.

Alaloul, W.S. and Musarat, M.A. and Liew, M.S. and Qureshi, A.H. and Maqsoom, A. (2021) Investigating the impact of inflation on labour wages in Construction Industry of Malaysia. Ain Shams Engineering Journal, 12 (2). pp. 1575-1582.

Imtiaz, L. and Kashif-Ur-rehman, S. and Alaloul, W.S. and Nazir, K. and Javed, M.F. and Aslam, F. and Musarat, M.A. (2021) Life cycle impact assessment of recycled aggregate concrete, geopolymer concrete, and recycled aggregate-based geopolymer concrete. Sustainability (Switzerland), 13 (24).

Bukhari, H. and Alaloul, W.S. and Musarat, M.A. and Akram, S. and Tabassum, I. and Altaf, M. (2021) Materializing low-cost energy-efficient residential utility through effective space design and masonry technique-a practical approach. Civil Engineering and Architecture, 9 (2). pp. 357-374.

Alaloul, W.S. and Musarat, M.A. and Haruna, S. and Law, K. and Tayeh, B.A. and Rafiq, W. and Ayub, S. (2021) Mechanical properties of silica fume modified high-volume fly ash rubberized self-compacting concrete. Sustainability (Switzerland), 13 (10).

Rafiq, W. and Napiah, M. and Habib, N.Z. and Sutanto, M.H. and Alaloul, W.S. and Khan, M.I. and Musarat, M.A. and Memon, A.M. (2021) Modeling and design optimization of reclaimed asphalt pavement containing crude palm oil using response surface methodology. Construction and Building Materials, 291.

Alaloul, W.S. and Musarat, M.A. and Shawn, L.E. and Al-Yacouby, A.M. and Toloue, I. and Rafiq, W. and Farooq, W. (2021) Multi-nozzle abrasive water jet for oil and gas platforms decommissioning: A review. Civil Engineering and Architecture, 9 (6). pp. 2062-2076.

Alhammadi, S.A. and Tayeh, B.A. and Alaloul, W.S. and Jouda, A.F. (2021) Occupational health and safety practice in infrastructure projects. International Journal of Occupational Safety and Ergonomics.

Alhammadi, S.A. and Tayeh, B.A. and Alaloul, W.S. and Jouda, A.F. (2021) Occupational health and safety practice in infrastructure projects. International Journal of Occupational Safety and Ergonomics.

Farooq, W. and Musarat, M.A. and Iqbal, J. and Kazmi, S.A.A. and Khan, A.D. and Alaloul, W.S. and Baarimah, A.O. and Elnaggar, A.Y. and Ghoneim, S.S.M. and Ghaly, R.N.R. (2021) Optimized thin-film organic solar cell with enhanced efficiency. Sustainability (Switzerland), 13 (23).

Ammad, S. and Alaloul, W.S. and Saad, S. and Qureshi, A.H. (2021) Personal Protective Equipment (PPE) usage in Construction Projects: A Systematic Review and Smart PLS Approach. Ain Shams Engineering Journal.

Ammad, S. and Alaloul, W.S. and Saad, S. and Qureshi, A.H. (2021) Personal protective equipment (PPE) usage in construction projects: A scientometric approach. Journal of Building Engineering, 35.

Alaloul, W.S. and Alzubi, K.M. and Malkawi, A.B. and Al Salaheen, M. and Musarat, M.A. (2021) Productivity monitoring in building construction projects: a systematic review. Engineering, Construction and Architectural Management.

Alaloul, W.S. and Alzubi, K.M. and Malkawi, A.B. and Al Salaheen, M. and Musarat, M.A. (2021) Productivity monitoring in building construction projects: a systematic review. Engineering, Construction and Architectural Management.

Alaloul, W.S. and Alzubi, K.M. and Malkawi, A.B. and Al Salaheen, M. and Musarat, M.A. (2021) Productivity monitoring in building construction projects: a systematic review. Engineering, Construction and Architectural Management.

Khalid, H. and Thaheem, M.J. and Malik, M.S.A. and Musarat, M.A. and Alaloul, W.S. (2021) Reducing cooling load and lifecycle cost for residential buildings: a case of Lahore, Pakistan. International Journal of Life Cycle Assessment, 26 (12). pp. 2355-2374.

Alhammadi, S.A. and Tayeh, B.A. and Alaloul, W.S. and Salem, T.J. (2021) Risk Management Strategies in Construction Organizations. Open Civil Engineering Journal, 15 (1). pp. 406-413.

Alhammadi, S.A. and Tayeh, B.A. and Alaloul, W.S. and Salem, T.J. (2021) Risk Management Strategies in Construction Organizations. Open Civil Engineering Journal, 15 (1). pp. 406-413.

Jaya, I. and Alaloul, W.S. and Musarat, M.A. (2021) Role of inflation in construction: A systematic review. Lecture Notes in Civil Engineering, 132. pp. 701-708.

Alaloul, W.S. and Altaf, M. and Musarat, M.A. and Javed, M.F. and Mosavi, A. (2021) Systematic review of life cycle assessment and life cycle cost analysis for pavement and a case study. Sustainability (Switzerland), 13 (8).

Bangash, K.A. and Kazmi, S.A.A. and Farooq, W. and Ayub, S. and Musarat, M.A. and Alaloul, W.S. and Javed, M.F. and Mosavi, A. (2021) Thickness optimization of thin-film tandem organic solar cell. Micromachines, 12 (5).

Bangash, K.A. and Kazmi, S.A.A. and Farooq, W. and Ayub, S. and Musarat, M.A. and Alaloul, W.S. and Javed, M.F. and Mosavi, A. (2021) Thickness optimization of thin-film tandem organic solar cell. Micromachines, 12 (5).

Saad, S. and Alaloul, W.S. and Ammad, S. and Qureshi, A.H. (2021) A qualitative conceptual framework to tackle skill shortages in offsite construction industry: a scientometric approach. Engineering, Construction and Architectural Management.

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.W.A. and Kennedy, I.B. (2020) Industrial Revolution 4.0 in the construction industry: Challenges and opportunities for stakeholders. Ain Shams Engineering Journal, 11 (1). pp. 225-230.

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.W.A. and Kennedy, I.B. (2020) Industrial Revolution 4.0 in the construction industry: Challenges and opportunities for stakeholders. Ain Shams Engineering Journal, 11 (1). pp. 225-230.

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Zoorob, S.E. and Usman, A. (2020) Influence of nanosilica particles on the high-temperature performance of waste denim fibre-modified bitumen. International Journal of Pavement Engineering.

Alaloul, W.S. and Musarat, M.A. and Liew, M.S. and Zawawi, N.A.W.A. (2020) Influential Safety Performance and Assessment in Construction Projects: A Review. Lecture Notes in Civil Engineering, 53. pp. 719-728.

Alaloul, W.S. and Musarat, M.A. and Liew, M.S. and Zawawi, N.A.W.A. (2020) Influential Safety Performance and Assessment in Construction Projects: A Review. Lecture Notes in Civil Engineering, 53. pp. 719-728.

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. and Maqsoom, A. and Qureshi, A.H. (2020) Investigating the impact of inflation on building materials prices in construction industry. Journal of Building Engineering, 32.

Rafiq, W. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Zabri, Z.N.B. and Khan, M.I. and Musarat, M.A. (2020) Investigation on hamburg wheel-tracking device stripping performance properties of recycled hot-mix asphalt mixtures. Materials, 13 (21). pp. 1-15.

Alaloul, W.S. and John, V.O. and Musarat, M.A. (2020) Mechanical and Thermal Properties of Interlocking Bricks Utilizing Wasted Polyethylene Terephthalate. International Journal of Concrete Structures and Materials, 14 (1).

Tayeh, B.A. and Salem, T.J. and Aisheh, Y.I.A. and Alaloul, W.S. (2020) Risk factors affecting the performance of construction projects in gaza strip. Open Civil Engineering Journal, 14 (1). pp. 94-104.

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.W. and Mohammed, B.S. and Adamu, M. and Musharat, M.A. (2020) Structural equation modelling of construction project performance based on coordination factors. Cogent Engineering, 7 (1).

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Usman, A. (2020) A systematic review of bio-asphalt for flexible pavement applications: Coherent taxonomy, motivations, challenges and future directions. Journal of Cleaner Production, 249.

Tayeh, B.A. and Alaloul, W.S. and Muhaisen, W.B. (2019) Challenges facing small-sized construction firms in the gaza strip. Open Civil Engineering Journal, 13 (1). pp. 51-57.

Mohammed, B.S. and Achara, B.E. and Liew, M.S. and Alaloul, W.S. and Khed, V.C. (2019) Effects of elevated temperature on the tensile properties of NS-modified self-consolidating engineered cementitious composites and property optimization using response surface methodology (RSM). Construction and Building Materials, 206. pp. 449-469.

Mohammed, B.S. and Achara, B.E. and Liew, M.S. and Alaloul, W.S. and Khed, V.C. (2019) Effects of elevated temperature on the tensile properties of NS-modified self-consolidating engineered cementitious composites and property optimization using response surface methodology (RSM). Construction and Building Materials, 206. pp. 449-469.

Adamu, M. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. (2019) Evaluating the impact resistance of roller compacted concrete containing crumb rubber and nanosilica using response surface methodology and Weibull distribution. World Journal of Engineering, 16 (1). pp. 33-43.

Tayeh, B.A. and Hamad, R.J.A. and Alaloul, W.S. and Almanassra, M. (2019) Factors affecting defects occurrence in structural design stage of residential buildings in gaza strip. Open Civil Engineering Journal, 13 (1). pp. 129-139.

Alaloul, W.S. and Liew, M.S. and Wan Zawawi, N.A. (2018) Communication, coordination and cooperation in construction projects: Business environment and human behaviours. IOP Conference Series: Materials Science and Engineering, 291 (1).

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. (2018) Physical properties of the rubberized interlocking masonry brick. International Journal of Civil Engineering and Technology, 9 (6). pp. 656-664.

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. (2018) Physical properties of the rubberized interlocking masonry brick. International Journal of Civil Engineering and Technology, 9 (6). pp. 656-664.

Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. and Khed, V.C. and Hoong, C.Y. and Adamu, M. (2018) Properties of nano-silica modified pervious concrete. Case Studies in Construction Materials, 8. pp. 409-422.

Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. and Khed, V.C. and Hoong, C.Y. and Adamu, M. (2018) Properties of nano-silica modified pervious concrete. Case Studies in Construction Materials, 8. pp. 409-422.

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.W.A. (2016) Identification of coordination factors affecting building projects performance. Alexandria Engineering Journal, 55 (3). pp. 2689-2698.

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.W.A. (2016) Identification of coordination factors affecting building projects performance. Alexandria Engineering Journal, 55 (3). pp. 2689-2698.

Conference or Workshop Item

Al-Awag, A.M. and Alaloul, W.S. and Liew, M.S. and Baarimah, A.O. and Musarat, M.A. (2023) The potential role of industrialized building systems (IBS) in Malaysian sustainable construction: Awareness and barriers. In: UNSPECIFIED.

Qureshi, A.H. and Alaloul, W.S. and Murtiyoso, A. and Saad, S. and Manzoor, B. (2022) COMPARISON OF PHOTOGRAMMETRY TOOLS CONSIDERING REBAR PROGRESS RECOGNITION. In: UNSPECIFIED.

Alzubi, K.M. and Alaloul, W.S. and Salaheen, M.A. and Qureshi, A.H. and Musarat, M.A. and Baarimah, A.O. (2021) Automated Monitoring for Construction Productivity Recognition. In: UNSPECIFIED.

Musarat, M.A. and Altaf, M. and Rabbani, M.B.A. and Alaloul, W.S. and Alzubi, K.M. and Al Salaheen, M. (2021) Automation in Traffic Engineering to Prevent Road Accidents: A Review. In: UNSPECIFIED.

Ammad, S. and Alaloul, W.S. and Saad, S. and Altaf, M. and Alawag, A.M. and Ali, M. (2021) Building Information Modelling (BIM) and Occupational Safety in Infrastructure Projects. In: UNSPECIFIED.

Musarat, M.A. and Alaloul, W.S. and Ayub, S. and Rabbani, M.B.A. and Farooq, W. and Altaf, M. (2021) Chemical and Physical Behavior of Rubberized Concrete: A Review. In: UNSPECIFIED.

Baarimah, A.O. and Alaloul, W.S. and Liew, M.S. and Alawag, A.M. and Musarat, M.A. and Alzubi, K.M. (2021) Current State of Post-Disaster Reconstruction Projects: A Bibliometric Analysis. In: UNSPECIFIED.

Musarat, M.A. and Hameed, N. and Altaf, M. and Alaloul, W.S. and Salaheen, M.A. and Alawag, A.M. (2021) Digital Transformation of the Construction Industry: A Review. In: UNSPECIFIED.

Maqsoom, A. and Arif, U. and Aslam, I. and Musarat, M.A. and Alaloul, W.S. and Baarimah, A.O. (2021) Green Human Resource Practices on Pro-environmental behaviour of workers: Case of Pakistani construction industry. In: UNSPECIFIED.

Bukhari, H. and Musarat, M.A. and Alaloul, W.S. and Riaz, M. (2021) Hempcrete as a Sustainable Building Material: A Review. In: UNSPECIFIED.

Musarat, M.A. and Altaf, M. and Hameed, N. and Alaloul, W.S. and Baarimah, A.O. and Alzubi, K.M. (2021) Impact of Communication on Site Accidents Prevention: A Review. In: UNSPECIFIED.

Mohsen, A. and Alaloul, W.S. and Liew, M.S. and Musarat, M.A. and Baarimah, A.O. and Alzubi, K.M. and Altaf, M. (2021) Impact of the COVID-19 Pandemic on Construction Industry in Malaysia. In: UNSPECIFIED.

Qureshi, A.H. and Alaloul, W.S. and Manzoor, B. and Saad, S. and Alawag, A.M. and Alzubi, K.M. (2021) Implementation Challenges of Automated Construction Progress Monitoring under Industry 4.0 Framework Towards Sustainable Construction. In: UNSPECIFIED.

Rabbani, M.B.A. and Usama, U. and Musarat, M.A. and Alaloul, W.S. (2021) Indicators of injury severity of truck crashes using random parameter logit modeling. In: UNSPECIFIED.

Baarimah, A.O. and Alaloul, W.S. and Liew, M.S. and Al-Aidrous, A.-H.M.H. and Alawag, A.M. and Musarat, M.A. (2021) Integration of Building Information Modeling (BIM) and Value Engineering in Construction Projects: A Bibliometric Analysis. In: UNSPECIFIED.

Musarat, M.A. and Hameed, N. and Alaloul, W.S. and Altaf, M. and Rafiq, W. and Rabbani, M.B.A. and Alzubi, K.M. (2021) Role of automation in site accidents avidness in the construction industry: A Review. In: UNSPECIFIED.

Altaf, M. and Alaloul, W.S. and Khan, S. and Liew, M.S. and Musarat, M.A. and Mohsen, A.A. (2021) Value Analysis in Construction Projects with BIM implementation: A Systematic Review. In: UNSPECIFIED.

Saad, S. and Alaloul, W.S. and Shafiq, N. and Ammad, S. and Qureshi, A.H. and Mohammed, A.A.M. (2021) Visually Programming Automated Slab Positioning Tool (ASPT) using Evolutionary Solvers. In: UNSPECIFIED.

Altaf, M. and Alaloul, W.S. and Musarat, M.A. and Bukhari, H. and Saad, S. and Ammad, S. (2020) BIM Implication of Life Cycle Cost Analysis in Construction Project: A Systematic Review. In: UNSPECIFIED.

Altaf, M. and Alaloul, W.S. and Musarat, M.A. and Bukhari, H. and Saad, S. and Ammad, S. (2020) BIM Implication of Life Cycle Cost Analysis in Construction Project: A Systematic Review. In: UNSPECIFIED.

Saad, S. and Alaloul, W.S. and Ammad, S. and Qureshi, A.H. and Altaf, M. and Rasheed, K. (2020) Design Phase Carbon Emission Prediction Using A Visual Programming Technique. In: UNSPECIFIED.

Saad, S. and Alaloul, W.S. and Ammad, S. and Qureshi, A.H. and Altaf, M. and Rasheed, K. (2020) Design Phase Carbon Emission Prediction Using A Visual Programming Technique. In: UNSPECIFIED.

Ammad, S. and Alaloul, W.S. and Saad, S. and Qureshi, A.H. and Altaf, M. and Mohsen Mohammed, A.A. (2020) Evaluating Safety Attributes in Infrastructure Projects. In: UNSPECIFIED.

Ammad, S. and Alaloul, W.S. and Saad, S. and Qureshi, A.H. and Altaf, M. and Mohsen Mohammed, A.A. (2020) Evaluating Safety Attributes in Infrastructure Projects. In: UNSPECIFIED.

Alaloul, W.S. and Bin Ismail, A.S.I. and Ammad, S. and Saad, S. (2020) Health and Safety for Infrastructure Projects: PPE Adaptation and Barriers. In: UNSPECIFIED.

Qureshi, A.H. and Alaloul, W.S. and Manzoor, B. and Musarat, M.A. and Saad, S. and Ammad, S. (2020) Implications of Machine Learning Integrated Technologies for Construction Progress Detection under Industry 4.0 (IR 4.0). In: UNSPECIFIED.

Qureshi, A.H. and Alaloul, W.S. and Manzoor, B. and Musarat, M.A. and Saad, S. and Ammad, S. (2020) Implications of Machine Learning Integrated Technologies for Construction Progress Detection under Industry 4.0 (IR 4.0). In: UNSPECIFIED.

Bukhari, H. and Musarat, M.A. and Alaloul, W.S. (2020) Rat Trap Bond: A state of review. In: UNSPECIFIED.

Bukhari, H. and Musarat, M.A. and Alaloul, W.S. (2020) Rat Trap Bond: A state of review. In: UNSPECIFIED.

Tayeh, B.A. and Alaloul, W.S. and Alnairab, A.F. (2019) Challenges facing municipalities to provide wastewater services: A case study of Gaza strip. In: UNSPECIFIED.

Tayeh, B.A. and Alaloul, W.S. and Alnairab, A.F. (2019) Challenges facing municipalities to provide wastewater services: A case study of Gaza strip. In: UNSPECIFIED.

Tayeh, B.A. and Alaloul, W.S. and Al-Ghazalli, N.K. (2019) Tender pricing of infrastructure projects: Affecting factors. In: UNSPECIFIED.

Tayeh, B.A. and Alaloul, W.S. and Al-Ghazalli, N.K. (2019) Tender pricing of infrastructure projects: Affecting factors. In: UNSPECIFIED.

Alaloul, W.S. and Liew, M.S. and Wan Abdullah Zawawi, N.A. (2015) The characteristics of coordination process in construction projects. In: UNSPECIFIED.

Alaloul, W.S. and Liew, M.S. and Wan Abdullah Zawawi, N.A. (2015) The characteristics of coordination process in construction projects. In: UNSPECIFIED.

This list was generated on Fri Mar 29 03:28:40 2024 +08.