Items where Author is "Ahmad, F."

Group by: Item Type | No Grouping

Jump to: Article | Conference or Workshop Item | Book | Citation Index Journal

Number of items: 155.

Article

Malik, K. and Ahmad, F. and Yunus, N.A. and Gunister, E. and Shahed, C.A. (2024) Mechanical Investigation of Kenaf/Carbon Hybrid Composites for Building and Construction Applications. Journal of Composites for Construction, 28 (1).

Shahed, C.A. and Ahmad, F. and GÃ¼nister, E. and Foudzi, F.M. and Ali, S. and Malik, K. and Harun, W.S.W. (2023) Antibacterial mechanism with consequent cytotoxicity of different reinforcements in biodegradable magnesium and zinc alloys: A review. Journal of Magnesium and Alloys.

Nisa, Z.U. and Chuan, L.K. and Guan, B.H. and Ahmad, F. and Ayub, S. (2023) Coconut shell char-based nanocomposites of polyamide-6: An investigation of thermal, morphological, and crystalline properties. Diamond and Related Materials, 138. ISSN 09259635

Nisa, Z.U. and Chuan, L.K. and Guan, B.H. and Ahmad, F. and Ayub, S. (2023) Comparative Analysis of Thermal Behavior of Coagulation-processed Nanocomposites: Polypropylene and Polyamide-6. NanoWorld Journal, 9 (3). pp. 71-76.

Baena, J.C. and Wang, C. and Kabir, I.I. and Khalid, A. and Nazir, M.T. and Yuen, A.C.Y. and Ahmad, F. and Yeoh, G.H. (2023) Fire behaviour of waterborne intumescent coatings on timber substrate for bushfire exposure. Fire Safety Journal, 140. ISSN 03797112

Mogan, J. and Harun, W.S.W. and Kadirgama, K. and Ramasamy, D. and Foudzi, F.M. and Sulong, A.B. and Tarlochan, F. and Ahmad, F. (2023) Fused Deposition Modelling of Polymer Composite: A Progress. Polymers, 15 (1).

Ali, S. and Ahmad, F. and Yusoff, P.S.M.M. and Muhamad, N. and Haider, W. and Malik, K. and Shahed, C.A. (2023) Interface and mechanical properties of graphene/copper composite with sonication induced Au decoration of graphene. Powder Technology, 430. ISSN 00325910

Azmi, Y. and Ahmad, F. and Kabir, S. and Lee, Y.X. and Zulfiqar, A. and Yeoh, G.H. and Qaiser, A. and Masset, P.J. (2023) Investigating the Mechanical Performance of Intumescent Coating Enhanced with Magnesium Oxide (MgO) for Structural Steel Application. Lecture Notes in Mechanical Engineering. pp. 927-938.

Ayub, S. and Hoe Guan, B. and Soleimani, H. and Ahmad, F. and Un Nisa, Z. and Yetunde Yusuf, J. and Amin Bin Hamid, M. and Mudassir Hassan, Y. (2023) Magnetite deposit on graphene nanoplatelets Surface: An assessment of grafting parameters: Magnetite deposit on graphene nanoplatelets Surface. Ain Shams Engineering Journal, 14 (7).

Ayub, S. and Guan, B.H. and Ahmad, F. and Soleimani, H. and You, K.Y. and Nisa, Z.U. and Yusuf, J.Y. and Bin Hamid, M.A. (2023) Optimization of magnetite with modified graphene for microwave absorption properties. Journal of Alloys and Compounds, 936. ISSN 09258388

Malik, K. and Ahmad, F. and Yunus, N.A. and Gunister, E. and Ali, S. and Raza, A. (2023) Physical and mechanical properties of kenaf/flax hybrid composites. Journal of Applied Polymer Science, 140 (5).

Raza, A. and Ahmad, F. and Badri, T.M. and Raza, M.R. and Malik, K. and Ali, S. (2023) Selection of Materials Based on Thermo-Mechanical Properties of Thermal Barrier Coatings and Their Failuresâ��A Review. Lecture Notes in Mechanical Engineering. pp. 255-264.

Malik, K. and Ahmad, F. and Yunus, N.A. and Nakato, T. and Mouri, E. and Dawood, S. and Memon, I.R. (2023) A new method of reinforcing graphene nanoplatelets in glass/epoxy composites: Eine neue Methode zur VerstÃ¤rkung von Glas-/Epoxid-Verbundwerkstoffen mit Graphen-NanoplÃ¤ttchen. Materialwissenschaft und Werkstofftechnik, 54 (9). pp. 1157-1166. ISSN 09335137

Nisa, Z.U. and Chuan, L.K. and Guan, B.H. and Ayub, S. and Ahmad, F. (2022) Anti-Wear and Anti-Erosive Properties of Polymers and Their Hybrid Composites: A Critical Review of Findings and Needs. Nanomaterials, 12 (13).

Rehman, S. and Ranjha, N.M. and Shoukat, H. and Madni, A. and Ahmad, F. and Raza, M.R. and Jameel, Q.A. and Majeed, A. and Ramzan, N. (2022) Correction to: Fabrication, Evaluation, In Vivo Pharmacokinetic and Toxicological Analysis of pH-Sensitive Eudragit S-100-Coated Hydrogel Beads: a Promising Strategy for Colon Targeting (AAPS PharmSciTech, (2021), 22, 6, (209), 10.1208/s12249-021-02082-y). AAPS PharmSciTech, 23 (4). ISSN 15309932

Ali, S. and Ahmad, F. and Shirazi, M.I. and Malik, K. and Raza, M.R. and Memon, I.R. (2022) Flow induced fiber orientation in short carbon fiber reinforced copper matrix composites. Materials Today Communications, 33.

Raza, A. and Ahmad, F. and Badri, T.M. and Raza, M.R. and Malik, K. (2022) An Influence of Oxygen Flow Rate and Spray Distance on the Porosity of HVOF Coating and Its Effects on Corrosionâ��A Review. Materials, 15 (18).

Ayub, S. and Hoe Guan, B. and Soleimani, H. and Ahmad, F. and Un Nisa, Z. and Yetunde Yusuf, J. and Amin Bin Hamid, M. and Mudassir Hassan, Y. (2022) Magnetite deposit on graphene nanoplatelets Surface: An assessment of grafting parameters: Magnetite deposit on graphene nanoplatelets Surface. Ain Shams Engineering Journal.

Rehman, S. and Madni, A. and Jameel, Q.A. and Usman, F. and Raza, M.R. and Ahmad, F. and Shoukat, H. and Aali, H. and Shafiq, A. (2022) Natural Polymer-Based Graphene Oxide Bio-nanocomposite Hydrogel Beads: Superstructures with Advanced Potentials for Drug Delivery. AAPS PharmSciTech, 23 (8). ISSN 15309932

Mihoob, M.M. and Mohammed, H.G. and Albarody, T.M.B. and Ahmad, F. and Alnarabiji, M.S. (2022) Optimal Process Parameters for a Thermal-Sprayed Molybdenum-Reinforced Zirconium Diboride Composite on a Dummy Substrate. Energies, 15 (24).

Malik, K. and Ahmad, F. and Yunus, N.A. and Gunister, E. and Ali, S. and Raza, A. (2022) Physical and mechanical properties of kenaf/flax hybrid composites. Journal of Applied Polymer Science.

Naseer, A. and Ahmad, F. and Ali, S. and Haider, W. (2022) Powder injection molded nano copper oxide grafted graphene reinforced copper matrix composites. Powder Technology, 397.

Kabeb, S.M. and Hassan, A. and Ahmad, F. and Mohamad, Z. and Sharer, Z. and Mokhtar, M. (2022) Synergistic effects of hybrid nanofillers on graphene oxide reinforced epoxy coating on corrosion resistance and fire retardancy. Journal of Applied Polymer Science, 139 (7).

Ahmad, F. and Amjad, W.A. and Mehmood, F. and Jan, M.T. and Dennis, J.O. and Khir, M.H.B.M. (2021) Design, modelling and testing of CMOS-MEMS switch. Microsystem Technologies, 27 (7). pp. 2543-2552.

Hussain, P.B. and Shaik, N.B. and Mokhtar, A.A.B. and Bakthavatchalam, B. and Ahmad, F. and Harun, M.S.B. (2021) Failure analysis of a broken SA564 stainless steel pump shaft. International Journal of Materials and Product Technology, 62 (1-3). pp. 152-166.

Ng, E.L.H. and Lau, K.K. and Lau, W.J. and Ahmad, F. (2021) Holistic review on the recent development in mathematical modelling and process simulation of hollow fiber membrane contactor for gas separation process. Journal of Industrial and Engineering Chemistry, 104. pp. 231-257.

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ahmad, F. and Sajid, Z. (2021) Mechanical Properties and Failure Mechanisms of Novel Resin-infused Thermoplastic and Conventional Thermoset 3D Fabric Composites. Applied Composite Materials.

Arogundade, A.I. and Megat-Yusoff, P.S.M. and Ahmad, F. and Bhat, A.H. and Afolabi, L.O. (2021) Modification of bauxite residue with oxalic acid for improved performance in intumescent coatings. Journal of Materials Research and Technology, 12. pp. 679-687.

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ahmad, F. and Sajid, Z. and Gerard, P. and Sharp, K. (2021) Performance comparison of resin-infused thermoplastic and thermoset 3D fabric composites under impact loading. International Journal of Mechanical Sciences, 189.

Malik, K. and Ahmad, F. and Gunister, E. and Nakato, T. and Mouri, E. and Muhammad, M.B. and Ali, S. (2021) A Review of Flax Fiber Reinforced Thermoset Polymer Composites: Structure and Mechanical Performance. Journal of Natural Fibers.

Malik, K. and Ahmad, F. and Yunus, N.A. and Gunister, E. and Nakato, T. and Mouri, E. and Ali, S. (2021) A Review of Flax Fiber Reinforced Thermoset Polymer Composites: Thermal-Physical Properties, Improvements and Application. Journal of Natural Fibers.

Ali, S. and Ahmad, F. and Yusoff, P.S.M.M. and Muhamad, N. and OÃ±ate, E. and Raza, M.R. and Malik, K. (2021) A review of graphene reinforced Cu matrix composites for thermal management of smart electronics. Composites Part A: Applied Science and Manufacturing, 144.

Ahmad, F. and Baig, A. and Dennis, J.O. and Hamid, N.H.B. and Md Khir, M.H.B. (2020) Characterization of MEMS comb capacitor. Microsystem Technologies, 26 (4). pp. 1387-1392.

Ahmad, F. and Mohammad, M. and Muhsan, A.S. and Ali, M. and Naseer, A. and Aslam, M. and Malik, M.R.R. (2020) Effect of Thermal Cycling on Thermal Conductivity of Powder Injection Moulded MWCNT Reinforced Copper Matrix Composites. Lecture Notes in Mechanical Engineering. pp. 377-387.

Kabir, S. and Ahmad, F. and Malik, K. and Nosbi, N. and Gui Llaumat, L. (2020) Effect of heat resistant coating on the drilled hole quality of hybrid fiber reinforced epoxy composite. Evergreen, 7 (4). pp. 530-537.

Ali, M. and Ahmad, F. and Malik, M.R.R. and Niazi, A.R. (2020) Fabrication of high magnetic performance Feâ��50Ni alloy by powder injection molding. Materials and Manufacturing Processes, 35 (14). pp. 1557-1566.

Ali, M. and Ahmad, F. (2020) Influence of powder loading on rheology and injection molding of Fe-50Ni feedstocks. Materials and Manufacturing Processes, 35 (5). pp. 579-589.

Mohamad, W.F. and Khan, A.A. and Barroy, P. and Durand-Drouhin, O. and Puille, C. and Lahmar, A. and Ahmad, F. (2020) Microstructure and surface characterization of Ni-Cr based composites containing variable solid lubricants. Tribology - Materials, Surfaces and Interfaces, 14 (4). pp. 219-228.

Mohamad, W.F. and Khan, A.A. and Ahmad, F. and Yassin, A. (2020) Phase a nal ysis and m icrostructure s tudy of s intered Ni-Crc omposites containing MoS2, Ag and CaF2additives as solid l ubricants. Journal of Mechanical Engineering and Sciences, 14 (2). pp. 6548-6556.

Kabeb, S.M. and Hassan, A. and Mohamad, Z. and Sharer, Z. and Mokhtar, M. and Ahmad, F. (2019) Exploring the effects of nanofillers of epoxy nanocomposite coating for sustainable corrosion protection. Chemical Engineering Transactions, 72. pp. 121-126.

Ali, M. and Ahmad, F. and Melor, P.S. and Yasir, M. and Yahya, N. and Aslam, M. and Malik, M.R.R. (2019) Influence of powder loading on densification and microstructure of injection molded Fe-50Ni soft magnetic alloys Einfluss der Pulverbeladung auf die Verdichtung und das GefÃ¼ge spritzgegossener weichmagnetischer Fe-50Ni-Legierungen. Materialwissenschaft und Werkstofftechnik, 50 (3). pp. 274-282.

Ahmad, F. and Draz, M.U. and Su, L. and Rauf, A. (2019) Taking the bad with the good: The nexus between tourism and environmental degradation in the lower middle-income Southeast Asian economies. Journal of Cleaner Production, 233. pp. 1240-1249.

Yasir, M. and Ahmad, F. and Melor, P.S. and Ullah, S. and Ali, M. (2019) The influence of fiber length and concentration on the thermal properties of basalt fiber reinforced intumescent coating. International Journal of Recent Technology and Engineering, 7 (6). pp. 898-901.

Ahmad, F. and Ullah, S. and Merican, N.H.B.H. and OÃ±ate, E. and Al-Sehemi, A.G. and Yeoh, G.H. (2019) An investigation on thermal performance of wollastonite and bentonite reinforced intumescent fire-retardant coating for steel structures. Construction and Building Materials, 228.

Ali, M. and Ahmad, F. (2019) A review of processing techniques for Fe-Ni soft magnetic materials. Materials and Manufacturing Processes, 34 (14). pp. 1580-1604.

Naseer, A. and Ahmad, F. and Aslam, M. and Guan, B.H. and Harun, W.S.W. and Muhamad, N. and Raza, M.R. and German, R.M. (2019) A review of processing techniques for graphene-reinforced metal matrix composites. Materials and Manufacturing Processes, 34 (9). pp. 957-985.

Puspitasari, W.C. and Ahmad, F. and Ullah, S. and Hussain, P. and Megat-Yusoff, P.S.M. and Masset, P.J. (2019) The study of adhesion between steel substrate, primer, and char of intumescent fire retardant coating. Progress in Organic Coatings, 127. pp. 181-193.

Ahmad, F. and Draz, M.U. and Yang, S.-C. (2018) Causality nexus of exports, FDI and economic growth of the ASEAN5 economies: evidence from panel data analysis. Journal of International Trade and Economic Development, 27 (6). pp. 685-700.

Yasir, M. and Amir, N. and Ahmad, F. and Ullah, S. and Jimenez, M. (2018) Effect of basalt fibers dispersion on steel fire protection performance of epoxy-based intumescent coatings. Progress in Organic Coatings, 122. pp. 229-238.

Gillani, Q.F. and Ahmad, F. and Mutalib, M.I.A. and Megat-Yusoff, P.S.M. and Ullah, S. (2018) Effects of Halloysite Nanotube Reinforcement in Expandable Graphite Based Intumescent Fire Retardant Coatings Developed Using Hybrid Epoxy Binder System. Chinese Journal of Polymer Science (English Edition). pp. 1-11.

Ahmad, F. and Zulkurnain, E.S.B. and Ullah, S. and Amir, N. (2018) Effects of nano-sized boron nitride on thermal decomposition and water resistance behaviour of epoxy-based intumescent coating. Journal of Analytical and Applied Pyrolysis, 132. pp. 171-183.

Altaf, K. and Qayyum, J.A. and Rani, A.M.A. and Ahmad, F. and Megat-Yusoff, P.S.M. and Baharom, M. and Aziz, A.R.A. and Jahanzaib, M. and German, R.M. (2018) Performance analysis of enhanced 3D printed polymer molds for metal injection molding process. Metals, 8 (6).

Gillani, Q.F. and Ahmad, F. and Abdul Mutalib, M.I. and Megat-Yusoff, P.S.M. and Ullah, S. and Messet, P.J. and Zia-ul-Mustafa, M. (2018) Thermal degradation and pyrolysis analysis of zinc borate reinforced intumescent fire retardant coatings. Progress in Organic Coatings, 123. pp. 82-98.

Ahmad, F. and Draz, M.U. and Yang, S.-C. (2018) What drives OFDI? Comparative evidence from ASEAN and selected Asian economies. Journal of Chinese Economic and Foreign Trade Studies, 11 (1). pp. 15-31.

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. and Jusoh, N. and Ahmad, F. (2018) An atomistic simulation towards elucidation of operating temperature effect in CO2 swelling of polysulfone polymeric membranes. Journal of Natural Gas Science and Engineering, 57. pp. 135-154.

Harun, W.S.W. and Kamariah, M.S.I.N. and Muhamad, N. and Ghani, S.A.C. and Ahmad, F. and Mohamed, Z. (2018) A review of powder additive manufacturing processes for metallic biomaterials. Powder Technology, 327. pp. 128-151.

Gillani, Q.F. and Ahmad, F. and Melor, P.S. and Mutlib, M.I.A. and Ullah, S. (2018) A synergy study of zinc borate in halloysite nanotube reinforced, siloxane epoxy base intumescent fire resistive coatings: Eine Synergieuntersuchung zu Zinkborat in, mit Halloysit-NanorÃ¶hren verstÃ¤rkten, Siloxane Epoxy basierten, intumeszenten feuerfesten Beschichtungen. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 420-426.

Yasir, M. and Amir, N.B. and Ahmad, F. and Rodzhan, N.S. (2017) Effect of basalt fibres reinforcement and aluminum trihydrate on the thermal properties of intumescent fire retardant coatings. IOP Conference Series: Materials Science and Engineering, 226 (1).

Kamariah, M.S.I.N. and Harun, W.S.W. and Khalil, N.Z. and Ahmad, F. and Ismail, M.H. and Sharif, S. (2017) Effect of heat treatment on mechanical properties and microstructure of selective laser melting 316L stainless steel. IOP Conference Series: Materials Science and Engineering, 257 (1).

Ullah, S. and Ahmad, F. and Shariff, A.M. and Bustam, M.A. and Gonfa, G. and Gillani, Q.F. (2017) Effects of ammonium polyphosphate and boric acid on the thermal degradation of an intumescent fire retardant coating. Progress in Organic Coatings, 109. pp. 70-82.

Raza, M.R. and Ahmad, F. and Muhamad, N. and Sulong, A.B. and Omar, M.A. and Akhtar, M.N. and Aslam, M. and Sherazi, I. (2017) Effects of debinding and sintering atmosphere on properties and corrosion resistance of powder injection molded 316 L - Stainless steel. Sains Malaysiana, 46 (2). pp. 285-293.

Hazwani Dzulkafli, H. and Ahmad, F. and Ullah, S. and Hussain, P. and Mamat, O. and Megat-Yusoff, P.S.M. (2017) Effects of talc on fire retarding, thermal degradation and water resistance of intumescent coating. Applied Clay Science, 146. pp. 350-361.

Lock, S.S.M. and Lau, K.K. and Mash’al, A.-A.B. and Shariff, A.M. and Yeong, Y.F. and Mei, I.L.S. and Ahmad, F. (2017) Elucidation on the effect of operating temperature to the transport properties of polymeric membrane using molecular simulation tool. Communications in Computer and Information Science, 752. pp. 456-471.

Dasan, Y.K. and Bhat, A.H. and Ahmad, F. (2017) Polymer blend of PLA/PHBV based bionanocomposites reinforced with nanocrystalline cellulose for potential application as packaging material. Carbohydrate Polymers, 157. pp. 1323-1332.

Kaur, J. and Ahmad, F. and Ullah, S. and Yusoff, P.S.M.M. and Ahmad, R. (2017) The Role of Bentonite Clay on Improvement in Char Adhesion of Intumescent Fire-Retardant Coating with Steel Substrate. Arabian Journal for Science and Engineering, 42 (5). pp. 2043-2053.

Zia-ul-Mustafa, M. and Ahmad, F. and Ullah, S. and Amir, N. and Gillani, Q.F. (2017) Thermal and pyrolysis analysis of minerals reinforced intumescent fire retardant coating. Progress in Organic Coatings, 102. pp. 201-216.

Ullah, S. and Ahmad, F. and Shariff, A.M. and Raza, M.R. and Masset, P.J. (2017) The role of multi-wall carbon nanotubes in char strength of epoxy based intumescent fire retardant coating. Journal of Analytical and Applied Pyrolysis, 124. pp. 149-160.

Mahmud, A. and Megat-Yusoff, P.S.M. and Ahmad, F. and Farezzuan, A.A. (2016) Acid leaching as efficient chemical treatment for rice husk in production of amorphous silica nanoparticles. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13384-13388.

Amir, N. and Jalil, A.N.A. and Ahmad, F. (2016) Characterization and study of char performance of glass wool and rockwool hybrid fibre reinforced intumescent coatings. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12268-12274.

Altaf, K. and Abdul Rani, A.M. and Ahmad, F. and Baharom, M. and Raghavan, V.R. (2016) Determining the effects of thermal conductivity on epoxy molds using profiled cooling channels with metal inserts. Journal of Mechanical Science and Technology, 30 (11). pp. 4901-4907.

Arogundade, A.I. and Megat-Yusoff, P.S.M. and Ahmad, F. and Bhat, A.H. and Gillani, Q.F. (2016) Effect of bauxite residue loading on heat shielding performance of an ammonium polyphosphate based epoxy intumescent system. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12165-12169.

Aziz, H. and Ahmad, F. (2016) Effects from nano-titanium oxide on the thermal resistance of an intumescent fire retardant coating for structural applications. Progress in Organic Coatings, 101. pp. 431-439.

Muhsan, A.S. and Mohamed, N.M. and Ahmad, F. and Albarody, T.M.B. and Shahid, M.U. (2016) Effects of sintering parameters on the microstructural characteristics of cu/cnts nanocomposites. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14294-14298.

Jan, M.T. and Ahmad, F. and Hamid, N.H.B. and Khir, M.H.B.M. and Shoaib, M. and Ashraf, K. (2016) Experimental investigation of temperature and relative humidity effects on resonance frequency and quality factor of CMOS-MEMS paddle resonator. Microelectronics Reliability, 63. pp. 82-89.

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Altaf, K. and Omar, M.A. and Abdul Khalil, H.P.S. and Raza, M.R. (2016) Investigation of Rheological Behavior of Low Pressure Injection Molded Stainless Steel Feedstocks. Advances in Materials Science and Engineering, 2016.

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Altaf, K. and Omar, M.A. and Rafi Raza, M. (2016) Low pressure injection molding of boron admixed 316l stainless steel for engineering applications. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11960-11965.

Dennis, J.O. and Ahmad, F. and Khir, M.H.B.M. and Hamid, N.H.B. (2016) Post micromachining of MPW based CMOSâ��MEMS comb resonator and its mechanical and thermal characterization. Microsystem Technologies, 22 (12). pp. 2909-2919.

Mahmud, A. and Bt Megat Yusoff, P.S.M. and Ahmad, F. (2016) Processing of rice husk tobio-silica nanoparticlesthrough thermal combustion. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7650-7654.

Keong, W.T. and Ahmad, F. and Sharif, S. and Moinser, M.A. (2016) Response surface methodology integrated modeling of glass fiber reinforced polymer delamination in high speed drilling. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4176-4185.

Gillani, Q.F. and Ahmad, F. and Mutlib, M.I.A. and Melor, P.S. and Arogundade, A. (2016) Synergistic effects of zinc borate and halloysite nanotubes (HNTS) on char morphology and gases emission of epoxy based intumescent fire retardant systems. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12053-12057.

Jan, M.T. and Ahmad, F. and Hamid, N.H.B. and Md Khir, M.H.B. and Ashraf, K. and Shoaib, M. (2016) Temperature dependent Young's modulus and quality factor of CMOS-MEMS resonator: Modelling and experimental approach. Microelectronics Reliability, 57. pp. 64-70.

Lock, S.S.M. and Lau, K.K. and Ahmad, F. and Shariff, A.M. (2015) Modeling, simulation and economic analysis of CO2 capture from natural gas using cocurrent, countercurrent and radial crossflow hollow fiber membrane. International Journal of Greenhouse Gas Control, 36. pp. 114-134.

Rafiq, S. and Maulud, A. and Man, Z. and Mutalib, M.I.A. and Ahmad, F. and Khan, A.U. and Khan, A.L. and Ghauri, M. and Muhammad, N. (2015) Modelling in mixed matrix membranes for gas separation. Canadian Journal of Chemical Engineering, 93 (1). pp. 88-95.

Dennis, J.O. and Ahmad, F. and Md Khir, M.B. and Hamid, N.H.B. (2015) Optical characterization of lorentz force based CMOS-MEMS magnetic field sensor. Sensors (Switzerland), 15 (8). pp. 18256-18269.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Raza, M.R. (2015) Thermal conductivity of powder injection molded carbon nanotube-reinforced copper-matrix composites. International Journal of Powder Metallurgy, 51 (1). pp. 57-66.

Mebrahitom Asmelash, G. and Mamat, O. and Ahmad, F. and Prasada Rao, A.K. (2015) Thermal shock and fatigue behavior of pressureless sintered Al2O3â��SiO2â��ZrO2 composites. Journal of Advanced Ceramics, 4 (3). pp. 190-198.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Megat Yusoff, P.S.M. and Raza, M.R. (2014) Homogeneous distribution of carbon nanotubes in copper matrix nanocomposites fabricated via combined technique. Nanoscience and Nanotechnology Letters, 6 (10). pp. 865-874.

Irshad, M.I. and Ahmad, F. and Mohamed, N.M. and Abdullah, M.Z. (2014) Preparation and structural characterization of template assisted electrodeposited copper nanowires. International Journal of Electrochemical Science, 9 (5). pp. 2548-2555.

Ullah, S. and Ahmad, F. and Shariff, A.M. and Bustam, M.A. (2014) Synergistic effects of kaolin clay on intumescent fire retardant coating composition for fire protection of structural steel substrate. Polymer Degradation and Stability, 110. pp. 91-103.

Samer, A. and Ali, M. and Basu, P. and Ahmad, F. (2014) Wear resistance of Al-12Si alloys by reinforcing TiC and TiN particles. Journal of Engineering Mechanics, 140 (6).

Zia-ul-Mustafa, M. and Ahmad, F. and Megat-Yusoff, P.S.M. and Aziz, H. (2014) The effect of wollastonite filler on thermal performance of intumescent fire retardant coating. Advanced Materials Research, 970. pp. 328-331.

Ullah, S. and Nadeem, M. and Shariff, A.B.M. and Ahmad, F. and Shahid, S.A. and Sagir, M. and Raza Malik, M.R. and Mushtaq, M. (2014) The synergistic effect of thiourea and surfactants on corrosion inhibition of stainless steel-316 in hydrochloric acid. Advanced Materials Research, 917. pp. 28-34.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Raza, M.R. (2013) Fabrication and microstructural analysis of CNTs reinforced copper matrix nanocomposites via MIM technique. Applied Mechanics and Materials, 459. pp. 11-17.

Raza, M.R. and Ahmad, F. and Mamat, O. and Omar, M.A. and German, RM and Muhsan, A.S. (2012) Effects of Sintering Temperature and Cooling Rate on Mechanical Properties of Powder Injection Molded 316L Stainless Steel. Solid State Phenomena, 185. pp. 102-105.

Conference or Workshop Item

Ali, A. and Ud-Din, S. and Saad, S. and Ammad, S. and Rasheed, K. and Ahmad, F. (2021) Artificial Neural Network Approach to Study the Effect of Driver Characteristics on Road Traffic Accidents. In: UNSPECIFIED.

Kabeb, S.M. and Hassan, A. and Mohamad, Z. and Sharer, Z. and Ahmad, F. (2021) Intumescent flame retardant coating based graphene oxide and halloysite nanotubes. In: UNSPECIFIED.

Ayub, S. and Guan, B.H. and Ahmad, F. and Nisa, Z.U. (2021) A Shear Mixing approach in Polymer Composite Formation. In: UNSPECIFIED.

Kabeb, S.M. and Hassan, A. and Mohamad, Z. and Sharer, Z. and Mokhtar, M. and Ahmad, F. (2021) Sustainable flame retardant coating based graphene oxide and montmorillonite. In: UNSPECIFIED.

Nisa, Z.U. and Chuan, L.K. and Ayub, S. and Guan, B.H. and Ahmad, F. (2021) Thermal and Morphological Characterization of Coagulation-Processed Nanocomposite of Polypropylene and Bio-nanocarbon obtained from Bamboo. In: UNSPECIFIED.

Ayub, S. and Guan, B.H. and Ahmad, F. (2020) Graphene and Iron based composites as EMI shielding: A Systematic Review. In: UNSPECIFIED.

Mohamad, W.F. and Khan, A.A. and Ahmad, F. and Yassin, A. (2016) Physical and Mechanical Properties of Ni-Cr based composites with addition of solid lubricants produced through powder metallurgy process. In: UNSPECIFIED.

Altaf, K. and Rani, A.M.A. and Ahmad, F. and Aslam, M. (2016) Rapid tooling for powder injection moulding process. In: UNSPECIFIED.

Bhat, A.H. and Dasan, Y.K. and Khan, I.U. and Ahmad, F. and Ayoub, M. (2016) Topological characterization of nanocrystalline cellulose reinforced Poly (lactic acid) and Poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) bionanocomposites. In: UNSPECIFIED.

Ahmad, F. and Aslam, M. and Altaf, K. and Shirazi, I. (2015) Effects of mold geometry on fiber orientation of powder injection molded metal matrix composites. In: UNSPECIFIED.

Aziz, H. and Ahmad, F. and Yusoff, P.S.M.M. and Zia-ul-Mustafa, M. (2015) Fire performance, microstructure and thermal degradation of an epoxy based nano intumescent fire retardant coating for structural applications. In: UNSPECIFIED.

Amir, N. and Othman, W.M.S.W. and Ahmad, F. (2015) Fire resistance properties of ceramic wool fiber reinforced intumescent coatings. In: UNSPECIFIED.

Irshad, M.I. and Ahmad, F. and Mohamed, N.M. and Abdullah, M.Z. and Yar, A. (2015) Microscopic and magnetic properties of template assisted electrodeposited iron nanowires. In: UNSPECIFIED.

Shirazi, I. and Ahmad, F. and Raza, M.R. and Muhsan, A.S. and Aslam, M. (2015) Shear controlled alignment of short carbon fibers in copper matrix composite green samples produced by powder injection molding. In: UNSPECIFIED.

Zia-ul-Mustafa, M. and Ahmad, F. and Megat-Yusoff, P.S.M. and Aziz, H. (2015) Synergistic effects of mica and wollastonite fillers on thermal performance of intumescent fire retardant coating. In: UNSPECIFIED.

Ahmad, F. and Ullah, S. and Aziz, H. and Omar, N.S. (2015) Thermal performance of glass fiber reinforced intumescent fire retardant coating for structural applications. In: UNSPECIFIED.

Aziz, H. and Ahmad, F. and Binti Megat Yusoff, P.S.M. and Zia-Ul-Mustafa, M. (2014) Effect of kaolin clay and alumina on thermal performance and char morphology of intumescent fire retardant coating. In: UNSPECIFIED.

Aslam, M. and Ahmad, F. and Bintimegat Yusoff, P.S.M. and Muhamad, N. and Raza, M.R. and Irfan Shirazi, M. (2014) Effects of admixed titanium on densification of 316L stainless steel powder during sintering. In: UNSPECIFIED.

Keong, W.T. and Ahmad, F. and Sharif, S. and Moinser, M.A. (2014) Evaluate of the effects of drilling with varying spindle speed using different thickness of GFRP on the damage factor. In: UNSPECIFIED.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Yusoff, P.S.M.M. and Raza, M.R. and Afrooz, I.E. (2014) Experimental preparation and numerical simulation of high thermal conductive Cu/CNTs Nanocomposites. In: UNSPECIFIED.

Maoinser, M.A. and Ahmad, F. and Sharif, S. and Keong, W.T. (2014) Minimizing drilling thrust force for HFRP composite by optimizing process parameters using combination of ANOVA Approach and S/N ratios analysis. In: UNSPECIFIED.

Ahmad, F. and Dennis, J.O. and Khir, M.H.B.M. and Bin Hamid, N.H. and Yar, A. (2014) Modeling and simulation of two modes of vibration in MEMS devices based on embedded piezoresistors. In: UNSPECIFIED.

Irfan Shirazi, M. and Ahmad, F. and Rafi Raza, M. and Muhsan, A.S. and Omer, M.A. and Aslam, M. (2014) Orientation of carbon fibers in copper matrix produced by powder injection molding. In: UNSPECIFIED.

Ahmad, F. and Ullah, S. and Mohammad, W.F. and Shariff, M.F. (2014) Thermal performance of alumina filler reinforced intumescent fire retardant coating for structural application. In: UNSPECIFIED.

Zia-Ul-Mustafa, M. and Ahmad, F. and Megat-Yusoff, P.S.M. and Aziz, H. (2014) The effect of particle size of wollastonite filler on thermal performance of intumescent fire retardant coating. In: UNSPECIFIED.

Afrooza, I.E. and Binti Megat Yusoff, P.S.M. and Ahmad, F. and Muhsan, A.S. (2014) A numerical analysis for predicting the thermal conductivity of carbon nanotube reinforced copper-matrix nanocomposites. In: UNSPECIFIED.

Book

Ahmed, S. and Ibrahim, M. and Ahmad, F. and Rana, H.A. and Rao, T. and Anwar, W. and Younus, M. and Ahmad, W. and Farooqi, S.H. and Aftab, A. and Hussain, M. and Khalid, M. and Kamal, G.M. (2019) Microbial risk assessment and antimicrobial resistance. Elsevier, pp. 313-330.

Citation Index Journal

Nanimina, A.M. and Abdul-Rani, A.M. and Ahmad, F. and Zainuddin , A. and Lo, S.H.J. (2011) Effects of Electro-discharge Machining on Aluminium Metal Matrix Composite. [Citation Index Journal]

This list was generated on Tue Dec 24 02:24:06 2024 +08.