Items where Author is "Abdul Karim, Z. A."

Aja, Ogboo Chikere and Al-Kayiem, Hussain H. and Abdul Karim, Z. A. (2013) Experimental investigation of the effect of wind speed and wind direction on a solar chimney power plant. In: Sustainable City VIII. WIT Transaction on Ecology and the Environment, , II (179). WIT Press, UK, pp. 945-955. ISBN 978-1-84565-887-9

Nordin, Normayati and Abdul Karim, Z. A. and Othman, Safiah and Raghavan, V. R. (2013) Design and Development of Low Subsonic Wind Tunnel for Turning Diffuser Application. Advanced Materials Research, 614. pp. 586-591. ISSN 1662-8985

Mahgoub, B. K. M. and Sulaiman, S. A. and Abdul Karim, Z. A. (2013) Performance of a Compression Ignition Engine Fuelled by Diesel and Imitated Syngas. Asian Journal of Scientific Research, 6 (3). pp. 456-466. ISSN 19921454

Mahgoub, B. K. M. and Sulaiman, S. A. and Abdul Karim, Z. A. (2013) Performance of a Compression ignition Engine Fuelled by Diesel and Imitated Syngas. Asian Journal of Scientific Research, 6 (3). pp. 456-466. ISSN 1992-1454

Nordin, Normayati and Raghavan, V. R. and Othman, Safiah and Abdul Karim, Z. A. (2012) COMPATIBILITY OF 3-D TURNING DIFFUSERS BY MEANS OF VARYING AREA RATIOS AND OUTLET-INLETCONFIGURATIONS. [Citation Index Journal]

Sahirman, Sidharta and Saparso, . and Sarjito, Agus and Awang, Mokhtar and Abdul Karim, Z. A. and Sulaiman, S. A. (2012) Economic Viability Study of Palm-Oil Biodiesel. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Mahgoub, B. K. M. and Sulaiman, S. A. and Abdul Karim, Z. A. (2012) Performance of a compression ignition engine fuelled by diesel and imitated syngas. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Abdul Karim, Z. A. and Mohd Azmi, Mohd Norshahrul Hafizi and Abdullah, Ahmad Shafawi (2012) Design of a Heat Exchanger for Gas Turbine Inlet Air using Chilled Water System. Energy Procedia, 14 (iii-xi). pp. 1689-1694. ISSN 1876-6102

Nordin, Normayati and Raghavan, Vijay R. and Othman, Safiah and Abdul Karim, Z. A. (2012) Numerical Investigation of Turning Diffuser Performance by Varying Geometric and Operating Parameters. Applied Mechanics and Materials, 229-31. pp. 2086-2093. ISSN 1660-9336

Al-Wakeel, Haitham and Abdul Karim, Z. A. and Mat Jamlus, M. H. (2012) Soot Reduction Strategy: A Review. Journal of Applied Sciences, 12 (23). pp. 2338-2345. ISSN 1812-5654

Al-Wakeel, H.B. and Abdul Karim, Z. A. and Al-Kayiem, Hussain H. (2012) Soot reduction strategy: A review. [Citation Index Journal]

Renganathan, Sumathi and Abdul Karim, Z. A. and Chong, Su Li (2012) Students’ perception of industrial internship programme. Education + Training, 54 (2/3). pp. 180-191. ISSN 0040-0912

Nordin, Normayati and Othman, Safiah and Raghavan, Vijay R. and Abdul Karim, Z. A. (2012) Verification of 3-D Stereoscopic PIV Operation and Procedures. [Citation Index Journal]

Mahgoub, B. K. M. and Sulaiman, S. A. and Abdul Karim, Z. A. (2011) Emission of a Compression Ignition Engine Fuelled by Diesel and Imitated Syngas. In: 4th International Meeting on Advances in Thermofluids (IMAT), Melaka.

Aja, Ogboo Chikere and Al-Kayiem, Hussain H. and Abdul Karim, Z. A. (2011) Thermal Field Study and Analysis in Hybrid Solar Flue Gas Chimney Power Plant. In: National Postgraduate Conference 2011 (NPC 2011), 19-20 Sept 2011, Universiti Teknologi PETRONAS, Tronoh, Perak, MALAYSIA.

Aja, Ogboo Chikere and Al-Kayiem, Hussain H. and Abdul Karim, Z. A. (2011) CFD Simulation and Analysis of Thermal Diffuser for High Temperature Flue Gases. In: International Renewable Energy and Environment Conference (IREEC 2011), 24 26 June 2011, Kuala Lumpur, Malaysia .

Nugroho, Gunawan and A.M.S., Ali and Abdul Karim, Z. A. (2011) The Navier-Stokes Equations: On Special Classes and Properties of Exact Solutions of 3D Incompressible Flows. LAP LAMBERT Academic Publishing, Germany. ISBN 978-3838376943

Anbese, Yohannes T. and A.R.A., Aziz and Abdul Karim, Z. A. (2011) Flame Development Study at Variable Swirl Level Flows in a Stratified CNG DI Combustion Engine using Image Processing Technique. [Citation Index Journal]

Aja, Ogboo Chikere and Al-Kayiem, Hussain H. and Abdul Karim, Z. A. (2011) Review on the Enhancement Techniques and Introduction of an Alternate Enhancement Technique of Solar Chimney Power Plant. [Citation Index Journal]

Abdul Karim, Z. A. and Yongo A., Philip Waden (2011) Analytical Models for Energy Audit of Cogeneration Plant. [Citation Index Journal]

Abdul Karim, Z. A. (2011) Chapter 3 Fundamentals of Gas District Cooling in Gas District Cooling in Malaysia. In: Gas District Cooling in Malaysia. LAP LAMBERT Academic Publishing GmbH & Co., Germany, pp. 41-53. ISBN 978-3-8465-5441-8

Devarajan, R. and Mahendran, S. and Abdul Karim, Z. A. and Nagarajan, T. (2011) Design of Valve Less Micropump Using Preliminary Characteristics from Fluid Flow. [Citation Index Journal]

Lai, Fong Woon and Johl, Satirenjit Kaur and Abdul Karim, Z. A. (2011) Examining a Successful Industrial Training Program Model: Inter-relationship Among the Three Main Stakeholders: Students, University and Host Companies. Review of Higher Education and Self-Learning – RHESL, 4 (8). pp. 16-26. ISSN 1940-9494 (Print) 1940-9508 (Online)

Sulaiman, S. A. and Murad, S. H. M. and Ibrahim, Idris and Abdul Karim, Z. A. (2010) STUDY OF FLOW IN AIR-INTAKE SYSTEM FOR A SINGLE-CYLINDER GO-KART ENGINE. [Citation Index Journal]

Nugroho, Gunawan and A.M.S., Ali and Abdul Karim, Z. A. (2010) A CLASS OF EXACT SOLUTION TO THE THREE-DIMENSIONAL INCOMPRESSIBLE NAVIER-STOKES EQUATIONS. Applied Mathematics Letters, 23 (11). pp. 1388-1396. ISSN 8939659

Nugroho, G. and A.M.S., Ali and Abdul Karim, Z. A. (2010) PROPERTIES OF curl(phi) AND grad(phi)+curl(phi) CLASSES OF SOLUTION TO THE THREE-DIMENSIONAL INCOMPRESSIBLE NAVIER-STOKES EQUATIONS. International Journal of Applied Mathematics and Mechanics, 6 (11). pp. 98-117. ISSN 0973-0184

Nugroho, Gunawan and Ali, A.M.S. and Abdul Karim, Z. A. (2010) A Short Review on the Analytical Methods in Fluid Dynamics Research: The Importance of Exact Solutions. In: 2nd International Conference on Plant Equipment and Reliability, 15-17 June 2010, Kuala Lumpur Convention Centre.

Anbese, Yohannes Timarat and Abdul Aziz, A. R. and Abdul Karim, Z. A. (2009) Flame development characteristics at variable swirl level inductions in a stratified CNG direct injection combustion engine. [Citation Index Journal]

Abdul Karim, Z. A. (2009) Development of Valve Less Micropump Preliminary Characteristics from Fluid Flow. In: 11th International Conference on Electronics & Packaging 2009, 1-3 Dec 2009, Penang.

Ibrahim, M Yussoff and Khalid Ali, Khalidah and Abdul Karim, Z. A. (2009) Level of Business Acumen of UTP Interns – Students’ vs. Supervisors’ Perspectives. In: Regional Conference on The Humanities 2009, 18-19 Feb 2009, UTP.

Abdul Karim, Z. A. (2009) MEASURING THE SUCCESS OF INDUSTRIAL INTERNSHIP PROGRAMME FOR UNDERGRADUATE STUDY. In: International Engineering Education Conference 2009, 16-19 May 2009, Madinah, Kingdom of Saudi Arabia.

Nugroho, G. and Ali, A.M.S. and Abdul Karim, Z. A. (2009) On a Special Class of Analytical Solutions to the Three-Dimensional Incompressible Navier-Stokes Equations. Applied Mathematics Letters, 22 (11). pp. 1639-1644. ISSN 8939659

Nugroho, G. and Ali, A.M.S. and Abdul Karim, Z. A. (2009) Toward a New Simple Analytical Formulation of Navier Stokes Equations. International Journal of Mechanical Systems Science and Engineering, 1 (2). pp. 71-75. ISSN 2070-3929

Abdul Karim, Z. A. and Yongo A., Philip Waden (2008) Development of Analytical Model for Energy Audit of Refrigeration Systems. In: 4th International Conference on Cooling and Heating Technologies, 28-31 Oct 2008, Jinhae City, Korea.

Elsaied, Waiel Kamal and Abdul Karim, Z. A. (2008) Development of a Simulation Program to Determine the Performance of Gas Turbine. In: International Conference on Plant Equipment and Reliability (ICPER), March 2008, Sunway, Malaysia.

Nugroho, G. and A.M.S., Ali and Abdul Karim, Z. A. (2008) Empirical Reaction and Diffusion Models for Large Eddy Simulation (LES) of Low Velocity Hydrogen Diffusion Flame. In: International Conference on Plant Equipment and Reliability (ICPER), March 2008, Sunway, Malaysia.

Abdul Karim, Z. A. and Philip Waden, Augustino Yongo (2008) Development of Analytical Model for Energy Audit of Cogeneration Plant. In: 2nd Engineering Conference (ENCON 2008), 18-19 December 2008, Kuching, Sarawak.

Abdul Karim, Z. A. (2008) EFFECT OF INLET AIR COOLING ON GAS TURBINE PERFORMANCE. In: International Conference on Mechanical and Manufacturing Engineering, May 2008, Johor Bahru, Malaysia.

Sulaiman, S. A. and Abdul Karim, Z. A. and Lawes, M. (2008) Laser Attenuation Technique for Measurements of Droplets in a Turbulent Fuel-Air Aerosol Mixture. In: International Conference on Mechanical and Manufacturing Engineering, May 2008, Johor Bahru, Malaysia.

Fong Woon, Lai and Abdul Karim, Z. A. and Johl, Satirenjit Kaur (2007) Examining a Successful Industrial Training Program Model: Inter-relationship Among the Three Main Stakeholders: Students, University and Host Companies. In: 2nd. Regional Conference on Engineering Education, 3-5 December 2007, Johor Bahru.

Abdul Karim, Z. A. and Renganathan, Sumathi and Su Li, Chong (2007) The Importance of Industrial Internship Programme in Engineering Education: Some Critical Success Factors. In: 2nd. Regional Conference on Engineering Education, 3-5 December, 2007, Johor Bahru.

Abdul Karim, Z. A. and Sulaiman, S. A. (2007) Fuel Injection Rate Characteristics and Their Effects on Pollutant Emissions in Diesel Engine. In: 3rd World Engineering Congress, August 2007, Penang, Malaysia.

Sulaiman, S. A. and Lawes, M. and Hassan, S. and Abdul Karim, Z. A. (2007) High-Speed Schlieren Imaging of Spherically Propagating Laminar Flames of Iso-Octane-Air Aerosol Mixtures. In: 3rd World Engineering Congress, Penang, August 2007, Penang, Malaysia.

Sulaiman, S. A. and Abdul Karim, Z. A. and Said, M. A. M. and Shazi, R. I. and Lawes, M. (2007) Light Extinction Technique for Measurements of Droplets in a Quiescent Fuel-Air Aerosol Mixture. In: Curtin University of Technology Sarawak Engineering Conference (CUTSE), November 2007, Miri, Sarawak.

Abdul Karim, Z. A. and Sulaiman, S. A. and Samni, Z. A. (2007) Performance Analysis of Multi-hole DI Diesel Injectors using Heat Release Rate Modelling. In: Curtin University of Technology Sarawak Engineering Conference (CUTSE), November 2007, Miri, Sarawak.