Items where Author is "Abdul Karim, Z.A."

Group by: Item Type | No Grouping
Number of items: 36.

Article

Syed Masharuddin, S.M. and Abdul Karim, Z.A. and Meor Said, M.A. and Amran, N.H. and Ismeal, M.A. (2023) Determining the Influencing Factors for Micro-Explosion of Emulsified Biodiesel Fuel. Lecture Notes in Mechanical Engineering. pp. 133-146.

Abdul Karim, Z.A. and Baheta, A.T. and Milad, M.F.D. (2023) Development of Model and Program for Prediction of Gas Turbine Design Point Unknown Parameters. Lecture Notes in Mechanical Engineering. pp. 161-169.

Amran, N.H. and Abdul Karim, Z.A. and Martang, M.N.I. and Dalha, I.B. (2023) Examining Combustion Characteristics of Water-In-Palm Oil Biodiesel Emulsified Fuels for Micro-Explosion. Lecture Notes in Mechanical Engineering. pp. 107-121.

Said, M.A. and Dalha, I.B. and Abdul Karim, Z.A. and El-Adawy, M. (2022) Influence of biogas mixing parameters on the combustion and emission characteristics of diesel RCCI engine. Alexandria Engineering Journal, 61 (2). pp. 1479-1497.

Said, M.A. and Dalha, I.B. and Abdul Karim, Z.A. and El-Adawy, M. (2022) Influence of biogas mixing parameters on the combustion and emission characteristics of diesel RCCI engine. Alexandria Engineering Journal, 61 (2). pp. 1479-1497.

Syed Masharuddin, S.M. and Abdul Karim, Z.A. and Meor Said, M.A. and Amran, N.H. and Ismael, M.A. (2022) The evolution of a single droplet water-in-palm oil derived biodiesel emulsion leading to micro-explosion. Alexandria Engineering Journal, 61 (1). pp. 541-547.

Dabbaghi, M.F. and Baharom, M.B. and Abdul Karim, Z.A. and A. Aziz, A.R. and Mohammed, S.E. and Zainal A., E.Z. (2021) Comparative evaluation of different heat transfer correlations on a single curved-cylinder spark ignition crank-rocker engine. Alexandria Engineering Journal, 60 (3). pp. 2963-2978.

Dalha, I.B. and Said, M.A. and Abdul Karim, Z.A. and El-Adawy, M. (2021) Effects of port mixing and high carbon dioxide contents on power generation and emission characteristics of biogas-diesel RCCI combustion. Applied Thermal Engineering, 198.

Said, M.A. and Dalha, I.B. and Abdul Karim, Z.A. and El-Adawy, M. (2021) Influence of biogas mixing parameters on the combustion and emission characteristics of diesel RCCI engine. Alexandria Engineering Journal.

Abdul Karim, Z.A. and Kaur, E. and Syed Masharuddin, S.M. and Khan, M.Y. and Hagos, F.Y. (2020) The characteristics of water-in-biodiesel emulsions produced using ultrasonic homogenizer. Alexandria Engineering Journal, 59 (1). pp. 227-237.

Dalha, I.B. and Said, M.A. and Abdul Karim, Z.A. and Mohammed, S.E. (2020) An experimental investigation on the influence of port injection at valve on combustion and emission characteristics of B5/biogas RCCI engine. Applied Sciences (Switzerland), 10 (2).

Abdul Karim, Z.A. and Khan, M.Y. and Aziz, A.R.A. (2019) Evolution of Microexplosion Phenomenon in Parent-Child Droplets of Water in Biodiesel Emulsions Enhanced by Different Surfactant Dosages and Hydrophilic-Lipophilic Balance Values. Journal of Energy Resources Technology, Transactions of the ASME, 141 (10).

Abdul Karim, Z.A. and Afiq Sidqi, M. and Majid, M.A.A. and Muhammad, M. and Aoki, H. and Xiaoming, Z. (2019) Exergy and regression analysis for optimization of electric chillers at a gas district cooling plant. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.3 S1). pp. 98-102.

Nordin, N. and Abdul Karim, Z.A. and Othman, S. and Raghavan, V.R. and Adzila, S. and Md Seri, S. and Md Taib, I. and Ramli, Y. (2017) Assessment of turbulence model performance adopted near wall treatment for a sharp 90° 3-D turning diffuser. Communications in Computer and Information Science, 751. pp. 259-273.

Tahan, M. and Muhammad, M. and Abdul Karim, Z.A. (2017) Performance evaluation of a twin-shaft gas turbine engine in mechanical drive service. Journal of Mechanical Science and Technology, 31 (2). pp. 937-948.

Yahaya Khan, M. and Abdul Karim, Z.A. and Aziz, A.R.A. and Heikal, M.R. and Crua, C. (2017) Puffing and microexplosion behavior of water in pure diesel emulsion droplets during leidenfrost effect. Combustion Science and Technology, 189 (7). pp. 1186-1197.

Tahan, M. and Muhammad, M. and Abdul Karim, Z.A. (2017) A multi-nets ANN model for real-time performance-based automatic fault diagnosis of industrial gas turbine engines. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39 (7). pp. 2865-2876.

Abdul Karim, Z.A. and Aiman, M.H. and Khan, M.Y. (2016) Efficacy of water-in-diesel emulsion to reduce exhaust gas pollutants of diesel engine. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14284-14289.

Muhammad, M.B and Sarwar, U. and Tahan, M.R. and Abdul Karim, Z.A. (2016) Fault diagnostic model for rotating machinery based on principal component analysis and neural network. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14327-14331.

Muhammad, M.B and Sarwar, U. and Tahan, M.R. and Abdul Karim, Z.A. (2016) Fault diagnostic model for rotating machinery based on principal component analysis and neural network. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14327-14331.

Tahan, M. and Sarwar, U. and Muhammad, M. and Abdul Karim, Z.A. (2016) Modeling and sensitivity analysis of a multi-nets anns model for real-time performance-based condition monitoring of an industrial gas turbine engine. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14269-14274.

Tahan, M. and Sarwar, U. and Muhammad, M. and Abdul Karim, Z.A. (2016) Modeling and sensitivity analysis of a multi-nets anns model for real-time performance-based condition monitoring of an industrial gas turbine engine. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14269-14274.

Khan, M.Y. and Abdul Karim, Z.A. and Aziz, A.R.A. (2016) An experimental investigation of microexplosion in bio fuel emulsion. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14303-14307.

Khan, M.Y. and Abdul Karim, Z.A. and Aziz, A.R.A. and Tan, I.M. (2015) A case study on preparation, stability and physical properties of water in diesel emulsion. ARPN Journal of Engineering and Applied Sciences, 10 (22). pp. 17289-17293.

Yahaya Khan, M. and Abdul Karim, Z.A. and Hagos, F.Y. and Aziz, A.R.A. and Tan, I.M. (2014) Current trends in water-in-diesel emulsion as a fuel. The Scientific World Journal, 2014.

Khan, M.Y. and Abdul Karim, Z.A. and Aziz, A.R.A. and Tan, I.M. (2014) Experimental investigation of microexplosion occurrence in water in diesel emulsion droplets during the leidenfrost effect. Energy and Fuels, 28 (11). pp. 7079-7084.

Aja, O.C. and Al-Kayiem, H.H. and Abdul Karim, Z.A. (2013) Analytical investigation of collector optimum tilt angle at low latitude. Journal of Renewable and Sustainable Energy, 5 (6).

Aja, O.C. and Al-Kayiem, H.H. and Abdul Karim, Z.A. (2013) Experimental investigation of the effect of wind speed and wind direction on a solar chimney power plant. WIT Transactions on Ecology and the Environment, 179 VO. pp. 945-955.

R , Devarajan and S, Mahendran and Abdul Karim, Z.A. and T, Nagarajan (2011) Design of Valveless Micropump using Preliminary Characteristics from Fluid Flow. Journal of Applied Sciences. ISSN 1812-5654

Conference or Workshop Item

Al-Wakeel, H.B. and Abdul Karim, Z.A. and Al-Kayiem, H.H. (2014) Electric field prediction using micro-plasma inside a microwave cavity for soot oxidation. In: UNSPECIFIED.

Khan, M.Y. and Abdul Karim, Z.A. and Aziz, A.R.A. and Tan, I.M. (2014) Performance and emission assessment of multi cylinder diesel engine using surfactant enhanced water in diesel emulsion. In: UNSPECIFIED.

Sarwar, U. and Muhammad, M.B. and Abdul Karim, Z.A. (2014) Time series method for machine performance prediction using condition monitoring data. In: UNSPECIFIED.

Book

Dalha, I.B. and Said, M.A. and Abdul Karim, Z.A. and Aziz, A.R.A. and Firmansyah and Abidin, E.Z.Z. and Ismael, M.A. (2019) Reactivity controlled compression ignition: An advanced combustion mode for improved energy efficiency. Springer Singapore, pp. 101-126.

Dalha, I.B. and Said, M.A. and Abdul Karim, Z.A. and Aziz, A.R.A. and Firmansyah and Abidin, E.Z.Z. and Ismael, M.A. (2019) Reactivity controlled compression ignition: An advanced combustion mode for improved energy efficiency. Springer Singapore, pp. 101-126.

Dalha, I.B. and Said, M.A. and Abdul Karim, Z.A. and Aziz, A.R.A. and Firmansyah and Abidin, E.Z.Z. and Ismael, M.A. (2019) Reactivity controlled compression ignition: An advanced combustion mode for improved energy efficiency. Springer Singapore, pp. 101-126.

Dalha, I.B. and Said, M.A. and Abdul Karim, Z.A. and Aziz, A.R.A. and Firmansyah and Abidin, E.Z.Z. and Ismael, M.A. (2019) Reactivity controlled compression ignition: An advanced combustion mode for improved energy efficiency. Springer Singapore, pp. 101-126.

This list was generated on Fri Mar 29 18:07:41 2024 +08.