Response surface optimization of hydrogen-rich syngas production by the catalytic valorization of greenhouse gases (CH4 and CO2) over Sr-promoted Ni/SBA-15 catalyst

Dry reforming of methane (DRM) which utilizes CO2 and CH4, is a more efficient and environmentally friendly syngas production method. However, since the technique is endothermic, catalyst deactivation from sintering and carbon deposition has prevented its industrial implementation. This study investigated the effect of Strontium (Sr) promoter on Ni-based catalyst synthesized on SBA-15 support via the impregnation method. The incorporation of Sr as a promoter has demonstrated distinct advantages, primarily attributed to its remarkable capability to inhibit carbon formation. This property imparts a notable enhancement in the stability of the catalyst, thereby extending its operational lifespan and maintaining consistent catalytic performance. The physicochemical properties of the fresh catalyst were observed by using various characterization techniques such as X-Ray diffraction (XRD) analysis, N2 physisorption analysis, field emission scanning electron microscopy (FESEM), and temperature programmed reduction using hydrogen as the probing gas (TPR-H2). The catalysts were tested in DRM reaction using a tubular fixed bed reactor at 800 °C with an equimolar feed ratio. Overall, 1 Sr promoted Ni/SBA-15 showed enhanced performance having CO2 and CH4 initial conversions of 88.5 and 96.5, respectively while remaining stable for 320 min on stream. Furthermore, the predicted optimal condition was 713.73 °C and a feed gas ratio (CH4:CO2) of 1.12, with CO2 and CH4 conversion rates of 69.59 and 84.83, respectively, resulting in an H2:CO ratio of 1.00. Slight differences from the predicted values were considered insignificant, validating the Srb catalyst at a 95 confidence level with a 5 likelihood of error in the RSM model. © 2023