Development of rubberized geopolymer interlocking bricks

Mohammed, B.S. and Liew, M.S. and S Alaloul, W. and Al-Fakih, A. and Ibrahim, W. and Adamu, M. (2018) Development of rubberized geopolymer interlocking bricks. Case Studies in Construction Materials, 8. pp. 401-408.

Full text not available from this repository.
Official URL: https://www.scopus.com/inward/record.uri?eid=2-s2....

Abstract

Waste tires contribute badly to the environment on a huge scale as they are bulky, non-biodegradable, and prone to fire and being a shelter for mosquitos and other insects. This paper reports on a novel approach towards the development of rubberized brick by utilizing crumb rubber as the sole fine aggregate in the production of geopolymer interlocking bricks. The response surface methodology (RSM) from Design Experts software has been used to determine the numbers of trial mixes and their corresponding ingredients. A total of thirteen trial mixes were carried out and tested for compressive strength and the RSM model was developed to predict the design mix based on the targeted compressive strength. The mix design was obtained to be an 18 M for NaOH and 0.8 solution to fly ash ratio. The geopolymer interlocking rubberized bricks were then produced and tested for compressive strength, dimension, modulus of rupture, water absorption, initial rate of absorption, and efflorescence. The geopolymer interlocking rubberised bricks presented a low compressive and flexural strength and a high-water absorption capacity. The bricks were rated as non-effloresced and classified as 3rd class bricks which can be used as non-load bearing material. It is recommended to utilize nano silica in order to increase the strength of the brick. © 2018

Item Type: Article
Impact Factor: cited By 1
Uncontrolled Keywords: Compressive strength; Drying; Fly ash; Geopolymers; Inorganic polymers; Rubber; Silica; Sodium hydroxide; Surface chemistry; Surface properties; Water absorption, Compressive and flexural strengths; Crumb rubber; Fine aggregates; Geopolymer; Initial rate of absorptions; Modulus of rupture; Non-load bearings; Response surface methodology, Brick
Depositing User: Mr Ahmad Suhairi Mohamed Lazim
Date Deposited: 26 Feb 2019 02:39
Last Modified: 26 Feb 2019 02:39
URI: http://scholars.utp.edu.my/id/eprint/20885

Actions (login required)

View Item
View Item