Kumar, P.S and Mannan, M.A. and Kurian, V.J. (2006) DUCTILITY OF HIGH PERFORMANCE CONCRETE BEAMS USING SANDSTONE AGGREGATES. In: 6th APSEC 2006, September 2006, Kuala Lumpur.

[thumbnail of Suresh-APSEC-2006.pdf] PDF
Restricted to Registered users only

Download (188kB) | Request a copy


Due to brittle nature, the extensive use of High Performance Concrete (HPC) in flexural members has been limited. An attempt has been made to improve the
ductility using crushed sandstone coarse aggregate and partial substitution of crushed sandstone sand as fine aggregate. Tests on the ductility behaviour of reinforced HPC beams under static loading are reported in this study. The beams were made from concrete compressive strength of 74 N/mm2 and 78 N/mm2. The tensile reinforcement
ratio varied in the range of 1.34% to 3.14 %. Tests results showed that the ductility indices sharply decreased with increased tension steel ratio. However, at low tension
steel ratio the curvature ductility was greater than 3 and it is sufficient to sustain moderate earthquakes. The end rotation of the beam is in the range of 0.028 rad/m to
0.043 rad/m. Substitution of sandstone mineral fillers and silica fume improved the flexural stiffness and rigidity. HPC made with sandstone aggregates provides weaker
bond in the interfacial zone with better energy dissipation. Hence, the ductility increased

Item Type: Conference or Workshop Item (Paper)
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
Departments / MOR / COE: Departments > Civil Engineering
Depositing User: Prof Dr Kurian V John
Date Deposited: 15 Apr 2010 02:45
Last Modified: 19 Jan 2017 08:27
URI: http://scholars.utp.edu.my/id/eprint/1236

Actions (login required)

View Item
View Item